1///////////////////////////////////////////////////////////////////////////// 2// Name: wx/os2/setup.h 3// Purpose: Configuration for the library 4// Author: Julian Smart 5// Modified by: 6// Created: 01/02/97 7// RCS-ID: $Id: setup0.h 51451 2008-01-29 23:11:55Z VZ $ 8// Copyright: (c) Julian Smart 9// Licence: wxWindows licence 10///////////////////////////////////////////////////////////////////////////// 11 12#ifndef _WX_SETUP_H_ 13#define _WX_SETUP_H_ 14 15/* --- start common options --- */ 16// ---------------------------------------------------------------------------- 17// global settings 18// ---------------------------------------------------------------------------- 19 20// define this to 0 when building wxBase library - this can also be done from 21// makefile/project file overriding the value here 22#ifndef wxUSE_GUI 23 #define wxUSE_GUI 1 24#endif // wxUSE_GUI 25 26// ---------------------------------------------------------------------------- 27// compatibility settings 28// ---------------------------------------------------------------------------- 29 30// This setting determines the compatibility with 2.4 API: set it to 1 to 31// enable it but please consider updating your code instead. 32// 33// Default is 0 34// 35// Recommended setting: 0 (please update your code) 36#define WXWIN_COMPATIBILITY_2_4 0 37 38// This setting determines the compatibility with 2.6 API: set it to 0 to 39// flag all cases of using deprecated functions. 40// 41// Default is 1 but please try building your code with 0 as the default will 42// change to 0 in the next version and the deprecated functions will disappear 43// in the version after it completely. 44// 45// Recommended setting: 0 (please update your code) 46#define WXWIN_COMPATIBILITY_2_6 1 47 48// MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when 49// default system font is used for wxWindow::GetCharWidth/Height() instead of 50// the current font. 51// 52// Default is 0 53// 54// Recommended setting: 0 55#define wxDIALOG_UNIT_COMPATIBILITY 0 56 57// ---------------------------------------------------------------------------- 58// debugging settings 59// ---------------------------------------------------------------------------- 60 61// Generic comment about debugging settings: they are very useful if you don't 62// use any other memory leak detection tools such as Purify/BoundsChecker, but 63// are probably redundant otherwise. Also, Visual C++ CRT has the same features 64// as wxWidgets memory debugging subsystem built in since version 5.0 and you 65// may prefer to use it instead of built in memory debugging code because it is 66// faster and more fool proof. 67// 68// Using VC++ CRT memory debugging is enabled by default in debug mode 69// (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0) 70// and if __NO_VC_CRTDBG__ is not defined. 71 72// If 1, enables wxDebugContext, for writing error messages to file, etc. If 73// __WXDEBUG__ is not defined, will still use the normal memory operators. 74// 75// Default is 0 76// 77// Recommended setting: 0 78#define wxUSE_DEBUG_CONTEXT 0 79 80// If 1, enables debugging versions of wxObject::new and wxObject::delete *IF* 81// __WXDEBUG__ is also defined. 82// 83// WARNING: this code may not work with all architectures, especially if 84// alignment is an issue. This switch is currently ignored for mingw / cygwin 85// 86// Default is 0 87// 88// Recommended setting: 1 if you are not using a memory debugging tool, else 0 89#define wxUSE_MEMORY_TRACING 0 90 91// In debug mode, cause new and delete to be redefined globally. 92// If this causes problems (e.g. link errors which is a common problem 93// especially if you use another library which also redefines the global new 94// and delete), set this to 0. 95// This switch is currently ignored for mingw / cygwin 96// 97// Default is 0 98// 99// Recommended setting: 0 100#define wxUSE_GLOBAL_MEMORY_OPERATORS 0 101 102// In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If 103// this causes problems (e.g. link errors), set this to 0. You may need to set 104// this to 0 if using templates (at least for VC++). This switch is currently 105// ignored for mingw / cygwin / CodeWarrior 106// 107// Default is 0 108// 109// Recommended setting: 0 110#define wxUSE_DEBUG_NEW_ALWAYS 0 111 112// wxHandleFatalExceptions() may be used to catch the program faults at run 113// time and, instead of terminating the program with a usual GPF message box, 114// call the user-defined wxApp::OnFatalException() function. If you set 115// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work. 116// 117// This setting is for Win32 only and can only be enabled if your compiler 118// supports Win32 structured exception handling (currently only VC++ does) 119// 120// Default is 1 121// 122// Recommended setting: 1 if your compiler supports it. 123#define wxUSE_ON_FATAL_EXCEPTION 1 124 125// Set this to 1 to be able to generate a human-readable (unlike 126// machine-readable minidump created by wxCrashReport::Generate()) stack back 127// trace when your program crashes using wxStackWalker 128// 129// Default is 1 if supported by the compiler. 130// 131// Recommended setting: 1, set to 0 if your programs never crash 132#define wxUSE_STACKWALKER 1 133 134// Set this to 1 to compile in wxDebugReport class which allows you to create 135// and optionally upload to your web site a debug report consisting of back 136// trace of the crash (if wxUSE_STACKWALKER == 1) and other information. 137// 138// Default is 1 if supported by the compiler. 