i82557.c revision 1.51
1/* $NetBSD: i82557.c,v 1.51 2001/05/22 00:27:01 thorpej Exp $ */ 2 3/*- 4 * Copyright (c) 1997, 1998, 1999 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, 9 * NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. All advertising materials mentioning features or use of this software 20 * must display the following acknowledgement: 21 * This product includes software developed by the NetBSD 22 * Foundation, Inc. and its contributors. 23 * 4. Neither the name of The NetBSD Foundation nor the names of its 24 * contributors may be used to endorse or promote products derived 25 * from this software without specific prior written permission. 26 * 27 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 28 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 29 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 31 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 32 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 33 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 34 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 35 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 36 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37 * POSSIBILITY OF SUCH DAMAGE. 38 */ 39 40/* 41 * Copyright (c) 1995, David Greenman 42 * All rights reserved. 43 * 44 * Redistribution and use in source and binary forms, with or without 45 * modification, are permitted provided that the following conditions 46 * are met: 47 * 1. Redistributions of source code must retain the above copyright 48 * notice unmodified, this list of conditions, and the following 49 * disclaimer. 50 * 2. Redistributions in binary form must reproduce the above copyright 51 * notice, this list of conditions and the following disclaimer in the 52 * documentation and/or other materials provided with the distribution. 53 * 54 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 55 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 56 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 57 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 58 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 59 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 60 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 61 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 62 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 63 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 64 * SUCH DAMAGE. 65 * 66 * Id: if_fxp.c,v 1.47 1998/01/08 23:42:29 eivind Exp 67 */ 68 69/* 70 * Device driver for the Intel i82557 fast Ethernet controller, 71 * and its successors, the i82558 and i82559. 72 */ 73 74#include "opt_inet.h" 75#include "opt_ns.h" 76#include "bpfilter.h" 77#include "rnd.h" 78 79#include <sys/param.h> 80#include <sys/systm.h> 81#include <sys/callout.h> 82#include <sys/mbuf.h> 83#include <sys/malloc.h> 84#include <sys/kernel.h> 85#include <sys/socket.h> 86#include <sys/ioctl.h> 87#include <sys/errno.h> 88#include <sys/device.h> 89 90#include <machine/endian.h> 91 92#include <uvm/uvm_extern.h> 93 94#if NRND > 0 95#include <sys/rnd.h> 96#endif 97 98#include <net/if.h> 99#include <net/if_dl.h> 100#include <net/if_media.h> 101#include <net/if_ether.h> 102 103#if NBPFILTER > 0 104#include <net/bpf.h> 105#endif 106 107#ifdef INET 108#include <netinet/in.h> 109#include <netinet/if_inarp.h> 110#endif 111 112#ifdef NS 113#include <netns/ns.h> 114#include <netns/ns_if.h> 115#endif 116 117#include <machine/bus.h> 118#include <machine/intr.h> 119 120#include <dev/mii/miivar.h> 121 122#include <dev/ic/i82557reg.h> 123#include <dev/ic/i82557var.h> 124 125/* 126 * NOTE! On the Alpha, we have an alignment constraint. The 127 * card DMAs the packet immediately following the RFA. However, 128 * the first thing in the packet is a 14-byte Ethernet header. 129 * This means that the packet is misaligned. To compensate, 130 * we actually offset the RFA 2 bytes into the cluster. This 131 * alignes the packet after the Ethernet header at a 32-bit 132 * boundary. HOWEVER! This means that the RFA is misaligned! 133 */ 134#define RFA_ALIGNMENT_FUDGE 2 135 136/* 137 * Template for default configuration parameters. 138 * See struct fxp_cb_config for the bit definitions. 139 */ 140u_int8_t fxp_cb_config_template[] = { 141 0x0, 0x0, /* cb_status */ 142 0x80, 0x2, /* cb_command */ 143 0xff, 0xff, 0xff, 0xff, /* link_addr */ 144 0x16, /* 0 */ 145 0x8, /* 1 */ 146 0x0, /* 2 */ 147 0x0, /* 3 */ 148 0x0, /* 4 */ 149 0x80, /* 5 */ 150 0xb2, /* 6 */ 151 0x3, /* 7 */ 152 0x1, /* 8 */ 153 0x0, /* 9 */ 154 0x26, /* 10 */ 155 0x0, /* 11 */ 156 0x60, /* 12 */ 157 0x0, /* 13 */ 158 0xf2, /* 14 */ 159 0x48, /* 15 */ 160 0x0, /* 16 */ 161 0x40, /* 17 */ 162 0xf3, /* 18 */ 163 0x0, /* 19 */ 164 0x3f, /* 20 */ 165 0x5 /* 21 */ 166}; 167 168void fxp_mii_initmedia(struct fxp_softc *); 169int fxp_mii_mediachange(struct ifnet *); 170void fxp_mii_mediastatus(struct ifnet *, struct ifmediareq *); 171 172void fxp_80c24_initmedia(struct fxp_softc *); 173int fxp_80c24_mediachange(struct ifnet *); 174void fxp_80c24_mediastatus(struct ifnet *, struct ifmediareq *); 175 176void fxp_start(struct ifnet *); 177int fxp_ioctl(struct ifnet *, u_long, caddr_t); 178void fxp_watchdog(struct ifnet *); 179int fxp_init(struct ifnet *); 180void fxp_stop(struct ifnet *, int); 181 182void fxp_rxdrain(struct fxp_softc *); 183int fxp_add_rfabuf(struct fxp_softc *, bus_dmamap_t, int); 184int fxp_mdi_read(struct device *, int, int); 185void fxp_statchg(struct device *); 186void fxp_mdi_write(struct device *, int, int, int); 187void fxp_autosize_eeprom(struct fxp_softc*); 188void fxp_read_eeprom(struct fxp_softc *, u_int16_t *, int, int); 189void fxp_get_info(struct fxp_softc *, u_int8_t *); 190void fxp_tick(void *); 191void fxp_mc_setup(struct fxp_softc *); 192 193void fxp_shutdown(void *); 194void fxp_power(int, void *); 195 196int fxp_copy_small = 0; 197 198struct fxp_phytype { 199 int fp_phy; /* type of PHY, -1 for MII at the end. */ 200 void (*fp_init)(struct fxp_softc *); 201} fxp_phytype_table[] = { 202 { FXP_PHY_80C24, fxp_80c24_initmedia }, 203 { -1, fxp_mii_initmedia }, 204}; 205 206/* 207 * Set initial transmit threshold at 64 (512 bytes). This is 208 * increased by 64 (512 bytes) at a time, to maximum of 192 209 * (1536 bytes), if an underrun occurs. 210 */ 211static int tx_threshold = 64; 212 213/* 214 * Wait for the previous command to be accepted (but not necessarily 215 * completed). 216 */ 217static __inline void 218fxp_scb_wait(struct fxp_softc *sc) 219{ 220 int i = 10000; 221 222 while (CSR_READ_1(sc, FXP_CSR_SCB_COMMAND) && --i) 223 delay(2); 224 if (i == 0) 225 printf("%s: WARNING: SCB timed out!\n", sc->sc_dev.dv_xname); 226} 227 228/* 229 * Submit a command to the i82557. 