1/* $NetBSD: siopreg.h,v 1.21 2009/09/04 18:40:19 tsutsui Exp $ */ 2 3/* 4 * Copyright (c) 2000 Manuel Bouyer. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 * 26 */ 27 28/* 29 * Devices definitions for Symbios/NCR M53c8xx PCI-SCSI I/O Processors 30 * Docs available from http://www.symbios.com/ 31 */ 32 33#define SIOP_SCNTL0 0x00 /* SCSI control 0, R/W */ 34#define SCNTL0_ARB_MASK 0xc0 35#define SCNTL0_SARB 0x00 36#define SCNTL0_FARB 0xc0 37#define SCNTL0_START 0x20 38#define SCNTL0_WATM 0x10 39#define SCNTL0_EPC 0x08 40#define SCNTL0_AAP 0x02 41#define SCNTL0_TRG 0x01 42 43#define SIOP_SCNTL1 0x01 /* SCSI control 1, R/W */ 44#define SCNTL1_EXC 0x80 45#define SCNTL1_ADB 0x40 46#define SCNTL1_DHP 0x20 47#define SCNTL1_CON 0x10 48#define SCNTL1_RST 0x08 49#define SCNTL1_AESP 0x04 50#define SCNTL1_IARB 0x02 51#define SCNTL1_SST 0x01 52 53#define SIOP_SCNTL2 0x02 /* SCSI control 2, R/W */ 54#define SCNTL2_SDU 0x80 55#define SCNTL2_CHM 0x40 /* 875 only */ 56#define SCNTL2_SLPMD 0x20 /* 875 only */ 57#define SCNTL2_SLPHBEN 0x10 /* 875 only */ 58#define SCNTL2_WSS 0x08 /* 875 only */ 59#define SCNTL2_VUE0 0x04 /* 875 only */ 60#define SCNTL2_VUE1 0x02 /* 875 only */ 61#define SCNTL2_WSR 0x01 /* 875 only */ 62 63#define SIOP_SCNTL3 0x03 /* SCSI control 3, R/W */ 64#define SCNTL3_ULTRA 0x80 /* 875 only */ 65#define SCNTL3_SCF_SHIFT 4 66#define SCNTL3_SCF_MASK 0x70 67#define SCNTL3_EWS 0x08 /* 875 only */ 68#define SCNTL3_CCF_SHIFT 0 69#define SCNTL3_CCF_MASK 0x07 70 71/* periods for various SCF values, assume transfer period of 4 */ 72struct scf_period { 73 int clock; /* clock period (ns * 10) */ 74 int period; /* scsi period, as set in the SDTR message */ 75 int scf; /* scf value to use */ 76}; 77 78static const struct scf_period scf_period[] __unused = { 79 {250, 25, 1}, /* 10.0 MHz */ 80 {250, 37, 2}, /* 6.67 MHz */ 81 {250, 50, 3}, /* 5.00 MHz */ 82 {250, 75, 4}, /* 3.33 MHz */ 83 {125, 12, 1}, /* 20.0 MHz */ 84 {125, 18, 2}, /* 13.3 MHz */ 85 {125, 25, 3}, /* 10.0 MHz */ 86 {125, 37, 4}, /* 6.67 MHz */ 87 {125, 50, 5}, /* 5.0 MHz */ 88 { 62, 10, 1}, /* 40.0 MHz */ 89 { 62, 12, 3}, /* 20.0 MHz */ 90 { 62, 18, 4}, /* 13.3 MHz */ 91 { 62, 25, 5}, /* 10.0 MHz */ 92}; 93 94static const struct scf_period dt_scf_period[] __unused = { 95 { 62, 9, 1}, /* 80.0 MHz */ 96 { 62, 10, 3}, /* 40.0 MHz */ 97 { 62, 12, 5}, /* 20.0 MHz */ 98 { 62, 18, 6}, /* 13.3 MHz */ 99 { 62, 25, 7}, /* 10.0 MHz */ 100}; 101 102#define SIOP_SCID 0x04 /* SCSI chip ID R/W */ 103#define SCID_RRE 0x40 104#define SCID_SRE 0x20 105#define SCID_ENCID_SHIFT 0 106#define SCID_ENCID_MASK 0x07 107 108#define SIOP_SXFER 0x05 /* SCSI transfer, R/W */ 109#define SXFER_TP_SHIFT 5 