139// 140// Recommended setting: 1, it is compiled into a separate library so there 141// is no overhead if you don't use it 142#define wxUSE_DEBUGREPORT 1 143 144// ---------------------------------------------------------------------------- 145// Unicode support 146// ---------------------------------------------------------------------------- 147 148// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be 149// defined as wchar_t, wxString will use Unicode internally. If you set this 150// to 1, you must use wxT() macro for all literal strings in the program. 151// 152// Unicode is currently only fully supported under Windows NT/2000/XP 153// (Windows 9x doesn't support it and the programs compiled in Unicode mode 154// will not run under 9x -- but see wxUSE_UNICODE_MSLU below). 155// 156// Default is 0 157// 158// Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP) 159#ifndef wxUSE_UNICODE 160 #define wxUSE_UNICODE 0 161#endif 162 163// Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without 164// compiling the program in Unicode mode. More precisely, it will be possible 165// to construct wxString from a wide (Unicode) string and convert any wxString 166// to Unicode. 167// 168// Default is 1 169// 170// Recommended setting: 1 171#define wxUSE_WCHAR_T 1 172 173// ---------------------------------------------------------------------------- 174// global features 175// ---------------------------------------------------------------------------- 176 177// Compile library in exception-safe mode? If set to 1, the library will try to 178// behave correctly in presence of exceptions (even though it still will not 179// use the exceptions itself) and notify the user code about any unhandled 180// exceptions. If set to 0, propagation of the exceptions through the library 181// code will lead to undefined behaviour -- but the code itself will be 182// slightly smaller and faster. 183// 184// Note that like wxUSE_THREADS this option is automatically set to 0 if 185// wxNO_EXCEPTIONS is defined. 186// 187// Default is 1 188// 189// Recommended setting: depends on whether you intend to use C++ exceptions 190// in your own code (1 if you do, 0 if you don't) 191#define wxUSE_EXCEPTIONS 1 192 193// Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI 194// 195// Default is 0 196// 197// Recommended setting: 0 (this is still work in progress...) 198#define wxUSE_EXTENDED_RTTI 0 199 200// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from 201// std::list<Foo*> and std::vector<Foo*>, with a compatibility interface, 202// and for wxHashMap to be implemented with templates. 203// 204// Default is 0 205// 206// Recommended setting: YMMV 207#define wxUSE_STL 0 208 209// Support for message/error logging. This includes wxLogXXX() functions and 210// wxLog and derived classes. Don't set this to 0 unless you really know what 211// you are doing. 212// 213// Default is 1 214// 215// Recommended setting: 1 (always) 216#define wxUSE_LOG 1 217 218// Recommended setting: 1 219#define wxUSE_LOGWINDOW 1 220 221// Recommended setting: 1 222#define wxUSE_LOGGUI 1 223 224// Recommended setting: 1 225#define wxUSE_LOG_DIALOG 1 226 227// Support for command line parsing using wxCmdLineParser class. 228// 229// Default is 1 230// 231// Recommended setting: 1 (can be set to 0 if you don't use the cmd line) 232#define wxUSE_CMDLINE_PARSER 1 233 234// Support for multithreaded applications: if 1, compile in thread classes 235// (thread.h) and make the library a bit more thread safe. Although thread 236// support is quite stable by now, you may still consider recompiling the 237// library without it if you have no use for it - this will result in a 238// somewhat smaller and faster operation. 239// 240// Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset 241// to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in 242// build/msw/config.* file this value will have no effect. 243// 244// Default is 1 245// 246// Recommended setting: 0 unless you do plan to develop MT applications 247#define wxUSE_THREADS 1 248 249// If enabled, compiles wxWidgets streams classes 250// 251// wx stream classes are used for image IO, process IO redirection, network 252// protocols implementation and much more and so disabling this results in a 253// lot of other functionality being lost. 254// 255// Default is 1 256// 257// Recommended setting: 1 as setting it to 0 disables many other things 258#define wxUSE_STREAMS 1 259 260// Use standard C++ streams if 1 instead of wx streams in some places. If 261// disabled (default), wx streams are used everywhere and wxWidgets doesn't 262// depend on the standard streams library. 263// 264// Notice that enabling this does not replace wx streams with std streams 265// everywhere, in a lot of places wx streams are used no matter what. 266// 267// Default is 0 268// 269// Recommended setting: 1 if you use the standard streams anyhow and so 270// dependency on the standard streams library is not a 271// problem 272#define wxUSE_STD_IOSTREAM 0 273 274// Enable conversion to standard C++ string if 1. 275// 276// Default is 1 for most compilers. 277// 278// Currently the Digital Mars and Watcom compilers come without standard C++ 279// library headers by default, wxUSE_STD_STRING can be set to 1 if you do have 280// them (e.g. from STLPort). 281// 282// VC++ 5.0 does include standard C++ library header, however they produce 283// many warnings that can't be turned off when compiled at warning level 4. 284#if defined(__DMC__) || defined(__WATCOMC__) \ 285 || (defined(_MSC_VER) && _MSC_VER < 1200) 286 #define wxUSE_STD_STRING 0 287#else 288 #define wxUSE_STD_STRING 1 289#endif 290 291// Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf. 292// Note that if the system's implementation does not support positional 293// parameters, setting this to 1 forces the use of the wxWidgets implementation 294// of wxVsnprintf. The standard vsnprintf() supports positional parameters on 295// many Unix systems but usually doesn't under Windows. 