1/* $NetBSD: aic79xx.c,v 1.70 2024/02/02 22:39:10 andvar Exp $ */ 2 3/* 4 * Core routines and tables shareable across OS platforms. 5 * 6 * Copyright (c) 1994-2002 Justin T. Gibbs. 7 * Copyright (c) 2000-2003 Adaptec Inc. 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions, and the following disclaimer, 15 * without modification. 16 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 17 * substantially similar to the "NO WARRANTY" disclaimer below 18 * ("Disclaimer") and any redistribution must be conditioned upon 19 * including a substantially similar Disclaimer requirement for further 20 * binary redistribution. 21 * 3. Neither the names of the above-listed copyright holders nor the names 22 * of any contributors may be used to endorse or promote products derived 23 * from this software without specific prior written permission. 24 * 25 * Alternatively, this software may be distributed under the terms of the 26 * GNU General Public License ("GPL") version 2 as published by the Free 27 * Software Foundation. 28 * 29 * NO WARRANTY 30 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 31 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 32 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 33 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 34 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 35 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 36 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 37 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 38 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 39 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 40 * POSSIBILITY OF SUCH DAMAGES. 41 * 42 * Id: //depot/aic7xxx/aic7xxx/aic79xx.c#202 $ 43 * 44 * $FreeBSD: src/sys/dev/aic7xxx/aic79xx.c,v 1.24 2003/06/28 04:46:54 gibbs Exp $ 45 */ 46/* 47 * Ported from FreeBSD by Pascal Renauld, Network Storage Solutions, Inc. 48 * - April 2003 49 */ 50 51#include <sys/cdefs.h> 52__KERNEL_RCSID(0, "$NetBSD: aic79xx.c,v 1.70 2024/02/02 22:39:10 andvar Exp $"); 53 54#include <dev/ic/aic79xx_osm.h> 55#include <dev/ic/aic79xx_inline.h> 56#include <dev/ic/aic7xxx_cam.h> 57 58#include <dev/microcode/aic7xxx/aicasm.h> 59#include <dev/microcode/aic7xxx/aicasm_insformat.h> 60 61 62/******************************** Globals *************************************/ 63struct ahd_softc_tailq ahd_tailq = TAILQ_HEAD_INITIALIZER(ahd_tailq); 64 65/***************************** Lookup Tables **********************************/ 66const char * const ahd_chip_names[] = 67{ 68 "NONE", 69 "aic7901", 70 "aic7902", 71 "aic7901A" 72}; 73 74/* 75 * Hardware error codes. 76 */ 77struct ahd_hard_error_entry { 78 uint8_t errno; 79 const char *errmesg; 80}; 81 82static struct ahd_hard_error_entry ahd_hard_errors[] = { 83 { DSCTMOUT, "Discard Timer has timed out" }, 84 { ILLOPCODE, "Illegal Opcode in sequencer program" }, 85 { SQPARERR, "Sequencer Parity Error" }, 86 { DPARERR, "Data-path Parity Error" }, 87 { MPARERR, "Scratch or SCB Memory Parity Error" }, 88 { CIOPARERR, "CIOBUS Parity Error" }, 89}; 90static const u_int num_errors = NUM_ELEMENTS(ahd_hard_errors); 91 92static struct ahd_phase_table_entry ahd_phase_table[] = 93{ 94 { P_DATAOUT, MSG_NOOP, "in Data-out phase" }, 95 { P_DATAIN, MSG_INITIATOR_DET_ERR, "in Data-in phase" }, 96 { P_DATAOUT_DT, MSG_NOOP, "in DT Data-out phase" }, 97 { P_DATAIN_DT, MSG_INITIATOR_DET_ERR, "in DT Data-in phase" }, 98 { P_COMMAND, MSG_NOOP, "in Command phase" }, 99 { P_MESGOUT, MSG_NOOP, "in Message-out phase" }, 100 { P_STATUS, MSG_INITIATOR_DET_ERR, "in Status phase" }, 101 { P_MESGIN, MSG_PARITY_ERROR, "in Message-in phase" }, 102 { P_BUSFREE, MSG_NOOP, "while idle" }, 103 { 0, MSG_NOOP, "in unknown phase" } 104}; 105 106/* 107 * In most cases we only wish to iterate over real phases, so 108 * exclude the last element from the count. 109 */ 110static const u_int num_phases = NUM_ELEMENTS(ahd_phase_table) - 1; 111 112/* Our Sequencer Program */ 113#include <dev/microcode/aic7xxx/aic79xx_seq.h> 114 115/**************************** Function Declarations ***************************/ 116static void ahd_handle_transmission_error(struct ahd_softc *ahd); 117static void ahd_handle_lqiphase_error(struct ahd_softc *ahd, 118 u_int lqistat1); 119static int ahd_handle_pkt_busfree(struct ahd_softc *ahd, 120 u_int busfreetime); 121static int ahd_handle_nonpkt_busfree(struct ahd_softc *ahd); 122static void ahd_handle_proto_violation(struct ahd_softc *ahd); 123static void ahd_force_renegotiation(struct ahd_softc *ahd, 124 struct ahd_devinfo *devinfo); 125 126static struct ahd_tmode_tstate* 127 ahd_alloc_tstate(struct ahd_softc *ahd, 128 u_int scsi_id, char channel); 129#ifdef AHD_TARGET_MODE 130static void ahd_free_tstate(struct ahd_softc *ahd, 131 u_int scsi_id, char channel, int force); 132#endif 133static void ahd_devlimited_syncrate(struct ahd_softc *ahd, 134 struct ahd_initiator_tinfo *, 135 u_int *period, 136 u_int *ppr_options, 137 role_t role); 138static void ahd_update_neg_table(struct ahd_softc *ahd, 139 struct ahd_devinfo *devinfo, 140 struct ahd_transinfo *tinfo); 141static void ahd_update_pending_scbs(struct ahd_softc *ahd); 142static void ahd_fetch_devinfo(struct ahd_softc *ahd, 143 struct ahd_devinfo *devinfo); 144static void ahd_scb_devinfo(struct ahd_softc *ahd, 145 struct ahd_devinfo *devinfo, 146 struct scb *scb); 147static void ahd_setup_initiator_msgout(struct ahd_softc *ahd, 148 struct ahd_devinfo *devinfo, 149 struct scb *scb); 150static void ahd_build_transfer_msg(struct ahd_softc *ahd, 151 struct ahd_devinfo *devinfo); 152static void ahd_construct_sdtr(struct ahd_softc *ahd, 153 struct ahd_devinfo *devinfo, 154 u_int period, u_int offset); 155static void ahd_construct_wdtr(struct ahd_softc *ahd, 156 struct ahd_devinfo *devinfo, 157 u_int bus_width); 158static void ahd_construct_ppr(struct ahd_softc *ahd, 159 struct ahd_devinfo *devinfo, 160 u_int period, u_int offset, 161 u_int bus_width, u_int ppr_options); 162static void ahd_clear_msg_state(struct ahd_softc *ahd); 163static void ahd_handle_message_phase(struct ahd_softc *ahd); 164typedef enum { 165 AHDMSG_1B, 166 AHDMSG_2B, 167 AHDMSG_EXT 168} ahd_msgtype; 169static int ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, 170 u_int msgval, int full); 171static int ahd_parse_msg(struct ahd_softc *ahd, 172 struct ahd_devinfo *devinfo); 173static int ahd_handle_msg_reject(struct ahd_softc *ahd, 174 struct ahd_devinfo *devinfo); 175static void ahd_handle_ign_wide_residue(struct ahd_softc *ahd, 176 struct ahd_devinfo *devinfo); 177static void ahd_reinitialize_dataptrs(struct ahd_softc *ahd); 178static void ahd_handle_devreset(struct ahd_softc *ahd, 179 struct ahd_devinfo *devinfo, 180 u_int lun, cam_status status, 181 const char *message, 182 int verbose_level); 183#if AHD_TARGET_MODE 184static void ahd_setup_target_msgin(struct ahd_softc *ahd, 185 struct ahd_devinfo *devinfo, 186 struct scb *scb); 187#endif 188 189static u_int ahd_sglist_size(struct ahd_softc *ahd); 190static u_int ahd_sglist_allocsize(struct ahd_softc *ahd); 191static void ahd_initialize_hscbs(struct ahd_softc *ahd); 192static int ahd_init_scbdata(struct ahd_softc *ahd); 193static void ahd_fini_scbdata(struct ahd_softc *ahd); 194static void ahd_setup_iocell_workaround(struct ahd_softc *ahd); 195static void ahd_iocell_first_selection(struct ahd_softc *ahd); 196static void ahd_add_col_list(struct ahd_softc *ahd, 197 struct scb *scb, u_int col_idx); 198static void ahd_rem_col_list(struct ahd_softc *ahd, 199 struct scb *scb); 200static void ahd_chip_init(struct ahd_softc *ahd); 201static void ahd_qinfifo_requeue(struct ahd_softc *ahd, 202 struct scb *prev_scb, 203 struct scb *scb); 204static int ahd_qinfifo_count(struct ahd_softc *ahd); 205static int ahd_search_scb_list(struct ahd_softc *ahd, int target, 206 char channel, int lun, u_int tag, 207 role_t role, uint32_t status, 208 ahd_search_action action, 209 u_int *list_head, u_int tid); 210static void ahd_stitch_tid_list(struct ahd_softc *ahd, 211 u_int tid_prev, u_int tid_cur, 212 u_int tid_next); 213static void ahd_add_scb_to_free_list(struct ahd_softc *ahd, 214 u_int scbid); 215static u_int ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid, 216 u_int prev, u_int next, u_int tid); 217static void ahd_reset_current_bus(struct ahd_softc *ahd); 218static ahd_callback_t ahd_reset_poll; 219static ahd_callback_t ahd_stat_timer; 220#ifdef AHD_DUMP_SEQ 221static void ahd_dumpseq(struct ahd_softc *ahd); 222#endif 223static void ahd_loadseq(struct ahd_softc *ahd); 224static int ahd_check_patch(struct ahd_softc *ahd, 225 const struct patch **start_patch, 226 u_int start_instr, u_int *skip_addr); 227static u_int ahd_resolve_seqaddr(struct ahd_softc *ahd, 228 u_int address); 229static void ahd_download_instr(struct ahd_softc *ahd, 230 u_int instrptr, uint8_t *dconsts); 231static int ahd_probe_stack_size(struct ahd_softc *ahd); 232static int ahd_scb_active_in_fifo(struct ahd_softc *ahd, 233 struct scb *scb); 234static void ahd_run_data_fifo(struct ahd_softc *ahd, 235 struct scb *scb); 236 237#ifdef AHD_TARGET_MODE 238static void ahd_queue_lstate_event(struct ahd_softc *ahd, 239 struct ahd_tmode_lstate *lstate, 240 u_int initiator_id, 241 u_int event_type, 242 u_int event_arg); 243static void ahd_update_scsiid(struct ahd_softc *ahd, 244 u_int targid_mask); 245static int ahd_handle_target_cmd(struct ahd_softc *ahd, 246 struct target_cmd *cmd); 247#endif 248 249/************************** Added for porting to NetBSD ***********************/ 250static int ahd_createdmamem(bus_dma_tag_t tag, 251 int size, 252 int flags, 253 bus_dmamap_t *mapp, 254 void **vaddr, 255 bus_addr_t *baddr, 256 bus_dma_segment_t *seg, 257 int *nseg, 258 const char *myname, const char *what); 259 260static void ahd_freedmamem(bus_dma_tag_t tag, 261 int size, 262 bus_dmamap_t map, 263 void *vaddr, 264 bus_dma_segment_t *seg, 265 int nseg); 266 267/******************************** Private Inlines *****************************/ 268static inline void ahd_assert_atn(struct ahd_softc *ahd); 269static inline int ahd_currently_packetized(struct ahd_softc *ahd); 270static inline int ahd_set_active_fifo(struct ahd_softc *ahd); 271 272static inline void 273ahd_assert_atn(struct ahd_softc *ahd) 274{ 275 ahd_outb(ahd, SCSISIGO, ATNO); 276} 277 278/* 279 * Determine if the current connection has a packetized 280 * agreement. This does not necessarily mean that we 281 * are currently in a packetized transfer. We could 282 * just as easily be sending or receiving a message. 283 */ 284static inline int 285ahd_currently_packetized(struct ahd_softc *ahd) 286{ 287 ahd_mode_state saved_modes; 288 int packetized; 289 290 saved_modes = ahd_save_modes(ahd); 291 if ((ahd->bugs & AHD_PKTIZED_STATUS_BUG) != 0) { 292 /* 293 * The packetized bit refers to the last 294 * connection, not the current one. Check 295 * for non-zero LQISTATE instead. 296 */ 297 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 298 packetized = ahd_inb(ahd, LQISTATE) != 0; 299 } else { 300 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 301 packetized = ahd_inb(ahd, LQISTAT2) & PACKETIZED; 302 } 303 ahd_restore_modes(ahd, saved_modes); 304 return (packetized); 305} 306 307static inline int 308ahd_set_active_fifo(struct ahd_softc *ahd) 309{ 310 u_int active_fifo; 311 312 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 313 active_fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO; 314 switch (active_fifo) { 315 case 0: 316 case 1: 317 ahd_set_modes(ahd, active_fifo, active_fifo); 318 return (1); 319 default: 320 return (0); 321 } 322} 323 324/************************* Sequencer Execution Control ************************/ 325/* 326 * Restart the sequencer program from address zero 327 */ 328void 329ahd_restart(struct ahd_softc *ahd) 330{ 331 332 ahd_pause(ahd); 333 334 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 335 336 /* No more pending messages */ 337 ahd_clear_msg_state(ahd); 338 ahd_outb(ahd, SCSISIGO, 0); /* De-assert BSY */ 339 ahd_outb(ahd, MSG_OUT, MSG_NOOP); /* No message to send */ 340 ahd_outb(ahd, SXFRCTL1, ahd_inb(ahd, SXFRCTL1) & ~BITBUCKET); 341 ahd_outb(ahd, SEQINTCTL, 0); 342 ahd_outb(ahd, LASTPHASE, P_BUSFREE); 343 ahd_outb(ahd, SEQ_FLAGS, 0); 344 ahd_outb(ahd, SAVED_SCSIID, 0xFF); 345 ahd_outb(ahd, SAVED_LUN, 0xFF); 346 347 /* 348 * Ensure that the sequencer's idea of TQINPOS 349 * matches our own. The sequencer increments TQINPOS 350 * only after it sees a DMA complete and a reset could 351 * occur before the increment leaving the kernel to believe 352 * the command arrived but the sequencer to not. 353 */ 354 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext); 355 356 /* Always allow reselection */ 357 ahd_outb(ahd, SCSISEQ1, 358 ahd_inb(ahd, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP)); 359 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 360 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET); 361 ahd_unpause(ahd); 362} 363 364void 365ahd_clear_fifo(struct ahd_softc *ahd, u_int fifo) 366{ 367 ahd_mode_state saved_modes; 368 369#ifdef AHD_DEBUG 370 if ((ahd_debug & AHD_SHOW_FIFOS) != 0) 371 printf("%s: Clearing FIFO %d\n", ahd_name(ahd), fifo); 372#endif 373 saved_modes = ahd_save_modes(ahd); 374 ahd_set_modes(ahd, fifo, fifo); 375 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT); 376 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) 377 ahd_outb(ahd, CCSGCTL, CCSGRESET); 378 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 379 ahd_outb(ahd, SG_STATE, 0); 380 ahd_restore_modes(ahd, saved_modes); 381} 382 383/************************* Input/Output Queues ********************************/ 384/* 385 * Flush and completed commands that are sitting in the command 386 * complete queues down on the chip but have yet to be DMA'ed back up. 387 */ 388void 389ahd_flush_qoutfifo(struct ahd_softc *ahd) 390{ 391 struct scb *scb; 392 ahd_mode_state saved_modes; 393 u_int saved_scbptr; 394 u_int ccscbctl; 395 u_int scbid; 396 u_int next_scbid; 397 398 saved_modes = ahd_save_modes(ahd); 399 400 /* 401 * Complete any SCBs that just finished being 402 * DMA'ed into the qoutfifo. 403 */ 404 ahd_run_qoutfifo(ahd); 405 406 /* 407 * Flush the good status FIFO for completed packetized commands. 408 */ 409 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 410 saved_scbptr = ahd_get_scbptr(ahd); 411 while ((ahd_inb(ahd, LQISTAT2) & LQIGSAVAIL) != 0) { 412 u_int fifo_mode; 413 u_int i; 414 415 scbid = (ahd_inb(ahd, GSFIFO+1) << 8) 416 | ahd_inb(ahd, GSFIFO); 417 scb = ahd_lookup_scb(ahd, scbid); 418 if (scb == NULL) { 419 printf("%s: Warning - GSFIFO SCB %d invalid\n", 420 ahd_name(ahd), scbid); 421 continue; 422 } 423 /* 424 * Determine if this transaction is still active in 425 * any FIFO. If it is, we must flush that FIFO to 426 * the host before completing the command. 427 */ 428 fifo_mode = 0; 429 for (i = 0; i < 2; i++) { 430 /* Toggle to the other mode. */ 431 fifo_mode ^= 1; 432 ahd_set_modes(ahd, fifo_mode, fifo_mode); 433 if (ahd_scb_active_in_fifo(ahd, scb) == 0) 434 continue; 435 436 ahd_run_data_fifo(ahd, scb); 437 438 /* 439 * Clearing this transaction in this FIFO may 440 * cause a CFG4DATA for this same transaction 441 * to assert in the other FIFO. Make sure we 442 * loop one more time and check the other FIFO. 443 */ 444 i = 0; 445 } 446 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 447 ahd_set_scbptr(ahd, scbid); 448 if ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_LIST_NULL) == 0 449 && ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_FULL_RESID) != 0 450 || (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR) 451 & SG_LIST_NULL) != 0)) { 452 u_int comp_head; 453 454 /* 455 * The transfer completed with a residual. 456 * Place this SCB on the complete DMA list 457 * so that we Update our in-core copy of the 458 * SCB before completing the command. 459 */ 460 ahd_outb(ahd, SCB_SCSI_STATUS, 0); 461 ahd_outb(ahd, SCB_SGPTR, 462 ahd_inb_scbram(ahd, SCB_SGPTR) 463 | SG_STATUS_VALID); 464 ahd_outw(ahd, SCB_TAG, SCB_GET_TAG(scb)); 465 comp_head = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 466 ahd_outw(ahd, SCB_NEXT_COMPLETE, comp_head); 467 if (SCBID_IS_NULL(comp_head)) 468 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, 469 SCB_GET_TAG(scb)); 470 } else 471 ahd_complete_scb(ahd, scb); 472 } 473 ahd_set_scbptr(ahd, saved_scbptr); 474 475 /* 476 * Setup for command channel portion of flush. 