230 */ 231static __inline void 232fxp_scb_cmd(struct fxp_softc *sc, u_int8_t cmd) 233{ 234 235 if (cmd == FXP_SCB_COMMAND_CU_RESUME && 236 (sc->sc_flags & FXPF_FIX_RESUME_BUG) != 0) { 237 CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, FXP_SCB_COMMAND_CU_NOP); 238 fxp_scb_wait(sc); 239 } 240 CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, cmd); 241} 242 243/* 244 * Finish attaching an i82557 interface. Called by bus-specific front-end. 245 */ 246void 247fxp_attach(struct fxp_softc *sc) 248{ 249 u_int8_t enaddr[ETHER_ADDR_LEN]; 250 struct ifnet *ifp; 251 bus_dma_segment_t seg; 252 int rseg, i, error; 253 struct fxp_phytype *fp; 254 255 callout_init(&sc->sc_callout); 256 257 /* 258 * Allocate the control data structures, and create and load the 259 * DMA map for it. 260 */ 261 if ((error = bus_dmamem_alloc(sc->sc_dmat, 262 sizeof(struct fxp_control_data), PAGE_SIZE, 0, &seg, 1, &rseg, 263 0)) != 0) { 264 printf("%s: unable to allocate control data, error = %d\n", 265 sc->sc_dev.dv_xname, error); 266 goto fail_0; 267 } 268 269 if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, 270 sizeof(struct fxp_control_data), (caddr_t *)&sc->sc_control_data, 271 BUS_DMA_COHERENT)) != 0) { 272 printf("%s: unable to map control data, error = %d\n", 273 sc->sc_dev.dv_xname, error); 274 goto fail_1; 275 } 276 sc->sc_cdseg = seg; 277 sc->sc_cdnseg = rseg; 278 279 bzero(sc->sc_control_data, sizeof(struct fxp_control_data)); 280 281 if ((error = bus_dmamap_create(sc->sc_dmat, 282 sizeof(struct fxp_control_data), 1, 283 sizeof(struct fxp_control_data), 0, 0, &sc->sc_dmamap)) != 0) { 284 printf("%s: unable to create control data DMA map, " 285 "error = %d\n", sc->sc_dev.dv_xname, error); 286 goto fail_2; 287 } 288 289 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap, 290 sc->sc_control_data, sizeof(struct fxp_control_data), NULL, 291 0)) != 0) { 292 printf("%s: can't load control data DMA map, error = %d\n", 293 sc->sc_dev.dv_xname, error); 294 goto fail_3; 295 } 296 297 /* 298 * Create the transmit buffer DMA maps. 299 */ 300 for (i = 0; i < FXP_NTXCB; i++) { 301 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 302 FXP_NTXSEG, MCLBYTES, 0, 0, 303 &FXP_DSTX(sc, i)->txs_dmamap)) != 0) { 304 printf("%s: unable to create tx DMA map %d, " 305 "error = %d\n", sc->sc_dev.dv_xname, i, error); 306 goto fail_4; 307 } 308 } 309 310 /* 311 * Create the receive buffer DMA maps. 312 */ 313 for (i = 0; i < FXP_NRFABUFS; i++) { 314 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, 315 MCLBYTES, 0, 0, &sc->sc_rxmaps[i])) != 0) { 316 printf("%s: unable to create rx DMA map %d, " 317 "error = %d\n", sc->sc_dev.dv_xname, i, error); 318 goto fail_5; 319 } 320 } 321 322 /* Initialize MAC address and media structures. */ 323 fxp_get_info(sc, enaddr); 324 325 printf("%s: Ethernet address %s\n", sc->sc_dev.dv_xname, 326 ether_sprintf(enaddr)); 327 328 ifp = &sc->sc_ethercom.ec_if; 329 330 /* 331 * Get info about our media interface, and initialize it. Note 332 * the table terminates itself with a phy of -1, indicating 333 * that we're using MII. 334 */ 335 for (fp = fxp_phytype_table; fp->fp_phy != -1; fp++) 336 if (fp->fp_phy == sc->phy_primary_device) 337 break; 338 (*fp->fp_init)(sc); 339 340 bcopy(sc->sc_dev.dv_xname, ifp->if_xname, IFNAMSIZ); 341 ifp->if_softc = sc; 342 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 343 ifp->if_ioctl = fxp_ioctl; 344 ifp->if_start = fxp_start; 345 ifp->if_watchdog = fxp_watchdog; 346 ifp->if_init = fxp_init; 347 ifp->if_stop = fxp_stop; 348 IFQ_SET_READY(&ifp->if_snd); 349 350 /* 351 * We can support 802.1Q VLAN-sized frames. 352 */ 353 sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU; 354 355 /* 356 * Attach the interface. 357 */ 358 if_attach(ifp); 359 ether_ifattach(ifp, enaddr); 360#if NRND > 0 361 rnd_attach_source(&sc->rnd_source, sc->sc_dev.dv_xname, 362 RND_TYPE_NET, 0); 363#endif 364 365 /* 366 * Add shutdown hook so that DMA is disabled prior to reboot. Not 367 * doing do could allow DMA to corrupt kernel memory during the 368 * reboot before the driver initializes. 369 */ 370 sc->sc_sdhook = shutdownhook_establish(fxp_shutdown, sc); 371 if (sc->sc_sdhook == NULL) 372 printf("%s: WARNING: unable to establish shutdown hook\n", 373 sc->sc_dev.dv_xname); 374 /* 375 * Add suspend hook, for similar reasons.. 376 */ 377 sc->sc_powerhook = powerhook_establish(fxp_power, sc); 378 if (sc->sc_powerhook == NULL) 379 printf("%s: WARNING: unable to establish power hook\n", 380 sc->sc_dev.dv_xname); 381 382 /* The attach is successful. */ 383 sc->sc_flags |= FXPF_ATTACHED; 384 385 return; 386 387 /* 388 * Free any resources we've allocated during the failed attach 389 * attempt. Do this in reverse order and fall though. 390 */ 391 fail_5: 392 for (i = 0; i < FXP_NRFABUFS; i++) { 393 if (sc->sc_rxmaps[i] != NULL) 394 bus_dmamap_destroy(sc->sc_dmat, sc->sc_rxmaps[i]); 395 } 396 fail_4: 397 for (i = 0; i < FXP_NTXCB; i++) { 398 if (FXP_DSTX(sc, i)->txs_dmamap != NULL) 399 bus_dmamap_destroy(sc->sc_dmat, 400 FXP_DSTX(sc, i)->txs_dmamap); 401 } 402 bus_dmamap_unload(sc->sc_dmat, sc->sc_dmamap); 403 fail_3: 404 bus_dmamap_destroy(sc->sc_dmat, sc->sc_dmamap); 405 fail_2: 406 bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_control_data, 407 sizeof(struct fxp_control_data)); 408 fail_1: 409 bus_dmamem_free(sc->sc_dmat, &seg, rseg); 410 fail_0: 411 return; 412} 413 414void 415fxp_mii_initmedia(struct fxp_softc *sc) 416{ 417 418 sc->sc_flags |= FXPF_MII; 419 420 sc->sc_mii.mii_ifp = &sc->sc_ethercom.ec_if; 421 sc->sc_mii.mii_readreg = fxp_mdi_read; 422 sc->sc_mii.mii_writereg = fxp_mdi_write; 423 sc->sc_mii.mii_statchg = fxp_statchg; 424 ifmedia_init(&sc->sc_mii.mii_media, 0, fxp_mii_mediachange, 425 fxp_mii_mediastatus); 426 /* 427 * The i82557 wedges if all of its PHYs are isolated! 428 */ 429 mii_attach(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, 430 MII_OFFSET_ANY, MIIF_NOISOLATE); 431 if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) { 432 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); 433 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE); 434 } else 435 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); 436} 437 438void 439fxp_80c24_initmedia(struct fxp_softc *sc) 440{ 441 442 /* 443 * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter 444 * doesn't have a programming interface of any sort. The 445 * media is sensed automatically based on how the link partner 446 * is configured. This is, in essence, manual configuration. 447 */ 448 printf("%s: Seeq 80c24 AutoDUPLEX media interface present\n", 449 sc->sc_dev.dv_xname); 450 ifmedia_init(&sc->sc_mii.mii_media, 0, fxp_80c24_mediachange, 451 fxp_80c24_mediastatus); 452 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_MANUAL, 0, NULL); 453 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_MANUAL); 454} 455 456/* 457 * Device shutdown routine. Called at system shutdown after sync. The 458 * main purpose of this routine is to shut off receiver DMA so that 459 * kernel memory doesn't get clobbered during warmboot. 