1/* 2 * Copyright (C) 1995 Linus Torvalds 3 * Adapted from 'alpha' version by Gary Thomas 4 * Modified by Cort Dougan (cort@cs.nmt.edu) 5 */ 6 7/* 8 * bootup setup stuff.. 9 */ 10 11#include <linux/errno.h> 12#include <linux/sched.h> 13#include <linux/kernel.h> 14#include <linux/mm.h> 15#include <linux/stddef.h> 16#include <linux/unistd.h> 17#include <linux/ptrace.h> 18#include <linux/user.h> 19#include <linux/tty.h> 20#include <linux/major.h> 21#include <linux/interrupt.h> 22#include <linux/reboot.h> 23#include <linux/init.h> 24#include <linux/pci.h> 25#include <generated/utsrelease.h> 26#include <linux/adb.h> 27#include <linux/module.h> 28#include <linux/delay.h> 29#include <linux/console.h> 30#include <linux/seq_file.h> 31#include <linux/root_dev.h> 32#include <linux/initrd.h> 33#include <linux/timer.h> 34 35#include <asm/io.h> 36#include <asm/pgtable.h> 37#include <asm/prom.h> 38#include <asm/pci-bridge.h> 39#include <asm/dma.h> 40#include <asm/machdep.h> 41#include <asm/irq.h> 42#include <asm/hydra.h> 43#include <asm/sections.h> 44#include <asm/time.h> 45#include <asm/i8259.h> 46#include <asm/mpic.h> 47#include <asm/rtas.h> 48#include <asm/xmon.h> 49 50#include "chrp.h" 51#include "gg2.h" 52 53void rtas_indicator_progress(char *, unsigned short); 54 55int _chrp_type; 56EXPORT_SYMBOL(_chrp_type); 57 58static struct mpic *chrp_mpic; 59 60/* Used for doing CHRP event-scans */ 61DEFINE_PER_CPU(struct timer_list, heartbeat_timer); 62unsigned long event_scan_interval; 63 64extern unsigned long loops_per_jiffy; 65 66/* To be replaced by RTAS when available */ 67static unsigned int __iomem *briq_SPOR; 68 69#ifdef CONFIG_SMP 70extern struct smp_ops_t chrp_smp_ops; 71#endif 72 73static const char *gg2_memtypes[4] = { 74 "FPM", "SDRAM", "EDO", "BEDO" 75}; 76static const char *gg2_cachesizes[4] = { 77 "256 KB", "512 KB", "1 MB", "Reserved" 78}; 79static const char *gg2_cachetypes[4] = { 80 "Asynchronous", "Reserved", "Flow-Through Synchronous", 81 "Pipelined Synchronous" 82}; 83static const char *gg2_cachemodes[4] = { 84 "Disabled", "Write-Through", "Copy-Back", "Transparent Mode" 85}; 86 87static const char *chrp_names[] = { 88 "Unknown", 89 "","","", 90 "Motorola", 91 "IBM or Longtrail", 92 "Genesi Pegasos", 93 "Total Impact Briq" 94}; 95 96void chrp_show_cpuinfo(struct seq_file *m) 97{ 98 int i, sdramen; 99 unsigned int t; 100 struct device_node *root; 101 const char *model = ""; 102 103 root = of_find_node_by_path("/"); 104 if (root) 105 model = of_get_property(root, "model", NULL); 106 seq_printf(m, "machine\t\t: CHRP %s\n", model); 107 108 /* longtrail (goldengate) stuff */ 109 if (model && !strncmp(model, "IBM,LongTrail", 13)) { 110 /* VLSI VAS96011/12 `Golden Gate 2' */ 111 /* Memory banks */ 112 sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL) 113 >>31) & 1; 114 for (i = 0; i < (sdramen ? 4 : 6); i++) { 115 t = in_le32(gg2_pci_config_base+ 116 GG2_PCI_DRAM_BANK0+ 117 i*4); 118 if (!