1/* 2 * Copyright (c) 2000-2010 LSI Corporation. 3 * 4 * 5 * Name: mpi2_init.h 6 * Title: MPI SCSI initiator mode messages and structures 7 * Creation Date: June 23, 2006 8 * 9 * mpi2_init.h Version: 02.00.09 10 * 11 * Version History 12 * --------------- 13 * 14 * Date Version Description 15 * -------- -------- ------------------------------------------------------ 16 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 17 * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t. 18 * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines. 19 * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention. 20 * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY. 21 * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. 22 * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO 23 * Control field Task Attribute flags. 24 * Moved LUN field defines to mpi2.h becasue they are 25 * common to many structures. 26 * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to 27 * Query Asynchronous Event. 28 * Defined two new bits in the SlotStatus field of the SCSI 29 * Enclosure Processor Request and Reply. 30 * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for 31 * both SCSI IO Error Reply and SCSI Task Management Reply. 32 * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY. 33 * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define. 34 * 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it. 35 * -------------------------------------------------------------------------- 36 */ 37 38#ifndef MPI2_INIT_H 39#define MPI2_INIT_H 40 41/***************************************************************************** 42* 43* SCSI Initiator Messages 44* 45*****************************************************************************/ 46 47/**************************************************************************** 48* SCSI IO messages and associated structures 49****************************************************************************/ 50 51typedef struct 52{ 53 U8 CDB[20]; /* 0x00 */ 54 U32 PrimaryReferenceTag; /* 0x14 */ 55 U16 PrimaryApplicationTag; /* 0x18 */ 56 U16 PrimaryApplicationTagMask; /* 0x1A */ 57 U32 TransferLength; /* 0x1C */ 58} MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32, 59 Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t; 60 61typedef union 62{ 63 U8 CDB32[32]; 64 MPI2_SCSI_IO_CDB_EEDP32 EEDP32; 65 MPI2_SGE_SIMPLE_UNION SGE; 66} MPI2_SCSI_IO_CDB_UNION, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_UNION, 67 Mpi2ScsiIoCdb_t, MPI2_POINTER pMpi2ScsiIoCdb_t; 68 69/* SCSI IO Request Message */ 70typedef struct _MPI2_SCSI_IO_REQUEST 71{ 72 U16 DevHandle; /* 0x00 */ 73 U8 ChainOffset; /* 0x02 */ 74 U8 Function; /* 0x03 */ 75 U16 Reserved1; /* 0x04 */ 76 U8 Reserved2; /* 0x06 */ 77 U8 MsgFlags; /* 0x07 */ 78 U8 VP_ID; /* 0x08 */ 79 U8 VF_ID; /* 0x09 */ 80 U16 Reserved3; /* 0x0A */ 81 U32 SenseBufferLowAddress; /* 0x0C */ 82 U16 SGLFlags; /* 0x10 */ 83 U8 SenseBufferLength; /* 0x12 */ 84 U8 Reserved4; /* 0x13 */ 85 U8 SGLOffset0; /* 0x14 */ 86 U8 SGLOffset1; /* 0x15 */ 87 U8 SGLOffset2; /* 0x16 */ 88 U8 SGLOffset3; /* 0x17 */ 89 U32 SkipCount; /* 0x18 */ 90 U32 DataLength; /* 0x1C */ 91 U32 BidirectionalDataLength; /* 0x20 */ 92 U16 IoFlags; /* 0x24 */ 93 U16 EEDPFlags; /* 0x26 */ 94 U32 EEDPBlockSize; /* 0x28 */ 95 U32 SecondaryReferenceTag; /* 0x2C */ 96 U16 SecondaryApplicationTag; /* 0x30 */ 97 U16 ApplicationTagTranslationMask; /* 0x32 */ 98 U8 LUN[8]; /* 0x34 */ 99 U32 Control; /* 0x3C */ 100 MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */ 101 MPI2_SGE_IO_UNION SGL; /* 0x60 */ 102} MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST, 103 Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t; 104 105/* SCSI IO MsgFlags bits */ 106 107/* MsgFlags for SenseBufferAddressSpace */ 108#define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C) 109#define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00) 110#define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04) 111#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08) 112#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C) 113 114/* SCSI IO SGLFlags bits */ 115 116/* base values for Data Location Address Space */ 117#define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C) 118#define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00) 119#define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04) 120#define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08) 121#define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C) 122 123/* base values for Type */ 124#define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03) 125#define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00) 126#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01) 127#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02) 128 129/* shift values for each sub-field */ 130#define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12) 131#define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8) 132#define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4) 133#define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0) 134 135/* SCSI IO IoFlags bits */ 136 137/* Large CDB Address Space */ 138#define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000) 139#define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000) 140#define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000) 141#define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000) 142#define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000) 143 144#define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000) 145#define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800) 146#define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400) 147#define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200) 148#define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF) 