460 */ 461void 462fxp_shutdown(void *arg) 463{ 464 struct fxp_softc *sc = arg; 465 466 /* 467 * Since the system's going to halt shortly, don't bother 468 * freeing mbufs. 469 */ 470 fxp_stop(&sc->sc_ethercom.ec_if, 0); 471} 472/* 473 * Power handler routine. Called when the system is transitioning 474 * into/out of power save modes. As with fxp_shutdown, the main 475 * purpose of this routine is to shut off receiver DMA so it doesn't 476 * clobber kernel memory at the wrong time. 477 */ 478void 479fxp_power(int why, void *arg) 480{ 481 struct fxp_softc *sc = arg; 482 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 483 int s; 484 485 s = splnet(); 486 switch (why) { 487 case PWR_SUSPEND: 488 case PWR_STANDBY: 489 fxp_stop(ifp, 0); 490 break; 491 case PWR_RESUME: 492 if (ifp->if_flags & IFF_UP) 493 fxp_init(ifp); 494 break; 495 case PWR_SOFTSUSPEND: 496 case PWR_SOFTSTANDBY: 497 case PWR_SOFTRESUME: 498 break; 499 } 500 splx(s); 501} 502 503/* 504 * Initialize the interface media. 505 */ 506void 507fxp_get_info(struct fxp_softc *sc, u_int8_t *enaddr) 508{ 509 u_int16_t data, myea[ETHER_ADDR_LEN / 2]; 510 511 /* 512 * Reset to a stable state. 513 */ 514 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SELECTIVE_RESET); 515 DELAY(10); 516 517 sc->sc_eeprom_size = 0; 518 fxp_autosize_eeprom(sc); 519 if(sc->sc_eeprom_size == 0) { 520 printf("%s: failed to detect EEPROM size\n", sc->sc_dev.dv_xname); 521 sc->sc_eeprom_size = 6; /* XXX panic here? */ 522 } 523#ifdef DEBUG 524 printf("%s: detected %d word EEPROM\n", 525 sc->sc_dev.dv_xname, 526 1 << sc->sc_eeprom_size); 527#endif 528 529 /* 530 * Get info about the primary PHY 531 */ 532 fxp_read_eeprom(sc, &data, 6, 1); 533 sc->phy_primary_device = 534 (data & FXP_PHY_DEVICE_MASK) >> FXP_PHY_DEVICE_SHIFT; 535 536 /* 537 * Read MAC address. 538 */ 539 fxp_read_eeprom(sc, myea, 0, 3); 540 enaddr[0] = myea[0] & 0xff; 541 enaddr[1] = myea[0] >> 8; 542 enaddr[2] = myea[1] & 0xff; 543 enaddr[3] = myea[1] >> 8; 544 enaddr[4] = myea[2] & 0xff; 545 enaddr[5] = myea[2] >> 8; 546} 547 548/* 549 * Figure out EEPROM size. 550 * 551 * 559's can have either 64-word or 256-word EEPROMs, the 558 552 * datasheet only talks about 64-word EEPROMs, and the 557 datasheet 553 * talks about the existance of 16 to 256 word EEPROMs. 554 * 555 * The only known sizes are 64 and 256, where the 256 version is used 556 * by CardBus cards to store CIS information. 557 * 558 * The address is shifted in msb-to-lsb, and after the last 559 * address-bit the EEPROM is supposed to output a `dummy zero' bit, 560 * after which follows the actual data. We try to detect this zero, by 561 * probing the data-out bit in the EEPROM control register just after 562 * having shifted in a bit. If the bit is zero, we assume we've 563 * shifted enough address bits. The data-out should be tri-state, 564 * before this, which should translate to a logical one. 565 * 566 * Other ways to do this would be to try to read a register with known 567 * contents with a varying number of address bits, but no such 568 * register seem to be available. The high bits of register 10 are 01 569 * on the 558 and 559, but apparently not on the 557. 570 * 571 * The Linux driver computes a checksum on the EEPROM data, but the 572 * value of this checksum is not very well documented. 573 */ 574 575void 576fxp_autosize_eeprom(struct fxp_softc *sc) 577{ 578 u_int16_t reg; 579 int x; 580 581 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 582 /* 583 * Shift in read opcode. 584 */ 585 for (x = 3; x > 0; x--) { 586 if (FXP_EEPROM_OPC_READ & (1 << (x - 1))) { 587 reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI; 588 } else { 589 reg = FXP_EEPROM_EECS; 590 } 591 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 592 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 593 reg | FXP_EEPROM_EESK); 594 DELAY(4); 595 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 596 DELAY(4); 597 } 598 /* 599 * Shift in address, wait for the dummy zero following a correct 600 * address shift. 601 */ 602 for (x = 1; x <= 8; x++) { 603 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 604 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 605 FXP_EEPROM_EECS | FXP_EEPROM_EESK); 606 DELAY(4); 607 if((CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & 608 FXP_EEPROM_EEDO) == 0) 609 break; 610 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 611 DELAY(4); 612 } 613 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 614 DELAY(4); 615 if(x != 6 && x != 8) { 616#ifdef DEBUG 617 printf("%s: strange EEPROM size (%d)\n", 618 sc->sc_dev.dv_xname, 1 << x); 619#endif 620 } else 621 sc->sc_eeprom_size = x; 622} 623 624/* 625 * Read from the serial EEPROM. Basically, you manually shift in 626 * the read opcode (one bit at a time) and then shift in the address, 627 * and then you shift out the data (all of this one bit at a time). 628 * The word size is 16 bits, so you have to provide the address for 629 * every 16 bits of data. 630 */ 631void 632fxp_read_eeprom(struct fxp_softc *sc, u_int16_t *data, int offset, int words) 633{ 634 u_int16_t reg; 635 int i, x; 636 637 for (i = 0; i < words; i++) { 638 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 639 /* 640 * Shift in read opcode. 641 */ 642 for (x = 3; x > 0; x--) { 643 if (FXP_EEPROM_OPC_READ & (1 << (x - 1))) { 644 reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI; 645 } else { 646 reg = FXP_EEPROM_EECS; 647 } 648 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 649 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 650 reg | FXP_EEPROM_EESK); 651 DELAY(4); 652 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 653 DELAY(4); 654 } 655 /* 656 * Shift in address. 657 */ 658 for (x = sc->sc_eeprom_size; x > 0; x--) { 659 if ((i + offset) & (1 << (x - 1))) { 660 reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI; 661 } else { 662 reg = FXP_EEPROM_EECS; 663 } 664 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 665 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 666 reg | FXP_EEPROM_EESK); 667 DELAY(4); 668 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 669 DELAY(4); 670 } 671 reg = FXP_EEPROM_EECS; 672 data[i] = 0; 673 /* 674 * Shift out data. 675 */ 676 for (x = 16; x > 0; x--) { 677 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 678 reg | FXP_EEPROM_EESK); 679 DELAY(4); 680 if (CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & 681 FXP_EEPROM_EEDO) 682 data[i] |= (1 << (x - 1)); 683 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 684 DELAY(4); 685 } 686 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 687 DELAY(4); 688 } 689} 690 691/* 692 * Start packet transmission on the interface. 