1# 2# Input core configuration 3# 4config SERIO 5 tristate "Serial I/O support" if EMBEDDED || !X86 6 default y 7 help 8 Say Yes here if you have any input device that uses serial I/O to 9 communicate with the system. This includes the 10 * standard AT keyboard and PS/2 mouse * 11 as well as serial mice, Sun keyboards, some joysticks and 6dof 12 devices and more. 13 14 If unsure, say Y. 15 16 To compile this driver as a module, choose M here: the 17 module will be called serio. 18 19if SERIO 20 21config SERIO_I8042 22 tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86 23 default y 24 depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \ 25 (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN 26 help 27 i8042 is the chip over which the standard AT keyboard and PS/2 28 mouse are connected to the computer. If you use these devices, 29 you'll need to say Y here. 30 31 If unsure, say Y. 32 33 To compile this driver as a module, choose M here: the 34 module will be called i8042. 35 36config SERIO_SERPORT 37 tristate "Serial port line discipline" 38 default y 39 help 40 Say Y here if you plan to use an input device (mouse, joystick, 41 tablet, 6dof) that communicates over the RS232 serial (COM) port. 42 43 More information is available: <file:Documentation/input/input.txt> 44 45 If unsure, say Y. 46 47 To compile this driver as a module, choose M here: the 48 module will be called serport. 49 50config SERIO_CT82C710 51 tristate "ct82c710 Aux port controller" 52 depends on X86 53 help 54 Say Y here if you have a Texas Instruments TravelMate notebook 55 equipped with the ct82c710 chip and want to use a mouse connected 56 to the "QuickPort". 57 58 If unsure, say N. 59 60 To compile this driver as a module, choose M here: the 61 module will be called ct82c710. 62 63config SERIO_Q40KBD 64 tristate "Q40 keyboard controller" 65 depends on Q40 66 67config SERIO_PARKBD 68 tristate "Parallel port keyboard adapter" 69 depends on PARPORT 70 help 71 Say Y here if you built a simple parallel port adapter to attach 72 an additional AT keyboard, XT keyboard or PS/2 mouse. 73 74 More information is available: <file:Documentation/input/input.txt> 75 76 If unsure, say N. 77 78 To compile this driver as a module, choose M here: the 79 module will be called parkbd. 80 81config SERIO_RPCKBD 82 tristate "Acorn RiscPC keyboard controller" 83 depends on ARCH_ACORN 84 default y 85 help 86 Say Y here if you have the Acorn RiscPC and want to use an AT 87 keyboard connected to its keyboard controller. 88 89 To compile this driver as a module, choose M here: the 90 module will be called rpckbd. 91 92config SERIO_AT32PSIF 93 tristate "AVR32 PSIF PS/2 keyboard and mouse controller" 94 depends on AVR32 95 help 96 Say Y here if you want to use the PSIF peripheral on AVR32 devices 97 and connect a PS/2 keyboard and/or mouse to it. 98 99 To compile this driver as a module, choose M here: the module will 100 be called at32psif. 101 102config SERIO_AMBAKMI 103 tristate "AMBA KMI keyboard controller" 104 depends on ARM_AMBA 105 106config SERIO_SA1111 107 tristate "Intel SA1111 keyboard controller" 108 depends on SA1111 109 110config SERIO_GSCPS2 111 tristate "HP GSC PS/2 keyboard and PS/2 mouse controller" 112 depends on GSC 113 default y 114 help 115 This driver provides support for the PS/2 ports on PA-RISC machines 116 over which HP PS/2 keyboards and PS/2 mice may be connected. 117 If you use these devices, you'll need to say Y here. 118 119 It's safe to enable this driver, so if unsure, say Y. 120 121 To compile this driver as a module, choose M here: the 122 module will be called gscps2. 