if_ntwoc_pci.c revision 1.11
1/* $NetBSD: if_ntwoc_pci.c,v 1.11 2003/01/20 05:30:07 simonb Exp $ */ 2 3/* 4 * Copyright (c) 1998 Vixie Enterprises 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. Neither the name of Vixie Enterprises nor the names 17 * of its contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY VIXIE ENTERPRISES AND 21 * CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, 22 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 23 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 24 * DISCLAIMED. IN NO EVENT SHALL VIXIE ENTERPRISES OR 25 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 29 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 31 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 * 34 * This software has been written for Vixie Enterprises by Michael Graff 35 * <explorer@flame.org>. To learn more about Vixie Enterprises, see 36 * ``http://www.vix.com''. 37 */ 38 39#include <sys/cdefs.h> 40__KERNEL_RCSID(0, "$NetBSD: if_ntwoc_pci.c,v 1.11 2003/01/20 05:30:07 simonb Exp $"); 41 42#include <sys/param.h> 43#include <sys/systm.h> 44#include <sys/device.h> 45#include <sys/mbuf.h> 46#include <sys/socket.h> 47 48#include <net/if.h> 49 50#include <machine/cpu.h> 51#include <machine/bus.h> 52#include <machine/intr.h> 53 54#include <dev/pci/pcivar.h> 55#include <dev/pci/pcireg.h> 56#include <dev/pci/pcidevs.h> 57 58#include <dev/ic/hd64570reg.h> 59#include <dev/ic/hd64570var.h> 60 61#include <dev/pci/if_ntwoc_pcireg.h> 62 63#if 0 64#define NTWO_DEBUG 65#endif 66 67#ifdef NTWO_DEBUG 68#define NTWO_DPRINTF(x) printf x 69#else 70#define NTWO_DPRINTF(x) 71#endif 72 73/* 74 * buffers per tx and rx channels, per port, and the size of each. 75 * Don't use these constants directly, as they are really only hints. 76 * Use the calculated values stored in struct sca_softc instead. 77 * 78 * Each must be at least 2, receive would be better at around 20 or so. 79 * 80 * XXX Due to a damned near impossible to track down bug, transmit buffers 81 * MUST be 2, no more, no less. 82 */ 83#ifndef NTWOC_NtxBUFS 84#define NTWOC_NtxBUFS 40 85#endif 86#ifndef NTWOC_NrxBUFS 87#define NTWOC_NrxBUFS 20 88#endif 89 90#if __NetBSD_Version__ >= 104160000 91static void ntwoc_pci_config_interrupts __P((struct device *)); 92#else 93#define SCA_BASECLOCK 16000000 94#endif 95 96/* 97 * Card specific config register location 98 */ 99#define PCI_CBMA_ASIC 0x10 /* Configuration Base Memory Address */ 100#define PCI_CBMA_SCA 0x18 101 102struct ntwoc_pci_softc { 103 /* Generic device stuff */ 104 struct device sc_dev; /* Common to all devices */ 105 106 /* PCI chipset glue */ 107 pci_intr_handle_t *sc_ih; /* Interrupt handler */ 108 pci_chipset_tag_t sc_sr; /* PCI chipset handle */ 109 110 bus_space_tag_t sc_asic_iot; /* space cookie (for ASIC) */ 111 bus_space_handle_t sc_asic_ioh; /* bus space handle (for ASIC) */ 112 113 struct sca_softc sc_sca; /* the SCA itself */ 114}; 115 116static int ntwoc_pci_match __P((struct