149 150/* SCSI IO EEDPFlags bits */ 151 152#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000) 153#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000) 154#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000) 155#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000) 156 157#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400) 158#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200) 159#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100) 160 161#define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008) 162 163#define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007) 164#define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000) 165#define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001) 166#define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002) 167#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003) 168#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004) 169#define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006) 170#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007) 171 172/* SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */ 173 174/* SCSI IO Control bits */ 175#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000) 176#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26) 177 178#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000) 179#define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000) 180#define MPI2_SCSIIO_CONTROL_WRITE (0x01000000) 181#define MPI2_SCSIIO_CONTROL_READ (0x02000000) 182#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000) 183 184#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800) 185#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11) 186 187#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700) 188#define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000) 189#define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100) 190#define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200) 191#define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400) 192 193#define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0) 194#define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000) 195#define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040) 196#define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080) 197 198 199/* SCSI IO Error Reply Message */ 200typedef struct _MPI2_SCSI_IO_REPLY 201{ 202 U16 DevHandle; /* 0x00 */ 203 U8 MsgLength; /* 0x02 */ 204 U8 Function; /* 0x03 */ 205 U16 Reserved1; /* 0x04 */ 206 U8 Reserved2; /* 0x06 */ 207 U8 MsgFlags; /* 0x07 */ 208 U8 VP_ID; /* 0x08 */ 209 U8 VF_ID; /* 0x09 */ 210 U16 Reserved3; /* 0x0A */ 211 U8 SCSIStatus; /* 0x0C */ 212 U8 SCSIState; /* 0x0D */ 213 U16 IOCStatus; /* 0x0E */ 214 U32 IOCLogInfo; /* 0x10 */ 215 U32 TransferCount; /* 0x14 */ 216 U32 SenseCount; /* 0x18 */ 217 U32 ResponseInfo; /* 0x1C */ 218 U16 TaskTag; /* 0x20 */ 219 U16 Reserved4; /* 0x22 */ 220 U32 BidirectionalTransferCount; /* 0x24 */ 221 U32 Reserved5; /* 0x28 */ 222 U32 Reserved6; /* 0x2C */ 223} MPI2_SCSI_IO_REPLY, MPI2_POINTER PTR_MPI2_SCSI_IO_REPLY, 224 Mpi2SCSIIOReply_t, MPI2_POINTER pMpi2SCSIIOReply_t; 225 226/* SCSI IO Reply SCSIStatus values (SAM-4 status codes) */ 227 228#define MPI2_SCSI_STATUS_GOOD (0x00) 229#define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02) 230#define MPI2_SCSI_STATUS_CONDITION_MET (0x04) 231#define MPI2_SCSI_STATUS_BUSY (0x08) 232#define MPI2_SCSI_STATUS_INTERMEDIATE (0x10) 233#define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14) 234#define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18) 235#define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /* obsolete */ 236#define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28) 237#define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30) 238#define MPI2_SCSI_STATUS_TASK_ABORTED (0x40) 239 240/* SCSI IO Reply SCSIState flags */ 241 242#define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10) 243#define MPI2_SCSI_STATE_TERMINATED (0x08) 244#define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04) 245#define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02) 246#define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01) 247 248/* masks and shifts for the ResponseInfo field */ 249 250#define MPI2_SCSI_RI_MASK_REASONCODE (0x000000FF) 251#define MPI2_SCSI_RI_SHIFT_REASONCODE (0) 252 253#define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF) 254 255 256/**************************************************************************** 257* SCSI Task Management messages 258****************************************************************************/ 259 260/* SCSI Task Management Request Message */ 261typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST 262{ 263 U16 DevHandle; /* 0x00 */ 264 U8 ChainOffset; /* 0x02 */ 265 U8 Function; /* 0x03 */ 266 U8 Reserved1; /* 0x04 */ 267 U8 TaskType; /* 0x05 */ 268 U8 Reserved2; /* 0x06 */ 269 U8 MsgFlags; /* 0x07 */ 270 U8 VP_ID; /* 0x08 */ 271 U8 VF_ID; /* 0x09 */ 272 U16 Reserved3; /* 0x0A */ 273 U8 LUN[8]; /* 0x0C */ 274 U32 Reserved4[7]; /* 0x14 */ 275 U16 TaskMID; /* 0x30 */ 276 U16 Reserved5; /* 0x32 */ 277} MPI2_SCSI_TASK_MANAGE_REQUEST, 278 MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REQUEST, 279 Mpi2SCSITaskManagementRequest_t, 280 MPI2_POINTER pMpi2SCSITaskManagementRequest_t; 281 282/* TaskType values */ 283 284#define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01) 285#define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02) 286#define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03) 287#define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) 288#define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) 289#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) 290#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08) 