110#define SXFER_TP_MASK 0xe0 111#define SXFER_MO_SHIFT 0 112#define SXFER_MO_MASK 0x3f 113 114#define SIOP_SDID 0x06 /* SCSI destination ID, R/W */ 115#define SDID_ENCID_SHIFT 0 116#define SDID_ENCID_MASK 0x07 117 118#define SIOP_GPREG 0x07 /* General purpose, R/W */ 119#define GPREG_GPIO4 0x10 /* 875 only */ 120#define GPREG_GPIO3 0x08 /* 875 only */ 121#define GPREG_GPIO2 0x04 /* 875 only */ 122#define GPREG_GPIO1 0x02 123#define GPREG_GPIO0 0x01 124 125#define SIOP_SFBR 0x08 /* SCSI first byte received, R/W */ 126 127#define SIOP_SOCL 0x09 /* SCSI output control latch, RW */ 128 129#define SIOP_SSID 0x0A /* SCSI selector ID, RO */ 130#define SSID_VAL 0x80 131#define SSID_ENCID_SHIFT 0 132#define SSID_ENCID_MASK 0x0f 133 134#define SIOP_SBCL 0x0B /* SCSI control line, RO */ 135 136#define SIOP_DSTAT 0x0C /* DMA status, RO */ 137#define DSTAT_DFE 0x80 138#define DSTAT_MDPE 0x40 139#define DSTAT_BF 0x20 140#define DSTAT_ABRT 0x10 141#define DSTAT_SSI 0x08 142#define DSTAT_SIR 0x04 143#define DSTAT_IID 0x01 144 145#define SIOP_SSTAT0 0x0D /* STSI status 0, RO */ 146#define SSTAT0_ILF 0x80 147#define SSTAT0_ORF 0x40 148#define SSTAT0_OLF 0x20 149#define SSTAT0_AIP 0x10 150#define SSTAT0_LOA 0x08 151#define SSTAT0_WOA 0x04 152#define SSTAT0_RST 0x02 153#define SSTAT0_SDP 0x01 154 155#define SIOP_SSTAT1 0x0E /* STSI status 1, RO */ 156#define SSTAT1_FFO_SHIFT 4 157#define SSTAT1_FFO_MASK 0x80 158#define SSTAT1_SDPL 0x08 159#define SSTAT1_MSG 0x04 160#define SSTAT1_CD 0x02 161#define SSTAT1_IO 0x01 162#define SSTAT1_PHASE_MASK (SSTAT1_IO | SSTAT1_CD | SSTAT1_MSG) 163#define SSTAT1_PHASE_DATAOUT 0 164#define SSTAT1_PHASE_DATAIN SSTAT1_IO 165#define SSTAT1_PHASE_CMD SSTAT1_CD 166#define SSTAT1_PHASE_STATUS (SSTAT1_CD | SSTAT1_IO) 167#define SSTAT1_PHASE_MSGOUT (SSTAT1_MSG | SSTAT1_CD) 168#define SSTAT1_PHASE_MSGIN (SSTAT1_MSG | SSTAT1_CD | SSTAT1_IO) 169 170#define SIOP_SSTAT2 0x0F /* STSI status 2, RO */ 171#define SSTAT2_ILF1 0x80 /* 875 only */ 172#define SSTAT2_ORF1 0x40 /* 875 only */ 173#define SSTAT2_OLF1 0x20 /* 875 only */ 174#define SSTAT2_FF4 0x10 /* 875 only */ 175#define SSTAT2_SPL1 0x08 /* 875 only */ 176#define SSTAT2_DF 0x04 /* 875 only */ 177#define SSTAT2_LDSC 0x02 178#define SSTAT2_SDP1 0x01 /* 875 only */ 179 180#define SIOP_DSA 0x10 /* data struct addr, R/W */ 181 182#define SIOP_ISTAT 0x14 /* IRQ status, R/W */ 183#define ISTAT_ABRT 0x80 184#define ISTAT_SRST 0x40 185#define ISTAT_SIGP 0x20 186#define ISTAT_SEM 0x10 187#define ISTAT_CON 0x08 188#define ISTAT_INTF 0x04 189#define ISTAT_SIP 0x02 190#define ISTAT_DIP 0x01 191 192#define SIOP_CTEST0 0x18 /* Chip test 0, R/W */ 193#define CTEST0_EHP 0x04 /* 720/770 */ 194 195#define