477 */ 478 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 479 480 /* 481 * Wait for any inprogress DMA to complete and clear DMA state 482 * if this if for an SCB in the qinfifo. 483 */ 484 while (((ccscbctl = ahd_inb(ahd, CCSCBCTL)) & (CCARREN|CCSCBEN)) != 0) { 485 486 if ((ccscbctl & (CCSCBDIR|CCARREN)) == (CCSCBDIR|CCARREN)) { 487 if ((ccscbctl & ARRDONE) != 0) 488 break; 489 } else if ((ccscbctl & CCSCBDONE) != 0) 490 break; 491 ahd_delay(200); 492 } 493 if ((ccscbctl & CCSCBDIR) != 0) 494 ahd_outb(ahd, CCSCBCTL, ccscbctl & ~(CCARREN|CCSCBEN)); 495 496 saved_scbptr = ahd_get_scbptr(ahd); 497 /* 498 * Manually update/complete any completed SCBs that are waiting to be 499 * DMA'ed back up to the host. 500 */ 501 scbid = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 502 while (!SCBID_IS_NULL(scbid)) { 503 uint8_t *hscb_ptr; 504 u_int i; 505 506 ahd_set_scbptr(ahd, scbid); 507 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 508 scb = ahd_lookup_scb(ahd, scbid); 509 if (scb == NULL) { 510 printf("%s: Warning - DMA-up and complete " 511 "SCB %d invalid\n", ahd_name(ahd), scbid); 512 continue; 513 } 514 hscb_ptr = (uint8_t *)scb->hscb; 515 for (i = 0; i < sizeof(struct hardware_scb); i++) 516 *hscb_ptr++ = ahd_inb_scbram(ahd, SCB_BASE + i); 517 518 ahd_complete_scb(ahd, scb); 519 scbid = next_scbid; 520 } 521 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL); 522 523 scbid = ahd_inw(ahd, COMPLETE_SCB_HEAD); 524 while (!SCBID_IS_NULL(scbid)) { 525 526 ahd_set_scbptr(ahd, scbid); 527 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 528 scb = ahd_lookup_scb(ahd, scbid); 529 if (scb == NULL) { 530 printf("%s: Warning - Complete SCB %d invalid\n", 531 ahd_name(ahd), scbid); 532 continue; 533 } 534 535 ahd_complete_scb(ahd, scb); 536 scbid = next_scbid; 537 } 538 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL); 539 540 /* 541 * Restore state. 542 */ 543 ahd_set_scbptr(ahd, saved_scbptr); 544 ahd_restore_modes(ahd, saved_modes); 545 ahd->flags |= AHD_UPDATE_PEND_CMDS; 546} 547 548/* 549 * Determine if an SCB for a packetized transaction 550 * is active in a FIFO. 551 */ 552static int 553ahd_scb_active_in_fifo(struct ahd_softc *ahd, struct scb *scb) 554{ 555 556 /* 557 * The FIFO is only active for our transaction if 558 * the SCBPTR matches the SCB's ID and the firmware 559 * has installed a handler for the FIFO or we have 560 * a pending SAVEPTRS or CFG4DATA interrupt. 561 */ 562 if (ahd_get_scbptr(ahd) != SCB_GET_TAG(scb) 563 || ((ahd_inb(ahd, LONGJMP_ADDR+1) & INVALID_ADDR) != 0 564 && (ahd_inb(ahd, SEQINTSRC) & (CFG4DATA|SAVEPTRS)) == 0)) 565 return (0); 566 567 return (1); 568} 569 570/* 571 * Run a data fifo to completion for a transaction we know 572 * has completed across the SCSI bus (good status has been 573 * received). We are already set to the correct FIFO mode 574 * on entry to this routine. 575 * 576 * This function attempts to operate exactly as the firmware 577 * would when running this FIFO. Care must be taken to update 578 * this routine any time the firmware's FIFO algorithm is 579 * changed. 580 */ 581static void 582ahd_run_data_fifo(struct ahd_softc *ahd, struct scb *scb) 583{ 584 u_int seqintsrc; 585 586 while (1) { 587 seqintsrc = ahd_inb(ahd, SEQINTSRC); 588 if ((seqintsrc & CFG4DATA) != 0) { 589 uint32_t datacnt; 590 uint32_t sgptr; 591 592 /* 593 * Clear full residual flag. 594 */ 595 sgptr = ahd_inl_scbram(ahd, SCB_SGPTR) & ~SG_FULL_RESID; 596 ahd_outb(ahd, SCB_SGPTR, sgptr); 597 598 /* 599 * Load datacnt and address. 600 */ 601 datacnt = ahd_inl_scbram(ahd, SCB_DATACNT); 602 if ((datacnt & AHD_DMA_LAST_SEG) != 0) { 603 sgptr |= LAST_SEG; 604 ahd_outb(ahd, SG_STATE, 0); 605 } else 606 ahd_outb(ahd, SG_STATE, LOADING_NEEDED); 607 ahd_outq(ahd, HADDR, ahd_inq_scbram(ahd, SCB_DATAPTR)); 608 ahd_outl(ahd, HCNT, datacnt & AHD_SG_LEN_MASK); 609 ahd_outb(ahd, SG_CACHE_PRE, sgptr); 610 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN); 611 612 /* 613 * Initialize Residual Fields. 614 */ 615 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, datacnt >> 24); 616 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr & SG_PTR_MASK); 617 618 /* 619 * Mark the SCB as having a FIFO in use. 620 */ 621 ahd_outb(ahd, SCB_FIFO_USE_COUNT, 622 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) + 1); 623 624 /* 625 * Install a "fake" handler for this FIFO. 626 */ 627 ahd_outw(ahd, LONGJMP_ADDR, 0); 628 629 /* 630 * Notify the hardware that we have satisfied 631 * this sequencer interrupt. 632 */ 633 ahd_outb(ahd, CLRSEQINTSRC, CLRCFG4DATA); 634 } else if ((seqintsrc & SAVEPTRS) != 0) { 635 uint32_t sgptr; 636 uint32_t resid; 637 638 if ((ahd_inb(ahd, LONGJMP_ADDR+1)&INVALID_ADDR) != 0) { 639 /* 640 * Snapshot Save Pointers. Clear 641 * the snapshot and continue. 642 */ 643 ahd_outb(ahd, DFFSXFRCTL, CLRCHN); 644 continue; 645 } 646 647 /* 648 * Disable S/G fetch so the DMA engine 649 * is available to future users. 650 */ 651 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) 652 ahd_outb(ahd, CCSGCTL, 0); 653 ahd_outb(ahd, SG_STATE, 0); 654 655 /* 656 * Flush the data FIFO. Strictly only 657 * necessary for Rev A parts. 658 */ 659 ahd_outb(ahd, DFCNTRL, 660 ahd_inb(ahd, DFCNTRL) | FIFOFLUSH); 661 662 /* 663 * Calculate residual. 664 */ 665 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 666 resid = ahd_inl(ahd, SHCNT); 667 resid |= 668 ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT+3) << 24; 669 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, resid); 670 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG) == 0) { 671 /* 672 * Must back up to the correct S/G element. 673 * Typically this just means resetting our 674 * low byte to the offset in the SG_CACHE, 675 * but if we wrapped, we have to correct 676 * the other bytes of the sgptr too. 677 */ 678 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & 0x80) != 0 679 && (sgptr & 0x80) == 0) 680 sgptr -= 0x100; 681 sgptr &= ~0xFF; 682 sgptr |= ahd_inb(ahd, SG_CACHE_SHADOW) 683 & SG_ADDR_MASK; 684 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 685 ahd_outb(ahd, SCB_RESIDUAL_DATACNT + 3, 0); 686 } else if ((resid & AHD_SG_LEN_MASK) == 0) { 687 ahd_outb(ahd, SCB_RESIDUAL_SGPTR, 688 sgptr | SG_LIST_NULL); 689 } 690 /* 691 * Save Pointers. 692 */ 693 ahd_outq(ahd, SCB_DATAPTR, ahd_inq(ahd, SHADDR)); 694 ahd_outl(ahd, SCB_DATACNT, resid); 695 ahd_outl(ahd, SCB_SGPTR, sgptr); 696 ahd_outb(ahd, CLRSEQINTSRC, CLRSAVEPTRS); 697 ahd_outb(ahd, SEQIMODE, 698 ahd_inb(ahd, SEQIMODE) | ENSAVEPTRS); 699 /* 700 * If the data is to the SCSI bus, we are 701 * done, otherwise wait for FIFOEMP. 702 */ 703 if ((ahd_inb(ahd, DFCNTRL) & DIRECTION) != 0) 704 break; 705 } else if ((ahd_inb(ahd, SG_STATE) & LOADING_NEEDED) != 0) { 706 uint32_t sgptr; 707 uint64_t data_addr; 708 uint32_t data_len; 709 u_int dfcntrl; 710 711 /* 712 * Disable S/G fetch so the DMA engine 713 * is available to future users. 714 */ 715 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) { 716 ahd_outb(ahd, CCSGCTL, 0); 717 ahd_outb(ahd, SG_STATE, LOADING_NEEDED); 718 } 719 720 /* 721 * Wait for the DMA engine to notice that the 722 * host transfer is enabled and that there is 723 * space in the S/G FIFO for new segments before 724 * loading more segments. 725 */ 726 if ((ahd_inb(ahd, DFSTATUS) & PRELOAD_AVAIL) == 0) 727 continue; 728 if ((ahd_inb(ahd, DFCNTRL) & HDMAENACK) == 0) 729 continue; 730 731 /* 732 * Determine the offset of the next S/G 733 * element to load. 734 */ 735 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 736 sgptr &= SG_PTR_MASK; 737 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 738 struct ahd_dma64_seg *sg; 739 740 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 741 data_addr = sg->addr; 742 data_len = sg->len; 743 sgptr += sizeof(*sg); 744 } else { 745 struct ahd_dma_seg *sg; 746 747 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 748 data_addr = sg->len & AHD_SG_HIGH_ADDR_MASK; 749 data_addr <<= 8; 750 data_addr |= sg->addr; 751 data_len = sg->len; 752 sgptr += sizeof(*sg); 753 } 754 755 /* 756 * Update residual information. 757 */ 758 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, data_len >> 24); 759 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 760 761 /* 762 * Load the S/G. 763 */ 764 if (data_len & AHD_DMA_LAST_SEG) { 765 sgptr |= LAST_SEG; 766 ahd_outb(ahd, SG_STATE, 0); 767 } 768 ahd_outq(ahd, HADDR, data_addr); 769 ahd_outl(ahd, HCNT, data_len & AHD_SG_LEN_MASK); 770 ahd_outb(ahd, SG_CACHE_PRE, sgptr & 0xFF); 771 772 /* 773 * Advertise the segment to the hardware. 774 */ 775 dfcntrl = ahd_inb(ahd, DFCNTRL)|PRELOADEN|HDMAEN; 776 if ((ahd->features & AHD_NEW_DFCNTRL_OPTS)!=0) { 777 /* 778 * Use SCSIENWRDIS so that SCSIEN 779 * is never modified by this 780 * operation. 781 */ 782 dfcntrl |= SCSIENWRDIS; 783 } 784 ahd_outb(ahd, DFCNTRL, dfcntrl); 785 } else if ((ahd_inb(ahd, SG_CACHE_SHADOW) 786 & LAST_SEG_DONE) != 0) { 787 788 /* 789 * Transfer completed to the end of SG list 790 * and has flushed to the host. 791 */ 792 ahd_outb(ahd, SCB_SGPTR, 793 ahd_inb_scbram(ahd, SCB_SGPTR) | SG_LIST_NULL); 794 break; 795 } else if ((ahd_inb(ahd, DFSTATUS) & FIFOEMP) != 0) { 796 break; 797 } 798 ahd_delay(200); 799 } 800 /* 801 * Clear any handler for this FIFO, decrement 802 * the FIFO use count for the SCB, and release 803 * the FIFO. 804 */ 805 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 806 ahd_outb(ahd, SCB_FIFO_USE_COUNT, 807 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) - 1); 808 ahd_outb(ahd, DFFSXFRCTL, CLRCHN); 809} 810 811void 812ahd_run_qoutfifo(struct ahd_softc *ahd) 813{ 814 struct scb *scb; 815 u_int scb_index; 816 817 if ((ahd->flags & AHD_RUNNING_QOUTFIFO) != 0) 818 panic("ahd_run_qoutfifo recursion"); 819 ahd->flags |= AHD_RUNNING_QOUTFIFO; 820 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_POSTREAD); 821 while ((ahd->qoutfifo[ahd->qoutfifonext] 822 & QOUTFIFO_ENTRY_VALID_LE) == ahd->qoutfifonext_valid_tag) { 823 824 scb_index = ahd_le16toh(ahd->qoutfifo[ahd->qoutfifonext] 825 & ~QOUTFIFO_ENTRY_VALID_LE); 826 scb = ahd_lookup_scb(ahd, scb_index); 827 if (scb == NULL) { 828 printf("%s: WARNING no command for scb %d " 829 "(cmdcmplt)\nQOUTPOS = %d\n", 830 ahd_name(ahd), scb_index, 831 ahd->qoutfifonext); 832 ahd_dump_card_state(ahd); 833 } else 834 ahd_complete_scb(ahd, scb); 835 836 ahd->qoutfifonext = (ahd->qoutfifonext+1) & (AHD_QOUT_SIZE-1); 837 if (ahd->qoutfifonext == 0) 838 ahd->qoutfifonext_valid_tag ^= QOUTFIFO_ENTRY_VALID_LE; 839 } 840 ahd->flags &= ~AHD_RUNNING_QOUTFIFO; 841} 842 843/************************* Interrupt Handling *********************************/ 844void 845ahd_handle_hwerrint(struct ahd_softc *ahd) 846{ 847 /* 848 * Some catastrophic hardware error has occurred. 849 * Print it for the user and disable the controller. 850 */ 851 int i; 852 int error; 853 854 error = ahd_inb(ahd, ERROR); 855 for (i = 0; i < num_errors; i++) { 856 if ((error & ahd_hard_errors[i].errno) != 0) 857 printf("%s: hwerrint, %s\n", 858 ahd_name(ahd), ahd_hard_errors[i].errmesg); 859 } 860 861 ahd_dump_card_state(ahd); 862 panic("BRKADRINT"); 863 864 /* Tell everyone that this HBA is no longer available */ 865 ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS, 866 CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN, 867 CAM_NO_HBA); 868 869 /* Tell the system that this controller has gone away. */ 870 ahd_free(ahd); 871} 872 873void 874ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat) 875{ 876 u_int seqintcode; 877 878 /* 879 * Save the sequencer interrupt code and clear the SEQINT 880 * bit. We will unpause the sequencer, if appropriate, 881 * after servicing the request. 882 */ 883 seqintcode = ahd_inb(ahd, SEQINTCODE); 884 ahd_outb(ahd, CLRINT, CLRSEQINT); 885 if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) { 886 /* 887 * Unpause the sequencer and let it clear 888 * SEQINT by writing NO_SEQINT to it. This 889 * will cause the sequencer to be paused again, 890 * which is the expected state of this routine. 891 */ 892 ahd_unpause(ahd); 893 while (!ahd_is_paused(ahd)) 894 ; 895 ahd_outb(ahd, CLRINT, CLRSEQINT); 896 } 897 ahd_update_modes(ahd); 898#ifdef AHD_DEBUG 899 if ((ahd_debug & AHD_SHOW_MISC) != 0) 900 printf("%s: Handle Seqint Called for code %d\n", 901 ahd_name(ahd), seqintcode); 902#endif 903 switch (seqintcode) { 904 case BAD_SCB_STATUS: 905 { 906 struct scb *scb; 907 u_int scbid; 908 int cmds_pending; 909 910 scbid = ahd_get_scbptr(ahd); 911 scb = ahd_lookup_scb(ahd, scbid); 912 if (scb != NULL) { 913 ahd_complete_scb(ahd, scb); 914 } else { 915 printf("%s: WARNING no command for scb %d " 916 "(bad status)\n", ahd_name(ahd), scbid); 917 ahd_dump_card_state(ahd); 918 } 919 cmds_pending = ahd_inw(ahd, CMDS_PENDING); 920 if (cmds_pending > 0) 921 ahd_outw(ahd, CMDS_PENDING, cmds_pending - 1); 922 break; 923 } 924 case ENTERING_NONPACK: 925 { 926 struct scb *scb; 927 u_int scbid; 928 929 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 930 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 931 scbid = ahd_get_scbptr(ahd); 932 scb = ahd_lookup_scb(ahd, scbid); 933 if (scb == NULL) { 934 /* 935 * Somehow need to know if this 936 * is from a selection or reselection. 937 * From that, we can determine target 938 * ID so we at least have an I_T nexus. 939 */ 940 } else { 941 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid); 942 ahd_outb(ahd, SAVED_LUN, scb->hscb->lun); 943 ahd_outb(ahd, SEQ_FLAGS, 0x0); 944 } 945 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0 946 && (ahd_inb(ahd, SCSISIGO) & ATNO) != 0) { 947 /* 948 * Phase change after read stream with 949 * CRC error with P0 asserted on last 950 * packet. 951 */ 952#ifdef AHD_DEBUG 953 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) 954 printf("%s: Assuming LQIPHASE_NLQ with " 955 "P0 assertion\n", ahd_name(ahd)); 956#endif 957 } 958#ifdef AHD_DEBUG 959 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) 960 printf("%s: Entering NONPACK\n", ahd_name(ahd)); 961#endif 962 break; 963 } 964 case INVALID_SEQINT: 965 printf("%s: Invalid Sequencer interrupt occurred.\n", 966 ahd_name(ahd)); 967 ahd_dump_card_state(ahd); 968 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 969 break; 970 case STATUS_OVERRUN: 971 { 972 struct scb *scb; 973 u_int scbid; 974 975 scbid = ahd_get_scbptr(ahd); 976 scb = ahd_lookup_scb(ahd, scbid); 977 if (scb != NULL) 978 ahd_print_path(ahd, scb); 979 else 980 printf("%s: ", ahd_name(ahd)); 981 printf("SCB %d Packetized Status Overrun", scbid); 982 ahd_dump_card_state(ahd); 983 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 984 break; 985 } 986 case CFG4ISTAT_INTR: 987 { 988 struct scb *scb; 989 u_int scbid; 990 991 scbid = ahd_get_scbptr(ahd); 992 scb = ahd_lookup_scb(ahd, scbid); 993 if (scb == NULL) { 994 ahd_dump_card_state(ahd); 995 printf("CFG4ISTAT: Free SCB %d referenced", scbid); 996 panic("For safety"); 997 } 998 ahd_outq(ahd, HADDR, scb->sense_busaddr); 999 ahd_outw(ahd, HCNT, AHD_SENSE_BUFSIZE); 1000 ahd_outb(ahd, HCNT + 2, 0); 1001 ahd_outb(ahd, SG_CACHE_PRE, SG_LAST_SEG); 1002 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN); 1003 break; 1004 } 1005 case ILLEGAL_PHASE: 1006 { 1007 u_int bus_phase; 1008 1009 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1010 printf("%s: ILLEGAL_PHASE 0x%x\n", 1011 ahd_name(ahd), bus_phase); 1012 1013 switch (bus_phase) { 1014 case P_DATAOUT: 1015 case P_DATAIN: 1016 case P_DATAOUT_DT: 1017 case P_DATAIN_DT: 1018 case P_MESGOUT: 1019 case P_STATUS: 1020 case P_MESGIN: 1021 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1022 printf("%s: Issued Bus Reset.