1/* 2 * ALSA driver for ICEnsemble VT1724 (Envy24HT) 3 * 4 * Lowlevel functions for Infrasonic Quartet 5 * 6 * Copyright (c) 2009 Pavel Hofman <pavel.hofman@ivitera.com> 7 * 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 22 * 23 */ 24 25#include <asm/io.h> 26#include <linux/delay.h> 27#include <linux/interrupt.h> 28#include <linux/init.h> 29#include <linux/slab.h> 30#include <sound/core.h> 31#include <sound/tlv.h> 32#include <sound/info.h> 33 34#include "ice1712.h" 35#include "envy24ht.h" 36#include <sound/ak4113.h> 37#include "quartet.h" 38 39struct qtet_spec { 40 struct ak4113 *ak4113; 41 unsigned int scr; /* system control register */ 42 unsigned int mcr; /* monitoring control register */ 43 unsigned int cpld; /* cpld register */ 44}; 45 46struct qtet_kcontrol_private { 47 unsigned int bit; 48 void (*set_register)(struct snd_ice1712 *ice, unsigned int val); 49 unsigned int (*get_register)(struct snd_ice1712 *ice); 50 unsigned char *texts[2]; 51}; 52 53enum { 54 IN12_SEL = 0, 55 IN34_SEL, 56 AIN34_SEL, 57 COAX_OUT, 58 IN12_MON12, 59 IN12_MON34, 60 IN34_MON12, 61 IN34_MON34, 62 OUT12_MON34, 63 OUT34_MON12, 64}; 65 66static char *ext_clock_names[3] = {"IEC958 In", "Word Clock 1xFS", 67 "Word Clock 256xFS"}; 68 69/* chip address on I2C bus */ 70#define AK4113_ADDR 0x26 /* S/PDIF receiver */ 71 72/* chip address on SPI bus */ 73#define AK4620_ADDR 0x02 /* ADC/DAC */ 74 75 76/* 77 * GPIO pins 78 */ 79 80/* GPIO0 - O - DATA0, def. 0 */ 81#define GPIO_D0 (1<<0) 82/* GPIO1 - I/O - DATA1, Jack Detect Input0 (0:present, 1:missing), def. 1 */ 83#define GPIO_D1_JACKDTC0 (1<<1) 84/* GPIO2 - I/O - DATA2, Jack Detect Input1 (0:present, 1:missing), def. 1 */ 85#define GPIO_D2_JACKDTC1 (1<<2) 86/* GPIO3 - I/O - DATA3, def. 1 */ 87#define GPIO_D3 (1<<3) 88/* GPIO4 - I/O - DATA4, SPI CDTO, def. 1 */ 89#define GPIO_D4_SPI_CDTO (1<<4) 90/* GPIO5 - I/O - DATA5, SPI CCLK, def. 1 */ 91#define GPIO_D5_SPI_CCLK (1<<5) 92/* GPIO6 - I/O - DATA6, Cable Detect Input (0:detected, 1:not detected */ 93#define GPIO_D6_CD (1<<6) 94/* GPIO7 - I/O - DATA7, Device Detect Input (0:detected, 1:not detected */ 95#define GPIO_D7_DD (1<<7) 96/* GPIO8 - O - CPLD Chip Select, def. 1 */ 97#define GPIO_CPLD_CSN (1<<8) 98/* GPIO9 - O - CPLD register read/write (0:write, 1:read), def. 0 */ 99#define GPIO_CPLD_RW (1<<9) 100/* GPIO10 - O - SPI Chip Select for CODEC#0, def. 1 */ 101#define GPIO_SPI_CSN0 (1<<10) 102/* GPIO11 - O - SPI Chip Select for CODEC#1, def. 1 */ 103#define GPIO_SPI_CSN1 (1<<11) 104/* GPIO12 - O - Ex. Register Output Enable (0:enable, 1:disable), def. 1, 105 * init 0 */ 106#define GPIO_EX_GPIOE (1<<12) 107/* GPIO13 - O - Ex. Register0 Chip Select for System Control Register, 108 * def. 1 */ 109#define GPIO_SCR (1<<13) 110/* GPIO14 - O - Ex. Register1 Chip Select for Monitor Control Register, 111 * def. 1 */ 112#define GPIO_MCR (1<<14) 113 114#define GPIO_SPI_ALL (GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK |\ 115 GPIO_SPI_CSN0 | GPIO_SPI_CSN1) 116 117#define GPIO_DATA_MASK (GPIO_D0 | GPIO_D1_JACKDTC0 | \ 118 GPIO_D2_JACKDTC1 | GPIO_D3 | \ 119 GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK | \ 120 GPIO_D6_CD | GPIO_D7_DD) 121 122/* System Control Register GPIO_SCR data bits */ 123/* Mic/Line select relay (0:line, 1:mic) */ 124#define SCR_RELAY GPIO_D0 125/* Phantom power drive control (0:5V, 1:48V) */ 126#define SCR_PHP_V GPIO_D1_JACKDTC0 127/* H/W mute control (0:Normal, 1:Mute) */ 128#define SCR_MUTE GPIO_D2_JACKDTC1 129/* Phantom power control (0:Phantom on, 1:off) */ 130#define SCR_PHP GPIO_D3 131/* Analog input 1/2 Source Select */ 132#define SCR_AIN12_SEL0 GPIO_D4_SPI_CDTO 133#define SCR_AIN12_SEL1 GPIO_D5_SPI_CCLK 134/* Analog input 3/4 Source Select (0:line, 1:hi-z) */ 135#define SCR_AIN34_SEL GPIO_D6_CD 136/* Codec Power Down (0:power down, 1:normal) */ 137#define SCR_CODEC_PDN GPIO_D7_DD 138 139#define SCR_AIN12_LINE (0) 140#define SCR_AIN12_MIC (SCR_AIN12_SEL0) 141#define SCR_AIN12_LOWCUT (SCR_AIN12_SEL1 | SCR_AIN12_SEL0) 142 143/* Monitor Control Register GPIO_MCR data bits */ 144/* Input 1/2 to Monitor 1/2 (0:off, 1:on) */ 145#define MCR_IN12_MON12 