1# ========================================================================== 2# Building 3# ========================================================================== 4 5src := $(obj) 6 7PHONY := __build 8__build: 9 10# Init all relevant variables used in kbuild files so 11# 1) they have correct type 12# 2) they do not inherit any value from the environment 13obj-y := 14obj-m := 15lib-y := 16lib-m := 17always := 18targets := 19subdir-y := 20subdir-m := 21EXTRA_AFLAGS := 22EXTRA_CFLAGS := 23EXTRA_CPPFLAGS := 24EXTRA_LDFLAGS := 25asflags-y := 26ccflags-y := 27cppflags-y := 28ldflags-y := 29 30subdir-asflags-y := 31subdir-ccflags-y := 32 33# Read auto.conf if it exists, otherwise ignore 34-include include/config/auto.conf 35 36include scripts/Kbuild.include 37 38# For backward compatibility check that these variables do not change 39save-cflags := $(CFLAGS) 40 41# The filename Kbuild has precedence over Makefile 42kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) 43kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile) 44include $(kbuild-file) 45 46# If the save-* variables changed error out 47ifeq ($(KBUILD_NOPEDANTIC),) 48 ifneq ("$(save-cflags)","$(CFLAGS)") 49 $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use EXTRA_CFLAGS) 50 endif 51endif 52include scripts/Makefile.lib 53 54ifdef host-progs 55ifneq ($(hostprogs-y),$(host-progs)) 56$(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!) 57hostprogs-y += $(host-progs) 58endif 59endif 60 61# Do not include host rules unless needed 62ifneq ($(hostprogs-y)$(hostprogs-m),) 63include scripts/Makefile.host 64endif 65 66ifneq ($(KBUILD_SRC),) 67# Create output directory if not already present 68_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj)) 69 70# Create directories for object files if directory does not exist 71# Needed when obj-y := dir/file.o syntax is used 72_dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d))) 73endif 74 75ifndef obj 76$(warning kbuild: Makefile.build is included improperly) 77endif 78 79# =========================================================================== 80 81ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),) 82lib-target := $(obj)/lib.a 83endif 84 85ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(subdir-m) $(lib-target)),) 86builtin-target := $(obj)/built-in.o 87endif 88 89modorder-target := $(obj)/modules.order 90 91# We keep a list of all modules in $(MODVERDIR) 92 93__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \ 94 $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \ 95 $(subdir-ym) $(always) 96 @: 97 98# Linus' kernel sanity checking tool 99ifneq ($(KBUILD_CHECKSRC),0) 100 ifeq ($(KBUILD_CHECKSRC),2) 101 quiet_cmd_force_checksrc = CHECK $< 102 cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ; 103 else 104 quiet_cmd_checksrc = CHECK $< 105 cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ; 106 endif 107endif 108 109# Do section mismatch analysis for each module/built-in.o 110ifdef CONFIG_DEBUG_SECTION_MISMATCH 111 cmd_secanalysis = ; scripts/mod/modpost $@ 112endif 113 114# Compile C sources (.c) 115# --------------------------------------------------------------------------- 116 117# Default is built-in, unless we know otherwise 118modkern_cflags = \ 119 $(if $(part-of-module), \ 120 $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \ 121 $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL)) 122quiet_modtag := $(empty) $(empty) 123 124$(real-objs-m) : part-of-module := y 125$(real-objs-m:.o=.i) : part-of-module := y 126$(real-objs-m:.o=.s) : part-of-module := y 127$(real-objs-m:.o=.lst): part-of-module := y 128 129$(real-objs-m) : quiet_modtag := [M] 130$(real-objs-m:.o=.i) : quiet_modtag := [M] 131$(real-objs-m:.o=.s) : quiet_modtag := [M] 132$(real-objs-m:.o=.lst): quiet_modtag := [M] 133 134$(obj-m) : quiet_modtag := [M] 135 136# Default for not multi-part modules 137modname = $(basetarget) 138 139$(multi-objs-m) : modname = $(modname-multi) 140$(multi-objs-m:.o=.i) : modname = $(modname-multi) 141$(multi-objs-m:.o=.s) : modname = $(modname-multi) 142$(multi-objs-m:.o=.lst) : modname = $(modname-multi) 143$(multi-objs-y) : modname = $(modname-multi) 144$(multi-objs-y:.o=.i) : modname = $(modname-multi) 145$(multi-objs-y:.o=.s) : modname = $(modname-multi) 146$(multi-objs-y:.o=.lst) : modname = $(modname-multi) 147 148quiet_cmd_cc_s_c = CC $(quiet_modtag) $@ 149cmd_cc_s_c = $(CC) $(c_flags) -fverbose-asm -S -o $@ $< 150 151$(obj)/%.s: $(src)/%.c FORCE 152 $(call if_changed_dep,cc_s_c) 153 154quiet_cmd_cc_i_c = CPP $(quiet_modtag) $@ 155cmd_cc_i_c = $(CPP) $(c_flags) -o $@ $< 156 157$(obj)/%.i: $(src)/%.c FORCE 158 $(call if_changed_dep,cc_i_c) 159 160cmd_gensymtypes = \ 161 $(CPP) -D__GENKSYMS__ $(c_flags) $< | \ 162 $(GENKSYMS) $(if $(1), -T $(2)) -a $(ARCH) \ 163 $(if $(KBUILD_PRESERVE),-p) \ 164 -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null)) 165 166quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@ 167cmd_cc_symtypes_c = \ 168 set -e; \ 169 $(call cmd_gensymtypes,true,$@) >/dev/null; \ 170 test -s $@ || rm -f $@ 171 172$(obj)/%.symtypes : $(src)/%.c FORCE 173 $(call cmd,cc_symtypes_c) 174 175# C (.c) files 176# The C file is compiled and updated dependency information is generated. 177# (See cmd_cc_o_c + relevant part of rule_cc_o_c) 178 179quiet_cmd_cc_o_c = CC $(quiet_modtag) $@ 180 181ifndef CONFIG_MODVERSIONS 182cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< 183 184else 185# When module versioning is enabled the following steps are executed: 186# o compile a .tmp_<file>.o from <file>.c 187# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does 188# not export symbols, we just rename .tmp_<file>.o to <file>.o and 189# are done. 190# o otherwise, we calculate symbol versions using the good old 191# genksyms on the preprocessed source and postprocess them in a way 192# that they are usable as a linker script 193# o generate <file>.o from .tmp_<file>.o using the linker to 194# replace the unresolved symbols __crc_exported_symbol with 195# the actual value of the checksum generated by genksyms 196 197cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $< 198cmd_modversions = \ 199 if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \ 200 $(call cmd_gensymtypes,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \ 201 > $(@D)/.tmp_$(@F:.o=.ver); \ 202 \ 203 $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \ 204 -T $(@D)/.tmp_$(@F:.o=.ver); \ 205 rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \ 206 else \ 207 mv -f $(@D)/.tmp_$(@F) $@; \ 208 fi; 209endif 210 211ifdef CONFIG_FTRACE_MCOUNT_RECORD 212cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ 213 "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \ 214 "$(if $(CONFIG_64BIT),64,32)" \ 215 "$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" "$(MV)" \ 216 "$(if $(part-of-module),1,0)" "$(@)"; 217endif 218 219define rule_cc_o_c 220 $(call echo-cmd,checksrc) $(cmd_checksrc) \ 221 $(call echo-cmd,cc_o_c) $(cmd_cc_o_c); \ 222 $(cmd_modversions) \ 223 $(call echo-cmd,record_mcount) \ 224 $(cmd_record_mcount) \ 225 scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \ 226 $(dot-target).tmp; \ 227 rm -f $(depfile); \ 228 mv -f $(dot-target).tmp $(dot-target).cmd 229endef 230 231# Built-in and composite module parts 232$(obj)/%.o: $(src)/%.c FORCE 233 $(call cmd,force_checksrc) 234 $(call if_changed_rule,cc_o_c) 235 236# Single-part modules are special since we need to mark them in $(MODVERDIR) 237 238$(single-used-m): $(obj)/%.o: $(src)/%.c FORCE 239 $(call cmd,force_checksrc) 240 $(call if_changed_rule,cc_o_c) 241 @{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod) 242 243quiet_cmd_cc_lst_c = MKLST $@ 244 cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \ 245 $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \ 246 System.map $(OBJDUMP) > $@ 247 248$(obj)/%.lst: $(src)/%.c FORCE 249 $(call if_changed_dep,cc_lst_c) 250 251# Compile assembler sources (.S) 252# --------------------------------------------------------------------------- 253 254modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL) 255 256$(real-objs-m) : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) 257$(real-objs-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) 258 259quiet_cmd_as_s_S = CPP $(quiet_modtag) $@ 