693 */ 694void 695fxp_start(struct ifnet *ifp) 696{ 697 struct fxp_softc *sc = ifp->if_softc; 698 struct mbuf *m0, *m; 699 struct fxp_txdesc *txd; 700 struct fxp_txsoft *txs; 701 bus_dmamap_t dmamap; 702 int error, lasttx, nexttx, opending, seg; 703 704 /* 705 * If we want a re-init, bail out now. 706 */ 707 if (sc->sc_flags & FXPF_WANTINIT) { 708 ifp->if_flags |= IFF_OACTIVE; 709 return; 710 } 711 712 if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING) 713 return; 714 715 /* 716 * Remember the previous txpending and the current lasttx. 717 */ 718 opending = sc->sc_txpending; 719 lasttx = sc->sc_txlast; 720 721 /* 722 * Loop through the send queue, setting up transmit descriptors 723 * until we drain the queue, or use up all available transmit 724 * descriptors. 725 */ 726 while (sc->sc_txpending < FXP_NTXCB) { 727 /* 728 * Grab a packet off the queue. 729 */ 730 IFQ_POLL(&ifp->if_snd, m0); 731 if (m0 == NULL) 732 break; 733 m = NULL; 734 735 /* 736 * Get the next available transmit descriptor. 737 */ 738 nexttx = FXP_NEXTTX(sc->sc_txlast); 739 txd = FXP_CDTX(sc, nexttx); 740 txs = FXP_DSTX(sc, nexttx); 741 dmamap = txs->txs_dmamap; 742 743 /* 744 * Load the DMA map. If this fails, the packet either 745 * didn't fit in the allotted number of frags, or we were 746 * short on resources. In this case, we'll copy and try 747 * again. 748 */ 749 if (bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0, 750 BUS_DMA_NOWAIT) != 0) { 751 MGETHDR(m, M_DONTWAIT, MT_DATA); 752 if (m == NULL) { 753 printf("%s: unable to allocate Tx mbuf\n", 754 sc->sc_dev.dv_xname); 755 break; 756 } 757 if (m0->m_pkthdr.len > MHLEN) { 758 MCLGET(m, M_DONTWAIT); 759 if ((m->m_flags & M_EXT) == 0) { 760 printf("%s: unable to allocate Tx " 761 "cluster\n", sc->sc_dev.dv_xname); 762 m_freem(m); 763 break; 764 } 765 } 766 m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, caddr_t)); 767 m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len; 768 error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, 769 m, BUS_DMA_NOWAIT); 770 if (error) { 771 printf("%s: unable to load Tx buffer, " 772 "error = %d\n", sc->sc_dev.dv_xname, error); 773 break; 774 } 775 } 776 777 IFQ_DEQUEUE(&ifp->if_snd, m0); 778 if (m != NULL) { 779 m_freem(m0); 780 m0 = m; 781 } 782 783 /* Initialize the fraglist. */ 784 for (seg = 0; seg < dmamap->dm_nsegs; seg++) { 785 txd->txd_tbd[seg].tb_addr = 786 htole32(dmamap->dm_segs[seg].ds_addr); 787 txd->txd_tbd[seg].tb_size = 788 htole32(dmamap->dm_segs[seg].ds_len); 789 } 790 791 /* Sync the DMA map. */ 792 bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, 793 BUS_DMASYNC_PREWRITE); 794 795 /* 796 * Store a pointer to the packet so we can free it later. 797 */ 798 txs->txs_mbuf = m0; 799 800 /* 801 * Initialize the transmit descriptor. 802 */ 803 /* BIG_ENDIAN: no need to swap to store 0 */ 804 txd->txd_txcb.cb_status = 0; 805 txd->txd_txcb.cb_command = 806 htole16(FXP_CB_COMMAND_XMIT | FXP_CB_COMMAND_SF); 807 txd->txd_txcb.tx_threshold = tx_threshold; 808 txd->txd_txcb.tbd_number = dmamap->dm_nsegs; 809 810 FXP_CDTXSYNC(sc, nexttx, 811 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 812 813 /* Advance the tx pointer. */ 814 sc->sc_txpending++; 815 sc->sc_txlast = nexttx; 816 817#if NBPFILTER > 0 818 /* 819 * Pass packet to bpf if there is a listener. 820 */ 821 if (ifp->if_bpf) 822 bpf_mtap(ifp->if_bpf, m0); 823#endif 824 } 825 826 if (sc->sc_txpending == FXP_NTXCB) { 827 /* No more slots; notify upper layer. */ 828 ifp->if_flags |= IFF_OACTIVE; 829 } 830 831 if (sc->sc_txpending != opending) { 832 /* 833 * We enqueued packets. If the transmitter was idle, 834 * reset the txdirty pointer. 835 */ 836 if (opending == 0) 837 sc->sc_txdirty = FXP_NEXTTX(lasttx); 838 839 /* 840 * Cause the chip to interrupt and suspend command 841 * processing once the last packet we've enqueued 842 * has been transmitted. 843 */ 844 FXP_CDTX(sc, sc->sc_txlast)->txd_txcb.cb_command |= 845 htole16(FXP_CB_COMMAND_I | FXP_CB_COMMAND_S); 846 FXP_CDTXSYNC(sc, sc->sc_txlast, 847 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 848 849 /* 850 * The entire packet chain is set up. Clear the suspend bit 851 * on the command prior to the first packet we set up. 852 */ 853 FXP_CDTXSYNC(sc, lasttx, 854 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 855 FXP_CDTX(sc, lasttx)->txd_txcb.cb_command &= 856 htole16(~FXP_CB_COMMAND_S); 857 FXP_CDTXSYNC(sc, lasttx, 858 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 859 860 /* 861 * Issue a Resume command in case the chip was suspended. 862 */ 863 fxp_scb_wait(sc); 864 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_RESUME); 865 866 /* Set a watchdog timer in case the chip flakes out. */ 867 ifp->if_timer = 5; 868 } 869} 870 871/* 872 * Process interface interrupts. 873 */ 874int 875fxp_intr(void *arg) 876{ 877 struct fxp_softc *sc = arg; 878 struct ethercom *ec = &sc->sc_ethercom; 879 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 880 struct fxp_txdesc *txd; 881 struct fxp_txsoft *txs; 882 struct mbuf *m, *m0; 883 bus_dmamap_t rxmap; 884 struct fxp_rfa *rfa; 885 int i, claimed = 0; 886 u_int16_t len, rxstat, txstat; 887 u_int8_t statack; 888 889 if ((sc->sc_dev.dv_flags & DVF_ACTIVE) == 0) 890 return (0); 891 /* 892 * If the interface isn't running, don't try to 893 * service the interrupt.. just ack it and bail. 894 */ 895 if ((ifp->if_flags & IFF_RUNNING) == 0) { 896 statack = CSR_READ_1(sc, FXP_CSR_SCB_STATACK); 897 if (statack) { 898 claimed = 1; 899 CSR_WRITE_1(sc, FXP_CSR_SCB_STATACK, statack); 900 } 901 return (claimed); 902 } 903 904 while ((statack = CSR_READ_1(sc, FXP_CSR_SCB_STATACK)) != 0) { 905 claimed = 1; 906 907 /* 908 * First ACK all the interrupts in this pass. 909 */ 910 CSR_WRITE_1(sc, FXP_CSR_SCB_STATACK, statack); 911 912 /* 913 * Process receiver interrupts. If a no-resource (RNR) 914 * condition exists, get whatever packets we can and 915 * re-start the receiver. 916 */ 917 if (statack & (FXP_SCB_STATACK_FR | FXP_SCB_STATACK_RNR)) { 918 rcvloop: 919 m = sc->sc_rxq.ifq_head; 920 rfa = FXP_MTORFA(m); 921 rxmap = M_GETCTX(m, bus_dmamap_t); 922 923 FXP_RFASYNC(sc, m, 924 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 925 926 rxstat = le16toh(rfa->rfa_status); 927 928 if ((rxstat & FXP_RFA_STATUS_C) == 0) { 929 /* 930 * We have processed all of the 931 * receive buffers. 932 */ 933 FXP_RFASYNC(sc, m, BUS_DMASYNC_PREREAD); 934 goto do_transmit; 935 } 936 937 IF_DEQUEUE(&sc->sc_rxq, m); 938 939 FXP_RXBUFSYNC(sc, m, BUS_DMASYNC_POSTREAD); 940 941 len = le16toh(rfa->actual_size) & 942 (m->m_ext.ext_size - 1); 943 944 if (len < sizeof(struct ether_header)) { 945 /* 946 * Runt packet; drop it now. 947 */ 948 FXP_INIT_RFABUF(sc, m); 949 goto rcvloop; 950 } 951 952 /* 953 * If support for 802.1Q VLAN sized frames is 954 * enabled, we need to do some additional error 955 * checking (as we are saving bad frames, in 956 * order to receive the larger ones). 