1# Makefile.in generated by automake 1.11.6 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 5# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software 6# Foundation, Inc. 7# This Makefile.in is free software; the Free Software Foundation 8# gives unlimited permission to copy and/or distribute it, 9# with or without modifications, as long as this notice is preserved. 10 11# This program is distributed in the hope that it will be useful, 12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 14# PARTICULAR PURPOSE. 15 16@SET_MAKE@ 17 18# 19# OpenVPN -- An application to securely tunnel IP networks 20# over a single UDP port, with support for SSL/TLS-based 21# session authentication and key exchange, 22# packet encryption, packet authentication, and 23# packet compression. 24# 25# Copyright (C) 2002-2010 OpenVPN Technologies, Inc. <sales@openvpn.net> 26# Copyright (C) 2010 David Sommerseth <dazo@users.sourceforge.net> 27# Copyright (C) 2006-2012 Alon Bar-Lev <alon.barlev@gmail.com> 28# 29# This program is free software; you can redistribute it and/or modify 30# it under the terms of the GNU General Public License version 2 31# as published by the Free Software Foundation. 32# 33# This program is distributed in the hope that it will be useful, 34# but WITHOUT ANY WARRANTY; without even the implied warranty of 35# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 36# GNU General Public License for more details. 37# 38# You should have received a copy of the GNU General Public License 39# along with this program (see the file COPYING included with this 40# distribution); if not, write to the Free Software Foundation, Inc., 41# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 42# 43 44 45VPATH = @srcdir@ 46am__make_dryrun = \ 47 { \ 48 am__dry=no; \ 49 case $$MAKEFLAGS in \ 50 *\\[\ \ ]*) \ 51 echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ 52 | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ 53 *) \ 54 for am__flg in $$MAKEFLAGS; do \ 55 case $$am__flg in \ 56 *=*|--*) ;; \ 57 *n*) am__dry=yes; break;; \ 58 esac; \ 59 done;; \ 60 esac; \ 61 test $$am__dry = yes; \ 62 } 63pkgdatadir = $(datadir)/@PACKAGE@ 64pkgincludedir = $(includedir)/@PACKAGE@ 65pkglibdir = $(libdir)/@PACKAGE@ 66pkglibexecdir = $(libexecdir)/@PACKAGE@ 67am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 68install_sh_DATA = $(install_sh) -c -m 644 69install_sh_PROGRAM = $(install_sh) -c 70install_sh_SCRIPT = $(install_sh) -c 71INSTALL_HEADER = $(INSTALL_DATA) 72transform = $(program_transform_name) 73NORMAL_INSTALL = : 74PRE_INSTALL = : 75POST_INSTALL = : 76NORMAL_UNINSTALL = : 77PRE_UNINSTALL = : 78POST_UNINSTALL = : 79build_triplet = @build@ 80host_triplet = @host@ 81@WIN32_TRUE@am__append_1 = INSTALL-win32.txt 82@WIN32_FALSE@am__append_2 = INSTALL-win32.txt 83subdir = . 84DIST_COMMON = README $(am__configure_deps) $(am__dist_doc_DATA_DIST) \ 85 $(am__dist_noinst_DATA_DIST) $(dist_noinst_HEADERS) \ 86 $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ 87 $(srcdir)/config.h.in $(srcdir)/version.sh.in \ 88 $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ 89 config.guess config.sub depcomp install-sh ltmain.sh missing 90ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 91am__aclocal_m4_deps = $(top_srcdir)/m4/ax_emptyarray.m4 \ 92 $(top_srcdir)/m4/ax_socklen_t.m4 \ 93 $(top_srcdir)/m4/ax_varargs.m4 $(top_srcdir)/m4/libtool.m4 \ 94 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ 95 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ 96 $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/version.m4 \ 97 $(top_srcdir)/compat.m4 $(top_srcdir)/configure.ac 98am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 99 $(ACLOCAL_M4) 100am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 101 configure.lineno config.status.lineno 102mkinstalldirs = $(install_sh) -d 103CONFIG_HEADER = config.h 104CONFIG_CLEAN_FILES = version.sh 105CONFIG_CLEAN_VPATH_FILES = 106SOURCES = 107DIST_SOURCES = 108RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ 109 html-recursive info-recursive install-data-recursive \ 110 install-dvi-recursive install-exec-recursive \ 111 install-html-recursive install-info-recursive \ 112 install-pdf-recursive install-ps-recursive install-recursive \ 113 installcheck-recursive installdirs-recursive pdf-recursive \ 114 ps-recursive uninstall-recursive 115am__can_run_installinfo = \ 116 case $$AM_UPDATE_INFO_DIR in \ 117 n|no|NO) false;; \ 118 *) (install-info --version) >/dev/null 2>&1;; \ 119 esac 120am__dist_doc_DATA_DIST = README README.IPv6 README.polarssl \ 121 COPYRIGHT.GPL COPYING INSTALL-win32.txt 122am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 123am__vpath_adj = case $$p in \ 124 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 125 *) f=$$p;; \ 126 esac; 127am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; 128am__install_max = 40 129am__nobase_strip_setup = \ 130 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` 131am__nobase_strip = \ 132 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" 133am__nobase_list = $(am__nobase_strip_setup); \ 134 for p in $$list; do echo "$$p $$p"; done | \ 135 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ 136 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ 137 if (++n[$$2] == $(am__install_max)) \ 138 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ 139 END { for (dir in files) print dir, files[dir] }' 140am__base_list = \ 141 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ 142 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' 143am__uninstall_files_from_dir = { \ 144 test -z "$$files" \ 145 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ 146 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ 147 $(am__cd) "$$dir" && rm -f $$files; }; \ 148 } 149am__installdirs = "$(DESTDIR)$(docdir)" "$(DESTDIR)$(rootdir)" 150am__dist_noinst_DATA_DIST = .gitignore .gitattributes \ 151 config-version.h.in PORTS README.IPv6 TODO.IPv6 \ 152 README.polarssl openvpn.sln msvc-env.bat msvc-dev.bat \ 153 msvc-build.bat INSTALL-win32.txt 154DATA = $(dist_doc_DATA) $(dist_noinst_DATA) $(root_DATA) 155HEADERS = $(dist_noinst_HEADERS) 156RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 157 distclean-recursive maintainer-clean-recursive 158AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ 159 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ 160 distdir dist dist-all distcheck 161ETAGS = etags 162CTAGS = ctags 163DIST_SUBDIRS = $(SUBDIRS) 164DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 165distdir = $(PACKAGE)-$(VERSION) 166top_distdir = $(distdir) 167am__remove_distdir = \ 168 if test -d "$(distdir)"; then \ 169 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 170 && rm -rf "$(distdir)" \ 171 || { sleep 5 && rm -rf "$(distdir)"; }; \ 172 else :; fi 173am__relativize = \ 174 dir0=`pwd`; \ 175 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 176 sed_rest='s,^[^/]*/*,,'; \ 177 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 178 sed_butlast='s,/*[^/]*$$,,'; \ 179 while test -n "$$dir1"; do \ 180 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 181 if test "$$first" != "."; then \ 182 if test "$$first" = ".."; then \ 183 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 184 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 185 else \ 186 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 187 if test "$$first2" = "$$first"; then \ 188 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 189 else \ 190 dir2="../$$dir2"; \ 191 fi; \ 192 dir0="$$dir0"/"$$first"; \ 193 fi; \ 194 fi; \ 195 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 196 done; \ 197 reldir="$$dir2" 198DIST_ARCHIVES = $(distdir).tar.gz 199GZIP_ENV = --best 200distuninstallcheck_listfiles = find . -type f -print 201am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 202 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 203distcleancheck_listfiles = find . -type f -print 204ACLOCAL = @ACLOCAL@ 205AMTAR = @AMTAR@ 206AR = @AR@ 207AS = @AS@ 208AUTOCONF = @AUTOCONF@ 209AUTOHEADER = @AUTOHEADER@ 210AUTOMAKE = @AUTOMAKE@ 211AWK = @AWK@ 212CC = @CC@ 213CCDEPMODE = @CCDEPMODE@ 214CFLAGS = @CFLAGS@ 215CPP = @CPP@ 216CPPFLAGS = @CPPFLAGS@ 217CYGPATH_W = @CYGPATH_W@ 218DEFS = @DEFS@ 219DEPDIR = @DEPDIR@ 220DLLTOOL = @DLLTOOL@ 221DL_LIBS = @DL_LIBS@ 222DSYMUTIL = @DSYMUTIL@ 223DUMPBIN = @DUMPBIN@ 