cs4281.c revision 1.52
1/*	$NetBSD: cs4281.c,v 1.52 2016/07/07 06:55:41 msaitoh Exp $	*/
2
3/*
4 * Copyright (c) 2000 Tatoku Ogaito.  All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 *    notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 *    notice, this list of conditions and the following disclaimer in the
13 *    documentation and/or other materials provided with the distribution.
14 * 3. All advertising materials mentioning features or use of this software
15 *    must display the following acknowledgement:
16 *      This product includes software developed by Tatoku Ogaito
17 *	for the NetBSD Project.
18 * 4. The name of the author may not be used to endorse or promote products
19 *    derived from this software without specific prior written permission
20 *
21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33/*
34 * Cirrus Logic CS4281 driver.
35 * Data sheets can be found
36 * http://www.cirrus.com/ftp/pub/4281.pdf
37 * ftp://ftp.alsa-project.org/pub/manuals/cirrus/cs4281tm.pdf
38 *
39 * TODO:
40 *   1: midi and FM support
41 *   2: ...
42 *
43 */
44
45#include <sys/cdefs.h>
46__KERNEL_RCSID(0, "$NetBSD: cs4281.c,v 1.52 2016/07/07 06:55:41 msaitoh Exp $");
47
48#include <sys/param.h>
49#include <sys/systm.h>
50#include <sys/kernel.h>
51#include <sys/malloc.h>
52#include <sys/fcntl.h>
53#include <sys/device.h>
54#include <sys/systm.h>
55
56#include <dev/pci/pcidevs.h>
57#include <dev/pci/pcivar.h>
58#include <dev/pci/cs4281reg.h>
59#include <dev/pci/cs428xreg.h>
60
61#include <sys/audioio.h>
62#include <dev/audio_if.h>
63#include <dev/midi_if.h>
64#include <dev/mulaw.h>
65#include <dev/auconv.h>
66
67#include <dev/ic/ac97reg.h>
68#include <dev/ic/ac97var.h>
69
70#include <dev/pci/cs428x.h>
71
72#include <sys/bus.h>
73
74#if defined(ENABLE_SECONDARY_CODEC)
75#define MAX_CHANNELS  (4)
76#define MAX_FIFO_SIZE 32 /* 128/4channels */
77#else
78#define MAX_CHANNELS  (2)
79#define MAX_FIFO_SIZE 64 /* 128/2channels */
80#endif
81
82/* IF functions for audio driver */
83static int	cs4281_match(device_t, cfdata_t, void *);
84static void	cs4281_attach(device_t, device_t, void *);
85static int	cs4281_intr(void *);
86static int	cs4281_query_encoding(void *, struct audio_encoding *);
87static int	cs4281_set_params(void *, int, int, audio_params_t *,
88				  audio_params_t *, stream_filter_list_t *,
89				  stream_filter_list_t *);
90static int	cs4281_halt_output(void *);
91static int	cs4281_halt_input(void *);
92static int	cs4281_getdev(void *, struct audio_device *);
93static int	cs4281_trigger_output(void *, void *, void *, int,
94				      void (*)(void *), void *,
95				      const audio_params_t *);
96static int	cs4281_trigger_input(void *, void *, void *, int,
97				     void (*)(void *), void *,
98				     const audio_params_t *);
99
100static int	cs4281_reset_codec(void *);
101
102/* Internal functions */
103static uint8_t	cs4281_sr2regval(int);
104static void	cs4281_set_dac_rate(struct cs428x_softc *, int);
105static void	cs4281_set_adc_rate(struct cs428x_softc *, int);
106static int      cs4281_init(struct cs428x_softc *, int);
107
108/* Power Management */
109static bool	cs4281_suspend(device_t, const pmf_qual_t *);
110static bool	cs4281_resume(device_t, const pmf_qual_t *);
111
112static const struct audio_hw_if cs4281_hw_if = {
113	NULL,			/* open */
114	NULL,			/* close */
115	NULL,
116	cs4281_query_encoding,
117	cs4281_set_params,
118	cs428x_round_blocksize,
119	NULL,
120	NULL,
121	NULL,
122	NULL,
123	NULL,
124	cs4281_halt_output,
125	cs4281_halt_input,
126	NULL,
127	cs4281_getdev,
128	NULL,
129	cs428x_mixer_set_port,
130	cs428x_mixer_get_port,
131	cs428x_query_devinfo,
132	cs428x_malloc,
133	cs428x_free,
134	cs428x_round_buffersize,
135	cs428x_mappage,
136	cs428x_get_props,
137	cs4281_trigger_output,
138	cs4281_trigger_input,
139	NULL,
140	cs428x_get_locks,
141};
142
143#if NMIDI > 0 && 0
144/* Midi Interface */
145static void	cs4281_midi_close(void*);
146static void	cs4281_midi_getinfo(void *, struct midi_info *);
147static int	cs4281_midi_open(void *, int, void (*)(void *, int),
148			 void (*)(void *), void *);
149static int	cs4281_midi_output(void *, int);
150
151static const struct midi_hw_if cs4281_midi_hw_if = {
152	cs4281_midi_open,
153	cs4281_midi_close,
154	cs4281_midi_output,
155	cs4281_midi_getinfo,
156	0,
157	cs428x_get_locks,
158};
159#endif
160
161CFATTACH_DECL_NEW(clct, sizeof(struct cs428x_softc),
162    cs4281_match, cs4281_attach, NULL, NULL);
163
164static struct audio_device cs4281_device = {
165	"CS4281",
166	"",
167	"cs4281"
168};
169
170
171static int
172cs4281_match(device_t parent, cfdata_t match, void *aux)
173{
