• Home
  • History
  • Annotate
  • Line#
  • Navigate
  • Raw
  • Download
  • only in /netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/net/wireless/b43/
1#ifndef LINUX_B43_PHY_A_H_
2#define LINUX_B43_PHY_A_H_
3
4#include "phy_common.h"
5
6
7/* OFDM (A) PHY Registers */
8#define B43_PHY_VERSION_OFDM		B43_PHY_OFDM(0x00)	/* Versioning register for A-PHY */
9#define B43_PHY_BBANDCFG		B43_PHY_OFDM(0x01)	/* Baseband config */
10#define  B43_PHY_BBANDCFG_RXANT		0x180	/* RX Antenna selection */
11#define  B43_PHY_BBANDCFG_RXANT_SHIFT	7
12#define B43_PHY_PWRDOWN			B43_PHY_OFDM(0x03)	/* Powerdown */
13#define B43_PHY_CRSTHRES1_R1		B43_PHY_OFDM(0x06)	/* CRS Threshold 1 (phy.rev 1 only) */
14#define B43_PHY_LNAHPFCTL		B43_PHY_OFDM(0x1C)	/* LNA/HPF control */
15#define B43_PHY_LPFGAINCTL		B43_PHY_OFDM(0x20)	/* LPF Gain control */
16#define B43_PHY_ADIVRELATED		B43_PHY_OFDM(0x27)
17#define B43_PHY_CRS0			B43_PHY_OFDM(0x29)
18#define  B43_PHY_CRS0_EN		0x4000
19#define B43_PHY_PEAK_COUNT		B43_PHY_OFDM(0x30)
20#define B43_PHY_ANTDWELL		B43_PHY_OFDM(0x2B)	/* Antenna dwell */
21#define  B43_PHY_ANTDWELL_AUTODIV1	0x0100	/* Automatic RX diversity start antenna */
22#define B43_PHY_ENCORE			B43_PHY_OFDM(0x49)	/* "Encore" (RangeMax / BroadRange) */
23#define  B43_PHY_ENCORE_EN		0x0200	/* Encore enable */
24#define B43_PHY_LMS			B43_PHY_OFDM(0x55)
25#define B43_PHY_OFDM61			B43_PHY_OFDM(0x61)
26#define  B43_PHY_OFDM61_10		0x0010
27#define B43_PHY_IQBAL			B43_PHY_OFDM(0x69)	/* I/Q balance */
28#define B43_PHY_BBTXDC_BIAS		B43_PHY_OFDM(0x6B)	/* Baseband TX DC bias */
29#define B43_PHY_OTABLECTL		B43_PHY_OFDM(0x72)	/* OFDM table control (see below) */
30#define  B43_PHY_OTABLEOFF		0x03FF	/* OFDM table offset (see below) */
31#define  B43_PHY_OTABLENR		0xFC00	/* OFDM table number (see below) */
32#define  B43_PHY_OTABLENR_SHIFT		10
33#define B43_PHY_OTABLEI			B43_PHY_OFDM(0x73)	/* OFDM table data I */
34#define B43_PHY_OTABLEQ			B43_PHY_OFDM(0x74)	/* OFDM table data Q */
35#define B43_PHY_HPWR_TSSICTL		B43_PHY_OFDM(0x78)	/* Hardware power TSSI control */
36#define B43_PHY_ADCCTL			B43_PHY_OFDM(0x7A)	/* ADC control */
37#define B43_PHY_IDLE_TSSI		B43_PHY_OFDM(0x7B)
38#define B43_PHY_A_TEMP_SENSE		B43_PHY_OFDM(0x7C)	/* A PHY temperature sense */
39#define B43_PHY_NRSSITHRES		B43_PHY_OFDM(0x8A)	/* NRSSI threshold */
40#define B43_PHY_ANTWRSETT		B43_PHY_OFDM(0x8C)	/* Antenna WR settle */
41#define  B43_PHY_ANTWRSETT_ARXDIV	0x2000	/* Automatic RX diversity enabled */
42#define B43_PHY_CLIPPWRDOWNT		B43_PHY_OFDM(0x93)	/* Clip powerdown threshold */
43#define B43_PHY_OFDM9B			B43_PHY_OFDM(0x9B)
44#define B43_PHY_N1P1GAIN		B43_PHY_OFDM(0xA0)
45#define B43_PHY_P1P2GAIN		B43_PHY_OFDM(0xA1)
46#define B43_PHY_N1N2GAIN		B43_PHY_OFDM(0xA2)
47#define B43_PHY_CLIPTHRES		B43_PHY_OFDM(0xA3)
48#define B43_PHY_CLIPN1P2THRES		B43_PHY_OFDM(0xA4)
49#define B43_PHY_CCKSHIFTBITS_WA		B43_PHY_OFDM(0xA5)
50#define B43_PHY_CCKSHIFTBITS		B43_PHY_OFDM(0xA7)
51#define B43_PHY_DIVSRCHIDX		B43_PHY_OFDM(0xA8)	/* Divider search gain/index */
52#define B43_PHY_CLIPP2THRES		B43_PHY_OFDM(0xA9)
53#define B43_PHY_CLIPP3THRES		B43_PHY_OFDM(0xAA)
54#define B43_PHY_DIVP1P2GAIN		B43_PHY_OFDM(0xAB)
55#define B43_PHY_DIVSRCHGAINBACK		B43_PHY_OFDM(0xAD)	/* Divider search gain back */