123 124config HP_SDC 125 tristate "HP System Device Controller i8042 Support" 126 depends on (GSC || HP300) && SERIO 127 default y 128 help 129 This option enables support for the "System Device 130 Controller", an i8042 carrying microcode to manage a 131 few miscellaneous devices on some Hewlett Packard systems. 132 The SDC itself contains a 10ms resolution timer/clock capable 133 of delivering interrupts on a periodic and one-shot basis. 134 The SDC may also be connected to a battery-backed real-time 135 clock, a basic audio waveform generator, and an HP-HIL Master 136 Link Controller serving up to seven input devices. 137 138 By itself this option is rather useless, but enabling it will 139 enable selection of drivers for the abovementioned devices. 140 It is, however, incompatible with the old, reliable HIL keyboard 141 driver, and the new HIL driver is experimental, so if you plan 142 to use a HIL keyboard as your primary keyboard, you may wish 143 to keep using that driver until the new HIL drivers have had 144 more testing. 145 146config HIL_MLC 147 tristate "HIL MLC Support (needed for HIL input devices)" 148 depends on HP_SDC 149 150config SERIO_PCIPS2 151 tristate "PCI PS/2 keyboard and PS/2 mouse controller" 152 depends on PCI 153 help 154 Say Y here if you have a Mobility Docking station with PS/2 155 keyboard and mice ports. 156 157 To compile this driver as a module, choose M here: the 158 module will be called pcips2. 159 160config SERIO_MACEPS2 161 tristate "SGI O2 MACE PS/2 controller" 162 depends on SGI_IP32 163 help 164 Say Y here if you have SGI O2 workstation and want to use its 165 PS/2 ports. 166 167 To compile this driver as a module, choose M here: the 168 module will be called maceps2. 169 170config SERIO_LIBPS2 171 tristate "PS/2 driver library" if EMBEDDED 172 depends on SERIO_I8042 || SERIO_I8042=n 173 help 174 Say Y here if you are using a driver for device connected 175 to a PS/2 port, such as PS/2 mouse or standard AT keyboard. 176 177 To compile this driver as a module, choose M here: the 178 module will be called libps2. 179 180config SERIO_RAW 181 tristate "Raw access to serio ports" 182 help 183 Say Y here if you want to have raw access to serio ports, such as 184 AUX ports on i8042 keyboard controller. Each serio port that is 185 bound to this driver will be accessible via a char device with 186 major 10 and dynamically allocated minor. The driver will try 187 allocating minor 1 (that historically corresponds to /dev/psaux) 188 first. To bind this driver to a serio port use sysfs interface: 189 190 echo -n "serio_raw" > /sys/bus/serio/devices/serioX/drvctl 191 192 To compile this driver as a module, choose M here: the 193 module will be called serio_raw. 194 195config SERIO_XILINX_XPS_PS2 196 tristate "Xilinx XPS PS/2 Controller Support" 197 depends on PPC || MICROBLAZE 198 help 199 This driver supports XPS PS/2 IP from the Xilinx EDK on 200 PowerPC platform. 201 202 To compile this driver as a module, choose M here: the 203 module will be called xilinx_ps2. 204 205config SERIO_ALTERA_PS2 206 tristate "Altera UP PS/2 controller" 207 help 208 Say Y here if you have Altera University Program PS/2 ports. 209 210 To compile this driver as a module, choose M here: the 211 module will be called altera_ps2. 212 213config SERIO_AMS_DELTA 214 tristate "Amstrad Delta (E3) mailboard support" 215 depends on MACH_AMS_DELTA 216 default y 217 select AMS_DELTA_FIQ 218 ---help--- 219 Say Y here if you have an E3 and want to use its mailboard, 220 or any standard AT keyboard connected to the mailboard port. 221 222 When used for the E3 mailboard, a non-standard key table 223 must be loaded from userspace, possibly using udev extras 224 provided keymap helper utility. 225 226 To compile this driver as a module, choose M here; 227 the module will be called ams_delta_serio. 228 229endif 230