1# Default debug level is 1. Values range from 0-2 with 0 being silent 2# All information goes to the syslog. 3#debuglevel 1 4 5# The user name you have for your BPA account 6username bigpond 7 8# Your BPA password 9password 12345 10 11# The default auth server is "sm-server" You can override this value, but 12# you would only do this if you have not set your default domain correctly 13# in your /etc/resolv.conf 14#authserver sm-server 15 16authserver 172.19.67.175 17 18# You can override the default domain if you have your 19# resolv.conf set to not include the BPA domains. 20#authdomain vic.bigpond.net.au 21 22# The loginprog will be executed whenever BPALogin connects successfully 23# you could have it run a script to start a firewall, etc. The first 24# parm to the program will be the port number 25#connectedprog /etc/rc.d/rc.masq 26#disconnectedprog /etc/rc.d/rc.masq 27 28# If you want to bind BPALogin to a specific address rather than all 29# sockets, you can do that here. 30#localaddress 0.0.0.0 31 32# You can now define the listen port instead of a random port 33# This will help with firewalls. 34localport 5050 35 36# Logging can be sent to syslog or stdout. 37#logging syslog 38 39# Set the minimum heartbeat interval. This can protect against 40# DoS attacks. 41minheartbeatinterval 2 42 43# Set the maximum heartbeat interval. Sometimes the DCE server will not 44# send a heartbeat for a long time (i.e. longer than seven minutes) but 45# the connection is still open. BPALogin will normally treat this as a 46# failed connection unless you raise the maximum interval. 47maxheartbeatinterval 20 48