t_bridge.sh revision 1.13
1# $NetBSD: t_bridge.sh,v 1.13 2016/08/10 22:37:07 kre Exp $ 2# 3# Copyright (c) 2014 The NetBSD Foundation, Inc. 4# All rights reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions 8# are met: 9# 1. Redistributions of source code must retain the above copyright 10# notice, this list of conditions and the following disclaimer. 11# 2. Redistributions in binary form must reproduce the above copyright 12# notice, this list of conditions and the following disclaimer in the 13# documentation and/or other materials provided with the distribution. 14# 15# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 16# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 17# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 18# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 19# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 20# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 21# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 22# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 23# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 24# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 25# POSSIBILITY OF SUCH DAMAGE. 26# 27 28libs1="-lrumpnet -lrumpnet_net -lrumpnet_netinet" 29libs2="-lrumpnet_bridge -lrumpnet_shmif -lrumpdev" 30libs6="-lrumpnet_netinet6" 31 32inetserver="rump_server ${libs1} ${libs2}" 33inet6server="rump_server ${libs1} ${libs6} ${libs2}" 34 35SOCK1=unix://commsock1 36SOCK2=unix://commsock2 37SOCK3=unix://commsock3 38IP1=10.0.0.1 39IP2=10.0.0.2 40IP61=fc00::1 41IP62=fc00::2 42IPBR1=10.0.0.11 43IPBR2=10.0.0.12 44IP6BR1=fc00::11 45IP6BR2=fc00::12 46 47TIMEOUT=5 48 49atf_test_case bridge_ipv4 cleanup 50atf_test_case bridge_ipv6 cleanup 51atf_test_case bridge_rtable cleanup 52atf_test_case bridge_member_ipv4 cleanup 53atf_test_case bridge_member_ipv6 cleanup 54 55bridge_ipv4_head() 56{ 57 atf_set "descr" "Does simple if_bridge tests" 58 atf_set "require.progs" "rump_server" 59} 60 61bridge_ipv6_head() 62{ 63 atf_set "descr" "Does simple if_bridge tests (IPv6)" 64 atf_set "require.progs" "rump_server" 65} 66 67bridge_rtable_head() 68{ 69 atf_set "descr" "Tests route table operations of if_bridge" 70 atf_set "require.progs" "rump_server" 71} 72 73bridge_member_ipv4_head() 74{ 75 atf_set "descr" "Tests if_bridge with members with an IP address" 76 atf_set "require.progs" "rump_server" 77} 78 79bridge_member_ipv6_head() 80{ 81 atf_set "descr" "Tests if_bridge with members with an IP address (IPv6)" 82 atf_set "require.progs" "rump_server" 83} 84 85setup_endpoint() 86{ 87 sock=${1} 88 addr=${2} 89 bus=${3} 90 mode=${4} 91 92 export RUMP_SERVER=${sock} 93 atf_check -s exit:0 rump.ifconfig shmif0 create 94 atf_check -s exit:0 rump.ifconfig shmif0 linkstr ${bus} 95 if [ $mode = "ipv6" ]; then 96 atf_check -s exit:0 rump.ifconfig shmif0 inet6 ${addr} 97 else 98 atf_check -s exit:0 rump.ifconfig shmif0 inet ${addr} netmask 0xffffff00 99 fi 100 101 atf_check -s exit:0 rump.ifconfig shmif0 up 102 rump.ifconfig shmif0 103} 104 105test_endpoint() 106{ 107 sock=${1} 108 addr=${2} 109 bus=${3} 110 mode=${4} 111 112 export RUMP_SERVER=${sock} 113 atf_check -s exit:0 -o match:shmif0 rump.ifconfig 114 if [ $mode = "ipv6" ]; then 115 atf_check -s exit:0 -o ignore rump.ping6 -n -c 1 -X $TIMEOUT ${addr} 116 else 117 atf_check -s exit:0 -o ignore rump.ping -n -w $TIMEOUT -c 1 ${addr} 118 fi 119} 120 121show_endpoint() 122{ 123 sock=${1} 124 125 export RUMP_SERVER=${sock} 126 rump.ifconfig -v shmif0 127} 128 129test_setup() 130{ 131 test_endpoint $SOCK1 $IP1 bus1 ipv4 132 test_endpoint $SOCK3 $IP2 bus2 ipv4 133 134 export RUMP_SERVER=$SOCK2 135 atf_check -s exit:0 -o match:shmif0 rump.ifconfig 136 atf_check -s exit:0 -o match:shmif1 rump.ifconfig 137} 138 139test_setup6() 140{ 141 test_endpoint $SOCK1 $IP61 bus1 ipv6 142 test_endpoint $SOCK3 $IP62 bus2 ipv6 143 144 export RUMP_SERVER=$SOCK2 145 atf_check -s exit:0 -o match:shmif0 rump.ifconfig 146 atf_check -s exit:0 -o match:shmif1 rump.ifconfig 147} 148 149setup_bridge_server() 150{ 151 export RUMP_SERVER=$SOCK2 152 atf_check -s exit:0 rump.ifconfig shmif0 create 153 atf_check -s exit:0 rump.ifconfig shmif0 linkstr bus1 154 atf_check -s exit:0 rump.ifconfig shmif0 up 155 156 atf_check -s exit:0 rump.ifconfig shmif1 create 157 atf_check -s exit:0 rump.ifconfig shmif1 linkstr bus2 158 atf_check -s exit:0 rump.ifconfig shmif1 up 159} 160 161setup() 162{ 163 atf_check -s exit:0 ${inetserver} $SOCK1 164 atf_check -s exit:0 ${inetserver} $SOCK2 165 atf_check -s exit:0 ${inetserver} $SOCK3 166 167 setup_endpoint $SOCK1 $IP1 bus1 ipv4 168 setup_endpoint $SOCK3 $IP2 bus2 ipv4 169 setup_bridge_server 170} 171 172setup6() 173{ 174 atf_check -s exit:0 ${inet6server} $SOCK1 175 atf_check -s exit:0 ${inet6server} $SOCK2 176 atf_check -s exit:0 ${inet6server} $SOCK3 177 178 setup_endpoint $SOCK1 $IP61 bus1 ipv6 179 setup_endpoint $SOCK3 $IP62 bus2 ipv6 180 setup_bridge_server 181} 182 183setup_bridge() 184{ 185 export RUMP_SERVER=$SOCK2 186 atf_check -s exit:0 rump.ifconfig bridge0 create 187 atf_check -s exit:0 rump.ifconfig bridge0 up 188 189 export LD_PRELOAD=/usr/lib/librumphijack.so 190 atf_check -s exit:0 /sbin/brconfig bridge0 add shmif0 191 atf_check -s exit:0 /sbin/brconfig bridge0 add shmif1 192 /sbin/brconfig bridge0 193 unset LD_PRELOAD 194 rump.ifconfig shmif0 195 rump.ifconfig shmif1 196} 197 198setup_member_ip() 199{ 200 export RUMP_SERVER=$SOCK2 201 export LD_PRELOAD=/usr/lib/librumphijack.so 202 atf_check -s exit:0 rump.ifconfig shmif0 $IPBR1/24 203 atf_check -s exit:0 rump.ifconfig shmif1 $IPBR2/24 204 atf_check -s exit:0 rump.ifconfig -w 10 205 /sbin/brconfig bridge0 206 unset LD_PRELOAD 207 rump.ifconfig shmif0 208 rump.ifconfig shmif1 209} 210 211setup_member_ip6() 212{ 213 export RUMP_SERVER=$SOCK2 214 export LD_PRELOAD=/usr/lib/librumphijack.so 215 atf_check -s exit:0 rump.ifconfig shmif0 inet6 $IP6BR1 216 atf_check -s exit:0 rump.ifconfig shmif1 inet6 $IP6BR2 217 atf_check -s exit:0 rump.ifconfig -w 10 218 /sbin/brconfig bridge0 219 unset LD_PRELOAD 220 rump.ifconfig shmif0 221 rump.ifconfig shmif1 222} 223 224teardown_bridge() 225{ 226 export RUMP_SERVER=$SOCK2 227 export LD_PRELOAD=/usr/lib/librumphijack.so 228 /sbin/brconfig bridge0 229 atf_check -s exit:0 /sbin/brconfig bridge0 delete shmif0 230 atf_check -s exit:0 /sbin/brconfig bridge0 delete shmif1 231 /sbin/brconfig bridge0 232 unset LD_PRELOAD 233 rump.ifconfig shmif0 234 rump.ifconfig shmif1 235} 236 