SIOP_CTEST1 0x19 /* Chip test 1, R/W */ 196 197#define SIOP_CTEST2 0x1A /* Chip test 2, R/W */ 198#define CTEST2_SRTCH 0x04 /* 875 only */ 199 200#define SIOP_CTEST3 0x1B /* Chip test 3, R/W */ 201#define CTEST3_FLF 0x08 202#define CTEST3_CLF 0x04 203#define CTEST3_FM 0x02 204#define CTEST3_WRIE 0x01 205 206#define SIOP_TEMP 0x1C /* Temp register (used by CALL/RET), R/W */ 207 208#define SIOP_DFIFO 0x20 /* DMA FIFO */ 209 210#define SIOP_CTEST4 0x21 /* Chip test 4, R/W */ 211#define CTEST4_MUX 0x80 /* 720/770 */ 212#define CTEST4_BDIS 0x80 213#define CTEST_ZMOD 0x40 214#define CTEST_ZSD 0x20 215#define CTEST_SRTM 0x10 216#define CTEST_MPEE 0x08 217 218#define SIOP_CTEST5 0x22 /* Chip test 5, R/W */ 219#define CTEST5_ADCK 0x80 220#define CTEST5_BBCK 0x40 221#define CTEST5_DFS 0x20 222#define CTEST5_MASR 0x10 223#define CTEST5_DDIR 0x08 224#define CTEST5_BOMASK 0x03 225 226#define SIOP_CTEST6 0x23 /* Chip test 6, R/W */ 227 228#define SIOP_DBC 0x24 /* DMA byte counter, R/W */ 229 230#define SIOP_DCMD 0x27 /* DMA command, R/W */ 231 232#define SIOP_DNAD 0x28 /* DMA next addr, R/W */ 233 234#define SIOP_DSP 0x2C /* DMA scripts pointer, R/W */ 235 236#define SIOP_DSPS 0x30 /* DMA scripts pointer save, R/W */ 237 238#define SIOP_SCRATCHA 0x34 /* scratch register A. R/W */ 239 240#define SIOP_DMODE 0x38 /* DMA mode, R/W */ 241#define DMODE_BL_SHIFT 6 242#define DMODE_BL_MASK 0xC0 243#define DMODE_SIOM 0x20 244#define DMODE_DIOM 0x10 245#define DMODE_ERL 0x08 246#define DMODE_ERMP 0x04 247#define DMODE_BOF 0x02 248#define DMODE_MAN 0x01 249 250#define SIOP_DIEN 0x39 /* DMA interrupt enable, R/W */ 251#define DIEN_MDPE 0x40 252#define DIEN_BF 0x20 253#define DIEN_AVRT 0x10 254#define DIEN_SSI 0x08 255#define DIEN_SIR 0x04 256#define DIEN_IID 0x01 257 258#define SIOP_SBR 0x3A /* scratch byte register, R/W */ 259 260#define SIOP_DCNTL 0x3B /* DMA control, R/W */ 261#define DCNTL_CLSE 0x80 262#define DCNTL_PFF 0x40 263#define DCNTL_EA 0x20 /* 720/770 */ 264#define DCNTL_PFEN 0x20 /* 8xx */ 265#define DCNTL_SSM 0x10 266#define DCNTL_IRQM 0x08 267#define DCNTL_STD 0x04 268#define DCNTL_IRQD 0x02 269#define DCNTL_COM 0x01 270 271#define SIOP_ADDER 0x3C /* adder output sum, RO */ 272 273#define SIOP_SIEN0 0x40 /* SCSI interrupt enable 0, R/W */ 274#define SIEN0_MA 0x80 275#define SIEN0_CMP 0x40 276#define SIEN0_SEL 0x20 277#define SIEN0_RSL 0x10 278#define SIEN0_SGE 0x08 279#define SIEN0_UDC 0x04 280#define SIEN0_SRT 0x02 281#define SIEN0_PAR 0x01 282 283#define SIOP_SIEN1 0x41 /* SCSI interrupt enable 1, R/W */ 284#define SIEN1_SBMC 0x10 /* 895 only */ 285#define SIEN1_STO 0x04 286#define SIEN1_GEN 0x02 287#define SIEN1_HTH 0x01 288 289#define