GPIO_D0 146/* Input 1/2 to Monitor 3/4 (0:off, 1:on) */ 147#define MCR_IN12_MON34 GPIO_D1_JACKDTC0 148/* Input 3/4 to Monitor 1/2 (0:off, 1:on) */ 149#define MCR_IN34_MON12 GPIO_D2_JACKDTC1 150/* Input 3/4 to Monitor 3/4 (0:off, 1:on) */ 151#define MCR_IN34_MON34 GPIO_D3 152/* Output to Monitor 1/2 (0:off, 1:on) */ 153#define MCR_OUT34_MON12 GPIO_D4_SPI_CDTO 154/* Output to Monitor 3/4 (0:off, 1:on) */ 155#define MCR_OUT12_MON34 GPIO_D5_SPI_CCLK 156 157/* CPLD Register DATA bits */ 158/* Clock Rate Select */ 159#define CPLD_CKS0 GPIO_D0 160#define CPLD_CKS1 GPIO_D1_JACKDTC0 161#define CPLD_CKS2 GPIO_D2_JACKDTC1 162/* Sync Source Select (0:Internal, 1:External) */ 163#define CPLD_SYNC_SEL GPIO_D3 164/* Word Clock FS Select (0:FS, 1:256FS) */ 165#define CPLD_WORD_SEL GPIO_D4_SPI_CDTO 166/* Coaxial Output Source (IS-Link) (0:SPDIF, 1:I2S) */ 167#define CPLD_COAX_OUT GPIO_D5_SPI_CCLK 168/* Input 1/2 Source Select (0:Analog12, 1:An34) */ 169#define CPLD_IN12_SEL GPIO_D6_CD 170/* Input 3/4 Source Select (0:Analog34, 1:Digital In) */ 171#define CPLD_IN34_SEL GPIO_D7_DD 172 173/* internal clock (CPLD_SYNC_SEL = 0) options */ 174#define CPLD_CKS_44100HZ (0) 175#define CPLD_CKS_48000HZ (CPLD_CKS0) 176#define CPLD_CKS_88200HZ (CPLD_CKS1) 177#define CPLD_CKS_96000HZ (CPLD_CKS1 | CPLD_CKS0) 178#define CPLD_CKS_176400HZ (CPLD_CKS2) 179#define CPLD_CKS_192000HZ (CPLD_CKS2 | CPLD_CKS0) 180 181#define CPLD_CKS_MASK (CPLD_CKS0 | CPLD_CKS1 | CPLD_CKS2) 182 183/* external clock (CPLD_SYNC_SEL = 1) options */ 184/* external clock - SPDIF */ 185#define CPLD_EXT_SPDIF (0 | CPLD_SYNC_SEL) 186/* external clock - WordClock 1xfs */ 187#define CPLD_EXT_WORDCLOCK_1FS (CPLD_CKS1 | CPLD_SYNC_SEL) 188/* external clock - WordClock 256xfs */ 189#define CPLD_EXT_WORDCLOCK_256FS (CPLD_CKS1 | CPLD_WORD_SEL |\ 190 CPLD_SYNC_SEL) 191 192#define EXT_SPDIF_TYPE 0 193#define EXT_WORDCLOCK_1FS_TYPE 1 194#define EXT_WORDCLOCK_256FS_TYPE 2 195 196#define AK4620_DFS0 (1<<0) 197#define AK4620_DFS1 (1<<1) 198#define AK4620_CKS0 (1<<2) 199#define AK4620_CKS1 (1<<3) 200/* Clock and Format Control register */ 201#define AK4620_DFS_REG 0x02 202 203/* Deem and Volume Control register */ 204#define AK4620_DEEMVOL_REG 0x03 205#define AK4620_SMUTE (1<<7) 206 207/* 208 * Conversion from int value to its binary form. Used for debugging. 209 * The output buffer must be allocated prior to calling the function. 210 */ 211static char *get_binary(char *buffer, int value) 212{ 213 int i, j, pos; 214 pos = 0; 215 for (i = 0; i < 4; ++i) { 216 for (j = 0; j < 8; ++j) { 217 if (value & (1 << (31-(i*8 + j)))) 218 buffer[pos] = '1'; 219 else 220 buffer[pos] = '0'; 221 pos++; 222 } 223 if (i < 3) { 224 buffer[pos] = ' '; 225 pos++; 226 } 227 } 228 buffer[pos] = '\0'; 229 return buffer; 230} 231 232/* 233 * Initial setup of the conversion array GPIO <-> rate 234 */ 235static unsigned int qtet_rates[] = { 236 44100, 48000, 88200, 237 96000, 176400, 192000, 238}; 239 240static unsigned int cks_vals[] = { 241 CPLD_CKS_44100HZ, CPLD_CKS_48000HZ, CPLD_CKS_88200HZ, 242 CPLD_CKS_96000HZ, CPLD_CKS_176400HZ, CPLD_CKS_192000HZ, 243}; 244 245static struct snd_pcm_hw_constraint_list qtet_rates_info = { 246 .count = ARRAY_SIZE(qtet_rates), 247 .list = qtet_rates, 248 .mask = 0, 249}; 250 251static void qtet_ak4113_write(void *private_data, unsigned char reg, 252 unsigned char val) 253{ 254 snd_vt1724_write_i2c((struct snd_ice1712 *)private_data, AK4113_ADDR, 255 reg, val); 256} 257 258static unsigned char qtet_ak4113_read(void *private_data, unsigned char reg) 259{ 260 return snd_vt1724_read_i2c((struct snd_ice1712 *)private_data, 261 AK4113_ADDR, reg); 262} 263 264 265/* 266 * AK4620 section 267 */ 268 269/* 270 * Write data to addr register of ak4620 271 */ 272static void qtet_akm_write(struct snd_akm4xxx *ak, int chip, 273 unsigned char addr, unsigned char data) 274{ 275 unsigned int tmp, orig_dir; 276 int idx; 277 unsigned int addrdata; 278 struct snd_ice1712 *ice = ak->private_data[0]; 279 280 if (snd_BUG_ON(chip < 0 || chip >= 4)) 281 return; 282 /*printk(KERN_DEBUG "Writing to AK4620: chip=%d, addr=0x%x, 283 data=0x%x\n", chip, addr, data);*/ 