237test_setup_bridge() 238{ 239 export RUMP_SERVER=$SOCK2 240 export LD_PRELOAD=/usr/lib/librumphijack.so 241 atf_check -s exit:0 -o match:shmif0 /sbin/brconfig bridge0 242 atf_check -s exit:0 -o match:shmif1 /sbin/brconfig bridge0 243 /sbin/brconfig bridge0 244 unset LD_PRELOAD 245} 246 247cleanup() 248{ 249 env RUMP_SERVER=$SOCK1 rump.halt 250 env RUMP_SERVER=$SOCK2 rump.halt 251 env RUMP_SERVER=$SOCK3 rump.halt 252} 253 254dump_bus() 255{ 256 /usr/bin/shmif_dumpbus -p - bus1 2>/dev/null| /usr/sbin/tcpdump -n -e -r - 257 /usr/bin/shmif_dumpbus -p - bus2 2>/dev/null| /usr/sbin/tcpdump -n -e -r - 258} 259 260down_up_interfaces() 261{ 262 export RUMP_SERVER=$SOCK1 263 rump.ifconfig shmif0 down 264 rump.ifconfig shmif0 up 265 export RUMP_SERVER=$SOCK3 266 rump.ifconfig shmif0 down 267 rump.ifconfig shmif0 up 268} 269 270test_ping_failure() 271{ 272 export RUMP_SERVER=$SOCK1 273 atf_check -s not-exit:0 -o ignore rump.ping -q -n -w $TIMEOUT -c 1 $IP2 274 export RUMP_SERVER=$SOCK3 275 atf_check -s not-exit:0 -o ignore rump.ping -q -n -w $TIMEOUT -c 1 $IP1 276} 277 278test_ping_success() 279{ 280 export RUMP_SERVER=$SOCK1 281 rump.ifconfig -v shmif0 282 atf_check -s exit:0 -o ignore rump.ping -q -n -w $TIMEOUT -c 1 $IP2 283 rump.ifconfig -v shmif0 284 285 export RUMP_SERVER=$SOCK3 286 rump.ifconfig -v shmif0 287 atf_check -s exit:0 -o ignore rump.ping -q -n -w $TIMEOUT -c 1 $IP1 288 rump.ifconfig -v shmif0 289} 290 291test_ping6_failure() 292{ 293 export RUMP_SERVER=$SOCK1 294 atf_check -s not-exit:0 -o ignore rump.ping6 -q -n -c 1 -X $TIMEOUT $IP62 295 export RUMP_SERVER=$SOCK3 296 atf_check -s not-exit:0 -o ignore rump.ping6 -q -n -c 1 -X $TIMEOUT $IP61 297} 298 299test_ping6_success() 300{ 301 export RUMP_SERVER=$SOCK1 302 rump.ifconfig -v shmif0 303 atf_check -s exit:0 -o ignore rump.ping6 -q -n -c 1 -X $TIMEOUT $IP62 304 rump.ifconfig -v shmif0 305 306 export RUMP_SERVER=$SOCK3 307 rump.ifconfig -v shmif0 308 atf_check -s exit:0 -o ignore rump.ping6 -q -n -c 1 -X $TIMEOUT $IP61 309 rump.ifconfig -v shmif0 310} 311 312test_ping_member() 313{ 314 export RUMP_SERVER=$SOCK1 315 rump.ifconfig -v shmif0 316 atf_check -s exit:0 -o ignore rump.ping -q -n -w $TIMEOUT -c 1 $IPBR1 317 rump.ifconfig -v shmif0 318 # Test for PR#48104 319 atf_check -s exit:0 -o ignore rump.ping -q -n -w $TIMEOUT -c 1 $IPBR2 320 rump.ifconfig -v shmif0 321 322 export RUMP_SERVER=$SOCK3 323 rump.ifconfig -v shmif0 324 # Test for PR#48104 325 atf_check -s exit:0 -o ignore rump.ping -q -n -w $TIMEOUT -c 1 $IPBR1 326 rump.ifconfig -v shmif0 327 atf_check -s exit:0 -o ignore rump.ping -q -n -w $TIMEOUT -c 1 $IPBR2 328 rump.ifconfig -v shmif0 329} 330 331test_ping6_member() 332{ 333 export RUMP_SERVER=$SOCK1 334 rump.ifconfig -v shmif0 335 atf_check -s exit:0 -o ignore rump.ping6 -q -n -X $TIMEOUT -c 1 $IP6BR1 336 rump.ifconfig -v shmif0 337 # Test for PR#48104 338 atf_check -s exit:0 -o ignore rump.ping6 -q -n -X $TIMEOUT -c 1 $IP6BR2 339 rump.ifconfig -v shmif0 340 341 export RUMP_SERVER=$SOCK3 342 rump.ifconfig -v shmif0 343 # Test for PR#48104 344 atf_check -s exit:0 -o ignore rump.ping6 -q -n -X $TIMEOUT -c 1 $IP6BR1 345 rump.ifconfig -v shmif0 346 atf_check -s exit:0 -o ignore rump.ping6 -q -n -X $TIMEOUT -c 1 $IP6BR2 347 rump.ifconfig -v shmif0 348} 349 350get_number_of_caches() 351{ 352 export RUMP_SERVER=$SOCK2 353 export LD_PRELOAD=/usr/lib/librumphijack.so 354 echo $(($(/sbin/brconfig bridge0 |grep -A 100 "Address cache" |wc -l) - 1)) 355 unset LD_PRELOAD 356} 357 358test_brconfig_maxaddr() 359{ 360 addr1= addr3= n= 361 362 # Get MAC addresses of the endpoints. 