device *, struct cfdata *, void *)); 117static void ntwoc_pci_attach __P((struct device *, struct device *, void *)); 118 119static int ntwoc_pci_alloc_dma __P((struct sca_softc *)); 120static void ntwoc_pci_clock_callback __P((void *, int, int)); 121static void ntwoc_pci_dtr_callback __P((void *, int, int)); 122static void ntwoc_pci_get_clock __P((struct sca_port *, u_int8_t, u_int8_t, 123 u_int8_t, u_int8_t)); 124static int ntwoc_pci_intr __P((void *)); 125static void ntwoc_pci_setup_dma __P((struct sca_softc *)); 126static void ntwoc_pci_shutdown __P((void *sc)); 127 128CFATTACH_DECL(ntwoc_pci, sizeof(struct ntwoc_pci_softc), 129 ntwoc_pci_match, ntwoc_pci_attach, NULL, NULL); 130 131/* 132 * Names for daughter card types. These match the NTWOC_DB_* defines. 133 */ 134char *ntwoc_pci_db_names[] = { 135 "V.35", "Unknown 0x01", "Test", "Unknown 0x03", 136 "RS232", "Unknown 0x05", "RS422", "None" 137}; 138 139/* 140 * At least one implementation uses a somewhat strange register address 141 * mapping. If a card doesn't, define this to be a pass-through 142 * macro. (The ntwo driver needs this...) 143 */ 144#define SCA_REG(y) (((y) & 0x0002) ? (((y) & 0x00fd) + 0x100) : (y)) 145 146/* 147 * functions that read and write to the sca registers 148 */ 149static void 150ntwoc_pci_sca_write_1(struct sca_softc *sc, u_int reg, u_int8_t val) 151{ 152 bus_space_write_1(sc->sc_iot, sc->sc_ioh, SCA_REG(reg), val); 153} 154 155static void 156ntwoc_pci_sca_write_2(struct sca_softc *sc, u_int reg, u_int16_t val) 157{ 158 bus_space_write_2(sc->sc_iot, sc->sc_ioh, SCA_REG(reg), val); 159} 160 161static u_int8_t 162ntwoc_pci_sca_read_1(struct sca_softc *sc, u_int reg) 163{ 164 return 165 bus_space_read_1(sc->sc_iot, sc->sc_ioh, SCA_REG(reg)); 166} 167 168static u_int16_t 169ntwoc_pci_sca_read_2(struct sca_softc *sc, u_int reg) 170{ 171 return 172 bus_space_read_2(sc->sc_iot, sc->sc_ioh, SCA_REG(reg)); 173} 174 175 176 177static int 178ntwoc_pci_match(struct device *parent, struct cfdata *match, void *aux) 179{ 180 struct pci_attach_args *pa = (struct pci_attach_args *)aux; 181 182 if ((PCI_VENDOR(pa->pa_id) == PCI_VENDOR_RISCOM) 183 && (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_RISCOM_N2)) 184 return 1; 185 186 return 0; 187} 188 189static void 190ntwoc_pci_attach(struct device *parent, struct device *self, void *aux) 191{ 192 struct ntwoc_pci_softc *sc = (void *)self; 193 struct pci_attach_args *pa = aux; 194 struct sca_softc *sca = &sc->sc_sca; 195 pci_intr_handle_t ih; 196 const char *intrstr; 197 pcireg_t csr; 198 u_int8_t tmc, rdiv, tdiv; 199 u_int16_t frontend_cr; 200 u_int16_t db0, db1; 201 u_int32_t flags; 202 u_int numports; 203 204 printf(": N2 Serial Interface\n"); 205 flags = sc->sc_dev.dv_cfdata->cf_flags; 206 207 /* 208 * Map in the ASIC configuration space 209 */ 210 if (pci_mapreg_map(pa, PCI_CBMA_ASIC, PCI_MAPREG_TYPE_MEM, 0, 211 &sc->sc_asic_iot, &sc->sc_asic_ioh, NULL, NULL)) { 212 printf("%s: Can't map register space (ASIC)\n", 213 sc->sc_dev.dv_xname); 214 return; 215 } 216 /* 217 * Map in the serial controller configuration space 218 */ 219 if (pci_mapreg_map(pa, PCI_CBMA_SCA, PCI_MAPREG_TYPE_MEM, 0, 220 &sca->sc_iot, &sca->sc_ioh, NULL, NULL)) { 221 printf("%s: Can't map register space (SCA)\n", 222 sc->sc_dev.dv_xname); 223 return; 224 } 225 226 /* 227 * Enable the card 228 */ 229 csr = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); 230 pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, csr); 231 232 /* 233 * Map and establish the interrupt 234 */ 235 if (pci_intr_map(pa, &ih)) { 236 printf("%s: couldn't map interrupt\n", sc->sc_dev.dv_xname); 237 return; 238 } 239 intrstr = pci_intr_string(pa->pa_pc, ih); 240 sc->sc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_NET, ntwoc_pci_intr, 241 sc); 242 if (sc->sc_ih == NULL) { 243 printf("%s: couldn't establish interrupt", 244 sc->sc_dev.dv_xname); 245 if (intrstr != NULL) 246 printf(" at %s", intrstr); 247 printf("\n"); 248 return; 249 } 250 printf("%s: interrupting at %s\n", sc->sc_dev.dv_xname, intrstr); 251 252 /* 253 * Perform total black magic. This is not only extremely 254 * disgusting, but it should be explained a lot more in the 255 * card's documentation. 256 * 257 * From what I gather, this does nothing more than configure the 258 * PCI to ISA translator ASIC the N2pci card uses. 259 * 260 * From the FreeBSD driver: 261 * offset 262 * 0x00 - Map Range - Mem-mapped to locate anywhere 263 * 0x04 - Re-Map - PCI address decode enable 264 * 0x18 - Bus Region - 32-bit bus, ready enable 265 * 0x1c - Master Range - include all 16 MB 266 * 0x20 - Master RAM - Map SCA Base at 0 267 * 0x28 - Master Remap - direct master memory enable 268 * 0x68 - Interrupt - Enable interrupt (0 to disable) 269 */ 270 bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh, 271 0x00, 0xfffff000); 272 bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh, 273 0x04, 1); 274 bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh, 275 0x18, 0x40030043); 276 bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh, 277 0x1c, 0xff000000); 278 bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh, 279 0x20, 0); 280 bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh, 281 0x28, 0xe9); 282 bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh, 283 0x68, 0x10900); 284 285 /* 286 * pass the dma tag to the SCA 287 */ 288 sca->sc_usedma = 1; 289 sca->scu_dmat = pa->pa_dmat; 290 291 /* 292 * Read the configuration information off the daughter card. 293 */ 294 frontend_cr = bus_space_read_2(sca->sc_iot, sca->sc_ioh, NTWOC_FECR); 295 NTWO_DPRINTF(("%s: frontend_cr = 0x%04x\n", 296 sc->sc_dev.dv_xname, frontend_cr)); 297 298 db0 = (frontend_cr & NTWOC_FECR_ID0) >> NTWOC_FECR_ID0_SHIFT; 299 db1 = (frontend_cr & NTWOC_FECR_ID1) >> NTWOC_FECR_ID1_SHIFT; 300 301 /* 302 * Port 1 HAS to be present. If it isn't, don't attach anything. 