i82557.c revision 1.142
1/* $NetBSD: i82557.c,v 1.142 2014/08/10 16:44:35 tls Exp $ */ 2 3/*- 4 * Copyright (c) 1997, 1998, 1999, 2001, 2002 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, 9 * NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33/* 34 * Copyright (c) 1995, David Greenman 35 * Copyright (c) 2001 Jonathan Lemon <jlemon@freebsd.org> 36 * All rights reserved. 37 * 38 * Redistribution and use in source and binary forms, with or without 39 * modification, are permitted provided that the following conditions 40 * are met: 41 * 1. Redistributions of source code must retain the above copyright 42 * notice unmodified, this list of conditions, and the following 43 * disclaimer. 44 * 2. Redistributions in binary form must reproduce the above copyright 45 * notice, this list of conditions and the following disclaimer in the 46 * documentation and/or other materials provided with the distribution. 47 * 48 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 49 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 50 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 51 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 52 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 53 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 54 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 55 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 56 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 57 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 58 * SUCH DAMAGE. 59 * 60 * Id: if_fxp.c,v 1.113 2001/05/17 23:50:24 jlemon 61 */ 62 63/* 64 * Device driver for the Intel i82557 fast Ethernet controller, 65 * and its successors, the i82558 and i82559. 66 */ 67 68#include <sys/cdefs.h> 69__KERNEL_RCSID(0, "$NetBSD: i82557.c,v 1.142 2014/08/10 16:44:35 tls Exp $"); 70 71#include <sys/param.h> 72#include <sys/systm.h> 73#include <sys/callout.h> 74#include <sys/mbuf.h> 75#include <sys/malloc.h> 76#include <sys/kernel.h> 77#include <sys/socket.h> 78#include <sys/ioctl.h> 79#include <sys/errno.h> 80#include <sys/device.h> 81#include <sys/syslog.h> 82#include <sys/proc.h> 83 84#include <machine/endian.h> 85 86#include <sys/rnd.h> 87 88#include <net/if.h> 89#include <net/if_dl.h> 90#include <net/if_media.h> 91#include <net/if_ether.h> 92 93#include <netinet/in.h> 94#include <netinet/in_systm.h> 95#include <netinet/ip.h> 96#include <netinet/tcp.h> 97#include <netinet/udp.h> 98 99#include <net/bpf.h> 100 101#include <sys/bus.h> 102#include <sys/intr.h> 103 104#include <dev/mii/miivar.h> 105 106#include <dev/ic/i82557reg.h> 107#include <dev/ic/i82557var.h> 108 109#include <dev/microcode/i8255x/rcvbundl.h> 110 111/* 112 * NOTE! On the Alpha, we have an alignment constraint. The 113 * card DMAs the packet immediately following the RFA. However, 114 * the first thing in the packet is a 14-byte Ethernet header. 115 * This means that the packet is misaligned. To compensate, 116 * we actually offset the RFA 2 bytes into the cluster. This 117 * alignes the packet after the Ethernet header at a 32-bit 118 * boundary. HOWEVER! This means that the RFA is misaligned! 119 */ 120#define RFA_ALIGNMENT_FUDGE 2 121 122/* 123 * The configuration byte map has several undefined fields which 124 * must be one or must be zero. Set up a template for these bits 125 * only (assuming an i82557 chip), leaving the actual configuration 126 * for fxp_init(). 127 * 128 * See the definition of struct fxp_cb_config for the bit definitions. 129 */ 130const uint8_t fxp_cb_config_template[] = { 131 0x0, 0x0, /* cb_status */ 132 0x0, 0x0, /* cb_command */ 133 0x0, 0x0, 0x0, 0x0, /* link_addr */ 134 0x0, /* 0 */ 135 0x0, /* 1 */ 136 0x0, /* 2 */ 137 0x0, /* 3 */ 138 0x0, /* 4 */ 139 0x0, /* 5 */ 140 0x32, /* 6 */ 141 0x0, /* 7 */ 142 0x0, /* 8 */ 143 0x0, /* 9 */ 144 0x6, /* 10 */ 145 0x0, /* 11 */ 146 0x0, /* 12 */ 147 0x0, /* 13 */ 148 0xf2, /* 14 */ 149 0x48, /* 15 */ 150 0x0, /* 16 */ 151 0x40, /* 17 */ 152 0xf0, /* 18 */ 153 0x0, /* 19 */ 154 0x3f, /* 20 */ 155 0x5, /* 21 */ 156 0x0, /* 22 */ 157 0x0, /* 23 */ 158 0x0, /* 24 */ 159 0x0, /* 25 */ 160 0x0, /* 26 */ 161 0x0, /* 27 */ 162 0x0, /* 28 */ 163 0x0, /* 29 */ 164 0x0, /* 30 */ 165 0x0, /* 31 */ 166}; 167 168void fxp_mii_initmedia(struct fxp_softc *); 169void fxp_mii_mediastatus(struct ifnet *, struct ifmediareq *); 170 171void fxp_80c24_initmedia(struct fxp_softc *); 172int fxp_80c24_mediachange(struct ifnet *); 173void fxp_80c24_mediastatus(struct ifnet *, struct ifmediareq *); 174 175void fxp_start(struct ifnet *); 176int fxp_ioctl(struct ifnet *, u_long, void *); 177void fxp_watchdog(struct ifnet *); 178int fxp_init(struct ifnet *); 179void fxp_stop(struct ifnet *, int); 180 181void fxp_txintr(struct fxp_softc *); 182int fxp_rxintr(struct fxp_softc *); 183 184void fxp_rx_hwcksum(struct fxp_softc *,struct mbuf *, 185 const struct fxp_rfa *, u_int); 186 187void fxp_rxdrain(struct fxp_softc *); 188int fxp_add_rfabuf(struct fxp_softc *, bus_dmamap_t, int); 189int fxp_mdi_read(device_t, int, int); 190void fxp_statchg(struct ifnet *); 191void fxp_mdi_write(device_t, int, int, int); 192void fxp_autosize_eeprom(struct fxp_softc*); 193void fxp_read_eeprom(struct fxp_softc *, uint16_t *, int, int); 194void fxp_write_eeprom(struct fxp_softc *, uint16_t *, int, int); 195void fxp_eeprom_update_cksum(struct fxp_softc *); 196void fxp_get_info(struct fxp_softc *, uint8_t *); 197void fxp_tick(void *); 198void fxp_mc_setup(struct fxp_softc *); 199void fxp_load_ucode(struct fxp_softc *); 200 201int fxp_copy_small = 0; 202 203/* 204 * Variables for interrupt mitigating microcode. 205 */ 206int fxp_int_delay = 1000; /* usec */ 207int fxp_bundle_max = 6; /* packets */ 208 209struct fxp_phytype { 210 int fp_phy; /* type of PHY, -1 for MII at the end. */ 211 void (*fp_init)(struct fxp_softc *); 212} fxp_phytype_table[] = { 213 { FXP_PHY_80C24, fxp_80c24_initmedia }, 214 { -1, fxp_mii_initmedia }, 215}; 216 217/* 218 * Set initial transmit threshold at 64 (512 bytes). This is 219 * increased by 64 (512 bytes) at a time, to maximum of 192 220 * (1536 bytes), if an underrun occurs. 221 */ 222static int tx_threshold = 64; 223 224/* 225 * Wait for the previous command to be accepted (but not necessarily 226 * completed). 227 */ 228static inline void 229fxp_scb_wait(struct fxp_softc *sc) 230{ 231 int i = 10000; 232 233 while (CSR_READ_1(sc, FXP_CSR_SCB_COMMAND) && --i) 234 delay(2); 235 if (i == 0) 236 log(LOG_WARNING, 237 "%s: WARNING: SCB timed out!\n", device_xname(sc->sc_dev)); 238} 239 240/* 241 * Submit a command to the i82557. 242 */ 243static inline void 244fxp_scb_cmd(struct fxp_softc *sc, uint8_t cmd) 245{ 246 247 CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, cmd); 248} 249 250/* 251 * Finish attaching an i82557 interface. Called by bus-specific front-end. 252 */ 253void 254fxp_attach(struct fxp_softc *sc) 255{ 256 uint8_t enaddr[ETHER_ADDR_LEN]; 257 struct ifnet *ifp; 258 bus_dma_segment_t seg; 259 int rseg, i, error; 260 struct fxp_phytype *fp; 261 262 callout_init(&sc->sc_callout, 0); 263 264 /* 265 * Enable use of extended RFDs and IPCBs for 82550 and later chips. 266 * Note: to use IPCB we need extended TXCB support too, and 267 * these feature flags should be set in each bus attachment. 268 */ 269 if (sc->sc_flags & FXPF_EXT_RFA) { 270 sc->sc_txcmd = htole16(FXP_CB_COMMAND_IPCBXMIT); 271 sc->sc_rfa_size = RFA_EXT_SIZE; 272 } else { 273 sc->sc_txcmd = htole16(FXP_CB_COMMAND_XMIT); 274 sc->sc_rfa_size = RFA_SIZE; 275 } 276 277 /* 278 * Allocate the control data structures, and create and load the 279 * DMA map for it. 280 */ 281 if ((error = bus_dmamem_alloc(sc->sc_dmat, 282 sizeof(struct fxp_control_data), PAGE_SIZE, 0, &seg, 1, &rseg, 283 0)) != 0) { 284 aprint_error_dev(sc->sc_dev, 285 "unable to allocate control data, error = %d\n", 286 error); 287 goto fail_0; 288 } 289 290 if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, 291 sizeof(struct fxp_control_data), (void **)&sc->sc_control_data, 292 BUS_DMA_COHERENT)) != 0) { 293 aprint_error_dev(sc->sc_dev, 294 "unable to map control data, error = %d\n", error); 295 goto fail_1; 296 } 297 sc->sc_cdseg = seg; 298 sc->sc_cdnseg = rseg; 299 300 memset(sc->sc_control_data, 0, sizeof(struct fxp_control_data)); 301 302 if ((error = bus_dmamap_create(sc->sc_dmat, 303 sizeof(struct fxp_control_data), 1, 304 sizeof(struct fxp_control_data), 0, 0, &sc->sc_dmamap)) != 0) { 305 aprint_error_dev(sc->sc_dev, 306 "unable to create control data DMA map, error = %d\n", 307 error); 308 goto fail_2; 309 } 310 311 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap, 312 sc->sc_control_data, sizeof(struct fxp_control_data), NULL, 313 0)) != 0) { 314 aprint_error_dev(sc->sc_dev, 315 "can't load control data DMA map, error = %d\n", 316 error); 317 goto fail_3; 318 } 319 320 /* 321 * Create the transmit buffer DMA maps. 322 */ 323 for (i = 0; i < FXP_NTXCB; i++) { 324 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 325 (sc->sc_flags & FXPF_EXT_RFA) ? 