174	struct pci_attach_args *pa;
175
176	pa = (struct pci_attach_args *)aux;
177	if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_CIRRUS)
178		return 0;
179	if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_CIRRUS_CS4281)
180		return 1;
181	return 0;
182}
183
184static void
185cs4281_attach(device_t parent, device_t self, void *aux)
186{
187	struct cs428x_softc *sc;
188	struct pci_attach_args *pa;
189	pci_chipset_tag_t pc;
190	char const *intrstr;
191	pcireg_t reg;
192	int error;
193	char intrbuf[PCI_INTRSTR_LEN];
194
195	sc = device_private(self);
196	sc->sc_dev = self;
197	pa = (struct pci_attach_args *)aux;
198	pc = pa->pa_pc;
199
200	pci_aprint_devinfo(pa, "Audio controller");
201
202	sc->sc_pc = pa->pa_pc;
203	sc->sc_pt = pa->pa_tag;
204
205	/* Map I/O register */
206	if (pci_mapreg_map(pa, PCI_BA0,
207	    PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0,
208	    &sc->ba0t, &sc->ba0h, NULL, NULL)) {
209		aprint_error_dev(sc->sc_dev, "can't map BA0 space\n");
210		return;
211	}
212	if (pci_mapreg_map(pa, PCI_BA1,
213	    PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0,
214	    &sc->ba1t, &sc->ba1h, NULL, NULL)) {
215		aprint_error_dev(sc->sc_dev, "can't map BA1 space\n");
216		return;
217	}
218
219	sc->sc_dmatag = pa->pa_dmat;
220
221	/* power up chip */
222	if ((error = pci_activate(pa->pa_pc, pa->pa_tag, self,
223	    pci_activate_null)) && error != EOPNOTSUPP) {
224		aprint_error_dev(sc->sc_dev, "cannot activate %d\n", error);
225		return;
226	}
227
228	/* Enable the device (set bus master flag) */
229	reg = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
230	pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
231	    reg | PCI_COMMAND_MASTER_ENABLE);
232
233#if 0
234	/* LATENCY_TIMER setting */
235	temp1 = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG);
236	if (PCI_LATTIMER(temp1) < 32) {
237		temp1 &= 0xffff00ff;
238		temp1 |= 0x00002000;
239		pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG, temp1);
240	}
241#endif
242
243	/* Map and establish the interrupt. */
244	if (pci_intr_map(pa, &sc->intrh)) {
245		aprint_error_dev(sc->sc_dev, "couldn't map interrupt\n");
246		return;
247	}
248	intrstr = pci_intr_string(pc, sc->intrh, intrbuf, sizeof(intrbuf));
249
250	mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_NONE);
251	mutex_init(&sc->sc_intr_lock, MUTEX_DEFAULT, IPL_AUDIO);
252
253	sc->sc_ih = pci_intr_establish(sc->sc_pc, sc->intrh, IPL_AUDIO,
254	    cs4281_intr, sc);
255	if (sc->sc_ih == NULL) {
256		aprint_error_dev(sc->sc_dev, "couldn't establish interrupt");
257		if (intrstr != NULL)
258			aprint_error(" at %s", intrstr);
259		aprint_error("\n");
260		mutex_destroy(&sc->sc_lock);
261		mutex_destroy(&sc->sc_intr_lock);
262		return;
263	}
264	aprint_normal_dev(sc->sc_dev, "interrupting at %s\n", intrstr);
265
266	/*
267	 * Sound System start-up
268	 */
269	if (cs4281_init(sc, 1) != 0) {
270		mutex_destroy(&sc->sc_lock);
271		mutex_destroy(&sc->sc_intr_lock);
272		return;
273	}
274
275	sc->type = TYPE_CS4281;
276	sc->halt_input  = cs4281_halt_input;
277	sc->halt_output = cs4281_halt_output;
278
279	sc->dma_size     = CS4281_BUFFER_SIZE / MAX_CHANNELS;
280	sc->dma_align    = 0x10;
281	sc->hw_blocksize = sc->dma_size / 2;
282
283	/* AC 97 attachment */
284	sc->host_if.arg = sc;
285	sc->host_if.attach = cs428x_attach_codec;
286	sc->host_if.read   = cs428x_read_codec;
287	sc->host_if.write  = cs428x_write_codec;
288	sc->host_if.reset  = cs4281_reset_codec;
289	if (ac97_attach(&sc->host_if, self, &sc->sc_lock) != 0) {
290		aprint_error_dev(sc->sc_dev, "ac97_attach failed\n");
291		mutex_destroy(&sc->sc_lock);
292		mutex_destroy(&sc->sc_intr_lock);
293		return;
294	}
295	audio_attach_mi(&cs4281_hw_if, sc, sc->sc_dev);
296
297#if NMIDI > 0 && 0
298	midi_attach_mi(&cs4281_midi_hw_if, sc, sc->sc_dev);
299#endif
300
301	if (!pmf_device_register(self, cs4281_suspend, cs4281_resume))
302		aprint_error_dev(self, "couldn't establish power handler\n");
303}
304
305static int
306cs4281_intr(void *p)
307{
308	struct cs428x_softc *sc;
309	uint32_t intr, hdsr0, hdsr1;
310	char *empty_dma;
311	int handled;
312
313	sc = p;
314	handled = 0;
315	hdsr0 = 0;
316	hdsr1 = 0;
317
318	mutex_spin_enter(&sc->sc_intr_lock);
319
320	/* grab interrupt register */
321	intr = BA0READ4(sc, CS4281_HISR);
322
323	DPRINTF(("cs4281_intr:"));
324	/* not for me */
325	if ((intr & HISR_INTENA) == 0) {
326		/* clear the interrupt register */
327		BA0WRITE4(sc, CS4281_HICR, HICR_CHGM | HICR_IEV);
328		mutex_spin_exit(&sc->sc_intr_lock);
329		return 0;
330	}
331
332	if (intr & HISR_DMA0)
333		hdsr0 = BA0READ4(sc, CS4281_HDSR0); /* clear intr condition */