56#define B43_PHY_DIVSRCHGAINCHNG		B43_PHY_OFDM(0xAE)	/* Divider search gain change */
57#define B43_PHY_CRSTHRES1		B43_PHY_OFDM(0xC0)	/* CRS Threshold 1 (phy.rev >= 2 only) */
58#define B43_PHY_CRSTHRES2		B43_PHY_OFDM(0xC1)	/* CRS Threshold 2 (phy.rev >= 2 only) */
59#define B43_PHY_TSSIP_LTBASE		B43_PHY_OFDM(0x380)	/* TSSI power lookup table base */
60#define B43_PHY_DC_LTBASE		B43_PHY_OFDM(0x3A0)	/* DC lookup table base */
61#define B43_PHY_GAIN_LTBASE		B43_PHY_OFDM(0x3C0)	/* Gain lookup table base */
62
63/*** OFDM table numbers ***/
64#define B43_OFDMTAB(number, offset)	(((number) << B43_PHY_OTABLENR_SHIFT) | (offset))
65#define B43_OFDMTAB_AGC1		B43_OFDMTAB(0x00, 0)
66#define B43_OFDMTAB_GAIN0		B43_OFDMTAB(0x00, 0)
67#define B43_OFDMTAB_GAINX		B43_OFDMTAB(0x01, 0)	//TODO rename
68#define B43_OFDMTAB_GAIN1		B43_OFDMTAB(0x01, 4)
69#define B43_OFDMTAB_AGC3		B43_OFDMTAB(0x02, 0)
70#define B43_OFDMTAB_GAIN2		B43_OFDMTAB(0x02, 3)
71#define B43_OFDMTAB_LNAHPFGAIN1		B43_OFDMTAB(0x03, 0)
72#define B43_OFDMTAB_WRSSI		B43_OFDMTAB(0x04, 0)
73#define B43_OFDMTAB_LNAHPFGAIN2		B43_OFDMTAB(0x04, 0)
74#define B43_OFDMTAB_NOISESCALE		B43_OFDMTAB(0x05, 0)
75#define B43_OFDMTAB_AGC2		B43_OFDMTAB(0x06, 0)
76#define B43_OFDMTAB_ROTOR		B43_OFDMTAB(0x08, 0)
77#define B43_OFDMTAB_ADVRETARD		B43_OFDMTAB(0x09, 0)
78#define B43_OFDMTAB_DAC			B43_OFDMTAB(0x0C, 0)
79#define B43_OFDMTAB_DC			B43_OFDMTAB(0x0E, 7)
80#define B43_OFDMTAB_PWRDYN2		B43_OFDMTAB(0x0E, 12)
81#define B43_OFDMTAB_LNAGAIN		B43_OFDMTAB(0x0E, 13)
82#define B43_OFDMTAB_UNKNOWN_0F		B43_OFDMTAB(0x0F, 0)	//TODO rename
83#define B43_OFDMTAB_UNKNOWN_APHY	B43_OFDMTAB(0x0F, 7)	//TODO rename
84#define B43_OFDMTAB_LPFGAIN		B43_OFDMTAB(0x0F, 12)
85#define B43_OFDMTAB_RSSI		B43_OFDMTAB(0x10, 0)
86#define B43_OFDMTAB_UNKNOWN_11		B43_OFDMTAB(0x11, 4)	//TODO rename
87#define B43_OFDMTAB_AGC1_R1		B43_OFDMTAB(0x13, 0)
88#define B43_OFDMTAB_GAINX_R1		B43_OFDMTAB(0x14, 0)	//TODO remove!
89#define B43_OFDMTAB_MINSIGSQ		B43_OFDMTAB(0x14, 0)
90#define B43_OFDMTAB_AGC3_R1		B43_OFDMTAB(0x15, 0)
91#define B43_OFDMTAB_WRSSI_R1		B43_OFDMTAB(0x15, 4)
92#define B43_OFDMTAB_TSSI		B43_OFDMTAB(0x15, 0)
93#define B43_OFDMTAB_DACRFPABB		B43_OFDMTAB(0x16, 0)
94#define B43_OFDMTAB_DACOFF		B43_OFDMTAB(0x17, 0)
95#define B43_OFDMTAB_DCBIAS		B43_OFDMTAB(0x18, 0)
96
97u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset);
98void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table,
99			 u16 offset, u16 value);
100u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset);
101void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table,
102			 u16 offset, u32 value);
103
104
105struct b43_phy_a {
106	/* Pointer to the table used to convert a
107	 * TSSI value to dBm-Q5.2 */
108	const s8 *tssi2dbm;
109	/* Target idle TSSI */
110	int tgt_idle_tssi;
111	/* Current idle TSSI */
112	int cur_idle_tssi;
113
114	/* A-PHY TX Power control value. */
115	u16 txpwr_offset;
116
117	//TODO lots of missing stuff
118};
119
120/**
121 * b43_phy_inita - Lowlevel A-PHY init routine.
122 * This is _only_ used by the G-PHY code.
123 */
124void b43_phy_inita(struct b43_wldev *dev);
125
126
127struct b43_phy_operations;
128extern const struct b43_phy_operations b43_phyops_a;
129
130#endif /* LINUX_B43_PHY_A_H_ */
131