224ECHO_C = @ECHO_C@ 225ECHO_N = @ECHO_N@ 226ECHO_T = @ECHO_T@ 227EGREP = @EGREP@ 228EXEEXT = @EXEEXT@ 229FGREP = @FGREP@ 230GIT = @GIT@ 231GREP = @GREP@ 232IFCONFIG = @IFCONFIG@ 233INSTALL = @INSTALL@ 234INSTALL_DATA = @INSTALL_DATA@ 235INSTALL_PROGRAM = @INSTALL_PROGRAM@ 236INSTALL_SCRIPT = @INSTALL_SCRIPT@ 237INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 238IPROUTE = @IPROUTE@ 239LD = @LD@ 240LDFLAGS = @LDFLAGS@ 241LIBOBJS = @LIBOBJS@ 242LIBPAM_CFLAGS = @LIBPAM_CFLAGS@ 243LIBPAM_LIBS = @LIBPAM_LIBS@ 244LIBS = @LIBS@ 245LIBTOOL = @LIBTOOL@ 246LIPO = @LIPO@ 247LN_S = @LN_S@ 248LTLIBOBJS = @LTLIBOBJS@ 249LZO_CFLAGS = @LZO_CFLAGS@ 250LZO_LIBS = @LZO_LIBS@ 251MAKEINFO = @MAKEINFO@ 252MAN2HTML = @MAN2HTML@ 253MANIFEST_TOOL = @MANIFEST_TOOL@ 254MKDIR_P = @MKDIR_P@ 255NETSTAT = @NETSTAT@ 256NM = @NM@ 257NMEDIT = @NMEDIT@ 258OBJDUMP = @OBJDUMP@ 259OBJEXT = @OBJEXT@ 260OPENSSL_CRYPTO_CFLAGS = @OPENSSL_CRYPTO_CFLAGS@ 261OPENSSL_CRYPTO_LIBS = @OPENSSL_CRYPTO_LIBS@ 262OPENSSL_SSL_CFLAGS = @OPENSSL_SSL_CFLAGS@ 263OPENSSL_SSL_LIBS = @OPENSSL_SSL_LIBS@ 264OPTIONAL_CRYPTO_CFLAGS = @OPTIONAL_CRYPTO_CFLAGS@ 265OPTIONAL_CRYPTO_LIBS = @OPTIONAL_CRYPTO_LIBS@ 266OPTIONAL_DL_LIBS = @OPTIONAL_DL_LIBS@ 267OPTIONAL_LZO_CFLAGS = @OPTIONAL_LZO_CFLAGS@ 268OPTIONAL_LZO_LIBS = @OPTIONAL_LZO_LIBS@ 269OPTIONAL_PKCS11_HELPER_CFLAGS = @OPTIONAL_PKCS11_HELPER_CFLAGS@ 270OPTIONAL_PKCS11_HELPER_LIBS = @OPTIONAL_PKCS11_HELPER_LIBS@ 271OPTIONAL_SELINUX_LIBS = @OPTIONAL_SELINUX_LIBS@ 272OTOOL = @OTOOL@ 273OTOOL64 = @OTOOL64@ 274PACKAGE = @PACKAGE@ 275PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 276PACKAGE_NAME = @PACKAGE_NAME@ 277PACKAGE_STRING = @PACKAGE_STRING@ 278PACKAGE_TARNAME = @PACKAGE_TARNAME@ 279PACKAGE_URL = @PACKAGE_URL@ 280PACKAGE_VERSION = @PACKAGE_VERSION@ 281PATH_SEPARATOR = @PATH_SEPARATOR@ 282PKCS11_HELPER_CFLAGS = @PKCS11_HELPER_CFLAGS@ 283PKCS11_HELPER_LIBS = @PKCS11_HELPER_LIBS@ 284PKG_CONFIG = @PKG_CONFIG@ 285PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 286PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 287PLUGIN_AUTH_PAM_CFLAGS = @PLUGIN_AUTH_PAM_CFLAGS@ 288PLUGIN_AUTH_PAM_LIBS = @PLUGIN_AUTH_PAM_LIBS@ 289POLARSSL_CFLAGS = @POLARSSL_CFLAGS@ 290POLARSSL_LIBS = @POLARSSL_LIBS@ 291RANLIB = @RANLIB@ 292RC = @RC@ 293ROUTE = @ROUTE@ 294SED = @SED@ 295SELINUX_LIBS = @SELINUX_LIBS@ 296SET_MAKE = @SET_MAKE@ 297SHELL = @SHELL@ 298SOCKETS_LIBS = @SOCKETS_LIBS@ 299STRIP = @STRIP@ 300TAP_CFLAGS = @TAP_CFLAGS@ 301TAP_WIN_COMPONENT_ID = @TAP_WIN_COMPONENT_ID@ 302TAP_WIN_MIN_MAJOR = @TAP_WIN_MIN_MAJOR@ 303TAP_WIN_MIN_MINOR = @TAP_WIN_MIN_MINOR@ 304VERSION = @VERSION@ 305abs_builddir = @abs_builddir@ 306abs_srcdir = @abs_srcdir@ 307abs_top_builddir = @abs_top_builddir@ 308abs_top_srcdir = @abs_top_srcdir@ 309ac_ct_AR = @ac_ct_AR@ 310ac_ct_CC = @ac_ct_CC@ 311ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 312am__include = @am__include@ 313am__leading_dot = @am__leading_dot@ 314am__quote = @am__quote@ 315am__tar = @am__tar@ 316am__untar = @am__untar@ 317bindir = @bindir@ 318build = @build@ 319build_alias = @build_alias@ 320build_cpu = @build_cpu@ 321build_os = @build_os@ 322build_vendor = @build_vendor@ 323builddir = @builddir@ 324datadir = @datadir@ 325datarootdir = @datarootdir@ 326docdir = @docdir@ 327dvidir = @dvidir@ 328exec_prefix = @exec_prefix@ 329host = @host@ 330host_alias = @host_alias@ 331host_cpu = @host_cpu@ 332host_os = @host_os@ 333host_vendor = @host_vendor@ 334htmldir = @htmldir@ 335includedir = @includedir@ 336infodir = @infodir@ 337install_sh = @install_sh@ 338libdir = @libdir@ 339libexecdir = @libexecdir@ 340localedir = @localedir@ 341localstatedir = @localstatedir@ 342mandir = @mandir@ 343mkdir_p = @mkdir_p@ 344oldincludedir = @oldincludedir@ 345pdfdir = @pdfdir@ 346plugindir = @plugindir@ 347prefix = @prefix@ 348program_transform_name = @program_transform_name@ 349psdir = @psdir@ 350sampledir = @sampledir@ 351sbindir = @sbindir@ 352sharedstatedir = @sharedstatedir@ 353srcdir = @srcdir@ 354sysconfdir = @sysconfdir@ 355target_alias = @target_alias@ 356top_build_prefix = @top_build_prefix@ 357top_builddir = @top_builddir@ 358top_srcdir = @top_srcdir@ 359 360# This option prevents autoreconf