296// 297// Positional parameters are very useful when translating a program since using 298// them in formatting strings allow translators to correctly reorder the 299// translated sentences. 300// 301// Default is 1 302// 303// Recommended setting: 1 if you want to support multiple languages 304#define wxUSE_PRINTF_POS_PARAMS 1 305 306// ---------------------------------------------------------------------------- 307// non GUI features selection 308// ---------------------------------------------------------------------------- 309 310// Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit 311// integer which is implemented in terms of native 64 bit integers if any or 312// uses emulation otherwise. 313// 314// This class is required by wxDateTime and so you should enable it if you want 315// to use wxDateTime. For most modern platforms, it will use the native 64 bit 316// integers in which case (almost) all of its functions are inline and it 317// almost does not take any space, so there should be no reason to switch it 318// off. 319// 320// Recommended setting: 1 321#define wxUSE_LONGLONG 1 322 323// Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level 324// POSIX functions for file access, wxFFile uses ANSI C stdio.h functions. 325// 326// Default is 1 327// 328// Recommended setting: 1 (wxFile is highly recommended as it is required by 329// i18n code, wxFileConfig and others) 330#define wxUSE_FILE 1 331#define wxUSE_FFILE 1 332 333// Use wxFSVolume class providing access to the configured/active mount points 334// 335// Default is 1 336// 337// Recommended setting: 1 (but may be safely disabled if you don't use it) 338#define wxUSE_FSVOLUME 1 339 340// Use wxStandardPaths class which allows to retrieve some standard locations 341// in the file system 342// 343// Default is 1 344// 345// Recommended setting: 1 (may be disabled to save space, but not much) 346#define wxUSE_STDPATHS 1 347 348// use wxTextBuffer class: required by wxTextFile 349#define wxUSE_TEXTBUFFER 1 350 351// use wxTextFile class: requires wxFile and wxTextBuffer, required by 352// wxFileConfig 353#define wxUSE_TEXTFILE 1 354 355// i18n support: _() macro, wxLocale class. Requires wxTextFile. 356#define wxUSE_INTL 1 357 358// Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which 359// allow to manipulate dates, times and time intervals. wxDateTime replaces the 360// old wxTime and wxDate classes which are still provided for backwards 361// compatibility (and implemented in terms of wxDateTime). 362// 363// Note that this class is relatively new and is still officially in alpha 364// stage because some features are not yet (fully) implemented. It is already 365// quite useful though and should only be disabled if you are aiming at 366// absolutely minimal version of the library. 367// 368// Requires: wxUSE_LONGLONG 369// 370// Default is 1 371// 372// Recommended setting: 1 373#define wxUSE_DATETIME 1 374 375// Set wxUSE_TIMER to 1 to compile wxTimer class 376// 377// Default is 1 378// 379// Recommended setting: 1 380#define wxUSE_TIMER 1 381 382// Use wxStopWatch clas. 383// 384// Default is 1 385// 386// Recommended setting: 1 (needed by wxSocket) 387#define wxUSE_STOPWATCH 1 388 389// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes 390// which allow the application to store its settings in the persistent 391// storage. Setting this to 1 will also enable on-demand creation of the 392// global config object in wxApp. 393// 394// See also wxUSE_CONFIG_NATIVE below. 395// 396// Recommended setting: 1 397#define wxUSE_CONFIG 1 398 399// If wxUSE_CONFIG is 1, you may choose to use either the native config 400// classes under Windows (using .INI files under Win16 and the registry under 401// Win32) or the portable text file format used by the config classes under 402// Unix. 403// 404// Default is 1 to use native classes. Note that you may still use 405// wxFileConfig even if you set this to 1 - just the config object created by 406// default for the applications needs will be a wxRegConfig or wxIniConfig and 407// not wxFileConfig. 408// 409// Recommended setting: 1 410#define wxUSE_CONFIG_NATIVE 1 411 412// If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows 413// to connect/disconnect from the network and be notified whenever the dial-up 414// network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER. 415// 416// Default is 1. 417// 418// Recommended setting: 1 419#define wxUSE_DIALUP_MANAGER 1 420 421// Compile in classes for run-time DLL loading and function calling. 422// Required by wxUSE_DIALUP_MANAGER. 423// 424// This setting is for Win32 only 425// 426// Default is 1. 427// 428// Recommended setting: 1 429#define wxUSE_DYNLIB_CLASS 1 430 431// experimental, don't use for now 432#define wxUSE_DYNAMIC_LOADER 1 433 434// Set to 1 to use socket classes 435#define wxUSE_SOCKETS 1 436 437// Set to 1 to enable virtual file systems (required by wxHTML) 438#define wxUSE_FILESYSTEM 1 439 440// Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM) 441#define wxUSE_FS_ZIP 1 442 443// Set to 1 to enable virtual archive filesystem (requires wxUSE_FILESYSTEM) 444#define wxUSE_FS_ARCHIVE 1 445 446// Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM) 447#define wxUSE_FS_INET 1 448 449// wxArchive classes for accessing archives such as zip and tar 450#define wxUSE_ARCHIVE_STREAMS 1 451 452// Set to 1 to compile wxZipInput/OutputStream classes. 453#define wxUSE_ZIPSTREAM 1 454 455// Set to 1 to compile wxTarInput/OutputStream classes. 