363 export RUMP_SERVER=$SOCK1 364 addr1=$(rump.ifconfig shmif0 |awk '/address:/ { print $2;}') 365 export RUMP_SERVER=$SOCK3 366 addr3=$(rump.ifconfig shmif0 |awk '/address:/ { print $2;}') 367 unset RUMP_SERVER 368 369 # Refill the MAC addresses of the endpoints. 370 export RUMP_SERVER=$SOCK1 371 atf_check -s exit:0 -o ignore rump.ping -n -w $TIMEOUT -c 1 $IP2 372 export RUMP_SERVER=$SOCK2 373 export LD_PRELOAD=/usr/lib/librumphijack.so 374 /sbin/brconfig bridge0 375 atf_check -s exit:0 -o match:"$addr1 shmif0" /sbin/brconfig bridge0 376 atf_check -s exit:0 -o match:"$addr3 shmif1" /sbin/brconfig bridge0 377 378 # Check the default # of caches is 100 379 atf_check -s exit:0 -o match:"max cache: 100" /sbin/brconfig bridge0 380 381 # Test two MAC addresses are cached 382 n=$(get_number_of_caches) 383 atf_check_equal $n 2 384 385 # Limit # of caches to one 386 atf_check -s exit:0 -o ignore /sbin/brconfig bridge0 maxaddr 1 387 atf_check -s exit:0 -o match:"max cache: 1" /sbin/brconfig bridge0 388 /sbin/brconfig bridge0 389 390 # Test just one address is cached 391 n=$(get_number_of_caches) 392 atf_check_equal $n 1 393 394 # Increase # of caches to two 395 atf_check -s exit:0 -o ignore /sbin/brconfig bridge0 maxaddr 2 396 atf_check -s exit:0 -o match:"max cache: 2" /sbin/brconfig bridge0 397 unset LD_PRELOAD 398 399 # Test we can cache two addresses again 400 export RUMP_SERVER=$SOCK1 401 atf_check -s exit:0 -o ignore rump.ping -n -w $TIMEOUT -c 1 $IP2 402 export RUMP_SERVER=$SOCK2 403 export LD_PRELOAD=/usr/lib/librumphijack.so 404 /sbin/brconfig bridge0 405 atf_check -s exit:0 -o match:"$addr1 shmif0" /sbin/brconfig bridge0 406 atf_check -s exit:0 -o match:"$addr3 shmif1" /sbin/brconfig bridge0 407 unset LD_PRELOAD 408} 409 410bridge_ipv4_body() 411{ 412 setup 413 test_setup 414 415 # Enable once PR kern/49219 is fixed 416 #test_ping_failure 417 418 setup_bridge 419 sleep 1 420 test_setup_bridge 421 test_ping_success 422 423 teardown_bridge 424 test_ping_failure 425} 426 427bridge_ipv6_body() 428{ 429 setup6 430 test_setup6 431 432 test_ping6_failure 433 434 setup_bridge 435 sleep 1 436 test_setup_bridge 437 test_ping6_success 438 439 teardown_bridge 440 test_ping6_failure 441} 442 443bridge_rtable_body() 444{ 445 addr1= addr3= 446 447 setup 448 setup_bridge 449 450 # Get MAC addresses of the endpoints. 451 export RUMP_SERVER=$SOCK1 452 addr1=$(rump.ifconfig shmif0 |awk '/address:/ { print $2;}') 453 export RUMP_SERVER=$SOCK3 454 addr3=$(rump.ifconfig shmif0 |awk '/address:/ { print $2;}') 455 unset RUMP_SERVER 456 457 # Confirm there is no MAC address caches. 458 export RUMP_SERVER=$SOCK2 459 export LD_PRELOAD=/usr/lib/librumphijack.so 460 /sbin/brconfig bridge0 461 atf_check -s exit:0 -o not-match:"$addr1" /sbin/brconfig bridge0 462 atf_check -s exit:0 -o not-match:"$addr3" /sbin/brconfig bridge0 463 unset LD_PRELOAD 464 465 # Make the bridge learn the MAC addresses of the endpoints. 