\n", ahd_name(ahd)); 1023 break; 1024 case P_COMMAND: 1025 { 1026 struct ahd_devinfo devinfo; 1027 struct scb *scb; 1028#ifdef notdef 1029 struct ahd_initiator_tinfo *targ_info; 1030 struct ahd_tmode_tstate *tstate; 1031#endif 1032 u_int scbid; 1033 1034 /* 1035 * If a target takes us into the command phase 1036 * assume that it has been externally reset and 1037 * has thus lost our previous packetized negotiation 1038 * agreement. Since we have not sent an identify 1039 * message and may not have fully qualified the 1040 * connection, we change our command to TUR, assert 1041 * ATN and ABORT the task when we go to message in 1042 * phase. The OSM will see the REQUEUE_REQUEST 1043 * status and retry the command. 1044 */ 1045 scbid = ahd_get_scbptr(ahd); 1046 scb = ahd_lookup_scb(ahd, scbid); 1047 if (scb == NULL) { 1048 printf("Invalid phase with no valid SCB. " 1049 "Resetting bus.\n"); 1050 ahd_reset_channel(ahd, 'A', 1051 /*Initiate Reset*/TRUE); 1052 break; 1053 } 1054 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb), 1055 SCB_GET_TARGET(ahd, scb), 1056 SCB_GET_LUN(scb), 1057 SCB_GET_CHANNEL(ahd, scb), 1058 ROLE_INITIATOR); 1059#ifdef notdef 1060 targ_info = ahd_fetch_transinfo(ahd, 1061 devinfo.channel, 1062 devinfo.our_scsiid, 1063 devinfo.target, 1064 &tstate); 1065#endif 1066 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 1067 AHD_TRANS_ACTIVE, /*paused*/TRUE); 1068 ahd_set_syncrate(ahd, &devinfo, /*period*/0, 1069 /*offset*/0, /*ppr_options*/0, 1070 AHD_TRANS_ACTIVE, /*paused*/TRUE); 1071 ahd_outb(ahd, SCB_CDB_STORE, 0); 1072 ahd_outb(ahd, SCB_CDB_STORE+1, 0); 1073 ahd_outb(ahd, SCB_CDB_STORE+2, 0); 1074 ahd_outb(ahd, SCB_CDB_STORE+3, 0); 1075 ahd_outb(ahd, SCB_CDB_STORE+4, 0); 1076 ahd_outb(ahd, SCB_CDB_STORE+5, 0); 1077 ahd_outb(ahd, SCB_CDB_LEN, 6); 1078 scb->hscb->control &= ~(TAG_ENB|SCB_TAG_TYPE); 1079 scb->hscb->control |= MK_MESSAGE; 1080 ahd_outb(ahd, SCB_CONTROL, scb->hscb->control); 1081 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1082 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid); 1083 /* 1084 * The lun is 0, regardless of the SCB's lun 1085 * as we have not sent an identify message. 1086 */ 1087 ahd_outb(ahd, SAVED_LUN, 0); 1088 ahd_outb(ahd, SEQ_FLAGS, 0); 1089 ahd_assert_atn(ahd); 1090 scb->flags &= ~(SCB_PACKETIZED); 1091 scb->flags |= SCB_ABORT|SCB_CMDPHASE_ABORT; 1092 ahd_freeze_devq(ahd, scb); 1093 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ); 1094 ahd_freeze_scb(scb); 1095 1096 /* 1097 * Allow the sequencer to continue with 1098 * non-pack processing. 1099 */ 1100 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1101 ahd_outb(ahd, CLRLQOINT1, CLRLQOPHACHGINPKT); 1102 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { 1103 ahd_outb(ahd, CLRLQOINT1, 0); 1104 } 1105#ifdef AHD_DEBUG 1106 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1107 ahd_print_path(ahd, scb); 1108 printf("Unexpected command phase from " 1109 "packetized target\n"); 1110 } 1111#endif 1112 break; 1113 } 1114 } 1115 break; 1116 } 1117 case CFG4OVERRUN: 1118 { 1119 struct scb *scb; 1120 u_int scb_index; 1121 1122#ifdef AHD_DEBUG 1123 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1124 printf("%s: CFG4OVERRUN mode = %x\n", ahd_name(ahd), 1125 ahd_inb(ahd, MODE_PTR)); 1126 } 1127#endif 1128 scb_index = ahd_get_scbptr(ahd); 1129 scb = ahd_lookup_scb(ahd, scb_index); 1130 if (scb == NULL) { 1131 /* 1132 * Attempt to transfer to an SCB that is 1133 * not outstanding. 1134 */ 1135 ahd_assert_atn(ahd); 1136 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1137 ahd->msgout_buf[0] = MSG_ABORT_TASK; 1138 ahd->msgout_len = 1; 1139 ahd->msgout_index = 0; 1140 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 1141 /* 1142 * Clear status received flag to prevent any 1143 * attempt to complete this bogus SCB. 1144 */ 1145 ahd_outb(ahd, SCB_CONTROL, 1146 ahd_inb_scbram(ahd, SCB_CONTROL) 1147 & ~STATUS_RCVD); 1148 } 1149 break; 1150 } 1151 case DUMP_CARD_STATE: 1152 { 1153 ahd_dump_card_state(ahd); 1154 break; 1155 } 1156 case PDATA_REINIT: 1157 { 1158#ifdef AHD_DEBUG 1159 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1160 printf("%s: PDATA_REINIT - DFCNTRL = 0x%x " 1161 "SG_CACHE_SHADOW = 0x%x\n", 1162 ahd_name(ahd), ahd_inb(ahd, DFCNTRL), 1163 ahd_inb(ahd, SG_CACHE_SHADOW)); 1164 } 1165#endif 1166 ahd_reinitialize_dataptrs(ahd); 1167 break; 1168 } 1169 case HOST_MSG_LOOP: 1170 { 1171 struct ahd_devinfo devinfo; 1172 1173 /* 1174 * The sequencer has encountered a message phase 1175 * that requires host assistance for completion. 1176 * While handling the message phase(s), we will be 1177 * notified by the sequencer after each byte is 1178 * transferred so we can track bus phase changes. 1179 * 1180 * If this is the first time we've seen a HOST_MSG_LOOP 1181 * interrupt, initialize the state of the host message 1182 * loop. 1183 */ 1184 ahd_fetch_devinfo(ahd, &devinfo); 1185 if (ahd->msg_type == MSG_TYPE_NONE) { 1186 struct scb *scb; 1187 u_int scb_index; 1188 u_int bus_phase; 1189 1190 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1191 if (bus_phase != P_MESGIN 1192 && bus_phase != P_MESGOUT) { 1193 printf("ahd_intr: HOST_MSG_LOOP bad " 1194 "phase 0x%x\n", bus_phase); 1195 /* 1196 * Probably transitioned to bus free before 1197 * we got here. Just punt the message. 1198 */ 1199 ahd_dump_card_state(ahd); 1200 ahd_clear_intstat(ahd); 1201 ahd_restart(ahd); 1202 return; 1203 } 1204 1205 scb_index = ahd_get_scbptr(ahd); 1206 scb = ahd_lookup_scb(ahd, scb_index); 1207 if (devinfo.role == ROLE_INITIATOR) { 1208 if (bus_phase == P_MESGOUT) 1209 ahd_setup_initiator_msgout(ahd, 1210 &devinfo, 1211 scb); 1212 else { 1213 ahd->msg_type = 1214 MSG_TYPE_INITIATOR_MSGIN; 1215 ahd->msgin_index = 0; 1216 } 1217 } 1218#if AHD_TARGET_MODE 1219 else { 1220 if (bus_phase == P_MESGOUT) { 1221 ahd->msg_type = 1222 MSG_TYPE_TARGET_MSGOUT; 1223 ahd->msgin_index = 0; 1224 } 1225 else 1226 ahd_setup_target_msgin(ahd, 1227 &devinfo, 1228 scb); 1229 } 1230#endif 1231 } 1232 1233 ahd_handle_message_phase(ahd); 1234 break; 1235 } 1236 case NO_MATCH: 1237 { 1238 /* Ensure we don't leave the selection hardware on */ 1239 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 1240 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 1241 1242 printf("%s:%c:%d: no active SCB for reconnecting " 1243 "target - issuing BUS DEVICE RESET\n", 1244 ahd_name(ahd), 'A', ahd_inb(ahd, SELID) >> 4); 1245 printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, " 1246 "REG0 == 0x%x ACCUM = 0x%x\n", 1247 ahd_inb(ahd, SAVED_SCSIID), ahd_inb(ahd, SAVED_LUN), 1248 ahd_inw(ahd, REG0), ahd_inb(ahd, ACCUM)); 1249 printf("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, " 1250 "SINDEX == 0x%x\n", 1251 ahd_inb(ahd, SEQ_FLAGS), ahd_get_scbptr(ahd), 1252 ahd_find_busy_tcl(ahd, 1253 BUILD_TCL(ahd_inb(ahd, SAVED_SCSIID), 1254 ahd_inb(ahd, SAVED_LUN))), 1255 ahd_inw(ahd, SINDEX)); 1256 printf("SELID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, " 1257 "SCB_CONTROL == 0x%x\n", 1258 ahd_inb(ahd, SELID), ahd_inb_scbram(ahd, SCB_SCSIID), 1259 ahd_inb_scbram(ahd, SCB_LUN), 1260 ahd_inb_scbram(ahd, SCB_CONTROL)); 1261 printf("SCSIBUS[0] == 0x%x, SCSISIGI == 0x%x\n", 1262 ahd_inb(ahd, SCSIBUS), ahd_inb(ahd, SCSISIGI)); 1263 printf("SXFRCTL0 == 0x%x\n", ahd_inb(ahd, SXFRCTL0)); 1264 printf("SEQCTL0 == 0x%x\n", ahd_inb(ahd, SEQCTL0)); 1265 ahd_dump_card_state(ahd); 1266 ahd->msgout_buf[0] = MSG_BUS_DEV_RESET; 1267 ahd->msgout_len = 1; 1268 ahd->msgout_index = 0; 1269 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 1270 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1271 ahd_assert_atn(ahd); 1272 break; 1273 } 1274 case PROTO_VIOLATION: 1275 { 1276 ahd_handle_proto_violation(ahd); 1277 break; 1278 } 1279 case IGN_WIDE_RES: 1280 { 1281 struct ahd_devinfo devinfo; 1282 1283 ahd_fetch_devinfo(ahd, &devinfo); 1284 ahd_handle_ign_wide_residue(ahd, &devinfo); 1285 break; 1286 } 1287 case BAD_PHASE: 1288 { 1289 u_int lastphase; 1290 1291 lastphase = ahd_inb(ahd, LASTPHASE); 1292 printf("%s:%c:%d: unknown scsi bus phase %x, " 1293 "lastphase = 0x%x. Attempting to continue\n", 1294 ahd_name(ahd), 'A', 1295 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)), 1296 lastphase, ahd_inb(ahd, SCSISIGI)); 1297 break; 1298 } 1299 case MISSED_BUSFREE: 1300 { 1301 u_int lastphase; 1302 1303 lastphase = ahd_inb(ahd, LASTPHASE); 1304 printf("%s:%c:%d: Missed busfree. " 1305 "Lastphase = 0x%x, Curphase = 0x%x\n", 1306 ahd_name(ahd), 'A', 1307 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)), 1308 lastphase, ahd_inb(ahd, SCSISIGI)); 1309 ahd_restart(ahd); 1310 return; 1311 } 1312 case DATA_OVERRUN: 1313 { 1314 /* 1315 * When the sequencer detects an overrun, it 1316 * places the controller in "BITBUCKET" mode 1317 * and allows the target to complete its transfer. 1318 * Unfortunately, none of the counters get updated 1319 * when the controller is in this mode, so we have 1320 * no way of knowing how large the overrun was. 1321 */ 1322 struct scb *scb; 1323 u_int scbindex; 1324#ifdef AHD_DEBUG 1325 u_int lastphase; 1326#endif 1327 1328 scbindex = ahd_get_scbptr(ahd); 1329 scb = ahd_lookup_scb(ahd, scbindex); 1330#ifdef AHD_DEBUG 1331 lastphase = ahd_inb(ahd, LASTPHASE); 1332 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1333 ahd_print_path(ahd, scb); 1334 printf("data overrun detected %s. Tag == 0x%x.\n", 1335 ahd_lookup_phase_entry(lastphase)->phasemsg, 1336 SCB_GET_TAG(scb)); 1337 ahd_print_path(ahd, scb); 1338 printf("%s seen Data Phase. Length = %ld. " 1339 "NumSGs = %d.\n", 1340 ahd_inb(ahd, SEQ_FLAGS) & DPHASE 1341 ? "Have" : "Haven't", 1342 ahd_get_transfer_length(scb), scb->sg_count); 1343 ahd_dump_sglist(scb); 1344 } 1345#endif 1346 1347 /* 1348 * Set this and it will take effect when the 1349 * target does a command complete. 1350 */ 1351 ahd_freeze_devq(ahd, scb); 1352 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR); 1353 ahd_freeze_scb(scb); 1354 break; 1355 } 1356 case MKMSG_FAILED: 1357 { 1358 struct ahd_devinfo devinfo; 1359 struct scb *scb; 1360 u_int scbid; 1361 1362 ahd_fetch_devinfo(ahd, &devinfo); 1363 printf("%s:%c:%d:%d: Attempt to issue message failed\n", 1364 ahd_name(ahd), devinfo.channel, devinfo.target, 1365 devinfo.lun); 1366 scbid = ahd_get_scbptr(ahd); 1367 scb = ahd_lookup_scb(ahd, scbid); 1368 if (scb != NULL 1369 && (scb->flags & SCB_RECOVERY_SCB) != 0) 1370 /* 1371 * Ensure that we didn't put a second instance of this 1372 * SCB into the QINFIFO. 1373 */ 1374 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 1375 SCB_GET_CHANNEL(ahd, scb), 1376 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 1377 ROLE_INITIATOR, /*status*/0, 1378 SEARCH_REMOVE); 1379 ahd_outb(ahd, SCB_CONTROL, 1380 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE); 1381 break; 1382 } 1383 case TASKMGMT_FUNC_COMPLETE: 1384 { 1385 u_int scbid; 1386 struct scb *scb; 1387 1388 scbid = ahd_get_scbptr(ahd); 1389 scb = ahd_lookup_scb(ahd, scbid); 1390 if (scb != NULL) { 1391 u_int lun; 1392 u_int tag; 1393 cam_status error; 1394 1395 ahd_print_path(ahd, scb); 1396 printf("Task Management Func 0x%x Complete\n", 1397 scb->hscb->task_management); 1398 lun = CAM_LUN_WILDCARD; 1399 tag = SCB_LIST_NULL; 1400 1401 switch (scb->hscb->task_management) { 1402 case SIU_TASKMGMT_ABORT_TASK: 1403 tag = SCB_GET_TAG(scb); 1404 /* FALLTHROUGH */ 1405 case SIU_TASKMGMT_ABORT_TASK_SET: 1406 case SIU_TASKMGMT_CLEAR_TASK_SET: 1407 lun = scb->hscb->lun; 1408 error = CAM_REQ_ABORTED; 1409 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 1410 'A', lun, tag, ROLE_INITIATOR, 1411 error); 1412 break; 1413 case SIU_TASKMGMT_LUN_RESET: 1414 lun = scb->hscb->lun; 1415 /* FALLTHROUGH */ 1416 case SIU_TASKMGMT_TARGET_RESET: 1417 { 1418 struct ahd_devinfo devinfo; 1419 1420 ahd_scb_devinfo(ahd, &devinfo, scb); 1421 error = CAM_BDR_SENT; 1422 ahd_handle_devreset(ahd, &devinfo, lun, 1423 CAM_BDR_SENT, 1424 lun != CAM_LUN_WILDCARD 1425 ? "Lun Reset" 1426 : "Target Reset", 1427 /*verbose_level*/0); 1428 break; 1429 } 1430 default: 1431 panic("Unexpected TaskMgmt Func\n"); 1432 break; 1433 } 1434 } 1435 break; 1436 } 1437 case TASKMGMT_CMD_CMPLT_OKAY: 1438 { 1439 u_int scbid; 1440 struct scb *scb; 1441 1442 /* 1443 * An ABORT TASK TMF failed to be delivered before 1444 * the targeted command completed normally. 1445 */ 1446 scbid = ahd_get_scbptr(ahd); 1447 scb = ahd_lookup_scb(ahd, scbid); 1448 if (scb != NULL) { 1449 /* 1450 * Remove the second instance of this SCB from 1451 * the QINFIFO if it is still there. 1452 */ 1453 ahd_print_path(ahd, scb); 1454 printf("SCB completes before TMF\n"); 1455 /* 1456 * Handle losing the race. Wait until any 1457 * current selection completes. We will then 1458 * set the TMF back to zero in this SCB so that 1459 * the sequencer doesn't bother to issue another 1460 * sequencer interrupt for its completion. 1461 */ 1462 while ((ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0 1463 && (ahd_inb(ahd, SSTAT0) & SELDO) == 0 1464 && (ahd_inb(ahd, SSTAT1) & SELTO) == 0) 1465 ; 1466 ahd_outb(ahd, SCB_TASK_MANAGEMENT, 0); 1467 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 1468 SCB_GET_CHANNEL(ahd, scb), 1469 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 1470 ROLE_INITIATOR, /*status*/0, 1471 SEARCH_REMOVE); 1472 } 1473 break; 1474 } 1475 case TRACEPOINT0: 1476 case TRACEPOINT1: 1477 case TRACEPOINT2: 1478 case TRACEPOINT3: 1479 printf("%s: Tracepoint %d\n", ahd_name(ahd), 1480 seqintcode - TRACEPOINT0); 1481 break; 1482 case NO_SEQINT: 1483 break; 1484 case SAW_HWERR: 1485 ahd_handle_hwerrint(ahd); 1486 break; 1487 default: 1488 printf("%s: Unexpected SEQINTCODE %d\n", ahd_name(ahd), 1489 seqintcode); 1490 break; 1491 } 1492 /* 1493 * The sequencer is paused immediately on 1494 * a SEQINT, so we should restart it when 1495 * we're done. 1496 */ 1497 ahd_unpause(ahd); 1498} 1499 1500void 1501ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) 1502{ 1503 struct scb *scb; 1504 u_int status0; 1505 u_int status3; 1506 u_int status; 1507 u_int lqistat1; 1508 u_int lqostat0; 1509 u_int scbid; 1510 u_int busfreetime; 1511 1512 ahd_update_modes(ahd); 1513 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1514 1515 status3 = ahd_inb(ahd, SSTAT3) & (NTRAMPERR|OSRAMPERR); 1516 status0 = ahd_inb(ahd, SSTAT0) & (IOERR|OVERRUN|SELDI|SELDO); 1517 status = ahd_inb(ahd, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR); 1518 lqistat1 = ahd_inb(ahd, LQISTAT1); 1519 lqostat0 = ahd_inb(ahd, LQOSTAT0); 1520 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME; 1521 if ((status0 & (SELDI|SELDO)) != 0) { 1522 u_int simode0; 1523 1524 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 1525 simode0 = ahd_inb(ahd, SIMODE0); 1526 status0 &= simode0 & (IOERR|OVERRUN|SELDI|SELDO); 1527 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1528 } 1529 scbid = ahd_get_scbptr(ahd); 1530 scb = ahd_lookup_scb(ahd, scbid); 1531 if (scb != NULL 1532 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) 1533 scb = NULL; 1534 1535 /* Make sure the sequencer is in a safe location. */ 1536 ahd_clear_critical_section(ahd); 1537 1538 if ((status0 & IOERR) != 0) { 1539 u_int now_lvd; 1540 1541 now_lvd = ahd_inb(ahd, SBLKCTL) & ENAB40; 1542 printf("%s: Transceiver State Has Changed to %s mode\n", 1543 ahd_name(ahd), now_lvd ? "LVD" : "SE"); 1544 ahd_outb(ahd, CLRSINT0, CLRIOERR); 1545 /* 1546 * A change in I/O mode is equivalent to a bus reset. 1547 */ 1548 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1549 ahd_pause(ahd); 1550 ahd_setup_iocell_workaround(ahd); 1551 ahd_unpause(ahd); 1552 } else if ((status0 & OVERRUN) != 0) { 1553 printf("%s: SCSI offset overrun detected. Resetting bus.\n", 1554 ahd_name(ahd)); 1555 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1556 } else if ((status & SCSIRSTI) != 0) { 1557 printf("%s: Someone reset channel A\n", ahd_name(ahd)); 1558 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/FALSE); 1559 } else if ((status & SCSIPERR) != 0) { 1560 ahd_handle_transmission_error(ahd); 1561 } else if (lqostat0 != 0) { 1562 printf("%s: lqostat0 == 0x%x!\n", ahd_name(ahd), lqostat0); 1563 ahd_outb(ahd, CLRLQOINT0, lqostat0); 1564 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { 1565 ahd_outb(ahd, CLRLQOINT1, 0); 1566 } 1567 } else if ((status & SELTO) != 0) { 1568 u_int scbid1; 1569 1570 /* Stop the selection */ 1571 ahd_outb(ahd, SCSISEQ0, 0); 1572 1573 /* No more pending messages */ 1574 ahd_clear_msg_state(ahd); 1575 1576 /* Clear interrupt state */ 1577 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR); 1578 1579 /* 1580 * Although the driver does not care about the 1581 * 'Selection in Progress' status bit, the busy 1582 * LED does. SELINGO is only cleared by a successful 1583 * selection, so we must manually clear it to insure 1584 * the LED turns off just incase no future successful 1585 * selections occur (e.g. no devices on the bus). 