1# Makefile.in generated by automake 1.11.5 from Makefile.am. 2# etc/Makefile. Generated from Makefile.in by configure. 3 4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 5# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software 6# Foundation, Inc. 7# This Makefile.in is free software; the Free Software Foundation 8# gives unlimited permission to copy and/or distribute it, 9# with or without modifications, as long as this notice is preserved. 10 11# This program is distributed in the hope that it will be useful, 12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 14# PARTICULAR PURPOSE. 15 16 17 18# Makefile.am for etc/ 19 20am__make_dryrun = \ 21 { \ 22 am__dry=no; \ 23 case $$MAKEFLAGS in \ 24 *\\[\ \ ]*) \ 25 echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ 26 | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ 27 *) \ 28 for am__flg in $$MAKEFLAGS; do \ 29 case $$am__flg in \ 30 *=*|--*) ;; \ 31 *n*) am__dry=yes; break;; \ 32 esac; \ 33 done;; \ 34 esac; \ 35 test $$am__dry = yes; \ 36 } 37pkgdatadir = $(datadir)/netatalk 38pkgincludedir = $(includedir)/netatalk 39pkglibdir = $(libdir)/netatalk 40pkglibexecdir = $(libexecdir)/netatalk 41am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 42install_sh_DATA = $(install_sh) -c -m 644 43install_sh_PROGRAM = $(install_sh) -c 44install_sh_SCRIPT = $(install_sh) -c 45INSTALL_HEADER = $(INSTALL_DATA) 46transform = $(program_transform_name) 47NORMAL_INSTALL = : 48PRE_INSTALL = : 49POST_INSTALL = : 50NORMAL_UNINSTALL = : 51PRE_UNINSTALL = : 52POST_UNINSTALL = : 53#build_triplet = mipsel-uclibc-linux-gnu26 54#host_triplet = mipsel-uclibc-linux-gnu 55#target_triplet = mipsel-uclibc-linux-gnu26 56#am__append_1 = atalkd papd psf 57subdir = etc 58DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in 59ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 60am__aclocal_m4_deps = $(top_srcdir)/macros/afs-check.m4 \ 61 $(top_srcdir)/macros/cnid-backend.m4 \ 62 $(top_srcdir)/macros/config-checks.m4 \ 63 $(top_srcdir)/macros/cups.m4 $(top_srcdir)/macros/db3-check.m4 \ 64 $(top_srcdir)/macros/grep-check.m4 \ 65 $(top_srcdir)/macros/gssapi-check.m4 \ 66 $(top_srcdir)/macros/iconv.m4 \ 67 $(top_srcdir)/macros/largefile-check.m4 \ 68 $(top_srcdir)/macros/libgcrypt.m4 \ 69 $(top_srcdir)/macros/libtool.m4 \ 70 $(top_srcdir)/macros/ltoptions.m4 \ 71 $(top_srcdir)/macros/ltsugar.m4 \ 72 $(top_srcdir)/macros/ltversion.m4 \ 73 $(top_srcdir)/macros/lt~obsolete.m4 \ 74 $(top_srcdir)/macros/pam-check.m4 \ 75 $(top_srcdir)/macros/perl-check.m4 \ 76 $(top_srcdir)/macros/ps-check.m4 \ 77 $(top_srcdir)/macros/quota-check.m4 \ 78 $(top_srcdir)/macros/snprintf-check.m4 \ 79 $(top_srcdir)/macros/srvloc.m4 \ 80 $(top_srcdir)/macros/ssl-check.m4 \ 81 $(top_srcdir)/macros/summary.m4 \ 82 $(top_srcdir)/macros/tcp-wrappers.m4 \ 83 $(top_srcdir)/macros/util.m4 $(top_srcdir)/macros/webmin.m4 \ 84 $(top_srcdir)/macros/zeroconf.m4 $(top_srcdir)/configure.ac 85am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 86 $(ACLOCAL_M4) 87mkinstalldirs = $(install_sh) -d 88CONFIG_HEADER = $(top_builddir)/config.h 89CONFIG_CLEAN_FILES = 90CONFIG_CLEAN_VPATH_FILES = 91SOURCES = 92DIST_SOURCES = 93RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ 94 html-recursive info-recursive install-data-recursive \ 95 install-dvi-recursive install-exec-recursive \ 96 install-html-recursive install-info-recursive \ 97 install-pdf-recursive install-ps-recursive install-recursive \ 98 installcheck-recursive installdirs-recursive pdf-recursive \ 99 ps-recursive