334	if (intr & HISR_DMA1)
335		hdsr1 = BA0READ4(sc, CS4281_HDSR1); /* clear intr condition */
336	/* clear the interrupt register */
337	BA0WRITE4(sc, CS4281_HICR, HICR_CHGM | HICR_IEV);
338
339#ifdef CS4280_DEBUG
340	DPRINTF(("intr = 0x%08x, hdsr0 = 0x%08x hdsr1 = 0x%08x\n",
341		 intr, hdsr0, hdsr1));
342#else
343	__USE(hdsr0);
344	__USE(hdsr1);
345#endif
346
347	/* Playback Interrupt */
348	if (intr & HISR_DMA0) {
349		handled = 1;
350		if (sc->sc_prun) {
351			DPRINTF((" PB DMA 0x%x(%d)",
352				(int)BA0READ4(sc, CS4281_DCA0),
353				(int)BA0READ4(sc, CS4281_DCC0)));
354			if ((sc->sc_pi%sc->sc_pcount) == 0)
355				sc->sc_pintr(sc->sc_parg);
356			/* copy buffer */
357			++sc->sc_pi;
358			empty_dma = sc->sc_pdma->addr;
359			if (sc->sc_pi&1)
360				empty_dma += sc->hw_blocksize;
361			memcpy(empty_dma, sc->sc_pn, sc->hw_blocksize);
362			sc->sc_pn += sc->hw_blocksize;
363			if (sc->sc_pn >= sc->sc_pe)
364				sc->sc_pn = sc->sc_ps;
365		} else {
366			aprint_error_dev(sc->sc_dev, "unexpected play intr\n");
367		}
368	}
369	if (intr & HISR_DMA1) {
370		handled = 1;
371		if (sc->sc_rrun) {
372			/* copy from DMA */
373			DPRINTF((" CP DMA 0x%x(%d)", (int)BA0READ4(sc, CS4281_DCA1),
374				(int)BA0READ4(sc, CS4281_DCC1)));
375			++sc->sc_ri;
376			empty_dma = sc->sc_rdma->addr;
377			if ((sc->sc_ri & 1) == 0)
378				empty_dma += sc->hw_blocksize;
379			memcpy(sc->sc_rn, empty_dma, sc->hw_blocksize);
380			sc->sc_rn += sc->hw_blocksize;
381			if (sc->sc_rn >= sc->sc_re)
382				sc->sc_rn = sc->sc_rs;
383			if ((sc->sc_ri % sc->sc_rcount) == 0)
384				sc->sc_rintr(sc->sc_rarg);
385		} else {
386			aprint_error_dev(sc->sc_dev,
387			    "unexpected record intr\n");
388		}
389	}
390	DPRINTF(("\n"));
391
392	mutex_spin_exit(&sc->sc_intr_lock);
393
394	return handled;
395}
396
397static int
398cs4281_query_encoding(void *addr, struct audio_encoding *fp)
399{
400
401	switch (fp->index) {
402	case 0:
403		strcpy(fp->name, AudioEulinear);
404		fp->encoding = AUDIO_ENCODING_ULINEAR;
405		fp->precision = 8;
406		fp->flags = 0;
407		break;
408	case 1:
409		strcpy(fp->name, AudioEmulaw);
410		fp->encoding = AUDIO_ENCODING_ULAW;
411		fp->precision = 8;
412		fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
413		break;
414	case 2:
415		strcpy(fp->name, AudioEalaw);
416		fp->encoding = AUDIO_ENCODING_ALAW;
417		fp->precision = 8;
418		fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
419		break;
420	case 3:
421		strcpy(fp->name, AudioEslinear);
422		fp->encoding = AUDIO_ENCODING_SLINEAR;
423		fp->precision = 8;
424		fp->flags = 0;
425		break;
426	case 4:
427		strcpy(fp->name, AudioEslinear_le);
428		fp->encoding = AUDIO_ENCODING_SLINEAR_LE;
429		fp->precision = 16;
430		fp->flags = 0;
431		break;
432	case 5:
433		strcpy(fp->name, AudioEulinear_le);
434		fp->encoding = AUDIO_ENCODING_ULINEAR_LE;
435		fp->precision = 16;
436		fp->flags = 0;
437		break;
438	case 6:
439		strcpy(fp->name, AudioEslinear_be);
440		fp->encoding = AUDIO_ENCODING_SLINEAR_BE;
441		fp->precision = 16;
442		fp->flags = 0;
443		break;
444	case 7:
445		strcpy(fp->name, AudioEulinear_be);
446		fp->encoding = AUDIO_ENCODING_ULINEAR_BE;
447		fp->precision = 16;
448		fp->flags = 0;
449		break;
450	default:
451		return EINVAL;
452	}
453	return 0;
454}
455
456static int
457cs4281_set_params(void *addr, int setmode, int usemode,
458    audio_params_t *play, audio_params_t *rec, stream_filter_list_t *pfil,
459    stream_filter_list_t *rfil)
460{
461	audio_params_t hw;
462	struct cs428x_softc *sc;
463	audio_params_t *p;
464	stream_filter_list_t *fil;
465	int mode;
466
467	sc = addr;
468	for (mode = AUMODE_RECORD; mode != -1;
469	    mode = mode == AUMODE_RECORD ? AUMODE_PLAY : -1) {
470		if ((setmode & mode) == 0)
471			continue;
472
473		p = mode == AUMODE_PLAY ? play : rec;
474
475		if (p == play) {
476			DPRINTFN(5,
477			    ("play: sample=%u precision=%u channels=%u\n",
478			    p->sample_rate, p->precision, p->channels));
479			if (p->sample_rate < 6023 || p->sample_rate > 48000 ||
480			    (p->precision != 8 && p->precision != 16) ||
481			    (p->channels != 1  && p->channels != 2)) {
482				return EINVAL;
483			}
484		} else {
485			DPRINTFN(5,
486			    ("rec: sample=%u precision=%u channels=%u\n",
487			    p->sample_rate, p->precision, p->channels));
488			if (p->sample_rate < 6023 || p->sample_rate > 48000 ||
489			    (p->precision != 8 && p->precision != 16) ||
490			    (p->channels != 1 && p->channels != 2)) {
491				return EINVAL;
492			}
493		}
494		hw = *p;
495		fil = mode == AUMODE_PLAY ? pfil : rfil;
496
497		switch (p->encoding) {
498		case AUDIO_ENCODING_SLINEAR_BE:
499			break;