1586 */ 1587 ahd_outb(ahd, CLRSINT0, CLRSELINGO); 1588 1589 scbid1 = ahd_inw(ahd, WAITING_TID_HEAD); 1590 scb = ahd_lookup_scb(ahd, scbid1); 1591 if (scb == NULL) { 1592 printf("%s: ahd_intr - referenced scb not " 1593 "valid during SELTO scb(0x%x)\n", 1594 ahd_name(ahd), scbid1); 1595 ahd_dump_card_state(ahd); 1596 } else { 1597 struct ahd_devinfo devinfo; 1598#ifdef AHD_DEBUG 1599 if ((ahd_debug & AHD_SHOW_SELTO) != 0) { 1600 ahd_print_path(ahd, scb); 1601 printf("Saw Selection Timeout for SCB 0x%x\n", 1602 scbid1); 1603 } 1604#endif 1605 /* 1606 * Force a renegotiation with this target just in 1607 * case the cable was pulled and will later be 1608 * re-attached. The target may forget its negotiation 1609 * settings with us should it attempt to reselect 1610 * during the interruption. The target will not issue 1611 * a unit attention in this case, so we must always 1612 * renegotiate. 1613 */ 1614 ahd_scb_devinfo(ahd, &devinfo, scb); 1615 ahd_force_renegotiation(ahd, &devinfo); 1616 ahd_set_transaction_status(scb, CAM_SEL_TIMEOUT); 1617 ahd_freeze_devq(ahd, scb); 1618 } 1619 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1620 ahd_iocell_first_selection(ahd); 1621 ahd_unpause(ahd); 1622 } else if ((status0 & (SELDI|SELDO)) != 0) { 1623 ahd_iocell_first_selection(ahd); 1624 ahd_unpause(ahd); 1625 } else if (status3 != 0) { 1626 printf("%s: SCSI Cell parity error SSTAT3 == 0x%x\n", 1627 ahd_name(ahd), status3); 1628 ahd_outb(ahd, CLRSINT3, status3); 1629 } else if ((lqistat1 & (LQIPHASE_LQ|LQIPHASE_NLQ)) != 0) { 1630 ahd_handle_lqiphase_error(ahd, lqistat1); 1631 } else if ((lqistat1 & LQICRCI_NLQ) != 0) { 1632 /* 1633 * This status can be delayed during some 1634 * streaming operations. The SCSIPHASE 1635 * handler has already dealt with this case 1636 * so just clear the error. 1637 */ 1638 ahd_outb(ahd, CLRLQIINT1, CLRLQICRCI_NLQ); 1639 } else if ((status & BUSFREE) != 0) { 1640 u_int lqostat1; 1641 int restart; 1642 int clear_fifo; 1643 int packetized; 1644 u_int mode; 1645 1646 /* 1647 * Clear our selection hardware as soon as possible. 1648 * We may have an entry in the waiting Q for this target, 1649 * that is affected by this busfree and we don't want to 1650 * go about selecting the target while we handle the event. 1651 */ 1652 ahd_outb(ahd, SCSISEQ0, 0); 1653 1654 /* 1655 * Determine what we were up to at the time of 1656 * the busfree. 1657 */ 1658 mode = AHD_MODE_SCSI; 1659 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME; 1660 lqostat1 = ahd_inb(ahd, LQOSTAT1); 1661 switch (busfreetime) { 1662 case BUSFREE_DFF0: 1663 case BUSFREE_DFF1: 1664 { 1665 u_int scbid1; 1666 struct scb *scb1; 1667 1668 mode = busfreetime == BUSFREE_DFF0 1669 ? AHD_MODE_DFF0 : AHD_MODE_DFF1; 1670 ahd_set_modes(ahd, mode, mode); 1671 scbid1 = ahd_get_scbptr(ahd); 1672 scb1 = ahd_lookup_scb(ahd, scbid1); 1673 if (scb1 == NULL) { 1674 printf("%s: Invalid SCB %d in DFF%d " 1675 "during unexpected busfree\n", 1676 ahd_name(ahd), scbid1, mode); 1677 packetized = 0; 1678 } else 1679 packetized = 1680 (scb1->flags & SCB_PACKETIZED) != 0; 1681 clear_fifo = 1; 1682 break; 1683 } 1684 case BUSFREE_LQO: 1685 clear_fifo = 0; 1686 packetized = 1; 1687 break; 1688 default: 1689 clear_fifo = 0; 1690 packetized = (lqostat1 & LQOBUSFREE) != 0; 1691 if (!packetized 1692 && ahd_inb(ahd, LASTPHASE) == P_BUSFREE) 1693 packetized = 1; 1694 break; 1695 } 1696 1697#ifdef AHD_DEBUG 1698 if ((ahd_debug & AHD_SHOW_MISC) != 0) 1699 printf("Saw Busfree. Busfreetime = 0x%x.\n", 1700 busfreetime); 1701#endif 1702 /* 1703 * Busfrees that occur in non-packetized phases are 1704 * handled by the nonpkt_busfree handler. 1705 */ 1706 if (packetized && ahd_inb(ahd, LASTPHASE) == P_BUSFREE) { 1707 restart = ahd_handle_pkt_busfree(ahd, busfreetime); 1708 } else { 1709 packetized = 0; 1710 restart = ahd_handle_nonpkt_busfree(ahd); 1711 } 1712 /* 1713 * Clear the busfree interrupt status. The setting of 1714 * the interrupt is a pulse, so in a perfect world, we 1715 * would not need to muck with the ENBUSFREE logic. This 1716 * would ensure that if the bus moves on to another 1717 * connection, busfree protection is still in force. If 1718 * BUSFREEREV is broken, however, we must manually clear 1719 * the ENBUSFREE if the busfree occurred during a non-pack 1720 * connection so that we don't get false positives during 1721 * future, packetized, connections. 1722 */ 1723 ahd_outb(ahd, CLRSINT1, CLRBUSFREE); 1724 if (packetized == 0 1725 && (ahd->bugs & AHD_BUSFREEREV_BUG) != 0) 1726 ahd_outb(ahd, SIMODE1, 1727 ahd_inb(ahd, SIMODE1) & ~ENBUSFREE); 1728 1729 if (clear_fifo) 1730 ahd_clear_fifo(ahd, mode); 1731 1732 ahd_clear_msg_state(ahd); 1733 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1734 if (restart) { 1735 ahd_restart(ahd); 1736 } else { 1737 ahd_unpause(ahd); 1738 } 1739 } else { 1740 printf("%s: Missing case in ahd_handle_scsiint. status = %x\n", 1741 ahd_name(ahd), status); 1742 ahd_dump_card_state(ahd); 1743 ahd_clear_intstat(ahd); 1744 ahd_unpause(ahd); 1745 } 1746} 1747 1748static void 1749ahd_handle_transmission_error(struct ahd_softc *ahd) 1750{ 1751 struct scb *scb; 1752 u_int scbid; 1753 u_int lqistat1; 1754 u_int msg_out; 1755 u_int curphase; 1756 u_int lastphase; 1757 u_int perrdiag; 1758 u_int cur_col; 1759 int silent; 1760 1761 scb = NULL; 1762 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1763 lqistat1 = ahd_inb(ahd, LQISTAT1) & ~(LQIPHASE_LQ|LQIPHASE_NLQ); 1764 (void)ahd_inb(ahd, LQISTAT2); 1765 if ((lqistat1 & (LQICRCI_NLQ|LQICRCI_LQ)) == 0 1766 && (ahd->bugs & AHD_NLQICRC_DELAYED_BUG) != 0) { 1767 u_int lqistate; 1768 1769 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 1770 lqistate = ahd_inb(ahd, LQISTATE); 1771 if ((lqistate >= 0x1E && lqistate <= 0x24) 1772 || (lqistate == 0x29)) { 1773#ifdef AHD_DEBUG 1774 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1775 printf("%s: NLQCRC found via LQISTATE\n", 1776 ahd_name(ahd)); 1777 } 1778#endif 1779 lqistat1 |= LQICRCI_NLQ; 1780 } 1781 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1782 } 1783 1784 ahd_outb(ahd, CLRLQIINT1, lqistat1); 1785 lastphase = ahd_inb(ahd, LASTPHASE); 1786 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1787 perrdiag = ahd_inb(ahd, PERRDIAG); 1788 msg_out = MSG_INITIATOR_DET_ERR; 1789 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR); 1790 1791 /* 1792 * Try to find the SCB associated with this error. 1793 */ 1794 silent = FALSE; 1795 if (lqistat1 == 0 1796 || (lqistat1 & LQICRCI_NLQ) != 0) { 1797 if ((lqistat1 & (LQICRCI_NLQ|LQIOVERI_NLQ)) != 0) 1798 ahd_set_active_fifo(ahd); 1799 scbid = ahd_get_scbptr(ahd); 1800 scb = ahd_lookup_scb(ahd, scbid); 1801 if (scb != NULL && SCB_IS_SILENT(scb)) 1802 silent = TRUE; 1803 } 1804 1805 cur_col = 0; 1806 if (silent == FALSE) { 1807 printf("%s: Transmission error detected\n", ahd_name(ahd)); 1808 ahd_lqistat1_print(lqistat1, &cur_col, 50); 1809 ahd_lastphase_print(lastphase, &cur_col, 50); 1810 ahd_scsisigi_print(curphase, &cur_col, 50); 1811 ahd_perrdiag_print(perrdiag, &cur_col, 50); 1812 printf("\n"); 1813 ahd_dump_card_state(ahd); 1814 } 1815 1816 if ((lqistat1 & (LQIOVERI_LQ|LQIOVERI_NLQ)) != 0) { 1817 if (silent == FALSE) { 1818 printf("%s: Gross protocol error during incoming " 1819 "packet. lqistat1 == 0x%x. Resetting bus.\n", 1820 ahd_name(ahd), lqistat1); 1821 } 1822 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1823 return; 1824 } else if ((lqistat1 & LQICRCI_LQ) != 0) { 1825 /* 1826 * A CRC error has been detected on an incoming LQ. 1827 * The bus is currently hung on the last ACK. 1828 * Hit LQIRETRY to release the last ack, and 1829 * wait for the sequencer to determine that ATNO 1830 * is asserted while in message out to take us 1831 * to our host message loop. No NONPACKREQ or 1832 * LQIPHASE type errors will occur in this 1833 * scenario. After this first LQIRETRY, the LQI 1834 * manager will be in ISELO where it will 1835 * happily sit until another packet phase begins. 1836 * Unexpected bus free detection is enabled 1837 * through any phases that occur after we release 1838 * this last ack until the LQI manager sees a 1839 * packet phase. This implies we may have to 1840 * ignore a perfectly valid "unexpected busfree" 1841 * after our "initiator detected error" message is 1842 * sent. A busfree is the expected response after 1843 * we tell the target that its L_Q was corrupted. 1844 * (SPI4R09 10.7.3.3.3) 1845 */ 1846 ahd_outb(ahd, LQCTL2, LQIRETRY); 1847 printf("LQIRetry for LQICRCI_LQ to release ACK\n"); 1848 } else if ((lqistat1 & LQICRCI_NLQ) != 0) { 1849 /* 1850 * We detected a CRC error in a NON-LQ packet. 1851 * The hardware has varying behavior in this situation 1852 * depending on whether this packet was part of a 1853 * stream or not. 1854 * 1855 * PKT by PKT mode: 1856 * The hardware has already acked the complete packet. 1857 * If the target honors our outstanding ATN condition, 1858 * we should be (or soon will be) in MSGOUT phase. 1859 * This will trigger the LQIPHASE_LQ status bit as the 1860 * hardware was expecting another LQ. Unexpected 1861 * busfree detection is enabled. Once LQIPHASE_LQ is 1862 * true (first entry into host message loop is much 1863 * the same), we must clear LQIPHASE_LQ and hit 1864 * LQIRETRY so the hardware is ready to handle 1865 * a future LQ. NONPACKREQ will not be asserted again 1866 * once we hit LQIRETRY until another packet is 1867 * processed. The target may either go busfree 1868 * or start another packet in response to our message. 1869 * 1870 * Read Streaming P0 asserted: 1871 * If we raise ATN and the target completes the entire 1872 * stream (P0 asserted during the last packet), the 1873 * hardware will ack all data and return to the ISTART 1874 * state. When the target responds to our ATN condition, 1875 * LQIPHASE_LQ will be asserted. We should respond to 1876 * this with an LQIRETRY to prepare for any future 1877 * packets. NONPACKREQ will not be asserted again 1878 * once we hit LQIRETRY until another packet is 1879 * processed. The target may either go busfree or 1880 * start another packet in response to our message. 1881 * Busfree detection is enabled. 1882 * 1883 * Read Streaming P0 not asserted: 1884 * If we raise ATN and the target transitions to 1885 * MSGOUT in or after a packet where P0 is not 1886 * asserted, the hardware will assert LQIPHASE_NLQ. 1887 * We should respond to the LQIPHASE_NLQ with an 1888 * LQIRETRY. Should the target stay in a non-pkt 1889 * phase after we send our message, the hardware 1890 * will assert LQIPHASE_LQ. Recovery is then just as 1891 * listed above for the read streaming with P0 asserted. 1892 * Busfree detection is enabled. 1893 */ 1894 if (silent == FALSE) 1895 printf("LQICRC_NLQ\n"); 1896 if (scb == NULL) { 1897 printf("%s: No SCB valid for LQICRC_NLQ. " 1898 "Resetting bus\n", ahd_name(ahd)); 1899 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1900 return; 1901 } 1902 } else if ((lqistat1 & LQIBADLQI) != 0) { 1903 printf("Need to handle BADLQI!\n"); 1904 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1905 return; 1906 } else if ((perrdiag & (PARITYERR|PREVPHASE)) == PARITYERR) { 1907 if ((curphase & ~P_DATAIN_DT) != 0) { 1908 /* Ack the byte. So we can continue. */ 1909 if (silent == FALSE) 1910 printf("Acking %s to clear perror\n", 1911 ahd_lookup_phase_entry(curphase)->phasemsg); 1912 ahd_inb(ahd, SCSIDAT); 1913 } 1914 1915 if (curphase == P_MESGIN) 1916 msg_out = MSG_PARITY_ERROR; 1917 } 1918 1919 /* 1920 * We've set the hardware to assert ATN if we 1921 * get a parity error on "in" phases, so all we 1922 * need to do is stuff the message buffer with 1923 * the appropriate message. "In" phases have set 1924 * mesg_out to something other than MSG_NOP. 1925 */ 1926 ahd->send_msg_perror = msg_out; 1927 if (scb != NULL && msg_out == MSG_INITIATOR_DET_ERR) 1928 scb->flags |= SCB_TRANSMISSION_ERROR; 1929 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1930 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1931 ahd_unpause(ahd); 1932} 1933 1934static void 1935ahd_handle_lqiphase_error(struct ahd_softc *ahd, u_int lqistat1) 1936{ 1937 /* 1938 * Clear the sources of the interrupts. 1939 */ 1940 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1941 ahd_outb(ahd, CLRLQIINT1, lqistat1); 1942 1943 /* 1944 * If the "illegal" phase changes were in response 1945 * to our ATN to flag a CRC error, AND we ended up 1946 * on packet boundaries, clear the error, restart the 1947 * LQI manager as appropriate, and go on our merry 1948 * way toward sending the message. Otherwise, reset 1949 * the bus to clear the error. 1950 */ 1951 ahd_set_active_fifo(ahd); 1952 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0 1953 && (ahd_inb(ahd, MDFFSTAT) & DLZERO) != 0) { 1954 if ((lqistat1 & LQIPHASE_LQ) != 0) { 1955 printf("LQIRETRY for LQIPHASE_LQ\n"); 1956 ahd_outb(ahd, LQCTL2, LQIRETRY); 1957 } else if ((lqistat1 & LQIPHASE_NLQ) != 0) { 1958 printf("LQIRETRY for LQIPHASE_NLQ\n"); 1959 ahd_outb(ahd, LQCTL2, LQIRETRY); 1960 } else 1961 panic("ahd_handle_lqiphase_error: No phase errors\n"); 1962 ahd_dump_card_state(ahd); 1963 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1964 ahd_unpause(ahd); 1965 } else { 1966 printf("Resetting Channel for LQI Phase error\n"); 1967 ahd_dump_card_state(ahd); 1968 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1969 } 1970} 1971 1972/* 1973 * Packetized unexpected or expected busfree. 1974 * Entered in mode based on busfreetime. 1975 */ 1976static int 1977ahd_handle_pkt_busfree(struct ahd_softc *ahd, u_int busfreetime) 1978{ 1979 u_int lqostat1; 1980 1981 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 1982 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 1983 lqostat1 = ahd_inb(ahd, LQOSTAT1); 1984 if ((lqostat1 & LQOBUSFREE) != 0) { 1985 struct scb *scb; 1986 u_int scbid; 1987 u_int saved_scbptr; 1988 u_int waiting_h; 1989 u_int waiting_t; 1990 u_int next; 1991 1992 if ((busfreetime & BUSFREE_LQO) == 0) 1993 printf("%s: Warning, BUSFREE time is 0x%x. " 1994 "Expected BUSFREE_LQO.\n", 1995 ahd_name(ahd), busfreetime); 1996 /* 1997 * The LQO manager detected an unexpected busfree 1998 * either: 1999 * 2000 * 1) During an outgoing LQ. 2001 * 2) After an outgoing LQ but before the first 2002 * REQ of the command packet. 2003 * 3) During an outgoing command packet. 2004 * 2005 * In all cases, CURRSCB is pointing to the 2006 * SCB that encountered the failure. Clean 2007 * up the queue, clear SELDO and LQOBUSFREE, 2008 * and allow the sequencer to restart the select 2009 * out at its lesure. 2010 */ 2011 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2012 scbid = ahd_inw(ahd, CURRSCB); 2013 scb = ahd_lookup_scb(ahd, scbid); 2014 if (scb == NULL) 2015 panic("SCB not valid during LQOBUSFREE"); 2016 /* 2017 * Clear the status. 2018 */ 2019 ahd_outb(ahd, CLRLQOINT1, CLRLQOBUSFREE); 2020 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) 2021 ahd_outb(ahd, CLRLQOINT1, 0); 2022 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 2023 ahd_flush_device_writes(ahd); 2024 ahd_outb(ahd, CLRSINT0, CLRSELDO); 2025 2026 /* 2027 * Return the LQO manager to its idle loop. It will 2028 * not do this automatically if the busfree occurs 2029 * after the first REQ of either the LQ or command 2030 * packet or between the LQ and command packet. 