957 */ 958 if ((ec->ec_capenable & ETHERCAP_VLAN_MTU) != 0 && 959 (rxstat & (FXP_RFA_STATUS_OVERRUN| 960 FXP_RFA_STATUS_RNR| 961 FXP_RFA_STATUS_ALIGN| 962 FXP_RFA_STATUS_CRC)) != 0) { 963 FXP_INIT_RFABUF(sc, m); 964 goto rcvloop; 965 } 966 967 /* 968 * If the packet is small enough to fit in a 969 * single header mbuf, allocate one and copy 970 * the data into it. This greatly reduces 971 * memory consumption when we receive lots 972 * of small packets. 973 * 974 * Otherwise, we add a new buffer to the receive 975 * chain. If this fails, we drop the packet and 976 * recycle the old buffer. 977 */ 978 if (fxp_copy_small != 0 && len <= MHLEN) { 979 MGETHDR(m0, M_DONTWAIT, MT_DATA); 980 if (m == NULL) 981 goto dropit; 982 memcpy(mtod(m0, caddr_t), 983 mtod(m, caddr_t), len); 984 FXP_INIT_RFABUF(sc, m); 985 m = m0; 986 } else { 987 if (fxp_add_rfabuf(sc, rxmap, 1) != 0) { 988 dropit: 989 ifp->if_ierrors++; 990 FXP_INIT_RFABUF(sc, m); 991 goto rcvloop; 992 } 993 } 994 995 m->m_pkthdr.rcvif = ifp; 996 m->m_pkthdr.len = m->m_len = len; 997 998#if NBPFILTER > 0 999 /* 1000 * Pass this up to any BPF listeners, but only 1001 * pass it up the stack it its for us. 1002 */ 1003 if (ifp->if_bpf) 1004 bpf_mtap(ifp->if_bpf, m); 1005#endif 1006 1007 /* Pass it on. */ 1008 (*ifp->if_input)(ifp, m); 1009 goto rcvloop; 1010 } 1011 1012 do_transmit: 1013 if (statack & FXP_SCB_STATACK_RNR) { 1014 rxmap = M_GETCTX(sc->sc_rxq.ifq_head, bus_dmamap_t); 1015 fxp_scb_wait(sc); 1016 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 1017 rxmap->dm_segs[0].ds_addr + 1018 RFA_ALIGNMENT_FUDGE); 1019 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_START); 1020 } 1021 1022 /* 1023 * Free any finished transmit mbuf chains. 1024 */ 1025 if (statack & (FXP_SCB_STATACK_CXTNO|FXP_SCB_STATACK_CNA)) { 1026 ifp->if_flags &= ~IFF_OACTIVE; 1027 for (i = sc->sc_txdirty; sc->sc_txpending != 0; 1028 i = FXP_NEXTTX(i), sc->sc_txpending--) { 1029 txd = FXP_CDTX(sc, i); 1030 txs = FXP_DSTX(sc, i); 1031 1032 FXP_CDTXSYNC(sc, i, 1033 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1034 1035 txstat = le16toh(txd->txd_txcb.cb_status); 1036 1037 if ((txstat & FXP_CB_STATUS_C) == 0) 1038 break; 1039 1040 bus_dmamap_sync(sc->sc_dmat, txs->txs_dmamap, 1041 0, txs->txs_dmamap->dm_mapsize, 1042 BUS_DMASYNC_POSTWRITE); 1043 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 1044 m_freem(txs->txs_mbuf); 1045 txs->txs_mbuf = NULL; 1046 } 1047 1048 /* Update the dirty transmit buffer pointer. */ 1049 sc->sc_txdirty = i; 1050 1051 /* 1052 * Cancel the watchdog timer if there are no pending 1053 * transmissions. 1054 */ 1055 if (sc->sc_txpending == 0) { 1056 ifp->if_timer = 0; 1057 1058 /* 1059 * If we want a re-init, do that now. 1060 */ 1061 if (sc->sc_flags & FXPF_WANTINIT) 1062 (void) fxp_init(ifp); 1063 } 1064 1065 /* 1066 * Try to get more packets going. 1067 */ 1068 fxp_start(ifp); 1069 } 1070 } 1071 1072#if NRND > 0 1073 if (claimed) 1074 rnd_add_uint32(&sc->rnd_source, statack); 1075#endif 1076 return (claimed); 1077} 1078 1079/* 1080 * Update packet in/out/collision statistics. The i82557 doesn't 1081 * allow you to access these counters without doing a fairly 1082 * expensive DMA to get _all_ of the statistics it maintains, so 1083 * we do this operation here only once per second. The statistics 1084 * counters in the kernel are updated from the previous dump-stats 1085 * DMA and then a new dump-stats DMA is started. The on-chip 1086 * counters are zeroed when the DMA completes. If we can't start 1087 * the DMA immediately, we don't wait - we just prepare to read 1088 * them again next time. 1089 */ 1090void 1091fxp_tick(void *arg) 1092{ 1093 struct fxp_softc *sc = arg; 1094 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1095 struct fxp_stats *sp = &sc->sc_control_data->fcd_stats; 1096 int s; 1097 1098 if ((sc->sc_dev.dv_flags & DVF_ACTIVE) == 0) 1099 return; 1100 1101 s = splnet(); 1102 1103 FXP_CDSTATSSYNC(sc, BUS_DMASYNC_POSTREAD); 1104 1105 ifp->if_opackets += le32toh(sp->tx_good); 1106 ifp->if_collisions += le32toh(sp->tx_total_collisions); 1107 if (sp->rx_good) { 1108 ifp->if_ipackets += le32toh(sp->rx_good); 1109 sc->sc_rxidle = 0; 1110 } else { 1111 sc->sc_rxidle++; 1112 } 1113 ifp->if_ierrors += 1114 le32toh(sp->rx_crc_errors) + 1115 le32toh(sp->rx_alignment_errors) + 1116 le32toh(sp->rx_rnr_errors) + 1117 le32toh(sp->rx_overrun_errors); 1118 /* 1119 * If any transmit underruns occured, bump up the transmit 1120 * threshold by another 512 bytes (64 * 8). 1121 */ 1122 if (sp->tx_underruns) { 1123 ifp->if_oerrors += le32toh(sp->tx_underruns); 1124 if (tx_threshold < 192) 1125 tx_threshold += 64; 1126 } 1127 1128 /* 1129 * If we haven't received any packets in FXP_MAC_RX_IDLE seconds, 1130 * then assume the receiver has locked up and attempt to clear 1131 * the condition by reprogramming the multicast filter (actually, 1132 * resetting the interface). This is a work-around for a bug in 1133 * the 82557 where the receiver locks up if it gets certain types 1134 * of garbage in the syncronization bits prior to the packet header. 1135 * This bug is supposed to only occur in 10Mbps mode, but has been 1136 * seen to occur in 100Mbps mode as well (perhaps due to a 10/100 1137 * speed transition). 1138 */ 1139 if (sc->sc_rxidle > FXP_MAX_RX_IDLE) { 1140 (void) fxp_init(ifp); 1141 splx(s); 1142 return; 1143 } 1144 /* 1145 * If there is no pending command, start another stats 1146 * dump. Otherwise punt for now. 1147 */ 1148 if (CSR_READ_1(sc, FXP_CSR_SCB_COMMAND) == 0) { 1149 /* 1150 * Start another stats dump. 1151 */ 1152 FXP_CDSTATSSYNC(sc, BUS_DMASYNC_PREREAD); 1153 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_DUMPRESET); 1154 } else { 1155 /* 1156 * A previous command is still waiting to be accepted. 1157 * Just zero our copy of the stats and wait for the 1158 * next timer event to update them. 1159 */ 1160 /* BIG_ENDIAN: no swap required to store 0 */ 1161 sp->tx_good = 0; 1162 sp->tx_underruns = 0; 1163 sp->tx_total_collisions = 0; 1164 1165 sp->rx_good = 0; 1166 sp->rx_crc_errors = 0; 1167 sp->rx_alignment_errors = 0; 1168 sp->rx_rnr_errors = 0; 1169 sp->rx_overrun_errors = 0; 1170 } 1171 1172 if (sc->sc_flags & FXPF_MII) { 1173 /* Tick the MII clock. */ 1174 mii_tick(&sc->sc_mii); 1175 } 1176 1177 splx(s); 1178 1179 /* 1180 * Schedule another timeout one second from now. 1181 */ 1182 callout_reset(&sc->sc_callout, hz, fxp_tick, sc); 1183} 1184 1185/* 1186 * Drain the receive queue. 1187 */ 1188void 1189fxp_rxdrain(struct fxp_softc *sc) 1190{ 1191 bus_dmamap_t rxmap; 1192 struct mbuf *m; 1193 1194 for (;;) { 1195 IF_DEQUEUE(&sc->sc_rxq, m); 1196 if (m == NULL) 1197 break; 1198 rxmap = M_GETCTX(m, bus_dmamap_t); 1199 bus_dmamap_unload(sc->sc_dmat, rxmap); 1200 FXP_RXMAP_PUT(sc, rxmap); 1201 m_freem(m); 1202 } 1203} 1204 1205/* 1206 * Stop the interface. Cancels the statistics updater and resets 1207 * the interface. 