303 */ 304 if (db0 == NTWOC_FE_ID_NONE) { 305 printf("%s: no ports available\n", sc->sc_dev.dv_xname); 306 return; 307 } 308 309 /* 310 * Port 1 is present. Now, check to see if port 2 is also 311 * present. 312 */ 313 numports = 1; 314 if (db1 != NTWOC_FE_ID_NONE) 315 numports++; 316 317 printf("%s: %d port%s\n", sc->sc_dev.dv_xname, numports, 318 (numports > 1 ? "s" : "")); 319 printf("%s: port 0 interface card: %s\n", sc->sc_dev.dv_xname, 320 ntwoc_pci_db_names[db0]); 321 if (numports > 1) 322 printf("%s: port 1 interface card: %s\n", sc->sc_dev.dv_xname, 323 ntwoc_pci_db_names[db1]); 324 325 /* 326 * enable the RS422 tristate transmit 327 * diable clock output (use receiver clock for both) 328 */ 329 frontend_cr |= (NTWOC_FECR_TE0 | NTWOC_FECR_TE1); 330 frontend_cr &= ~(NTWOC_FECR_ETC0 | NTWOC_FECR_ETC1); 331 bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh, 332 NTWOC_FECR, frontend_cr); 333 334 /* 335 * initialize the SCA. This will allocate DMAable memory based 336 * on the number of ports we passed in, the size of each 337 * buffer, and the number of buffers per port. 338 */ 339 sca->sc_parent = &sc->sc_dev; 340 sca->sc_read_1 = ntwoc_pci_sca_read_1; 341 sca->sc_read_2 = ntwoc_pci_sca_read_2; 342 sca->sc_write_1 = ntwoc_pci_sca_write_1; 343 sca->sc_write_2 = ntwoc_pci_sca_write_2; 344 sca->sc_dtr_callback = ntwoc_pci_dtr_callback; 345 sca->sc_clock_callback = ntwoc_pci_clock_callback; 346 sca->sc_aux = sc; 347 sca->sc_numports = numports; 348 349 /* 350 * get clock information from user 351 */ 352 rdiv = (flags & NTWOC_FLAGS_RXDIV_MASK) >> NTWOC_FLAGS_RXDIV_SHIFT; 353 if (rdiv > 9) 354 panic("bad rx divisor in flags"); 355 356 tdiv = (flags & NTWOC_FLAGS_TXDIV_MASK) >> NTWOC_FLAGS_TXDIV_SHIFT; 357 if (tdiv > 9) 358 panic("bad tx divisor in flags"); 359 tmc = (flags & NTWOC_FLAGS_TMC_MASK) >> NTWOC_FLAGS_TMC_SHIFT; 360 361 ntwoc_pci_get_clock(&sca->sc_ports[0], flags & NTWOC_FLAGS_CLK0_MASK, 362 tmc, rdiv, tdiv); 363 if (sca->sc_numports > 1) 364 ntwoc_pci_get_clock(&sca->sc_ports[1], 365 (flags & NTWOC_FLAGS_CLK1_MASK) >> NTWOC_FLAGS_CLK1_SHIFT, 366 tmc, rdiv, tdiv); 367 368 /* allocate dma'able memory for card to use */ 369 ntwoc_pci_alloc_dma(sca); 370 ntwoc_pci_setup_dma(sca); 371 372 sca_init(sca); 373 374 /* 375 * always initialize port 0, since we have to have found it to 376 * get this far. If we have two ports, attach the second 377 * as well. 378 */ 379 sca_port_attach(sca, 0); 380 if (numports == 2) 381 sca_port_attach(sca, 1); 382 383 /* 384 * Add shutdown hook so that DMA is disabled prior to reboot. Not 385 * doing do could allow DMA to corrupt kernel memory during the 386 * reboot before the driver initializes. 