260cmd_as_s_S = $(CPP) $(a_flags) -o $@ $< 261 262$(obj)/%.s: $(src)/%.S FORCE 263 $(call if_changed_dep,as_s_S) 264 265quiet_cmd_as_o_S = AS $(quiet_modtag) $@ 266cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< 267 268$(obj)/%.o: $(src)/%.S FORCE 269 $(call if_changed_dep,as_o_S) 270 271targets += $(real-objs-y) $(real-objs-m) $(lib-y) 272targets += $(extra-y) $(MAKECMDGOALS) $(always) 273 274# Linker scripts preprocessor (.lds.S -> .lds) 275# --------------------------------------------------------------------------- 276quiet_cmd_cpp_lds_S = LDS $@ 277 cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \ 278 -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $< 279 280$(obj)/%.lds: $(src)/%.lds.S FORCE 281 $(call if_changed_dep,cpp_lds_S) 282 283# Build the compiled-in targets 284# --------------------------------------------------------------------------- 285 286# To build objects in subdirs, we need to descend into the directories 287$(sort $(subdir-obj-y)): $(subdir-ym) ; 288 289# 290# Rule to compile a set of .o files into one .o file 291# 292ifdef builtin-target 293quiet_cmd_link_o_target = LD $@ 294# If the list of objects to link is empty, just create an empty built-in.o 295cmd_link_o_target = $(if $(strip $(obj-y)),\ 296 $(LD) $(ld_flags) -r -o $@ $(filter $(obj-y), $^) \ 297 $(cmd_secanalysis),\ 298 rm -f $@; $(AR) rcs $@) 299 300$(builtin-target): $(obj-y) FORCE 301 $(call if_changed,link_o_target) 302 303targets += $(builtin-target) 304endif # builtin-target 305 306# 307# Rule to create modules.order file 308# 309# Create commands to either record .ko file or cat modules.order from 310# a subdirectory 311modorder-cmds = \ 312 $(foreach m, $(modorder), \ 313 $(if $(filter %/modules.order, $m), \ 314 cat $m;, echo kernel/$m;)) 315 316$(modorder-target): $(subdir-ym) FORCE 317 $(Q)(cat /dev/null; $(modorder-cmds)) > $@ 318 319# 320# Rule to compile a set of .o files into one .a file 321# 322ifdef lib-target 323quiet_cmd_link_l_target = AR $@ 324cmd_link_l_target = rm -f $@; $(AR) rcs $@ $(lib-y) 325 326$(lib-target): $(lib-y) FORCE 327 $(call if_changed,link_l_target) 328 329targets += $(lib-target) 330endif 331 332# 333# Rule to link composite objects 334# 335# Composite objects are specified in kbuild makefile as follows: 336# <composite-object>-objs := <list of .o files> 337# or 338# <composite-object>-y := <list of .o files> 339link_multi_deps = \ 340$(filter $(addprefix $(obj)/, \ 341$($(subst $(obj)/,,$(@:.o=-objs))) \ 342$($(subst $(obj)/,,$(@:.o=-y)))), $^) 343 344quiet_cmd_link_multi-y = LD $@ 345cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis) 346 347quiet_cmd_link_multi-m = LD [M] $@ 348cmd_link_multi-m = $(cmd_link_multi-y) 349 350# We would rather have a list of rules like 351# foo.o: $(foo-objs) 352# but that's not so easy, so we rather make all composite objects depend 353# on the set of all their parts 354$(multi-used-y) : %.o: $(multi-objs-y) FORCE 355 $(call if_changed,link_multi-y) 356 357$(multi-used-m) : %.o: $(multi-objs-m) FORCE 358 $(call if_changed,link_multi-m) 359 @{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod) 360 361targets += $(multi-used-y) $(multi-used-m) 362 363 364# Descending 365# --------------------------------------------------------------------------- 366 367PHONY += $(subdir-ym) 368$(subdir-ym): 369 $(Q)$(MAKE) $(build)=$@ 370 371# Add FORCE to the prequisites of a target to force it to be always rebuilt. 372# --------------------------------------------------------------------------- 373 374PHONY += FORCE 375 376FORCE: 377 378# Read all saved command lines and dependencies for the $(targets) we 379# may be building above, using $(if_changed{,_dep}). As an 380# optimization, we don't need to read them if the target does not 381# exist, we will rebuild anyway in that case. 382 383targets := $(wildcard $(sort $(targets))) 384cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) 385 386ifneq ($(cmd_files),) 387 include $(cmd_files) 388endif 389 390 391# Declare the contents of the .PHONY variable as phony. We keep that 392# information in a variable se we can use it in if_changed and friends. 393 394.PHONY: $(PHONY) 395