1208 */ 1209void 1210fxp_stop(struct ifnet *ifp, int disable) 1211{ 1212 struct fxp_softc *sc = ifp->if_softc; 1213 struct fxp_txsoft *txs; 1214 int i; 1215 1216 /* 1217 * Turn down interface (done early to avoid bad interactions 1218 * between panics, shutdown hooks, and the watchdog timer) 1219 */ 1220 ifp->if_timer = 0; 1221 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1222 1223 /* 1224 * Cancel stats updater. 1225 */ 1226 callout_stop(&sc->sc_callout); 1227 if (sc->sc_flags & FXPF_MII) { 1228 /* Down the MII. */ 1229 mii_down(&sc->sc_mii); 1230 } 1231 1232 /* 1233 * Issue software reset 1234 */ 1235 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SELECTIVE_RESET); 1236 DELAY(10); 1237 1238 /* 1239 * Release any xmit buffers. 1240 */ 1241 for (i = 0; i < FXP_NTXCB; i++) { 1242 txs = FXP_DSTX(sc, i); 1243 if (txs->txs_mbuf != NULL) { 1244 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 1245 m_freem(txs->txs_mbuf); 1246 txs->txs_mbuf = NULL; 1247 } 1248 } 1249 sc->sc_txpending = 0; 1250 1251 if (disable) { 1252 fxp_rxdrain(sc); 1253 fxp_disable(sc); 1254 } 1255 1256} 1257 1258/* 1259 * Watchdog/transmission transmit timeout handler. Called when a 1260 * transmission is started on the interface, but no interrupt is 1261 * received before the timeout. This usually indicates that the 1262 * card has wedged for some reason. 1263 */ 1264void 1265fxp_watchdog(struct ifnet *ifp) 1266{ 1267 struct fxp_softc *sc = ifp->if_softc; 1268 1269 printf("%s: device timeout\n", sc->sc_dev.dv_xname); 1270 ifp->if_oerrors++; 1271 1272 (void) fxp_init(ifp); 1273} 1274 1275/* 1276 * Initialize the interface. Must be called at splnet(). 1277 */ 1278int 1279fxp_init(struct ifnet *ifp) 1280{ 1281 struct fxp_softc *sc = ifp->if_softc; 1282 struct fxp_cb_config *cbp; 1283 struct fxp_cb_ias *cb_ias; 1284 struct fxp_txdesc *txd; 1285 bus_dmamap_t rxmap; 1286 int i, prm, save_bf, allm, error = 0; 1287 1288 if ((error = fxp_enable(sc)) != 0) 1289 goto out; 1290 1291 /* 1292 * Cancel any pending I/O 1293 */ 1294 fxp_stop(ifp, 0); 1295 1296 /* 1297 * XXX just setting sc_flags to 0 here clears any FXPF_MII 1298 * flag, and this prevents the MII from detaching resulting in 1299 * a panic. The flags field should perhaps be split in runtime 1300 * flags and more static information. For now, just clear the 1301 * only other flag set. 1302 */ 1303 1304 sc->sc_flags &= ~FXPF_WANTINIT; 1305 1306 /* 1307 * Initialize base of CBL and RFA memory. Loading with zero 1308 * sets it up for regular linear addressing. 1309 */ 1310 fxp_scb_wait(sc); 1311 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 0); 1312 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_BASE); 1313 1314 fxp_scb_wait(sc); 1315 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_BASE); 1316 1317 /* 1318 * Initialize the multicast filter. Do this now, since we might 1319 * have to setup the config block differently. 1320 */ 1321 fxp_mc_setup(sc); 1322 1323 prm = (ifp->if_flags & IFF_PROMISC) ? 1 : 0; 1324 allm = (ifp->if_flags & IFF_ALLMULTI) ? 1 : 0; 1325 1326 /* 1327 * In order to support receiving 802.1Q VLAN frames, we have to 1328 * enable "save bad frames", since they are 4 bytes larger than 1329 * the normal Ethernet maximum frame length. 1330 */ 1331 save_bf = (sc->sc_ethercom.ec_capenable & ETHERCAP_VLAN_MTU) ? 1 : 0; 1332 1333 /* 1334 * Initialize base of dump-stats buffer. 1335 */ 1336 fxp_scb_wait(sc); 1337 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 1338 sc->sc_cddma + FXP_CDSTATSOFF); 1339 FXP_CDSTATSSYNC(sc, BUS_DMASYNC_PREREAD); 1340 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_DUMP_ADR); 1341 1342 cbp = &sc->sc_control_data->fcd_configcb; 1343 memset(cbp, 0, sizeof(struct fxp_cb_config)); 1344 1345 /* 1346 * This copy is kind of disgusting, but there are a bunch of must be 1347 * zero and must be one bits in this structure and this is the easiest 1348 * way to initialize them all to proper values. 1349 */ 1350 memcpy(cbp, fxp_cb_config_template, sizeof(fxp_cb_config_template)); 1351 1352 /* BIG_ENDIAN: no need to swap to store 0 */ 1353 cbp->cb_status = 0; 1354 cbp->cb_command = htole16(FXP_CB_COMMAND_CONFIG | 1355 FXP_CB_COMMAND_EL); 1356 /* BIG_ENDIAN: no need to swap to store 0xffffffff */ 1357 cbp->link_addr = 0xffffffff; /* (no) next command */ 1358 cbp->byte_count = 22; /* (22) bytes to config */ 1359 cbp->rx_fifo_limit = 8; /* rx fifo threshold (32 bytes) */ 1360 cbp->tx_fifo_limit = 0; /* tx fifo threshold (0 bytes) */ 1361 cbp->adaptive_ifs = 0; /* (no) adaptive interframe spacing */ 1362 cbp->rx_dma_bytecount = 0; /* (no) rx DMA max */ 1363 cbp->tx_dma_bytecount = 0; /* (no) tx DMA max */ 1364 cbp->dma_bce = 0; /* (disable) dma max counters */ 1365 cbp->late_scb = 0; /* (don't) defer SCB update */ 1366 cbp->tno_int = 0; /* (disable) tx not okay interrupt */ 1367 cbp->ci_int = 1; /* interrupt on CU idle */ 1368 cbp->save_bf = save_bf;/* save bad frames */ 1369 cbp->disc_short_rx = !prm; /* discard short packets */ 1370 cbp->underrun_retry = 1; /* retry mode (1) on DMA underrun */ 1371 /* interface mode */ 1372 cbp->mediatype = (sc->sc_flags & FXPF_MII) ? 1 : 0; 1373 cbp->nsai = 1; /* (don't) disable source addr insert */ 1374 cbp->preamble_length = 2; /* (7 byte) preamble */ 1375 cbp->loopback = 0; /* (don't) loopback */ 1376 cbp->linear_priority = 0; /* (normal CSMA/CD operation) */ 1377 cbp->linear_pri_mode = 0; /* (wait after xmit only) */ 1378 cbp->interfrm_spacing = 6; /* (96 bits of) interframe spacing */ 1379 cbp->promiscuous = prm; /* promiscuous mode */ 1380 cbp->bcast_disable = 0; /* (don't) disable broadcasts */ 1381 cbp->crscdt = 0; /* (CRS only) */ 1382 cbp->stripping = !prm; /* truncate rx packet to byte count */ 1383 cbp->padding = 1; /* (do) pad short tx packets */ 1384 cbp->rcv_crc_xfer = 0; /* (don't) xfer CRC to host */ 1385 cbp->force_fdx = 0; /* (don't) force full duplex */ 1386 cbp->fdx_pin_en = 1; /* (enable) FDX# pin */ 1387 cbp->multi_ia = 0; /* (don't) accept multiple IAs */ 1388 cbp->mc_all = allm; /* accept all multicasts */ 1389 1390 FXP_CDCONFIGSYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1391 1392 /* 1393 * Start the config command/DMA. 1394 */ 1395 fxp_scb_wait(sc); 1396 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDCONFIGOFF); 1397 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1398 /* ...and wait for it to complete. */ 1399 i = 1000; 1400 do { 1401 FXP_CDCONFIGSYNC(sc, 1402 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1403 DELAY(1); 1404 } while ((le16toh(cbp->cb_status) & FXP_CB_STATUS_C) == 0 && --i); 1405 if (i == 0) { 1406 printf("%s at line %d: dmasync timeout\n", 1407 sc->sc_dev.dv_xname, __LINE__); 1408 return ETIMEDOUT; 1409 } 1410 1411 /* 1412 * Initialize the station address. 