326 FXP_IPCB_NTXSEG : FXP_NTXSEG, 327 MCLBYTES, 0, 0, &FXP_DSTX(sc, i)->txs_dmamap)) != 0) { 328 aprint_error_dev(sc->sc_dev, 329 "unable to create tx DMA map %d, error = %d\n", 330 i, error); 331 goto fail_4; 332 } 333 } 334 335 /* 336 * Create the receive buffer DMA maps. 337 */ 338 for (i = 0; i < FXP_NRFABUFS; i++) { 339 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, 340 MCLBYTES, 0, 0, &sc->sc_rxmaps[i])) != 0) { 341 aprint_error_dev(sc->sc_dev, 342 "unable to create rx DMA map %d, error = %d\n", 343 i, error); 344 goto fail_5; 345 } 346 } 347 348 /* Initialize MAC address and media structures. */ 349 fxp_get_info(sc, enaddr); 350 351 aprint_normal_dev(sc->sc_dev, "Ethernet address %s\n", 352 ether_sprintf(enaddr)); 353 354 ifp = &sc->sc_ethercom.ec_if; 355 356 /* 357 * Get info about our media interface, and initialize it. Note 358 * the table terminates itself with a phy of -1, indicating 359 * that we're using MII. 360 */ 361 for (fp = fxp_phytype_table; fp->fp_phy != -1; fp++) 362 if (fp->fp_phy == sc->phy_primary_device) 363 break; 364 (*fp->fp_init)(sc); 365 366 strlcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ); 367 ifp->if_softc = sc; 368 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 369 ifp->if_ioctl = fxp_ioctl; 370 ifp->if_start = fxp_start; 371 ifp->if_watchdog = fxp_watchdog; 372 ifp->if_init = fxp_init; 373 ifp->if_stop = fxp_stop; 374 IFQ_SET_READY(&ifp->if_snd); 375 376 if (sc->sc_flags & FXPF_EXT_RFA) { 377 /* 378 * Enable hardware cksum support by EXT_RFA and IPCB. 379 * 380 * IFCAP_CSUM_IPv4_Tx seems to have a problem, 381 * at least, on i82550 rev.12. 382 * specifically, it doesn't set ipv4 checksum properly 383 * when sending UDP (and probably TCP) packets with 384 * 20 byte ipv4 header + 1 or 2 byte data, 385 * though ICMP packets seem working. 386 * FreeBSD driver has related comments. 387 * We've added a workaround to handle the bug by padding 388 * such packets manually. 389 */ 390 ifp->if_capabilities = 391 IFCAP_CSUM_IPv4_Tx | IFCAP_CSUM_IPv4_Rx | 392 IFCAP_CSUM_TCPv4_Tx | IFCAP_CSUM_TCPv4_Rx | 393 IFCAP_CSUM_UDPv4_Tx | IFCAP_CSUM_UDPv4_Rx; 394 sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_HWTAGGING; 395 } else if (sc->sc_flags & FXPF_82559_RXCSUM) { 396 ifp->if_capabilities = 397 IFCAP_CSUM_TCPv4_Rx | 398 IFCAP_CSUM_UDPv4_Rx; 399 } 400 401 /* 402 * We can support 802.1Q VLAN-sized frames. 403 */ 404 sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU; 405 406 /* 407 * Attach the interface. 408 */ 409 if_attach(ifp); 410 ether_ifattach(ifp, enaddr); 411 rnd_attach_source(&sc->rnd_source, device_xname(sc->sc_dev), 412 RND_TYPE_NET, RND_FLAG_DEFAULT); 413 414#ifdef FXP_EVENT_COUNTERS 415 evcnt_attach_dynamic(&sc->sc_ev_txstall, EVCNT_TYPE_MISC, 416 NULL, device_xname(sc->sc_dev), "txstall"); 417 evcnt_attach_dynamic(&sc->sc_ev_txintr, EVCNT_TYPE_INTR, 418 NULL, device_xname(sc->sc_dev), "txintr"); 419 evcnt_attach_dynamic(&sc->sc_ev_rxintr, EVCNT_TYPE_INTR, 420 NULL, device_xname(sc->sc_dev), "rxintr"); 421 if (sc->sc_flags & FXPF_FC) { 422 evcnt_attach_dynamic(&sc->sc_ev_txpause, EVCNT_TYPE_MISC, 423 NULL, device_xname(sc->sc_dev), "txpause"); 424 evcnt_attach_dynamic(&sc->sc_ev_rxpause, EVCNT_TYPE_MISC, 425 NULL, device_xname(sc->sc_dev), "rxpause"); 426 } 427#endif /* FXP_EVENT_COUNTERS */ 428 429 /* The attach is successful. */ 430 sc->sc_flags |= FXPF_ATTACHED; 431 432 return; 433 434 /* 435 * Free any resources we've allocated during the failed attach 436 * attempt. Do this in reverse order and fall though. 437 */ 438 fail_5: 439 for (i = 0; i < FXP_NRFABUFS; i++) { 440 if (sc->sc_rxmaps[i] != NULL) 441 bus_dmamap_destroy(sc->sc_dmat, sc->sc_rxmaps[i]); 442 } 443 fail_4: 444 for (i = 0; i < FXP_NTXCB; i++) { 445 if (FXP_DSTX(sc, i)->txs_dmamap != NULL) 446 bus_dmamap_destroy(sc->sc_dmat, 447 FXP_DSTX(sc, i)->txs_dmamap); 448 } 449 bus_dmamap_unload(sc->sc_dmat, sc->sc_dmamap); 450 fail_3: 451 bus_dmamap_destroy(sc->sc_dmat, sc->sc_dmamap); 452 fail_2: 453 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data, 454 sizeof(struct fxp_control_data)); 455 fail_1: 456 bus_dmamem_free(sc->sc_dmat, &seg, rseg); 457 fail_0: 458 return; 459} 460 461void 462fxp_mii_initmedia(struct fxp_softc *sc) 463{ 464 int flags; 465 466 sc->sc_flags |= FXPF_MII; 467 468 sc->sc_mii.mii_ifp = &sc->sc_ethercom.ec_if; 469 sc->sc_mii.mii_readreg = fxp_mdi_read; 470 sc->sc_mii.mii_writereg = fxp_mdi_write; 471 sc->sc_mii.mii_statchg = fxp_statchg; 472 473 sc->sc_ethercom.ec_mii = &sc->sc_mii; 474 ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, ether_mediachange, 475 fxp_mii_mediastatus); 476 477 flags = MIIF_NOISOLATE; 478 if (sc->sc_flags & FXPF_FC) 479 flags |= MIIF_FORCEANEG|MIIF_DOPAUSE; 480 /* 481 * The i82557 wedges if all of its PHYs are isolated! 482 */ 483 mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, 484 MII_OFFSET_ANY, flags); 485 if (LIST_EMPTY(&sc->sc_mii.mii_phys)) { 486 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); 487 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE); 488 } else 489 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); 490} 491 492void 493fxp_80c24_initmedia(struct fxp_softc *sc) 494{ 495 496 /* 497 * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter 498 * doesn't have a programming interface of any sort. The 499 * media is sensed automatically based on how the link partner 500 * is configured. This is, in essence, manual configuration. 501 */ 502 aprint_normal_dev(sc->sc_dev, 503 "Seeq 80c24 AutoDUPLEX media interface present\n"); 504 ifmedia_init(&sc->sc_mii.mii_media, 0, fxp_80c24_mediachange, 505 fxp_80c24_mediastatus); 506 ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_MANUAL, 0, NULL); 507 ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_MANUAL); 508} 509 510/* 511 * Initialize the interface media. 512 */ 513void 514fxp_get_info(struct fxp_softc *sc, uint8_t *enaddr) 515{ 516 uint16_t data, myea[ETHER_ADDR_LEN / 2]; 517 518 /* 519 * Reset to a stable state. 520 */ 521 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SELECTIVE_RESET); 522 DELAY(100); 523 524 sc->sc_eeprom_size = 0; 525 fxp_autosize_eeprom(sc); 526 if (sc->sc_eeprom_size == 0) { 527 aprint_error_dev(sc->sc_dev, "failed to detect EEPROM size\n"); 528 sc->sc_eeprom_size = 6; /* XXX panic here? */ 529 } 530#ifdef DEBUG 531 aprint_debug_dev(sc->sc_dev, "detected %d word EEPROM\n", 532 1 << sc->sc_eeprom_size); 533#endif 534 535 /* 536 * Get info about the primary PHY 537 */ 538 fxp_read_eeprom(sc, &data, 6, 1); 539 sc->phy_primary_device = 540 (data & FXP_PHY_DEVICE_MASK) >> FXP_PHY_DEVICE_SHIFT; 541 542 /* 543 * Read MAC address. 544 */ 545 fxp_read_eeprom(sc, myea, 0, 3); 546 enaddr[0] = myea[0] & 0xff; 547 enaddr[1] = myea[0] >> 8; 548 enaddr[2] = myea[1] & 0xff; 549 enaddr[3] = myea[1] >> 8; 550 enaddr[4] = myea[2] & 0xff; 551 enaddr[5] = myea[2] >> 8; 552 553 /* 554 * Systems based on the ICH2/ICH2-M chip from Intel, as well 555 * as some i82559 designs, have a defect where the chip can 556 * cause a PCI protocol violation if it receives a CU_RESUME 557 * command when it is entering the IDLE state. 558 * 559 * The work-around is to disable Dynamic Standby Mode, so that 560 * the chip never deasserts #CLKRUN, and always remains in the 561 * active state. 562 * 563 * Unfortunately, the only way to disable Dynamic Standby is 564 * to frob an EEPROM setting and reboot (the EEPROM setting 565 * is only consulted when the PCI bus comes out of reset). 566 * 567 * See Intel 82801BA/82801BAM Specification Update, Errata #30. 568 */ 569 if (sc->sc_flags & FXPF_HAS_RESUME_BUG) { 570 fxp_read_eeprom(sc, &data, 10, 1); 571 if (data & 0x02) { /* STB enable */ 572 aprint_error_dev(sc->sc_dev, "WARNING: " 573 "Disabling dynamic standby mode in EEPROM " 574 "to work around a\n"); 575 aprint_normal_dev(sc->sc_dev, 576 "WARNING: hardware bug. You must reset " 577 "the system before using this\n"); 578 aprint_normal_dev(sc->sc_dev, "WARNING: interface.\n"); 579 data &= ~0x02; 580 fxp_write_eeprom(sc, &data, 10, 1); 581 aprint_normal_dev(sc->sc_dev, "new EEPROM ID: 0x%04x\n", 582 data); 583 fxp_eeprom_update_cksum(sc); 584 } 585 } 586 587 /* Receiver lock-up workaround detection. (FXPF_RECV_WORKAROUND) */ 588 /* Due to false positives we make it conditional on setting link1 */ 589 fxp_read_eeprom(sc, &data, 3, 1); 590 if ((data & 0x03) != 0x03) { 591 aprint_verbose_dev(sc->sc_dev, 592 "May need receiver lock-up workaround\n"); 593 } 594} 595 596static void 597fxp_eeprom_shiftin(struct fxp_softc *sc, int data, int len) 598{ 599 uint16_t reg; 600 int x; 601 602 for (x = 1 << (len - 1); x != 0; x >>= 1) { 603 DELAY(40); 604 if (data & x) 605 reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI; 606 else 607 reg = FXP_EEPROM_EECS; 608 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 609 DELAY(40); 610 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 611 reg | FXP_EEPROM_EESK); 612 DELAY(40); 613 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 614 } 615 DELAY(40); 616} 617 618/* 619 * Figure out EEPROM size. 620 * 621 * 559's can have either 64-word or 256-word EEPROMs, the 558 622 * datasheet only talks about 64-word EEPROMs, and the 557 datasheet 623 * talks about the existence of 16 to 256 word EEPROMs. 624 * 625 * The only known sizes are 64 and 256, where the 256 version is used 626 * by CardBus cards to store CIS information. 