387 */ 388 shutdownhook_establish(ntwoc_pci_shutdown, sc); 389 390#if __NetBSD_Version__ >= 104160000 391 /* 392 * defer getting the base clock until interrupts are enabled 393 * (and thus we have microtime()) 394 */ 395 config_interrupts(self, ntwoc_pci_config_interrupts); 396#else 397 sca->sc_baseclock = SCA_BASECLOCK; 398 sca_print_clock_info(&sc->sc_sca); 399#endif 400} 401 402/* 403 * extract the clock information for a port from the flags field 404 */ 405static void 406ntwoc_pci_get_clock(struct sca_port *scp, u_int8_t flags, u_int8_t tmc, 407 u_int8_t rdiv, u_int8_t tdiv) 408{ 409 scp->sp_eclock = 410 (flags & NTWOC_FLAGS_ECLOCK_MASK) >> NTWOC_FLAGS_ECLOCK_SHIFT; 411 scp->sp_rxs = rdiv; 412 scp->sp_txs = tdiv; 413 scp->sp_tmc = tmc; 414 415 /* get rx source */ 416 switch ((flags & NTWOC_FLAGS_RXS_MASK) >> NTWOC_FLAGS_RXS_SHIFT) { 417 case NTWOC_FLAGS_RXS_LINE: 418 scp->sp_rxs = 0; 419 break; 420 case NTWOC_FLAGS_RXS_LINE_SN: 421 scp->sp_rxs |= SCA_RXS_CLK_LINE_SN; 422 break; 423 case NTWOC_FLAGS_RXS_INTERNAL: 424 scp->sp_rxs |= SCA_RXS_CLK_INTERNAL; 425 break; 426 case NTWOC_FLAGS_RXS_ADPLL_OUT: 427 scp->sp_rxs |= SCA_RXS_CLK_ADPLL_OUT; 428 break; 429 case NTWOC_FLAGS_RXS_ADPLL_IN: 430 scp->sp_rxs |= SCA_RXS_CLK_ADPLL_IN; 431 break; 432 default: 433 panic("bad rx source in flags"); 434 } 435 436 /* get tx source */ 437 switch ((flags & NTWOC_FLAGS_TXS_MASK) >> NTWOC_FLAGS_TXS_SHIFT) { 438 case NTWOC_FLAGS_TXS_LINE: 439 scp->sp_txs = 0; 440 break; 441 case NTWOC_FLAGS_TXS_INTERNAL: 442 scp->sp_txs |= SCA_TXS_CLK_INTERNAL; 443 break; 444 case NTWOC_FLAGS_TXS_RXCLOCK: 445 scp->sp_txs |= SCA_TXS_CLK_RXCLK; 446 break; 447 default: 448 panic("bad rx source in flags"); 449 } 450} 451 452 453static int 454ntwoc_pci_intr(void *arg) 455{ 456 struct ntwoc_pci_softc *sc = (struct ntwoc_pci_softc *)arg; 457 458 return sca_hardintr(&sc->sc_sca); 459} 460 461/* 462 * shut down interrupts and DMA, so we don't trash the kernel on warm 463 * boot. Also, lower DTR on each port and disable card interrupts. 464 */ 465static void 466ntwoc_pci_shutdown(void *aux) 467{ 468 struct ntwoc_pci_softc *sc = aux; 469 u_int16_t fecr; 470 471 /* 472 * shut down the SCA ports 473 */ 474 sca_shutdown(&sc->sc_sca); 475 476 /* 477 * disable interrupts for the whole card. Black magic, see comment 478 * above. 479 */ 480 bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh, 481 0x68, 0x10900); 482 483 /* 484 * lower DTR on both ports 485 */ 486 fecr = bus_space_read_2(sc->sc_sca.sc_iot, 487 sc->sc_sca.sc_ioh, NTWOC_FECR); 488 fecr |= (NTWOC_FECR_DTR0 | NTWOC_FECR_DTR1); 489 bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh, 490 NTWOC_FECR, fecr); 491} 492 493static void 494ntwoc_pci_dtr_callback(void *aux, int port, int state) 495{ 496 struct ntwoc_pci_softc *sc = aux; 497 u_int16_t fecr; 498 499 fecr = bus_space_read_2(sc->sc_sca.sc_iot, 500 sc->sc_sca.sc_ioh, NTWOC_FECR); 501 502 NTWO_DPRINTF(("dtr: port == %d, state == %d, old fecr: 0x%04x\n", 503 port, state, fecr)); 504 505 if (port == 0) { 506 if (state == 0) 507 fecr |= NTWOC_FECR_DTR0; 508 else 509 fecr &= ~NTWOC_FECR_DTR0; 510 } else { 511 if (state == 0) 512 fecr |= NTWOC_FECR_DTR1; 513 else 514 fecr &= ~NTWOC_FECR_DTR1; 515 } 516 517 NTWO_DPRINTF(("new fecr: 0x%04x\n", fecr)); 518 519 bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh, 520 NTWOC_FECR, fecr); 