files.isa revision 1.10
1# $NetBSD: files.isa,v 1.10 1996/01/13 02:05:15 thorpej Exp $ 2# 3# Config.new file and device description for machine-independent ISA code. 4# Included by ports that need it. Requires that the SCSI files be 5# defined first. 6 7# ports should define their own "device isa" line (like the one below, 8# but with the correct bus attachment). IT MUST USE CONFIGURATION 9# LOCATORS IDENTICAL TO THOSE SPECIFIED BELOW. 10 11# ports should specify appropriate major numbers for the following 12# devices: 13# mcd, scd, wd, wt 14 15#device isa at root {[port = -1], [size = 0], 16# [iomem = -1], [iosiz = 0], 17# [irq = -1], [drq = -1]} 18file dev/isa/isa.c isa needs-flag 19 20# ISA DMA controller 21define isadma 22file dev/isa/isadma.c isadma needs-flag 23 24# 25# 8250/16[45]50-based multi-port serial boards 26# 27 28define commulti {[slave = -1]} 29 30# AST 4-port board 31device ast at isa: commulti 32file dev/isa/ast.c ast 33 34# BOCA 8-port board 35device boca at isa: commulti 36file dev/isa/boca.c boca 37 38# IBM RT PC 4-port board 39device rtfps at isa: commulti 40file dev/isa/rtfps.c rtfps 41 42# 43# Serial and parallel drivers 44# 45 46# 8250/16[45]50-based "com" ports 47device com at isa, commulti: tty 48file dev/isa/com.c com needs-flag 49 50# Cyclades Cyclom multiport serial cards 51# XXX currently broken 52device cy at isa: tty 53file dev/isa/cy.c cy needs-count 54 55# PC parallel ports (XXX what chip?) 56device lpt at isa 57file dev/isa/lpt.c lpt needs-flag 58 59# 60# SCSI host adapters 61# 62 63# Adaptec AHA-154x family 64device aha at isa: scsi, isadma 65file dev/isa/aha1542.c aha 66 67# Adapctec AIC-6[32]60 ICs 68device aic at isa: scsi, isadma 69file dev/isa/aic6360.c aic 70 71# Adaptec 7770-based EISA, VLB, etc. controllers 72device ahe at isa: scsi, aic7xxx 73file dev/isa/aha284x.c ahe 74 75# BusLogic BT-74x EISA family (XXX; should be EISA. it's special) 76device bt at isa: scsi, isadma 77file dev/isa/bt742a.c bt 78 79# Seagate ST0[12] ICs 80device sea at isa: scsi, isadma 81file dev/isa/seagate.c sea 82 83# UltraStor UHA-[13]4f boards 84device uha at isa: scsi, isadma 85file dev/isa/ultra14f.c uha 86 87# Western Digital WD7000 boards (XXX incomplete description) 88# XXX not yet working 89device wds at isa: scsi, isadma 90file dev/isa/wd7000.c wds 91 92# 93# Other ISA disk controllers 94# 95 96# Mitsumi CD-ROM controllers 97device mcd at isa: disk 98file dev/isa/mcd.c mcd needs-flag 99 100# Sony CDU-3[13]A CD-ROM drives 101device scd at isa: disk 102file dev/isa/scd.c scd needs-flag 103 104# ISA "wd" (ESDI/IDE/etc.) controllers 105device wdc at isa {drive = -1} 106device wd at wdc: disk, isadma 107file dev/isa/wd.c wdc needs-flag 108 109# Wangtek- and Archive-compatible tape controller boards 110device wt at isa: tape, isadma 111file dev/isa/wt.c wt needs-flag 112 113# 114# ISA networking drivers 115# 116 117# 3Com common probe code 118define elink 119file dev/isa/elink.c elink 120 121# National Semiconductor DS8390/WD83C690-based boards 122# (WD/SMC 80x3 family, SMC Ultra [8216], 3Com 3C503, NE[12]000, and clones) 123device ed at isa: ether, ifnet 124file dev/isa/if_ed.c ed 125 126# 3Com 3C505 127device eg at isa: ether, ifnet 128file dev/isa/if_eg.c eg 129 130# 3Com 3C501 131device el at isa: ether, ifnet 132file dev/isa/if_el.c el 133 134# 3Com 3C5x9, 3c59x (EtherLink III) family 135device ep at isa, pci: ether, ifnet, elink 136file dev/isa/if_ep.c ep 137 138# Fujitsu MB8696[05]-based boards 139# (Allied Telesis AT1700) 140device fe at isa: ether, ifnet 141file dev/isa/if_fe.c fe 142 143# HP Lan Ethernet controllers 144# XXX currently broken 145#device hp at isa: ether, ifnet 146#file dev/isa/if_hp.c hp 147 148# Intel i82586-based boards 149# (AT&T StarLAN 10, AT&T EN100, AT&T StarLAN Fiber, 3Com 3C507) 150device ie at isa: ether, ifnet, elink 151file dev/isa/if_ie.c ie 152 153# XXX ??? 154# XXX NOT IN TREE? 155#device ix at isa: ether, ifnet 156#file dev/isa/if_ix.c ix 157 158# AMD am7990 (Lance) -based boards 159# (BICC Isolan, NE2100, DEPCA) 160# XXX conflicts with alpha if_le.c 161#device le at isa: ether, ifnet, isadma 162#file dev/isa/if_le.c le 163 164# 165# ISA Sound hardware 166# 167 168# the SoundBlaster DSP, or close likenesses; used by other drivers 169define sbdsp 170file dev/isa/sbdsp.c sbdsp 171 172# SoundBlaster family 173device sb at isa: audio, isadma, sbdsp, mulaw 174file dev/isa/sb.c sb needs-flag 175 176# ProAudio Spectrum 177device pas at isa: audio, isadma, sbdsp, mulaw 178file dev/isa/pas.c pas needs-flag 179 180# AD1848 (CS4248, CS4231, AD1845) audio codec support; used by other drivers 181define ad1848 182file dev/isa/ad1848.c ad1848 183 184# ICS2101 mixer chip support; used by other drivers 185define ics2101 186file dev/isa/ics2101.c ics2101 187 188 189# Audio systems based on Echo Speech Corp. ESC61[45] ASICs 190device pss at isa {[port = -1], [size = 0], 191 [iomem = -1], [iosiz = 0], 192 [irq = -1], [drq = -1]} 193device sp at pss: audio, isadma, ad1848 194file dev/isa/pss.c pss needs-flag 195 196# Microsoft Windows Sound System 197device wss at isa: audio, isadma, ad1848 198file dev/isa/wss.c wss needs-flag 199 200# Gravis UltraSound & UltraSound MAX. 201# Use the "flags" keyword in a config file to specify an extra DMA 202# channel for full-duplex operation. 203device gus at isa: audio, isadma, ics2101, ad1848, mulaw 204file dev/isa/gus.c gus needs-flag 205