291#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09) 292#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A) 293 294/* obsolete TaskType name */ 295#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION \ 296 (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT) 297 298/* MsgFlags bits */ 299 300#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18) 301#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00) 302#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08) 303#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10) 304 305#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01) 306 307 308 309/* SCSI Task Management Reply Message */ 310typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY 311{ 312 U16 DevHandle; /* 0x00 */ 313 U8 MsgLength; /* 0x02 */ 314 U8 Function; /* 0x03 */ 315 U8 ResponseCode; /* 0x04 */ 316 U8 TaskType; /* 0x05 */ 317 U8 Reserved1; /* 0x06 */ 318 U8 MsgFlags; /* 0x07 */ 319 U8 VP_ID; /* 0x08 */ 320 U8 VF_ID; /* 0x09 */ 321 U16 Reserved2; /* 0x0A */ 322 U16 Reserved3; /* 0x0C */ 323 U16 IOCStatus; /* 0x0E */ 324 U32 IOCLogInfo; /* 0x10 */ 325 U32 TerminationCount; /* 0x14 */ 326 U32 ResponseInfo; /* 0x18 */ 327} MPI2_SCSI_TASK_MANAGE_REPLY, 328 MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REPLY, 329 Mpi2SCSITaskManagementReply_t, MPI2_POINTER pMpi2SCSIManagementReply_t; 330 331/* ResponseCode values */ 332 333#define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00) 334#define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02) 335#define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04) 336#define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05) 337#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08) 338#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09) 339#define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG (0x0A) 340#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80) 341 342/* masks and shifts for the ResponseInfo field */ 343 344#define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE (0x000000FF) 345#define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE (0) 346#define MPI2_SCSITASKMGMT_RI_MASK_ARI2 (0x0000FF00) 347#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2 (8) 348#define MPI2_SCSITASKMGMT_RI_MASK_ARI1 (0x00FF0000) 349#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1 (16) 350#define MPI2_SCSITASKMGMT_RI_MASK_ARI0 (0xFF000000) 351#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0 (24) 352 353 354/**************************************************************************** 355* SCSI Enclosure Processor messages 356****************************************************************************/ 357 358/* SCSI Enclosure Processor Request Message */ 359typedef struct _MPI2_SEP_REQUEST 360{ 361 U16 DevHandle; /* 0x00 */ 362 U8 ChainOffset; /* 0x02 */ 363 U8 Function; /* 0x03 */ 364 U8 Action; /* 0x04 */ 365 U8 Flags; /* 0x05 */ 366 U8 Reserved1; /* 0x06 */ 367 U8 MsgFlags; /* 0x07 */ 368 U8 VP_ID; /* 0x08 */ 369 U8 VF_ID; /* 0x09 */ 370 U16 Reserved2; /* 0x0A */ 371 U32 SlotStatus; /* 0x0C */ 372 U32 Reserved3; /* 0x10 */ 373 U32 Reserved4; /* 0x14 */ 374 U32 Reserved5; /* 0x18 */ 375 U16 Slot; /* 0x1C */ 376 U16 EnclosureHandle; /* 0x1E */ 377} MPI2_SEP_REQUEST, MPI2_POINTER PTR_MPI2_SEP_REQUEST, 378 Mpi2SepRequest_t, MPI2_POINTER pMpi2SepRequest_t; 379 380/* Action defines */ 381#define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00) 382#define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01) 383 384/* Flags defines */ 385#define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00) 386#define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01) 387 388/* SlotStatus defines */ 389#define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000) 390#define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) 391#define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200) 392#define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100) 393#define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080) 394#define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040) 395#define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) 396#define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) 397#define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004) 398#define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002) 399#define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001) 400 401 402/* SCSI Enclosure Processor Reply Message */ 403typedef struct _MPI2_SEP_REPLY 404{ 405 U16 DevHandle; /* 0x00 */ 406 U8 MsgLength; /* 0x02 */ 407 U8 Function; /* 0x03 */ 408 U8 Action; /* 0x04 */ 409 U8 Flags; /* 0x05 */ 410 U8 Reserved1; /* 0x06 */ 411 U8 MsgFlags; /* 0x07 */ 412 U8 VP_ID; /* 0x08 */ 413 U8 VF_ID; /* 0x09 */ 414 U16 Reserved2; /* 0x0A */ 415 U16 Reserved3; /* 0x0C */ 416 U16 IOCStatus; /* 0x0E */ 417 U32 IOCLogInfo; /* 0x10 */ 418 U32 SlotStatus; /* 0x14 */ 419 U32 Reserved4; /* 0x18 */ 420 U16 Slot; /* 0x1C */ 421 U16 EnclosureHandle; /* 0x1E */ 422} MPI2_SEP_REPLY, MPI2_POINTER PTR_MPI2_SEP_REPLY, 423 Mpi2SepReply_t, MPI2_POINTER pMpi2SepReply_t; 424 425/* SlotStatus defines */ 426#define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000) 427#define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) 428#define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200) 429#define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100) 430#define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080) 431#define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040) 432#define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) 433#define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) 434#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004) 435#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002) 436#define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001) 437 438 439#endif 440