627 * 628 * The address is shifted in msb-to-lsb, and after the last 629 * address-bit the EEPROM is supposed to output a `dummy zero' bit, 630 * after which follows the actual data. We try to detect this zero, by 631 * probing the data-out bit in the EEPROM control register just after 632 * having shifted in a bit. If the bit is zero, we assume we've 633 * shifted enough address bits. The data-out should be tri-state, 634 * before this, which should translate to a logical one. 635 * 636 * Other ways to do this would be to try to read a register with known 637 * contents with a varying number of address bits, but no such 638 * register seem to be available. The high bits of register 10 are 01 639 * on the 558 and 559, but apparently not on the 557. 640 * 641 * The Linux driver computes a checksum on the EEPROM data, but the 642 * value of this checksum is not very well documented. 643 */ 644 645void 646fxp_autosize_eeprom(struct fxp_softc *sc) 647{ 648 int x; 649 650 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 651 DELAY(40); 652 653 /* Shift in read opcode. */ 654 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_READ, 3); 655 656 /* 657 * Shift in address, wait for the dummy zero following a correct 658 * address shift. 659 */ 660 for (x = 1; x <= 8; x++) { 661 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 662 DELAY(40); 663 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 664 FXP_EEPROM_EECS | FXP_EEPROM_EESK); 665 DELAY(40); 666 if ((CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & 667 FXP_EEPROM_EEDO) == 0) 668 break; 669 DELAY(40); 670 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 671 DELAY(40); 672 } 673 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 674 DELAY(40); 675 if (x != 6 && x != 8) { 676#ifdef DEBUG 677 printf("%s: strange EEPROM size (%d)\n", 678 device_xname(sc->sc_dev), 1 << x); 679#endif 680 } else 681 sc->sc_eeprom_size = x; 682} 683 684/* 685 * Read from the serial EEPROM. Basically, you manually shift in 686 * the read opcode (one bit at a time) and then shift in the address, 687 * and then you shift out the data (all of this one bit at a time). 688 * The word size is 16 bits, so you have to provide the address for 689 * every 16 bits of data. 690 */ 691void 692fxp_read_eeprom(struct fxp_softc *sc, uint16_t *data, int offset, int words) 693{ 694 uint16_t reg; 695 int i, x; 696 697 for (i = 0; i < words; i++) { 698 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 699 700 /* Shift in read opcode. */ 701 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_READ, 3); 702 703 /* Shift in address. */ 704 fxp_eeprom_shiftin(sc, i + offset, sc->sc_eeprom_size); 705 706 reg = FXP_EEPROM_EECS; 707 data[i] = 0; 708 709 /* Shift out data. */ 710 for (x = 16; x > 0; x--) { 711 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 712 reg | FXP_EEPROM_EESK); 713 DELAY(40); 714 if (CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & 715 FXP_EEPROM_EEDO) 716 data[i] |= (1 << (x - 1)); 717 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg); 718 DELAY(40); 719 } 720 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 721 DELAY(40); 722 } 723} 724 725/* 726 * Write data to the serial EEPROM. 727 */ 728void 729fxp_write_eeprom(struct fxp_softc *sc, uint16_t *data, int offset, int words) 730{ 731 int i, j; 732 733 for (i = 0; i < words; i++) { 734 /* Erase/write enable. */ 735 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 736 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_ERASE, 3); 737 fxp_eeprom_shiftin(sc, 0x3 << (sc->sc_eeprom_size - 2), 738 sc->sc_eeprom_size); 739 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 740 DELAY(4); 741 742 /* Shift in write opcode, address, data. */ 743 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 744 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_WRITE, 3); 745 fxp_eeprom_shiftin(sc, i + offset, sc->sc_eeprom_size); 746 fxp_eeprom_shiftin(sc, data[i], 16); 747 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 748 DELAY(4); 749 750 /* Wait for the EEPROM to finish up. */ 751 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 752 DELAY(4); 753 for (j = 0; j < 1000; j++) { 754 if (CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & 755 FXP_EEPROM_EEDO) 756 break; 757 DELAY(50); 758 } 759 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 760 DELAY(4); 761 762 /* Erase/write disable. */ 763 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS); 764 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_ERASE, 3); 765 fxp_eeprom_shiftin(sc, 0, sc->sc_eeprom_size); 766 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0); 767 DELAY(4); 768 } 769} 770 771/* 772 * Update the checksum of the EEPROM. 773 */ 774void 775fxp_eeprom_update_cksum(struct fxp_softc *sc) 776{ 777 int i; 778 uint16_t data, cksum; 779 780 cksum = 0; 781 for (i = 0; i < (1 << sc->sc_eeprom_size) - 1; i++) { 782 fxp_read_eeprom(sc, &data, i, 1); 783 cksum += data; 784 } 785 i = (1 << sc->sc_eeprom_size) - 1; 786 cksum = 0xbaba - cksum; 787 fxp_read_eeprom(sc, &data, i, 1); 788 fxp_write_eeprom(sc, &cksum, i, 1); 789 log(LOG_INFO, "%s: EEPROM checksum @ 0x%x: 0x%04x -> 0x%04x\n", 790 device_xname(sc->sc_dev), i, data, cksum); 791} 792 793/* 794 * Start packet transmission on the interface. 795 */ 796void 797fxp_start(struct ifnet *ifp) 798{ 799 struct fxp_softc *sc = ifp->if_softc; 800 struct mbuf *m0, *m; 801 struct fxp_txdesc *txd; 802 struct fxp_txsoft *txs; 803 bus_dmamap_t dmamap; 804 int error, lasttx, nexttx, opending, seg, nsegs, len; 805 806 /* 807 * If we want a re-init, bail out now. 808 */ 809 if (sc->sc_flags & FXPF_WANTINIT) { 810 ifp->if_flags |= IFF_OACTIVE; 811 return; 812 } 813 814 if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING) 815 return; 816 817 /* 818 * Remember the previous txpending and the current lasttx. 819 */ 820 opending = sc->sc_txpending; 821 lasttx = sc->sc_txlast; 822 823 /* 824 * Loop through the send queue, setting up transmit descriptors 825 * until we drain the queue, or use up all available transmit 826 * descriptors. 827 */ 828 for (;;) { 829 struct fxp_tbd *tbdp; 830 int csum_flags; 831 832 /* 833 * Grab a packet off the queue. 834 */ 835 IFQ_POLL(&ifp->if_snd, m0); 836 if (m0 == NULL) 837 break; 838 m = NULL; 839 840 if (sc->sc_txpending == FXP_NTXCB - 1) { 841 FXP_EVCNT_INCR(&sc->sc_ev_txstall); 842 break; 843 } 844 845 /* 846 * Get the next available transmit descriptor. 847 */ 848 nexttx = FXP_NEXTTX(sc->sc_txlast); 849 txd = FXP_CDTX(sc, nexttx); 850 txs = FXP_DSTX(sc, nexttx); 851 dmamap = txs->txs_dmamap; 852 853 /* 854 * Load the DMA map. If this fails, the packet either 855 * didn't fit in the allotted number of frags, or we were 856 * short on resources. In this case, we'll copy and try 857 * again. 858 */ 859 if (bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0, 860 BUS_DMA_WRITE|BUS_DMA_NOWAIT) != 0) { 861 MGETHDR(m, M_DONTWAIT, MT_DATA); 862 if (m == NULL) { 863 log(LOG_ERR, "%s: unable to allocate Tx mbuf\n", 864 device_xname(sc->sc_dev)); 865 break; 866 } 867 MCLAIM(m, &sc->sc_ethercom.ec_tx_mowner); 868 if (m0->m_pkthdr.len > MHLEN) { 869 MCLGET(m, M_DONTWAIT); 870 if ((m->m_flags & M_EXT) == 0) { 871 log(LOG_ERR, "%s: unable to allocate " 872 "Tx cluster\n", 873 device_xname(sc->sc_dev)); 874 m_freem(m); 875 break; 876 } 877 } 878 m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, void *)); 879 m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len; 880 error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, 881 m, BUS_DMA_WRITE|BUS_DMA_NOWAIT); 882 if (error) { 883 log(LOG_ERR, "%s: unable to load Tx buffer, " 884 "error = %d\n", 885 device_xname(sc->sc_dev), error); 886 break; 887 } 888 } 889 890 IFQ_DEQUEUE(&ifp->if_snd, m0); 891 csum_flags = m0->m_pkthdr.csum_flags; 892 if (m != NULL) { 893 m_freem(m0); 894 m0 = m; 895 } 896 897 /* Initialize the fraglist. */ 898 tbdp = txd->txd_tbd; 899 len = m0->m_pkthdr.len; 900 nsegs = dmamap->dm_nsegs; 901 if (sc->sc_flags & FXPF_EXT_RFA) 902 tbdp++; 903 for (seg = 0; seg < nsegs; seg++) { 904 tbdp[seg].tb_addr = 905 htole32(dmamap->dm_segs[seg].ds_addr); 906 tbdp[seg].tb_size = 907 htole32(dmamap->dm_segs[seg].ds_len); 908 } 909 if (__predict_false(len <= FXP_IP4CSUMTX_PADLEN && 910 (csum_flags & M_CSUM_IPv4) != 0)) { 911 /* 912 * Pad short packets to avoid ip4csum-tx bug. 913 * 914 * XXX Should we still consider if such short 915 * (36 bytes or less) packets might already 916 * occupy FXP_IPCB_NTXSEG (15) fragments here? 917 */ 918 KASSERT(nsegs < FXP_IPCB_NTXSEG); 919 nsegs++; 920 tbdp[seg].tb_addr = htole32(FXP_CDTXPADADDR(sc)); 921 tbdp[seg].tb_size = 922 htole32(FXP_IP4CSUMTX_PADLEN + 1 - len); 923 } 924 925 /* Sync the DMA map. */ 926 bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, 927 BUS_DMASYNC_PREWRITE); 928 929 /* 930 * Store a pointer to the packet so we can free it later. 931 */ 932 txs->txs_mbuf = m0; 933 934 /* 935 * Initialize the transmit descriptor. 936 */ 937 /* BIG_ENDIAN: no need to swap to store 0 */ 938 txd->txd_txcb.cb_status = 0; 939 txd->txd_txcb.cb_command = 940 sc->sc_txcmd | htole16(FXP_CB_COMMAND_SF); 941 txd->txd_txcb.tx_threshold = tx_threshold; 942 txd->txd_txcb.tbd_number = nsegs; 943 944 KASSERT((csum_flags & (M_CSUM_TCPv6 | M_CSUM_UDPv6)) == 0); 945 if (sc->sc_flags & FXPF_EXT_RFA) { 946 struct m_tag *vtag; 947 struct fxp_ipcb *ipcb; 948 /* 949 * Deal with TCP/IP checksum offload. Note that 950 * in order for TCP checksum offload to work, 951 * the pseudo header checksum must have already 952 * been computed and stored in the checksum field 953 * in the TCP header. The stack should have 954 * already done this for us. 955 */ 956 ipcb = &txd->txd_u.txdu_ipcb; 957 memset(ipcb, 0, sizeof(*ipcb)); 958 /* 959 * always do hardware parsing. 