1/******************************************************************************* 2 * 3 * Module Name: utresdecode - Resource descriptor keyword strings 4 * 5 ******************************************************************************/ 6 7/* 8 * Copyright (C) 2000 - 2023, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44#include "acpi.h" 45#include "accommon.h" 46#include "acresrc.h" 47 48 49#define _COMPONENT ACPI_UTILITIES 50 ACPI_MODULE_NAME ("utresdecode") 51 52 53#if defined (ACPI_DEBUG_OUTPUT) || \ 54 defined (ACPI_DISASSEMBLER) || \ 55 defined (ACPI_DEBUGGER) 56 57/* 58 * Strings used to decode resource descriptors. 59 * Used by both the disassembler and the debugger resource dump routines 60 */ 61const char *AcpiGbl_BmDecode[] = 62{ 63 "NotBusMaster", 64 "BusMaster" 65}; 66 67const char *AcpiGbl_ConfigDecode[] = 68{ 69 "0 - Good Configuration", 70 "1 - Acceptable Configuration", 71 "2 - Suboptimal Configuration", 72 "3 - ***Invalid Configuration***", 73}; 74 75const char *AcpiGbl_ConsumeDecode[] = 76{ 77 "ResourceProducer", 78 "ResourceConsumer" 79}; 80 81const char *AcpiGbl_DecDecode[] = 82{ 83 "PosDecode", 84 "SubDecode" 85}; 86 87const char *AcpiGbl_HeDecode[] = 88{ 89 "Level", 90 "Edge" 91}; 92 93const char *AcpiGbl_IoDecode[] = 94{ 95 "Decode10", 96 "Decode16" 97}; 98 99const char *AcpiGbl_LlDecode[] = 100{ 101 "ActiveHigh", 102 "ActiveLow", 103 "ActiveBoth", 104 "Reserved" 105}; 106 107const char *AcpiGbl_MaxDecode[] = 108{ 109 "MaxNotFixed", 110 "MaxFixed" 111}; 112 113const char *AcpiGbl_MemDecode[] = 114{ 115 "NonCacheable", 116 "Cacheable", 117 "WriteCombining", 118 "Prefetchable" 119}; 120 121const char *AcpiGbl_MinDecode[] = 122{ 123 "MinNotFixed", 124 "MinFixed" 125}; 126 127const char *AcpiGbl_MtpDecode[] = 128{ 129 "AddressRangeMemory", 130 "AddressRangeReserved", 131 "AddressRangeACPI", 132 "AddressRangeNVS" 133}; 134 135const char *AcpiGbl_PhyDecode[] = 136{ 137 "Type C", 138 "Type D", 139 "Unknown Type", 140 "Unknown Type" 141}; 142 143const char *AcpiGbl_RngDecode[] = 144{ 145 "InvalidRanges", 146 "NonISAOnlyRanges", 147 "ISAOnlyRanges", 148 "EntireRange" 149}; 150 151const char *AcpiGbl_RwDecode[] = 152{ 153 "ReadOnly", 154 "ReadWrite" 155}; 156 157const char *AcpiGbl_ShrDecode[] = 158{ 159 "Exclusive", 160 "Shared", 161 "ExclusiveAndWake", /* ACPI 5.0 */ 162 "SharedAndWake" /* ACPI 5.0 */ 163}; 164 165const char *AcpiGbl_SizDecode[] = 166{ 167 "Transfer8", 168 "Transfer8_16", 169 "Transfer16", 170 "InvalidSize" 171}; 172 173const char *AcpiGbl_TrsDecode[] = 174{ 175 "DenseTranslation", 176 "SparseTranslation" 177}; 178 179const char *AcpiGbl_TtpDecode[] = 180{ 181 "TypeStatic", 182 "TypeTranslation" 183}; 184 185const char *AcpiGbl_TypDecode[] = 186{ 187 "Compatibility", 188 "TypeA", 189 "TypeB", 190 "TypeF" 191}; 192 193const char *AcpiGbl_PpcDecode[] = 194{ 195 "PullDefault", 196 "PullUp", 197 "PullDown", 198 "PullNone" 199}; 200 201const char *AcpiGbl_IorDecode[] = 202{ 203 "IoRestrictionNone", 204 "IoRestrictionInputOnly", 