uninstall-recursive 100am__can_run_installinfo = \ 101 case $$AM_UPDATE_INFO_DIR in \ 102 n|no|NO) false;; \ 103 *) (install-info --version) >/dev/null 2>&1;; \ 104 esac 105RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 106 distclean-recursive maintainer-clean-recursive 107AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ 108 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ 109 distdir 110ETAGS = etags 111CTAGS = ctags 112DIST_SUBDIRS = afpd cnid_dbd uams atalkd papd psf 113DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 114am__relativize = \ 115 dir0=`pwd`; \ 116 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 117 sed_rest='s,^[^/]*/*,,'; \ 118 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 119 sed_butlast='s,/*[^/]*$$,,'; \ 120 while test -n "$$dir1"; do \ 121 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 122 if test "$$first" != "."; then \ 123 if test "$$first" = ".."; then \ 124 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 125 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 126 else \ 127 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 128 if test "$$first2" = "$$first"; then \ 129 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 130 else \ 131 dir2="../$$dir2"; \ 132 fi; \ 133 dir0="$$dir0"/"$$first"; \ 134 fi; \ 135 fi; \ 136 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 137 done; \ 138 reldir="$$dir2" 139ACLOCAL = ${SHELL} ${TIMEMACHINE_PATH}/netatalk-2.2.5/missing --run aclocal-1.11 140ACL_LIBS = 141AFS_CFLAGS = 142AFS_LIBS = 143AMTAR = $${TAR-tar} 144#AR = mipsel-linux-linux26-ar 145AUTOCONF = ${SHELL} ${TIMEMACHINE_PATH}/netatalk-2.2.5/missing --run autoconf 146AUTOHEADER = ${SHELL} ${TIMEMACHINE_PATH}/netatalk-2.2.5/missing --run autoheader 147AUTOMAKE = ${SHELL} ${TIMEMACHINE_PATH}/netatalk-2.2.5/missing --run automake-1.10 148AVAHI_CFLAGS = 149AVAHI_LIBS = 150AVAHI_TPOLL_CFLAGS = 151AVAHI_TPOLL_LIBS = 152AWK = gawk 153BDB_BIN = /usr/bin 154BDB_CFLAGS = 155BDB_LIBS = -ldb-4.7 156BDB_PATH = /usr 157#CC = mipsel-linux-uclibc-gcc 158CCDEPMODE = depmode=gcc3 159CFLAGS = -I$(top_srcdir)/include -D_U_="__attribute__((unused))" -g -O2 -I$(top_srcdir)/sys -I${TIMEMACHINE_PATH}/build/usr/include 160COMPILE_64BIT_KMODULE = 161COMPILE_KERNEL_GCC = 162#CPP = mipsel-linux-uclibc-gcc -E 163CPPFLAGS = 164CRYPT_LIBS = -lcrypt 165CUPS_CFLAGS = 166CUPS_CONFIG = 167CUPS_LDFLAGS = 168CUPS_LIBS = 169CYGPATH_W = echo 170DEFAULT_CNID_SCHEME = dbd 171DEFS = -DHAVE_CONFIG_H 172DEPDIR = .deps 173DLLTOOL = false 174DSYMUTIL = 175DUMPBIN = : 176ECHO_C = 177ECHO_N = -n 178ECHO_T = 179EGREP = /bin/grep -E 180EXEEXT = 181FGREP = /bin/grep -F 182GREP = /bin/grep 183GSSAPI_CFLAGS = 184GSSAPI_LDFLAGS = 185GSSAPI_LIBS = 186ICONV_CFLAGS = 187ICONV_LIBS = 188INSTALL = /usr/bin/install -c 189INSTALL_DATA = ${INSTALL} -m 644 190INSTALL_PROGRAM = ${INSTALL} 191INSTALL_SCRIPT = ${INSTALL} 192INSTALL_STRIP_PROGRAM = $(install_sh) -c -s 193KCFLAGS = 194KLDFLAGS = 195KRB5_CONFIG = 196#LD = /projects/hnd/tools/linux/hndtools-arm-linux-2.6.36-uclibc-4.5.3/arm-brcm-linux-uclibcgnueabi/bin/ld 197LDFLAGS = 198LIBADD_DL = -ldl 199LIBADD_DLD_LINK = 200LIBADD_DLOPEN = -ldl 201LIBADD_SHL_LOAD = 202LIBGCRYPT_CFLAGS = 203LIBGCRYPT_CONFIG = /usr/bin/libgcrypt-config 204LIBGCRYPT_LIBS = -lgcrypt -lgpg-error 205LIBOBJS = ${LIBOBJDIR}memcmp$U.o 206LIBS = -lpthread -ldl -L$(top_srcdir)/libatalk 207LIBTOOL = $(SHELL) $(top_builddir)/libtool 208LIPO = 209LN_S = ln -s 210LTLIBOBJS = ${LIBOBJDIR}memcmp$U.lo 211LT_DLLOADERS = dlopen.la 212LT_DLPREOPEN = -dlpreopen dlopen.la 213MAINT = 214MAKEINFO = ${SHELL} ${TIMEMACHINE_PATH}/netatalk-2.2.5/missing --run makeinfo 215MANIFEST_TOOL = : 216MKDIR_P = /bin/mkdir -p 217NETATALK_VERSION = 2.2.5 218NM = nm 219NMEDIT = 220OBJDUMP = objdump 221OBJEXT = o 222OTOOL = 223OTOOL64 = 224OVERWRITE_CONFIG = no 225PACKAGE = netatalk 226PACKAGE_BUGREPORT = 227PACKAGE_NAME = 228PACKAGE_STRING = 229PACKAGE_TARNAME = 230PACKAGE_URL = 231PACKAGE_VERSION = 232PAMDIR = / 233PAM_ACCOUNT = system-auth 234PAM_AUTH = system-auth 235PAM_CFLAGS = 236PAM_DIRECTIVE = include 237PAM_LIBS = 238PAM_PASSWORD = system-auth 239PAM_SESSION = system-auth 240PATH_SEPARATOR = : 241PERL = /usr/bin/perl 242PKGCONFDIR = ${prefix}/etc/netatalk 243PKG_CONFIG = /usr/bin/pkg-config 244PS = /bin/ps 245PTHREAD_LIBS = -lpthread 246QUOTA_LIBS = 247#RANLIB = mipsel-linux-linux26-ranlib 248SED = /bin/sed 249SERVERTEXT = ${prefix}/etc/netatalk/msg 250SET_MAKE = 251SHELL = /bin/sh 252SLP_CFLAGS = 253SLP_LIBS = 254SPOOLDIR = ${prefix}/var/spool/netatalk 255SSL_CFLAGS = -I${PKG_INSTALL_DIR}/usr/include -I${PKG_INSTALL_DIR}/usr/include/openssl 256SSL_LIBS = -L${PKG_INSTALL_DIR}/usr/lib -L${PKG_INSTALL_DIR}/usr -lcrypto 257#STRIP = mipsel-linux-linux26-strip 258UAMS_PATH = ${prefix}/etc/netatalk/uams 259VERSION = 2.2.5 260WEBMIN_PASS = 261WEBMIN_PATH = 262WEBMIN_PORT = 263WEBMIN_USER = 264WEBMIN_VERSION = 265WRAP_LIBS = 266ZEROCONF_CFLAGS = 267ZEROCONF_LIBS = 268abs_builddir = ${TIMEMACHINE_PATH}/netatalk-2.2.5/etc 269abs_srcdir = ${TIMEMACHINE_PATH}/netatalk-2.2.5/etc 270abs_top_builddir = ${TIMEMACHINE_PATH}/netatalk-2.2.5 271abs_top_srcdir = ${TIMEMACHINE_PATH}/netatalk-2.2.5 272ac_ct_CC = 273ac_ct_DUMPBIN = link -dump 274am__include = include 275am__leading_dot = . 276am__quote = 277am__tar = $${TAR-tar} chof - "$$tardir" 278am__untar = $${TAR-tar} xf - 279bindir = ${exec_prefix}/bin 280#build = mipsel-uclibc-linux-gnu26 281#build_alias = mipsel-uclibc-linux-gnu26 282#build_cpu = mipsel 283build_os = linux-gnu26 284build_vendor = uclibc 285builddir = . 286compiled_backends = dbd last tdb 287datadir = ${datarootdir} 288datarootdir = ${prefix}/share 289docdir = ${datarootdir}/doc/${PACKAGE} 290dvidir = ${docdir} 291exec_prefix = ${prefix} 292#host = mipsel-uclibc-linux-gnu 293#host_alias = mipsel-uclibc-linux 294#host_cpu = mipsel 295host_os = linux-gnu 296host_vendor = unknown 297htmldir = ${docdir} 298includedir = ${prefix}/include 299infodir = ${datarootdir}/info 300install_sh = $(SHELL) ${TIMEMACHINE_PATH}/netatalk-2.2.5/install-sh 301libdir = ${exec_prefix}/lib 302libexecdir = ${exec_prefix}/libexec 303localedir = ${datarootdir}/locale 304localstatedir = ${prefix}/var 305mandir = ${datarootdir}/man 306mkdir_p = /bin/mkdir -p 307oldincludedir = /usr/include 308pdfdir = ${docdir} 309prefix = /usr/local 310program_transform_name = s,x,x, 311psdir = ${docdir} 312sbindir = ${exec_prefix}/sbin 313sharedstatedir = ${prefix}/com 314srcdir = . 315sys_symbol_underscore = no 316sysconfdir = ${prefix}/etc 317#target = mipsel-uclibc-linux-gnu26 318#target_alias = mipsel-uclibc-linux-gnu26 319#target_cpu = mipsel 320target_os = linux-gnu26 321target_vendor = uclibc 322top_build_prefix = ../ 323top_builddir = .. 324top_srcdir = .. 