960 */ 961 ipcb->ipcb_ip_activation_high = 962 FXP_IPCB_HARDWAREPARSING_ENABLE; 963 /* 964 * ip checksum offloading. 965 */ 966 if (csum_flags & M_CSUM_IPv4) { 967 ipcb->ipcb_ip_schedule |= 968 FXP_IPCB_IP_CHECKSUM_ENABLE; 969 } 970 /* 971 * TCP/UDP checksum offloading. 972 */ 973 if (csum_flags & (M_CSUM_TCPv4 | M_CSUM_UDPv4)) { 974 ipcb->ipcb_ip_schedule |= 975 FXP_IPCB_TCPUDP_CHECKSUM_ENABLE; 976 } 977 978 /* 979 * request VLAN tag insertion if needed. 980 */ 981 vtag = VLAN_OUTPUT_TAG(&sc->sc_ethercom, m0); 982 if (vtag) { 983 ipcb->ipcb_vlan_id = 984 htobe16(*(u_int *)(vtag + 1)); 985 ipcb->ipcb_ip_activation_high |= 986 FXP_IPCB_INSERTVLAN_ENABLE; 987 } 988 } else { 989 KASSERT((csum_flags & 990 (M_CSUM_IPv4 | M_CSUM_TCPv4 | M_CSUM_UDPv4)) == 0); 991 } 992 993 FXP_CDTXSYNC(sc, nexttx, 994 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 995 996 /* Advance the tx pointer. */ 997 sc->sc_txpending++; 998 sc->sc_txlast = nexttx; 999 1000 /* 1001 * Pass packet to bpf if there is a listener. 1002 */ 1003 bpf_mtap(ifp, m0); 1004 } 1005 1006 if (sc->sc_txpending == FXP_NTXCB - 1) { 1007 /* No more slots; notify upper layer. */ 1008 ifp->if_flags |= IFF_OACTIVE; 1009 } 1010 1011 if (sc->sc_txpending != opending) { 1012 /* 1013 * We enqueued packets. If the transmitter was idle, 1014 * reset the txdirty pointer. 1015 */ 1016 if (opending == 0) 1017 sc->sc_txdirty = FXP_NEXTTX(lasttx); 1018 1019 /* 1020 * Cause the chip to interrupt and suspend command 1021 * processing once the last packet we've enqueued 1022 * has been transmitted. 1023 * 1024 * To avoid a race between updating status bits 1025 * by the fxp chip and clearing command bits 1026 * by this function on machines which don't have 1027 * atomic methods to clear/set bits in memory 1028 * smaller than 32bits (both cb_status and cb_command 1029 * members are uint16_t and in the same 32bit word), 1030 * we have to prepare a dummy TX descriptor which has 1031 * NOP command and just causes a TX completion interrupt. 1032 */ 1033 sc->sc_txpending++; 1034 sc->sc_txlast = FXP_NEXTTX(sc->sc_txlast); 1035 txd = FXP_CDTX(sc, sc->sc_txlast); 1036 /* BIG_ENDIAN: no need to swap to store 0 */ 1037 txd->txd_txcb.cb_status = 0; 1038 txd->txd_txcb.cb_command = htole16(FXP_CB_COMMAND_NOP | 1039 FXP_CB_COMMAND_I | FXP_CB_COMMAND_S); 1040 FXP_CDTXSYNC(sc, sc->sc_txlast, 1041 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1042 1043 /* 1044 * The entire packet chain is set up. Clear the suspend bit 1045 * on the command prior to the first packet we set up. 1046 */ 1047 FXP_CDTXSYNC(sc, lasttx, 1048 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1049 FXP_CDTX(sc, lasttx)->txd_txcb.cb_command &= 1050 htole16(~FXP_CB_COMMAND_S); 1051 FXP_CDTXSYNC(sc, lasttx, 1052 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1053 1054 /* 1055 * Issue a Resume command in case the chip was suspended. 1056 */ 1057 fxp_scb_wait(sc); 1058 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_RESUME); 1059 1060 /* Set a watchdog timer in case the chip flakes out. */ 1061 ifp->if_timer = 5; 1062 } 1063} 1064 1065/* 1066 * Process interface interrupts. 1067 */ 1068int 1069fxp_intr(void *arg) 1070{ 1071 struct fxp_softc *sc = arg; 1072 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1073 bus_dmamap_t rxmap; 1074 int claimed = 0, rnr; 1075 uint8_t statack; 1076 1077 if (!device_is_active(sc->sc_dev) || sc->sc_enabled == 0) 1078 return (0); 1079 /* 1080 * If the interface isn't running, don't try to 1081 * service the interrupt.. just ack it and bail. 1082 */ 1083 if ((ifp->if_flags & IFF_RUNNING) == 0) { 1084 statack = CSR_READ_1(sc, FXP_CSR_SCB_STATACK); 1085 if (statack) { 1086 claimed = 1; 1087 CSR_WRITE_1(sc, FXP_CSR_SCB_STATACK, statack); 1088 } 1089 return (claimed); 1090 } 1091 1092 while ((statack = CSR_READ_1(sc, FXP_CSR_SCB_STATACK)) != 0) { 1093 claimed = 1; 1094 1095 /* 1096 * First ACK all the interrupts in this pass. 1097 */ 1098 CSR_WRITE_1(sc, FXP_CSR_SCB_STATACK, statack); 1099 1100 /* 1101 * Process receiver interrupts. If a no-resource (RNR) 1102 * condition exists, get whatever packets we can and 1103 * re-start the receiver. 1104 */ 1105 rnr = (statack & (FXP_SCB_STATACK_RNR | FXP_SCB_STATACK_SWI)) ? 1106 1 : 0; 1107 if (statack & (FXP_SCB_STATACK_FR | FXP_SCB_STATACK_RNR | 1108 FXP_SCB_STATACK_SWI)) { 1109 FXP_EVCNT_INCR(&sc->sc_ev_rxintr); 1110 rnr |= fxp_rxintr(sc); 1111 } 1112 1113 /* 1114 * Free any finished transmit mbuf chains. 1115 */ 1116 if (statack & (FXP_SCB_STATACK_CXTNO|FXP_SCB_STATACK_CNA)) { 1117 FXP_EVCNT_INCR(&sc->sc_ev_txintr); 1118 fxp_txintr(sc); 1119 1120 /* 1121 * Try to get more packets going. 1122 */ 1123 fxp_start(ifp); 1124 1125 if (sc->sc_txpending == 0) { 1126 /* 1127 * Tell them that they can re-init now. 1128 */ 1129 if (sc->sc_flags & FXPF_WANTINIT) 1130 wakeup(sc); 1131 } 1132 } 1133 1134 if (rnr) { 1135 fxp_scb_wait(sc); 1136 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_ABORT); 1137 rxmap = M_GETCTX(sc->sc_rxq.ifq_head, bus_dmamap_t); 1138 fxp_scb_wait(sc); 1139 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 1140 rxmap->dm_segs[0].ds_addr + 1141 RFA_ALIGNMENT_FUDGE); 1142 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_START); 1143 } 1144 } 1145 1146 if (claimed) 1147 rnd_add_uint32(&sc->rnd_source, statack); 1148 return (claimed); 1149} 1150 1151/* 1152 * Handle transmit completion interrupts. 1153 */ 1154void 1155fxp_txintr(struct fxp_softc *sc) 1156{ 1157 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1158 struct fxp_txdesc *txd; 1159 struct fxp_txsoft *txs; 1160 int i; 1161 uint16_t txstat; 1162 1163 ifp->if_flags &= ~IFF_OACTIVE; 1164 for (i = sc->sc_txdirty; sc->sc_txpending != 0; 1165 i = FXP_NEXTTX(i), sc->sc_txpending--) { 1166 txd = FXP_CDTX(sc, i); 1167 txs = FXP_DSTX(sc, i); 1168 1169 FXP_CDTXSYNC(sc, i, 1170 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1171 1172 /* skip dummy NOP TX descriptor */ 1173 if ((le16toh(txd->txd_txcb.cb_command) & FXP_CB_COMMAND_CMD) 1174 == FXP_CB_COMMAND_NOP) 1175 continue; 1176 1177 txstat = le16toh(txd->txd_txcb.cb_status); 1178 1179 if ((txstat & FXP_CB_STATUS_C) == 0) 1180 break; 1181 1182 bus_dmamap_sync(sc->sc_dmat, txs->txs_dmamap, 1183 0, txs->txs_dmamap->dm_mapsize, 1184 BUS_DMASYNC_POSTWRITE); 1185 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 1186 m_freem(txs->txs_mbuf); 1187 txs->txs_mbuf = NULL; 1188 } 1189 1190 /* Update the dirty transmit buffer pointer. */ 1191 sc->sc_txdirty = i; 1192 1193 /* 1194 * Cancel the watchdog timer if there are no pending 1195 * transmissions. 1196 */ 1197 if (sc->sc_txpending == 0) 1198 ifp->if_timer = 0; 1199} 1200 1201/* 1202 * fxp_rx_hwcksum: check status of H/W offloading for received packets. 1203 */ 1204 1205void 1206fxp_rx_hwcksum(struct fxp_softc *sc, struct mbuf *m, const struct fxp_rfa *rfa, 1207 u_int len) 1208{ 1209 uint32_t csum_data; 1210 int csum_flags; 1211 1212 /* 1213 * check H/W Checksumming. 1214 */ 1215 1216 csum_flags = 0; 1217 csum_data = 0; 1218 1219 if ((sc->sc_flags & FXPF_EXT_RFA) != 0) { 1220 uint8_t csum_stat; 1221 1222 csum_stat = rfa->cksum_stat; 1223 if ((rfa->rfa_status & htole16(FXP_RFA_STATUS_PARSE)) == 0) 1224 goto out; 1225 1226 if (csum_stat & FXP_RFDX_CS_IP_CSUM_BIT_VALID) { 1227 csum_flags = M_CSUM_IPv4; 1228 if ((csum_stat & FXP_RFDX_CS_IP_CSUM_VALID) == 0) 1229 csum_flags |= M_CSUM_IPv4_BAD; 1230 } 1231 1232 if (csum_stat & FXP_RFDX_CS_TCPUDP_CSUM_BIT_VALID) { 1233 csum_flags |= (M_CSUM_TCPv4|M_CSUM_UDPv4); /* XXX */ 1234 if ((csum_stat & FXP_RFDX_CS_TCPUDP_CSUM_VALID) == 0) 1235 csum_flags |= M_CSUM_TCP_UDP_BAD; 1236 } 1237 1238 } else if ((sc->sc_flags & FXPF_82559_RXCSUM) != 0) { 1239 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1240 struct ether_header *eh; 1241 struct ip *ip; 1242 struct udphdr *uh; 1243 u_int hlen, pktlen; 1244 1245 if (len < ETHER_HDR_LEN + sizeof(struct ip)) 1246 goto out; 1247 pktlen = len - ETHER_HDR_LEN; 1248 eh = mtod(m, struct ether_header *); 1249 if (ntohs(eh->ether_type) != ETHERTYPE_IP) 1250 goto out; 1251 ip = (struct ip *)((uint8_t *)eh + ETHER_HDR_LEN); 1252 if (ip->ip_v != IPVERSION) 1253 goto out; 1254 1255 hlen = ip->ip_hl << 2; 1256 if (hlen < sizeof(struct ip)) 1257 goto out; 1258 1259 /* 1260 * Bail if too short, has random trailing garbage, truncated, 1261 * fragment, or has ethernet pad. 1262 */ 1263 if (ntohs(ip->ip_len) < hlen || 1264 ntohs(ip->ip_len) != pktlen || 1265 (ntohs(ip->ip_off) & (IP_MF | IP_OFFMASK)) != 0) 1266 goto out; 1267 1268 switch (ip->ip_p) { 1269 case IPPROTO_TCP: 1270 if ((ifp->if_csum_flags_rx & M_CSUM_TCPv4) == 0 || 1271 pktlen < (hlen + sizeof(struct tcphdr))) 1272 goto out; 1273 csum_flags = 1274 M_CSUM_TCPv4 | M_CSUM_DATA | M_CSUM_NO_PSEUDOHDR; 1275 break; 1276 case IPPROTO_UDP: 1277 if ((ifp->if_csum_flags_rx & M_CSUM_UDPv4) == 0 || 1278 pktlen < (hlen + sizeof(struct udphdr))) 1279 goto out; 1280 uh = (struct udphdr *)((uint8_t *)ip + hlen); 1281 if (uh->uh_sum == 0) 1282 goto out; /* no checksum */ 1283 csum_flags = 1284 M_CSUM_UDPv4 | M_CSUM_DATA | M_CSUM_NO_PSEUDOHDR; 1285 break; 1286 default: 1287 goto out; 1288 } 1289 1290 /* Extract computed checksum. */ 1291 csum_data = be16dec(mtod(m, uint8_t *) + len); 1292 1293 /* 1294 * The computed checksum includes IP headers, 1295 * so we have to deduct them. 1296 */ 1297#if 0 1298 /* 1299 * But in TCP/UDP layer we can assume the IP header is valid, 1300 * i.e. a sum of the whole IP header should be 0xffff, 1301 * so we don't have to bother to deduct it. 1302 */ 1303 if (hlen > 0) { 1304 uint32_t hsum; 1305 const uint16_t *iphdr; 1306 hsum = 0; 1307 iphdr = (uint16_t *)ip; 1308 1309 while (hlen > 1) { 1310 hsum += ntohs(*iphdr++); 1311 hlen -= sizeof(uint16_t); 1312 } 1313 while (hsum >> 16) 1314 hsum = (hsum >> 16) + (hsum & 0xffff); 1315 1316 csum_data += (uint16_t)~hsum; 1317 1318 while (csum_data >> 16) 1319 csum_data = 1320 (csum_data >> 16) + (csum_data & 0xffff); 1321 } 1322#endif 1323 } 1324 out: 1325 m->m_pkthdr.csum_flags = csum_flags; 1326 m->m_pkthdr.csum_data = csum_data; 1327} 1328 1329/* 1330 * Handle receive interrupts. 