SIOP_SIST0 0x42 /* SCSI interrupt status 0, RO */ 290#define SIST0_MA 0x80 291#define SIST0_CMP 0x40 292#define SIST0_SEL 0x20 293#define SIST0_RSL 0x10 294#define SIST0_SGE 0x08 295#define SIST0_UDC 0x04 296#define SIST0_RST 0x02 297#define SIST0_PAR 0x01 298 299#define SIOP_SIST1 0x43 /* SCSI interrupt status 1, RO */ 300#define SIST1_SBMC 0x10 /* 895 only */ 301#define SIST1_STO 0x04 302#define SIST1_GEN 0x02 303#define SIST1_HTH 0x01 304 305#define SIOP_SLPAR 0x44 /* scsi longitudinal parity, R/W */ 306 307#define SIOP_SWIDE 0x45 /* scsi wide residue, RW, 875 only */ 308 309#define SIOP_MACNTL 0x46 /* memory access control, R/W */ 310 311#define SIOP_GPCNTL 0x47 /* General Purpose Pin control, R/W */ 312#define GPCNTL_ME 0x80 /* 875 only */ 313#define GPCNTL_FE 0x40 /* 875 only */ 314#define GPCNTL_IN4 0x10 /* 875 only */ 315#define GPCNTL_IN3 0x08 /* 875 only */ 316#define GPCNTL_IN2 0x04 /* 875 only */ 317#define GPCNTL_IN1 0x02 318#define GPCNTL_IN0 0x01 319 320#define SIOP_STIME0 0x48 /* SCSI timer 0, R/W */ 321#define STIME0_HTH_SHIFT 4 322#define STIME0_HTH_MASK 0xf0 323#define STIME0_SEL_SHIFT 0 324#define STIME0_SEL_MASK 0x0f 325 326#define SIOP_STIME1 0x49 /* SCSI timer 1, R/W */ 327#define STIME1_HTHBA 0x40 /* 875 only */ 328#define STIME1_GENSF 0x20 /* 875 only */ 329#define STIME1_HTHSF 0x10 /* 875 only */ 330#define STIME1_GEN_SHIFT 0 331#define STIME1_GEN_MASK 0x0f 332 333#define SIOP_RESPID0 0x4A /* response ID, R/W */ 334 335#define SIOP_RESPID1 0x4B /* response ID, R/W, 875-only */ 336 337#define SIOP_STEST0 0x4C /* SCSI test 0, RO */ 338 339#define SIOP_STEST1 0x4D /* SCSI test 1, RO, RW on 875 */ 340#define STEST1_DOGE 0x20 /* 1010 only */ 341#define STEST1_DIGE 0x10 /* 1010 only */ 342#define STEST1_DBLEN 0x08 /* 875-only */ 343#define STEST1_DBLSEL 0x04 /* 875-only */ 344#define STEST1_SCLK 0x80 345 346#define SIOP_STEST2 0x4E /* SCSI test 2, RO, R/W on 875 */ 347#define STEST2_DIF 0x20 /* 875 only */ 348#define STEST2_EXT 0x02 349 350#define SIOP_STEST3 0x4F /* SCSI test 3, RO, RW on 875 */ 351#define STEST3_TE 0x80 352#define STEST3_HSC 0x20 353 354#define SIOP_STEST4 0x52 /* SCSI test 4, 895 only */ 355#define STEST4_MODE_MASK 0xc0 356#define STEST4_MODE_DIF 0x40 357#define STEST4_MODE_SE 0x80 358#define STEST4_MODE_LVD 0xc0 359#define STEST4_LOCK 0x20 360#define STEST4_ 361 362#define SIOP_SIDL 0x50 /* SCSI input data latch, RO */ 363 364#define SIOP_SODL 0x54 /* SCSI output data latch, R/W */ 365 366#define SIOP_SBDL 0x58 /* SCSI bus data lines, RO */ 367 368#define SIOP_SCRATCHB 0x5C /* Scratch register B, R/W */ 369 370#define SIOP_SCRATCHC 0x60 /* Scratch register C, R/W, 875 only */ 371 372#define SIOP_SCRATCHD 