2031 */ 2032 ahd_outb(ahd, LQCTL2, ahd_inb(ahd, LQCTL2) | LQOTOIDLE); 2033 2034 /* 2035 * Update the waiting for selection queue so 2036 * we restart on the correct SCB. 2037 */ 2038 waiting_h = ahd_inw(ahd, WAITING_TID_HEAD); 2039 saved_scbptr = ahd_get_scbptr(ahd); 2040 if (waiting_h != scbid) { 2041 2042 ahd_outw(ahd, WAITING_TID_HEAD, scbid); 2043 waiting_t = ahd_inw(ahd, WAITING_TID_TAIL); 2044 if (waiting_t == waiting_h) { 2045 ahd_outw(ahd, WAITING_TID_TAIL, scbid); 2046 next = SCB_LIST_NULL; 2047 } else { 2048 ahd_set_scbptr(ahd, waiting_h); 2049 next = ahd_inw_scbram(ahd, SCB_NEXT2); 2050 } 2051 ahd_set_scbptr(ahd, scbid); 2052 ahd_outw(ahd, SCB_NEXT2, next); 2053 } 2054 ahd_set_scbptr(ahd, saved_scbptr); 2055 if (scb->crc_retry_count < AHD_MAX_LQ_CRC_ERRORS) { 2056 if (SCB_IS_SILENT(scb) == FALSE) { 2057 ahd_print_path(ahd, scb); 2058 printf("Probable outgoing LQ CRC error. " 2059 "Retrying command\n"); 2060 } 2061 scb->crc_retry_count++; 2062 } else { 2063 ahd_set_transaction_status(scb, CAM_UNCOR_PARITY); 2064 ahd_freeze_scb(scb); 2065 ahd_freeze_devq(ahd, scb); 2066 } 2067 /* Return unpausing the sequencer. */ 2068 return (0); 2069 } else if ((ahd_inb(ahd, PERRDIAG) & PARITYERR) != 0) { 2070 /* 2071 * Ignore what are really parity errors that 2072 * occur on the last REQ of a free running 2073 * clock prior to going busfree. Some drives 2074 * do not properly active negate just before 2075 * going busfree resulting in a parity glitch. 2076 */ 2077 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR|CLRBUSFREE); 2078#ifdef AHD_DEBUG 2079 if ((ahd_debug & AHD_SHOW_MASKED_ERRORS) != 0) 2080 printf("%s: Parity on last REQ detected " 2081 "during busfree phase.\n", 2082 ahd_name(ahd)); 2083#endif 2084 /* Return unpausing the sequencer. */ 2085 return (0); 2086 } 2087 if (ahd->src_mode != AHD_MODE_SCSI) { 2088 u_int scbid; 2089 struct scb *scb; 2090 2091 scbid = ahd_get_scbptr(ahd); 2092 scb = ahd_lookup_scb(ahd, scbid); 2093 ahd_print_path(ahd, scb); 2094 printf("Unexpected PKT busfree condition\n"); 2095 ahd_dump_card_state(ahd); 2096 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 'A', 2097 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 2098 ROLE_INITIATOR, CAM_UNEXP_BUSFREE); 2099 2100 /* Return restarting the sequencer. */ 2101 return (1); 2102 } 2103 printf("%s: Unexpected PKT busfree condition\n", ahd_name(ahd)); 2104 ahd_dump_card_state(ahd); 2105 /* Restart the sequencer. */ 2106 return (1); 2107} 2108 2109/* 2110 * Non-packetized unexpected or expected busfree. 2111 */ 2112static int 2113ahd_handle_nonpkt_busfree(struct ahd_softc *ahd) 2114{ 2115 struct ahd_devinfo devinfo; 2116 struct scb *scb; 2117 u_int lastphase; 2118 u_int saved_scsiid; 2119 u_int saved_lun; 2120 u_int target; 2121 u_int initiator_role_id; 2122 u_int scbid; 2123 u_int ppr_busfree; 2124 int printerror; 2125 2126 /* 2127 * Look at what phase we were last in. If its message out, 2128 * chances are pretty good that the busfree was in response 2129 * to one of our abort requests. 2130 */ 2131 lastphase = ahd_inb(ahd, LASTPHASE); 2132 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); 2133 saved_lun = ahd_inb(ahd, SAVED_LUN); 2134 target = SCSIID_TARGET(ahd, saved_scsiid); 2135 initiator_role_id = SCSIID_OUR_ID(saved_scsiid); 2136 ahd_compile_devinfo(&devinfo, initiator_role_id, 2137 target, saved_lun, 'A', ROLE_INITIATOR); 2138 printerror = 1; 2139 2140 scbid = ahd_get_scbptr(ahd); 2141 scb = ahd_lookup_scb(ahd, scbid); 2142 if (scb != NULL 2143 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) 2144 scb = NULL; 2145 2146 ppr_busfree = (ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0; 2147 if (lastphase == P_MESGOUT) { 2148 u_int tag; 2149 2150 tag = SCB_LIST_NULL; 2151 if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT_TAG, TRUE) 2152 || ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT, TRUE)) { 2153 int found; 2154 int sent_msg; 2155 2156 if (scb == NULL) { 2157 ahd_print_devinfo(ahd, &devinfo); 2158 printf("Abort for unidentified " 2159 "connection completed.\n"); 2160 /* restart the sequencer. */ 2161 return (1); 2162 } 2163 sent_msg = ahd->msgout_buf[ahd->msgout_index - 1]; 2164 ahd_print_path(ahd, scb); 2165 printf("SCB %d - Abort%s Completed.\n", 2166 SCB_GET_TAG(scb), 2167 sent_msg == MSG_ABORT_TAG ? "" : " Tag"); 2168 2169 if (sent_msg == MSG_ABORT_TAG) 2170 tag = SCB_GET_TAG(scb); 2171 2172 if ((scb->flags & SCB_CMDPHASE_ABORT) != 0) { 2173 /* 2174 * This abort is in response to an 2175 * unexpected switch to command phase 2176 * for a packetized connection. Since 2177 * the identify message was never sent, 2178 * "saved lun" is 0. We really want to 2179 * abort only the SCB that encountered 2180 * this error, which could have a different 2181 * lun. The SCB will be retried so the OS 2182 * will see the UA after renegotiating to 2183 * packetized. 2184 */ 2185 tag = SCB_GET_TAG(scb); 2186 saved_lun = scb->hscb->lun; 2187 } 2188 found = ahd_abort_scbs(ahd, target, 'A', saved_lun, 2189 tag, ROLE_INITIATOR, 2190 CAM_REQ_ABORTED); 2191 printf("found == 0x%x\n", found); 2192 printerror = 0; 2193 } else if (ahd_sent_msg(ahd, AHDMSG_1B, 2194 MSG_BUS_DEV_RESET, TRUE)) { 2195#ifdef __FreeBSD__ 2196 /* 2197 * Don't mark the user's request for this BDR 2198 * as completing with CAM_BDR_SENT. CAM3 2199 * specifies CAM_REQ_CMP. 2200 */ 2201 if (scb != NULL 2202 && scb->io_ctx->ccb_h.func_code== XPT_RESET_DEV 2203 && ahd_match_scb(ahd, scb, target, 'A', 2204 CAM_LUN_WILDCARD, SCB_LIST_NULL, 2205 ROLE_INITIATOR)) 2206 ahd_set_transaction_status(scb, CAM_REQ_CMP); 2207#endif 2208 ahd_handle_devreset(ahd, &devinfo, CAM_LUN_WILDCARD, 2209 CAM_BDR_SENT, "Bus Device Reset", 2210 /*verbose_level*/0); 2211 printerror = 0; 2212 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, FALSE) 2213 && ppr_busfree == 0) { 2214 struct ahd_initiator_tinfo *tinfo; 2215 struct ahd_tmode_tstate *tstate; 2216 2217 /* 2218 * PPR Rejected. Try non-ppr negotiation 2219 * and retry command. 2220 */ 2221#ifdef AHD_DEBUG 2222 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2223 printf("PPR negotiation rejected busfree.\n"); 2224#endif 2225 tinfo = ahd_fetch_transinfo(ahd, devinfo.channel, 2226 devinfo.our_scsiid, 2227 devinfo.target, &tstate); 2228 tinfo->curr.transport_version = 2; 2229 tinfo->goal.transport_version = 2; 2230 tinfo->goal.ppr_options = 0; 2231 ahd_qinfifo_requeue_tail(ahd, scb); 2232 printerror = 0; 2233 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE) 2234 && ppr_busfree == 0) { 2235 /* 2236 * Negotiation Rejected. Go-narrow and 2237 * retry command. 2238 */ 2239#ifdef AHD_DEBUG 2240 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2241 printf("WDTR Negotiation rejected busfree.\n"); 2242#endif 2243 ahd_set_width(ahd, &devinfo, 2244 MSG_EXT_WDTR_BUS_8_BIT, 2245 AHD_TRANS_CUR|AHD_TRANS_GOAL, 2246 /*paused*/TRUE); 2247 ahd_qinfifo_requeue_tail(ahd, scb); 2248 printerror = 0; 2249 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE) 2250 && ppr_busfree == 0) { 2251 /* 2252 * Negotiation Rejected. Go-async and 2253 * retry command. 2254 */ 2255#ifdef AHD_DEBUG 2256 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2257 printf("SDTR negotiation rejected busfree.\n"); 2258#endif 2259 ahd_set_syncrate(ahd, &devinfo, 2260 /*period*/0, /*offset*/0, 2261 /*ppr_options*/0, 2262 AHD_TRANS_CUR|AHD_TRANS_GOAL, 2263 /*paused*/TRUE); 2264 ahd_qinfifo_requeue_tail(ahd, scb); 2265 printerror = 0; 2266 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0 2267 && ahd_sent_msg(ahd, AHDMSG_1B, 2268 MSG_INITIATOR_DET_ERR, TRUE)) { 2269 2270#ifdef AHD_DEBUG 2271 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2272 printf("Expected IDE Busfree\n"); 2273#endif 2274 printerror = 0; 2275 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_QASREJ_BUSFREE) 2276 && ahd_sent_msg(ahd, AHDMSG_1B, 2277 MSG_MESSAGE_REJECT, TRUE)) { 2278 2279#ifdef AHD_DEBUG 2280 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2281 printf("Expected QAS Reject Busfree\n"); 2282#endif 2283 printerror = 0; 2284 } 2285 } 2286 2287 /* 2288 * The busfree required flag is honored at the end of 2289 * the message phases. We check it last in case we 2290 * had to send some other message that caused a busfree. 2291 */ 2292 if (printerror != 0 2293 && (lastphase == P_MESGIN || lastphase == P_MESGOUT) 2294 && ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) { 2295 2296 ahd_freeze_devq(ahd, scb); 2297 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ); 2298 ahd_freeze_scb(scb); 2299 if ((ahd->msg_flags & MSG_FLAG_IU_REQ_CHANGED) != 0) { 2300 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 2301 SCB_GET_CHANNEL(ahd, scb), 2302 SCB_GET_LUN(scb), SCB_LIST_NULL, 2303 ROLE_INITIATOR, CAM_REQ_ABORTED); 2304 } else { 2305#ifdef AHD_DEBUG 2306 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2307 printf("PPR Negotiation Busfree.\n"); 2308#endif 2309 ahd_done(ahd, scb); 2310 } 2311 printerror = 0; 2312 } 2313 if (printerror != 0) { 2314 int aborted; 2315 2316 aborted = 0; 2317 if (scb != NULL) { 2318 u_int tag; 2319 2320 if ((scb->hscb->control & TAG_ENB) != 0) 2321 tag = SCB_GET_TAG(scb); 2322 else 2323 tag = SCB_LIST_NULL; 2324 ahd_print_path(ahd, scb); 2325 aborted = ahd_abort_scbs(ahd, target, 'A', 2326 SCB_GET_LUN(scb), tag, 2327 ROLE_INITIATOR, 2328 CAM_UNEXP_BUSFREE); 2329 } else { 2330 /* 2331 * We had not fully identified this connection, 2332 * so we cannot abort anything. 2333 */ 2334 printf("%s: ", ahd_name(ahd)); 2335 } 2336 if (lastphase != P_BUSFREE) 2337 ahd_force_renegotiation(ahd, &devinfo); 2338 printf("Unexpected busfree %s, %d SCBs aborted, " 2339 "PRGMCNT == 0x%x\n", 2340 ahd_lookup_phase_entry(lastphase)->phasemsg, 2341 aborted, 2342 ahd_inb(ahd, PRGMCNT) 2343 | (ahd_inb(ahd, PRGMCNT+1) << 8)); 2344 ahd_dump_card_state(ahd); 2345 } 2346 /* Always restart the sequencer. */ 2347 return (1); 2348} 2349 2350static void 2351ahd_handle_proto_violation(struct ahd_softc *ahd) 2352{ 2353 struct ahd_devinfo devinfo; 2354 struct scb *scb; 2355 u_int scbid; 2356 u_int seq_flags; 2357 u_int curphase; 2358 u_int lastphase; 2359 int found; 2360 2361 ahd_fetch_devinfo(ahd, &devinfo); 2362 scbid = ahd_get_scbptr(ahd); 2363 scb = ahd_lookup_scb(ahd, scbid); 2364 seq_flags = ahd_inb(ahd, SEQ_FLAGS); 2365 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 2366 lastphase = ahd_inb(ahd, LASTPHASE); 2367 if ((seq_flags & NOT_IDENTIFIED) != 0) { 2368 2369 /* 2370 * The reconnecting target either did not send an 2371 * identify message, or did, but we didn't find an SCB 2372 * to match. 2373 */ 2374 ahd_print_devinfo(ahd, &devinfo); 2375 printf("Target did not send an IDENTIFY message. " 2376 "LASTPHASE = 0x%x.\n", lastphase); 2377 scb = NULL; 2378 } else if (scb == NULL) { 2379 /* 2380 * We don't seem to have an SCB active for this 2381 * transaction. Print an error and reset the bus. 2382 */ 2383 ahd_print_devinfo(ahd, &devinfo); 2384 printf("No SCB found during protocol violation\n"); 2385 goto proto_violation_reset; 2386 } else { 2387 ahd_set_transaction_status(scb, CAM_SEQUENCE_FAIL); 2388 if ((seq_flags & NO_CDB_SENT) != 0) { 2389 ahd_print_path(ahd, scb); 2390 printf("No or incomplete CDB sent to device.\n"); 2391 } else if ((ahd_inb_scbram(ahd, SCB_CONTROL) 2392 & STATUS_RCVD) == 0) { 2393 /* 2394 * The target never bothered to provide status to 2395 * us prior to completing the command. Since we don't 2396 * know the disposition of this command, we must attempt 2397 * to abort it. Assert ATN and prepare to send an abort 2398 * message. 2399 */ 2400 ahd_print_path(ahd, scb); 2401 printf("Completed command without status.\n"); 2402 } else { 2403 ahd_print_path(ahd, scb); 2404 printf("Unknown protocol violation.\n"); 2405 ahd_dump_card_state(ahd); 2406 } 2407 } 2408 if ((lastphase & ~P_DATAIN_DT) == 0 2409 || lastphase == P_COMMAND) { 2410proto_violation_reset: 2411 /* 2412 * Target either went directly to data 2413 * phase or didn't respond to our ATN. 2414 * The only safe thing to do is to blow 2415 * it away with a bus reset. 2416 */ 2417 found = ahd_reset_channel(ahd, 'A', TRUE); 2418 printf("%s: Issued Channel %c Bus Reset. " 2419 "%d SCBs aborted\n", ahd_name(ahd), 'A', found); 2420 } else { 2421 /* 2422 * Leave the selection hardware off in case 2423 * this abort attempt will affect yet to 2424 * be sent commands. 2425 */ 2426 ahd_outb(ahd, SCSISEQ0, 2427 ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 2428 ahd_assert_atn(ahd); 2429 ahd_outb(ahd, MSG_OUT, HOST_MSG); 2430 if (scb == NULL) { 2431 ahd_print_devinfo(ahd, &devinfo); 2432 ahd->msgout_buf[0] = MSG_ABORT_TASK; 2433 ahd->msgout_len = 1; 2434 ahd->msgout_index = 0; 2435 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 2436 } else { 2437 ahd_print_path(ahd, scb); 2438 scb->flags |= SCB_ABORT; 2439 } 2440 printf("Protocol violation %s. Attempting to abort.\n", 2441 ahd_lookup_phase_entry(curphase)->phasemsg); 2442 } 2443} 2444 2445/* 2446 * Force renegotiation to occur the next time we initiate 2447 * a command to the current device. 2448 */ 2449static void 2450ahd_force_renegotiation(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 2451{ 2452 struct ahd_initiator_tinfo *targ_info; 2453 struct ahd_tmode_tstate *tstate; 2454 2455#ifdef AHD_DEBUG 2456 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 2457 ahd_print_devinfo(ahd, devinfo); 2458 printf("Forcing renegotiation\n"); 2459 } 2460#endif 2461 targ_info = ahd_fetch_transinfo(ahd, 2462 devinfo->channel, 2463 devinfo->our_scsiid, 2464 devinfo->target, 2465 &tstate); 2466 ahd_update_neg_request(ahd, devinfo, tstate, 2467 targ_info, AHD_NEG_IF_NON_ASYNC); 2468} 2469 2470#define AHD_MAX_STEPS 2000 2471void 2472ahd_clear_critical_section(struct ahd_softc *ahd) 2473{ 2474 ahd_mode_state saved_modes; 2475 int stepping; 2476 int steps; 2477 int first_instr; 2478 u_int simode0; 2479 u_int simode1; 2480 u_int simode3; 2481 u_int lqimode0; 2482 u_int lqimode1; 2483 u_int lqomode0; 2484 u_int lqomode1; 2485 2486 if (ahd->num_critical_sections == 0) 2487 return; 2488 2489 stepping = FALSE; 2490 steps = 0; 2491 first_instr = 0; 2492 simode0 = 0; 2493 simode1 = 0; 2494 simode3 = 0; 2495 lqimode0 = 0; 2496 lqimode1 = 0; 2497 lqomode0 = 0; 2498 lqomode1 = 0; 2499 saved_modes = ahd_save_modes(ahd); 2500 for (;;) { 2501 struct cs *cs; 2502 u_int seqaddr; 2503 u_int i; 2504 2505 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2506 seqaddr = ahd_inb(ahd, CURADDR) 2507 | (ahd_inb(ahd, CURADDR+1) << 8); 2508 2509 cs = ahd->critical_sections; 2510 for (i = 0; i < ahd->num_critical_sections; i++, cs++) { 2511 2512 if (cs->begin < seqaddr && cs->end >= seqaddr) 2513 break; 2514 } 2515 2516 if (i == ahd->num_critical_sections) 2517 break; 2518 2519 if (steps > AHD_MAX_STEPS) { 2520 printf("%s: Infinite loop in critical section\n" 2521 "%s: First Instruction 0x%x now 0x%x\n", 2522 ahd_name(ahd), ahd_name(ahd), first_instr, 2523 seqaddr); 2524 ahd_dump_card_state(ahd); 2525 panic("critical section loop"); 2526 } 2527 2528 steps++; 2529#ifdef AHD_DEBUG 2530 if ((ahd_debug & AHD_SHOW_MISC) != 0) 2531 printf("%s: Single stepping at 0x%x\n", ahd_name(ahd), 2532 seqaddr); 2533#endif 2534 if (stepping == FALSE) { 2535 2536 first_instr = seqaddr; 2537 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 2538 simode0 = ahd_inb(ahd, SIMODE0); 2539 simode3 = ahd_inb(ahd, SIMODE3); 2540 lqimode0 = ahd_inb(ahd, LQIMODE0); 2541 lqimode1 = ahd_inb(ahd, LQIMODE1); 2542 lqomode0 = ahd_inb(ahd, LQOMODE0); 2543 lqomode1 = ahd_inb(ahd, LQOMODE1); 2544 ahd_outb(ahd, SIMODE0, 0); 2545 ahd_outb(ahd, SIMODE3, 0); 2546 ahd_outb(ahd, LQIMODE0, 0); 2547 ahd_outb(ahd, LQIMODE1, 0); 2548 ahd_outb(ahd, LQOMODE0, 0); 2549 ahd_outb(ahd, LQOMODE1, 0); 2550 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2551 simode1 = ahd_inb(ahd, SIMODE1); 2552 /* 2553 * We don't clear ENBUSFREE. Unfortunately 2554 * we cannot re-enable busfree detection within 2555 * the current connection, so we must leave it 2556 * on while single stepping. 2557 */ 2558 ahd_outb(ahd, SIMODE1, simode1 & ENBUSFREE); 2559 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) | STEP); 2560 stepping = TRUE; 2561 } 2562 ahd_outb(ahd, CLRSINT1, CLRBUSFREE); 2563 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2564 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode); 2565 ahd_outb(ahd, HCNTRL, ahd->unpause); 2566 while (!ahd_is_paused(ahd)) 2567 ahd_delay(200); 2568 ahd_update_modes(ahd); 2569 } 2570 if (stepping) { 2571 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 2572 ahd_outb(ahd, SIMODE0, simode0); 2573 ahd_outb(ahd, SIMODE3, simode3); 2574 ahd_outb(ahd, LQIMODE0, lqimode0); 2575 ahd_outb(ahd, LQIMODE1, lqimode1); 2576 ahd_outb(ahd, LQOMODE0, lqomode0); 2577 ahd_outb(ahd, LQOMODE1, lqomode1); 2578 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2579 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP); 2580 ahd_outb(ahd, SIMODE1, simode1); 2581 /* 2582 * SCSIINT seems to glitch occasionally when 2583 * the interrupt masks are restored. Clear SCSIINT 2584 * one more time so that only persistent errors 2585 * are seen as a real interrupt. 