files.isa revision 1.9
1# $NetBSD: files.isa,v 1.9 1995/11/10 19:39:21 christos Exp $ 2# 3# Config.new file and device description for machine-independent ISA code. 4# Included by ports that need it. Requires that the SCSI files be 5# defined first. 6 7# ports should define their own "device isa" line (like the one below, 8# but with the correct bus attachment). IT MUST USE CONFIGURATION 9# LOCATORS IDENTICAL TO THOSE SPECIFIED BELOW. 10 11# ports should specify appropriate major numbers for the following 12# devices: 13# mcd, scd, wd, wt 14 15#device isa at root {[port = -1], [size = 0], 16# [iomem = -1], [iosiz = 0], 17# [irq = -1], [drq = -1]} 18file dev/isa/isa.c isa needs-flag 19 20# ISA DMA controller 21define isadma 22file dev/isa/isadma.c isadma needs-flag 23 24# 25# 8250/16[45]50-based multi-port serial boards 26# 27 28define commulti {[slave = -1]} 29 30# AST 4-port board 31device ast at isa: commulti 32file dev/isa/ast.c ast 33 34# BOCA 8-port board 35device boca at isa: commulti 36file dev/isa/boca.c boca 37 38# IBM RT PC 4-port board 39device rtfps at isa: commulti 40file dev/isa/rtfps.c rtfps 41 42# 43# Serial and parallel drivers 44# 45 46# 8250/16[45]50-based "com" ports 47device com at isa, commulti: tty 48file dev/isa/com.c com needs-flag 49 50# Cyclades Cyclom multiport serial cards 51# XXX currently broken 52device cy at isa: tty 53file dev/isa/cy.c cy needs-count 54 55# PC parallel ports (XXX what chip?) 56device lpt at isa 57file dev/isa/lpt.c lpt needs-flag 58 59# 60# SCSI host adapters 61# 62 63# Adaptec AHA-154x family 64device aha at isa: scsi, isadma 65file dev/isa/aha1542.c aha 66 67# Adapctec AIC-6[32]60 ICs 68device aic at isa: scsi, isadma 69file dev/isa/aic6360.c aic 70 71# BusLogic BT-74x EISA family (XXX; should be EISA. it's special) 72device bt at isa: scsi, isadma 73file dev/isa/bt742a.c bt 74 75# Seagate ST0[12] ICs 76device sea at isa: scsi, isadma 77file dev/isa/seagate.c sea 78 79# UltraStor UHA-[13]4f boards 80device uha at isa: scsi, isadma 81file dev/isa/ultra14f.c uha 82 83# Western Digital WD7000 boards (XXX incomplete description) 84# XXX not yet working 85device wds at isa: scsi, isadma 86file dev/isa/wd7000.c wds 87 88# 89# Other ISA disk controllers 90# 91 92# Mitsumi CD-ROM controllers 93device mcd at isa: disk 94file dev/isa/mcd.c mcd needs-flag 95 96# Sony CDU-3[13]A CD-ROM drives 97device scd at isa: disk 98file dev/isa/scd.c scd needs-flag 99 100# ISA "wd" (ESDI/IDE/etc.) controllers 101device wdc at isa {drive = -1} 102device wd at wdc: disk, isadma 103file dev/isa/wd.c wdc needs-flag 104 105# Wangtek- and Archive-compatible tape controller boards 106device wt at isa: tape, isadma 107file dev/isa/wt.c wt needs-flag 108 109# 110# ISA networking drivers 111# 112 113# 3Com common probe code 114define elink 115file dev/isa/elink.c elink 116 117# National Semiconductor DS8390/WD83C690-based boards 118# (WD/SMC 80x3 family, SMC Ultra [8216], 3Com 3C503, NE[12]000, and clones) 119device ed at isa: ether, ifnet 120file dev/isa/if_ed.c ed 121 122# 3Com 3C505 123device eg at isa: ether, ifnet 124file dev/isa/if_eg.c eg 125 126# 3Com 3C501 127device el at isa: ether, ifnet 128file dev/isa/if_el.c el 129 130# 3Com 3C5x9, 3c59x (EtherLink III) family 131device ep at isa, pci: ether, ifnet, elink 132file dev/isa/if_ep.c ep 133 134# Fujitsu MB8696[05]-based boards 135# (Allied Telesis AT1700) 136device fe at isa: ether, ifnet 137file dev/isa/if_fe.c fe 138 139# HP Lan Ethernet controllers 140# XXX currently broken 141#device hp at isa: ether, ifnet 142#file dev/isa/if_hp.c hp 143 144# Intel i82586-based boards 145# (AT&T StarLAN 10, AT&T EN100, AT&T StarLAN Fiber, 3Com 3C507) 146device ie at isa: ether, ifnet, elink 147file dev/isa/if_ie.c ie 148 149# XXX ??? 150# XXX NOT IN TREE? 151#device ix at isa: ether, ifnet 152#file dev/isa/if_ix.c ix 153 154# AMD am7990 (Lance) -based boards 155# (BICC Isolan, NE2100, DEPCA) 156# XXX conflicts with alpha if_le.c 157#device le at isa: ether, ifnet, isadma 158#file dev/isa/if_le.c le 159 160# 161# ISA Sound hardware 162# 163 164# the SoundBlaster DSP, or close likenesses; used by other drivers 165define sbdsp 166file dev/isa/sbdsp.c sbdsp 167 168# SoundBlaster family 169device sb at isa: audio, isadma, sbdsp, mulaw 170file dev/isa/sb.c sb needs-flag 171 172# ProAudio Spectrum 173device pas at isa: audio, isadma, sbdsp, mulaw 174file dev/isa/pas.c pas needs-flag 175 176# AD1848 (CS4248, CS4231, AD1845) audio codec support; used by other drivers 177define ad1848 178file dev/isa/ad1848.c ad1848 179 180# ICS2101 mixer chip support; used by other drivers 181define ics2101 182file dev/isa/ics2101.c ics2101 183 184 185# Audio systems based on Echo Speech Corp. ESC61[45] ASICs 186device pss at isa {[port = -1], [size = 0], 187 [iomem = -1], [iosiz = 0], 188 [irq = -1], [drq = -1]} 189device sp at pss: audio, isadma, ad1848 190file dev/isa/pss.c pss needs-flag 191 192# Microsoft Windows Sound System 193device wss at isa: audio, isadma, ad1848 194file dev/isa/wss.c wss needs-flag 195 196# Gravis UltraSound & UltraSound MAX. 197# Use the "flags" keyword in a config file to specify an extra DMA 198# channel for full-duplex operation. 199device gus at isa: audio, isadma, ics2101, ad1848, mulaw 200file dev/isa/gus.c gus needs-flag 201