files.isa revision 1.16
1# $NetBSD: files.isa,v 1.16 1996/03/24 22:20:54 mycroft Exp $ 2# 3# Config.new file and device description for machine-independent ISA code. 4# Included by ports that need it. Requires that the SCSI files be 5# defined first. 6 7# ports should specify appropriate major numbers for the following 8# devices: 9# mcd, scd, wd, wt 10 11device isa {[port = -1], [size = 0], 12 [iomem = -1], [iosiz = 0], 13 [irq = -1], [drq = -1]} 14attach isa at isabus 15file dev/isa/isa.c isa needs-flag 16 17# ISA DMA controller 18define isadma 19file dev/isa/isadma.c isadma needs-flag 20 21# 22# 8250/16[45]50-based multi-port serial boards 23# 24 25define commulti {[slave = -1]} 26 27# AST 4-port board 28device ast: commulti 29attach ast at isa 30file dev/isa/ast.c ast 31 32# BOCA 8-port board 33device boca: commulti 34attach boca at isa 35file dev/isa/boca.c boca 36 37# IBM RT PC 4-port board 38device rtfps: commulti 39attach rtfps at isa 40file dev/isa/rtfps.c rtfps 41 42# 43# Serial and parallel drivers 44# 45 46# 8250/16[45]50-based "com" ports 47device com: tty 48attach com at isa with com_isa 49attach com at commulti with com_commulti 50file dev/isa/com.c com & (com_isa | com_commulti) needs-flag 51 52# Cyclades Cyclom multiport serial cards 53# XXX currently broken 54device cy: tty 55attach cy at isa 56file dev/isa/cy.c cy needs-count 57 58# PC parallel ports (XXX what chip?) 59device lpt 60attach lpt at isa 61file dev/isa/lpt.c lpt needs-flag 62 63# 64# SCSI host adapters 65# 66 67# Adaptec AHA-154x family 68device aha: scsi, isadma 69attach aha at isa 70file dev/isa/aha.c aha 71 72# Adapctec AIC-6[32]60 ICs 73device aic: scsi, isadma 74attach aic at isa 75file dev/isa/aic6360.c aic 76 77# Adaptec 7770-based EISA, VLB, etc. controllers 78device ahe: scsi, aic7xxx 79attach ahe at isa 80file dev/isa/aha284x.c ahe 81 82# BusLogic BT-74x EISA family (XXX; should be EISA. it's special) 83device bt: scsi, isadma 84attach bt at isa 85file dev/isa/bt.c bt 86 87# Seagate ST0[12] ICs 88device sea: scsi, isadma 89attach sea at isa 90file dev/isa/seagate.c sea 91 92# UltraStor UHA-[13]4f boards 93device uha: scsi, isadma 94attach uha at isa 95file dev/isa/ultra14f.c uha 96 97# Western Digital WD7000 boards (XXX incomplete description) 98# XXX not yet working 99device wds: scsi, isadma 100attach wds at isa 101file dev/isa/wd7000.c wds 102 103# 104# Other ISA disk controllers 105# 106 107# Mitsumi CD-ROM controllers 108device mcd: disk 109attach mcd at isa 110file dev/isa/mcd.c mcd needs-flag 111 112# Sony CDU-3[13]A CD-ROM drives 113device scd: disk 114attach scd at isa 115file dev/isa/scd.c scd needs-flag 116 117# ISA "wd" (ESDI/IDE/etc.) controllers 118device wdc {drive = -1} 119attach wdc at isa 120device wd: disk, isadma 121attach wd at wdc 122file dev/isa/wd.c wdc needs-flag 123 124# Wangtek- and Archive-compatible tape controller boards 125device wt: tape, isadma 126attach wt at isa 127file dev/isa/wt.c wt needs-flag 128 129# 130# ISA networking drivers 131# 132 133# 3Com common probe code 134define elink 135file dev/isa/elink.c elink 136 137# National Semiconductor DS8390/WD83C690-based boards 138# (WD/SMC 80x3 family, SMC Ultra [8216], 3Com 3C503, NE[12]000, and clones) 139device ed: ether, ifnet 140attach ed at isa 141file dev/isa/if_ed.c ed 142 143# 3Com 3C505 144device eg: ether, ifnet 145attach eg at isa 146file dev/isa/if_eg.c eg 147 148# 3Com 3C501 149device el: ether, ifnet 150attach el at isa 151file dev/isa/if_el.c el 152 153# 3Com 3C5x9, 3c59x (EtherLink III) family 154device ep: ether, ifnet, elink 155attach ep at isa with ep_isa 156attach ep at pci with ep_pci 157file dev/isa/if_ep.c ep 158 159# Fujitsu MB8696[05]-based boards 160# (Allied Telesis AT1700) 161device fe: ether, ifnet 162attach fe at isa 163file dev/isa/if_fe.c fe 164 165# HP Lan Ethernet controllers 166# XXX currently broken 167#device hp: ether, ifnet 168#attach hp at isa 169#file dev/isa/if_hp.c hp 170 171# Intel i82586-based boards 172# (AT&T StarLAN 10, AT&T EN100, AT&T StarLAN Fiber, 3Com 3C507) 173device ie: ether, ifnet, elink 174attach ie at isa 175file dev/isa/if_ie.c ie 176 177# XXX ??? 178# XXX NOT IN TREE? 179#device ix: ether, ifnet 180#attach ix at isa 181#file dev/isa/if_ix.c ix 182 183# AMD am7990 (Lance) -based boards 184# (BICC Isolan, NE2100, DEPCA) 185# XXX conflicts with alpha if_le.c 186#device le: ether, ifnet, isadma 187#attach le at isa with le_isa 188#file dev/isa/if_le.c le 189 190# 191# ISA Sound hardware 192# 193 194# the SoundBlaster DSP, or close likenesses; used by other drivers 195define sbdsp 196file dev/isa/sbdsp.c sbdsp 197 198# SoundBlaster family 199device sb: audio, isadma, sbdsp, mulaw 200attach sb at isa 201file dev/isa/sb.c sb needs-flag 202 203# ProAudio Spectrum 204device pas: audio, isadma, sbdsp, mulaw 205attach pas at isa 206file dev/isa/pas.c pas needs-flag 207 208# AD1848 (CS4248, CS4231, AD1845) audio codec support; used by other drivers 209define ad1848 210file dev/isa/ad1848.c ad1848 211 212# ICS2101 mixer chip support; used by other drivers 213define ics2101 214file dev/isa/ics2101.c ics2101 215 216 217# Audio systems based on Echo Speech Corp. ESC61[45] ASICs 218device pss {[port = -1], [size = 0], 219 [iomem = -1], [iosiz = 0], 220 [irq = -1], [drq = -1]} 221attach pss at isa 222device sp: audio, isadma, ad1848 223attach sp at pss 224file dev/isa/pss.c pss needs-flag 225 226# Microsoft Windows Sound System 227device wss: audio, isadma, ad1848 228attach wss at isa 229file dev/isa/wss.c wss needs-flag 230 231# Gravis UltraSound & UltraSound MAX. 232# Use the "flags" keyword in a config file to specify an extra DMA 233# channel for full-duplex operation. 234device gus: audio, isadma, ics2101, ad1848, mulaw 235attach gus at isa 236file dev/isa/gus.c gus needs-flag 237