2586 */ 2587 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2588 } 2589 ahd_restore_modes(ahd, saved_modes); 2590} 2591 2592/* 2593 * Clear any pending interrupt status. 2594 */ 2595void 2596ahd_clear_intstat(struct ahd_softc *ahd) 2597{ 2598 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 2599 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 2600 /* Clear any interrupt conditions this may have caused */ 2601 ahd_outb(ahd, CLRLQIINT0, CLRLQIATNQAS|CLRLQICRCT1|CLRLQICRCT2 2602 |CLRLQIBADLQT|CLRLQIATNLQ|CLRLQIATNCMD); 2603 ahd_outb(ahd, CLRLQIINT1, CLRLQIPHASE_LQ|CLRLQIPHASE_NLQ|CLRLIQABORT 2604 |CLRLQICRCI_LQ|CLRLQICRCI_NLQ|CLRLQIBADLQI 2605 |CLRLQIOVERI_LQ|CLRLQIOVERI_NLQ|CLRNONPACKREQ); 2606 ahd_outb(ahd, CLRLQOINT0, CLRLQOTARGSCBPERR|CLRLQOSTOPT2|CLRLQOATNLQ 2607 |CLRLQOATNPKT|CLRLQOTCRC); 2608 ahd_outb(ahd, CLRLQOINT1, CLRLQOINITSCBPERR|CLRLQOSTOPI2|CLRLQOBADQAS 2609 |CLRLQOBUSFREE|CLRLQOPHACHGINPKT); 2610 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { 2611 ahd_outb(ahd, CLRLQOINT0, 0); 2612 ahd_outb(ahd, CLRLQOINT1, 0); 2613 } 2614 ahd_outb(ahd, CLRSINT3, CLRNTRAMPERR|CLROSRAMPERR); 2615 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI 2616 |CLRBUSFREE|CLRSCSIPERR|CLRREQINIT); 2617 ahd_outb(ahd, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO 2618 |CLRIOERR|CLROVERRUN); 2619 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2620} 2621 2622/**************************** Debugging Routines ******************************/ 2623#ifdef AHD_DEBUG 2624uint32_t ahd_debug = AHD_DEBUG_OPTS; 2625#endif 2626void 2627ahd_print_scb(struct scb *scb) 2628{ 2629 struct hardware_scb *hscb; 2630 int i; 2631 2632 hscb = scb->hscb; 2633 printf("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n", 2634 (void *)scb, 2635 hscb->control, 2636 hscb->scsiid, 2637 hscb->lun, 2638 hscb->cdb_len); 2639 printf("Shared Data: "); 2640 for (i = 0; i < sizeof(hscb->shared_data.idata.cdb); i++) 2641 printf("%#02x", hscb->shared_data.idata.cdb[i]); 2642 printf(" dataptr:%#x%x datacnt:%#x sgptr:%#x tag:%#x\n", 2643 (uint32_t)((ahd_le64toh(hscb->dataptr) >> 32) & 0xFFFFFFFF), 2644 (uint32_t)(ahd_le64toh(hscb->dataptr) & 0xFFFFFFFF), 2645 ahd_le32toh(hscb->datacnt), 2646 ahd_le32toh(hscb->sgptr), 2647 SCB_GET_TAG(scb)); 2648 ahd_dump_sglist(scb); 2649} 2650 2651void 2652ahd_dump_sglist(struct scb *scb) 2653{ 2654 int i; 2655 2656 if (scb->sg_count > 0) { 2657 if ((scb->ahd_softc->flags & AHD_64BIT_ADDRESSING) != 0) { 2658 struct ahd_dma64_seg *sg_list; 2659 2660 sg_list = (struct ahd_dma64_seg*)scb->sg_list; 2661 for (i = 0; i < scb->sg_count; i++) { 2662 uint64_t addr; 2663 2664 addr = ahd_le64toh(sg_list[i].addr); 2665 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n", 2666 i, 2667 (uint32_t)((addr >> 32) & 0xFFFFFFFF), 2668 (uint32_t)(addr & 0xFFFFFFFF), 2669 sg_list[i].len & AHD_SG_LEN_MASK, 2670 (sg_list[i].len & AHD_DMA_LAST_SEG) 2671 ? " Last" : ""); 2672 } 2673 } else { 2674 struct ahd_dma_seg *sg_list; 2675 2676 sg_list = (struct ahd_dma_seg*)scb->sg_list; 2677 for (i = 0; i < scb->sg_count; i++) { 2678 uint32_t len; 2679 2680 len = ahd_le32toh(sg_list[i].len); 2681 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n", 2682 i, 2683 (len & AHD_SG_HIGH_ADDR_MASK) >> 24, 2684 ahd_le32toh(sg_list[i].addr), 2685 len & AHD_SG_LEN_MASK, 2686 len & AHD_DMA_LAST_SEG ? " Last" : ""); 2687 } 2688 } 2689 } 2690} 2691 2692/************************* Transfer Negotiation *******************************/ 2693/* 2694 * Allocate per target mode instance (ID we respond to as a target) 2695 * transfer negotiation data structures. 2696 */ 2697static struct ahd_tmode_tstate * 2698ahd_alloc_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel) 2699{ 2700 struct ahd_tmode_tstate *master_tstate; 2701 struct ahd_tmode_tstate *tstate; 2702 int i; 2703 2704 master_tstate = ahd->enabled_targets[ahd->our_id]; 2705 if (ahd->enabled_targets[scsi_id] != NULL 2706 && ahd->enabled_targets[scsi_id] != master_tstate) 2707 panic("%s: ahd_alloc_tstate - Target already allocated", 2708 ahd_name(ahd)); 2709 tstate = malloc(sizeof(*tstate), M_DEVBUF, M_WAITOK | M_ZERO); 2710 2711 /* 2712 * If we have allocated a master tstate, copy user settings from 2713 * the master tstate (taken from SRAM or the EEPROM) for this 2714 * channel, but reset our current and goal settings to async/narrow 2715 * until an initiator talks to us. 2716 */ 2717 if (master_tstate != NULL) { 2718 memcpy(tstate, master_tstate, sizeof(*tstate)); 2719 memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns)); 2720 for (i = 0; i < 16; i++) { 2721 memset(&tstate->transinfo[i].curr, 0, 2722 sizeof(tstate->transinfo[i].curr)); 2723 memset(&tstate->transinfo[i].goal, 0, 2724 sizeof(tstate->transinfo[i].goal)); 2725 } 2726 } else 2727 memset(tstate, 0, sizeof(*tstate)); 2728 ahd->enabled_targets[scsi_id] = tstate; 2729 return (tstate); 2730} 2731 2732#ifdef AHD_TARGET_MODE 2733/* 2734 * Free per target mode instance (ID we respond to as a target) 2735 * transfer negotiation data structures. 2736 */ 2737static void 2738ahd_free_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel, int force) 2739{ 2740 struct ahd_tmode_tstate *tstate; 2741 2742 /* 2743 * Don't clean up our "master" tstate. 2744 * It has our default user settings. 2745 */ 2746 if (scsi_id == ahd->our_id 2747 && force == FALSE) 2748 return; 2749 2750 tstate = ahd->enabled_targets[scsi_id]; 2751 if (tstate != NULL) 2752 free(tstate, M_DEVBUF); 2753 ahd->enabled_targets[scsi_id] = NULL; 2754} 2755#endif 2756 2757/* 2758 * Called when we have an active connection to a target on the bus, 2759 * this function finds the nearest period to the input period limited 2760 * by the capabilities of the bus connectivity of and sync settings for 2761 * the target. 2762 */ 2763void 2764ahd_devlimited_syncrate(struct ahd_softc *ahd, 2765 struct ahd_initiator_tinfo *tinfo, 2766 u_int *period, u_int *ppr_options, role_t role) 2767{ 2768 struct ahd_transinfo *transinfo; 2769 u_int maxsync; 2770 2771 if ((ahd_inb(ahd, SBLKCTL) & ENAB40) != 0 2772 && (ahd_inb(ahd, SSTAT2) & EXP_ACTIVE) == 0) { 2773 maxsync = AHD_SYNCRATE_PACED; 2774 } else { 2775 maxsync = AHD_SYNCRATE_ULTRA; 2776 /* Can't do DT related options on an SE bus */ 2777 *ppr_options &= MSG_EXT_PPR_QAS_REQ; 2778 } 2779 /* 2780 * Never allow a value higher than our current goal 2781 * period otherwise we may allow a target initiated 2782 * negotiation to go above the limit as set by the 2783 * user. In the case of an initiator initiated 2784 * sync negotiation, we limit based on the user 2785 * setting. This allows the system to still accept 2786 * incoming negotiations even if target initiated 2787 * negotiation is not performed. 2788 */ 2789 if (role == ROLE_TARGET) 2790 transinfo = &tinfo->user; 2791 else 2792 transinfo = &tinfo->goal; 2793 *ppr_options &= (transinfo->ppr_options|MSG_EXT_PPR_PCOMP_EN); 2794 if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) { 2795 maxsync = MAX(maxsync, AHD_SYNCRATE_ULTRA2); 2796 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2797 } 2798 if (transinfo->period == 0) { 2799 *period = 0; 2800 *ppr_options = 0; 2801 } else { 2802 *period = MAX(*period, transinfo->period); 2803 ahd_find_syncrate(ahd, period, ppr_options, maxsync); 2804 } 2805} 2806 2807/* 2808 * Look up the valid period to SCSIRATE conversion in our table. 2809 * Return the period and offset that should be sent to the target 2810 * if this was the beginning of an SDTR. 2811 */ 2812void 2813ahd_find_syncrate(struct ahd_softc *ahd, u_int *period, 2814 u_int *ppr_options, u_int maxsync) 2815{ 2816 if (*period < maxsync) 2817 *period = maxsync; 2818 2819 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) != 0 2820 && *period > AHD_SYNCRATE_MIN_DT) 2821 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2822 2823 if (*period > AHD_SYNCRATE_MIN) 2824 *period = 0; 2825 2826 /* Honor PPR option conformance rules. */ 2827 if (*period > AHD_SYNCRATE_PACED) 2828 *ppr_options &= ~MSG_EXT_PPR_RTI; 2829 2830 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0) 2831 *ppr_options &= (MSG_EXT_PPR_DT_REQ|MSG_EXT_PPR_QAS_REQ); 2832 2833 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0) 2834 *ppr_options &= MSG_EXT_PPR_QAS_REQ; 2835 2836 /* Skip all PACED only entries if IU is not available */ 2837 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0 2838 && *period < AHD_SYNCRATE_DT) 2839 *period = AHD_SYNCRATE_DT; 2840 2841 /* Skip all DT only entries if DT is not available */ 2842 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0 2843 && *period < AHD_SYNCRATE_ULTRA2) 2844 *period = AHD_SYNCRATE_ULTRA2; 2845} 2846 2847/* 2848 * Truncate the given synchronous offset to a value the 2849 * current adapter type and syncrate are capable of. 2850 */ 2851void 2852ahd_validate_offset(struct ahd_softc *ahd, 2853 struct ahd_initiator_tinfo *tinfo, 2854 u_int period, u_int *offset, int wide, 2855 role_t role) 2856{ 2857 u_int maxoffset; 2858 2859 /* Limit offset to what we can do */ 2860 if (period == 0) 2861 maxoffset = 0; 2862 else if (period <= AHD_SYNCRATE_PACED) { 2863 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) 2864 maxoffset = MAX_OFFSET_PACED_BUG; 2865 else 2866 maxoffset = MAX_OFFSET_PACED; 2867 } else 2868 maxoffset = MAX_OFFSET_NON_PACED; 2869 *offset = MIN(*offset, maxoffset); 2870 if (tinfo != NULL) { 2871 if (role == ROLE_TARGET) 2872 *offset = MIN(*offset, tinfo->user.offset); 2873 else 2874 *offset = MIN(*offset, tinfo->goal.offset); 2875 } 2876} 2877 2878/* 2879 * Truncate the given transfer width parameter to a value the 2880 * current adapter type is capable of. 2881 */ 2882void 2883ahd_validate_width(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo, 2884 u_int *bus_width, role_t role) 2885{ 2886 switch (*bus_width) { 2887 default: 2888 if (ahd->features & AHD_WIDE) { 2889 /* Respond Wide */ 2890 *bus_width = MSG_EXT_WDTR_BUS_16_BIT; 2891 break; 2892 } 2893 /* FALLTHROUGH */ 2894 case MSG_EXT_WDTR_BUS_8_BIT: 2895 *bus_width = MSG_EXT_WDTR_BUS_8_BIT; 2896 break; 2897 } 2898 if (tinfo != NULL) { 2899 if (role == ROLE_TARGET) 2900 *bus_width = MIN(tinfo->user.width, *bus_width); 2901 else 2902 *bus_width = MIN(tinfo->goal.width, *bus_width); 2903 } 2904} 2905 2906/* 2907 * Update the bitmask of targets for which the controller should 2908 * negotiate with at the next convenient opportunity. This currently 2909 * means the next time we send the initial identify messages for 2910 * a new transaction. 2911 */ 2912int 2913ahd_update_neg_request(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 2914 struct ahd_tmode_tstate *tstate, 2915 struct ahd_initiator_tinfo *tinfo, ahd_neg_type neg_type) 2916{ 2917 u_int auto_negotiate_orig; 2918 2919 auto_negotiate_orig = tstate->auto_negotiate; 2920 if (neg_type == AHD_NEG_ALWAYS) { 2921 /* 2922 * Force our "current" settings to be 2923 * unknown so that unless a bus reset 2924 * occurs the need to renegotiate is 2925 * recorded persistently. 2926 */ 2927 if ((ahd->features & AHD_WIDE) != 0) 2928 tinfo->curr.width = AHD_WIDTH_UNKNOWN; 2929 tinfo->curr.period = AHD_PERIOD_UNKNOWN; 2930 tinfo->curr.offset = AHD_OFFSET_UNKNOWN; 2931 } 2932 if (tinfo->curr.period != tinfo->goal.period 2933 || tinfo->curr.width != tinfo->goal.width 2934 || tinfo->curr.offset != tinfo->goal.offset 2935 || tinfo->curr.ppr_options != tinfo->goal.ppr_options 2936 || (neg_type == AHD_NEG_IF_NON_ASYNC 2937 && (tinfo->goal.offset != 0 2938 || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT 2939 || tinfo->goal.ppr_options != 0))) 2940 tstate->auto_negotiate |= devinfo->target_mask; 2941 else 2942 tstate->auto_negotiate &= ~devinfo->target_mask; 2943 2944 return (auto_negotiate_orig != tstate->auto_negotiate); 2945} 2946 2947/* 2948 * Update the user/goal/curr tables of synchronous negotiation 2949 * parameters as well as, in the case of a current or active update, 2950 * any data structures on the host controller. In the case of an 2951 * active update, the specified target is currently talking to us on 2952 * the bus, so the transfer parameter update must take effect 2953 * immediately. 2954 */ 2955void 2956ahd_set_syncrate(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 2957 u_int period, u_int offset, u_int ppr_options, 2958 u_int type, int paused) 2959{ 2960 struct ahd_initiator_tinfo *tinfo; 2961 struct ahd_tmode_tstate *tstate; 2962 u_int old_period; 2963 u_int old_offset; 2964 u_int old_ppr; 2965 int active; 2966 int update_needed; 2967 2968 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE; 2969 update_needed = 0; 2970 2971 if (period == 0 || offset == 0) { 2972 period = 0; 2973 offset = 0; 2974 } 2975 2976 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 2977 devinfo->target, &tstate); 2978 2979 if ((type & AHD_TRANS_USER) != 0) { 2980 tinfo->user.period = period; 2981 tinfo->user.offset = offset; 2982 tinfo->user.ppr_options = ppr_options; 2983 } 2984 2985 if ((type & AHD_TRANS_GOAL) != 0) { 2986 tinfo->goal.period = period; 2987 tinfo->goal.offset = offset; 2988 tinfo->goal.ppr_options = ppr_options; 2989 } 2990 2991 old_period = tinfo->curr.period; 2992 old_offset = tinfo->curr.offset; 2993 old_ppr = tinfo->curr.ppr_options; 2994 2995 if ((type & AHD_TRANS_CUR) != 0 2996 && (old_period != period 2997 || old_offset != offset 2998 || old_ppr != ppr_options)) { 2999 3000 update_needed++; 3001 3002 tinfo->curr.period = period; 3003 tinfo->curr.offset = offset; 3004 tinfo->curr.ppr_options = ppr_options; 3005 3006 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3007 CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL); 3008 3009 if (bootverbose) { 3010 if (offset != 0) { 3011 int options; 3012 3013 printf("%s: target %d synchronous with " 3014 "period = 0x%x, offset = 0x%x", 3015 ahd_name(ahd), devinfo->target, 3016 period, offset); 3017 options = 0; 3018 if ((ppr_options & MSG_EXT_PPR_RD_STRM) != 0) { 3019 printf("(RDSTRM"); 3020 options++; 3021 } 3022 if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0) { 3023 printf("%s", options ? "|DT" : "(DT"); 3024 options++; 3025 } 3026 if ((ppr_options & MSG_EXT_PPR_IU_REQ) != 0) { 3027 printf("%s", options ? "|IU" : "(IU"); 3028 options++; 3029 } 3030 if ((ppr_options & MSG_EXT_PPR_RTI) != 0) { 3031 printf("%s", options ? "|RTI" : "(RTI"); 3032 options++; 3033 } 3034 if ((ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) { 3035 printf("%s", options ? "|QAS" : "(QAS"); 3036 options++; 3037 } 3038 if (options != 0) 3039 printf(")\n"); 3040 else 3041 printf("\n"); 3042 } else { 3043 printf("%s: target %d using " 3044 "asynchronous transfers%s\n", 3045 ahd_name(ahd), devinfo->target, 3046 (ppr_options & MSG_EXT_PPR_QAS_REQ) != 0 3047 ? "(QAS)" : ""); 3048 } 3049 } 3050 } 3051 /* 3052 * Always refresh the neg-table to handle the case of the 3053 * sequencer setting the ENATNO bit for a MK_MESSAGE request. 3054 * We will always renegotiate in that case if this is a 3055 * packetized request. Also manage the busfree expected flag 3056 * from this common routine so that we catch changes due to 3057 * WDTR or SDTR messages. 