521} 522 523static void 524ntwoc_pci_clock_callback(void *aux, int port, int enable) 525{ 526 struct ntwoc_pci_softc *sc = aux; 527 u_int16_t fecr; 528 529 fecr = bus_space_read_2(sc->sc_sca.sc_iot, 530 sc->sc_sca.sc_ioh, NTWOC_FECR); 531 532 NTWO_DPRINTF(("clk: port == %d, enable == %d, old fecr: 0x%04x\n", 533 port, enable, fecr)); 534 535 if (port == 0) { 536 if (enable) 537 fecr |= NTWOC_FECR_ETC0; 538 else 539 fecr &= ~NTWOC_FECR_ETC0; 540 } else { 541 if (enable) 542 fecr |= NTWOC_FECR_ETC1; 543 else 544 fecr &= ~NTWOC_FECR_ETC1; 545 } 546 547 NTWO_DPRINTF(("new fecr: 0x%04x\n", fecr)); 548 549 bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh, 550 NTWOC_FECR, fecr); 551} 552 553static int 554ntwoc_pci_alloc_dma(struct sca_softc *sc) 555{ 556 u_int allocsize; 557 int err; 558 int rsegs; 559 u_int bpp; 560 561 /* first initialize the number of descriptors */ 562 sc->sc_ports[0].sp_nrxdesc = NTWOC_NrxBUFS; 563 sc->sc_ports[0].sp_ntxdesc = NTWOC_NtxBUFS; 564 if (sc->sc_numports == 2) { 565 sc->sc_ports[1].sp_nrxdesc = NTWOC_NrxBUFS; 566 sc->sc_ports[1].sp_ntxdesc = NTWOC_NtxBUFS; 567 } 568 569 NTWO_DPRINTF(("sizeof sca_desc_t: %d bytes\n", sizeof (sca_desc_t))); 570 571 bpp = sc->sc_numports * (NTWOC_NtxBUFS + NTWOC_NrxBUFS); 572 573 allocsize = bpp * (SCA_BSIZE + sizeof (sca_desc_t)); 574 575 /* 576 * sanity checks: 577 * 578 * Check the total size of the data buffers, and so on. The total 579 * DMAable space needs to fit within a single 16M region, and the 580 * descriptors need to fit within a 64K region. 581 */ 582 if (allocsize > 16 * 1024 * 1024) 583 return 1; 584 if (bpp * sizeof (sca_desc_t) > 64 * 1024) 585 return 1; 586 587 sc->scu_allocsize = allocsize; 588 589 /* 590 * Allocate one huge chunk of memory. 591 */ 592 if (bus_dmamem_alloc(sc->scu_dmat, 593 allocsize, 594 SCA_DMA_ALIGNMENT, 595 SCA_DMA_BOUNDRY, 596 &sc->scu_seg, 1, &rsegs, BUS_DMA_NOWAIT) != 0) { 597 printf("Could not allocate DMA memory\n"); 598 return 1; 599 } 600 NTWO_DPRINTF(("DMA memory allocated: %d bytes\n", allocsize)); 601 602 if (bus_dmamem_map(sc->scu_dmat, &sc->scu_seg, 1, allocsize, 603 &sc->scu_dma_addr, BUS_DMA_NOWAIT) != 0) { 604 printf("Could not map DMA memory into kernel space\n"); 605 return 1; 606 } 607 NTWO_DPRINTF(("DMA memory mapped\n")); 608 609 if (bus_dmamap_create(sc->scu_dmat, allocsize, 2, 610 allocsize, SCA_DMA_BOUNDRY, 611 BUS_DMA_NOWAIT, &sc->scu_dmam) != 0) { 612 printf("Could not create DMA map\n"); 613 return 1; 614 } 615 NTWO_DPRINTF(("DMA map created\n")); 616 617 err = bus_dmamap_load(sc->scu_dmat, sc->scu_dmam, sc->scu_dma_addr, 618 allocsize, NULL, BUS_DMA_NOWAIT); 619 if (err != 0) { 620 printf("Could not load DMA segment: %d\n", err); 621 return 1; 622 } 623 NTWO_DPRINTF(("DMA map loaded\n")); 624 625 return 0; 626} 627 628/* 629 * Take the memory allocated with sca_alloc_dma() and divide it among the 630 * two ports. 