• Home
  • History
  • Annotate
  • Line#
  • Navigate
  • Raw
  • Download
  • only in /netgear-R7000-V1.0.7.12_1.2.5/components/opensource/linux/linux-2.6.36/arch/mips/alchemy/devboards/pb1550/
1/*
2 *
3 * BRIEF MODULE DESCRIPTION
4 *	Alchemy Pb1550 board setup.
5 *
6 * Copyright 2000, 2008 MontaVista Software Inc.
7 * Author: MontaVista Software, Inc. <source@mvista.com>
8 *
9 *  This program is free software; you can redistribute  it and/or modify it
10 *  under  the terms of  the GNU General  Public License as published by the
11 *  Free Software Foundation;  either version 2 of the  License, or (at your
12 *  option) any later version.
13 *
14 *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
15 *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
16 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
17 *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
18 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
19 *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
20 *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
21 *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
22 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
23 *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24 *
25 *  You should have received a copy of the  GNU General Public License along
26 *  with this program; if not, write  to the Free Software Foundation, Inc.,
27 *  675 Mass Ave, Cambridge, MA 02139, USA.
28 */
29
30#include <linux/init.h>
31#include <linux/interrupt.h>
32
33#include <asm/mach-au1x00/au1000.h>
34#include <asm/mach-pb1x00/pb1550.h>
35#include <asm/mach-db1x00/bcsr.h>
36#include <asm/mach-au1x00/gpio.h>
37
38#include <prom.h>
39
40
41char irq_tab_alchemy[][5] __initdata = {
42	[12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left)  */
43	[13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
44};
45
46const char *get_system_type(void)
47{
48	return "Alchemy Pb1550";
49}
50
51void __init board_setup(void)
52{
53	u32 pin_func;
54
55	bcsr_init(PB1550_BCSR_PHYS_ADDR,
56		  PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
57
58	alchemy_gpio2_enable();
59
60	/*
61	 * Enable PSC1 SYNC for AC'97.  Normaly done in audio driver,
62	 * but it is board specific code, so put it here.
63	 */
64	pin_func = au_readl(SYS_PINFUNC);
65	au_sync();
66	pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
67	au_writel(pin_func, SYS_PINFUNC);
68
69	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
70
71	printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
72}
73
74static int __init pb1550_init_irq(void)
75{
76	set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);
77	set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);
78	set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH);
79
80	/* enable both PCMCIA card irqs in the shared line */
81	alchemy_gpio2_enable_int(201);
82	alchemy_gpio2_enable_int(202);
83
84	return 0;
85}
86arch_initcall(pb1550_init_irq);
87