3058 */ 3059 if ((type & AHD_TRANS_CUR) != 0) { 3060 if (!paused) 3061 ahd_pause(ahd); 3062 ahd_update_neg_table(ahd, devinfo, &tinfo->curr); 3063 if (!paused) 3064 ahd_unpause(ahd); 3065 if (ahd->msg_type != MSG_TYPE_NONE) { 3066 if ((old_ppr & MSG_EXT_PPR_IU_REQ) 3067 != (ppr_options & MSG_EXT_PPR_IU_REQ)) { 3068#ifdef AHD_DEBUG 3069 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3070 ahd_print_devinfo(ahd, devinfo); 3071 printf("Expecting IU Change busfree\n"); 3072 } 3073#endif 3074 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE 3075 | MSG_FLAG_IU_REQ_CHANGED; 3076 } 3077 if ((old_ppr & MSG_EXT_PPR_IU_REQ) != 0) { 3078#ifdef AHD_DEBUG 3079 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3080 printf("PPR with IU_REQ outstanding\n"); 3081#endif 3082 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE; 3083 } 3084 } 3085 } 3086 3087 update_needed += ahd_update_neg_request(ahd, devinfo, tstate, 3088 tinfo, AHD_NEG_TO_GOAL); 3089 3090 if (update_needed && active) 3091 ahd_update_pending_scbs(ahd); 3092} 3093 3094/* 3095 * Update the user/goal/curr tables of wide negotiation 3096 * parameters as well as, in the case of a current or active update, 3097 * any data structures on the host controller. In the case of an 3098 * active update, the specified target is currently talking to us on 3099 * the bus, so the transfer parameter update must take effect 3100 * immediately. 3101 */ 3102void 3103ahd_set_width(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3104 u_int width, u_int type, int paused) 3105{ 3106 struct ahd_initiator_tinfo *tinfo; 3107 struct ahd_tmode_tstate *tstate; 3108 u_int oldwidth; 3109 int active; 3110 int update_needed; 3111 3112 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE; 3113 update_needed = 0; 3114 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3115 devinfo->target, &tstate); 3116 3117 if ((type & AHD_TRANS_USER) != 0) 3118 tinfo->user.width = width; 3119 3120 if ((type & AHD_TRANS_GOAL) != 0) 3121 tinfo->goal.width = width; 3122 3123 oldwidth = tinfo->curr.width; 3124 if ((type & AHD_TRANS_CUR) != 0 && oldwidth != width) { 3125 3126 update_needed++; 3127 3128 tinfo->curr.width = width; 3129 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3130 CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL); 3131 3132 if (bootverbose) { 3133 printf("%s: target %d using %dbit transfers\n", 3134 ahd_name(ahd), devinfo->target, 3135 8 * (0x01 << width)); 3136 } 3137 } 3138 3139 if ((type & AHD_TRANS_CUR) != 0) { 3140 if (!paused) 3141 ahd_pause(ahd); 3142 ahd_update_neg_table(ahd, devinfo, &tinfo->curr); 3143 if (!paused) 3144 ahd_unpause(ahd); 3145 } 3146 3147 update_needed += ahd_update_neg_request(ahd, devinfo, tstate, 3148 tinfo, AHD_NEG_TO_GOAL); 3149 if (update_needed && active) 3150 ahd_update_pending_scbs(ahd); 3151 3152} 3153 3154/* 3155 * Update the current state of tagged queuing for a given target. 3156 */ 3157void 3158ahd_set_tags(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3159 ahd_queue_alg alg) 3160{ 3161 ahd_platform_set_tags(ahd, devinfo, alg); 3162 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3163 devinfo->lun, AC_TRANSFER_NEG, &alg); 3164} 3165 3166static void 3167ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3168 struct ahd_transinfo *tinfo) 3169{ 3170 ahd_mode_state saved_modes; 3171 u_int period; 3172 u_int ppr_opts; 3173 u_int con_opts; 3174 u_int offset; 3175 u_int saved_negoaddr; 3176 uint8_t iocell_opts[sizeof(ahd->iocell_opts)]; 3177 3178 saved_modes = ahd_save_modes(ahd); 3179 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3180 3181 saved_negoaddr = ahd_inb(ahd, NEGOADDR); 3182 ahd_outb(ahd, NEGOADDR, devinfo->target); 3183 period = tinfo->period; 3184 offset = tinfo->offset; 3185 memcpy(iocell_opts, ahd->iocell_opts, sizeof(ahd->iocell_opts)); 3186 ppr_opts = tinfo->ppr_options & (MSG_EXT_PPR_QAS_REQ|MSG_EXT_PPR_DT_REQ 3187 |MSG_EXT_PPR_IU_REQ|MSG_EXT_PPR_RTI); 3188 con_opts = 0; 3189 if (period == 0) 3190 period = AHD_SYNCRATE_ASYNC; 3191 if (period == AHD_SYNCRATE_160) { 3192 3193 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) { 3194 /* 3195 * When the SPI4 spec was finalized, PACE transfers 3196 * was not made a configurable option in the PPR 3197 * message. Instead it is assumed to be enabled for 3198 * any syncrate faster than 80MHz. Nevertheless, 3199 * Harpoon2A4 allows this to be configurable. 3200 * 3201 * Harpoon2A4 also assumes at most 2 data bytes per 3202 * negotiated REQ/ACK offset. Paced transfers take 3203 * 4, so we must adjust our offset. 3204 */ 3205 ppr_opts |= PPROPT_PACE; 3206 offset *= 2; 3207 3208 /* 3209 * Harpoon2A assumed that there would be a 3210 * fallback rate between 160 MHz and 80 MHz, 3211 * so 7 is used as the period factor rather 3212 * than 8 for 160MHz. 3213 */ 3214 period = AHD_SYNCRATE_REVA_160; 3215 } 3216 if ((tinfo->ppr_options & MSG_EXT_PPR_PCOMP_EN) == 0) 3217 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= 3218 ~AHD_PRECOMP_MASK; 3219 } else { 3220 /* 3221 * Precomp should be disabled for non-paced transfers. 3222 */ 3223 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_PRECOMP_MASK; 3224 3225 if ((ahd->features & AHD_NEW_IOCELL_OPTS) != 0 3226 && (ppr_opts & MSG_EXT_PPR_DT_REQ) != 0) { 3227 /* 3228 * Slow down our CRC interval to be 3229 * compatible with devices that can't 3230 * handle a CRC at full speed. 3231 */ 3232 con_opts |= ENSLOWCRC; 3233 } 3234 } 3235 3236 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PRECOMP_SLEW); 3237 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_PRECOMP_SLEW_INDEX]); 3238 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_AMPLITUDE); 3239 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_AMPLITUDE_INDEX]); 3240 3241 ahd_outb(ahd, NEGPERIOD, period); 3242 ahd_outb(ahd, NEGPPROPTS, ppr_opts); 3243 ahd_outb(ahd, NEGOFFSET, offset); 3244 3245 if (tinfo->width == MSG_EXT_WDTR_BUS_16_BIT) 3246 con_opts |= WIDEXFER; 3247 3248 /* 3249 * During packetized transfers, the target will 3250 * give us the opportunity to send command packets 3251 * without us asserting attention. 3252 */ 3253 if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0) 3254 con_opts |= ENAUTOATNO; 3255 ahd_outb(ahd, NEGCONOPTS, con_opts); 3256 ahd_outb(ahd, NEGOADDR, saved_negoaddr); 3257 ahd_restore_modes(ahd, saved_modes); 3258} 3259 3260/* 3261 * When the transfer settings for a connection change, setup for 3262 * negotiation in pending SCBs to effect the change as quickly as 3263 * possible. We also cancel any negotiations that are scheduled 3264 * for inflight SCBs that have not been started yet. 3265 */ 3266static void 3267ahd_update_pending_scbs(struct ahd_softc *ahd) 3268{ 3269 struct scb *pending_scb; 3270 int pending_scb_count; 3271 u_int scb_tag; 3272 int paused; 3273 u_int saved_scbptr; 3274 ahd_mode_state saved_modes; 3275 3276 /* 3277 * Traverse the pending SCB list and ensure that all of the 3278 * SCBs there have the proper settings. We can only safely 3279 * clear the negotiation required flag (setting requires the 3280 * execution queue to be modified) and this is only possible 3281 * if we are not already attempting to select out for this 3282 * SCB. For this reason, all callers only call this routine 3283 * if we are changing the negotiation settings for the currently 3284 * active transaction on the bus. 3285 */ 3286 pending_scb_count = 0; 3287 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) { 3288 struct ahd_devinfo devinfo; 3289 struct hardware_scb *pending_hscb; 3290 struct ahd_tmode_tstate *tstate; 3291 3292 ahd_scb_devinfo(ahd, &devinfo, pending_scb); 3293 (void)ahd_fetch_transinfo(ahd, devinfo.channel, 3294 devinfo.our_scsiid, 3295 devinfo.target, &tstate); 3296 pending_hscb = pending_scb->hscb; 3297 if ((tstate->auto_negotiate & devinfo.target_mask) == 0 3298 && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) { 3299 pending_scb->flags &= ~SCB_AUTO_NEGOTIATE; 3300 pending_hscb->control &= ~MK_MESSAGE; 3301 } 3302 ahd_sync_scb(ahd, pending_scb, 3303 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 3304 pending_scb_count++; 3305 } 3306 3307 if (pending_scb_count == 0) 3308 return; 3309 3310 if (ahd_is_paused(ahd)) { 3311 paused = 1; 3312 } else { 3313 paused = 0; 3314 ahd_pause(ahd); 3315 } 3316 3317 /* 3318 * Force the sequencer to reinitialize the selection for 3319 * the command at the head of the execution queue if it 3320 * has already been setup. The negotiation changes may 3321 * effect whether we select-out with ATN. 3322 */ 3323 saved_modes = ahd_save_modes(ahd); 3324 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3325 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 3326 saved_scbptr = ahd_get_scbptr(ahd); 3327 /* Ensure that the hscbs down on the card match the new information */ 3328 for (scb_tag = 0; scb_tag < ahd->scb_data.maxhscbs; scb_tag++) { 3329 struct hardware_scb *pending_hscb; 3330 u_int control; 3331 3332 pending_scb = ahd_lookup_scb(ahd, scb_tag); 3333 if (pending_scb == NULL) 3334 continue; 3335 ahd_set_scbptr(ahd, scb_tag); 3336 pending_hscb = pending_scb->hscb; 3337 control = ahd_inb_scbram(ahd, SCB_CONTROL); 3338 control &= ~MK_MESSAGE; 3339 control |= pending_hscb->control & MK_MESSAGE; 3340 ahd_outb(ahd, SCB_CONTROL, control); 3341 } 3342 ahd_set_scbptr(ahd, saved_scbptr); 3343 ahd_restore_modes(ahd, saved_modes); 3344 3345 if (paused == 0) 3346 ahd_unpause(ahd); 3347} 3348 3349/**************************** Pathing Information *****************************/ 3350static void 3351ahd_fetch_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3352{ 3353 ahd_mode_state saved_modes; 3354 u_int saved_scsiid; 3355 role_t role; 3356 int our_id; 3357 3358 saved_modes = ahd_save_modes(ahd); 3359 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3360 3361 if (ahd_inb(ahd, SSTAT0) & TARGET) 3362 role = ROLE_TARGET; 3363 else 3364 role = ROLE_INITIATOR; 3365 3366 if (role == ROLE_TARGET 3367 && (ahd_inb(ahd, SEQ_FLAGS) & CMDPHASE_PENDING) != 0) { 3368 /* We were selected, so pull our id from TARGIDIN */ 3369 our_id = ahd_inb(ahd, TARGIDIN) & OID; 3370 } else if (role == ROLE_TARGET) 3371 our_id = ahd_inb(ahd, TOWNID); 3372 else 3373 our_id = ahd_inb(ahd, IOWNID); 3374 3375 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); 3376 ahd_compile_devinfo(devinfo, 3377 our_id, 3378 SCSIID_TARGET(ahd, saved_scsiid), 3379 ahd_inb(ahd, SAVED_LUN), 3380 SCSIID_CHANNEL(ahd, saved_scsiid), 3381 role); 3382 ahd_restore_modes(ahd, saved_modes); 3383} 3384 3385void 3386ahd_print_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3387{ 3388 printf("%s:%c:%d:%d: (0x%x) ", ahd_name(ahd), 'A', 3389 devinfo->target, devinfo->lun, ahd_get_scbptr(ahd)); 3390} 3391 3392struct ahd_phase_table_entry* 3393ahd_lookup_phase_entry(int phase) 3394{ 3395 struct ahd_phase_table_entry *entry; 3396 struct ahd_phase_table_entry *last_entry; 3397 3398 /* 3399 * num_phases doesn't include the default entry which 3400 * will be returned if the phase doesn't match. 3401 */ 3402 last_entry = &ahd_phase_table[num_phases]; 3403 for (entry = ahd_phase_table; entry < last_entry; entry++) { 3404 if (phase == entry->phase) 3405 break; 3406 } 3407 return (entry); 3408} 3409 3410void 3411ahd_compile_devinfo(struct ahd_devinfo *devinfo, u_int our_id, u_int target, 3412 u_int lun, char channel, role_t role) 3413{ 3414 devinfo->our_scsiid = our_id; 3415 devinfo->target = target; 3416 devinfo->lun = lun; 3417 devinfo->target_offset = target; 3418 devinfo->channel = channel; 3419 devinfo->role = role; 3420 if (channel == 'B') 3421 devinfo->target_offset += 8; 3422 devinfo->target_mask = (0x01 << devinfo->target_offset); 3423} 3424 3425static void 3426ahd_scb_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3427 struct scb *scb) 3428{ 3429 role_t role; 3430 int our_id; 3431 3432 our_id = SCSIID_OUR_ID(scb->hscb->scsiid); 3433 role = ROLE_INITIATOR; 3434 if ((scb->hscb->control & TARGET_SCB) != 0) 3435 role = ROLE_TARGET; 3436 ahd_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahd, scb), 3437 SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahd, scb), role); 3438} 3439 3440 3441/************************ Message Phase Processing ****************************/ 3442/* 3443 * When an initiator transaction with the MK_MESSAGE flag either reconnects 3444 * or enters the initial message out phase, we are interrupted. Fill our 3445 * outgoing message buffer with the appropriate message and begin handing 3446 * the message phase(s) manually. 3447 */ 3448static void 3449ahd_setup_initiator_msgout(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3450 struct scb *scb) 3451{ 3452 /* 3453 * To facilitate adding multiple messages together, 3454 * each routine should increment the index and len 3455 * variables instead of setting them explicitly. 3456 */ 3457 ahd->msgout_index = 0; 3458 ahd->msgout_len = 0; 3459 3460 if (ahd_currently_packetized(ahd)) 3461 ahd->msg_flags |= MSG_FLAG_PACKETIZED; 3462 3463 if (ahd->send_msg_perror 3464 && ahd_inb(ahd, MSG_OUT) == HOST_MSG) { 3465 ahd->msgout_buf[ahd->msgout_index++] = ahd->send_msg_perror; 3466 ahd->msgout_len++; 3467 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3468#ifdef AHD_DEBUG 3469 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3470 printf("Setting up for Parity Error delivery\n"); 3471#endif 3472 return; 3473 } else if (scb == NULL) { 3474 printf("%s: WARNING. No pending message for " 3475 "I_T msgin. Issuing NO-OP\n", ahd_name(ahd)); 3476 ahd->msgout_buf[ahd->msgout_index++] = MSG_NOOP; 3477 ahd->msgout_len++; 3478 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3479 return; 3480 } 3481 3482 if ((scb->flags & SCB_DEVICE_RESET) == 0 3483 && (scb->flags & SCB_PACKETIZED) == 0 3484 && ahd_inb(ahd, MSG_OUT) == MSG_IDENTIFYFLAG) { 3485 u_int identify_msg; 3486 3487 identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb); 3488 if ((scb->hscb->control & DISCENB) != 0) 3489 identify_msg |= MSG_IDENTIFY_DISCFLAG; 3490 ahd->msgout_buf[ahd->msgout_index++] = identify_msg; 3491 ahd->msgout_len++; 3492 3493 if ((scb->hscb->control & TAG_ENB) != 0) { 3494 ahd->msgout_buf[ahd->msgout_index++] = 3495 scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE); 3496 ahd->msgout_buf[ahd->msgout_index++] = SCB_GET_TAG(scb); 3497 ahd->msgout_len += 2; 3498 } 3499 } 3500 3501 if (scb->flags & SCB_DEVICE_RESET) { 3502 ahd->msgout_buf[ahd->msgout_index++] = MSG_BUS_DEV_RESET; 3503 ahd->msgout_len++; 3504 ahd_print_path(ahd, scb); 3505 printf("Bus Device Reset Message Sent\n"); 3506 /* 3507 * Clear our selection hardware in advance of 3508 * the busfree. We may have an entry in the waiting 3509 * Q for this target, and we don't want to go about 3510 * selecting while we handle the busfree and blow it 3511 * away. 3512 */ 3513 ahd_outb(ahd, SCSISEQ0, 0); 3514 } else if ((scb->flags & SCB_ABORT) != 0) { 3515 3516 if ((scb->hscb->control & TAG_ENB) != 0) { 3517 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT_TAG; 3518 } else { 3519 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT; 3520 } 3521 ahd->msgout_len++; 3522 ahd_print_path(ahd, scb); 3523 printf("Abort%s Message Sent\n", 3524 (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : ""); 3525 /* 3526 * Clear our selection hardware in advance of 3527 * the busfree. We may have an entry in the waiting 3528 * Q for this target, and we don't want to go about 3529 * selecting while we handle the busfree and blow it 3530 * away. 3531 */ 3532 ahd_outb(ahd, SCSISEQ0, 0); 3533 } else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) { 3534 ahd_build_transfer_msg(ahd, devinfo); 3535 /* 3536 * Clear our selection hardware in advance of potential 3537 * PPR IU status change busfree. We may have an entry in 3538 * the waiting Q for this target, and we don't want to go 3539 * about selecting while we handle the busfree and blow 3540 * it away. 3541 */ 3542 ahd_outb(ahd, SCSISEQ0, 0); 3543 } else { 3544 printf("ahd_intr: AWAITING_MSG for an SCB that " 3545 "does not have a waiting message\n"); 3546 printf("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid, 3547 devinfo->target_mask); 3548 panic("SCB = %d, SCB Control = %x:%x, MSG_OUT = %x " 3549 "SCB flags = %x", SCB_GET_TAG(scb), scb->hscb->control, 3550 ahd_inb_scbram(ahd, SCB_CONTROL), ahd_inb(ahd, MSG_OUT), 3551 scb->flags); 3552 } 3553 3554 /* 3555 * Clear the MK_MESSAGE flag from the SCB so we aren't 3556 * asked to send this message again. 3557 */ 3558 ahd_outb(ahd, SCB_CONTROL, 3559 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE); 3560 scb->hscb->control &= ~MK_MESSAGE; 3561 ahd->msgout_index = 0; 3562 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3563} 3564 3565/* 3566 * Build an appropriate transfer negotiation message for the 3567 * currently active target. 3568 */ 3569static void 3570ahd_build_transfer_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3571{ 3572 /* 3573 * We need to initiate transfer negotiations. 