1/* 2 * arch/arm/mach-at91/include/mach/at91rm9200_emac.h 3 * 4 * Copyright (C) 2005 Ivan Kokshaysky 5 * Copyright (C) SAN People 6 * 7 * Ethernet MAC registers. 8 * Based on AT91RM9200 datasheet revision E. 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 */ 15 16#ifndef AT91RM9200_EMAC_H 17#define AT91RM9200_EMAC_H 18 19#define AT91_EMAC_CTL 0x00 /* Control Register */ 20#define AT91_EMAC_LB (1 << 0) /* Loopback */ 21#define AT91_EMAC_LBL (1 << 1) /* Loopback Local */ 22#define AT91_EMAC_RE (1 << 2) /* Receive Enable */ 23#define AT91_EMAC_TE (1 << 3) /* Transmit Enable */ 24#define AT91_EMAC_MPE (1 << 4) /* Management Port Enable */ 25#define AT91_EMAC_CSR (1 << 5) /* Clear Statistics Registers */ 26#define AT91_EMAC_INCSTAT (1 << 6) /* Increment Statistics Registers */ 27#define AT91_EMAC_WES (1 << 7) /* Write Enable for Statistics Registers */ 28#define AT91_EMAC_BP (1 << 8) /* Back Pressure */ 29 30#define AT91_EMAC_CFG 0x04 /* Configuration Register */ 31#define AT91_EMAC_SPD (1 << 0) /* Speed */ 32#define AT91_EMAC_FD (1 << 1) /* Full Duplex */ 33#define AT91_EMAC_BR (1 << 2) /* Bit Rate */ 34#define AT91_EMAC_CAF (1 << 4) /* Copy All Frames */ 35#define AT91_EMAC_NBC (1 << 5) /* No Broadcast */ 36#define AT91_EMAC_MTI (1 << 6) /* Multicast Hash Enable */ 37#define AT91_EMAC_UNI (1 << 7) /* Unicast Hash Enable */ 38#define AT91_EMAC_BIG (1 << 8) /* Receive 1522 Bytes */ 39#define AT91_EMAC_EAE (1 << 9) /* External Address Match Enable */ 40#define AT91_EMAC_CLK (3 << 10) /* MDC Clock Divisor */ 41#define AT91_EMAC_CLK_DIV8 (0 << 10) 42#define AT91_EMAC_CLK_DIV16 (1 << 10) 43#define AT91_EMAC_CLK_DIV32 (2 << 10) 44#define AT91_EMAC_CLK_DIV64 (3 << 10) 45#define AT91_EMAC_RTY (1 << 12) /* Retry Test */ 46#define AT91_EMAC_RMII (1 << 13) /* Reduce MII (RMII) */ 47 48#define AT91_EMAC_SR 0x08 /* Status Register */ 49#define AT91_EMAC_SR_LINK (1 << 0) /* Link */ 50#define AT91_EMAC_SR_MDIO (1 << 1) /* MDIO pin */ 51#define AT91_EMAC_SR_IDLE (1 << 2) /* PHY idle */ 52 53#define AT91_EMAC_TAR 0x0c /* Transmit Address Register */ 54 55#define AT91_EMAC_TCR 0x10 /* Transmit Control Register */ 56#define AT91_EMAC_LEN (0x7ff << 0) /* Transmit Frame Length */ 57#define AT91_EMAC_NCRC (1 << 15) /* No CRC */ 58 59#define AT91_EMAC_TSR 0x14 /* Transmit Status Register */ 60#define AT91_EMAC_TSR_OVR (1 << 0) /* Transmit Buffer Overrun */ 61#define AT91_EMAC_TSR_COL (1 << 1) /* Collision Occurred */ 62#define AT91_EMAC_TSR_RLE (1 << 2) /* Retry Limit Exceeded */ 63#define AT91_EMAC_TSR_IDLE (1 << 3) /* Transmitter Idle */ 64#define AT91_EMAC_TSR_BNQ (1 << 4) /* Transmit Buffer not Queued */ 65#define AT91_EMAC_TSR_COMP (1 << 5) /* Transmit Complete */ 66#define AT91_EMAC_TSR_UND (1 << 6) /* Transmit Underrun */ 67 68#define AT91_EMAC_RBQP 0x18 /* Receive Buffer Queue Pointer */ 69 70#define AT91_EMAC_RSR 0x20 /* Receive Status Register */ 71#define AT91_EMAC_RSR_BNA (1 << 0) /* Buffer Not Available */ 72#define AT91_EMAC_RSR_REC (1 << 1) /* Frame Received */ 73#define AT91_EMAC_RSR_OVR (1 << 2) /* RX Overrun */ 74 75#define AT91_EMAC_ISR 0x24 /* Interrupt Status