1/*
2 * arch/v850/kernel/fpga85e2c.h -- Machine-dependent defs for
3 *	FPGA implementation of V850E2/NA85E2C
4 *
5 *  Copyright (C) 2002,03  NEC Electronics Corporation
6 *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
7 *
8 * This file is subject to the terms and conditions of the GNU General
9 * Public License.  See the file COPYING in the main directory of this
10 * archive for more details.
11 *
12 * Written by Miles Bader <miles@gnu.org>
13 */
14
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/init.h>
18#include <linux/mm.h>
19#include <linux/swap.h>
20#include <linux/bootmem.h>
21#include <linux/irq.h>
22#include <linux/bitops.h>
23
24#include <asm/atomic.h>
25#include <asm/page.h>
26#include <asm/machdep.h>
27
28#include "mach.h"
29
30extern void memcons_setup (void);
31
32
33#define REG_DUMP_ADDR		0x220000
34
35
36extern struct irqaction reg_snap_action; /* fwd decl */
37
38
39void __init mach_early_init (void)
40{
41	int i;
42	const u32 *src;
43	register u32 *dst asm ("ep");
44	extern u32 _intv_end, _intv_load_start;
45
46	/* Set bus sizes: CS0 32-bit, CS1 16-bit, CS7 8-bit,
47	   everything else 32-bit.  */
48	V850E2_BSC = 0x2AA6;
49	for (i = 2; i <= 6; i++)
50		CSDEV(i) = 0;	/* 32 bit */
51
52	/* Ensure that the simulator halts on a panic, instead of going
53	   into an infinite loop inside the panic function.  */
54	panic_timeout = -1;
55
56	/* Move the interrupt vectors into their real location.  Note that
57	   any relocations there are relative to the real location, so we
58	   don't have to fix anything up.  We use a loop instead of calling
59	   memcpy to keep this a leaf function (to avoid a function
60	   prologue being generated).  */
61	dst = 0x10;		/* &_intv_start + 0x10.  */
62	src = &_intv_load_start;
63	do {
64		u32 t0 = src[0], t1 = src[1], t2 = src[2], t3 = src[3];
65		u32 t4 = src[4], t5 = src[5], t6 = src[6], t7 = src[7];
66		dst[0] = t0; dst[1] = t1; dst[2] = t2; dst[3] = t3;
67		dst[4] = t4; dst[5] = t5; dst[6] = t6; dst[7] = t7;
68		dst += 8;
69		src += 8;
70	} while (dst < &_intv_end);
71}
72
73void __init mach_setup (char **cmdline)
74{
75	memcons_setup ();
76
77	/* Setup up NMI0 to copy the registers to a known memory location.
78	   The FGPA board has a button that produces NMI0 when pressed, so
79	   this allows us to push the button, and then look at memory to see
80	   what's in the registers (there's no other way to easily do so).
81	   We have to use `setup_irq' instead of `request_irq' because it's
82	   still too early to do memory allocation.  */
83	setup_irq (IRQ_NMI (0), &reg_snap_action);
84}
85
86void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
87{
88	*ram_start = ERAM_ADDR;
89	*ram_len = ERAM_SIZE;
90}
91
92void __init mach_sched_init (struct irqaction *timer_action)
93{
94	/* Setup up the timer interrupt.  The FPGA peripheral control
95	   registers _only_ work with single-bit writes (set1/clr1)!  */
96	__clear_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
97	__clear_bit (RPU_GTMC_CLK_BIT, &RPU_GTMC);
98	__set_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
99
100	/* We use the first RPU interrupt, which occurs every 8.192ms.  */
101	setup_irq (IRQ_RPU (0), timer_action);
102}
103
104
105void mach_gettimeofday (struct timespec *tv)
106{
107	tv->tv_sec = 0;
108	tv->tv_nsec = 0;
109}
110
111void machine_halt (void) __attribute__ ((noreturn));
112void machine_halt (void)
113{
114	for (;;) {
115		DWC(0) = 0x7777;
116		DWC(1) = 0x7777;
117		ASC = 0xffff;
118		FLGREG(0) = 1;	/* Halt immediately.  */
119		asm ("di; halt; nop; nop; nop; nop; nop");
120	}
121}
122
123void machine_restart (char *__unused)
124{
125	machine_halt ();
126}
127
128void machine_power_off (void)
129{
130	machine_halt ();
131}
132
133
134/* Interrupts */
135
136struct v850e_intc_irq_init irq_inits[] = {
137	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
138	{ "RPU", IRQ_RPU(0),	IRQ_RPU_NUM,	1, 6 },
139	{ 0 }
140};
141#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
142
143struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
144
145/* Initialize interrupts.  */
146void __init mach_init_irqs (void)
147{
148	v850e_intc_init_irq_types (irq_inits, hw_itypes);
149}
150
151
152/* An interrupt handler that copies the registers to a known memory location,
153   for debugging purposes.  */
154
155static void make_reg_snap (int irq, void *dummy, struct pt_regs *regs)
156{
157	(*(unsigned *)REG_DUMP_ADDR)++;
158	(*(struct pt_regs *)(REG_DUMP_ADDR + sizeof (unsigned))) = *regs;
159}
160
161static int reg_snap_dev_id;
162static struct irqaction reg_snap_action = {
163	make_reg_snap, 0, CPU_MASK_NONE, "reg_snap", &reg_snap_dev_id, 0
164};
165