284 orig_dir = ice->gpio.get_dir(ice); 285 ice->gpio.set_dir(ice, orig_dir | GPIO_SPI_ALL); 286 /* set mask - only SPI bits */ 287 ice->gpio.set_mask(ice, ~GPIO_SPI_ALL); 288 289 tmp = ice->gpio.get_data(ice); 290 /* high all */ 291 tmp |= GPIO_SPI_ALL; 292 ice->gpio.set_data(ice, tmp); 293 udelay(100); 294 /* drop chip select */ 295 if (chip) 296 /* CODEC 1 */ 297 tmp &= ~GPIO_SPI_CSN1; 298 else 299 tmp &= ~GPIO_SPI_CSN0; 300 ice->gpio.set_data(ice, tmp); 301 udelay(100); 302 303 /* build I2C address + data byte */ 304 addrdata = (AK4620_ADDR << 6) | 0x20 | (addr & 0x1f); 305 addrdata = (addrdata << 8) | data; 306 for (idx = 15; idx >= 0; idx--) { 307 /* drop clock */ 308 tmp &= ~GPIO_D5_SPI_CCLK; 309 ice->gpio.set_data(ice, tmp); 310 udelay(100); 311 /* set data */ 312 if (addrdata & (1 << idx)) 313 tmp |= GPIO_D4_SPI_CDTO; 314 else 315 tmp &= ~GPIO_D4_SPI_CDTO; 316 ice->gpio.set_data(ice, tmp); 317 udelay(100); 318 /* raise clock */ 319 tmp |= GPIO_D5_SPI_CCLK; 320 ice->gpio.set_data(ice, tmp); 321 udelay(100); 322 } 323 /* all back to 1 */ 324 tmp |= GPIO_SPI_ALL; 325 ice->gpio.set_data(ice, tmp); 326 udelay(100); 327 328 /* return all gpios to non-writable */ 329 ice->gpio.set_mask(ice, 0xffffff); 330 /* restore GPIOs direction */ 331 ice->gpio.set_dir(ice, orig_dir); 332} 333 334static void qtet_akm_set_regs(struct snd_akm4xxx *ak, unsigned char addr, 335 unsigned char mask, unsigned char value) 336{ 337 unsigned char tmp; 338 int chip; 339 for (chip = 0; chip < ak->num_chips; chip++) { 340 tmp = snd_akm4xxx_get(ak, chip, addr); 341 /* clear the bits */ 342 tmp &= ~mask; 343 /* set the new bits */ 344 tmp |= value; 345 snd_akm4xxx_write(ak, chip, addr, tmp); 346 } 347} 348 349/* 350 * change the rate of AK4620 351 */ 352static void qtet_akm_set_rate_val(struct snd_akm4xxx *ak, unsigned int rate) 353{ 354 unsigned char ak4620_dfs; 355 356 if (rate == 0) /* no hint - S/PDIF input is master or the new spdif 357 input rate undetected, simply return */ 358 return; 359 360 /* adjust DFS on codecs - see datasheet */ 361 if (rate > 108000) 362 ak4620_dfs = AK4620_DFS1 | AK4620_CKS1; 363 else if (rate > 54000) 364 ak4620_dfs = AK4620_DFS0 | AK4620_CKS0; 365 else 366 ak4620_dfs = 0; 367 368 /* set new value */ 369 qtet_akm_set_regs(ak, AK4620_DFS_REG, AK4620_DFS0 | AK4620_DFS1 | 370 AK4620_CKS0 | AK4620_CKS1, ak4620_dfs); 371} 372 373#define AK_CONTROL(xname, xch) { .name = xname, .num_channels = xch } 374 375#define PCM_12_PLAYBACK_VOLUME "PCM 1/2 Playback Volume" 376#define PCM_34_PLAYBACK_VOLUME "PCM 3/4 Playback Volume" 377#define PCM_12_CAPTURE_VOLUME "PCM 1/2 Capture Volume" 378#define PCM_34_CAPTURE_VOLUME "PCM 3/4 Capture Volume" 379 380static const struct snd_akm4xxx_dac_channel qtet_dac[] = { 381 AK_CONTROL(PCM_12_PLAYBACK_VOLUME, 2), 382 AK_CONTROL(PCM_34_PLAYBACK_VOLUME, 2), 383}; 384 385static const struct snd_akm4xxx_adc_channel qtet_adc[] = { 386 AK_CONTROL(PCM_12_CAPTURE_VOLUME, 2), 387 AK_CONTROL(PCM_34_CAPTURE_VOLUME, 2), 388}; 389 390static struct snd_akm4xxx akm_qtet_dac __devinitdata = { 391 .type = SND_AK4620, 392 .num_dacs = 4, /* DAC1 - Output 12 393 */ 394 .num_adcs = 4, /* ADC1 - Input 12 395 */ 396 .ops = { 397 .write = qtet_akm_write, 398 .set_rate_val = qtet_akm_set_rate_val, 399 }, 400 .dac_info = qtet_dac, 401 .adc_info = qtet_adc, 402}; 403 404/* Communication routines with the CPLD */ 405 406 407/* Writes data to external register reg, both reg and data are 408 * GPIO representations */ 409static void reg_write(struct snd_ice1712 *ice, unsigned int reg, 410 unsigned int data) 411{ 412 unsigned int tmp; 413 414 mutex_lock(&ice->gpio_mutex); 415 /* set direction of used GPIOs*/ 416 /* all outputs */ 417 tmp = 0x00ffff; 418 ice->gpio.set_dir(ice, tmp); 419 /* mask - writable bits */ 420 ice->gpio.set_mask(ice, ~(tmp)); 421 /* write the data */ 422 tmp = ice->gpio.get_data(ice); 423 tmp &= ~GPIO_DATA_MASK; 424 tmp |= data; 425 ice->gpio.set_data(ice, tmp); 426 udelay(100); 427 /* drop output enable */ 428 tmp &= ~GPIO_EX_GPIOE; 429 ice->gpio.set_data(ice, tmp); 430 udelay(100); 431 /* drop the register gpio */ 432 tmp &= ~reg; 433 