1331 */ 1332int 1333fxp_rxintr(struct fxp_softc *sc) 1334{ 1335 struct ethercom *ec = &sc->sc_ethercom; 1336 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1337 struct mbuf *m, *m0; 1338 bus_dmamap_t rxmap; 1339 struct fxp_rfa *rfa; 1340 int rnr; 1341 uint16_t len, rxstat; 1342 1343 rnr = 0; 1344 1345 for (;;) { 1346 m = sc->sc_rxq.ifq_head; 1347 rfa = FXP_MTORFA(m); 1348 rxmap = M_GETCTX(m, bus_dmamap_t); 1349 1350 FXP_RFASYNC(sc, m, 1351 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1352 1353 rxstat = le16toh(rfa->rfa_status); 1354 1355 if ((rxstat & FXP_RFA_STATUS_RNR) != 0) 1356 rnr = 1; 1357 1358 if ((rxstat & FXP_RFA_STATUS_C) == 0) { 1359 /* 1360 * We have processed all of the 1361 * receive buffers. 1362 */ 1363 FXP_RFASYNC(sc, m, BUS_DMASYNC_PREREAD); 1364 return rnr; 1365 } 1366 1367 IF_DEQUEUE(&sc->sc_rxq, m); 1368 1369 FXP_RXBUFSYNC(sc, m, BUS_DMASYNC_POSTREAD); 1370 1371 len = le16toh(rfa->actual_size) & 1372 (m->m_ext.ext_size - 1); 1373 if ((sc->sc_flags & FXPF_82559_RXCSUM) != 0) { 1374 /* Adjust for appended checksum bytes. */ 1375 len -= sizeof(uint16_t); 1376 } 1377 1378 if (len < sizeof(struct ether_header)) { 1379 /* 1380 * Runt packet; drop it now. 1381 */ 1382 FXP_INIT_RFABUF(sc, m); 1383 continue; 1384 } 1385 1386 /* 1387 * If support for 802.1Q VLAN sized frames is 1388 * enabled, we need to do some additional error 1389 * checking (as we are saving bad frames, in 1390 * order to receive the larger ones). 1391 */ 1392 if ((ec->ec_capenable & ETHERCAP_VLAN_MTU) != 0 && 1393 (rxstat & (FXP_RFA_STATUS_OVERRUN| 1394 FXP_RFA_STATUS_RNR| 1395 FXP_RFA_STATUS_ALIGN| 1396 FXP_RFA_STATUS_CRC)) != 0) { 1397 FXP_INIT_RFABUF(sc, m); 1398 continue; 1399 } 1400 1401 /* 1402 * check VLAN tag stripping. 1403 */ 1404 if ((sc->sc_flags & FXPF_EXT_RFA) != 0 && 1405 (rfa->rfa_status & htole16(FXP_RFA_STATUS_VLAN)) != 0) { 1406 struct m_tag *vtag; 1407 1408 vtag = m_tag_get(PACKET_TAG_VLAN, sizeof(u_int), 1409 M_NOWAIT); 1410 if (vtag == NULL) 1411 goto dropit; 1412 *(u_int *)(vtag + 1) = be16toh(rfa->vlan_id); 1413 m_tag_prepend(m, vtag); 1414 } 1415 1416 /* Do checksum checking. */ 1417 if ((ifp->if_csum_flags_rx & (M_CSUM_TCPv4|M_CSUM_UDPv4)) != 0) 1418 fxp_rx_hwcksum(sc, m, rfa, len); 1419 1420 /* 1421 * If the packet is small enough to fit in a 1422 * single header mbuf, allocate one and copy 1423 * the data into it. This greatly reduces 1424 * memory consumption when we receive lots 1425 * of small packets. 1426 * 1427 * Otherwise, we add a new buffer to the receive 1428 * chain. If this fails, we drop the packet and 1429 * recycle the old buffer. 1430 */ 1431 if (fxp_copy_small != 0 && len <= MHLEN) { 1432 MGETHDR(m0, M_DONTWAIT, MT_DATA); 1433 if (m0 == NULL) 1434 goto dropit; 1435 MCLAIM(m0, &sc->sc_ethercom.ec_rx_mowner); 1436 memcpy(mtod(m0, void *), 1437 mtod(m, void *), len); 1438 m0->m_pkthdr.csum_flags = m->m_pkthdr.csum_flags; 1439 m0->m_pkthdr.csum_data = m->m_pkthdr.csum_data; 1440 FXP_INIT_RFABUF(sc, m); 1441 m = m0; 1442 } else { 1443 if (fxp_add_rfabuf(sc, rxmap, 1) != 0) { 1444 dropit: 1445 ifp->if_ierrors++; 1446 FXP_INIT_RFABUF(sc, m); 1447 continue; 1448 } 1449 } 1450 1451 m->m_pkthdr.rcvif = ifp; 1452 m->m_pkthdr.len = m->m_len = len; 1453 1454 /* 1455 * Pass this up to any BPF listeners, but only 1456 * pass it up the stack if it's for us. 1457 */ 1458 bpf_mtap(ifp, m); 1459 1460 /* Pass it on. */ 1461 (*ifp->if_input)(ifp, m); 1462 } 1463} 1464 1465/* 1466 * Update packet in/out/collision statistics. The i82557 doesn't 1467 * allow you to access these counters without doing a fairly 1468 * expensive DMA to get _all_ of the statistics it maintains, so 1469 * we do this operation here only once per second. The statistics 1470 * counters in the kernel are updated from the previous dump-stats 1471 * DMA and then a new dump-stats DMA is started. The on-chip 1472 * counters are zeroed when the DMA completes. If we can't start 1473 * the DMA immediately, we don't wait - we just prepare to read 1474 * them again next time. 1475 */ 1476void 1477fxp_tick(void *arg) 1478{ 1479 struct fxp_softc *sc = arg; 1480 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1481 struct fxp_stats *sp = &sc->sc_control_data->fcd_stats; 1482 int s; 1483 1484 if (!device_is_active(sc->sc_dev)) 1485 return; 1486 1487 s = splnet(); 1488 1489 FXP_CDSTATSSYNC(sc, BUS_DMASYNC_POSTREAD); 1490 1491 ifp->if_opackets += le32toh(sp->tx_good); 1492 ifp->if_collisions += le32toh(sp->tx_total_collisions); 1493 if (sp->rx_good) { 1494 ifp->if_ipackets += le32toh(sp->rx_good); 1495 sc->sc_rxidle = 0; 1496 } else if (sc->sc_flags & FXPF_RECV_WORKAROUND) { 1497 sc->sc_rxidle++; 1498 } 1499 ifp->if_ierrors += 1500 le32toh(sp->rx_crc_errors) + 1501 le32toh(sp->rx_alignment_errors) + 1502 le32toh(sp->rx_rnr_errors) + 1503 le32toh(sp->rx_overrun_errors); 1504 /* 1505 * If any transmit underruns occurred, bump up the transmit 1506 * threshold by another 512 bytes (64 * 8). 1507 */ 1508 if (sp->tx_underruns) { 1509 ifp->if_oerrors += le32toh(sp->tx_underruns); 1510 if (tx_threshold < 192) 1511 tx_threshold += 64; 1512 } 1513#ifdef FXP_EVENT_COUNTERS 1514 if (sc->sc_flags & FXPF_FC) { 1515 sc->sc_ev_txpause.ev_count += sp->tx_pauseframes; 1516 sc->sc_ev_rxpause.ev_count += sp->rx_pauseframes; 1517 } 1518#endif 1519 1520 /* 1521 * If we haven't received any packets in FXP_MAX_RX_IDLE seconds, 1522 * then assume the receiver has locked up and attempt to clear 1523 * the condition by reprogramming the multicast filter (actually, 1524 * resetting the interface). This is a work-around for a bug in 1525 * the 82557 where the receiver locks up if it gets certain types 1526 * of garbage in the synchronization bits prior to the packet header. 1527 * This bug is supposed to only occur in 10Mbps mode, but has been 1528 * seen to occur in 100Mbps mode as well (perhaps due to a 10/100 1529 * speed transition). 1530 */ 1531 if (sc->sc_rxidle > FXP_MAX_RX_IDLE) { 1532 (void) fxp_init(ifp); 1533 splx(s); 1534 return; 1535 } 1536 /* 1537 * If there is no pending command, start another stats 1538 * dump. Otherwise punt for now. 1539 */ 1540 if (CSR_READ_1(sc, FXP_CSR_SCB_COMMAND) == 0) { 1541 /* 1542 * Start another stats dump. 1543 */ 1544 FXP_CDSTATSSYNC(sc, BUS_DMASYNC_PREREAD); 1545 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_DUMPRESET); 1546 } else { 1547 /* 1548 * A previous command is still waiting to be accepted. 1549 * Just zero our copy of the stats and wait for the 1550 * next timer event to update them. 1551 */ 1552 /* BIG_ENDIAN: no swap required to store 0 */ 1553 sp->tx_good = 0; 1554 sp->tx_underruns = 0; 1555 sp->tx_total_collisions = 0; 1556 1557 sp->rx_good = 0; 1558 sp->rx_crc_errors = 0; 1559 sp->rx_alignment_errors = 0; 1560 sp->rx_rnr_errors = 0; 1561 sp->rx_overrun_errors = 0; 1562 if (sc->sc_flags & FXPF_FC) { 1563 sp->tx_pauseframes = 0; 1564 sp->rx_pauseframes = 0; 1565 } 1566 } 1567 1568 if (sc->sc_flags & FXPF_MII) { 1569 /* Tick the MII clock. */ 1570 mii_tick(&sc->sc_mii); 1571 } 1572 1573 splx(s); 1574 1575 /* 1576 * Schedule another timeout one second from now. 1577 */ 1578 callout_reset(&sc->sc_callout, hz, fxp_tick, sc); 1579} 1580 1581/* 1582 * Drain the receive queue. 1583 */ 1584void 1585fxp_rxdrain(struct fxp_softc *sc) 1586{ 1587 bus_dmamap_t rxmap; 1588 struct mbuf *m; 1589 1590 for (;;) { 1591 IF_DEQUEUE(&sc->sc_rxq, m); 1592 if (m == NULL) 1593 break; 1594 rxmap = M_GETCTX(m, bus_dmamap_t); 1595 bus_dmamap_unload(sc->sc_dmat, rxmap); 1596 FXP_RXMAP_PUT(sc, rxmap); 1597 m_freem(m); 1598 } 1599} 1600 1601/* 1602 * Stop the interface. Cancels the statistics updater and resets 1603 * the interface. 1604 */ 1605void 1606fxp_stop(struct ifnet *ifp, int disable) 1607{ 1608 struct fxp_softc *sc = ifp->if_softc; 1609 struct fxp_txsoft *txs; 1610 int i; 1611 1612 /* 1613 * Turn down interface (done early to avoid bad interactions 1614 * between panics, shutdown hooks, and the watchdog timer) 1615 */ 1616 ifp->if_timer = 0; 1617 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1618 1619 /* 1620 * Cancel stats updater. 1621 */ 1622 callout_stop(&sc->sc_callout); 1623 if (sc->sc_flags & FXPF_MII) { 1624 /* Down the MII. */ 1625 mii_down(&sc->sc_mii); 1626 } 1627 1628 /* 1629 * Issue software reset. This unloads any microcode that 1630 * might already be loaded. 