205 "IoRestrictionOutputOnly", 206 "IoRestrictionNoneAndPreserve" 207}; 208 209const char *AcpiGbl_DtsDecode[] = 210{ 211 "Width8bit", 212 "Width16bit", 213 "Width32bit", 214 "Width64bit", 215 "Width128bit", 216 "Width256bit", 217}; 218 219/* GPIO connection type */ 220 221const char *AcpiGbl_CtDecode[] = 222{ 223 "Interrupt", 224 "I/O" 225}; 226 227/* Serial bus type */ 228 229const char *AcpiGbl_SbtDecode[] = 230{ 231 "/* UNKNOWN serial bus type */", 232 "I2C", 233 "SPI", 234 "UART", 235 "CSI2" 236}; 237 238/* I2C serial bus access mode */ 239 240const char *AcpiGbl_AmDecode[] = 241{ 242 "AddressingMode7Bit", 243 "AddressingMode10Bit" 244}; 245 246/* I2C serial bus slave mode */ 247 248const char *AcpiGbl_SmDecode[] = 249{ 250 "ControllerInitiated", 251 "DeviceInitiated" 252}; 253 254/* SPI serial bus wire mode */ 255 256const char *AcpiGbl_WmDecode[] = 257{ 258 "FourWireMode", 259 "ThreeWireMode" 260}; 261 262/* SPI serial clock phase */ 263 264const char *AcpiGbl_CphDecode[] = 265{ 266 "ClockPhaseFirst", 267 "ClockPhaseSecond" 268}; 269 270/* SPI serial bus clock polarity */ 271 272const char *AcpiGbl_CpoDecode[] = 273{ 274 "ClockPolarityLow", 275 "ClockPolarityHigh" 276}; 277 278/* SPI serial bus device polarity */ 279 280const char *AcpiGbl_DpDecode[] = 281{ 282 "PolarityLow", 283 "PolarityHigh" 284}; 285 286/* UART serial bus endian */ 287 288const char *AcpiGbl_EdDecode[] = 289{ 290 "LittleEndian", 291 "BigEndian" 292}; 293 294/* UART serial bus bits per byte */ 295 296const char *AcpiGbl_BpbDecode[] = 297{ 298 "DataBitsFive", 299 "DataBitsSix", 300 "DataBitsSeven", 301 "DataBitsEight", 302 "DataBitsNine", 303 "/* UNKNOWN Bits per byte */", 304 "/* UNKNOWN Bits per byte */", 305 "/* UNKNOWN Bits per byte */" 306}; 307 308/* UART serial bus stop bits */ 309 310const char *AcpiGbl_SbDecode[] = 311{ 312 "StopBitsZero", 313 "StopBitsOne", 314 "StopBitsOnePlusHalf", 315 "StopBitsTwo" 316}; 317 318/* UART serial bus flow control */ 319 320const char *AcpiGbl_FcDecode[] = 321{ 322 "FlowControlNone", 323 "FlowControlHardware", 324 "FlowControlXON", 325 "/* UNKNOWN flow control keyword */" 326}; 327 328/* UART serial bus parity type */ 329 330const char *AcpiGbl_PtDecode[] = 331{ 332 "ParityTypeNone", 333 "ParityTypeEven", 334 "ParityTypeOdd", 335 "ParityTypeMark", 336 "ParityTypeSpace", 337 "/* UNKNOWN parity keyword */", 338 "/* UNKNOWN parity keyword */", 339 "/* UNKNOWN parity keyword */" 340}; 341 342/* PinConfig type */ 343 344const char *AcpiGbl_PtypDecode[] = 345{ 346 "Default", 347 "Bias Pull-up", 348 "Bias Pull-down", 349 "Bias Default", 350 "Bias Disable", 351 "Bias High Impedance", 352 "Bias Bus Hold", 353 "Drive Open Drain", 354 "Drive Open Source", 355 "Drive Push Pull", 356 "Drive Strength", 357 "Slew Rate", 358 "Input Debounce", 359 "Input Schmitt Trigger", 360}; 361 362const char *AcpiGbl_ClockInputMode[] = 363{ 364 "Fixed", 365 "Variable", 366}; 367 368const char *AcpiGbl_ClockInputScale[] = 369{ 370 "Hz", 371 "KHz", 372 "MHz", 373}; 374 375#endif 376