ice->gpio.set_data(ice, tmp); 434 udelay(100); 435 /* raise the register GPIO */ 436 tmp |= reg; 437 ice->gpio.set_data(ice, tmp); 438 udelay(100); 439 440 /* raise all data gpios */ 441 tmp |= GPIO_DATA_MASK; 442 ice->gpio.set_data(ice, tmp); 443 /* mask - immutable bits */ 444 ice->gpio.set_mask(ice, 0xffffff); 445 /* outputs only 8-15 */ 446 ice->gpio.set_dir(ice, 0x00ff00); 447 mutex_unlock(&ice->gpio_mutex); 448} 449 450static unsigned int get_scr(struct snd_ice1712 *ice) 451{ 452 struct qtet_spec *spec = ice->spec; 453 return spec->scr; 454} 455 456static unsigned int get_mcr(struct snd_ice1712 *ice) 457{ 458 struct qtet_spec *spec = ice->spec; 459 return spec->mcr; 460} 461 462static unsigned int get_cpld(struct snd_ice1712 *ice) 463{ 464 struct qtet_spec *spec = ice->spec; 465 return spec->cpld; 466} 467 468static void set_scr(struct snd_ice1712 *ice, unsigned int val) 469{ 470 struct qtet_spec *spec = ice->spec; 471 reg_write(ice, GPIO_SCR, val); 472 spec->scr = val; 473} 474 475static void set_mcr(struct snd_ice1712 *ice, unsigned int val) 476{ 477 struct qtet_spec *spec = ice->spec; 478 reg_write(ice, GPIO_MCR, val); 479 spec->mcr = val; 480} 481 482static void set_cpld(struct snd_ice1712 *ice, unsigned int val) 483{ 484 struct qtet_spec *spec = ice->spec; 485 reg_write(ice, GPIO_CPLD_CSN, val); 486 spec->cpld = val; 487} 488#ifdef CONFIG_PROC_FS 489static void proc_regs_read(struct snd_info_entry *entry, 490 struct snd_info_buffer *buffer) 491{ 492 struct snd_ice1712 *ice = entry->private_data; 493 char bin_buffer[36]; 494 495 snd_iprintf(buffer, "SCR: %s\n", get_binary(bin_buffer, 496 get_scr(ice))); 497 snd_iprintf(buffer, "MCR: %s\n", get_binary(bin_buffer, 498 get_mcr(ice))); 499 snd_iprintf(buffer, "CPLD: %s\n", get_binary(bin_buffer, 500 get_cpld(ice))); 501} 502 503static void proc_init(struct snd_ice1712 *ice) 504{ 505 struct snd_info_entry *entry; 506 if (!snd_card_proc_new(ice->card, "quartet", &entry)) 507 snd_info_set_text_ops(entry, ice, proc_regs_read); 508} 509#else /* !CONFIG_PROC_FS */ 510static void proc_init(struct snd_ice1712 *ice) {} 511#endif 512 513static int qtet_mute_get(struct snd_kcontrol *kcontrol, 514 struct snd_ctl_elem_value *ucontrol) 515{ 516 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 517 unsigned int val; 518 val = get_scr(ice) & SCR_MUTE; 519 ucontrol->value.integer.value[0] = (val) ? 0 : 1; 520 return 0; 521} 522 523static int qtet_mute_put(struct snd_kcontrol *kcontrol, 524 struct snd_ctl_elem_value *ucontrol) 525{ 526 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 527 unsigned int old, new, smute; 528 old = get_scr(ice) & SCR_MUTE; 529 if (ucontrol->value.integer.value[0]) { 530 /* unmute */ 531 new = 0; 532 /* un-smuting DAC */ 533 smute = 0; 534 } else { 535 /* mute */ 536 new = SCR_MUTE; 537 /* smuting DAC */ 538 smute = AK4620_SMUTE; 539 } 540 if (old != new) { 541 struct snd_akm4xxx *ak = ice->akm; 542 set_scr(ice, (get_scr(ice) & ~SCR_MUTE) | new); 543 /* set smute */ 544 qtet_akm_set_regs(ak, AK4620_DEEMVOL_REG, AK4620_SMUTE, smute); 545 return 1; 546 } 547 /* no change */ 548 return 0; 549} 550 551static int qtet_ain12_enum_info(struct snd_kcontrol *kcontrol, 552 struct snd_ctl_elem_info *uinfo) 553{ 554 static char *texts[3] = {"Line In 1/2", "Mic", "Mic + Low-cut"}; 555 uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; 556 uinfo->count = 1; 557 uinfo->value.enumerated.items = ARRAY_SIZE(texts); 558 559 if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items) 560 uinfo->value.enumerated.item = 561 uinfo->value.enumerated.items - 1; 562 strcpy(uinfo->value.enumerated.name, 563 texts[uinfo->value.enumerated.item]); 564 565 return 0; 566} 567 568static int qtet_ain12_sw_get(struct snd_kcontrol *kcontrol, 569 struct snd_ctl_elem_value *ucontrol) 570{ 571 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 572 unsigned int val, result; 573 val = get_scr(ice) & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0); 574 switch (val) { 575 case SCR_AIN12_LINE: 576 result = 0; 577 break; 578 case SCR_AIN12_MIC: 579 result = 1; 580 break; 581 case SCR_AIN12_LOWCUT: 582 result = 2; 583 break; 