631 */ 632static void 633ntwoc_pci_setup_dma(struct sca_softc *sc) 634{ 635 sca_port_t *scp0, *scp1; 636 u_int8_t *vaddr0; 637 u_int32_t paddr0; 638 u_long addroff; 639 640 /* 641 * remember the physical address to 24 bits only, since the upper 642 * 8 bits is programed into the device at a different layer. 643 */ 644 paddr0 = (sc->scu_dmam->dm_segs[0].ds_addr & 0x00ffffff); 645 vaddr0 = sc->scu_dma_addr; 646 647 /* 648 * if we have only one port it gets the full range. If we have 649 * two we need to do a little magic to divide things up. 650 * 651 * The descriptors will all end up in the front of the area, while 652 * the remainder of the buffer is used for transmit and receive 653 * data. 654 * 655 * -------------------- start of memory 656 * tx desc port 0 657 * rx desc port 0 658 * tx desc port 1 659 * rx desc port 1 660 * tx buffer port 0 661 * rx buffer port 0 662 * tx buffer port 1 663 * rx buffer port 1 664 * -------------------- end of memory 665 */ 666 scp0 = &sc->sc_ports[0]; 667 scp1 = &sc->sc_ports[1]; 668 669 scp0->sp_txdesc_p = paddr0; 670 scp0->sp_txdesc = (sca_desc_t *)vaddr0; 671 addroff = sizeof(sca_desc_t) * scp0->sp_ntxdesc; 672 673 /* 674 * point to the range following the tx descriptors, and 675 * set the rx descriptors there. 676 */ 677 scp0->sp_rxdesc_p = paddr0 + addroff; 678 scp0->sp_rxdesc = (sca_desc_t *)(vaddr0 + addroff); 679 addroff += sizeof(sca_desc_t) * scp0->sp_nrxdesc; 680 681 if (sc->sc_numports == 2) { 682 scp1->sp_txdesc_p = paddr0 + addroff; 683 scp1->sp_txdesc = (sca_desc_t *)(vaddr0 + addroff); 684 addroff += sizeof(sca_desc_t) * scp1->sp_ntxdesc; 685 686 scp1->sp_rxdesc_p = paddr0 + addroff; 687 scp1->sp_rxdesc = (sca_desc_t *)(vaddr0 + addroff); 688 addroff += sizeof(sca_desc_t) * scp1->sp_nrxdesc; 689 } 690 691 /* 692 * point to the memory following the descriptors, and set the 693 * transmit buffer there. 694 */ 695 scp0->sp_txbuf_p = paddr0 + addroff; 696 scp0->sp_txbuf = vaddr0 + addroff; 697 addroff += SCA_BSIZE * scp0->sp_ntxdesc; 698 699 /* 700 * lastly, skip over the transmit buffer and set up pointers into 701 * the receive buffer. 702 */ 703 scp0->sp_rxbuf_p = paddr0 + addroff; 704 scp0->sp_rxbuf = vaddr0 + addroff; 705 addroff += SCA_BSIZE * scp0->sp_nrxdesc; 706 707 if (sc->sc_numports == 2) { 708 scp1->sp_txbuf_p = paddr0 + addroff; 709 scp1->sp_txbuf = vaddr0 + addroff; 710 addroff += SCA_BSIZE * scp1->sp_ntxdesc; 711 712 scp1->sp_rxbuf_p = paddr0 + addroff; 713 scp1->sp_rxbuf = vaddr0 + addroff; 714 addroff += SCA_BSIZE * scp1->sp_nrxdesc; 715 } 716 717 /* 718 * as a consistancy check, addroff should be equal to the allocation 719 * size. 720 */ 721 if (sc->scu_allocsize != addroff) 722 printf("ERROR: scu_allocsize != addroff: %lu != %lu\n", 723 (u_long)sc->scu_allocsize, addroff); 724} 725 726#if __NetBSD_Version__ >= 104160000 727static void 728ntwoc_pci_config_interrupts(self) 729 struct device *self; 730{ 731 struct ntwoc_pci_softc *sc; 732 733 sc = (void *)self; 734 sca_get_base_clock(&sc->sc_sca); 735 sca_print_clock_info(&sc->sc_sca); 736} 737#endif 738