1631 */ 1632 sc->sc_flags &= ~FXPF_UCODE_LOADED; 1633 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SOFTWARE_RESET); 1634 DELAY(50); 1635 1636 /* 1637 * Release any xmit buffers. 1638 */ 1639 for (i = 0; i < FXP_NTXCB; i++) { 1640 txs = FXP_DSTX(sc, i); 1641 if (txs->txs_mbuf != NULL) { 1642 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 1643 m_freem(txs->txs_mbuf); 1644 txs->txs_mbuf = NULL; 1645 } 1646 } 1647 sc->sc_txpending = 0; 1648 1649 if (disable) { 1650 fxp_rxdrain(sc); 1651 fxp_disable(sc); 1652 } 1653 1654} 1655 1656/* 1657 * Watchdog/transmission transmit timeout handler. Called when a 1658 * transmission is started on the interface, but no interrupt is 1659 * received before the timeout. This usually indicates that the 1660 * card has wedged for some reason. 1661 */ 1662void 1663fxp_watchdog(struct ifnet *ifp) 1664{ 1665 struct fxp_softc *sc = ifp->if_softc; 1666 1667 log(LOG_ERR, "%s: device timeout\n", device_xname(sc->sc_dev)); 1668 ifp->if_oerrors++; 1669 1670 (void) fxp_init(ifp); 1671} 1672 1673/* 1674 * Initialize the interface. Must be called at splnet(). 1675 */ 1676int 1677fxp_init(struct ifnet *ifp) 1678{ 1679 struct fxp_softc *sc = ifp->if_softc; 1680 struct fxp_cb_config *cbp; 1681 struct fxp_cb_ias *cb_ias; 1682 struct fxp_txdesc *txd; 1683 bus_dmamap_t rxmap; 1684 int i, prm, save_bf, lrxen, vlan_drop, allm, error = 0; 1685 uint16_t status; 1686 1687 if ((error = fxp_enable(sc)) != 0) 1688 goto out; 1689 1690 /* 1691 * Cancel any pending I/O 1692 */ 1693 fxp_stop(ifp, 0); 1694 1695 /* 1696 * XXX just setting sc_flags to 0 here clears any FXPF_MII 1697 * flag, and this prevents the MII from detaching resulting in 1698 * a panic. The flags field should perhaps be split in runtime 1699 * flags and more static information. For now, just clear the 1700 * only other flag set. 1701 */ 1702 1703 sc->sc_flags &= ~FXPF_WANTINIT; 1704 1705 /* 1706 * Initialize base of CBL and RFA memory. Loading with zero 1707 * sets it up for regular linear addressing. 1708 */ 1709 fxp_scb_wait(sc); 1710 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 0); 1711 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_BASE); 1712 1713 fxp_scb_wait(sc); 1714 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_BASE); 1715 1716 /* 1717 * Initialize the multicast filter. Do this now, since we might 1718 * have to setup the config block differently. 1719 */ 1720 fxp_mc_setup(sc); 1721 1722 prm = (ifp->if_flags & IFF_PROMISC) ? 1 : 0; 1723 allm = (ifp->if_flags & IFF_ALLMULTI) ? 1 : 0; 1724 1725 /* 1726 * In order to support receiving 802.1Q VLAN frames, we have to 1727 * enable "save bad frames", since they are 4 bytes larger than 1728 * the normal Ethernet maximum frame length. On i82558 and later, 1729 * we have a better mechanism for this. 1730 */ 1731 save_bf = 0; 1732 lrxen = 0; 1733 vlan_drop = 0; 1734 if (sc->sc_ethercom.ec_capenable & ETHERCAP_VLAN_MTU) { 1735 if (sc->sc_rev < FXP_REV_82558_A4) 1736 save_bf = 1; 1737 else 1738 lrxen = 1; 1739 if (sc->sc_rev >= FXP_REV_82550) 1740 vlan_drop = 1; 1741 } 1742 1743 /* 1744 * Initialize base of dump-stats buffer. 1745 */ 1746 fxp_scb_wait(sc); 1747 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 1748 sc->sc_cddma + FXP_CDSTATSOFF); 1749 FXP_CDSTATSSYNC(sc, BUS_DMASYNC_PREREAD); 1750 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_DUMP_ADR); 1751 1752 cbp = &sc->sc_control_data->fcd_configcb; 1753 memset(cbp, 0, sizeof(struct fxp_cb_config)); 1754 1755 /* 1756 * Load microcode for this controller. 1757 */ 1758 fxp_load_ucode(sc); 1759 1760 if ((sc->sc_ethercom.ec_if.if_flags & IFF_LINK1)) 1761 sc->sc_flags |= FXPF_RECV_WORKAROUND; 1762 else 1763 sc->sc_flags &= ~FXPF_RECV_WORKAROUND; 1764 1765 /* 1766 * This copy is kind of disgusting, but there are a bunch of must be 1767 * zero and must be one bits in this structure and this is the easiest 1768 * way to initialize them all to proper values. 1769 */ 1770 memcpy(cbp, fxp_cb_config_template, sizeof(fxp_cb_config_template)); 1771 1772 /* BIG_ENDIAN: no need to swap to store 0 */ 1773 cbp->cb_status = 0; 1774 cbp->cb_command = htole16(FXP_CB_COMMAND_CONFIG | 1775 FXP_CB_COMMAND_EL); 1776 /* BIG_ENDIAN: no need to swap to store 0xffffffff */ 1777 cbp->link_addr = 0xffffffff; /* (no) next command */ 1778 /* bytes in config block */ 1779 cbp->byte_count = (sc->sc_flags & FXPF_EXT_RFA) ? 1780 FXP_EXT_CONFIG_LEN : FXP_CONFIG_LEN; 1781 cbp->rx_fifo_limit = 8; /* rx fifo threshold (32 bytes) */ 1782 cbp->tx_fifo_limit = 0; /* tx fifo threshold (0 bytes) */ 1783 cbp->adaptive_ifs = 0; /* (no) adaptive interframe spacing */ 1784 cbp->mwi_enable = (sc->sc_flags & FXPF_MWI) ? 1 : 0; 1785 cbp->type_enable = 0; /* actually reserved */ 1786 cbp->read_align_en = (sc->sc_flags & FXPF_READ_ALIGN) ? 1 : 0; 1787 cbp->end_wr_on_cl = (sc->sc_flags & FXPF_WRITE_ALIGN) ? 1 : 0; 1788 cbp->rx_dma_bytecount = 0; /* (no) rx DMA max */ 1789 cbp->tx_dma_bytecount = 0; /* (no) tx DMA max */ 1790 cbp->dma_mbce = 0; /* (disable) dma max counters */ 1791 cbp->late_scb = 0; /* (don't) defer SCB update */ 1792 cbp->tno_int_or_tco_en =0; /* (disable) tx not okay interrupt */ 1793 cbp->ci_int = 1; /* interrupt on CU idle */ 1794 cbp->ext_txcb_dis = (sc->sc_flags & FXPF_EXT_TXCB) ? 0 : 1; 1795 cbp->ext_stats_dis = 1; /* disable extended counters */ 1796 cbp->keep_overrun_rx = 0; /* don't pass overrun frames to host */ 1797 cbp->save_bf = save_bf;/* save bad frames */ 1798 cbp->disc_short_rx = !prm; /* discard short packets */ 1799 cbp->underrun_retry = 1; /* retry mode (1) on DMA underrun */ 1800 cbp->ext_rfa = (sc->sc_flags & FXPF_EXT_RFA) ? 1 : 0; 1801 cbp->two_frames = 0; /* do not limit FIFO to 2 frames */ 1802 cbp->dyn_tbd = 0; /* (no) dynamic TBD mode */ 1803 /* interface mode */ 1804 cbp->mediatype = (sc->sc_flags & FXPF_MII) ? 1 : 0; 1805 cbp->csma_dis = 0; /* (don't) disable link */ 1806 cbp->tcp_udp_cksum = (sc->sc_flags & FXPF_82559_RXCSUM) ? 1 : 0; 1807 /* (don't) enable RX checksum */ 1808 cbp->vlan_tco = 0; /* (don't) enable vlan wakeup */ 1809 cbp->link_wake_en = 0; /* (don't) assert PME# on link change */ 1810 cbp->arp_wake_en = 0; /* (don't) assert PME# on arp */ 1811 cbp->mc_wake_en = 0; /* (don't) assert PME# on mcmatch */ 1812 cbp->nsai = 1; /* (don't) disable source addr insert */ 1813 cbp->preamble_length = 2; /* (7 byte) preamble */ 1814 cbp->loopback = 0; /* (don't) loopback */ 1815 cbp->linear_priority = 0; /* (normal CSMA/CD operation) */ 1816 cbp->linear_pri_mode = 0; /* (wait after xmit only) */ 1817 cbp->interfrm_spacing = 6; /* (96 bits of) interframe spacing */ 1818 cbp->promiscuous = prm; /* promiscuous mode */ 1819 cbp->bcast_disable = 0; /* (don't) disable broadcasts */ 1820 cbp->wait_after_win = 0; /* (don't) enable modified backoff alg*/ 1821 cbp->ignore_ul = 0; /* consider U/L bit in IA matching */ 1822 cbp->crc16_en = 0; /* (don't) enable crc-16 algorithm */ 1823 cbp->crscdt = (sc->sc_flags & FXPF_MII) ? 0 : 1; 1824 cbp->stripping = !prm; /* truncate rx packet to byte count */ 1825 cbp->padding = 1; /* (do) pad short tx packets */ 1826 cbp->rcv_crc_xfer = 0; /* (don't) xfer CRC to host */ 1827 cbp->long_rx_en = lrxen; /* long packet receive enable */ 1828 cbp->ia_wake_en = 0; /* (don't) wake up on address match */ 1829 cbp->magic_pkt_dis = 0; /* (don't) disable magic packet */ 1830 /* must set wake_en in PMCSR also */ 1831 cbp->force_fdx = 0; /* (don't) force full duplex */ 1832 cbp->fdx_pin_en = 1; /* (enable) FDX# pin */ 1833 cbp->multi_ia = 0; /* (don't) accept multiple IAs */ 1834 cbp->mc_all = allm; /* accept all multicasts */ 1835 cbp->ext_rx_mode = (sc->sc_flags & FXPF_EXT_RFA) ? 1 : 0; 1836 cbp->vlan_drop_en = vlan_drop; 1837 1838 if (!(sc->sc_flags & FXPF_FC)) { 1839 /* 1840 * The i82557 has no hardware flow control, the values 1841 * here are the defaults for the chip. 1842 */ 1843 cbp->fc_delay_lsb = 0; 1844 cbp->fc_delay_msb = 0x40; 1845 cbp->pri_fc_thresh = 3; 1846 cbp->tx_fc_dis = 0; 1847 cbp->rx_fc_restop = 0; 1848 cbp->rx_fc_restart = 0; 1849 cbp->fc_filter = 0; 1850 cbp->pri_fc_loc = 1; 1851 } else { 1852 cbp->fc_delay_lsb = 0x1f; 1853 cbp->fc_delay_msb = 0x01; 1854 cbp->pri_fc_thresh = 3; 1855 cbp->tx_fc_dis = 0; /* enable transmit FC */ 1856 cbp->rx_fc_restop = 1; /* enable FC restop frames */ 1857 cbp->rx_fc_restart = 1; /* enable FC restart frames */ 1858 cbp->fc_filter = !prm; /* drop FC frames to host */ 1859 cbp->pri_fc_loc = 1; /* FC pri location (byte31) */ 1860 cbp->ext_stats_dis = 0; /* enable extended stats */ 1861 } 1862 1863 FXP_CDCONFIGSYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1864 1865 /* 1866 * Start the config command/DMA. 1867 */ 1868 fxp_scb_wait(sc); 1869 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDCONFIGOFF); 1870 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1871 /* ...and wait for it to complete. */ 1872 for (i = 1000; i > 0; i--) { 1873 FXP_CDCONFIGSYNC(sc, 1874 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1875 status = le16toh(cbp->cb_status); 1876 FXP_CDCONFIGSYNC(sc, BUS_DMASYNC_PREREAD); 1877 if ((status & FXP_CB_STATUS_C) != 0) 1878 break; 1879 DELAY(1); 1880 } 1881 if (i == 0) { 1882 log(LOG_WARNING, "%s: line %d: dmasync timeout\n", 1883 device_xname(sc->sc_dev), __LINE__); 1884 return (ETIMEDOUT); 1885 } 1886 1887 /* 1888 * Initialize the station address. 