584 default: 585 /* BUG - no other combinations allowed */ 586 snd_BUG(); 587 result = 0; 588 } 589 ucontrol->value.integer.value[0] = result; 590 return 0; 591} 592 593static int qtet_ain12_sw_put(struct snd_kcontrol *kcontrol, 594 struct snd_ctl_elem_value *ucontrol) 595{ 596 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 597 unsigned int old, new, tmp, masked_old; 598 old = new = get_scr(ice); 599 masked_old = old & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0); 600 tmp = ucontrol->value.integer.value[0]; 601 if (tmp == 2) 602 tmp = 3; /* binary 10 is not supported */ 603 tmp <<= 4; /* shifting to SCR_AIN12_SEL0 */ 604 if (tmp != masked_old) { 605 /* change requested */ 606 switch (tmp) { 607 case SCR_AIN12_LINE: 608 new = old & ~(SCR_AIN12_SEL1 | SCR_AIN12_SEL0); 609 set_scr(ice, new); 610 /* turn off relay */ 611 new &= ~SCR_RELAY; 612 set_scr(ice, new); 613 break; 614 case SCR_AIN12_MIC: 615 /* turn on relay */ 616 new = old | SCR_RELAY; 617 set_scr(ice, new); 618 new = (new & ~SCR_AIN12_SEL1) | SCR_AIN12_SEL0; 619 set_scr(ice, new); 620 break; 621 case SCR_AIN12_LOWCUT: 622 /* turn on relay */ 623 new = old | SCR_RELAY; 624 set_scr(ice, new); 625 new |= SCR_AIN12_SEL1 | SCR_AIN12_SEL0; 626 set_scr(ice, new); 627 break; 628 default: 629 snd_BUG(); 630 } 631 return 1; 632 } 633 /* no change */ 634 return 0; 635} 636 637static int qtet_php_get(struct snd_kcontrol *kcontrol, 638 struct snd_ctl_elem_value *ucontrol) 639{ 640 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 641 unsigned int val; 642 /* if phantom voltage =48V, phantom on */ 643 val = get_scr(ice) & SCR_PHP_V; 644 ucontrol->value.integer.value[0] = val ? 1 : 0; 645 return 0; 646} 647 648static int qtet_php_put(struct snd_kcontrol *kcontrol, 649 struct snd_ctl_elem_value *ucontrol) 650{ 651 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 652 unsigned int old, new; 653 old = new = get_scr(ice); 654 if (ucontrol->value.integer.value[0] /* phantom on requested */ 655 && (~old & SCR_PHP_V)) /* 0 = voltage 5V */ { 656 /* is off, turn on */ 657 /* turn voltage on first, = 1 */ 658 new = old | SCR_PHP_V; 659 set_scr(ice, new); 660 /* turn phantom on, = 0 */ 661 new &= ~SCR_PHP; 662 set_scr(ice, new); 663 } else if (!ucontrol->value.integer.value[0] && (old & SCR_PHP_V)) { 664 /* phantom off requested and 1 = voltage 48V */ 665 /* is on, turn off */ 666 /* turn voltage off first, = 0 */ 667 new = old & ~SCR_PHP_V; 668 set_scr(ice, new); 669 /* turn phantom off, = 1 */ 670 new |= SCR_PHP; 671 set_scr(ice, new); 672 } 673 if (old != new) 674 return 1; 675 /* no change */ 676 return 0; 677} 678 679#define PRIV_SW(xid, xbit, xreg) [xid] = {.bit = xbit,\ 680 .set_register = set_##xreg,\ 681 .get_register = get_##xreg, } 682 683 684#define PRIV_ENUM2(xid, xbit, xreg, xtext1, xtext2) [xid] = {.bit = xbit,\ 685 .set_register = set_##xreg,\ 686 .get_register = get_##xreg,\ 687 .texts = {xtext1, xtext2} } 688 689static struct qtet_kcontrol_private qtet_privates[] = { 690 PRIV_ENUM2(IN12_SEL, CPLD_IN12_SEL, cpld, "An In 1/2", "An In 3/4"), 691 PRIV_ENUM2(IN34_SEL, CPLD_IN34_SEL, cpld, "An In 3/4", "IEC958 In"), 692 PRIV_ENUM2(AIN34_SEL, SCR_AIN34_SEL, scr, "Line In 3/4", "Hi-Z"), 693 PRIV_ENUM2(COAX_OUT, CPLD_COAX_OUT, cpld, "IEC958", "I2S"), 694 PRIV_SW(IN12_MON12, MCR_IN12_MON12, mcr), 695 PRIV_SW(IN12_MON34, MCR_IN12_MON34, mcr), 696 PRIV_SW(IN34_MON12, MCR_IN34_MON12, mcr), 697 PRIV_SW(IN34_MON34, MCR_IN34_MON34, mcr), 698 PRIV_SW(OUT12_MON34, MCR_OUT12_MON34, mcr), 699 PRIV_SW(OUT34_MON12, MCR_OUT34_MON12, mcr), 700}; 701 702static int qtet_enum_info(struct snd_kcontrol *kcontrol, 703 struct snd_ctl_elem_info *uinfo) 704{ 705 struct qtet_kcontrol_private private = 706 qtet_privates[kcontrol->private_value]; 707 uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; 708 uinfo->count = 1; 709 uinfo->value.enumerated.items = ARRAY_SIZE(private.texts); 710 711 if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items) 712 uinfo->value.enumerated.item = 713 uinfo->value.enumerated.items - 1; 714 strcpy(uinfo->value.enumerated.name, 715 private.texts[uinfo->value.enumerated.item]); 716 717 return 0; 718} 719 720static int qtet_sw_get(struct snd_kcontrol *kcontrol, 721 struct snd_ctl_elem_value *ucontrol) 722{ 723 struct qtet_kcontrol_private private = 724 qtet_privates[kcontrol->private_value]; 725 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 726 ucontrol->value.integer.value[0] = 727 (private.get_register(ice) & private.bit) ? 