456#define wxUSE_TARSTREAM 1 457 458// Set to 1 to compile wxZlibInput/OutputStream classes. Also required by 459// wxUSE_LIBPNG 460#define wxUSE_ZLIB 1 461 462// If enabled, the code written by Apple will be used to write, in a portable 463// way, float on the disk. See extended.c for the license which is different 464// from wxWidgets one. 465// 466// Default is 1. 467// 468// Recommended setting: 1 unless you don't like the license terms (unlikely) 469#define wxUSE_APPLE_IEEE 1 470 471// Joystick support class 472#define wxUSE_JOYSTICK 1 473 474// wxFontMapper class 475#define wxUSE_FONTMAP 1 476 477// wxMimeTypesManager class 478#define wxUSE_MIMETYPE 1 479 480// wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP 481// or wxURL you need to set this to 1. 482// 483// Default is 1. 484// 485// Recommended setting: 1 486#define wxUSE_PROTOCOL 1 487 488// The settings for the individual URL schemes 489#define wxUSE_PROTOCOL_FILE 1 490#define wxUSE_PROTOCOL_FTP 1 491#define wxUSE_PROTOCOL_HTTP 1 492 493// Define this to use wxURL class. 494#define wxUSE_URL 1 495 496// Define this to use native platform url and protocol support. 497// Currently valid only for MS-Windows. 498// Note: if you set this to 1, you can open ftp/http/gopher sites 499// and obtain a valid input stream for these sites 500// even when you set wxUSE_PROTOCOL_FTP/HTTP to 0. 501// Doing so reduces the code size. 502// 503// This code is experimental and subject to change. 504#define wxUSE_URL_NATIVE 0 505 506// Support for wxVariant class used in several places throughout the library, 507// notably in wxDataViewCtrl API. 508// 509// Default is 1. 510// 511// Recommended setting: 1 unless you want to reduce the library size as much as 512// possible in which case setting this to 0 can gain up to 100KB. 513#define wxUSE_VARIANT 1 514 515// Support for regular expression matching via wxRegEx class: enable this to 516// use POSIX regular expressions in your code. You need to compile regex 517// library from src/regex to use it under Windows. 518// 519// Default is 0 520// 521// Recommended setting: 1 if your compiler supports it, if it doesn't please 522// contribute us a makefile for src/regex for it 523#define wxUSE_REGEX 1 524 525// wxSystemOptions class 526#define wxUSE_SYSTEM_OPTIONS 1 527 528// wxSound class 529#define wxUSE_SOUND 1 530 531// Use wxMediaCtrl 532// 533// Default is 1. 534// 535// Recommended setting: 1 536#define wxUSE_MEDIACTRL 1 537 538// Use GStreamer for Unix (req a lot of dependancies) 539// 540// Default is 0 541// 542// Recommended setting: 1 (wxMediaCtrl won't work by default without it) 543#define wxUSE_GSTREAMER 0 544 545// Use wxWidget's XRC XML-based resource system. Recommended. 546// 547// Default is 1 548// 549// Recommended setting: 1 (requires wxUSE_XML) 550#define wxUSE_XRC 1 551 552// XML parsing classes. Note that their API will change in the future, so 553// using wxXmlDocument and wxXmlNode in your app is not recommended. 554// 555// Default is the same as wxUSE_XRC, i.e. 1 by default. 556// 557// Recommended setting: 1 (required by XRC) 558#define wxUSE_XML wxUSE_XRC 559 560// Use wxWidget's AUI docking system 561// 562// Default is 1 563// 564// Recommended setting: 1 565#define wxUSE_AUI 1 566 567 568// Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced 569// 2D drawing API. (Still somewhat experimental) 570// 571// Please note that on Windows you will need to link with gdiplus.lib (use 572// USE_GDIPLUS=1 for makefile builds) and distribute gdiplus.dll with your 573// application if you want it to be runnable on pre-XP systems. 574// 575// Default is 0 576// 577// Recommended setting: 1 578#ifndef wxUSE_GRAPHICS_CONTEXT 579#define wxUSE_GRAPHICS_CONTEXT 0 580#endif 581 582// ---------------------------------------------------------------------------- 583// Individual GUI controls 584// ---------------------------------------------------------------------------- 585 586// You must set wxUSE_CONTROLS to 1 if you are using any controls at all 587// (without it, wxControl class is not compiled) 588// 589// Default is 1 590// 591// Recommended setting: 1 (don't change except for very special programs) 592#define wxUSE_CONTROLS 1 593 594// wxPopupWindow class is a top level transient window. It is currently used 595// to implement wxTipWindow 596// 597// Default is 1 598// 599// Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW) 600#define wxUSE_POPUPWIN 1 601 602// wxTipWindow allows to implement the custom tooltips, it is used by the 603// context help classes. Requires wxUSE_POPUPWIN. 604// 605// Default is 1 606// 607// Recommended setting: 1 (may be set to 0) 608#define wxUSE_TIPWINDOW 1 609 610// Each of the settings below corresponds to one wxWidgets control. They are 611// all switched on by default but may be disabled if you are sure that your 612// program (including any standard dialogs it can show!) doesn't need them and 613// if you desperately want to save some space. If you use any of these you must 614// set wxUSE_CONTROLS as well. 615// 616// Default is 1 617// 618// Recommended setting: 1 619#define wxUSE_ANIMATIONCTRL 1 // wxAnimationCtrl 620#define wxUSE_BUTTON 1 // wxButton 621#define wxUSE_BMPBUTTON 1 // wxBitmapButton 622#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl 623#define wxUSE_CHECKBOX 1 // wxCheckBox 624#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN) 625#define wxUSE_CHOICE 1 // wxChoice 626#define wxUSE_COLLPANE 1 // wxCollapsiblePane 627#define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl 628#define wxUSE_COMBOBOX 1 // wxComboBox 629#define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl 630#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl 631#define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl 632#define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl 633#define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl 634#define wxUSE_GAUGE 1 // wxGauge 635#define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl 636#define wxUSE_LISTBOX 1 // wxListBox 637#define wxUSE_LISTCTRL 1 // wxListCtrl 638#define wxUSE_RADIOBOX 1 // wxRadioBox 639#define wxUSE_RADIOBTN 1 // wxRadioButton 640#define wxUSE_SCROLLBAR 1 // wxScrollBar 641#define wxUSE_SEARCHCTRL 1 // wxSearchCtrl 642#define wxUSE_SLIDER 1 // wxSlider 643#define wxUSE_SPINBTN 1 // wxSpinButton 644#define wxUSE_SPINCTRL 1 // wxSpinCtrl 645#define wxUSE_STATBOX 1 // wxStaticBox 646#define wxUSE_STATLINE 1 // wxStaticLine 647#define wxUSE_STATTEXT 1 // wxStaticText 648#define wxUSE_STATBMP 1 // wxStaticBitmap 649#define wxUSE_TEXTCTRL 1 // wxTextCtrl 650#define wxUSE_TOGGLEBTN 1 // requires wxButton 651#define wxUSE_TREECTRL 1 // wxTreeCtrl 652 653// Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR 654// below either wxStatusBar95 or a generic wxStatusBar will be used. 655// 656// Default is 1 657// 658// Recommended setting: 1 659#define wxUSE_STATUSBAR 1 660 661// Two status bar implementations are available under Win32: the generic one 662// or the wrapper around native control. For native look and feel the native 663// version should be used. 664// 665// Default is 1 for the platforms where native status bar is supported. 666// 667// Recommended setting: 1 (there is no advantage in using the generic one) 668#define wxUSE_NATIVE_STATUSBAR 1 669 670// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar 671// classes at all. Otherwise, use the native toolbar class unless 672// wxUSE_TOOLBAR_NATIVE is 0. 673// 674// Default is 1 for all settings. 675// 676// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE. 677#define wxUSE_TOOLBAR 1 678#define wxUSE_TOOLBAR_NATIVE 1 679 680// wxNotebook is a control with several "tabs" located on one of its sides. It 681// may be used to logically organise the data presented to the user instead of 682// putting everything in one huge dialog. It replaces wxTabControl and related 683// classes of wxWin 1.6x. 684// 685// Default is 1. 686// 687// Recommended setting: 1 688#define wxUSE_NOTEBOOK 1 689 690// wxListbook control is similar to wxNotebook but uses wxListCtrl instead of 691// the tabs 692// 693// Default is 1. 694// 695// Recommended setting: 1 696#define wxUSE_LISTBOOK 1 697 698// wxChoicebook control is similar to wxNotebook but uses wxChoice instead of 699// the tabs 700// 701// Default is 1. 702// 703// Recommended setting: 1 704#define wxUSE_CHOICEBOOK 1 705 706// wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of 707// the tabs 708// 709// Default is 1. 710// 711// Recommended setting: 1 712#define wxUSE_TREEBOOK 1 713 714// wxToolbook control is similar to wxNotebook but uses wxToolBar instead of 715// tabs 716// 717// Default is 1. 718// 719// Recommended setting: 1 720#define wxUSE_TOOLBOOK 1 721 722// wxTabDialog is a generic version of wxNotebook but it is incompatible with 723// the new class. It shouldn't be used in new code. 724// 725// Default is 0. 726// 727// Recommended setting: 0 (use wxNotebook) 728#define wxUSE_TAB_DIALOG 0 729 730// wxGrid class 731// 732// Default is 1, set to 0 to cut down compilation time and binaries size if you 733// don't use it. 734// 735// Recommended setting: 1 736// 737#define wxUSE_GRID 1 738 739// wxMiniFrame class: a frame with narrow title bar 740// 741// Default is 1. 742// 743// Recommended setting: 1 (it doesn't cost almost anything) 744#define wxUSE_MINIFRAME 1 745 746// wxComboCtrl and related classes: combobox with custom popup window and 747// not necessarily a listbox. 748// 749// Default is 1. 750// 751// Recommended setting: 1 but can be safely set to 0 except for wxUniv where it 752// it used by wxComboBox 753#define wxUSE_COMBOCTRL 1 754 755// wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox 756// items. 757// 758// Default is 1. 759// 760// Recommended setting: 1 but can be safely set to 0, except where it is 761// needed as a base class for generic wxBitmapComboBox. 762#define wxUSE_ODCOMBOBOX 1 763 764// wxBitmapComboBox is a combobox that can have images in front of text items. 765// 766// Default is 1. 767// 768// Recommended setting: 1 but can be safely set to 0 769#define wxUSE_BITMAPCOMBOBOX 1 770 771// ---------------------------------------------------------------------------- 772// Miscellaneous GUI stuff 773// ---------------------------------------------------------------------------- 774 775// wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar) 776#define wxUSE_ACCEL 1 777 778// Hotkey support (currently Windows only) 779#define wxUSE_HOTKEY 1 780 781// Use wxCaret: a class implementing a "cursor" in a text control (called caret 782// under Windows). 783// 784// Default is 1. 785// 786// Recommended setting: 1 (can be safely set to 0, not used by the library) 787#define wxUSE_CARET 1 788 789// Use wxDisplay class: it allows enumerating all displays on a system and 790// their geometries as well as finding the display on which the given point or 791// window lies. 792// 793// Default is 1. 794// 795// Recommended setting: 1 if you need it, can be safely set to 0 otherwise 796#define wxUSE_DISPLAY 1 797 798// Miscellaneous geometry code: needed for Canvas library 799#define wxUSE_GEOMETRY 1 800 801// Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and 802// wxListCtrl. 803// 804// Default is 1. 