325SUBDIRS = afpd cnid_dbd uams $(am__append_1) 326all: all-recursive 327 328.SUFFIXES: 329$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps) 330 @for dep in $?; do \ 331 case '$(am__configure_deps)' in \ 332 *$$dep*) \ 333 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ 334 && exit 0; \ 335 exit 1;; \ 336 esac; \ 337 done; \ 338 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign etc/Makefile'; \ 339 $(am__cd) $(top_srcdir) && \ 340 $(AUTOMAKE) --foreign etc/Makefile 341.PRECIOUS: Makefile 342Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 343 @case '$?' in \ 344 *config.status*) \ 345 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ 346 *) \ 347 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ 348 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ 349 esac; 350 351$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 352 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 353 354$(top_srcdir)/configure: # $(am__configure_deps) 355 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 356$(ACLOCAL_M4): # $(am__aclocal_m4_deps) 357 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 358$(am__aclocal_m4_deps): 359 360mostlyclean-libtool: 361 -rm -f *.lo 362 363clean-libtool: 364 -rm -rf .libs _libs 365 366# This directory's subdirectories are mostly independent; you can cd 367# into them and run `make' without going through this Makefile. 368# To change the values of `make' variables: instead of editing Makefiles, 369# (1) if the variable is set in `config.status', edit `config.status' 370# (which will cause the Makefiles to be regenerated when you run `make'); 371# (2) otherwise, pass the desired values on the `make' command line. 372$(RECURSIVE_TARGETS): 373 @fail= failcom='exit 1'; \ 374 for f in x $$MAKEFLAGS; do \ 375 case $$f in \ 376 *=* | --[!k]*);; \ 377 *k*) failcom='fail=yes';; \ 378 esac; \ 379 done; \ 380 dot_seen=no; \ 381 target=`echo $@ | sed s/-recursive//`; \ 382 list='$(SUBDIRS)'; for subdir in $$list; do \ 383 echo "Making $$target in $$subdir"; \ 384 if test "$$subdir" = "."; then \ 385 dot_seen=yes; \ 386 local_target="$$target-am"; \ 387 else \ 388 local_target="$$target"; \ 389 fi; \ 390 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 391 || eval $$failcom; \ 392 done; \ 393 if test "$$dot_seen" = "no"; then \ 394 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 395 fi; test -z "$$fail" 396 397$(RECURSIVE_CLEAN_TARGETS): 398 @fail= failcom='exit 1'; \ 399 for f in x $$MAKEFLAGS; do \ 400 case $$f in \ 401 *=* | --[!k]*);; \ 402 *k*) failcom='fail=yes';; \ 403 esac; \ 404 done; \ 405 dot_seen=no; \ 406 case "$@" in \ 407 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 408 *) list='$(SUBDIRS)' ;; \ 409 esac; \ 410 rev=''; for subdir in $$list; do \ 411 if test "$$subdir" = "."; then :; else \ 412 rev="$$subdir $$rev"; \ 413 fi; \ 414 done; \ 415 rev="$$rev ."; \ 416 target=`echo $@ | sed s/-recursive//`; \ 417 for subdir in $$rev; do \ 418 echo "Making $$target in $$subdir"; \ 419 if test "$$subdir" = "."; then \ 420 local_target="$$target-am"; \ 421 else \ 422 local_target="$$target"; \ 423 fi; \ 424 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 425 || eval $$failcom; \ 426 done && test -z "$$fail" 427tags-recursive: 428 list='$(SUBDIRS)'; for subdir in $$list; do \ 429 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ 430 done 431ctags-recursive: 432 list='$(SUBDIRS)'; for subdir in $$list; do \ 433 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ 434 done 435 436ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) 437 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 438 unique=`for i in $$list; do \ 439 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 440 done | \ 441 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 442 END { if (nonempty) { for (i in files) print i; }; }'`; \ 