from overriding our COPYING and 361# INSTALL targets: 362AUTOMAKE_OPTIONS = foreign 1.9 363ACLOCAL_AMFLAGS = -I m4 364MAINTAINERCLEANFILES = \ 365 config.log config.status \ 366 $(srcdir)/Makefile.in \ 367 $(srcdir)/config.h.in $(srcdir)/config.h.in~ $(srcdir)/configure \ 368 $(srcdir)/install-sh $(srcdir)/ltmain.sh $(srcdir)/missing \ 369 $(srcdir)/m4/libtool.m4 $(srcdir)/m4/lt~obsolete.m4 \ 370 $(srcdir)/m4/ltoptions.m4 $(srcdir)/m4/ltsugar.m4 \ 371 $(srcdir)/m4/ltversion.m4 \ 372 $(srcdir)/depcomp $(srcdir)/aclocal.m4 \ 373 $(srcdir)/config.guess $(srcdir)/config.sub 374 375CLEANFILES = \ 376 config-version.h 377 378EXTRA_DIST = \ 379 contrib \ 380 debug 381 382@GIT_CHECKOUT_TRUE@BUILT_SOURCES = \ 383@GIT_CHECKOUT_TRUE@ config-version.h 384 385SUBDIRS = build distro include src sample doc tests 386dist_doc_DATA = README README.IPv6 README.polarssl COPYRIGHT.GPL \ 387 COPYING $(am__append_1) 388dist_noinst_DATA = .gitignore .gitattributes config-version.h.in PORTS \ 389 README.IPv6 TODO.IPv6 README.polarssl openvpn.sln msvc-env.bat \ 390 msvc-dev.bat msvc-build.bat $(am__append_2) 391dist_noinst_HEADERS = \ 392 config-msvc.h \ 393 config-msvc-version.h.in 394 395@WIN32_TRUE@rootdir = $(prefix) 396@WIN32_TRUE@root_DATA = version.sh 397all: $(BUILT_SOURCES) config.h 398 $(MAKE) $(AM_MAKEFLAGS) all-recursive 399 400.SUFFIXES: 401am--refresh: Makefile 402 @: 403$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 404 @for dep in $?; do \ 405 case '$(am__configure_deps)' in \ 406 *$$dep*) \ 407 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 408 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 409 && exit 0; \ 410 exit 1;; \ 411 esac; \ 412 done; \ 413 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 414 $(am__cd) $(top_srcdir) && \ 415 $(AUTOMAKE) --foreign Makefile 416.PRECIOUS: Makefile 417Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 418 @case '$?' in \ 419 *config.status*) \ 420 echo ' $(SHELL) ./config.status'; \ 421 $(SHELL) ./config.status;; \ 422 *) \ 423 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 424 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 425 esac; 426 427$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 428 $(SHELL) ./config.status --recheck 429 430$(top_srcdir)/configure: $(am__configure_deps) 431 $(am__cd) $(srcdir) && $(AUTOCONF) 432$(ACLOCAL_M4): $(am__aclocal_m4_deps) 433 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 434$(am__aclocal_m4_deps): 435 436config.h: stamp-h1 437 @if test ! -f $@; then rm -f stamp-h1; else :; fi 438 @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi 439 440stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 441 @rm -f stamp-h1 442 cd $(top_builddir) && $(SHELL) ./config.status config.h 443$(srcdir)/config.h.in: $(am__configure_deps) 444 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 445 rm -f stamp-h1 446 touch $@ 447 448distclean-hdr: 449 -rm -f config.h stamp-h1 450version.sh: $(top_builddir)/config.status $(srcdir)/version.sh.in 451 cd $(top_builddir) && $(SHELL) ./config.status $@ 452 453mostlyclean-libtool: 454 -rm -f *.lo 455 456clean-libtool: 457 -rm -rf .libs _libs 458 459distclean-libtool: 460 -rm -f libtool config.lt 461install-dist_docDATA: $(dist_doc_DATA) 462 @$(NORMAL_INSTALL) 463 @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ 464 if test -n "$$list"; then \ 465 echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \ 466 $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \ 467 fi; \ 468 for p in $$list; do \ 469 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 470 echo "$$d$$p"; \ 471 done | $(am__base_list) | \ 472 while read files; do \ 473 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ 474 $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ 475 done 476 477uninstall-dist_docDATA: 478 @$(NORMAL_UNINSTALL) 479 @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ 480 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ 481 dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir) 482install-rootDATA: $(root_DATA) 483 @$(NORMAL_INSTALL) 484 @list='$(root_DATA)'; test -n "$(rootdir)" || list=; \ 485 if test -n "$$list"; then \ 486 echo " $(MKDIR_P) '$(DESTDIR)$(rootdir)'"; \ 487 $(MKDIR_P) "$(DESTDIR)$(rootdir)" || exit 1; \ 488 fi; \ 489 for p in $$list; do \ 490 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 491 echo "$$d$$p"; \ 492 done | $(am__base_list) | \ 493 while read files; do \ 494 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(rootdir)'"; \ 495 $(INSTALL_DATA) $$files "$(DESTDIR)$(rootdir)" || exit $$?; \ 496 done 497 498uninstall-rootDATA: 499 @$(NORMAL_UNINSTALL) 500 @list='$(root_DATA)'; test -n "$(rootdir)" || list=; \ 501 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ 502 dir='$(DESTDIR)$(rootdir)'; $(am__uninstall_files_from_dir) 503 504# This directory's subdirectories are mostly independent; you can cd 505# into them and run `make' without going through this Makefile. 506# To change the values of `make' variables: instead of editing Makefiles, 507# (1) if the variable is set in `config.status', edit `config.status' 508# (which will cause the Makefiles to be regenerated when you run `make'); 509# (2) otherwise, pass the desired values on the `make' command line. 510$(RECURSIVE_TARGETS): 511 @fail= failcom='exit 1'; \ 512 for f in x $$MAKEFLAGS; do \ 513 case $$f in \ 514 *=* | --[!k]*);; \ 515 *k*) failcom='fail=yes';; \ 516 esac; \ 517 done; \ 518 dot_seen=no; \ 519 target=`echo $@ | sed s/-recursive//`; \ 520 list='$(SUBDIRS)'; for subdir in $$list; do \ 521 echo "Making $$target in $$subdir"; \ 522 if test "$$subdir" = "."; then \ 523 dot_seen=yes; \ 524 local_target="$$target-am"; \ 525 else \ 526 local_target="$$target"; \ 527 fi; \ 528 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 529 || eval $$failcom; \ 530 done; \ 531 if test "$$dot_seen" = "no"; then \ 532 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 533 fi; test -z "$$fail" 534 535$(RECURSIVE_CLEAN_TARGETS): 536 @fail= failcom='exit 1'; \ 537 for f in x $$MAKEFLAGS; do \ 538 case $$f in \ 539 *=* | --[!k]*);; \ 540 *k*) failcom='fail=yes';; \ 541 esac; \ 542 done; \ 543 dot_seen=no; \ 544 case "$@" in \ 545 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 546 *) list='$(SUBDIRS)' ;; \ 547 esac; \ 548 rev=''; for subdir in $$list; do \ 549 if test "$$subdir" = "."; then :; else \ 550 rev="$$subdir $$rev"; \ 551 fi; \ 552 done; \ 553 rev="$$rev ."; \ 554 target=`echo $@ | sed s/-recursive//`; \ 555 for subdir in $$rev; do \ 556 echo "Making $$target in $$subdir"; \ 557 if test "$$subdir" = "."; then \ 558 local_target="$$target-am"; \ 559 else \ 560 local_target="$$target"; \ 561 fi; \ 562 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 563 || eval $$failcom; \ 564 done && test -z "$$fail" 565tags-recursive: 566 list='$(SUBDIRS)'; for subdir in $$list; do \ 567 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ 568 done 569ctags-recursive: 570 list='$(SUBDIRS)'; for subdir in $$list; do \ 571 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ 572 done 573 574ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) 575 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 576 unique=`for i in $$list; do \ 577 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 578 done | \ 579 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 580 END { if (nonempty) { for (i in files) print i; }; }'`; \ 581 mkid -fID $$unique 582tags: TAGS 583 584TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ 585 $(TAGS_FILES) $(LISP) 586 set x; \ 587 here=`pwd`; \ 588 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 589 include_option=--etags-include; \ 590 empty_fix=.; \ 591 else \ 592 include_option=--include; \ 593 empty_fix=; \ 594 fi; \ 595 list='$(SUBDIRS)'; for subdir in $$list; do \ 596 if test "$$subdir" = .; then :; else \ 597 test ! -f $$subdir/TAGS || \ 598 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 599 fi; \ 600 done; \ 601 list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ 602 unique=`for i in $$list; do \ 603 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 604 done | \ 605 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 606 END { if (nonempty) { for (i in files) print i; }; }'`; \ 607 shift; \ 608 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 609 test -n "$$unique" || unique=$$empty_fix; \ 610 if test $$# -gt 0; then \ 611 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 612 "$$@" $$unique; \ 613 else \ 614 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 615 $$unique; \ 616 fi; \ 617 fi 618ctags: CTAGS 619CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ 620 $(TAGS_FILES) $(LISP) 621 list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ 622 unique=`for i in $$list; do \ 623 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 624 done | \ 625 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 626 END { if (nonempty) { for (i in files) print i; }; }'`; \ 627 test -z "$(CTAGS_ARGS)$$unique" \ 628 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 629 $$unique 630 631GTAGS: 632 here=`$(am__cd) $(top_builddir) && pwd` \ 633 && $(am__cd) $(top_srcdir) \ 634 && gtags -i $(GTAGS_ARGS) "$$here" 635 636distclean-tags: 637 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 638 639distdir: $(DISTFILES) 640 $(am__remove_distdir) 641 test -d "$(distdir)" || mkdir "$(distdir)" 642 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 643 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 644 list='$(DISTFILES)'; \ 645 dist_files=`for file in $$list; do echo $$file; done | \ 646 sed -e "s|^$$srcdirstrip/||;t" \ 647 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 648 case $$dist_files in \ 649 */*) $(MKDIR_P) `echo "$$dist_files" | \ 650 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 651 sort -u` ;; \ 652 esac; \ 653 for file in $$dist_files; do \ 654 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 655 if test -d $$d/$$file; then \ 656 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 657 if test -d "$(distdir)/$$file"; then \ 658 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 659 fi; \ 660 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 661 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 662 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 663 fi; \ 664 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 665 else \ 666 test -f "$(distdir)/$$file" \ 667 || cp -p $$d/$$file "$(distdir)/$$file" \ 668 || exit 1; \ 669 fi; \ 670 done 671 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 672 if test "$$subdir" = .; then :; else \ 673 $(am__make_dryrun) \ 674 || test -d "$(distdir)/$$subdir" \ 675 || $(MKDIR_P) "$(distdir)/$$subdir" \ 676 || exit 1; \ 677 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 678 $(am__relativize); \ 679 new_distdir=$$reldir; \ 680 dir1=$$subdir; dir2="$(top_distdir)"; \ 681 $(am__relativize); \ 682 new_top_distdir=$$reldir; \ 683 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 684 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 685 ($(am__cd) $$subdir && \ 686 $(MAKE) $(AM_MAKEFLAGS) \ 687 top_distdir="$$new_top_distdir" \ 688 distdir="$$new_distdir" \ 689 am__remove_distdir=: \ 690 am__skip_length_check=: \ 691 am__skip_mode_fix=: \ 692 distdir) \ 693 || exit 1; \ 694 fi; \ 695 done 696 -test -n "$(am__skip_mode_fix)" \ 697 || find "$(distdir)" -type d ! -perm -755 \ 698 -exec chmod u+rwx,go+rx {} \; -o \ 699 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 700 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 701 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 702 || chmod -R a+r "$(distdir)" 703dist-gzip: distdir 704 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 705 $(am__remove_distdir) 706 707dist-bzip2: distdir 708 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 709 $(am__remove_distdir) 710 711dist-lzip: distdir 712 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 713 $(am__remove_distdir) 714 715dist-lzma: distdir 716 tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma 717 $(am__remove_distdir) 718 719dist-xz: distdir 720 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 721 $(am__remove_distdir) 722 723dist-tarZ: distdir 724 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 725 $(am__remove_distdir) 726 727dist-shar: distdir 728 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz 729 $(am__remove_distdir) 730 731dist-zip: distdir 732 -rm -f $(distdir).zip 733 zip -rq $(distdir).zip $(distdir) 734 $(am__remove_distdir) 735 736dist dist-all: distdir 737 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 738 $(am__remove_distdir) 739 740# This target untars the dist file and tries a VPATH configuration. Then 741# it guarantees that the distribution is self-contained by making another 742# tarfile. 