1 : 0; 728 return 0; 729} 730 731static int qtet_sw_put(struct snd_kcontrol *kcontrol, 732 struct snd_ctl_elem_value *ucontrol) 733{ 734 struct qtet_kcontrol_private private = 735 qtet_privates[kcontrol->private_value]; 736 struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); 737 unsigned int old, new; 738 old = private.get_register(ice); 739 if (ucontrol->value.integer.value[0]) 740 new = old | private.bit; 741 else 742 new = old & ~private.bit; 743 if (old != new) { 744 private.set_register(ice, new); 745 return 1; 746 } 747 /* no change */ 748 return 0; 749} 750 751#define qtet_sw_info snd_ctl_boolean_mono_info 752 753#define QTET_CONTROL(xname, xtype, xpriv) \ 754 {.iface = SNDRV_CTL_ELEM_IFACE_MIXER,\ 755 .name = xname,\ 756 .info = qtet_##xtype##_info,\ 757 .get = qtet_sw_get,\ 758 .put = qtet_sw_put,\ 759 .private_value = xpriv } 760 761static struct snd_kcontrol_new qtet_controls[] __devinitdata = { 762 { 763 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 764 .name = "Master Playback Switch", 765 .info = qtet_sw_info, 766 .get = qtet_mute_get, 767 .put = qtet_mute_put, 768 .private_value = 0 769 }, 770 { 771 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 772 .name = "Phantom Power", 773 .info = qtet_sw_info, 774 .get = qtet_php_get, 775 .put = qtet_php_put, 776 .private_value = 0 777 }, 778 { 779 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, 780 .name = "Analog In 1/2 Capture Switch", 781 .info = qtet_ain12_enum_info, 782 .get = qtet_ain12_sw_get, 783 .put = qtet_ain12_sw_put, 784 .private_value = 0 785 }, 786 QTET_CONTROL("Analog In 3/4 Capture Switch", enum, AIN34_SEL), 787 QTET_CONTROL("PCM In 1/2 Capture Switch", enum, IN12_SEL), 788 QTET_CONTROL("PCM In 3/4 Capture Switch", enum, IN34_SEL), 789 QTET_CONTROL("Coax Output Source", enum, COAX_OUT), 790 QTET_CONTROL("Analog In 1/2 to Monitor 1/2", sw, IN12_MON12), 791 QTET_CONTROL("Analog In 1/2 to Monitor 3/4", sw, IN12_MON34), 792 QTET_CONTROL("Analog In 3/4 to Monitor 1/2", sw, IN34_MON12), 793 QTET_CONTROL("Analog In 3/4 to Monitor 3/4", sw, IN34_MON34), 794 QTET_CONTROL("Output 1/2 to Monitor 3/4", sw, OUT12_MON34), 795 QTET_CONTROL("Output 3/4 to Monitor 1/2", sw, OUT34_MON12), 796}; 797 798static char *slave_vols[] __devinitdata = { 799 PCM_12_PLAYBACK_VOLUME, 800 PCM_34_PLAYBACK_VOLUME, 801 NULL 802}; 803 804static __devinitdata 805DECLARE_TLV_DB_SCALE(qtet_master_db_scale, -6350, 50, 1); 806 807static struct snd_kcontrol __devinit *ctl_find(struct snd_card *card, 808 const char *name) 809{ 810 struct snd_ctl_elem_id sid; 811 memset(&sid, 0, sizeof(sid)); 812 strcpy(sid.name, name); 813 sid.iface = SNDRV_CTL_ELEM_IFACE_MIXER; 814 return snd_ctl_find_id(card, &sid); 815} 816 817static void __devinit add_slaves(struct snd_card *card, 818 struct snd_kcontrol *master, char **list) 819{ 820 for (; *list; list++) { 821 struct snd_kcontrol *slave = ctl_find(card, *list); 822 if (slave) 823 snd_ctl_add_slave(master, slave); 824 } 825} 826 827static int __devinit qtet_add_controls(struct snd_ice1712 *ice) 828{ 829 struct qtet_spec *spec = ice->spec; 830 int err, i; 831 struct snd_kcontrol *vmaster; 832 err = snd_ice1712_akm4xxx_build_controls(ice); 833 if (err < 0) 834 return err; 835 for (i = 0; i < ARRAY_SIZE(qtet_controls); i++) { 836 err = snd_ctl_add(ice->card, 837 snd_ctl_new1(&qtet_controls[i], ice)); 838 if (err < 0) 839 return err; 840 } 841 842 /* Create virtual master control */ 843 vmaster = snd_ctl_make_virtual_master("Master Playback Volume", 844 qtet_master_db_scale); 845 if (!vmaster) 846 return -ENOMEM; 847 add_slaves(ice->card, vmaster, slave_vols); 848 err = snd_ctl_add(ice->card, vmaster); 849 if (err < 0) 850 return err; 851 /* only capture SPDIF over AK4113 */ 852 err = snd_ak4113_build(spec->ak4113, 853 ice->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream); 854 if (err < 0) 855 return err; 856 return 0; 857} 858 859static inline int qtet_is_spdif_master(struct snd_ice1712 *ice) 860{ 861 /* CPLD_SYNC_SEL: 0 = internal, 1 = external (i.e. spdif master) */ 862 return (get_cpld(ice) & CPLD_SYNC_SEL) ? 