805// 806// Recommended setting: 1 (set it to 0 if you don't use any of the controls 807// enumerated above, then this class is mostly useless too) 808#define wxUSE_IMAGLIST 1 809 810// Use wxMenu, wxMenuBar, wxMenuItem. 811// 812// Default is 1. 813// 814// Recommended setting: 1 (can't be disabled under MSW) 815#define wxUSE_MENUS 1 816 817// Use wxSashWindow class. 818// 819// Default is 1. 820// 821// Recommended setting: 1 822#define wxUSE_SASH 1 823 824// Use wxSplitterWindow class. 825// 826// Default is 1. 827// 828// Recommended setting: 1 829#define wxUSE_SPLITTER 1 830 831// Use wxToolTip and wxWindow::Set/GetToolTip() methods. 832// 833// Default is 1. 834// 835// Recommended setting: 1 836#define wxUSE_TOOLTIPS 1 837 838// wxValidator class and related methods 839#define wxUSE_VALIDATORS 1 840 841// ---------------------------------------------------------------------------- 842// common dialogs 843// ---------------------------------------------------------------------------- 844 845// On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g. 846// file selector, printer dialog). Switching this off also switches off the 847// printing architecture and interactive wxPrinterDC. 848// 849// Default is 1 850// 851// Recommended setting: 1 (unless it really doesn't work) 852#define wxUSE_COMMON_DIALOGS 1 853 854// wxBusyInfo displays window with message when app is busy. Works in same way 855// as wxBusyCursor 856#define wxUSE_BUSYINFO 1 857 858// Use single/multiple choice dialogs. 859// 860// Default is 1 861// 862// Recommended setting: 1 (used in the library itself) 863#define wxUSE_CHOICEDLG 1 864 865// Use colour picker dialog 866// 867// Default is 1 868// 869// Recommended setting: 1 870#define wxUSE_COLOURDLG 1 871 872// wxDirDlg class for getting a directory name from user 873#define wxUSE_DIRDLG 1 874 875// TODO: setting to choose the generic or native one 876 877// Use file open/save dialogs. 878// 879// Default is 1 880// 881// Recommended setting: 1 (used in many places in the library itself) 882#define wxUSE_FILEDLG 1 883 884// Use find/replace dialogs. 885// 886// Default is 1 887// 888// Recommended setting: 1 (but may be safely set to 0) 889#define wxUSE_FINDREPLDLG 1 890 891// Use font picker dialog 892// 893// Default is 1 894// 895// Recommended setting: 1 (used in the library itself) 896#define wxUSE_FONTDLG 1 897 898// Use wxMessageDialog and wxMessageBox. 899// 900// Default is 1 901// 902// Recommended setting: 1 (used in the library itself) 903#define wxUSE_MSGDLG 1 904 905// progress dialog class for lengthy operations 906#define wxUSE_PROGRESSDLG 1 907 908// support for startup tips (wxShowTip &c) 909#define wxUSE_STARTUP_TIPS 1 910 911// text entry dialog and wxGetTextFromUser function 912#define wxUSE_TEXTDLG 1 913 914// number entry dialog 915#define wxUSE_NUMBERDLG 1 916 917// splash screen class 918#define wxUSE_SPLASH 1 919 920// wizards 921#define wxUSE_WIZARDDLG 1 922 923// Compile in wxAboutBox() function showing the standard "About" dialog. 924// 925// Default is 1 926// 927// Recommended setting: 1 but can be set to 0 to save some space if you don't 928// use this function 929#define wxUSE_ABOUTDLG 1 930 931// ---------------------------------------------------------------------------- 932// Metafiles support 933// ---------------------------------------------------------------------------- 934 935// Windows supports the graphics format known as metafile which is, though not 936// portable, is widely used under Windows and so is supported by wxWin (under 937// Windows only, of course). Win16 (Win3.1) used the so-called "Window 938// MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in 939// Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by 940// default, WMFs will be used under Win16 and EMFs under Win32. This may be 941// changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting 942// wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile 943// in any metafile related classes at all. 944// 945// Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS. 946// 947// Recommended setting: default or 0 for everything for portable programs. 948#define wxUSE_METAFILE 1 949#define wxUSE_ENH_METAFILE 1 950#define wxUSE_WIN_METAFILES_ALWAYS 0 951 952// ---------------------------------------------------------------------------- 953// Big GUI components 954// ---------------------------------------------------------------------------- 955 956// Set to 0 to disable MDI support. 957// 958// Requires wxUSE_NOTEBOOK under platforms other than MSW. 959// 960// Default is 1. 961// 962// Recommended setting: 1, can be safely set to 0. 963#define wxUSE_MDI 1 964 965// Set to 0 to disable document/view architecture 966#define wxUSE_DOC_VIEW_ARCHITECTURE 1 967 968// Set to 0 to disable MDI document/view architecture 969// 970// Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE 971#define wxUSE_MDI_ARCHITECTURE 1 972 973// Set to 0 to disable print/preview architecture code 974#define wxUSE_PRINTING_ARCHITECTURE 1 975 976// wxHTML sublibrary allows to display HTML in wxWindow programs and much, 977// much more. 978// 979// Default is 1. 980// 981// Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a 982// smaller library. 983#define wxUSE_HTML 1 984 985// Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL 986// headers and libraries to be able to compile the library with wxUSE_GLCANVAS 987// set to 1. Note that for some compilers (notably Microsoft Visual C++) you 988// will need to manually add opengl32.lib and glu32.lib to the list of 989// libraries linked with your program if you use OpenGL. 990// 991// Default is 0. 992// 993// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise 994#define wxUSE_GLCANVAS 0 995 996// wxRichTextCtrl allows editing of styled text. 997// 998// Default is 1. 