500		case AUDIO_ENCODING_SLINEAR_LE:
501			break;
502		case AUDIO_ENCODING_ULINEAR_BE:
503			break;
504		case AUDIO_ENCODING_ULINEAR_LE:
505			break;
506		case AUDIO_ENCODING_ULAW:
507			hw.encoding = AUDIO_ENCODING_SLINEAR_LE;
508			fil->append(fil, mode == AUMODE_PLAY ? mulaw_to_linear8
509				    :  linear8_to_mulaw, &hw);
510			break;
511		case AUDIO_ENCODING_ALAW:
512			hw.encoding = AUDIO_ENCODING_SLINEAR_LE;
513			fil->append(fil, mode == AUMODE_PLAY ? alaw_to_linear8
514				    : linear8_to_alaw, &hw);
515			break;
516		default:
517			return EINVAL;
518		}
519	}
520
521	/* set sample rate */
522	cs4281_set_dac_rate(sc, play->sample_rate);
523	cs4281_set_adc_rate(sc, rec->sample_rate);
524	return 0;
525}
526
527static int
528cs4281_halt_output(void *addr)
529{
530	struct cs428x_softc *sc;
531
532	sc = addr;
533	BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK);
534	sc->sc_prun = 0;
535	return 0;
536}
537
538static int
539cs4281_halt_input(void *addr)
540{
541	struct cs428x_softc *sc;
542
543	sc = addr;
544	BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK);
545	sc->sc_rrun = 0;
546	return 0;
547}
548
549static int
550cs4281_getdev(void *addr, struct audio_device *retp)
551{
552
553	*retp = cs4281_device;
554	return 0;
555}
556
557static int
558cs4281_trigger_output(void *addr, void *start, void *end, int blksize,
559		      void (*intr)(void *), void *arg,
560		      const audio_params_t *param)
561{
562	struct cs428x_softc *sc;
563	uint32_t fmt;
564	struct cs428x_dma *p;
565	int dma_count;
566
567	sc = addr;
568	fmt = 0;
569#ifdef DIAGNOSTIC
570	if (sc->sc_prun)
571		printf("cs4281_trigger_output: already running\n");
572#endif
573	sc->sc_prun = 1;
574
575	DPRINTF(("cs4281_trigger_output: sc=%p start=%p end=%p "
576		 "blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg));
577	sc->sc_pintr = intr;
578	sc->sc_parg  = arg;
579
580	/* stop playback DMA */
581	BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK);
582
583	DPRINTF(("param: precision=%d channels=%d encoding=%d\n",
584	       param->precision, param->channels, param->encoding));
585	for (p = sc->sc_dmas; p != NULL && BUFADDR(p) != start; p = p->next)
586		continue;
587	if (p == NULL) {
588		printf("cs4281_trigger_output: bad addr %p\n", start);
589		return EINVAL;
590	}
591
592	sc->sc_pcount = blksize / sc->hw_blocksize;
593	sc->sc_ps = (char *)start;
594	sc->sc_pe = (char *)end;
595	sc->sc_pdma = p;
596	sc->sc_pbuf = KERNADDR(p);
597	sc->sc_pi = 0;
598	sc->sc_pn = sc->sc_ps;
599	if (blksize >= sc->dma_size) {
600		sc->sc_pn = sc->sc_ps + sc->dma_size;
601		memcpy(sc->sc_pbuf, start, sc->dma_size);
602		++sc->sc_pi;
603	} else {
604		sc->sc_pn = sc->sc_ps + sc->hw_blocksize;
605		memcpy(sc->sc_pbuf, start, sc->hw_blocksize);
606	}
607
608	dma_count = sc->dma_size;
609	if (param->precision != 8)
610		dma_count /= 2;   /* 16 bit */
611	if (param->channels > 1)
612		dma_count /= 2;   /* Stereo */
613
614	DPRINTF(("cs4281_trigger_output: DMAADDR(p)=0x%x count=%d\n",
615		 (int)DMAADDR(p), dma_count));
616	BA0WRITE4(sc, CS4281_DBA0, DMAADDR(p));
617	BA0WRITE4(sc, CS4281_DBC0, dma_count-1);
618
619	/* set playback format */
620	fmt = BA0READ4(sc, CS4281_DMR0) & ~DMRn_FMTMSK;
621	if (param->precision == 8)
622		fmt |= DMRn_SIZE8;
623	if (param->channels == 1)
624		fmt |= DMRn_MONO;
625	if (param->encoding == AUDIO_ENCODING_ULINEAR_BE ||
626	    param->encoding == AUDIO_ENCODING_SLINEAR_BE)
627		fmt |= DMRn_BEND;
628	if (param->encoding == AUDIO_ENCODING_ULINEAR_BE ||
629	    param->encoding == AUDIO_ENCODING_ULINEAR_LE)
630		fmt |= DMRn_USIGN;
631	BA0WRITE4(sc, CS4281_DMR0, fmt);
632
633	/* set sample rate */
634	sc->sc_prate = param->sample_rate;
635	cs4281_set_dac_rate(sc, param->sample_rate);
636
637	/* start DMA */
638	BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) & ~DCRn_MSK);
639	/* Enable interrupts */
640	BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM);
641
642	DPRINTF(("HICR =0x%08x(expected 0x00000001)\n", BA0READ4(sc, CS4281_HICR)));
643	DPRINTF(("HIMR =0x%08x(expected 0x00f0fc3f)\n", BA0READ4(sc, CS4281_HIMR)));
644	DPRINTF(("DMR0 =0x%08x(expected 0x2???0018)\n", BA0READ4(sc, CS4281_DMR0)));
645	DPRINTF(("DCR0 =0x%08x(expected 0x00030000)\n", BA0READ4(sc, CS4281_DCR0)));
646	DPRINTF(("FCR0 =0x%08x(expected 0x81000f00)\n", BA0READ4(sc, CS4281_FCR0)));
647	DPRINTF(("DACSR=0x%08x(expected 1 for 44kHz 5 for 8kHz)\n",
648		 BA0READ4(sc, CS4281_DACSR)));
649	DPRINTF(("SRCSA=0x%08x(expected 0x0b0a0100)\n", BA0READ4(sc, CS4281_SRCSA)));
650	DPRINTF(("SSPM&SSPM_PSRCEN =0x%08x(expected 0x00000010)\n",
651		 BA0READ4(sc, CS4281_SSPM) & SSPM_PSRCEN));
652
653	return 0;