1889 */ 1890 cb_ias = &sc->sc_control_data->fcd_iascb; 1891 /* BIG_ENDIAN: no need to swap to store 0 */ 1892 cb_ias->cb_status = 0; 1893 cb_ias->cb_command = htole16(FXP_CB_COMMAND_IAS | FXP_CB_COMMAND_EL); 1894 /* BIG_ENDIAN: no need to swap to store 0xffffffff */ 1895 cb_ias->link_addr = 0xffffffff; 1896 memcpy(cb_ias->macaddr, CLLADDR(ifp->if_sadl), ETHER_ADDR_LEN); 1897 1898 FXP_CDIASSYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1899 1900 /* 1901 * Start the IAS (Individual Address Setup) command/DMA. 1902 */ 1903 fxp_scb_wait(sc); 1904 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDIASOFF); 1905 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1906 /* ...and wait for it to complete. */ 1907 for (i = 1000; i > 0; i++) { 1908 FXP_CDIASSYNC(sc, 1909 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 1910 status = le16toh(cb_ias->cb_status); 1911 FXP_CDIASSYNC(sc, BUS_DMASYNC_PREREAD); 1912 if ((status & FXP_CB_STATUS_C) != 0) 1913 break; 1914 DELAY(1); 1915 } 1916 if (i == 0) { 1917 log(LOG_WARNING, "%s: line %d: dmasync timeout\n", 1918 device_xname(sc->sc_dev), __LINE__); 1919 return (ETIMEDOUT); 1920 } 1921 1922 /* 1923 * Initialize the transmit descriptor ring. txlast is initialized 1924 * to the end of the list so that it will wrap around to the first 1925 * descriptor when the first packet is transmitted. 1926 */ 1927 for (i = 0; i < FXP_NTXCB; i++) { 1928 txd = FXP_CDTX(sc, i); 1929 memset(txd, 0, sizeof(*txd)); 1930 txd->txd_txcb.cb_command = 1931 htole16(FXP_CB_COMMAND_NOP | FXP_CB_COMMAND_S); 1932 txd->txd_txcb.link_addr = 1933 htole32(FXP_CDTXADDR(sc, FXP_NEXTTX(i))); 1934 if (sc->sc_flags & FXPF_EXT_TXCB) 1935 txd->txd_txcb.tbd_array_addr = 1936 htole32(FXP_CDTBDADDR(sc, i) + 1937 (2 * sizeof(struct fxp_tbd))); 1938 else 1939 txd->txd_txcb.tbd_array_addr = 1940 htole32(FXP_CDTBDADDR(sc, i)); 1941 FXP_CDTXSYNC(sc, i, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1942 } 1943 sc->sc_txpending = 0; 1944 sc->sc_txdirty = 0; 1945 sc->sc_txlast = FXP_NTXCB - 1; 1946 1947 /* 1948 * Initialize the receive buffer list. 1949 */ 1950 sc->sc_rxq.ifq_maxlen = FXP_NRFABUFS; 1951 while (sc->sc_rxq.ifq_len < FXP_NRFABUFS) { 1952 rxmap = FXP_RXMAP_GET(sc); 1953 if ((error = fxp_add_rfabuf(sc, rxmap, 0)) != 0) { 1954 log(LOG_ERR, "%s: unable to allocate or map rx " 1955 "buffer %d, error = %d\n", 1956 device_xname(sc->sc_dev), 1957 sc->sc_rxq.ifq_len, error); 1958 /* 1959 * XXX Should attempt to run with fewer receive 1960 * XXX buffers instead of just failing. 1961 */ 1962 FXP_RXMAP_PUT(sc, rxmap); 1963 fxp_rxdrain(sc); 1964 goto out; 1965 } 1966 } 1967 sc->sc_rxidle = 0; 1968 1969 /* 1970 * Give the transmit ring to the chip. We do this by pointing 1971 * the chip at the last descriptor (which is a NOP|SUSPEND), and 1972 * issuing a start command. It will execute the NOP and then 1973 * suspend, pointing at the first descriptor. 1974 */ 1975 fxp_scb_wait(sc); 1976 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, FXP_CDTXADDR(sc, sc->sc_txlast)); 1977 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 1978 1979 /* 1980 * Initialize receiver buffer area - RFA. 1981 */ 1982#if 0 /* initialization will be done by FXP_SCB_INTRCNTL_REQUEST_SWI later */ 1983 rxmap = M_GETCTX(sc->sc_rxq.ifq_head, bus_dmamap_t); 1984 fxp_scb_wait(sc); 1985 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 1986 rxmap->dm_segs[0].ds_addr + RFA_ALIGNMENT_FUDGE); 1987 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_START); 1988#endif 1989 1990 if (sc->sc_flags & FXPF_MII) { 1991 /* 1992 * Set current media. 1993 */ 1994 if ((error = mii_ifmedia_change(&sc->sc_mii)) != 0) 1995 goto out; 1996 } 1997 1998 /* 1999 * ...all done! 2000 */ 2001 ifp->if_flags |= IFF_RUNNING; 2002 ifp->if_flags &= ~IFF_OACTIVE; 2003 2004 /* 2005 * Request a software generated interrupt that will be used to 2006 * (re)start the RU processing. If we direct the chip to start 2007 * receiving from the start of queue now, instead of letting the 2008 * interrupt handler first process all received packets, we run 2009 * the risk of having it overwrite mbuf clusters while they are 2010 * being processed or after they have been returned to the pool. 2011 */ 2012 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, FXP_SCB_INTRCNTL_REQUEST_SWI); 2013 2014 /* 2015 * Start the one second timer. 2016 */ 2017 callout_reset(&sc->sc_callout, hz, fxp_tick, sc); 2018 2019 /* 2020 * Attempt to start output on the interface. 2021 */ 2022 fxp_start(ifp); 2023 2024 out: 2025 if (error) { 2026 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 2027 ifp->if_timer = 0; 2028 log(LOG_ERR, "%s: interface not running\n", 2029 device_xname(sc->sc_dev)); 2030 } 2031 return (error); 2032} 2033 2034/* 2035 * Notify the world which media we're using. 2036 */ 2037void 2038fxp_mii_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) 2039{ 2040 struct fxp_softc *sc = ifp->if_softc; 2041 2042 if (sc->sc_enabled == 0) { 2043 ifmr->ifm_active = IFM_ETHER | IFM_NONE; 2044 ifmr->ifm_status = 0; 2045 return; 2046 } 2047 2048 ether_mediastatus(ifp, ifmr); 2049} 2050 2051int 2052fxp_80c24_mediachange(struct ifnet *ifp) 2053{ 2054 2055 /* Nothing to do here. */ 2056 return (0); 2057} 2058 2059void 2060fxp_80c24_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) 2061{ 2062 struct fxp_softc *sc = ifp->if_softc; 2063 2064 /* 2065 * Media is currently-selected media. We cannot determine 2066 * the link status. 2067 */ 2068 ifmr->ifm_status = 0; 2069 ifmr->ifm_active = sc->sc_mii.mii_media.ifm_cur->ifm_media; 2070} 2071 2072/* 2073 * Add a buffer to the end of the RFA buffer list. 2074 * Return 0 if successful, error code on failure. 2075 * 2076 * The RFA struct is stuck at the beginning of mbuf cluster and the 2077 * data pointer is fixed up to point just past it. 2078 */ 2079int 2080fxp_add_rfabuf(struct fxp_softc *sc, bus_dmamap_t rxmap, int unload) 2081{ 2082 struct mbuf *m; 2083 int error; 2084 2085 MGETHDR(m, M_DONTWAIT, MT_DATA); 2086 if (m == NULL) 2087 return (ENOBUFS); 2088 2089 MCLAIM(m, &sc->sc_ethercom.ec_rx_mowner); 2090 MCLGET(m, M_DONTWAIT); 2091 if ((m->m_flags & M_EXT) == 0) { 2092 m_freem(m); 2093 return (ENOBUFS); 2094 } 2095 2096 if (unload) 2097 bus_dmamap_unload(sc->sc_dmat, rxmap); 2098 2099 M_SETCTX(m, rxmap); 2100 2101 m->m_len = m->m_pkthdr.len = m->m_ext.ext_size; 2102 error = bus_dmamap_load_mbuf(sc->sc_dmat, rxmap, m, 2103 BUS_DMA_READ|BUS_DMA_NOWAIT); 2104 if (error) { 2105 /* XXX XXX XXX */ 2106 aprint_error_dev(sc->sc_dev, 2107 "can't load rx DMA map %d, error = %d\n", 2108 sc->sc_rxq.ifq_len, error); 2109 panic("fxp_add_rfabuf"); 2110 } 2111 2112 FXP_INIT_RFABUF(sc, m); 2113 2114 return (0); 2115} 2116 2117int 2118fxp_mdi_read(device_t self, int phy, int reg) 2119{ 2120 struct fxp_softc *sc = device_private(self); 2121 int count = 10000; 2122 int value; 2123 2124 CSR_WRITE_4(sc, FXP_CSR_MDICONTROL, 2125 (FXP_MDI_READ << 26) | (reg << 16) | (phy << 21)); 2126 2127 while (((value = CSR_READ_4(sc, FXP_CSR_MDICONTROL)) & 2128 0x10000000) == 0 && count--) 2129 DELAY(10); 2130 2131 if (count <= 0) 2132 log(LOG_WARNING, 2133 "%s: fxp_mdi_read: timed out\n", device_xname(self)); 2134 2135 return (value & 0xffff); 2136} 2137 2138void 2139fxp_statchg(struct ifnet *ifp) 2140{ 2141 2142 /* Nothing to do. */ 2143} 2144 2145void 2146fxp_mdi_write(device_t self, int phy, int reg, int value) 2147{ 2148 struct fxp_softc *sc = device_private(self); 2149 int count = 10000; 2150 2151 CSR_WRITE_4(sc, FXP_CSR_MDICONTROL, 2152 (FXP_MDI_WRITE << 26) | (reg << 16) | (phy << 21) | 2153 (value & 0xffff)); 2154 2155 while ((CSR_READ_4(sc, FXP_CSR_MDICONTROL) & 0x10000000) == 0 && 2156 count--) 2157 DELAY(10); 2158 2159 if (count <= 0) 2160 log(LOG_WARNING, 2161 "%s: fxp_mdi_write: timed out\n", device_xname(self)); 2162} 2163 2164int 2165fxp_ioctl(struct ifnet *ifp, u_long cmd, void *data) 2166{ 2167 struct fxp_softc *sc = ifp->if_softc; 2168 struct ifreq *ifr = (struct ifreq *)data; 2169 int s, error; 2170 2171 s = splnet(); 2172 2173 switch (cmd) { 2174 case SIOCSIFMEDIA: 2175 case SIOCGIFMEDIA: 2176 error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd); 2177 break; 2178 2179 default: 2180 if ((error = ether_ioctl(ifp, cmd, data)) != ENETRESET) 2181 break; 2182 2183 error = 0; 2184 2185 if (cmd != SIOCADDMULTI && cmd != SIOCDELMULTI) 2186 ; 2187 else if (ifp->if_flags & IFF_RUNNING) { 2188 /* 2189 * Multicast list has changed; set the 2190 * hardware filter accordingly. 2191 */ 2192 while (sc->sc_txpending) { 2193 sc->sc_flags |= FXPF_WANTINIT; 2194 tsleep(sc, PSOCK, "fxp_init", 0); 2195 } 2196 error = fxp_init(ifp); 2197 } 2198 break; 2199 } 2200 2201 /* Try to get more packets going. */ 2202 if (sc->sc_enabled) 2203 fxp_start(ifp); 2204 2205 splx(s); 2206 return (error); 2207} 2208 2209/* 2210 * Program the multicast filter. 2211 * 2212 * This function must be called at splnet(). 