(t & 1)) 119 continue; 120 switch ((t>>8) & 0x1f) { 121 case 0x1f: 122 model = "4 MB"; 123 break; 124 case 0x1e: 125 model = "8 MB"; 126 break; 127 case 0x1c: 128 model = "16 MB"; 129 break; 130 case 0x18: 131 model = "32 MB"; 132 break; 133 case 0x10: 134 model = "64 MB"; 135 break; 136 case 0x00: 137 model = "128 MB"; 138 break; 139 default: 140 model = "Reserved"; 141 break; 142 } 143 seq_printf(m, "memory bank %d\t: %s %s\n", i, model, 144 gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]); 145 } 146 /* L2 cache */ 147 t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL); 148 seq_printf(m, "board l2\t: %s %s (%s)\n", 149 gg2_cachesizes[(t>>7) & 3], 150 gg2_cachetypes[(t>>2) & 3], 151 gg2_cachemodes[t & 3]); 152 } 153 of_node_put(root); 154} 155 156/* 157 * Fixes for the National Semiconductor PC78308VUL SuperI/O 158 * 159 * Some versions of Open Firmware incorrectly initialize the IRQ settings 160 * for keyboard and mouse 161 */ 162static inline void __init sio_write(u8 val, u8 index) 163{ 164 outb(index, 0x15c); 165 outb(val, 0x15d); 166} 167 168static inline u8 __init sio_read(u8 index) 169{ 170 outb(index, 0x15c); 171 return inb(0x15d); 172} 173 174static void __init sio_fixup_irq(const char *name, u8 device, u8 level, 175 u8 type) 176{ 177 u8 level0, type0, active; 178 179 /* select logical device */ 180 sio_write(device, 0x07); 181 active = sio_read(0x30); 182 level0 = sio_read(0x70); 183 type0 = sio_read(0x71); 184 if (level0 != level || type0 != type || !active) { 185 printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: " 186 "remapping to level %d, type %d, active\n", 187 name, level0, type0, !active ? "in" : "", level, type); 188 sio_write(0x01, 0x30); 189 sio_write(level, 0x70); 190 sio_write(type, 0x71); 191 } 192} 193 194static void __init sio_init(void) 195{ 196 struct device_node *root; 197 const char *model; 198 199 root = of_find_node_by_path("/"); 200 if (!root) 201 return; 202 203 model = of_get_property(root, "model", NULL); 204 if (model && !strncmp(model, "IBM,LongTrail", 13)) { 205 /* logical device 0 (KBC/Keyboard) */ 206 sio_fixup_irq("keyboard", 0, 1, 2); 207 /* select logical device 1 (KBC/Mouse) */ 208 sio_fixup_irq("mouse", 1, 12, 2); 209 } 210 211 of_node_put(root); 212} 213 214 215static void __init pegasos_set_l2cr(void) 216{ 217 struct device_node *np; 218 219 /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */ 220 if (_chrp_type != _CHRP_Pegasos) 221 return; 222 223 /* Enable L2 cache if needed */ 224 np = of_find_node_by_type(NULL, "cpu"); 225 if (np != NULL) { 226 const unsigned int *l2cr = of_get_property(np, "l2cr", NULL); 227 if (l2cr == NULL) { 228 printk ("Pegasos l2cr : no cpu l2cr property found\n"); 229 goto out; 230 } 231 if (!((*l2cr) & 0x80000000)) { 232 printk ("Pegasos l2cr : L2 cache was not active, " 233 "activating\n"); 234 _set_L2CR(0); 235 _set_L2CR((*l2cr) | 0x80000000); 236 } 237 } 238out: 239 of_node_put(np); 240} 241 242static void briq_restart(char *cmd) 243{ 244 local_irq_disable(); 245 if (briq_SPOR) 246 out_be32(briq_SPOR, 0); 247 for(;;); 248} 249 250/* 251 * Per default, input/output-device points to the keyboard/screen 252 * If no card is installed, the built-in serial port is used as a fallback. 253 * But unfortunately, the firmware does not connect /chosen/{stdin,stdout} 254 * the the built-in serial node. Instead, a /failsafe node is created. 