654}
655
656static int
657cs4281_trigger_input(void *addr, void *start, void *end, int blksize,
658		     void (*intr)(void *), void *arg,
659		     const audio_params_t *param)
660{
661	struct cs428x_softc *sc;
662	struct cs428x_dma *p;
663	uint32_t fmt;
664	int dma_count;
665
666	sc = addr;
667	fmt = 0;
668#ifdef DIAGNOSTIC
669	if (sc->sc_rrun)
670		printf("cs4281_trigger_input: already running\n");
671#endif
672	sc->sc_rrun = 1;
673	DPRINTF(("cs4281_trigger_input: sc=%p start=%p end=%p "
674	    "blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg));
675	sc->sc_rintr = intr;
676	sc->sc_rarg  = arg;
677
678	/* stop recording DMA */
679	BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK);
680
681	for (p = sc->sc_dmas; p && BUFADDR(p) != start; p = p->next)
682		continue;
683	if (!p) {
684		printf("cs4281_trigger_input: bad addr %p\n", start);
685		return EINVAL;
686	}
687
688	sc->sc_rcount = blksize / sc->hw_blocksize;
689	sc->sc_rs = (char *)start;
690	sc->sc_re = (char *)end;
691	sc->sc_rdma = p;
692	sc->sc_rbuf = KERNADDR(p);
693	sc->sc_ri = 0;
694	sc->sc_rn = sc->sc_rs;
695
696	dma_count = sc->dma_size;
697	if (param->precision != 8)
698		dma_count /= 2;
699	if (param->channels > 1)
700		dma_count /= 2;
701
702	DPRINTF(("cs4281_trigger_input: DMAADDR(p)=0x%x count=%d\n",
703		 (int)DMAADDR(p), dma_count));
704	BA0WRITE4(sc, CS4281_DBA1, DMAADDR(p));
705	BA0WRITE4(sc, CS4281_DBC1, dma_count-1);
706
707	/* set recording format */
708	fmt = BA0READ4(sc, CS4281_DMR1) & ~DMRn_FMTMSK;
709	if (param->precision == 8)
710		fmt |= DMRn_SIZE8;
711	if (param->channels == 1)
712		fmt |= DMRn_MONO;
713	if (param->encoding == AUDIO_ENCODING_ULINEAR_BE ||
714	    param->encoding == AUDIO_ENCODING_SLINEAR_BE)
715		fmt |= DMRn_BEND;
716	if (param->encoding == AUDIO_ENCODING_ULINEAR_BE ||
717	    param->encoding == AUDIO_ENCODING_ULINEAR_LE)
718		fmt |= DMRn_USIGN;
719	BA0WRITE4(sc, CS4281_DMR1, fmt);
720
721	/* set sample rate */
722	sc->sc_rrate = param->sample_rate;
723	cs4281_set_adc_rate(sc, param->sample_rate);
724
725	/* Start DMA */
726	BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) & ~DCRn_MSK);
727	/* Enable interrupts */
728	BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM);
729
730	DPRINTF(("HICR=0x%08x\n", BA0READ4(sc, CS4281_HICR)));
731	DPRINTF(("HIMR=0x%08x\n", BA0READ4(sc, CS4281_HIMR)));
732	DPRINTF(("DMR1=0x%08x\n", BA0READ4(sc, CS4281_DMR1)));
733	DPRINTF(("DCR1=0x%08x\n", BA0READ4(sc, CS4281_DCR1)));
734
735	return 0;
736}
737
738static bool
739cs4281_suspend(device_t dv, const pmf_qual_t *qual)
740{
741	struct cs428x_softc *sc = device_private(dv);
742
743	mutex_enter(&sc->sc_lock);
744	mutex_spin_exit(&sc->sc_intr_lock);
745
746	/* save current playback status */
747	if (sc->sc_prun) {
748		sc->sc_suspend_state.cs4281.dcr0 = BA0READ4(sc, CS4281_DCR0);
749		sc->sc_suspend_state.cs4281.dmr0 = BA0READ4(sc, CS4281_DMR0);
750		sc->sc_suspend_state.cs4281.dbc0 = BA0READ4(sc, CS4281_DBC0);
751		sc->sc_suspend_state.cs4281.dba0 = BA0READ4(sc, CS4281_DBA0);
752	}
753
754	/* save current capture status */
755	if (sc->sc_rrun) {
756		sc->sc_suspend_state.cs4281.dcr1 = BA0READ4(sc, CS4281_DCR1);
757		sc->sc_suspend_state.cs4281.dmr1 = BA0READ4(sc, CS4281_DMR1);
758		sc->sc_suspend_state.cs4281.dbc1 = BA0READ4(sc, CS4281_DBC1);
759		sc->sc_suspend_state.cs4281.dba1 = BA0READ4(sc, CS4281_DBA1);
760	}
761	/* Stop DMA */
762	BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK);
763	BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK);
764
765	mutex_spin_exit(&sc->sc_intr_lock);
766	mutex_exit(&sc->sc_lock);
767
768	return true;
769}
770
771static bool
772cs4281_resume(device_t dv, const pmf_qual_t *qual)
773{
774	struct cs428x_softc *sc = device_private(dv);
775
776	mutex_enter(&sc->sc_lock);
777	mutex_spin_enter(&sc->sc_intr_lock);
778
779	cs4281_init(sc, 0);
780	cs4281_reset_codec(sc);
781
782	/* restore ac97 registers */
783	mutex_spin_exit(&sc->sc_intr_lock);
784	(*sc->codec_if->vtbl->restore_ports)(sc->codec_if);
785	mutex_spin_enter(&sc->sc_intr_lock);
786
787	/* restore DMA related status */
788	if (sc->sc_prun) {
789		cs4281_set_dac_rate(sc, sc->sc_prate);
790		BA0WRITE4(sc, CS4281_DBA0, sc->sc_suspend_state.cs4281.dba0);
791		BA0WRITE4(sc, CS4281_DBC0, sc->sc_suspend_state.cs4281.dbc0);
792		BA0WRITE4(sc, CS4281_DMR0, sc->sc_suspend_state.cs4281.dmr0);
793		BA0WRITE4(sc, CS4281_DCR0, sc->sc_suspend_state.cs4281.dcr0);
794	}
795	if (sc->sc_rrun) {
796		cs4281_set_adc_rate(sc, sc->sc_rrate);
797		BA0WRITE4(sc, CS4281_DBA1, sc->sc_suspend_state.cs4281.dba1);
798		BA0WRITE4(sc, CS4281_DBC1, sc->sc_suspend_state.cs4281.dbc1);