1 : 0; 863} 864 865static unsigned int qtet_get_rate(struct snd_ice1712 *ice) 866{ 867 int i; 868 unsigned char result; 869 870 result = get_cpld(ice) & CPLD_CKS_MASK; 871 for (i = 0; i < ARRAY_SIZE(cks_vals); i++) 872 if (cks_vals[i] == result) 873 return qtet_rates[i]; 874 return 0; 875} 876 877static int get_cks_val(int rate) 878{ 879 int i; 880 for (i = 0; i < ARRAY_SIZE(qtet_rates); i++) 881 if (qtet_rates[i] == rate) 882 return cks_vals[i]; 883 return 0; 884} 885 886/* setting new rate */ 887static void qtet_set_rate(struct snd_ice1712 *ice, unsigned int rate) 888{ 889 unsigned int new; 890 unsigned char val; 891 /* switching ice1724 to external clock - supplied by ext. circuits */ 892 val = inb(ICEMT1724(ice, RATE)); 893 outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE)); 894 895 new = (get_cpld(ice) & ~CPLD_CKS_MASK) | get_cks_val(rate); 896 /* switch to internal clock, drop CPLD_SYNC_SEL */ 897 new &= ~CPLD_SYNC_SEL; 898 /* printk(KERN_DEBUG "QT - set_rate: old %x, new %x\n", 899 get_cpld(ice), new); */ 900 set_cpld(ice, new); 901} 902 903static inline unsigned char qtet_set_mclk(struct snd_ice1712 *ice, 904 unsigned int rate) 905{ 906 /* no change in master clock */ 907 return 0; 908} 909 910/* setting clock to external - SPDIF */ 911static int qtet_set_spdif_clock(struct snd_ice1712 *ice, int type) 912{ 913 unsigned int old, new; 914 915 old = new = get_cpld(ice); 916 new &= ~(CPLD_CKS_MASK | CPLD_WORD_SEL); 917 switch (type) { 918 case EXT_SPDIF_TYPE: 919 new |= CPLD_EXT_SPDIF; 920 break; 921 case EXT_WORDCLOCK_1FS_TYPE: 922 new |= CPLD_EXT_WORDCLOCK_1FS; 923 break; 924 case EXT_WORDCLOCK_256FS_TYPE: 925 new |= CPLD_EXT_WORDCLOCK_256FS; 926 break; 927 default: 928 snd_BUG(); 929 } 930 if (old != new) { 931 set_cpld(ice, new); 932 /* changed */ 933 return 1; 934 } 935 return 0; 936} 937 938static int qtet_get_spdif_master_type(struct snd_ice1712 *ice) 939{ 940 unsigned int val; 941 int result; 942 val = get_cpld(ice); 943 /* checking only rate/clock-related bits */ 944 val &= (CPLD_CKS_MASK | CPLD_WORD_SEL | CPLD_SYNC_SEL); 945 if (!(val & CPLD_SYNC_SEL)) { 946 /* switched to internal clock, is not any external type */ 947 result = -1; 948 } else { 949 switch (val) { 950 case (CPLD_EXT_SPDIF): 951 result = EXT_SPDIF_TYPE; 952 break; 953 case (CPLD_EXT_WORDCLOCK_1FS): 954 result = EXT_WORDCLOCK_1FS_TYPE; 955 break; 956 case (CPLD_EXT_WORDCLOCK_256FS): 957 result = EXT_WORDCLOCK_256FS_TYPE; 958 break; 959 default: 960 /* undefined combination of external clock setup */ 961 snd_BUG(); 962 result = 0; 963 } 964 } 965 return result; 966} 967 968/* Called when ak4113 detects change in the input SPDIF stream */ 969static void qtet_ak4113_change(struct ak4113 *ak4113, unsigned char c0, 970 unsigned char c1) 971{ 972 struct snd_ice1712 *ice = ak4113->change_callback_private; 973 int rate; 974 if ((qtet_get_spdif_master_type(ice) == EXT_SPDIF_TYPE) && 975 c1) { 976 /* only for SPDIF master mode, rate was changed */ 977 rate = snd_ak4113_external_rate(ak4113); 978 /* printk(KERN_DEBUG "ak4113 - input rate changed to %d\n", 979 rate); */ 980 qtet_akm_set_rate_val(ice->akm, rate); 981 } 982} 983 984/* 985 * If clock slaved to SPDIF-IN, setting runtime rate 986 * to the detected external rate 987 */ 988static void qtet_spdif_in_open(struct snd_ice1712 *ice, 989 struct snd_pcm_substream *substream) 990{ 991 struct qtet_spec *spec = ice->spec; 992 struct snd_pcm_runtime *runtime = substream->runtime; 993 int rate; 994 995 if (qtet_get_spdif_master_type(ice) != EXT_SPDIF_TYPE) 996 /* not external SPDIF, no rate limitation */ 997 return; 998 /* only external SPDIF can detect incoming sample rate */ 999 rate = snd_ak4113_external_rate(spec->ak4113); 1000 if (rate >= runtime->hw.rate_min && rate <= runtime->hw.rate_max) { 1001 runtime->hw.rate_min = rate; 1002 