2213 */ 2214void 2215fxp_mc_setup(struct fxp_softc *sc) 2216{ 2217 struct fxp_cb_mcs *mcsp = &sc->sc_control_data->fcd_mcscb; 2218 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 2219 struct ethercom *ec = &sc->sc_ethercom; 2220 struct ether_multi *enm; 2221 struct ether_multistep step; 2222 int count, nmcasts; 2223 uint16_t status; 2224 2225#ifdef DIAGNOSTIC 2226 if (sc->sc_txpending) 2227 panic("fxp_mc_setup: pending transmissions"); 2228#endif 2229 2230 2231 if (ifp->if_flags & IFF_PROMISC) { 2232 ifp->if_flags |= IFF_ALLMULTI; 2233 return; 2234 } else { 2235 ifp->if_flags &= ~IFF_ALLMULTI; 2236 } 2237 2238 /* 2239 * Initialize multicast setup descriptor. 2240 */ 2241 nmcasts = 0; 2242 ETHER_FIRST_MULTI(step, ec, enm); 2243 while (enm != NULL) { 2244 /* 2245 * Check for too many multicast addresses or if we're 2246 * listening to a range. Either way, we simply have 2247 * to accept all multicasts. 2248 */ 2249 if (nmcasts >= MAXMCADDR || 2250 memcmp(enm->enm_addrlo, enm->enm_addrhi, 2251 ETHER_ADDR_LEN) != 0) { 2252 /* 2253 * Callers of this function must do the 2254 * right thing with this. If we're called 2255 * from outside fxp_init(), the caller must 2256 * detect if the state if IFF_ALLMULTI changes. 2257 * If it does, the caller must then call 2258 * fxp_init(), since allmulti is handled by 2259 * the config block. 2260 */ 2261 ifp->if_flags |= IFF_ALLMULTI; 2262 return; 2263 } 2264 memcpy(&mcsp->mc_addr[nmcasts][0], enm->enm_addrlo, 2265 ETHER_ADDR_LEN); 2266 nmcasts++; 2267 ETHER_NEXT_MULTI(step, enm); 2268 } 2269 2270 /* BIG_ENDIAN: no need to swap to store 0 */ 2271 mcsp->cb_status = 0; 2272 mcsp->cb_command = htole16(FXP_CB_COMMAND_MCAS | FXP_CB_COMMAND_EL); 2273 mcsp->link_addr = htole32(FXP_CDTXADDR(sc, FXP_NEXTTX(sc->sc_txlast))); 2274 mcsp->mc_cnt = htole16(nmcasts * ETHER_ADDR_LEN); 2275 2276 FXP_CDMCSSYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 2277 2278 /* 2279 * Wait until the command unit is not active. This should never 2280 * happen since nothing is queued, but make sure anyway. 2281 */ 2282 count = 100; 2283 while ((CSR_READ_1(sc, FXP_CSR_SCB_RUSCUS) >> 6) == 2284 FXP_SCB_CUS_ACTIVE && --count) 2285 DELAY(1); 2286 if (count == 0) { 2287 log(LOG_WARNING, "%s: line %d: command queue timeout\n", 2288 device_xname(sc->sc_dev), __LINE__); 2289 return; 2290 } 2291 2292 /* 2293 * Start the multicast setup command/DMA. 2294 */ 2295 fxp_scb_wait(sc); 2296 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDMCSOFF); 2297 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 2298 2299 /* ...and wait for it to complete. */ 2300 for (count = 1000; count > 0; count--) { 2301 FXP_CDMCSSYNC(sc, 2302 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 2303 status = le16toh(mcsp->cb_status); 2304 FXP_CDMCSSYNC(sc, BUS_DMASYNC_PREREAD); 2305 if ((status & FXP_CB_STATUS_C) != 0) 2306 break; 2307 DELAY(1); 2308 } 2309 if (count == 0) { 2310 log(LOG_WARNING, "%s: line %d: dmasync timeout\n", 2311 device_xname(sc->sc_dev), __LINE__); 2312 return; 2313 } 2314} 2315 2316static const uint32_t fxp_ucode_d101a[] = D101_A_RCVBUNDLE_UCODE; 2317static const uint32_t fxp_ucode_d101b0[] = D101_B0_RCVBUNDLE_UCODE; 2318static const uint32_t fxp_ucode_d101ma[] = D101M_B_RCVBUNDLE_UCODE; 2319static const uint32_t fxp_ucode_d101s[] = D101S_RCVBUNDLE_UCODE; 2320static const uint32_t fxp_ucode_d102[] = D102_B_RCVBUNDLE_UCODE; 2321static const uint32_t fxp_ucode_d102c[] = D102_C_RCVBUNDLE_UCODE; 2322static const uint32_t fxp_ucode_d102e[] = D102_E_RCVBUNDLE_UCODE; 2323 2324#define UCODE(x) x, sizeof(x)/sizeof(uint32_t) 2325 2326static const struct ucode { 2327 int32_t revision; 2328 const uint32_t *ucode; 2329 size_t length; 2330 uint16_t int_delay_offset; 2331 uint16_t bundle_max_offset; 2332} ucode_table[] = { 2333 { FXP_REV_82558_A4, UCODE(fxp_ucode_d101a), 2334 D101_CPUSAVER_DWORD, 0 }, 2335 2336 { FXP_REV_82558_B0, UCODE(fxp_ucode_d101b0), 2337 D101_CPUSAVER_DWORD, 0 }, 2338 2339 { FXP_REV_82559_A0, UCODE(fxp_ucode_d101ma), 2340 D101M_CPUSAVER_DWORD, D101M_CPUSAVER_BUNDLE_MAX_DWORD }, 2341 2342 { FXP_REV_82559S_A, UCODE(fxp_ucode_d101s), 2343 D101S_CPUSAVER_DWORD, D101S_CPUSAVER_BUNDLE_MAX_DWORD }, 2344 2345 { FXP_REV_82550, UCODE(fxp_ucode_d102), 2346 D102_B_CPUSAVER_DWORD, D102_B_CPUSAVER_BUNDLE_MAX_DWORD }, 2347 2348 { FXP_REV_82550_C, UCODE(fxp_ucode_d102c), 2349 D102_C_CPUSAVER_DWORD, D102_C_CPUSAVER_BUNDLE_MAX_DWORD }, 2350 2351 { FXP_REV_82551_F, UCODE(fxp_ucode_d102e), 2352 D102_E_CPUSAVER_DWORD, D102_E_CPUSAVER_BUNDLE_MAX_DWORD }, 2353 2354 { FXP_REV_82551_10, UCODE(fxp_ucode_d102e), 2355 D102_E_CPUSAVER_DWORD, D102_E_CPUSAVER_BUNDLE_MAX_DWORD }, 2356 2357 { 0, NULL, 0, 0, 0 } 2358}; 2359 2360void 2361fxp_load_ucode(struct fxp_softc *sc) 2362{ 2363 const struct ucode *uc; 2364 struct fxp_cb_ucode *cbp = &sc->sc_control_data->fcd_ucode; 2365 int count, i; 2366 uint16_t status; 2367 2368 if (sc->sc_flags & FXPF_UCODE_LOADED) 2369 return; 2370 2371 /* 2372 * Only load the uCode if the user has requested that 2373 * we do so. 2374 */ 2375 if ((sc->sc_ethercom.ec_if.if_flags & IFF_LINK0) == 0) { 2376 sc->sc_int_delay = 0; 2377 sc->sc_bundle_max = 0; 2378 return; 2379 } 2380 2381 for (uc = ucode_table; uc->ucode != NULL; uc++) { 2382 if (sc->sc_rev == uc->revision) 2383 break; 2384 } 2385 if (uc->ucode == NULL) 2386 return; 2387 2388 /* BIG ENDIAN: no need to swap to store 0 */ 2389 cbp->cb_status = 0; 2390 cbp->cb_command = htole16(FXP_CB_COMMAND_UCODE | FXP_CB_COMMAND_EL); 2391 cbp->link_addr = 0xffffffff; /* (no) next command */ 2392 for (i = 0; i < uc->length; i++) 2393 cbp->ucode[i] = htole32(uc->ucode[i]); 2394 2395 if (uc->int_delay_offset) 2396 *(volatile uint16_t *) &cbp->ucode[uc->int_delay_offset] = 2397 htole16(fxp_int_delay + (fxp_int_delay / 2)); 2398 2399 if (uc->bundle_max_offset) 2400 *(volatile uint16_t *) &cbp->ucode[uc->bundle_max_offset] = 2401 htole16(fxp_bundle_max); 2402 2403 FXP_CDUCODESYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 2404 2405 /* 2406 * Download the uCode to the chip. 2407 */ 2408 fxp_scb_wait(sc); 2409 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->sc_cddma + FXP_CDUCODEOFF); 2410 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START); 2411 2412 /* ...and wait for it to complete. */ 2413 for (count = 10000; count > 0; count--) { 2414 FXP_CDUCODESYNC(sc, 2415 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); 2416 status = le16toh(cbp->cb_status); 2417 FXP_CDUCODESYNC(sc, BUS_DMASYNC_PREREAD); 2418 if ((status & FXP_CB_STATUS_C) != 0) 2419 break; 2420 DELAY(2); 2421 } 2422 if (count == 0) { 2423 sc->sc_int_delay = 0; 2424 sc->sc_bundle_max = 0; 2425 log(LOG_WARNING, "%s: timeout loading microcode\n", 2426 device_xname(sc->sc_dev)); 2427 return; 2428 } 2429 2430 if (sc->sc_int_delay != fxp_int_delay || 2431 sc->sc_bundle_max != fxp_bundle_max) { 2432 sc->sc_int_delay = fxp_int_delay; 2433 sc->sc_bundle_max = fxp_bundle_max; 2434 log(LOG_INFO, "%s: Microcode loaded: int delay: %d usec, " 2435 "max bundle: %d\n", device_xname(sc->sc_dev), 2436 sc->sc_int_delay, 2437 uc->bundle_max_offset == 0 ? 0 : sc->sc_bundle_max); 2438 } 2439 2440 sc->sc_flags |= FXPF_UCODE_LOADED; 2441} 2442 2443int 2444fxp_enable(struct fxp_softc *sc) 2445{ 2446 2447 if (sc->sc_enabled == 0 && sc->sc_enable != NULL) { 2448 if ((*sc->sc_enable)(sc) != 0) { 2449 log(LOG_ERR, "%s: device enable failed\n", 2450 device_xname(sc->sc_dev)); 2451 return (EIO); 2452 } 2453 } 2454 2455 sc->sc_enabled = 1; 2456 return (0); 2457} 2458 2459void 2460fxp_disable(struct fxp_softc *sc) 2461{ 2462 2463 if (sc->sc_enabled != 0 && sc->sc_disable != NULL) { 2464 (*sc->sc_disable)(sc); 2465 sc->sc_enabled = 0; 2466 } 2467} 2468 2469/* 2470 * fxp_activate: 2471 * 2472 * Handle device activation/deactivation requests. 2473 */ 2474int 2475fxp_activate(device_t self, enum devact act) 2476{ 2477 struct fxp_softc *sc = device_private(self); 2478 2479 switch (act) { 2480 case DVACT_DEACTIVATE: 2481 if_deactivate(&sc->sc_ethercom.ec_if); 2482 return 0; 2483 default: 2484 return EOPNOTSUPP; 2485 } 2486} 2487 2488/* 2489 * fxp_detach: 2490 * 2491 * Detach an i82557 interface. 2492 */ 2493int 2494fxp_detach(struct fxp_softc *sc, int flags) 2495{ 2496 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 2497 int i, s; 2498 2499 /* Succeed now if there's no work to do. */ 2500 if ((sc->sc_flags & FXPF_ATTACHED) == 0) 2501 return (0); 2502 2503 s = splnet(); 2504 /* Stop the interface. Callouts are stopped in it. */ 2505 fxp_stop(ifp, 1); 2506 splx(s); 2507 2508 /* Destroy our callout. */ 2509 callout_destroy(&sc->sc_callout); 2510 2511 if (sc->sc_flags & FXPF_MII) { 2512 /* Detach all PHYs */ 2513 mii_detach(&sc->sc_mii, MII_PHY_ANY, MII_OFFSET_ANY); 2514 } 2515 2516 /* Delete all remaining media. */ 2517 ifmedia_delete_instance(&sc->sc_mii.mii_media, IFM_INST_ANY); 2518 2519 rnd_detach_source(&sc->rnd_source); 2520 ether_ifdetach(ifp); 2521 if_detach(ifp); 2522 2523 for (i = 0; i < FXP_NRFABUFS; i++) { 2524 bus_dmamap_unload(sc->sc_dmat, sc->sc_rxmaps[i]); 2525 bus_dmamap_destroy(sc->sc_dmat, sc->sc_rxmaps[i]); 2526 } 2527 2528 for (i = 0; i < FXP_NTXCB; i++) { 2529 bus_dmamap_unload(sc->sc_dmat, FXP_DSTX(sc, i)->txs_dmamap); 2530 bus_dmamap_destroy(sc->sc_dmat, FXP_DSTX(sc, i)->txs_dmamap); 2531 } 2532 2533 bus_dmamap_unload(sc->sc_dmat, sc->sc_dmamap); 2534 bus_dmamap_destroy(sc->sc_dmat, sc->sc_dmamap); 2535 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data, 2536 sizeof(struct fxp_control_data)); 2537 bus_dmamem_free(sc->sc_dmat, &sc->sc_cdseg, sc->sc_cdnseg); 2538 2539 return (0); 2540} 2541