799		BA0WRITE4(sc, CS4281_DMR1, sc->sc_suspend_state.cs4281.dmr1);
800		BA0WRITE4(sc, CS4281_DCR1, sc->sc_suspend_state.cs4281.dcr1);
801	}
802	/* enable intterupts */
803	if (sc->sc_prun || sc->sc_rrun)
804		BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM);
805
806	mutex_spin_exit(&sc->sc_intr_lock);
807	mutex_exit(&sc->sc_lock);
808
809	return true;
810}
811
812/* control AC97 codec */
813static int
814cs4281_reset_codec(void *addr)
815{
816	struct cs428x_softc *sc;
817	uint16_t data;
818	uint32_t dat32;
819	int n;
820
821	sc = addr;
822
823	DPRINTFN(3, ("cs4281_reset_codec\n"));
824
825	/* Reset codec */
826	BA0WRITE4(sc, CS428X_ACCTL, 0);
827	delay(50);    /* delay 50us */
828
829	BA0WRITE4(sc, CS4281_SPMC, 0);
830	delay(100);	/* delay 100us */
831	BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN);
832#if defined(ENABLE_SECONDARY_CODEC)
833	BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN | SPCM_ASDIN2E);
834	BA0WRITE4(sc, CS4281_SERMC, SERMC_TCID);
835#endif
836	delay(50000);   /* XXX: delay 50ms */
837
838	/* Enable ASYNC generation */
839	BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN);
840
841	/* Wait for codec ready. Linux driver waits 50ms here */
842	n = 0;
843	while ((BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY) == 0) {
844		delay(100);
845		if (++n > 1000) {
846			printf("reset_codec: AC97 codec ready timeout\n");
847			return ETIMEDOUT;
848		}
849	}
850#if defined(ENABLE_SECONDARY_CODEC)
851	/* secondary codec ready*/
852	n = 0;
853	while ((BA0READ4(sc, CS4281_ACSTS2) & ACSTS2_CRDY2) == 0) {
854		delay(100);
855		if (++n > 1000)
856			return 0;
857	}
858#endif
859	/* Set the serial timing configuration */
860	/* XXX: undocumented but the Linux driver do this */
861	BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97);
862
863	/* Wait for codec ready signal */
864	n = 0;
865	do {
866		delay(1000);
867		if (++n > 1000) {
868			aprint_error_dev(sc->sc_dev,
869			    "timeout waiting for codec ready\n");
870			return ETIMEDOUT;
871		}
872		dat32 = BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY;
873	} while (dat32 == 0);
874
875	/* Enable Valid Frame output on ASDOUT */
876	BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN | ACCTL_VFRM);
877
878	/* Wait until codec calibration is finished. Codec register 26h */
879	n = 0;
880	do {
881		delay(1);
882		if (++n > 1000) {
883			aprint_error_dev(sc->sc_dev,
884			    "timeout waiting for codec calibration\n");
885			return ETIMEDOUT;
886		}
887		cs428x_read_codec(sc, AC97_REG_POWER, &data);
888	} while ((data & 0x0f) != 0x0f);
889
890	/* Set the serial timing configuration again */
891	/* XXX: undocumented but the Linux driver do this */
892	BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97);
893
894	/* Wait until we've sampled input slots 3 & 4 as valid */
895	n = 0;
896	do {
897		delay(1000);
898		if (++n > 1000) {
899			aprint_error_dev(sc->sc_dev, "timeout waiting for "
900			    "sampled input slots as valid\n");
901			return ETIMEDOUT;
902		}
903		dat32 = BA0READ4(sc, CS428X_ACISV) & (ACISV_ISV3 | ACISV_ISV4) ;
904	} while (dat32 != (ACISV_ISV3 | ACISV_ISV4));
905
906	/* Start digital data transfer of audio data to the codec */
907	BA0WRITE4(sc, CS428X_ACOSV, (ACOSV_SLV3 | ACOSV_SLV4));
908	return 0;
909}
910
911
912/* Internal functions */
913
914/* convert sample rate to register value */
915static uint8_t
916cs4281_sr2regval(int rate)
917{
918	uint8_t retval;
919
920	/* We don't have to change here. but anyway ... */
921	if (rate > 48000)
922		rate = 48000;
923	if (rate < 6023)
924		rate = 6023;
925
926	switch (rate) {
927	case 8000:
928		retval = 5;
929		break;
930	case 11025:
931		retval = 4;
932		break;
933	case 16000:
934		retval = 3;
935		break;
936	case 22050:
937		retval = 2;
938		break;
939	case 44100:
940		retval = 1;
941		break;
942	case 48000:
943		retval = 0;
944		break;
945	default:
946		retval = 1536000/rate; /* == 24576000/(rate*16) */
947	}
948	return retval;
949}
950
951static void
952cs4281_set_adc_rate(struct cs428x_softc *sc, int rate)
953{
954
955	BA0WRITE4(sc, CS4281_ADCSR, cs4281_sr2regval(rate));
956}
957
958static void
959cs4281_set_dac_rate(struct cs428x_softc *sc, int rate)
960{
961
962	BA0WRITE4(sc, CS4281_DACSR, cs4281_sr2regval(rate));
963}
964
965static int
966cs4281_init(struct cs428x_softc *sc, int init)
967{
968	int n;
969	uint16_t data;
970	uint32_t dat32;
971
972	/* set "Configuration Write Protect" register to
973	 * 0x4281 to allow to write */
974	BA0WRITE4(sc, CS4281_CWPR, 0x4281);
975
976	/*
977	 * Unset "Full Power-Down bit of Extended PCI Power Management
978	 * Control" register to release the reset state.