255 */ 256static void chrp_init_early(void) 257{ 258 struct device_node *node; 259 const char *property; 260 261 if (strstr(cmd_line, "console=")) 262 return; 263 /* find the boot console from /chosen/stdout */ 264 if (!of_chosen) 265 return; 266 node = of_find_node_by_path("/"); 267 if (!node) 268 return; 269 property = of_get_property(node, "model", NULL); 270 if (!property) 271 goto out_put; 272 if (strcmp(property, "Pegasos2")) 273 goto out_put; 274 /* this is a Pegasos2 */ 275 property = of_get_property(of_chosen, "linux,stdout-path", NULL); 276 if (!property) 277 goto out_put; 278 of_node_put(node); 279 node = of_find_node_by_path(property); 280 if (!node) 281 return; 282 property = of_get_property(node, "device_type", NULL); 283 if (!property) 284 goto out_put; 285 if (strcmp(property, "serial")) 286 goto out_put; 287 /* 288 * The 9pin connector is either /failsafe 289 * or /pci@80000000/isa@C/serial@i2F8 290 * The optional graphics card has also type 'serial' in VGA mode. 291 */ 292 property = of_get_property(node, "name", NULL); 293 if (!property) 294 goto out_put; 295 if (!strcmp(property, "failsafe") || !strcmp(property, "serial")) 296 add_preferred_console("ttyS", 0, NULL); 297out_put: 298 of_node_put(node); 299} 300 301void __init chrp_setup_arch(void) 302{ 303 struct device_node *root = of_find_node_by_path("/"); 304 const char *machine = NULL; 305 306 /* init to some ~sane value until calibrate_delay() runs */ 307 loops_per_jiffy = 50000000/HZ; 308 309 if (root) 310 machine = of_get_property(root, "model", NULL); 311 if (machine && strncmp(machine, "Pegasos", 7) == 0) { 312 _chrp_type = _CHRP_Pegasos; 313 } else if (machine && strncmp(machine, "IBM", 3) == 0) { 314 _chrp_type = _CHRP_IBM; 315 } else if (machine && strncmp(machine, "MOT", 3) == 0) { 316 _chrp_type = _CHRP_Motorola; 317 } else if (machine && strncmp(machine, "TotalImpact,BRIQ-1", 18) == 0) { 318 _chrp_type = _CHRP_briq; 319 /* Map the SPOR register on briq and change the restart hook */ 320 briq_SPOR = ioremap(0xff0000e8, 4); 321 ppc_md.restart = briq_restart; 322 } else { 323 /* Let's assume it is an IBM chrp if all else fails */ 324 _chrp_type = _CHRP_IBM; 325 } 326 of_node_put(root); 327 printk("chrp type = %x [%s]\n", _chrp_type, chrp_names[_chrp_type]); 328 329 rtas_initialize(); 330 if (rtas_token("display-character") >= 0) 331 ppc_md.progress = rtas_progress; 332 333 /* use RTAS time-of-day routines if available */ 334 if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) { 335 ppc_md.get_boot_time = rtas_get_boot_time; 336 ppc_md.get_rtc_time = rtas_get_rtc_time; 337 ppc_md.set_rtc_time = rtas_set_rtc_time; 338 } 339 340 /* On pegasos, enable the L2 cache if not already done by OF */ 341 pegasos_set_l2cr(); 342 343 /* Lookup PCI host bridges */ 344 chrp_find_bridges(); 345 346 /* 347 * Temporary fixes for PCI devices. 348 * -- Geert 349 */ 350 hydra_init(); /* Mac I/O */ 351 352 /* 353 * Fix the Super I/O configuration 354 */ 355 sio_init(); 356 357 pci_create_OF_bus_map(); 358 359 /* 360 * Print the banner, then scroll down so boot progress 361 * can be printed. -- Cort 362 */ 363 if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0); 364} 365 366static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc) 367{ 368 unsigned int cascade_irq = i8259_irq(); 369 if (cascade_irq != NO_IRQ) 370 generic_handle_irq(cascade_irq); 371 desc->chip->eoi(irq); 372} 373 374/* 375 * Finds the open-pic node and sets up the mpic driver. 