1This is the buildsystem for the OpenWrt Linux distribution. 2 3Please use "make menuconfig" to configure your appreciated 4configuration for the toolchain and firmware. 5 6You need to have installed gcc, binutils, patch, bzip2, flex, 7make, gettext, pkg-config, unzip, libz-dev and libc headers. 8 9Run "./scripts/feeds update" to get the latest package definitions 10defined in feeds.conf / feeds.conf.default respectively 11and "./scripts/feeds install" to install symlinks into "package/feeds/*". 12 13Use "make menuconfig" to configure your image. 14 15Simply running "make" will build your firmware. 16It will download all sources, build the cross-compile toolchain, 17the kernel and all choosen applications. 18 19You can use "scripts/flashing/flash.sh" for remotely updating your embedded 20system via tftp. 21 22The OpenWrt system is documented in docs/. You will need a LaTeX distribution 23and the tex4ht package to build the documentation. Type "make -C docs/" to build it. 24 25To build your own firmware you need to have access to a Linux, BSD or MacOSX system 26(case-sensitive filesystem required). Cygwin will not be supported because of 27the lack of case sensitiveness in the file system. 28 29 30Sunshine! 31 Your OpenWrt Project 32 http://openwrt.org 33 34 35