1413 */ 1414 cb_ias = &sc->sc_control_data->fcd_iascb; 1415 /* BIG_ENDIAN: no need to swap to store 0 */ 1416 cb_ias->cb_status = 0; 1417 cb_ias->cb_command = htole16(FXP_CB_COMMAND_IAS | FXP_CB_COMMAND_EL); 1418 /* BIG_ENDIAN: no need to swap to store 0xffffffff */ 1419 cb_ias->link_addr = 0xffffffff; 1420 memcpy((void *)cb_ias->macaddr, LLADDR(ifp->if_sadl), ETHER_ADDR_LEN); 1421 1422 FXP_CDIASSYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1423 1424 /* 1425 * Start the IAS (Individual Address Setup) command/DMA. 1426 */ 1427 fxp_scb_wait(sc); 1428 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDIASOFF); 1429 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1430 /* ...and wait for it to complete. */ 1431 i = 1000; 1432 do { 1433 FXP_CDIASSYNC(sc, 1434 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1435 DELAY(1); 1436 } while ((le16toh(cb_ias->cb_status) & FXP_CB_STATUS_C) == 0 && --i); 1437 if (i == 0) { 1438 printf("%s at line %d: dmasync timeout\n", 1439 sc->sc_dev.dv_xname, __LINE__); 1440 return ETIMEDOUT; 1441 } 1442 1443 /* 1444 * Initialize the transmit descriptor ring. txlast is initialized 1445 * to the end of the list so that it will wrap around to the first 1446 * descriptor when the first packet is transmitted. 1447 */ 1448 for (i = 0; i < FXP_NTXCB; i++) { 1449 txd = FXP_CDTX(sc, i); 1450 memset(txd, 0, sizeof(*txd)); 1451 txd->txd_txcb.cb_command = 1452 htole16(FXP_CB_COMMAND_NOP | FXP_CB_COMMAND_S); 1453 txd->txd_txcb.tbd_array_addr = htole32(FXP_CDTBDADDR(sc, i)); 1454 txd->txd_txcb.link_addr = 1455 htole32(FXP_CDTXADDR(sc, FXP_NEXTTX(i))); 1456 FXP_CDTXSYNC(sc, i, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1457 } 1458 sc->sc_txpending = 0; 1459 sc->sc_txdirty = 0; 1460 sc->sc_txlast = FXP_NTXCB - 1; 1461 1462 /* 1463 * Initialize the receive buffer list. 1464 */ 1465 sc->sc_rxq.ifq_maxlen = FXP_NRFABUFS; 1466 while (sc->sc_rxq.ifq_len < FXP_NRFABUFS) { 1467 rxmap = FXP_RXMAP_GET(sc); 1468 if ((error = fxp_add_rfabuf(sc, rxmap, 0)) != 0) { 1469 printf("%s: unable to allocate or map rx " 1470 "buffer %d, error = %d\n", 1471 sc->sc_dev.dv_xname, 1472 sc->sc_rxq.ifq_len, error); 1473 /* 1474 * XXX Should attempt to run with fewer receive 1475 * XXX buffers instead of just failing. 1476 */ 1477 FXP_RXMAP_PUT(sc, rxmap); 1478 fxp_rxdrain(sc); 1479 goto out; 1480 } 1481 } 1482 sc->sc_rxidle = 0; 1483 1484 /* 1485 * Give the transmit ring to the chip. We do this by pointing 1486 * the chip at the last descriptor (which is a NOP|SUSPEND), and 1487 * issuing a start command. It will execute the NOP and then 1488 * suspend, pointing at the first descriptor. 1489 */ 1490 fxp_scb_wait(sc); 1491 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, FXP_CDTXADDR(sc, sc->sc_txlast)); 1492 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1493 1494 /* 1495 * Initialize receiver buffer area - RFA. 1496 */ 1497 rxmap = M_GETCTX(sc->sc_rxq.ifq_head, bus_dmamap_t); 1498 fxp_scb_wait(sc); 1499 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 1500 rxmap->dm_segs[0].ds_addr + RFA_ALIGNMENT_FUDGE); 1501 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_START); 1502 1503 if (sc->sc_flags & FXPF_MII) { 1504 /* 1505 * Set current media. 1506 */ 1507 mii_mediachg(&sc->sc_mii); 1508 } 1509 1510 /* 1511 * ...all done! 1512 */ 1513 ifp->if_flags |= IFF_RUNNING; 1514 ifp->if_flags &= ~IFF_OACTIVE; 1515 1516 /* 1517 * Start the one second timer. 1518 */ 1519 callout_reset(&sc->sc_callout, hz, fxp_tick, sc); 1520 1521 /* 1522 * Attempt to start output on the interface. 1523 */ 1524 fxp_start(ifp); 1525 1526 out: 1527 if (error) { 1528 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1529 ifp->if_timer = 0; 1530 printf("%s: interface not running\n", sc->sc_dev.dv_xname); 1531 } 1532 return (error); 1533} 1534 1535/* 1536 * Change media according to request. 1537 */ 1538int 1539fxp_mii_mediachange(struct ifnet *ifp) 1540{ 1541 struct fxp_softc *sc = ifp->if_softc; 1542 1543 if (ifp->if_flags & IFF_UP) 1544 mii_mediachg(&sc->sc_mii); 1545 return (0); 1546} 1547 1548/* 1549 * Notify the world which media we're using. 1550 */ 1551void 1552fxp_mii_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) 1553{ 1554 struct fxp_softc *sc = ifp->if_softc; 1555 1556 if(sc->sc_enabled == 0) { 1557 ifmr->ifm_active = IFM_ETHER | IFM_NONE; 1558 ifmr->ifm_status = 0; 1559 return; 1560 } 1561 1562 mii_pollstat(&sc->sc_mii); 1563 ifmr->ifm_status = sc->sc_mii.mii_media_status; 1564 ifmr->ifm_active = sc->sc_mii.mii_media_active; 1565} 1566 1567int 1568fxp_80c24_mediachange(struct ifnet *ifp) 1569{ 1570 1571 /* Nothing to do here. */ 1572 return (0); 1573} 1574 1575void 1576fxp_80c24_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) 1577{ 1578 struct fxp_softc *sc = ifp->if_softc; 1579 1580 /* 1581 * Media is currently-selected media. We cannot determine 1582 * the link status. 1583 */ 1584 ifmr->ifm_status = 0; 1585 ifmr->ifm_active = sc->sc_mii.mii_media.ifm_cur->ifm_media; 1586} 1587 1588/* 1589 * Add a buffer to the end of the RFA buffer list. 1590 * Return 0 if successful, error code on failure. 1591 * 1592 * The RFA struct is stuck at the beginning of mbuf cluster and the 1593 * data pointer is fixed up to point just past it. 1594 */ 1595int 1596fxp_add_rfabuf(struct fxp_softc *sc, bus_dmamap_t rxmap, int unload) 1597{ 1598 struct mbuf *m; 1599 int error; 1600 1601 MGETHDR(m, M_DONTWAIT, MT_DATA); 1602 if (m == NULL) 1603 return (ENOBUFS); 1604 1605 MCLGET(m, M_DONTWAIT); 1606 if ((m->m_flags & M_EXT) == 0) { 1607 m_freem(m); 1608 return (ENOBUFS); 1609 } 1610 1611 if (unload) 1612 bus_dmamap_unload(sc->sc_dmat, rxmap); 1613 1614 M_SETCTX(m, rxmap); 1615 1616 error = bus_dmamap_load(sc->sc_dmat, rxmap, 1617 m->m_ext.ext_buf, m->m_ext.ext_size, NULL, BUS_DMA_NOWAIT); 1618 if (error) { 1619 printf("%s: can't load rx DMA map %d, error = %d\n", 1620 sc->sc_dev.dv_xname, sc->sc_rxq.ifq_len, error); 1621 panic("fxp_add_rfabuf"); /* XXX */ 1622 } 1623 1624 FXP_INIT_RFABUF(sc, m); 1625 1626 return (0); 1627} 1628 1629int 1630fxp_mdi_read(struct device *self, int phy, int reg) 1631{ 1632 struct fxp_softc *sc = (struct fxp_softc *)self; 1633 int count = 10000; 1634 int value; 1635 1636 CSR_WRITE_4(sc, FXP_CSR_MDICONTROL, 1637 (FXP_MDI_READ << 26) | (reg << 16) | (phy << 21)); 1638 1639 while (((value = CSR_READ_4(sc, FXP_CSR_MDICONTROL)) & 0x10000000) == 0 1640 && count--) 1641 DELAY(10); 1642 1643 if (count <= 0) 1644 printf("%s: fxp_mdi_read: timed out\n", sc->sc_dev.dv_xname); 1645 1646 return (value & 0xffff); 1647} 1648 1649void 1650fxp_statchg(struct device *self) 1651{ 1652 struct fxp_softc *sc = (void *) self; 1653 1654 /* 1655 * Determine whether or not we have to work-around the 1656 * Resume Bug. 1657 */ 1658 if (sc->sc_flags & FXPF_HAS_RESUME_BUG) { 1659 if (IFM_TYPE(sc->sc_mii.mii_media_active) == IFM_10_T) 1660 sc->sc_flags |= FXPF_FIX_RESUME_BUG; 1661 else 1662 sc->sc_flags &= ~FXPF_FIX_RESUME_BUG; 1663 } 1664} 1665 1666void 