376 */ 377static void __init chrp_find_openpic(void) 378{ 379 struct device_node *np, *root; 380 int len, i, j; 381 int isu_size, idu_size; 382 const unsigned int *iranges, *opprop = NULL; 383 int oplen = 0; 384 unsigned long opaddr; 385 int na = 1; 386 387 np = of_find_node_by_type(NULL, "open-pic"); 388 if (np == NULL) 389 return; 390 root = of_find_node_by_path("/"); 391 if (root) { 392 opprop = of_get_property(root, "platform-open-pic", &oplen); 393 na = of_n_addr_cells(root); 394 } 395 if (opprop && oplen >= na * sizeof(unsigned int)) { 396 opaddr = opprop[na-1]; /* assume 32-bit */ 397 oplen /= na * sizeof(unsigned int); 398 } else { 399 struct resource r; 400 if (of_address_to_resource(np, 0, &r)) { 401 goto bail; 402 } 403 opaddr = r.start; 404 oplen = 0; 405 } 406 407 printk(KERN_INFO "OpenPIC at %lx\n", opaddr); 408 409 iranges = of_get_property(np, "interrupt-ranges", &len); 410 if (iranges == NULL) 411 len = 0; /* non-distributed mpic */ 412 else 413 len /= 2 * sizeof(unsigned int); 414 415 /* 416 * The first pair of cells in interrupt-ranges refers to the 417 * IDU; subsequent pairs refer to the ISUs. 418 */ 419 if (oplen < len) { 420 printk(KERN_ERR "Insufficient addresses for distributed" 421 " OpenPIC (%d < %d)\n", oplen, len); 422 len = oplen; 423 } 424 425 isu_size = 0; 426 idu_size = 0; 427 if (len > 0 && iranges[1] != 0) { 428 printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n", 429 iranges[0], iranges[0] + iranges[1] - 1); 430 idu_size = iranges[1]; 431 } 432 if (len > 1) 433 isu_size = iranges[3]; 434 435 chrp_mpic = mpic_alloc(np, opaddr, MPIC_PRIMARY, 436 isu_size, 0, " MPIC "); 437 if (chrp_mpic == NULL) { 438 printk(KERN_ERR "Failed to allocate MPIC structure\n"); 439 goto bail; 440 } 441 j = na - 1; 442 for (i = 1; i < len; ++i) { 443 iranges += 2; 444 j += na; 445 printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n", 446 iranges[0], iranges[0] + iranges[1] - 1, 447 opprop[j]); 448 mpic_assign_isu(chrp_mpic, i - 1, opprop[j]); 449 } 450 451 mpic_init(chrp_mpic); 452 ppc_md.get_irq = mpic_get_irq; 453 bail: 454 of_node_put(root); 455 of_node_put(np); 456} 457 458#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) 459static struct irqaction xmon_irqaction = { 460 .handler = xmon_irq, 461 .name = "XMON break", 462}; 463#endif 464 465static void __init chrp_find_8259(void) 466{ 467 struct device_node *np, *pic = NULL; 468 unsigned long chrp_int_ack = 0; 469 unsigned int cascade_irq; 470 471 /* Look for cascade */ 472 for_each_node_by_type(np, "interrupt-controller") 473 if (of_device_is_compatible(np, "chrp,iic")) { 474 pic = np; 475 break; 476 } 477 /* Ok, 8259 wasn't found. We need to handle the case where 478 * we have a pegasos that claims to be chrp but doesn't have 479 * a proper interrupt tree 480 */ 481 if (pic == NULL && chrp_mpic != NULL) { 482 printk(KERN_ERR "i8259: Not found in device-tree" 483 " assuming no legacy interrupts\n"); 484 return; 485 } 486 487 /* Look for intack. In a perfect world, we would look for it on 488 * the ISA bus