979	 */
980	dat32 = BA0READ4(sc, CS4281_EPPMC);
981	if (dat32 & EPPMC_FPDN) {
982		BA0WRITE4(sc, CS4281_EPPMC, dat32 & ~EPPMC_FPDN);
983	}
984
985	/* Start PLL out in known state */
986	BA0WRITE4(sc, CS4281_CLKCR1, 0);
987	/* Start serial ports out in known state */
988	BA0WRITE4(sc, CS4281_SERMC, 0);
989
990	/* Reset codec */
991	BA0WRITE4(sc, CS428X_ACCTL, 0);
992	delay(50);	/* delay 50us */
993
994	BA0WRITE4(sc, CS4281_SPMC, 0);
995	delay(100);	/* delay 100us */
996	BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN);
997#if defined(ENABLE_SECONDARY_CODEC)
998	BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN | SPCM_ASDIN2E);
999	BA0WRITE4(sc, CS4281_SERMC, SERMC_TCID);
1000#endif
1001	delay(50000);   /* XXX: delay 50ms */
1002
1003	/* Turn on Sound System clocks based on ABITCLK */
1004	BA0WRITE4(sc, CS4281_CLKCR1, CLKCR1_DLLP);
1005	delay(50000);   /* XXX: delay 50ms */
1006	BA0WRITE4(sc, CS4281_CLKCR1, CLKCR1_SWCE | CLKCR1_DLLP);
1007
1008	/* Set enables for sections that are needed in the SSPM registers */
1009	BA0WRITE4(sc, CS4281_SSPM,
1010		  SSPM_MIXEN |		/* Mixer */
1011		  SSPM_CSRCEN |		/* Capture SRC */
1012		  SSPM_PSRCEN |		/* Playback SRC */
1013		  SSPM_JSEN |		/* Joystick */
1014		  SSPM_ACLEN |		/* AC LINK */
1015		  SSPM_FMEN		/* FM */
1016		  );
1017
1018	/* Wait for clock stabilization */
1019	n = 0;
1020#if 1
1021	/* what document says */
1022	while ((BA0READ4(sc, CS4281_CLKCR1)& (CLKCR1_DLLRDY | CLKCR1_CLKON))
1023		 != (CLKCR1_DLLRDY | CLKCR1_CLKON)) {
1024		delay(100);
1025		if (++n > 1000) {
1026			aprint_error_dev(sc->sc_dev,
1027			    "timeout waiting for clock stabilization\n");
1028			return -1;
1029		}
1030	}
1031#else
1032	/* Cirrus driver for Linux does */
1033	while (!(BA0READ4(sc, CS4281_CLKCR1) & CLKCR1_DLLRDY)) {
1034		delay(1000);
1035		if (++n > 1000) {
1036			aprint_error_dev(sc->sc_dev,
1037			    "timeout waiting for clock stabilization\n");
1038			return -1;
1039		}
1040	}
1041#endif
1042
1043	/* Enable ASYNC generation */
1044	BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN);
1045
1046	/* Wait for codec ready. Linux driver waits 50ms here */
1047	n = 0;
1048	while ((BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY) == 0) {
1049		delay(100);
1050		if (++n > 1000) {
1051			aprint_error_dev(sc->sc_dev,
1052			    "timeout waiting for codec ready\n");
1053			return -1;
1054		}
1055	}
1056
1057#if defined(ENABLE_SECONDARY_CODEC)
1058	/* secondary codec ready*/
1059	n = 0;
1060	while ((BA0READ4(sc, CS4281_ACSTS2) & ACSTS2_CRDY2) == 0) {
1061		delay(100);
1062		if (++n > 1000) {
1063			aprint_error_dev(sc->sc_dev,
1064			    "timeout waiting for secondary codec ready\n");
1065			return -1;
1066		}
1067	}
1068#endif
1069
1070	/* Set the serial timing configuration */
1071	/* XXX: undocumented but the Linux driver do this */
1072	BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97);
1073
1074	/* Wait for codec ready signal */
1075	n = 0;
1076	do {
1077		delay(1000);
1078		if (++n > 1000) {
1079			aprint_error_dev(sc->sc_dev,
1080			    "timeout waiting for codec ready\n");
1081			return -1;
1082		}
1083		dat32 = BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY;
1084	} while (dat32 == 0);
1085
1086	/* Enable Valid Frame output on ASDOUT */
1087	BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN | ACCTL_VFRM);
1088
1089	/* Wait until codec calibration is finished. codec register 26h */
1090	n = 0;
1091	do {
1092		delay(1);
1093		if (++n > 1000) {
1094			aprint_error_dev(sc->sc_dev,
1095			    "timeout waiting for codec calibration\n");
1096			return -1;
1097		}
1098		cs428x_read_codec(sc, AC97_REG_POWER, &data);
1099	} while ((data & 0x0f) != 0x0f);
1100
1101	/* Set the serial timing configuration again */
1102	/* XXX: undocumented but the Linux driver do this */
1103	BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97);
1104
1105	/* Wait until we've sampled input slots 3 & 4 as valid */
1106	n = 0;
1107	do {
1108		delay(1000);
1109		if (++n > 1000) {
1110			aprint_error_dev(sc->sc_dev, "timeout waiting for "
1111			    "sampled input slots as valid\n");
1112			return -1;
1113		}
1114		dat32 = BA0READ4(sc, CS428X_ACISV) & (ACISV_ISV3 | ACISV_ISV4);
1115	} while (dat32 != (ACISV_ISV3 | ACISV_ISV4));
1116
1117	/* Start digital data transfer of audio data to the codec */
1118	BA0WRITE4(sc, CS428X_ACOSV, (ACOSV_SLV3 | ACOSV_SLV4));
1119
1120	cs428x_write_codec(sc, AC97_REG_HEADPHONE_VOLUME, 0);
1121	cs428x_write_codec(sc, AC97_REG_MASTER_VOLUME, 0);
1122
1123	/* Power on the DAC */
1124	cs428x_read_codec(sc, AC97_REG_POWER, &data);
1125	cs428x_write_codec(sc, AC97_REG_POWER, data & 0xfdff);
1126
1127	/* Wait until we sample a DAC ready state.
1128	 * Not documented, but Linux driver does.
1129	 */
1130	for (n = 0; n < 32; ++n) {
1131		delay(1000);
1132		cs428x_read_codec(sc, AC97_REG_POWER, &data);
1133		if (data & 0x02)
1134			break;
1135	}
1136
1137	/* Power on the ADC */
1138	cs428x_read_codec(sc, AC97_REG_POWER, &data);
1139	cs428x_write_codec(sc, AC97_REG_POWER, data & 0xfeff);
1140
1141	/* Wait until we sample ADC ready state.
1142	 * Not documented, but Linux driver does.
1143	 */
1144	for (n = 0; n < 32; ++n) {
1145		delay(1000);
1146		cs428x_read_codec(sc, AC97_REG_POWER, &data);
1147		if (data & 0x01)
1148			break;
1149	}
1150
1151#if 0
1152	/* Initialize AC-Link features */
1153	/* variable sample-rate support */
1154	mem = BA0READ4(sc, CS4281_SERMC);
1155	mem |=  (SERMC_ODSEN1 | SERMC_ODSEN2);
1156	BA0WRITE4(sc, CS4281_SERMC, mem);
1157	/* XXX: more... */
1158
1159	/* Initialize SSCR register features */
1160	/* XXX: hardware volume setting */
1161	BA0WRITE4(sc, CS4281_SSCR, ~SSCR_HVC); /* disable HW volume setting */
1162#endif
1163
1164	/* disable Sound Blaster Pro emulation */
1165	/* XXX:
1166	 * Cannot set since the documents does not describe which bit is
1167	 * correspond to SSCR_SB. Since the reset value of SSCR is 0,
1168	 * we can ignore it.*/
1169#if 0
1170	BA0WRITE4(sc, CS4281_SSCR, SSCR_SB);
1171#endif
1172
1173	/* map AC97 PCM playback to DMA Channel 0 */
1174	/* Reset FEN bit to setup first */
1175	BA0WRITE4(sc, CS4281_FCR0, (BA0READ4(sc, CS4281_FCR0) & ~FCRn_FEN));
1176	/*
1177	 *| RS[4:0]/|        |
1178	 *| LS[4:0] |  AC97  | Slot Function
1179	 *|---------+--------+--------------------
1180	 *|     0   |    3   | Left PCM Playback
1181	 *|     1   |    4   | Right PCM Playback
1182	 *|     2   |    5   | Phone Line 1 DAC
1183	 *|     3   |    6   | Center PCM Playback
1184	 *....
