files.isa revision 1.23
1# $NetBSD: files.isa,v 1.23 1996/09/07 12:12:20 mycroft Exp $ 2# 3# Config.new file and device description for machine-independent ISA code. 4# Included by ports that need it. Requires that the SCSI files be 5# defined first. 6 7# ports should specify appropriate major numbers for the following 8# devices: 9# mcd, scd, wd, wt 10 11device isa {[port = -1], [size = 0], 12 [iomem = -1], [iosiz = 0], 13 [irq = -1], [drq = -1]} 14attach isa at isabus 15file dev/isa/isa.c isa needs-flag 16 17# ISA DMA controller 18define isadma 19file dev/isa/isadma.c isadma needs-flag 20 21# 22# 8250/16[45]50-based multi-port serial boards 23# 24 25define commulti {[slave = -1]} 26 27# AST 4-port board 28device ast: commulti 29attach ast at isa 30file dev/isa/ast.c ast 31 32# BOCA 8-port board 33device boca: commulti 34attach boca at isa 35file dev/isa/boca.c boca 36 37# IBM RT PC 4-port board 38device rtfps: commulti 39attach rtfps at isa 40file dev/isa/rtfps.c rtfps 41 42# 43# Serial and parallel drivers 44# 45 46# 8250/16[45]50-based "com" ports 47device com: tty 48attach com at isa with com_isa 49attach com at commulti with com_commulti 50file dev/isa/com.c com & (com_isa | com_commulti) needs-flag 51 52# Cyclades Cyclom multiport serial cards 53# XXX currently broken 54device cy: tty 55attach cy at isa 56file dev/isa/cy.c cy needs-count 57 58# PC parallel ports (XXX what chip?) 59device lpt 60attach lpt at isa 61file dev/isa/lpt.c lpt needs-flag 62 63# 64# SCSI host adapters 65# 66 67# Adaptec AHA-154x family 68device aha: scsi 69attach aha at isa with aha_isa: isadma 70file dev/isa/aha.c aha 71 72# Adaptec AIC-6[32]60 ICs 73device aic: scsi, isadma 74attach aic at isa 75file dev/isa/aic6360.c aic 76 77# BusLogic BT-[45]4x ISA family 78# device declaration in sys/conf/files 79attach bha at isa with bha_isa: isadma 80file dev/isa/bha_isa.c bha_isa 81 82# Seagate ST0[12] ICs 83device sea: scsi, isadma 84attach sea at isa 85file dev/isa/seagate.c sea 86 87# UltraStor UHA-[13]4f boards 88# device declaration in sys/conf/files 89attach uha at isa with uha_isa: isadma 90file dev/isa/uha_isa.c uha_isa 91 92# Western Digital WD7000 and Future Domain TMC-7000 boards 93device wds: scsi, isadma 94attach wds at isa 95file dev/isa/wds.c wds 96 97# 98# Other ISA disk controllers 99# 100 101# Mitsumi CD-ROM controllers 102device mcd: disk 103attach mcd at isa 104file dev/isa/mcd.c mcd needs-flag 105 106# Sony CDU-3[13]A CD-ROM drives 107device scd: disk 108attach scd at isa 109file dev/isa/scd.c scd needs-flag 110 111# ISA "wd" (ESDI/IDE/etc.) controllers 112device wdc {drive = -1} 113attach wdc at isa 114device wd: disk, isadma 115attach wd at wdc 116file dev/isa/wd.c wdc needs-flag 117 118# Wangtek- and Archive-compatible tape controller boards 119device wt: tape, isadma 120attach wt at isa 121file dev/isa/wt.c wt needs-flag 122 123# 124# ISA networking drivers 125# 126 127# 3Com common probe code 128define elink 129file dev/isa/elink.c elink 130 131# National Semiconductor DS8390/WD83C690-based boards 132# (WD/SMC 80x3 family, SMC Ultra [8216], 3Com 3C503, NE[12]000, and clones) 133device ed: ether, ifnet 134attach ed at isa 135file dev/isa/if_ed.c ed 136 137# 3Com 3C505 138device eg: ether, ifnet 139attach eg at isa 140file dev/isa/if_eg.c eg 141 142# 3Com 3C501 143device el: ether, ifnet 144attach el at isa 145file dev/isa/if_el.c el 146 147# 3Com 3C509 Ethernet controller 148attach ep at isa with ep_isa: elink 149file dev/isa/if_ep_isa.c ep_isa 150 151# Fujitsu MB8696[05]-based boards 152# (Allied Telesis AT1700) 153device fe: ether, ifnet 154attach fe at isa 155file dev/isa/if_fe.c fe 156 157# HP Lan Ethernet controllers 158# XXX currently broken 159#device hp: ether, ifnet 160#attach hp at isa 161#file dev/isa/if_hp.c hp 162 163# Intel i82586-based boards 164# (AT&T StarLAN 10, AT&T EN100, AT&T StarLAN Fiber, 3Com 3C507) 165device ie: ether, ifnet, elink 166attach ie at isa 167file dev/isa/if_ie.c ie 168 169# Intel i82595-based boards. 170# (Intel EtherExpress PRO) 171device iy: ether, ifnet 172attach iy at isa 173file dev/isa/if_iy.c iy 174 175# XXX ??? 176# XXX NOT IN TREE? 177#device ix: ether, ifnet 178#attach ix at isa 179#file dev/isa/if_ix.c ix 180 181# AMD am7990 (Lance) -based boards 182# (BICC Isolan, NE2100, DEPCA) 183# device declaration in sys/conf/files 184attach le at isa with le_isa: isadma 185file dev/isa/if_le_isa.c le_isa 186 187# 188# ISA Sound hardware 189# 190 191# the SoundBlaster DSP, or close likenesses; used by other drivers 192define sbdsp 193file dev/isa/sbdsp.c sbdsp 194 195# SoundBlaster family 196device sb: audio, isadma, sbdsp, mulaw 197attach sb at isa 198file dev/isa/sb.c sb needs-flag 199 200# ProAudio Spectrum 201device pas: audio, isadma, sbdsp, mulaw 202attach pas at isa 203file dev/isa/pas.c pas needs-flag 204 205# AD1848 (CS4248, CS4231, AD1845) audio codec support; used by other drivers 206define ad1848 207file dev/isa/ad1848.c ad1848 208 209# ICS2101 mixer chip support; used by other drivers 210define ics2101 211file dev/isa/ics2101.c ics2101 212 213 214# Audio systems based on Echo Speech Corp. ESC61[45] ASICs 215device pss {[port = -1], [size = 0], 216 [iomem = -1], [iosiz = 0], 217 [irq = -1], [drq = -1]} 218attach pss at isa 219device sp: audio, isadma, ad1848 220attach sp at pss 221file dev/isa/pss.c pss needs-flag 222 223# Microsoft Windows Sound System 224device wss: audio, isadma, ad1848 225attach wss at isa 226file dev/isa/wss.c wss needs-flag 227 228# Gravis UltraSound & UltraSound MAX. 229# Use the "flags" keyword in a config file to specify an extra DMA 230# channel for full-duplex operation. 231device gus: audio, isadma, ics2101, ad1848, mulaw 232attach gus at isa 233file dev/isa/gus.c gus needs-flag 234