Register */ 76#define AT91_EMAC_DONE (1 << 0) /* Management Done */ 77#define AT91_EMAC_RCOM (1 << 1) /* Receive Complete */ 78#define AT91_EMAC_RBNA (1 << 2) /* Receive Buffer Not Available */ 79#define AT91_EMAC_TOVR (1 << 3) /* Transmit Buffer Overrun */ 80#define AT91_EMAC_TUND (1 << 4) /* Transmit Buffer Underrun */ 81#define AT91_EMAC_RTRY (1 << 5) /* Retry Limit */ 82#define AT91_EMAC_TBRE (1 << 6) /* Transmit Buffer Register Empty */ 83#define AT91_EMAC_TCOM (1 << 7) /* Transmit Complete */ 84#define AT91_EMAC_TIDLE (1 << 8) /* Transmit Idle */ 85#define AT91_EMAC_LINK (1 << 9) /* Link */ 86#define AT91_EMAC_ROVR (1 << 10) /* RX Overrun */ 87#define AT91_EMAC_ABT (1 << 11) /* Abort */ 88 89#define AT91_EMAC_IER 0x28 /* Interrupt Enable Register */ 90#define AT91_EMAC_IDR 0x2c /* Interrupt Disable Register */ 91#define AT91_EMAC_IMR 0x30 /* Interrupt Mask Register */ 92 93#define AT91_EMAC_MAN 0x34 /* PHY Maintenance Register */ 94#define AT91_EMAC_DATA (0xffff << 0) /* MDIO Data */ 95#define AT91_EMAC_REGA (0x1f << 18) /* MDIO Register */ 96#define AT91_EMAC_PHYA (0x1f << 23) /* MDIO PHY Address */ 97#define AT91_EMAC_RW (3 << 28) /* Read/Write operation */ 98#define AT91_EMAC_RW_W (1 << 28) 99#define AT91_EMAC_RW_R (2 << 28) 100#define AT91_EMAC_MAN_802_3 0x40020000 /* IEEE 802.3 value */ 101 102/* 103 * Statistics Registers. 104 */ 105#define AT91_EMAC_FRA 0x40 /* Frames Transmitted OK */ 106#define AT91_EMAC_SCOL 0x44 /* Single Collision Frame */ 107#define AT91_EMAC_MCOL 0x48 /* Multiple Collision Frame */ 108#define AT91_EMAC_OK 0x4c /* Frames Received OK */ 109#define AT91_EMAC_SEQE 0x50 /* Frame Check Sequence Error */ 110#define AT91_EMAC_ALE 0x54 /* Alignmemt Error */ 111#define AT91_EMAC_DTE 0x58 /* Deffered Transmission Frame */ 112#define AT91_EMAC_LCOL 0x5c /* Late Collision */ 113#define AT91_EMAC_ECOL 0x60 /* Excessive Collision */ 114#define AT91_EMAC_TUE 0x64 /* Transmit Underrun Error */ 115#define AT91_EMAC_CSE 0x68 /* Carrier Sense Error */ 116#define AT91_EMAC_DRFC 0x6c /* Discard RX Frame */ 117#define AT91_EMAC_ROV 0x70 /* Receive Overrun */ 118#define AT91_EMAC_CDE 0x74 /* Code Error */ 119#define AT91_EMAC_ELR 0x78 /* Excessive Length Error */ 120#define AT91_EMAC_RJB 0x7c /* Receive Jabber */ 121#define AT91_EMAC_USF 0x80 /* Undersize Frame */ 122#define AT91_EMAC_SQEE 0x84 /* SQE Test Error */ 123 124/* 125 * Address Registers. 126 */ 127#define AT91_EMAC_HSL 0x90 /* Hash Address Low [31:0] */ 128#define AT91_EMAC_HSH 0x94 /* Hash Address High [63:32] */ 129#define AT91_EMAC_SA1L 0x98 /* Specific Address 1 Low, bytes 0-3 */ 130#define AT91_EMAC_SA1H 0x9c /* Specific Address 1 High, bytes 4-5 */ 131#define AT91_EMAC_SA2L 0xa0 /* Specific Address 2 Low, bytes 0-3 */ 132#define AT91_EMAC_SA2H 0xa4 /* Specific Address 2 High, bytes 4-5 */ 133#define AT91_EMAC_SA3L 0xa8 /* Specific Address 3 Low, bytes 0-3 */ 134#define AT91_EMAC_SA3H 0xac /* Specific Address 3 High, bytes 4-5 */ 135#define AT91_EMAC_SA4L 0xb0 /* Specific Address 4 Low, bytes 0-3 */ 136#define AT91_EMAC_SA4H 0xb4 /* Specific Address 4 High, bytes 4-5 */ 137 138#endif 139