that holds the 8259 but heh... Works that way. If 489 * we ever see a problem, we can try to re-use the pSeries code here. 490 * Also, Pegasos-type platforms don't have a proper node to start 491 * from anyway 492 */ 493 for_each_node_by_name(np, "pci") { 494 const unsigned int *addrp = of_get_property(np, 495 "8259-interrupt-acknowledge", NULL); 496 497 if (addrp == NULL) 498 continue; 499 chrp_int_ack = addrp[of_n_addr_cells(np)-1]; 500 break; 501 } 502 of_node_put(np); 503 if (np == NULL) 504 printk(KERN_WARNING "Cannot find PCI interrupt acknowledge" 505 " address, polling\n"); 506 507 i8259_init(pic, chrp_int_ack); 508 if (ppc_md.get_irq == NULL) { 509 ppc_md.get_irq = i8259_irq; 510 irq_set_default_host(i8259_get_host()); 511 } 512 if (chrp_mpic != NULL) { 513 cascade_irq = irq_of_parse_and_map(pic, 0); 514 if (cascade_irq == NO_IRQ) 515 printk(KERN_ERR "i8259: failed to map cascade irq\n"); 516 else 517 set_irq_chained_handler(cascade_irq, 518 chrp_8259_cascade); 519 } 520} 521 522void __init chrp_init_IRQ(void) 523{ 524#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) 525 struct device_node *kbd; 526#endif 527 chrp_find_openpic(); 528 chrp_find_8259(); 529 530#ifdef CONFIG_SMP 531 /* Pegasos has no MPIC, those ops would make it crash. It might be an 532 * option to move setting them to after we probe the PIC though 533 */ 534 if (chrp_mpic != NULL) 535 smp_ops = &chrp_smp_ops; 536#endif /* CONFIG_SMP */ 537 538 if (_chrp_type == _CHRP_Pegasos) 539 ppc_md.get_irq = i8259_irq; 540 541#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) 542 /* see if there is a keyboard in the device tree 543 with a parent of type "adb" */ 544 for_each_node_by_name(kbd, "keyboard") 545 if (kbd->parent && kbd->parent->type 546 && strcmp(kbd->parent->type, "adb") == 0) 547 break; 548 of_node_put(kbd); 549 if (kbd) 550 setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction); 551#endif 552} 553 554void __init 555chrp_init2(void) 556{ 557#ifdef CONFIG_NVRAM 558 chrp_nvram_init(); 559#endif 560 561 request_region(0x20,0x20,"pic1"); 562 request_region(0xa0,0x20,"pic2"); 563 request_region(0x00,0x20,"dma1"); 564 request_region(0x40,0x20,"timer"); 565 request_region(0x80,0x10,"dma page reg"); 566 request_region(0xc0,0x20,"dma2"); 567 568 if (ppc_md.progress) 569 ppc_md.progress(" Have fun! ", 0x7777); 570} 571 572static int __init chrp_probe(void) 573{ 574 char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(), 575 "device_type", NULL); 576 if (dtype == NULL) 577 return 0; 578 if (strcmp(dtype, "chrp")) 579 return 0; 580 581 ISA_DMA_THRESHOLD = ~0L; 582 DMA_MODE_READ = 0x44; 583 DMA_MODE_WRITE = 0x48; 584 585 return 1; 586} 587 588define_machine(chrp) { 589 .name = "CHRP", 590 .probe = chrp_probe, 591 .setup_arch = chrp_setup_arch, 592 .init = chrp_init2, 593 .init_early = chrp_init_early, 594 .show_cpuinfo = chrp_show_cpuinfo, 595 .init_IRQ = chrp_init_IRQ, 596 .restart = rtas_restart, 597 .power_off = rtas_power_off, 598 .halt = rtas_halt, 599 .time_init = chrp_time_init, 600 .set_rtc_time = chrp_set_rtc_time, 601 .get_rtc_time = chrp_get_rtc_time, 602 .calibrate_decr = generic_calibrate_decr, 603 .phys_mem_access_prot = pci_phys_mem_access_prot, 604}; 605