0x64 /* Scratch register D, R/W, 875-only */ 373 374#define SIOP_SCRATCHE 0x68 /* Scratch register E, R/W, 875-only */ 375 376#define SIOP_SCRATCHF 0x6c /* Scratch register F, R/W, 875-only */ 377 378#define SIOP_SCRATCHG 0x70 /* Scratch register G, R/W, 875-only */ 379 380#define SIOP_SCRATCHH 0x74 /* Scratch register H, R/W, 875-only */ 381 382#define SIOP_SCRATCHI 0x78 /* Scratch register I, R/W, 875-only */ 383 384#define SIOP_SCRATCHJ 0x7c /* Scratch register J, R/W, 875-only */ 385 386#define SIOP_SCNTL4 0xBC /* SCSI control 4, R/W, 1010-only */ 387#define SCNTL4_XCLKS_ST 0x01 388#define SCNTL4_XCLKS_DT 0x02 389#define SCNTL4_XCLKH_ST 0x04 390#define SCNTL4_XCLKH_DT 0x08 391#define SCNTL4_AIPEN 0x40 392#define SCNTL4_U3EN 0x80 393 394#define SIOP_DFBC 0xf0 /* DMA fifo byte count, RO */ 395 396#define SIOP_AIPCNTL0 0xbe /* AIP Control 0, 1010-only */ 397#define AIPCNTL0_ERRLIVE 0x04 /* AIP error status, live */ 398#define AIPCNTL0_ERR 0x02 /* AIP error status, latched */ 399#define AIPCNTL0_PARITYERRs 0x01 /* Parity error */ 400 401#define SIOP_AIPCNTL1 0xbf /* AIP Control 1, 1010-only */ 402#define AIPCNTL1_DIS 0x08 /* disable AIP generation, 1010-66 only */ 403#define AIPCNTL1_RSETERR 0x04 /* reset AIP error 1010-66 only */ 404#define AIPCNTL1_FB 0x02 /* force bad AIP value 1010-66 only */ 405#define AIPCNTL1_RSET 0x01 /* reset AIP sequence value 1010-66 only */ 406 407/* 408 * Non-volatile configuration settings stored in the EEPROM. There 409 * are at least two known formats: Symbios Logic format and Tekram format. 410 */ 411 412#define SIOP_NVRAM_SYM_SIZE 368 413#define SIOP_NVRAM_SYM_ADDRESS 0x100 414 415struct nvram_symbios { 416 /* Header (6 bytes) */ 417 uint16_t type; /* 0x0000 */ 418 uint16_t byte_count; /* excluding header/trailer */ 419 uint16_t checksum; 420 421 /* Adapter configuration (20 bytes) */ 422 uint8_t v_major; 423 uint8_t v_minor; 424 uint32_t boot_crc; 425 uint16_t flags; 426#define NVRAM_SYM_F_SCAM_ENABLE 0x0001 427#define NVRAM_SYM_F_PARITY_ENABLE 0x0002 428#define NVRAM_SYM_F_VERBOSE_MESSAGES 0x0004 429#define NVRAM_SYM_F_CHS_MAPPING 0x0008 430 uint16_t flags1; 431#define NVRAM_SYM_F1_SCAN_HI_LO 0x0001 432 uint16_t term_state; 433#define NVRAM_SYM_TERM_CANT_PROGRAM 0 434#define NVRAM_SYM_TERM_ENABLED 1 435#define NVRAM_SYM_TERM_DISABLED 2 436 uint16_t rmvbl_flags; 437#define NVRAM_SYM_RMVBL_NO_SUPPORT 0 438#define NVRAM_SYM_RMVBL_BOOT_DEVICE 1 439#define NVRAM_SYM_RMVBL_MEDIA_INSTALLED 2 440 uint8_t host_id; 441 uint8_t num_hba; 442 uint8_t num_devices; 443 uint8_t max_scam_devices; 444 uint8_t num_valid_scam_devices; 445 uint8_t rsvd; 446 447 /* Boot order (14 bytes x 4) */ 448 struct nvram_symbios_host { 449 uint16_t type; /* 4 - 8xx */ 450 uint16_t device_id; /* PCI device ID */ 451 uint16_t vendor_id; /* PCI vendor ID */ 452 uint8_t bus_nr; /* PCI bus number */ 453 uint8_t device_fn; /* PCI device/func # << 3 */ 454 uint16_t word8; 455 uint16_t flags; 456#define NVRAM_SYM_HOST_F_SCAN_AT_BOOT 0x0001 457 uint16_t io_port; /* PCI I/O address */ 458 } __packed host[4]; 459 460 /* Targets (8 bytes x 16) */ 461 struct nvram_symbios_target { 462 uint8_t flags; 463#define NVRAM_SYM_TARG_F_DISCONNECT_EN 0x0001 464#define NVRAM_SYM_TARG_F_SCAN_AT_BOOT 0x0002 465#define NVRAM_SYM_TARG_F_SCAN_LUNS 0x0004 466#define NVRAM_SYM_TARG_F_TQ_EN 0x0008 467 uint8_t rsvd; 468 uint8_t bus_width; 469 uint8_t sync_offset; /* 8, 16, etc. */ 470 uint16_t sync_period; /* 4 * factor */ 471 uint16_t timeout; 472 } __packed target[16]; 473 474 /* SCAM table (8 bytes x 4) */ 475 struct nvram_symbios_scam { 476 uint16_t id; 477 uint16_t method; 478#define NVRAM_SYM_SCAM_DEFAULT_METHOD 0 479#define NVRAM_SYM_SCAM_DONT_ASSIGN 1 480#define NVRAM_SYM_SCAM_SET_SPECIFIC_ID 2 481#define NVRAM_SYM_SCAM_USE_ORDER_GIVEN 3 482 uint16_t status; 483#define NVRAM_SYM_SCAM_UNKNOWN 0 484#define NVRAM_SYM_SCAM_DEVICE_NOT_FOUND 1 485#define NVRAM_SYM_SCAM_ID_NOT_SET 2 486#define NVRAM_SYM_SCAM_ID_VALID 3 487 uint8_t target_id; 488 uint8_t rsvd; 489 } __packed scam[4]; 490 491 uint8_t spare_devices[15 * 8]; 492 uint8_t trailer[6]; /* 0xfe 0xfe 0x00 0x00 0x00 0x00 */ 493} __packed; 494 495#define SIOP_NVRAM_TEK_SIZE 64 496#define SIOP_NVRAM_TEK_93c46_ADDRESS 0 497#define SIOP_NVRAM_TEK_24c16_ADDRESS 0x40 498 499static const uint8_t tekram_sync_table[16] __unused = { 500 25, 31, 37, 43, 501 50, 62, 75, 125, 502 12, 15, 18, 21, 503 6, 7, 9, 10, 504}; 505 506struct nvram_tekram { 507 struct nvram_tekram_target { 508 uint8_t flags; 509#define NVRAM_TEK_TARG_F_PARITY_CHECK 0x01 510#define NVRAM_TEK_TARG_F_SYNC_NEGO 0x02 511#define NVRAM_TEK_TARG_F_DISCONNECT_EN 0x04 512#define NVRAM_TEK_TARG_F_START_CMD 0x08 513#define NVRAM_TEK_TARG_F_TQ_EN 0x10 514#define NVRAM_TEK_TARG_F_WIDE_NEGO 0x20 515 uint8_t sync_index; 516 uint16_t word2; 517 } __packed target[16]; 518 uint8_t host_id; 519 uint8_t flags; 520#define NVRAM_TEK_F_MORE_THAN_2_DRIVES 0x01 521#define NVRAM_TEK_F_DRIVES_SUP_1G 0x02 522#define NVRAM_TEK_F_RESET_ON_POWER_ON 0x04 523#define NVRAM_TEK_F_ACTIVE_NEGATION 0x08 524#define NVRAM_TEK_F_IMMEDIATE_SEEK 0x10 525#define NVRAM_TEK_F_SCAN_LUNS 0x20 526#define NVRAM_TEK_F_REMOVABLE_FLAGS 0xc0 /* 0 dis, 1 boot, 2 all */ 527 uint8_t boot_delay_index; 528 uint8_t max_tags_index; 529 uint16_t flags1; 530#define NVRAM_TEK_F_F2_F6_ENABLED 0x0001 531 uint16_t spare[29]; 532} __packed; 533