466 export RUMP_SERVER=$SOCK1 467 atf_check -s exit:0 -o ignore rump.ping -n -w $TIMEOUT -c 1 $IP2 468 unset RUMP_SERVER 469 470 # Tests the addresses are in the cache. 471 export RUMP_SERVER=$SOCK2 472 export LD_PRELOAD=/usr/lib/librumphijack.so 473 /sbin/brconfig bridge0 474 atf_check -s exit:0 -o match:"$addr1 shmif0" /sbin/brconfig bridge0 475 atf_check -s exit:0 -o match:"$addr3 shmif1" /sbin/brconfig bridge0 476 477 # Tests brconfig deladdr 478 atf_check -s exit:0 -o ignore /sbin/brconfig bridge0 deladdr "$addr1" 479 atf_check -s exit:0 -o not-match:"$addr1 shmif0" /sbin/brconfig bridge0 480 atf_check -s exit:0 -o ignore /sbin/brconfig bridge0 deladdr "$addr3" 481 atf_check -s exit:0 -o not-match:"$addr3 shmif1" /sbin/brconfig bridge0 482 unset LD_PRELOAD 483 484 # Refill the MAC addresses of the endpoints. 485 export RUMP_SERVER=$SOCK1 486 atf_check -s exit:0 -o ignore rump.ping -n -w $TIMEOUT -c 1 $IP2 487 unset RUMP_SERVER 488 export RUMP_SERVER=$SOCK2 489 export LD_PRELOAD=/usr/lib/librumphijack.so 490 /sbin/brconfig bridge0 491 atf_check -s exit:0 -o match:"$addr1 shmif0" /sbin/brconfig bridge0 492 atf_check -s exit:0 -o match:"$addr3 shmif1" /sbin/brconfig bridge0 493 494 # Tests brconfig flush. 495 atf_check -s exit:0 -o ignore /sbin/brconfig bridge0 flush 496 atf_check -s exit:0 -o not-match:"$addr1 shmif0" /sbin/brconfig bridge0 497 atf_check -s exit:0 -o not-match:"$addr3 shmif1" /sbin/brconfig bridge0 498 unset LD_PRELOAD 499 500 # Tests brconfig timeout. 501 export RUMP_SERVER=$SOCK2 502 export LD_PRELOAD=/usr/lib/librumphijack.so 503 atf_check -s exit:0 -o match:"timeout: 1200" /sbin/brconfig bridge0 504 atf_check -s exit:0 -o ignore /sbin/brconfig bridge0 timeout 10 505 atf_check -s exit:0 -o match:"timeout: 10" /sbin/brconfig bridge0 506 unset LD_PRELOAD 507 508 # Tests brconfig maxaddr. 509 test_brconfig_maxaddr 510 511 # TODO: brconfig static/flushall/discover/learn 512 # TODO: cache expiration; it takes 5 minutes at least and we want to 513 # wait here so long. Should we have a sysctl to change the period? 514} 515 516bridge_member_ipv4_body() 517{ 518 setup 519 test_setup 520 521 # Enable once PR kern/49219 is fixed 522 #test_ping_failure 523 524 setup_bridge 525 sleep 1 526 test_setup_bridge 527 test_ping_success 528 529 setup_member_ip 530 test_ping_member 531 532 teardown_bridge 533 test_ping_failure 534} 535 536bridge_member_ipv6_body() 537{ 538 setup6 539 test_setup6 540 541 test_ping6_failure 542 543 setup_bridge 544 sleep 1 545 test_setup_bridge 546 test_ping6_success 547 548 setup_member_ip6 549 test_ping6_member 550 551 teardown_bridge 552 test_ping6_failure 553} 554 555bridge_ipv4_cleanup() 556{ 557 dump_bus 558 cleanup 559} 560 561bridge_ipv6_cleanup() 562{ 563 dump_bus 564 cleanup 565} 566 567bridge_rtable_cleanup() 568{ 569 dump_bus 570 cleanup 571} 572 573bridge_member_ipv4_cleanup() 574{ 575 dump_bus 576 cleanup 577} 578 579bridge_member_ipv6_cleanup() 580{ 581 dump_bus 582 cleanup 583} 584 585atf_init_test_cases() 586{ 587 atf_add_test_case bridge_ipv4 588 atf_add_test_case bridge_ipv6 589 atf_add_test_case bridge_rtable 590 atf_add_test_case bridge_member_ipv4 591 atf_add_test_case bridge_member_ipv6 592} 593