files.isa revision 1.17
1# $NetBSD: files.isa,v 1.17 1996/03/29 20:53:30 mycroft Exp $ 2# 3# Config.new file and device description for machine-independent ISA code. 4# Included by ports that need it. Requires that the SCSI files be 5# defined first. 6 7# ports should specify appropriate major numbers for the following 8# devices: 9# mcd, scd, wd, wt 10 11device isa {[port = -1], [size = 0], 12 [iomem = -1], [iosiz = 0], 13 [irq = -1], [drq = -1]} 14attach isa at isabus 15file dev/isa/isa.c isa needs-flag 16 17# ISA DMA controller 18define isadma 19file dev/isa/isadma.c isadma needs-flag 20 21# 22# 8250/16[45]50-based multi-port serial boards 23# 24 25define commulti {[slave = -1]} 26 27# AST 4-port board 28device ast: commulti 29attach ast at isa 30file dev/isa/ast.c ast 31 32# BOCA 8-port board 33device boca: commulti 34attach boca at isa 35file dev/isa/boca.c boca 36 37# IBM RT PC 4-port board 38device rtfps: commulti 39attach rtfps at isa 40file dev/isa/rtfps.c rtfps 41 42# 43# Serial and parallel drivers 44# 45 46# 8250/16[45]50-based "com" ports 47device com: tty 48attach com at isa with com_isa 49attach com at commulti with com_commulti 50file dev/isa/com.c com & (com_isa | com_commulti) needs-flag 51 52# Cyclades Cyclom multiport serial cards 53# XXX currently broken 54device cy: tty 55attach cy at isa 56file dev/isa/cy.c cy needs-count 57 58# PC parallel ports (XXX what chip?) 59device lpt 60attach lpt at isa 61file dev/isa/lpt.c lpt needs-flag 62 63# 64# SCSI host adapters 65# 66 67# Adaptec AHA-154x family 68device aha: scsi, isadma 69attach aha at isa 70file dev/isa/aha.c aha 71 72# Adapctec AIC-6[32]60 ICs 73device aic: scsi, isadma 74attach aic at isa 75file dev/isa/aic6360.c aic 76 77# Adaptec 7770-based EISA, VLB, etc. controllers 78device ahe: scsi, aic7xxx 79attach ahe at isa 80file dev/isa/aha284x.c ahe 81 82# BusLogic BT-74x EISA family (XXX; should be EISA. it's special) 83device bt: scsi, isadma 84attach bt at isa 85file dev/isa/bt.c bt 86 87# Seagate ST0[12] ICs 88device sea: scsi, isadma 89attach sea at isa 90file dev/isa/seagate.c sea 91 92# UltraStor UHA-[13]4f boards 93device uha: scsi, isadma 94attach uha at isa 95file dev/isa/ultra14f.c uha 96 97# Western Digital WD7000 and Future Domain TMC-7000 boards 98device wds: scsi, isadma 99attach wds at isa 100file dev/isa/wds.c wds 101 102# 103# Other ISA disk controllers 104# 105 106# Mitsumi CD-ROM controllers 107device mcd: disk 108attach mcd at isa 109file dev/isa/mcd.c mcd needs-flag 110 111# Sony CDU-3[13]A CD-ROM drives 112device scd: disk 113attach scd at isa 114file dev/isa/scd.c scd needs-flag 115 116# ISA "wd" (ESDI/IDE/etc.) controllers 117device wdc {drive = -1} 118attach wdc at isa 119device wd: disk, isadma 120attach wd at wdc 121file dev/isa/wd.c wdc needs-flag 122 123# Wangtek- and Archive-compatible tape controller boards 124device wt: tape, isadma 125attach wt at isa 126file dev/isa/wt.c wt needs-flag 127 128# 129# ISA networking drivers 130# 131 132# 3Com common probe code 133define elink 134file dev/isa/elink.c elink 135 136# National Semiconductor DS8390/WD83C690-based boards 137# (WD/SMC 80x3 family, SMC Ultra [8216], 3Com 3C503, NE[12]000, and clones) 138device ed: ether, ifnet 139attach ed at isa 140file dev/isa/if_ed.c ed 141 142# 3Com 3C505 143device eg: ether, ifnet 144attach eg at isa 145file dev/isa/if_eg.c eg 146 147# 3Com 3C501 148device el: ether, ifnet 149attach el at isa 150file dev/isa/if_el.c el 151 152# 3Com 3C5x9, 3c59x (EtherLink III) family 153device ep: ether, ifnet, elink 154attach ep at isa with ep_isa 155attach ep at pci with ep_pci 156file dev/isa/if_ep.c ep 157 158# Fujitsu MB8696[05]-based boards 159# (Allied Telesis AT1700) 160device fe: ether, ifnet 161attach fe at isa 162file dev/isa/if_fe.c fe 163 164# HP Lan Ethernet controllers 165# XXX currently broken 166#device hp: ether, ifnet 167#attach hp at isa 168#file dev/isa/if_hp.c hp 169 170# Intel i82586-based boards 171# (AT&T StarLAN 10, AT&T EN100, AT&T StarLAN Fiber, 3Com 3C507) 172device ie: ether, ifnet, elink 173attach ie at isa 174file dev/isa/if_ie.c ie 175 176# XXX ??? 177# XXX NOT IN TREE? 178#device ix: ether, ifnet 179#attach ix at isa 180#file dev/isa/if_ix.c ix 181 182# AMD am7990 (Lance) -based boards 183# (BICC Isolan, NE2100, DEPCA) 184# XXX conflicts with alpha if_le.c 185#device le: ether, ifnet, isadma 186#attach le at isa with le_isa 187#file dev/isa/if_le.c le 188 189# 190# ISA Sound hardware 191# 192 193# the SoundBlaster DSP, or close likenesses; used by other drivers 194define sbdsp 195file dev/isa/sbdsp.c sbdsp 196 197# SoundBlaster family 198device sb: audio, isadma, sbdsp, mulaw 199attach sb at isa 200file dev/isa/sb.c sb needs-flag 201 202# ProAudio Spectrum 203device pas: audio, isadma, sbdsp, mulaw 204attach pas at isa 205file dev/isa/pas.c pas needs-flag 206 207# AD1848 (CS4248, CS4231, AD1845) audio codec support; used by other drivers 208define ad1848 209file dev/isa/ad1848.c ad1848 210 211# ICS2101 mixer chip support; used by other drivers 212define ics2101 213file dev/isa/ics2101.c ics2101 214 215 216# Audio systems based on Echo Speech Corp. ESC61[45] ASICs 217device pss {[port = -1], [size = 0], 218 [iomem = -1], [iosiz = 0], 219 [irq = -1], [drq = -1]} 220attach pss at isa 221device sp: audio, isadma, ad1848 222attach sp at pss 223file dev/isa/pss.c pss needs-flag 224 225# Microsoft Windows Sound System 226device wss: audio, isadma, ad1848 227attach wss at isa 228file dev/isa/wss.c wss needs-flag 229 230# Gravis UltraSound & UltraSound MAX. 231# Use the "flags" keyword in a config file to specify an extra DMA 232# channel for full-duplex operation. 233device gus: audio, isadma, ics2101, ad1848, mulaw 234attach gus at isa 235file dev/isa/gus.c gus needs-flag 236