1# BCM94712LGR DDR board as L2 switch 2# Copyright (C) 2010, Broadcom Corporation. All Rights Reserved. 3# 4# Permission to use, copy, modify, and/or distribute this software for any 5# purpose with or without fee is hereby granted, provided that the above 6# copyright notice and this permission notice appear in all copies. 7# 8# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 9# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 10# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY 11# SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 12# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION 13# OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN 14# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 15# $Id: bcm94712lgr-sw.txt,v 1.1 2004/06/30 22:47:34 Exp $ 16boardtype=0x0460 17boardnum=${serno} 18# Board revision 1.0 19boardrev=0x10 20boardflags=0x0618 21sromrev=2 22 23# MIPS clock frequency in MHz 24clkfreq=200 25 26# 32 MB DDR SDRAM (16 Meg x 16) 27sdram_init=0x000b 28sdram_config=0x0062 29sdram_refresh=0x0000 30sdram_ncdl=0 31 32# Ethernet w/BCM5325E switch 33et0macaddr=00:90:4c:88:${maclo} 34et0phyaddr=30 35et0mdcport=0 36 37# BCM5325E switch reset 38gpio6=robo_reset 39 40# Make the d11 i/f single band 41wl0id=0x4320 42 43# 4712 802.11g parameters 44il0macaddr=00:90:4c:89:${maclo} 45aa0=3 46ag0=2 47pa0maxpwr=60 48pa0itssit=62 49pa0b0=0x1599 50pa0b1=0xfad3 51pa0b2=0xfed4 52 53# Commons wireless parameters 54cctl=0 55ccode=0 56 57# Bootlaoder variables 58dl_ram_addr=a0001000 59os_ram_addr=80001000 60os_flash_addr=bfc40000 61lan_ipaddr=192.168.1.1 62lan_netmask=255.255.255.0 63scratch=a0180000 64boot_wait=on 65 66# Watchdog timer in ms 67watchdog=3000 68 69# Bootloader and OS glue 70landevs=et0 wl0 71wandevs= 72