743distcheck: dist 744 case '$(DIST_ARCHIVES)' in \ 745 *.tar.gz*) \ 746 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ 747 *.tar.bz2*) \ 748 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 749 *.tar.lzma*) \ 750 lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ 751 *.tar.lz*) \ 752 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 753 *.tar.xz*) \ 754 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 755 *.tar.Z*) \ 756 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 757 *.shar.gz*) \ 758 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ 759 *.zip*) \ 760 unzip $(distdir).zip ;;\ 761 esac 762 chmod -R a-w $(distdir); chmod u+w $(distdir) 763 mkdir $(distdir)/_build 764 mkdir $(distdir)/_inst 765 chmod a-w $(distdir) 766 test -d $(distdir)/_build || exit 0; \ 767 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 768 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 769 && am__cwd=`pwd` \ 770 && $(am__cd) $(distdir)/_build \ 771 && ../configure --srcdir=.. --prefix="$$dc_install_base" \ 772 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 773 $(DISTCHECK_CONFIGURE_FLAGS) \ 774 && $(MAKE) $(AM_MAKEFLAGS) \ 775 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 776 && $(MAKE) $(AM_MAKEFLAGS) check \ 777 && $(MAKE) $(AM_MAKEFLAGS) install \ 778 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 779 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 780 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 781 distuninstallcheck \ 782 && chmod -R a-w "$$dc_install_base" \ 783 && ({ \ 784 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 785 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 786 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 787 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 788 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 789 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 790 && rm -rf "$$dc_destdir" \ 791 && $(MAKE) $(AM_MAKEFLAGS) dist \ 792 && rm -rf $(DIST_ARCHIVES) \ 793 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 794 && cd "$$am__cwd" \ 795 || exit 1 796 $(am__remove_distdir) 797 @(echo "$(distdir) archives ready for distribution: "; \ 798 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 799 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 800distuninstallcheck: 801 @test -n '$(distuninstallcheck_dir)' || { \ 802 echo 'ERROR: trying to run $@ with an empty' \ 803 '$$(distuninstallcheck_dir)' >&2; \ 804 exit 1; \ 805 }; \ 806 $(am__cd) '$(distuninstallcheck_dir)' || { \ 807 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 808 exit 1; \ 809 }; \ 810 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 811 || { echo "ERROR: files left after uninstall:" ; \ 812 if test -n "$(DESTDIR)"; then \ 813 echo " (check DESTDIR support)"; \ 814 fi ; \ 815 $(distuninstallcheck_listfiles) ; \ 816 exit 1; } >&2 817distcleancheck: distclean 818 @if test '$(srcdir)' = . ; then \ 819 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 820 exit 1 ; \ 821 fi 822 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 823 || { echo "ERROR: files left in build directory after distclean:" ; \ 824 $(distcleancheck_listfiles) ; \ 825 exit 1; } >&2 826check-am: all-am 827check: $(BUILT_SOURCES) 828 $(MAKE) $(AM_MAKEFLAGS) check-recursive 829all-am: Makefile $(DATA) $(HEADERS) config.h 830installdirs: installdirs-recursive 831installdirs-am: 832 for dir in "$(DESTDIR)$(docdir)" "$(DESTDIR)$(rootdir)"; do \ 833 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 834 done 835 836put_foxconn_ca: 837 cp -rf foxconn_ca $(datarootdir) 838 839install: $(BUILT_SOURCES) put_foxconn_ca 840 $(MAKE) $(AM_MAKEFLAGS) install-recursive 841install-exec: install-exec-recursive 842install-data: install-data-recursive 843uninstall: uninstall-recursive 844 845install-am: all-am 846 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 847 848installcheck: installcheck-recursive 