1/* 2 * 3 * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup 4 * 5 * Copyright (C) 2009-2010 Martin Michlmayr <tbm@cyrius.com> 6 * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com> 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License 10 * as published by the Free Software Foundation; either version 11 * 2 of the License, or (at your option) any later version. 12 */ 13 14#include <linux/kernel.h> 15#include <linux/init.h> 16#include <linux/platform_device.h> 17#include <linux/i2c.h> 18#include <linux/mv643xx_eth.h> 19#include <linux/ata_platform.h> 20#include <linux/gpio.h> 21#include <linux/gpio_keys.h> 22#include <linux/input.h> 23#include <asm/mach-types.h> 24#include <asm/mach/arch.h> 25#include <mach/kirkwood.h> 26#include "common.h" 27#include "mpp.h" 28#include "tsx1x-common.h" 29 30#define QNAP_TS41X_JUMPER_JP1 45 31 32static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = { 33 I2C_BOARD_INFO("s35390a", 0x30), 34}; 35 36static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = { 37 .phy_addr = MV643XX_ETH_PHY_ADDR(8), 38}; 39 40static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = { 41 .phy_addr = MV643XX_ETH_PHY_ADDR(0), 42}; 43 44static struct mv_sata_platform_data qnap_ts41x_sata_data = { 45 .n_ports = 2, 46}; 47 48static struct gpio_keys_button qnap_ts41x_buttons[] = { 49 { 50 .code = KEY_COPY, 51 .gpio = 43, 52 .desc = "USB Copy", 53 .active_low = 1, 54 }, 55 { 56 .code = KEY_RESTART, 57 .gpio = 37, 58 .desc = "Reset", 59 .active_low = 1, 60 }, 61}; 62 63static struct gpio_keys_platform_data qnap_ts41x_button_data = { 64 .buttons = qnap_ts41x_buttons, 65 .nbuttons = ARRAY_SIZE(qnap_ts41x_buttons), 66}; 67 68static struct platform_device qnap_ts41x_button_device = { 69 .name = "gpio-keys", 70 .id = -1, 71 .num_resources = 0, 72 .dev = { 73 .platform_data = &qnap_ts41x_button_data, 74 } 75}; 76 77static unsigned int qnap_ts41x_mpp_config[] __initdata = { 78 MPP0_SPI_SCn, 79 MPP1_SPI_MOSI, 80 MPP2_SPI_SCK, 81 MPP3_SPI_MISO, 82 MPP6_SYSRST_OUTn, 83 MPP7_PEX_RST_OUTn, 84 MPP8_TW0_SDA, 85 MPP9_TW0_SCK, 86 MPP10_UART0_TXD, 87 MPP11_UART0_RXD, 88 MPP13_UART1_TXD, /* PIC controller */ 89 MPP14_UART1_RXD, /* PIC controller */ 90 MPP15_SATA0_ACTn, 91 MPP16_SATA1_ACTn, 92 MPP20_GE1_TXD0, 93 MPP21_GE1_TXD1, 94 MPP22_GE1_TXD2, 95 MPP23_GE1_TXD3, 96 MPP24_GE1_RXD0, 97 MPP25_GE1_RXD1, 98 MPP26_GE1_RXD2, 99 MPP27_GE1_RXD3, 100 MPP30_GE1_RXCTL, 101 MPP31_GE1_RXCLK, 102 MPP32_GE1_TCLKOUT, 103 MPP33_GE1_TXCTL, 104 MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ 105 MPP37_GPIO, /* Reset button */ 106 MPP43_GPIO, /* USB Copy button */ 107 MPP44_GPIO, /* Board ID: 0: TS-419U, 1: TS-419 */ 108 MPP45_GPIO, /* JP1: 0: LCD, 1: serial console */ 109 MPP46_GPIO, /* External SATA HDD1 error indicator */ 110 MPP47_GPIO, /* External SATA HDD2 error indicator */ 111 MPP48_GPIO, /* External SATA HDD3 error indicator */ 112 MPP49_GPIO, /* External SATA HDD4 error indicator */ 113 0 114}; 115 116static void __init qnap_ts41x_init(void) 117{ 118 /* 119 * Basic setup. Needs to be called early. 120 */ 121 kirkwood_init(); 122 kirkwood_mpp_conf(qnap_ts41x_mpp_config); 123 124 kirkwood_uart0_init(); 125 kirkwood_uart1_init(); /* A PIC controller is connected here. */ 126 qnap_tsx1x_register_flash(); 127 kirkwood_i2c_init(); 128 i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1); 129 kirkwood_ge00_init(&qnap_ts41x_ge00_data); 130 kirkwood_ge01_init(&qnap_ts41x_ge01_data); 131 kirkwood_sata_init(&qnap_ts41x_sata_data); 132 kirkwood_ehci_init(); 133 platform_device_register(&qnap_ts41x_button_device); 134 135 pm_power_off = qnap_tsx1x_power_off; 136 137 if (gpio_request(QNAP_TS41X_JUMPER_JP1, "JP1") == 0) 138 gpio_export(QNAP_TS41X_JUMPER_JP1, 0); 139} 140 141static int __init ts41x_pci_init(void) 142{ 143 if (machine_is_ts41x()) 144 kirkwood_pcie_init(KW_PCIE0); 145 146 return 0; 147} 148subsys_initcall(ts41x_pci_init); 149 150MACHINE_START(TS41X, "QNAP TS-41x") 151 /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ 152 .phys_io = KIRKWOOD_REGS_PHYS_BASE, 153 .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, 154 .boot_params = 0x00000100, 155 .init_machine = qnap_ts41x_init, 156 .map_io = kirkwood_map_io, 157 .init_irq = kirkwood_init_irq, 158 .timer = &kirkwood_timer, 159MACHINE_END 160