1# BCM4712ap board with SDRAM memory 2# Copyright (C) 2010, Broadcom Corporation. All Rights Reserved. 3# 4# Permission to use, copy, modify, and/or distribute this software for any 5# purpose with or without fee is hereby granted, provided that the above 6# copyright notice and this permission notice appear in all copies. 7# 8# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 9# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 10# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY 11# SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 12# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION 13# OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN 14# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 15# $Id: bcm94712ap-sd.txt,v 1.21 2004/12/15 21:09:43 Exp $ 16boardtype=0x0445 17boardnum=${serno} 18# Board revision 2.5 19boardrev=0x25 20boardflags=0x0208 21sromrev=2 22 23# MIPS clock frequency in MHz 24clkfreq=200 25 26# 32/16 MB SDR SDRAM (16/8 Meg x 16) 27sdram_init=0x000a 28sdram_config=0x0022 29sdram_refresh=0x0000 30sdram_ncdl=0 31 32# Ethernet w/ac100 single phy 33et0macaddr=00:90:4c:68:${maclo} 34et0phyaddr=5 35et0mdcport=0 36 37# No eth1 38et1phyaddr=0x1f 39 40# 4712 802.11g parameters 41il0macaddr=00:90:4c:67:${maclo} 42aa0=3 43ag0=2 44pa0maxpwr=60 45pa0itssit=62 46pa0b0=0x152d 47pa0b1=0xfac8 48pa0b2=0xfe9d 49 50# Commons wireless parameters 51wl0gpio0=0xff 52wl0gpio1=0xff 53wl0gpio2=0xff 54wl0gpio3=0xff 55cctl=0 56ccode=0 57 58# Bootlaoder variables 59dl_ram_addr=a0001000 60os_ram_addr=80001000 61os_flash_addr=bfc40000 62lan_ipaddr=192.168.1.1 63lan_netmask=255.255.255.0 64scratch=a0180000 65boot_wait=on 66 67# Watchdog timer in ms 68watchdog=3000 69 70# glue between bootloader and OS 71landevs=et0 wl0 72wandevs= 73