1185	 *  quoted from Table 29(p109)
1186	 */
1187	dat32 = 0x01 << 24 |   /* RS[4:0] =  1 see above */
1188		0x00 << 16 |   /* LS[4:0] =  0 see above */
1189		0x0f <<  8 |   /* SZ[6:0] = 15 size of buffer */
1190		0x00 <<  0 ;   /* OF[6:0] =  0 offset */
1191	BA0WRITE4(sc, CS4281_FCR0, dat32);
1192	BA0WRITE4(sc, CS4281_FCR0, dat32 | FCRn_FEN);
1193
1194	/* map AC97 PCM record to DMA Channel 1 */
1195	/* Reset FEN bit to setup first */
1196	BA0WRITE4(sc, CS4281_FCR1, (BA0READ4(sc, CS4281_FCR1) & ~FCRn_FEN));
1197	/*
1198	 *| RS[4:0]/|
1199	 *| LS[4:0] | AC97 | Slot Function
1200	 *|---------+------+-------------------
1201	 *|   10    |   3  | Left PCM Record
1202	 *|   11    |   4  | Right PCM Record
1203	 *|   12    |   5  | Phone Line 1 ADC
1204	 *|   13    |   6  | Mic ADC
1205	 *....
1206	 * quoted from Table 30(p109)
1207	 */
1208	dat32 = 0x0b << 24 |    /* RS[4:0] = 11 See above */
1209		0x0a << 16 |    /* LS[4:0] = 10 See above */
1210		0x0f <<  8 |    /* SZ[6:0] = 15 Size of buffer */
1211		0x10 <<  0 ;    /* OF[6:0] = 16 offset */
1212
1213	/* XXX: I cannot understand why FCRn_PSH is needed here. */
1214	BA0WRITE4(sc, CS4281_FCR1, dat32 | FCRn_PSH);
1215	BA0WRITE4(sc, CS4281_FCR1, dat32 | FCRn_FEN);
1216
1217#if 0
1218	/* Disable DMA Channel 2, 3 */
1219	BA0WRITE4(sc, CS4281_FCR2, (BA0READ4(sc, CS4281_FCR2) & ~FCRn_FEN));
1220	BA0WRITE4(sc, CS4281_FCR3, (BA0READ4(sc, CS4281_FCR3) & ~FCRn_FEN));
1221#endif
1222
1223	/* Set the SRC Slot Assignment accordingly */
1224	/*| PLSS[4:0]/
1225	 *| PRSS[4:0] | AC97 | Slot Function
1226	 *|-----------+------+----------------
1227	 *|     0     |  3   | Left PCM Playback
1228	 *|     1     |  4   | Right PCM Playback
1229	 *|     2     |  5   | phone line 1 DAC
1230	 *|     3     |  6   | Center PCM Playback
1231	 *|     4     |  7   | Left Surround PCM Playback
1232	 *|     5     |  8   | Right Surround PCM Playback
1233	 *......
1234	 *
1235	 *| CLSS[4:0]/
1236	 *| CRSS[4:0] | AC97 | Codec |Slot Function
1237	 *|-----------+------+-------+-----------------
1238	 *|    10     |   3  |Primary| Left PCM Record
1239	 *|    11     |   4  |Primary| Right PCM Record
1240	 *|    12     |   5  |Primary| Phone Line 1 ADC
1241	 *|    13     |   6  |Primary| Mic ADC
1242	 *|.....
1243	 *|    20     |   3  |  Sec. | Left PCM Record
1244	 *|    21     |   4  |  Sec. | Right PCM Record
1245	 *|    22     |   5  |  Sec. | Phone Line 1 ADC
1246	 *|    23     |   6  |  Sec. | Mic ADC
1247	 */
1248	dat32 = 0x0b << 24 |   /* CRSS[4:0] Right PCM Record(primary) */
1249		0x0a << 16 |   /* CLSS[4:0] Left  PCM Record(primary) */
1250		0x01 <<  8 |   /* PRSS[4:0] Right PCM Playback */
1251		0x00 <<  0;    /* PLSS[4:0] Left  PCM Playback */
1252	BA0WRITE4(sc, CS4281_SRCSA, dat32);
1253
1254	/* Set interrupt to occurred at Half and Full terminal
1255	 * count interrupt enable for DMA channel 0 and 1.
1256	 * To keep DMA stop, set MSK.
1257	 */
1258	dat32 = DCRn_HTCIE | DCRn_TCIE | DCRn_MSK;
1259	BA0WRITE4(sc, CS4281_DCR0, dat32);
1260	BA0WRITE4(sc, CS4281_DCR1, dat32);
1261
1262	/* Set Auto-Initialize Contorl enable */
1263	BA0WRITE4(sc, CS4281_DMR0,
1264		  DMRn_DMA | DMRn_AUTO | DMRn_TR_READ);
1265	BA0WRITE4(sc, CS4281_DMR1,
1266		  DMRn_DMA | DMRn_AUTO | DMRn_TR_WRITE);
1267
1268	/* Clear DMA Mask in HIMR */
1269	dat32 = ~HIMR_DMAIM & ~HIMR_D1IM & ~HIMR_D0IM;
1270	BA0WRITE4(sc, CS4281_HIMR,
1271		  BA0READ4(sc, CS4281_HIMR) & dat32);
1272
1273	/* set current status */
1274	if (init != 0) {
1275		sc->sc_prun = 0;
1276		sc->sc_rrun = 0;
1277	}
1278
1279	/* setup playback volume */
1280	BA0WRITE4(sc, CS4281_PPRVC, 7);
1281	BA0WRITE4(sc, CS4281_PPLVC, 7);
1282
1283	return 0;
1284}
1285