999// 1000// Recommended setting: 1, set to 0 if you want compile a 1001// smaller library. 1002#define wxUSE_RICHTEXT 1 1003 1004// ---------------------------------------------------------------------------- 1005// Data transfer 1006// ---------------------------------------------------------------------------- 1007 1008// Use wxClipboard class for clipboard copy/paste. 1009// 1010// Default is 1. 1011// 1012// Recommended setting: 1 1013#define wxUSE_CLIPBOARD 1 1014 1015// Use wxDataObject and related classes. Needed for clipboard and OLE drag and 1016// drop 1017// 1018// Default is 1. 1019// 1020// Recommended setting: 1 1021#define wxUSE_DATAOBJ 1 1022 1023// Use wxDropTarget and wxDropSource classes for drag and drop (this is 1024// different from "built in" drag and drop in wxTreeCtrl which is always 1025// available). Requires wxUSE_DATAOBJ. 1026// 1027// Default is 1. 1028// 1029// Recommended setting: 1 1030#define wxUSE_DRAG_AND_DROP 1 1031 1032// Use wxAccessible for enhanced and customisable accessibility. 1033// Depends on wxUSE_OLE. 1034// 1035// Default is 0. 1036// 1037// Recommended setting (at present): 0 1038#define wxUSE_ACCESSIBILITY 0 1039 1040// ---------------------------------------------------------------------------- 1041// miscellaneous settings 1042// ---------------------------------------------------------------------------- 1043 1044// wxSingleInstanceChecker class allows to verify at startup if another program 1045// instance is running. 1046// 1047// Default is 1 1048// 1049// Recommended setting: 1 (the class is tiny, disabling it won't save much 1050// space) 1051#define wxUSE_SNGLINST_CHECKER 1 1052 1053#define wxUSE_DRAGIMAGE 1 1054 1055#define wxUSE_IPC 1 1056 // 0 for no interprocess comms 1057#define wxUSE_HELP 1 1058 // 0 for no help facility 1059 1060// Should we use MS HTML help for wxHelpController? If disabled, neither 1061// wxCHMHelpController nor wxBestHelpController are available. 1062// 1063// Default is 1 under MSW, 0 is always used for the other platforms. 1064// 1065// Recommended setting: 1, only set to 0 if you have trouble compiling 1066// wxCHMHelpController (could be a problem with really ancient compilers) 1067#define wxUSE_MS_HTML_HELP 1 1068 1069 1070// Use wxHTML-based help controller? 1071#define wxUSE_WXHTML_HELP 1 1072 1073#define wxUSE_RESOURCES 0 1074 // 0 for no wxGetResource/wxWriteResource 1075#define wxUSE_CONSTRAINTS 1 1076 // 0 for no window layout constraint system 1077 1078#define wxUSE_SPLINES 1 1079 // 0 for no splines 1080 1081#define wxUSE_MOUSEWHEEL 1 1082 // Include mouse wheel support 1083 1084// ---------------------------------------------------------------------------- 1085// postscript support settings 1086// ---------------------------------------------------------------------------- 1087 1088// Set to 1 for PostScript device context. 1089#define wxUSE_POSTSCRIPT 0 1090 1091// Set to 1 to use font metric files in GetTextExtent 1092#define wxUSE_AFM_FOR_POSTSCRIPT 1 1093 1094// ---------------------------------------------------------------------------- 1095// database classes 1096// ---------------------------------------------------------------------------- 1097 1098// Define 1 to use ODBC classes 1099#define wxUSE_ODBC 0 1100 1101// For backward compatibility reasons, this parameter now only controls the 1102// default scrolling method used by cursors. This default behavior can be 1103// overriden by setting the second param of wxDB::wxDbGetConnection() or 1104// wxDb() constructor to indicate whether the connection (and any wxDbTable()s 1105// that use the connection) should support forward only scrolling of cursors, 1106// or both forward and backward support for backward scrolling cursors is 1107// dependent on the data source as well as the ODBC driver being used. 1108#define wxODBC_FWD_ONLY_CURSORS 1 1109 1110// Default is 0. Set to 1 to use the deprecated classes, enum types, function, 1111// member variables. With a setting of 1, full backward compatibility with the 1112// 2.0.x release is possible. It is STRONGLY recommended that this be set to 0, 1113// as future development will be done only on the non-deprecated 1114// functions/classes/member variables/etc. 1115#define wxODBC_BACKWARD_COMPATABILITY 0 1116 1117// ---------------------------------------------------------------------------- 1118// other compiler (mis)features 1119// ---------------------------------------------------------------------------- 1120 1121// Set this to 0 if your compiler can't cope with omission of prototype 1122// parameters. 1123// 1124// Default is 1. 1125// 1126// Recommended setting: 1 (should never need to set this to 0) 1127#define REMOVE_UNUSED_ARG 1 1128 1129// VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix 1130// them. Set to 1 for <iostream.h>, 0 for <iostream>. Note that VC++ 7.1 1131// and later doesn't support wxUSE_IOSTREAMH == 1 and so <iostream> will be 1132// used anyhow. 1133// 1134// Default is 1. 1135// 1136// Recommended setting: whatever your compiler likes more 1137#define wxUSE_IOSTREAMH 1 1138 1139// ---------------------------------------------------------------------------- 1140// image format support 1141// ---------------------------------------------------------------------------- 1142 1143// wxImage supports many different image formats which can be configured at 1144// compile-time. BMP is always supported, others are optional and can be safely 1145// disabled if you don't plan to use images in such format sometimes saving 1146// substantial amount of code in the final library. 