849install-strip: 850 if test -z '$(STRIP)'; then \ 851 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 852 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 853 install; \ 854 else \ 855 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 856 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 857 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 858 fi 859mostlyclean-generic: 860 861clean-generic: 862 -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) 863 864distclean-generic: 865 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 866 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 867 868maintainer-clean-generic: 869 @echo "This command is intended for maintainers to use" 870 @echo "it deletes files that may require special tools to rebuild." 871 -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) 872 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 873clean: clean-recursive 874 875clean-am: clean-generic clean-libtool mostlyclean-am 876 877distclean: distclean-recursive 878 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 879 -rm -f Makefile 880distclean-am: clean-am distclean-generic distclean-hdr \ 881 distclean-libtool distclean-tags 882 883dvi: dvi-recursive 884 885dvi-am: 886 887html: html-recursive 888 889html-am: 890 891info: info-recursive 892 893info-am: 894 895install-data-am: install-dist_docDATA install-rootDATA 896 897install-dvi: install-dvi-recursive 898 899install-dvi-am: 900 901install-exec-am: 902 903install-html: install-html-recursive 904 905install-html-am: 906 907install-info: install-info-recursive 908 909install-info-am: 910 911install-man: 912 913install-pdf: install-pdf-recursive 914 915install-pdf-am: 916 917install-ps: install-ps-recursive 918 919install-ps-am: 920 921installcheck-am: 922 923maintainer-clean: maintainer-clean-recursive 924 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 925 -rm -rf $(top_srcdir)/autom4te.cache 926 -rm -f Makefile 927maintainer-clean-am: distclean-am maintainer-clean-generic 928 929mostlyclean: mostlyclean-recursive 930 931mostlyclean-am: mostlyclean-generic mostlyclean-libtool 932 933pdf: pdf-recursive 934 935pdf-am: 936 937ps: ps-recursive 938 939ps-am: 940 941uninstall-am: uninstall-dist_docDATA uninstall-rootDATA 942 943.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \ 944 ctags-recursive install install-am install-strip \ 945 tags-recursive 946 947.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ 948 all all-am am--refresh check check-am clean clean-generic \ 949 clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ 950 dist-gzip dist-lzip dist-lzma dist-shar dist-tarZ dist-xz \ 951 dist-zip distcheck distclean distclean-generic distclean-hdr \ 952 distclean-libtool distclean-tags distcleancheck distdir \ 953 distuninstallcheck dvi dvi-am html html-am info info-am \ 954 install install-am install-data install-data-am \ 955 install-dist_docDATA install-dvi install-dvi-am install-exec \ 956 install-exec-am install-html install-html-am install-info \ 957 install-info-am install-man install-pdf install-pdf-am \ 958 install-ps install-ps-am install-rootDATA install-strip \ 959 installcheck installcheck-am installdirs installdirs-am \ 960 maintainer-clean maintainer-clean-generic mostlyclean \ 961 mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ 962 tags tags-recursive uninstall uninstall-am \ 963 uninstall-dist_docDATA uninstall-rootDATA 964 965 966.PHONY: config-version.h 967 968config-version.h: 969 @CONFIGURE_GIT_REVISION="`GIT_DIR=\"$(top_srcdir)/.git\" $(GIT) rev-parse --symbolic-full-name HEAD`/`GIT_DIR=\"$(top_srcdir)/.git\" $(GIT) rev-parse --short=16 HEAD`"; \ 970 $(SED) "s#@CONFIGURE_GIT_REVISION[@]#$${CONFIGURE_GIT_REVISION}#g" "$(srcdir)/config-version.h.in" > config-version.h.tmp 971 @if ! [ -f config-version.h ] || ! cmp -s config-version.h.tmp config-version.h; then \ 972 echo "replacing config-version.h"; \ 973 mv config-version.h.tmp config-version.h; \ 974 else \ 975 rm -f config-version.h.tmp; \ 976 fi 977 978# Tell versions [3.59,3.63) of GNU make to not export all variables. 979# Otherwise a system limit (for SysV at least) may be exceeded. 980.NOEXPORT: 981