1667fxp_mdi_write(struct device *self, int phy, int reg, int value) 1668{ 1669 struct fxp_softc *sc = (struct fxp_softc *)self; 1670 int count = 10000; 1671 1672 CSR_WRITE_4(sc, FXP_CSR_MDICONTROL, 1673 (FXP_MDI_WRITE << 26) | (reg << 16) | (phy << 21) | 1674 (value & 0xffff)); 1675 1676 while((CSR_READ_4(sc, FXP_CSR_MDICONTROL) & 0x10000000) == 0 && 1677 count--) 1678 DELAY(10); 1679 1680 if (count <= 0) 1681 printf("%s: fxp_mdi_write: timed out\n", sc->sc_dev.dv_xname); 1682} 1683 1684int 1685fxp_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) 1686{ 1687 struct fxp_softc *sc = ifp->if_softc; 1688 struct ifreq *ifr = (struct ifreq *)data; 1689 int s, error; 1690 1691 s = splnet(); 1692 1693 switch (cmd) { 1694 case SIOCSIFMEDIA: 1695 case SIOCGIFMEDIA: 1696 error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd); 1697 break; 1698 1699 default: 1700 error = ether_ioctl(ifp, cmd, data); 1701 if (error == ENETRESET) { 1702 if (sc->sc_enabled) { 1703 /* 1704 * Multicast list has changed; set the 1705 * hardware filter accordingly. 1706 */ 1707 if (sc->sc_txpending) { 1708 sc->sc_flags |= FXPF_WANTINIT; 1709 error = 0; 1710 } else 1711 error = fxp_init(ifp); 1712 } else 1713 error = 0; 1714 } 1715 break; 1716 } 1717 1718 /* Try to get more packets going. */ 1719 if (sc->sc_enabled) 1720 fxp_start(ifp); 1721 1722 splx(s); 1723 return (error); 1724} 1725 1726/* 1727 * Program the multicast filter. 1728 * 1729 * This function must be called at splnet(). 1730 */ 1731void 1732fxp_mc_setup(struct fxp_softc *sc) 1733{ 1734 struct fxp_cb_mcs *mcsp = &sc->sc_control_data->fcd_mcscb; 1735 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1736 struct ethercom *ec = &sc->sc_ethercom; 1737 struct ether_multi *enm; 1738 struct ether_multistep step; 1739 int count, nmcasts; 1740 1741#ifdef DIAGNOSTIC 1742 if (sc->sc_txpending) 1743 panic("fxp_mc_setup: pending transmissions"); 1744#endif 1745 1746 ifp->if_flags &= ~IFF_ALLMULTI; 1747 1748 /* 1749 * Initialize multicast setup descriptor. 1750 */ 1751 nmcasts = 0; 1752 ETHER_FIRST_MULTI(step, ec, enm); 1753 while (enm != NULL) { 1754 /* 1755 * Check for too many multicast addresses or if we're 1756 * listening to a range. Either way, we simply have 1757 * to accept all multicasts. 1758 */ 1759 if (nmcasts >= MAXMCADDR || 1760 memcmp(enm->enm_addrlo, enm->enm_addrhi, 1761 ETHER_ADDR_LEN) != 0) { 1762 /* 1763 * Callers of this function must do the 1764 * right thing with this. If we're called 1765 * from outside fxp_init(), the caller must 1766 * detect if the state if IFF_ALLMULTI changes. 1767 * If it does, the caller must then call 1768 * fxp_init(), since allmulti is handled by 1769 * the config block. 1770 */ 1771 ifp->if_flags |= IFF_ALLMULTI; 1772 return; 1773 } 1774 memcpy((void *)&mcsp->mc_addr[nmcasts][0], enm->enm_addrlo, 1775 ETHER_ADDR_LEN); 1776 nmcasts++; 1777 ETHER_NEXT_MULTI(step, enm); 1778 } 1779 1780 /* BIG_ENDIAN: no need to swap to store 0 */ 1781 mcsp->cb_status = 0; 1782 mcsp->cb_command = htole16(FXP_CB_COMMAND_MCAS | FXP_CB_COMMAND_EL); 1783 mcsp->link_addr = htole32(FXP_CDTXADDR(sc, FXP_NEXTTX(sc->sc_txlast))); 1784 mcsp->mc_cnt = htole16(nmcasts * ETHER_ADDR_LEN); 1785 1786 FXP_CDMCSSYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1787 1788 /* 1789 * Wait until the command unit is not active. This should never 1790 * happen since nothing is queued, but make sure anyway. 1791 */ 1792 count = 100; 1793 while ((CSR_READ_1(sc, FXP_CSR_SCB_RUSCUS) >> 6) == 1794 FXP_SCB_CUS_ACTIVE && --count) 1795 DELAY(1); 1796 if (count == 0) { 1797 printf("%s at line %d: command queue timeout\n", 1798 sc->sc_dev.dv_xname, __LINE__); 1799 return; 1800 } 1801 1802 /* 1803 * Start the multicast setup command/DMA. 1804 */ 1805 fxp_scb_wait(sc); 1806 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDMCSOFF); 1807 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1808 1809 /* ...and wait for it to complete. */ 1810 count = 1000; 1811 do { 1812 FXP_CDMCSSYNC(sc, 1813 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1814 DELAY(1); 1815 } while ((le16toh(mcsp->cb_status) & FXP_CB_STATUS_C) == 0 && --count); 1816 if (count == 0) { 1817 printf("%s at line %d: dmasync timeout\n", 1818 sc->sc_dev.dv_xname, __LINE__); 1819 return; 1820 } 1821} 1822 1823int 1824fxp_enable(struct fxp_softc *sc) 1825{ 1826 1827 if (sc->sc_enabled == 0 && sc->sc_enable != NULL) { 1828 if ((*sc->sc_enable)(sc) != 0) { 1829 printf("%s: device enable failed\n", 1830 sc->sc_dev.dv_xname); 1831 return (EIO); 1832 } 1833 } 1834 1835 sc->sc_enabled = 1; 1836 return (0); 1837} 1838 1839void 1840fxp_disable(struct fxp_softc *sc) 1841{ 1842 1843 if (sc->sc_enabled != 0 && sc->sc_disable != NULL) { 1844 (*sc->sc_disable)(sc); 1845 sc->sc_enabled = 0; 1846 } 1847} 1848 1849/* 1850 * fxp_activate: 1851 * 1852 * Handle device activation/deactivation requests. 1853 */ 1854int 1855fxp_activate(struct device *self, enum devact act) 1856{ 1857 struct fxp_softc *sc = (void *) self; 1858 int s, error = 0; 1859 1860 s = splnet(); 1861 switch (act) { 1862 case DVACT_ACTIVATE: 1863 error = EOPNOTSUPP; 1864 break; 1865 1866 case DVACT_DEACTIVATE: 1867 if (sc->sc_flags & FXPF_MII) 1868 mii_activate(&sc->sc_mii, act, MII_PHY_ANY, 1869 MII_OFFSET_ANY); 1870 if_deactivate(&sc->sc_ethercom.ec_if); 1871 break; 1872 } 1873 splx(s); 1874 1875 return (error); 1876} 1877 1878/* 1879 * fxp_detach: 1880 * 1881 * Detach an i82557 interface. 1882 */ 1883int 1884fxp_detach(struct fxp_softc *sc) 1885{ 1886 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1887 int i; 1888 1889 /* Succeed now if there's no work to do. */ 1890 if ((sc->sc_flags & FXPF_ATTACHED) == 0) 1891 return (0); 1892 1893 /* Unhook our tick handler. */ 1894 callout_stop(&sc->sc_callout); 1895 1896 if (sc->sc_flags & FXPF_MII) { 1897 /* Detach all PHYs */ 1898 mii_detach(&sc->sc_mii, MII_PHY_ANY, MII_OFFSET_ANY); 1899 } 1900 1901 /* Delete all remaining media. */ 1902 ifmedia_delete_instance(&sc->sc_mii.mii_media, IFM_INST_ANY); 1903 1904#if NRND > 0 1905 rnd_detach_source(&sc->rnd_source); 1906#endif 1907 ether_ifdetach(ifp); 1908 if_detach(ifp); 1909 1910 for (i = 0; i < FXP_NRFABUFS; i++) { 1911 bus_dmamap_unload(sc->sc_dmat, sc->sc_rxmaps[i]); 1912 bus_dmamap_destroy(sc->sc_dmat, sc->sc_rxmaps[i]); 1913 } 1914 1915 for (i = 0; i < FXP_NTXCB; i++) { 1916 bus_dmamap_unload(sc->sc_dmat, FXP_DSTX(sc, i)->txs_dmamap); 1917 bus_dmamap_destroy(sc->sc_dmat, FXP_DSTX(sc, i)->txs_dmamap); 1918 } 1919 1920 bus_dmamap_unload(sc->sc_dmat, sc->sc_dmamap); 1921 bus_dmamap_destroy(sc->sc_dmat, sc->sc_dmamap); 1922 bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_control_data, 1923 sizeof(struct fxp_control_data)); 1924 bus_dmamem_free(sc->sc_dmat, &sc->sc_cdseg, sc->sc_cdnseg); 1925 1926 shutdownhook_disestablish(sc->sc_sdhook); 1927 powerhook_disestablish(sc->sc_powerhook); 1928 1929 return (0); 1930} 1931