• Home
  • History
  • Annotate
  • Line#
  • Navigate
  • Raw
  • Download
  • only in /netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/drivers/net/igbvf/
1/*******************************************************************************
2
3  Intel(R) 82576 Virtual Function Linux driver
4  Copyright(c) 1999 - 2009 Intel Corporation.
5
6  This program is free software; you can redistribute it and/or modify it
7  under the terms and conditions of the GNU General Public License,
8  version 2, as published by the Free Software Foundation.
9
10  This program is distributed in the hope it will be useful, but WITHOUT
11  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  more details.
14
15  You should have received a copy of the GNU General Public License along with
16  this program; if not, write to the Free Software Foundation, Inc.,
17  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18
19  The full GNU General Public License is included in this distribution in
20  the file called "COPYING".
21
22  Contact Information:
23  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
24  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25
26*******************************************************************************/
27
28#ifndef _E1000_DEFINES_H_
29#define _E1000_DEFINES_H_
30
31/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
32#define REQ_TX_DESCRIPTOR_MULTIPLE  8
33#define REQ_RX_DESCRIPTOR_MULTIPLE  8
34
35/* IVAR valid bit */
36#define E1000_IVAR_VALID        0x80
37
38/* Receive Descriptor bit definitions */
39#define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
40#define E1000_RXD_STAT_EOP      0x02    /* End of Packet */
41#define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */
42#define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
43#define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum calculated */
44#define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */
45#define E1000_RXD_STAT_IPCS     0x40    /* IP xsum calculated */
46#define E1000_RXD_ERR_SE        0x02    /* Symbol Error */
47#define E1000_RXD_SPC_VLAN_MASK 0x0FFF  /* VLAN ID is in lower 12 bits */
48
49#define E1000_RXDEXT_STATERR_CE    0x01000000
50#define E1000_RXDEXT_STATERR_SE    0x02000000
51#define E1000_RXDEXT_STATERR_SEQ   0x04000000
52#define E1000_RXDEXT_STATERR_CXE   0x10000000
53#define E1000_RXDEXT_STATERR_TCPE  0x20000000
54#define E1000_RXDEXT_STATERR_IPE   0x40000000
55#define E1000_RXDEXT_STATERR_RXE   0x80000000
56
57
58/* Same mask, but for extended and packet split descriptors */
59#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
60    E1000_RXDEXT_STATERR_CE  |            \
61    E1000_RXDEXT_STATERR_SE  |            \
62    E1000_RXDEXT_STATERR_SEQ |            \
63    E1000_RXDEXT_STATERR_CXE |            \
64    E1000_RXDEXT_STATERR_RXE)
65
66/* Device Control */
67#define E1000_CTRL_RST      0x04000000  /* Global reset */
68
69/* Device Status */
70#define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
71#define E1000_STATUS_LU         0x00000002      /* Link up.0=no,1=link */
72#define E1000_STATUS_TXOFF      0x00000010      /* transmission paused */
73#define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */
74#define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
75#define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
76
77#define SPEED_10    10
78#define SPEED_100   100
79#define SPEED_1000  1000
80#define HALF_DUPLEX 1
81#define FULL_DUPLEX 2
82
83/* Transmit Descriptor bit definitions */
84#define E1000_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */
85#define E1000_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */
86#define E1000_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */
87#define E1000_TXD_STAT_DD    0x00000001 /* Descriptor Done */
88
89#define MAX_JUMBO_FRAME_SIZE    0x3F00
90
91/* 802.1q VLAN Packet Size */
92#define VLAN_TAG_SIZE              4    /* 802.3ac tag (not DMA'd) */
93
94/* Error Codes */
95#define E1000_SUCCESS      0
96#define E1000_ERR_CONFIG   3
97#define E1000_ERR_MAC_INIT 5
98#define E1000_ERR_MBX      15
99
100#ifndef ETH_ADDR_LEN
101#define ETH_ADDR_LEN                 6
102#endif
103
104/* SRRCTL bit definitions */
105#define E1000_SRRCTL_BSIZEPKT_SHIFT                     10 /* Shift _right_ */
106#define E1000_SRRCTL_BSIZEHDRSIZE_MASK                  0x00000F00
107#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT                 2  /* Shift _left_ */
108#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF                0x02000000
109#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS          0x0A000000
110#define E1000_SRRCTL_DESCTYPE_MASK                      0x0E000000
111#define E1000_SRRCTL_DROP_EN                            0x80000000
112
113#define E1000_SRRCTL_BSIZEPKT_MASK      0x0000007F
114#define E1000_SRRCTL_BSIZEHDR_MASK      0x00003F00
115
116/* Additional Descriptor Control definitions */
117#define E1000_TXDCTL_QUEUE_ENABLE  0x02000000 /* Enable specific Tx Queue */
118#define E1000_RXDCTL_QUEUE_ENABLE  0x02000000 /* Enable specific Rx Queue */
119
120/* Direct Cache Access (DCA) definitions */
121#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
122
123#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
124
125#endif /* _E1000_DEFINES_H_ */
126