1/* 2 * This file is subject to the terms and conditions of the GNU General Public 3 * License. See the file "COPYING" in the main directory of this archive 4 * for more details. 5 * 6 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> 7 */ 8 9#include <linux/init.h> 10#include <linux/kernel.h> 11#include <linux/delay.h> 12#include <linux/bootmem.h> 13#include <linux/ioport.h> 14#include <linux/pm.h> 15#include <asm/bootinfo.h> 16#include <asm/time.h> 17#include <asm/reboot.h> 18#include <asm/cacheflush.h> 19#include <bcm63xx_board.h> 20#include <bcm63xx_cpu.h> 21#include <bcm63xx_regs.h> 22#include <bcm63xx_io.h> 23 24void bcm63xx_machine_halt(void) 25{ 26 printk(KERN_INFO "System halted\n"); 27 while (1) 28 ; 29} 30 31static void bcm6348_a1_reboot(void) 32{ 33 u32 reg; 34 35 /* soft reset all blocks */ 36 printk(KERN_INFO "soft-reseting all blocks ...\n"); 37 reg = bcm_perf_readl(PERF_SOFTRESET_REG); 38 reg &= ~SOFTRESET_6348_ALL; 39 bcm_perf_writel(reg, PERF_SOFTRESET_REG); 40 mdelay(10); 41 42 reg = bcm_perf_readl(PERF_SOFTRESET_REG); 43 reg |= SOFTRESET_6348_ALL; 44 bcm_perf_writel(reg, PERF_SOFTRESET_REG); 45 mdelay(10); 46 47 /* Jump to the power on address. */ 48 printk(KERN_INFO "jumping to reset vector.\n"); 49 /* set high vectors (base at 0xbfc00000 */ 50 set_c0_status(ST0_BEV | ST0_ERL); 51 /* run uncached in kseg0 */ 52 change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); 53 __flush_cache_all(); 54 /* remove all wired TLB entries */ 55 write_c0_wired(0); 56 __asm__ __volatile__( 57 "jr\t%0" 58 : 59 : "r" (0xbfc00000)); 60 while (1) 61 ; 62} 63 64void bcm63xx_machine_reboot(void) 65{ 66 u32 reg; 67 68 /* mask and clear all external irq */ 69 reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); 70 reg &= ~EXTIRQ_CFG_MASK_ALL; 71 reg |= EXTIRQ_CFG_CLEAR_ALL; 72 bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); 73 74 if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1)) 75 bcm6348_a1_reboot(); 76 77 printk(KERN_INFO "triggering watchdog soft-reset...\n"); 78 reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG); 79 reg |= SYS_PLL_SOFT_RESET; 80 bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG); 81 while (1) 82 ; 83} 84 85static void __bcm63xx_machine_reboot(char *p) 86{ 87 bcm63xx_machine_reboot(); 88} 89 90/* 91 * return system type in /proc/cpuinfo 92 */ 93const char *get_system_type(void) 94{ 95 static char buf[128]; 96 snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%04X)", 97 board_get_name(), 98 bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev()); 99 return buf; 100} 101 102void __init plat_time_init(void) 103{ 104 mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2; 105} 106 107void __init plat_mem_setup(void) 108{ 109 add_memory_region(0, bcm63xx_get_memory_size(), BOOT_MEM_RAM); 110 111 _machine_halt = bcm63xx_machine_halt; 112 _machine_restart = __bcm63xx_machine_reboot; 113 pm_power_off = bcm63xx_machine_halt; 114 115 set_io_port_base(0); 116 ioport_resource.start = 0; 117 ioport_resource.end = ~0; 118 119 board_setup(); 120} 121 122int __init bcm63xx_register_devices(void) 123{ 124 return board_register_devices(); 125} 126 127arch_initcall(bcm63xx_register_devices); 128