runtime->hw.rate_max = rate; 1003 } 1004} 1005 1006/* 1007 * initialize the chip 1008 */ 1009static int __devinit qtet_init(struct snd_ice1712 *ice) 1010{ 1011 static const unsigned char ak4113_init_vals[] = { 1012 /* AK4113_REG_PWRDN */ AK4113_RST | AK4113_PWN | 1013 AK4113_OCKS0 | AK4113_OCKS1, 1014 /* AK4113_REQ_FORMAT */ AK4113_DIF_I24I2S | AK4113_VTX | 1015 AK4113_DEM_OFF | AK4113_DEAU, 1016 /* AK4113_REG_IO0 */ AK4113_OPS2 | AK4113_TXE | 1017 AK4113_XTL_24_576M, 1018 /* AK4113_REG_IO1 */ AK4113_EFH_1024LRCLK | AK4113_IPS(0), 1019 /* AK4113_REG_INT0_MASK */ 0, 1020 /* AK4113_REG_INT1_MASK */ 0, 1021 /* AK4113_REG_DATDTS */ 0, 1022 }; 1023 int err; 1024 struct qtet_spec *spec; 1025 struct snd_akm4xxx *ak; 1026 unsigned char val; 1027 1028 /* switching ice1724 to external clock - supplied by ext. circuits */ 1029 val = inb(ICEMT1724(ice, RATE)); 1030 outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE)); 1031 1032 spec = kzalloc(sizeof(*spec), GFP_KERNEL); 1033 if (!spec) 1034 return -ENOMEM; 1035 /* qtet is clocked by Xilinx array */ 1036 ice->hw_rates = &qtet_rates_info; 1037 ice->is_spdif_master = qtet_is_spdif_master; 1038 ice->get_rate = qtet_get_rate; 1039 ice->set_rate = qtet_set_rate; 1040 ice->set_mclk = qtet_set_mclk; 1041 ice->set_spdif_clock = qtet_set_spdif_clock; 1042 ice->get_spdif_master_type = qtet_get_spdif_master_type; 1043 ice->ext_clock_names = ext_clock_names; 1044 ice->ext_clock_count = ARRAY_SIZE(ext_clock_names); 1045 /* since Qtet can detect correct SPDIF-in rate, all streams can be 1046 * limited to this specific rate */ 1047 ice->spdif.ops.open = ice->pro_open = qtet_spdif_in_open; 1048 ice->spec = spec; 1049 1050 /* Mute Off */ 1051 /* SCR Initialize*/ 1052 /* keep codec power down first */ 1053 set_scr(ice, SCR_PHP); 1054 udelay(1); 1055 /* codec power up */ 1056 set_scr(ice, SCR_PHP | SCR_CODEC_PDN); 1057 1058 /* MCR Initialize */ 1059 set_mcr(ice, 0); 1060 1061 /* CPLD Initialize */ 1062 set_cpld(ice, 0); 1063 1064 1065 ice->num_total_dacs = 2; 1066 ice->num_total_adcs = 2; 1067 1068 ice->akm = kcalloc(2, sizeof(struct snd_akm4xxx), GFP_KERNEL); 1069 ak = ice->akm; 1070 if (!ak) 1071 return -ENOMEM; 1072 /* only one codec with two chips */ 1073 ice->akm_codecs = 1; 1074 err = snd_ice1712_akm4xxx_init(ak, &akm_qtet_dac, NULL, ice); 1075 if (err < 0) 1076 return err; 1077 err = snd_ak4113_create(ice->card, 1078 qtet_ak4113_read, 1079 qtet_ak4113_write, 1080 ak4113_init_vals, 1081 ice, &spec->ak4113); 1082 if (err < 0) 1083 return err; 1084 /* callback for codecs rate setting */ 1085 spec->ak4113->change_callback = qtet_ak4113_change; 1086 spec->ak4113->change_callback_private = ice; 1087 /* AK41143 in Quartet can detect external rate correctly 1088 * (i.e. check_flags = 0) */ 1089 spec->ak4113->check_flags = 0; 1090 1091 proc_init(ice); 1092 1093 qtet_set_rate(ice, 44100); 1094 return 0; 1095} 1096 1097static unsigned char qtet_eeprom[] __devinitdata = { 1098 [ICE_EEP2_SYSCONF] = 0x28, /* clock 256(24MHz), mpu401, 1xADC, 1099 1xDACs, SPDIF in */ 1100 [ICE_EEP2_ACLINK] = 0x80, /* I2S */ 1101 [ICE_EEP2_I2S] = 0x78, /* 96k, 24bit, 192k */ 1102 [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, in, out-ext */ 1103 [ICE_EEP2_GPIO_DIR] = 0x00, /* 0-7 inputs, switched to output 1104 only during output operations */ 1105 [ICE_EEP2_GPIO_DIR1] = 0xff, /* 8-15 outputs */ 1106 [ICE_EEP2_GPIO_DIR2] = 0x00, 1107 [ICE_EEP2_GPIO_MASK] = 0xff, /* changed only for OUT operations */ 1108 [ICE_EEP2_GPIO_MASK1] = 0x00, 1109 [ICE_EEP2_GPIO_MASK2] = 0xff, 1110 1111 [ICE_EEP2_GPIO_STATE] = 0x00, /* inputs */ 1112 [ICE_EEP2_GPIO_STATE1] = 0x7d, /* all 1, but GPIO_CPLD_RW 1113 and GPIO15 always zero */ 1114 [ICE_EEP2_GPIO_STATE2] = 0x00, /* inputs */ 1115}; 1116 1117/* entry point */ 1118struct snd_ice1712_card_info snd_vt1724_qtet_cards[] __devinitdata = { 1119 { 1120 .subvendor = VT1724_SUBDEVICE_QTET, 1121 .name = "Infrasonic Quartet", 1122 .model = "quartet", 1123 .chip_init = qtet_init, 1124 .build_controls = qtet_add_controls, 1125 .eeprom_size = sizeof(qtet_eeprom), 1126 .eeprom_data = qtet_eeprom, 1127 }, 1128 { } /* terminator */ 1129}; 1130