1147// 1148// Some formats require an extra library which is included in wxWin sources 1149// which is mentioned if it is the case. 1150 1151// Set to 1 for wxImage support (recommended). 1152#define wxUSE_IMAGE 1 1153 1154// Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB. 1155#define wxUSE_LIBPNG 1 1156 1157// Set to 1 for JPEG format support (requires libjpeg) 1158#define wxUSE_LIBJPEG 1 1159 1160// Set to 1 for TIFF format support (requires libtiff) 1161#define wxUSE_LIBTIFF 1 1162 1163// Set to 1 for TGA format support (loading only) 1164#define wxUSE_TGA 1 1165 1166// Set to 1 for GIF format support 1167#define wxUSE_GIF 1 1168 1169// Set to 1 for PNM format support 1170#define wxUSE_PNM 1 1171 1172// Set to 1 for PCX format support 1173#define wxUSE_PCX 1 1174 1175// Set to 1 for IFF format support (Amiga format) 1176#define wxUSE_IFF 0 1177 1178// Set to 1 for XPM format support 1179#define wxUSE_XPM 1 1180 1181// Set to 1 for MS Icons and Cursors format support 1182#define wxUSE_ICO_CUR 1 1183 1184// Set to 1 to compile in wxPalette class 1185#define wxUSE_PALETTE 1 1186 1187// ---------------------------------------------------------------------------- 1188// wxUniversal-only options 1189// ---------------------------------------------------------------------------- 1190 1191// Set to 1 to enable compilation of all themes, this is the default 1192#define wxUSE_ALL_THEMES 1 1193 1194// Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES 1195// is unset, if it is set these options are not used; notice that metal theme 1196// uses Win32 one 1197#define wxUSE_THEME_GTK 0 1198#define wxUSE_THEME_METAL 0 1199#define wxUSE_THEME_MONO 0 1200#define wxUSE_THEME_WIN32 0 1201 1202 1203/* --- end common options --- */ 1204 1205// ---------------------------------------------------------------------------- 1206// Windows-only settings 1207// ---------------------------------------------------------------------------- 1208 1209// Set this to 1 if you want to use wxWidgets and MFC in the same program. This 1210// will override some other settings (see below) 1211// 1212// Default is 0. 1213// 1214// Recommended setting: 0 unless you really have to use MFC 1215#define wxUSE_MFC 0 1216 1217// Set this to 1 for generic OLE support: this is required for drag-and-drop, 1218// clipboard, OLE Automation. Only set it to 0 if your compiler is very old and 1219// can't compile/doesn't have the OLE headers. 1220// 1221// Default is 1. 1222// 1223// Recommended setting: 1 1224#define wxUSE_OLE 1 1225 1226// wxDC cacheing implementation 1227#define wxUSE_DC_CACHEING 1 1228 1229// Set this to 1 to enable the use of DIB's for wxBitmap to support 1230// bitmaps > 16MB on Win95/98/Me. Set to 0 to use DDB's only. 1231#define wxUSE_DIB_FOR_BITMAP 0 1232 1233// Set this to 1 to enable wxDIB 1234#define wxUSE_WXDIB 1 1235 1236// Set to 0 to disable PostScript print/preview architecture code under Windows 1237// (just use Windows printing). 1238#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1 1239 1240// Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH 1241// which allows to put more than ~32Kb of text in it even under Win9x (NT 1242// doesn't have such limitation). 1243// 1244// Default is 1 for compilers which support it 1245// 1246// Recommended setting: 1, only set it to 0 if your compiler doesn't have 1247// or can't compile <richedit.h> 1248#if defined(__WIN95__) && !defined(__WINE__) && !defined(__GNUWIN32_OLD__) 1249#define wxUSE_RICHEDIT 1 1250 1251// TODO: This should be ifdef'ed for any compilers that don't support 1252// RichEdit 2.0 but do have RichEdit 1.0... 1253#define wxUSE_RICHEDIT2 1 1254 1255#else 1256#define wxUSE_RICHEDIT 0 1257#define wxUSE_RICHEDIT2 0 1258#endif 1259 1260// Set this to 1 to enable support for the owner-drawn menu and listboxes. This 1261// is required by wxUSE_CHECKLISTBOX. 1262// 1263// Default is 1. 1264// 1265// Recommended setting: 1, set to 0 for a small library size reduction 1266#define wxUSE_OWNER_DRAWN 1 1267 1268// Set to 1 to compile MS Windows XP theme engine support 1269#define wxUSE_UXTHEME 1 1270 1271// Set to 1 to auto-adapt to MS Windows XP themes where possible 1272// (notably, wxNotebook pages) 1273#define wxUSE_UXTHEME_AUTO 1 1274 1275// ---------------------------------------------------------------------------- 1276// Generic versions of native controls 1277// ---------------------------------------------------------------------------- 1278 1279// Set this to 1 to be able to use wxDatePickerCtrlGeneric in addition to the 1280// native wxDatePickerCtrl 1281// 1282// Default is 0. 1283// 1284// Recommended setting: 0, this is mainly used for testing 1285#define wxUSE_DATEPICKCTRL_GENERIC 0 1286 1287// ---------------------------------------------------------------------------- 1288// Crash debugging helpers 1289// ---------------------------------------------------------------------------- 1290 1291// Set this to 1 to be able to use wxCrashReport::Generate() to create mini 1292// dumps of your program when it crashes (or at any other moment) 1293// 1294// Default is 1 if supported by the compiler (VC++ and recent BC++ only). 1295// 1296// Recommended setting: 1, set to 0 if your programs never crash 1297#define wxUSE_CRASHREPORT 0 1298 1299// ---------------------------------------------------------------------------- 1300// obsolete settings 1301// ---------------------------------------------------------------------------- 1302 1303// NB: all settings in this section are obsolete and should not be used/changed 1304// at all, they will disappear 1305 1306// Define 1 to use bitmap messages. 1307#define wxUSE_BITMAP_MESSAGE 1 1308 1309#endif // _WX_SETUP_H_ 1310