443 mkid -fID $$unique 444tags: TAGS 445 446TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ 447 $(TAGS_FILES) $(LISP) 448 set x; \ 449 here=`pwd`; \ 450 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 451 include_option=--etags-include; \ 452 empty_fix=.; \ 453 else \ 454 include_option=--include; \ 455 empty_fix=; \ 456 fi; \ 457 list='$(SUBDIRS)'; for subdir in $$list; do \ 458 if test "$$subdir" = .; then :; else \ 459 test ! -f $$subdir/TAGS || \ 460 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 461 fi; \ 462 done; \ 463 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 464 unique=`for i in $$list; do \ 465 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 466 done | \ 467 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 468 END { if (nonempty) { for (i in files) print i; }; }'`; \ 469 shift; \ 470 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 471 test -n "$$unique" || unique=$$empty_fix; \ 472 if test $$# -gt 0; then \ 473 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 474 "$$@" $$unique; \ 475 else \ 476 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 477 $$unique; \ 478 fi; \ 479 fi 480ctags: CTAGS 481CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ 482 $(TAGS_FILES) $(LISP) 483 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 484 unique=`for i in $$list; do \ 485 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 486 done | \ 487 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 488 END { if (nonempty) { for (i in files) print i; }; }'`; \ 489 test -z "$(CTAGS_ARGS)$$unique" \ 490 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 491 $$unique 492 493GTAGS: 494 here=`$(am__cd) $(top_builddir) && pwd` \ 495 && $(am__cd) $(top_srcdir) \ 496 && gtags -i $(GTAGS_ARGS) "$$here" 497 498distclean-tags: 499 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 500 501distdir: $(DISTFILES) 502 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 503 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 504 list='$(DISTFILES)'; \ 505 dist_files=`for file in $$list; do echo $$file; done | \ 506 sed -e "s|^$$srcdirstrip/||;t" \ 507 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 508 case $$dist_files in \ 509 */*) $(MKDIR_P) `echo "$$dist_files" | \ 510 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 511 sort -u` ;; \ 512 esac; \ 513 for file in $$dist_files; do \ 514 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 515 if test -d $$d/$$file; then \ 516 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 517 if test -d "$(distdir)/$$file"; then \ 518 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 519 fi; \ 520 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 521 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 522 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 523 fi; \ 524 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 525 else \ 526 test -f "$(distdir)/$$file" \ 527 || cp -p $$d/$$file "$(distdir)/$$file" \ 528 || exit 1; \ 529 fi; \ 530 done 531 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 532 if test "$$subdir" = .; then :; else \ 533 $(am__make_dryrun) \ 534 || test -d "$(distdir)/$$subdir" \ 535 || $(MKDIR_P) "$(distdir)/$$subdir" \ 536 || exit 1; \ 537 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 538 $(am__relativize); \ 539 new_distdir=$$reldir; \ 540 dir1=$$subdir; dir2="$(top_distdir)"; \ 541 $(am__relativize); \ 542 new_top_distdir=$$reldir; \ 543 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 544 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 545 ($(am__cd) $$subdir && \ 546 $(MAKE) $(AM_MAKEFLAGS) \ 547 top_distdir="$$new_top_distdir" \ 548 distdir="$$new_distdir" \ 549 am__remove_distdir=: \ 550 am__skip_length_check=: \ 551 am__skip_mode_fix=: \ 552 distdir) \ 553 || exit 1; \ 554 fi; \ 555 done 556check-am: all-am 557check: check-recursive 558all-am: Makefile 559installdirs: installdirs-recursive 560installdirs-am: 561install: install-recursive 562install-exec: install-exec-recursive 563install-data: install-data-recursive 564uninstall: uninstall-recursive 565 566install-am: all-am 567 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 568 569installcheck: installcheck-recursive 570install-strip: 571 if test -z '$(STRIP)'; then \ 572 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 573 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 574 install; \ 575 else \ 576 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 577 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 578 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 579 fi 580mostlyclean-generic: 581 582clean-generic: 583 584distclean-generic: 585 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 586 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 587 588maintainer-clean-generic: 589 @echo "This command is intended for maintainers to use" 590 @echo "it deletes files that may require special tools to rebuild." 591clean: clean-recursive 592 593clean-am: clean-generic clean-libtool mostlyclean-am 594 595distclean: distclean-recursive 596 -rm -f Makefile 597distclean-am: clean-am distclean-generic distclean-tags 598 599dvi: dvi-recursive 600 601dvi-am: 602 603html: html-recursive 604 605html-am: 606 607info: info-recursive 608 609info-am: 610 611install-data-am: 612 613install-dvi: install-dvi-recursive 614 615install-dvi-am: 616 617install-exec-am: 618 619install-html: install-html-recursive 620 621install-html-am: 622 623install-info: install-info-recursive 624 625install-info-am: 626 627install-man: 628 629install-pdf: install-pdf-recursive 630 631install-pdf-am: 632 633install-ps: install-ps-recursive 634 635install-ps-am: 636 637installcheck-am: 638 639maintainer-clean: maintainer-clean-recursive 640 -rm -f Makefile 641maintainer-clean-am: distclean-am maintainer-clean-generic 642 643mostlyclean: mostlyclean-recursive 644 645mostlyclean-am: mostlyclean-generic mostlyclean-libtool 646 647pdf: pdf-recursive 648 649pdf-am: 650 651ps: ps-recursive 652 653ps-am: 654 655uninstall-am: 656 657.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ 658 install-am install-strip tags-recursive 659 660.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ 661 all all-am check check-am clean clean-generic clean-libtool \ 662 ctags ctags-recursive distclean distclean-generic \ 663 distclean-libtool distclean-tags distdir dvi dvi-am html \ 664 html-am info info-am install install-am install-data \ 665 install-data-am install-dvi install-dvi-am install-exec \ 666 install-exec-am install-html install-html-am install-info \ 667 install-info-am install-man install-pdf install-pdf-am \ 668 install-ps install-ps-am install-strip installcheck \ 669 installcheck-am installdirs installdirs-am maintainer-clean \ 670 maintainer-clean-generic mostlyclean mostlyclean-generic \ 671 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ 672 uninstall uninstall-am 673 674 675# Tell versions [3.59,3.63) of GNU make to not export all variables. 676# Otherwise a system limit (for SysV at least) may be exceeded. 677.NOEXPORT: 678