3574 * If our current and goal settings are identical, 3575 * we want to renegotiate due to a check condition. 3576 */ 3577 struct ahd_initiator_tinfo *tinfo; 3578 struct ahd_tmode_tstate *tstate; 3579 int dowide; 3580 int dosync; 3581 int doppr; 3582 u_int period; 3583 u_int ppr_options; 3584 u_int offset; 3585 3586 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3587 devinfo->target, &tstate); 3588 /* 3589 * Filter our period based on the current connection. 3590 * If we can't perform DT transfers on this segment (not in LVD 3591 * mode for instance), then our decision to issue a PPR message 3592 * may change. 3593 */ 3594 period = tinfo->goal.period; 3595 offset = tinfo->goal.offset; 3596 ppr_options = tinfo->goal.ppr_options; 3597 /* Target initiated PPR is not allowed in the SCSI spec */ 3598 if (devinfo->role == ROLE_TARGET) 3599 ppr_options = 0; 3600 ahd_devlimited_syncrate(ahd, tinfo, &period, 3601 &ppr_options, devinfo->role); 3602 dowide = tinfo->curr.width != tinfo->goal.width; 3603 dosync = tinfo->curr.offset != offset || tinfo->curr.period != period; 3604 /* 3605 * Only use PPR if we have options that need it, even if the device 3606 * claims to support it. There might be an expander in the way 3607 * that doesn't. 3608 */ 3609 doppr = ppr_options != 0; 3610 3611 if (!dowide && !dosync && !doppr) { 3612 dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT; 3613 dosync = tinfo->goal.offset != 0; 3614 } 3615 3616 if (!dowide && !dosync && !doppr) { 3617 /* 3618 * Force async with a WDTR message if we have a wide bus, 3619 * or just issue an SDTR with a 0 offset. 3620 */ 3621 if ((ahd->features & AHD_WIDE) != 0) 3622 dowide = 1; 3623 else 3624 dosync = 1; 3625 3626 if (bootverbose) { 3627 ahd_print_devinfo(ahd, devinfo); 3628 printf("Ensuring async\n"); 3629 } 3630 } 3631 /* Target initiated PPR is not allowed in the SCSI spec */ 3632 if (devinfo->role == ROLE_TARGET) 3633 doppr = 0; 3634 3635 /* 3636 * Both the PPR message and SDTR message require the 3637 * goal syncrate to be limited to what the target device 3638 * is capable of handling (based on whether an LVD->SE 3639 * expander is on the bus), so combine these two cases. 3640 * Regardless, guarantee that if we are using WDTR and SDTR 3641 * messages that WDTR comes first. 3642 */ 3643 if (doppr || (dosync && !dowide)) { 3644 3645 offset = tinfo->goal.offset; 3646 ahd_validate_offset(ahd, tinfo, period, &offset, 3647 doppr ? tinfo->goal.width 3648 : tinfo->curr.width, 3649 devinfo->role); 3650 if (doppr) { 3651 ahd_construct_ppr(ahd, devinfo, period, offset, 3652 tinfo->goal.width, ppr_options); 3653 } else { 3654 ahd_construct_sdtr(ahd, devinfo, period, offset); 3655 } 3656 } else { 3657 ahd_construct_wdtr(ahd, devinfo, tinfo->goal.width); 3658 } 3659} 3660 3661/* 3662 * Build a synchronous negotiation message in our message 3663 * buffer based on the input parameters. 3664 */ 3665static void 3666ahd_construct_sdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3667 u_int period, u_int offset) 3668{ 3669 if (offset == 0) 3670 period = AHD_ASYNC_XFER_PERIOD; 3671 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3672 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_SDTR_LEN; 3673 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_SDTR; 3674 ahd->msgout_buf[ahd->msgout_index++] = period; 3675 ahd->msgout_buf[ahd->msgout_index++] = offset; 3676 ahd->msgout_len += 5; 3677 if (bootverbose) { 3678 printf("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n", 3679 ahd_name(ahd), devinfo->channel, devinfo->target, 3680 devinfo->lun, period, offset); 3681 } 3682} 3683 3684/* 3685 * Build a wide negotiation message in our message 3686 * buffer based on the input parameters. 3687 */ 3688static void 3689ahd_construct_wdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3690 u_int bus_width) 3691{ 3692 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3693 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_WDTR_LEN; 3694 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_WDTR; 3695 ahd->msgout_buf[ahd->msgout_index++] = bus_width; 3696 ahd->msgout_len += 4; 3697 if (bootverbose) { 3698 printf("(%s:%c:%d:%d): Sending WDTR %x\n", 3699 ahd_name(ahd), devinfo->channel, devinfo->target, 3700 devinfo->lun, bus_width); 3701 } 3702} 3703 3704/* 3705 * Build a parallel protocol request message in our message 3706 * buffer based on the input parameters. 3707 */ 3708static void 3709ahd_construct_ppr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3710 u_int period, u_int offset, u_int bus_width, 3711 u_int ppr_options) 3712{ 3713 /* 3714 * Always request precompensation from 3715 * the other target if we are running 3716 * at paced syncrates. 3717 */ 3718 if (period <= AHD_SYNCRATE_PACED) 3719 ppr_options |= MSG_EXT_PPR_PCOMP_EN; 3720 if (offset == 0) 3721 period = AHD_ASYNC_XFER_PERIOD; 3722 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3723 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_PPR_LEN; 3724 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_PPR; 3725 ahd->msgout_buf[ahd->msgout_index++] = period; 3726 ahd->msgout_buf[ahd->msgout_index++] = 0; 3727 ahd->msgout_buf[ahd->msgout_index++] = offset; 3728 ahd->msgout_buf[ahd->msgout_index++] = bus_width; 3729 ahd->msgout_buf[ahd->msgout_index++] = ppr_options; 3730 ahd->msgout_len += 8; 3731 if (bootverbose) { 3732 printf("(%s:%c:%d:%d): Sending PPR bus_width %x, period 0x%x, " 3733 "offset 0x%x, ppr_options 0x%x\n", ahd_name(ahd), 3734 devinfo->channel, devinfo->target, devinfo->lun, 3735 bus_width, period, offset, ppr_options); 3736 } 3737} 3738 3739/* 3740 * Clear any active message state. 3741 */ 3742static void 3743ahd_clear_msg_state(struct ahd_softc *ahd) 3744{ 3745 ahd_mode_state saved_modes; 3746 3747 saved_modes = ahd_save_modes(ahd); 3748 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3749 ahd->send_msg_perror = 0; 3750 ahd->msg_flags = MSG_FLAG_NONE; 3751 ahd->msgout_len = 0; 3752 ahd->msgin_index = 0; 3753 ahd->msg_type = MSG_TYPE_NONE; 3754 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0) { 3755 /* 3756 * The target didn't care to respond to our 3757 * message request, so clear ATN. 3758 */ 3759 ahd_outb(ahd, CLRSINT1, CLRATNO); 3760 } 3761 ahd_outb(ahd, MSG_OUT, MSG_NOOP); 3762 ahd_outb(ahd, SEQ_FLAGS2, 3763 ahd_inb(ahd, SEQ_FLAGS2) & ~TARGET_MSG_PENDING); 3764 ahd_restore_modes(ahd, saved_modes); 3765} 3766 3767/* 3768 * Manual message loop handler. 3769 */ 3770static void 3771ahd_handle_message_phase(struct ahd_softc *ahd) 3772{ 3773 struct ahd_devinfo devinfo; 3774 u_int bus_phase; 3775 int end_session; 3776 3777 ahd_fetch_devinfo(ahd, &devinfo); 3778 end_session = FALSE; 3779 bus_phase = ahd_inb(ahd, LASTPHASE); 3780 3781 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0) { 3782 printf("LQIRETRY for LQIPHASE_OUTPKT\n"); 3783 ahd_outb(ahd, LQCTL2, LQIRETRY); 3784 } 3785reswitch: 3786 switch (ahd->msg_type) { 3787 case MSG_TYPE_INITIATOR_MSGOUT: 3788 { 3789 int lastbyte; 3790 int phasemis; 3791 int msgdone; 3792 3793 if (ahd->msgout_len == 0 && ahd->send_msg_perror == 0) 3794 panic("HOST_MSG_LOOP interrupt with no active message"); 3795 3796#ifdef AHD_DEBUG 3797 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3798 ahd_print_devinfo(ahd, &devinfo); 3799 printf("INITIATOR_MSG_OUT"); 3800 } 3801#endif 3802 phasemis = bus_phase != P_MESGOUT; 3803 if (phasemis) { 3804#ifdef AHD_DEBUG 3805 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3806 printf(" PHASEMIS %s\n", 3807 ahd_lookup_phase_entry(bus_phase) 3808 ->phasemsg); 3809 } 3810#endif 3811 if (bus_phase == P_MESGIN) { 3812 /* 3813 * Change gears and see if 3814 * this messages is of interest to 3815 * us or should be passed back to 3816 * the sequencer. 3817 */ 3818 ahd_outb(ahd, CLRSINT1, CLRATNO); 3819 ahd->send_msg_perror = 0; 3820 ahd->msg_type = MSG_TYPE_INITIATOR_MSGIN; 3821 ahd->msgin_index = 0; 3822 goto reswitch; 3823 } 3824 end_session = TRUE; 3825 break; 3826 } 3827 3828 if (ahd->send_msg_perror) { 3829 ahd_outb(ahd, CLRSINT1, CLRATNO); 3830 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 3831#ifdef AHD_DEBUG 3832 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3833 printf(" byte 0x%x\n", ahd->send_msg_perror); 3834#endif 3835 /* 3836 * If we are notifying the target of a CRC error 3837 * during packetized operations, the target is 3838 * within its rights to acknowledge our message 3839 * with a busfree. 3840 */ 3841 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0 3842 && ahd->send_msg_perror == MSG_INITIATOR_DET_ERR) 3843 ahd->msg_flags |= MSG_FLAG_EXPECT_IDE_BUSFREE; 3844 3845 ahd_outb(ahd, RETURN_2, ahd->send_msg_perror); 3846 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE); 3847 break; 3848 } 3849 3850 msgdone = ahd->msgout_index == ahd->msgout_len; 3851 if (msgdone) { 3852 /* 3853 * The target has requested a retry. 3854 * Re-assert ATN, reset our message index to 3855 * 0, and try again. 3856 */ 3857 ahd->msgout_index = 0; 3858 ahd_assert_atn(ahd); 3859 } 3860 3861 lastbyte = ahd->msgout_index == (ahd->msgout_len - 1); 3862 if (lastbyte) { 3863 /* Last byte is signified by dropping ATN */ 3864 ahd_outb(ahd, CLRSINT1, CLRATNO); 3865 } 3866 3867 /* 3868 * Clear our interrupt status and present 3869 * the next byte on the bus. 3870 */ 3871 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 3872#ifdef AHD_DEBUG 3873 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3874 printf(" byte 0x%x\n", 3875 ahd->msgout_buf[ahd->msgout_index]); 3876#endif 3877 ahd_outb(ahd, RETURN_2, ahd->msgout_buf[ahd->msgout_index++]); 3878 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE); 3879 break; 3880 } 3881 case MSG_TYPE_INITIATOR_MSGIN: 3882 { 3883 int phasemis; 3884 int message_done; 3885 3886#ifdef AHD_DEBUG 3887 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3888 ahd_print_devinfo(ahd, &devinfo); 3889 printf("INITIATOR_MSG_IN"); 3890 } 3891#endif 3892 phasemis = bus_phase != P_MESGIN; 3893 if (phasemis) { 3894#ifdef AHD_DEBUG 3895 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3896 printf(" PHASEMIS %s\n", 3897 ahd_lookup_phase_entry(bus_phase) 3898 ->phasemsg); 3899 } 3900#endif 3901 ahd->msgin_index = 0; 3902 if (bus_phase == P_MESGOUT 3903 && (ahd->send_msg_perror != 0 3904 || (ahd->msgout_len != 0 3905 && ahd->msgout_index == 0))) { 3906 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3907 goto reswitch; 3908 } 3909 end_session = TRUE; 3910 break; 3911 } 3912 3913 /* Pull the byte in without acking it */ 3914 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIBUS); 3915#ifdef AHD_DEBUG 3916 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3917 printf(" byte 0x%x\n", 3918 ahd->msgin_buf[ahd->msgin_index]); 3919#endif 3920 3921 message_done = ahd_parse_msg(ahd, &devinfo); 3922 3923 if (message_done) { 3924 /* 3925 * Clear our incoming message buffer in case there 3926 * is another message following this one. 3927 */ 3928 ahd->msgin_index = 0; 3929 3930 /* 3931 * If this message illicited a response, 3932 * assert ATN so the target takes us to the 3933 * message out phase. 3934 */ 3935 if (ahd->msgout_len != 0) { 3936#ifdef AHD_DEBUG 3937 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3938 ahd_print_devinfo(ahd, &devinfo); 3939 printf("Asserting ATN for response\n"); 3940 } 3941#endif 3942 ahd_assert_atn(ahd); 3943 } 3944 } else 3945 ahd->msgin_index++; 3946 3947 if (message_done == MSGLOOP_TERMINATED) { 3948 end_session = TRUE; 3949 } else { 3950 /* Ack the byte */ 3951 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 3952 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_READ); 3953 } 3954 break; 3955 } 3956 case MSG_TYPE_TARGET_MSGIN: 3957 { 3958 int msgdone; 3959 int msgout_request; 3960 3961 /* 3962 * By default, the message loop will continue. 3963 */ 3964 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG); 3965 3966 if (ahd->msgout_len == 0) 3967 panic("Target MSGIN with no active message"); 3968 3969 /* 3970 * If we interrupted a mesgout session, the initiator 3971 * will not know this until our first REQ. So, we 3972 * only honor mesgout requests after we've sent our 3973 * first byte. 3974 */ 3975 if ((ahd_inb(ahd, SCSISIGI) & ATNI) != 0 3976 && ahd->msgout_index > 0) 3977 msgout_request = TRUE; 3978 else 3979 msgout_request = FALSE; 3980 3981 if (msgout_request) { 3982 3983 /* 3984 * Change gears and see if 3985 * this messages is of interest to 3986 * us or should be passed back to 3987 * the sequencer. 3988 */ 3989 ahd->msg_type = MSG_TYPE_TARGET_MSGOUT; 3990 ahd_outb(ahd, SCSISIGO, P_MESGOUT | BSYO); 3991 ahd->msgin_index = 0; 3992 /* Dummy read to REQ for first byte */ 3993 ahd_inb(ahd, SCSIDAT); 3994 ahd_outb(ahd, SXFRCTL0, 3995 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 3996 break; 3997 } 3998 3999 msgdone = ahd->msgout_index == ahd->msgout_len; 4000 if (msgdone) { 4001 ahd_outb(ahd, SXFRCTL0, 4002 ahd_inb(ahd, SXFRCTL0) & ~SPIOEN); 4003 end_session = TRUE; 4004 break; 4005 } 4006 4007 /* 4008 * Present the next byte on the bus. 4009 */ 4010 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4011 ahd_outb(ahd, SCSIDAT, ahd->msgout_buf[ahd->msgout_index++]); 4012 break; 4013 } 4014 case MSG_TYPE_TARGET_MSGOUT: 4015 { 4016 int lastbyte; 4017 int msgdone; 4018 4019 /* 4020 * By default, the message loop will continue. 4021 */ 4022 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG); 4023 4024 /* 4025 * The initiator signals that this is 4026 * the last byte by dropping ATN. 4027 */ 4028 lastbyte = (ahd_inb(ahd, SCSISIGI) & ATNI) == 0; 4029 4030 /* 4031 * Read the latched byte, but turn off SPIOEN first 4032 * so that we don't inadvertently cause a REQ for the 4033 * next byte. 4034 */ 4035 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) & ~SPIOEN); 4036 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIDAT); 4037 msgdone = ahd_parse_msg(ahd, &devinfo); 4038 if (msgdone == MSGLOOP_TERMINATED) { 4039 /* 4040 * The message is *really* done in that it caused 4041 * us to go to bus free. The sequencer has already 4042 * been reset at this point, so pull the ejection 4043 * handle. 4044 */ 4045 return; 4046 } 4047 4048 ahd->msgin_index++; 4049 4050 /* 4051 * XXX Read spec about initiator dropping ATN too soon 4052 * and use msgdone to detect it. 4053 */ 4054 if (msgdone == MSGLOOP_MSGCOMPLETE) { 4055 ahd->msgin_index = 0; 4056 4057 /* 4058 * If this message illicited a response, transition 4059 * to the Message in phase and send it. 4060 */ 4061 if (ahd->msgout_len != 0) { 4062 ahd_outb(ahd, SCSISIGO, P_MESGIN | BSYO); 4063 ahd_outb(ahd, SXFRCTL0, 4064 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4065 ahd->msg_type = MSG_TYPE_TARGET_MSGIN; 4066 ahd->msgin_index = 0; 4067 break; 4068 } 4069 } 4070 4071 if (lastbyte) 4072 end_session = TRUE; 4073 else { 4074 /* Ask for the next byte. */ 4075 ahd_outb(ahd, SXFRCTL0, 4076 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4077 } 4078 4079 break; 4080 } 4081 default: 4082 panic("Unknown REQINIT message type"); 4083 } 4084 4085 if (end_session) { 4086 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0) { 4087 printf("%s: Returning to Idle Loop\n", 4088 ahd_name(ahd)); 4089 ahd_clear_msg_state(ahd); 4090 4091 /* 4092 * Perform the equivalent of a clear_target_state. 4093 */ 4094 ahd_outb(ahd, LASTPHASE, P_BUSFREE); 4095 ahd_outb(ahd, SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT); 4096 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET); 4097 } else { 4098 ahd_clear_msg_state(ahd); 4099 ahd_outb(ahd, RETURN_1, EXIT_MSG_LOOP); 4100 } 4101 } 4102} 4103 4104/* 4105 * See if we sent a particular extended message to the target. 4106 * If "full" is true, return true only if the target saw the full 4107 * message. If "full" is false, return true if the target saw at 4108 * least the first byte of the message. 4109 */ 4110static int 4111ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, u_int msgval, int full) 4112{ 4113 int found; 4114 u_int index; 4115 4116 found = FALSE; 4117 index = 0; 4118 4119 while (index < ahd->msgout_len) { 4120 if (ahd->msgout_buf[index] == MSG_EXTENDED) { 4121 u_int end_index; 4122 4123 end_index = index + 1 + ahd->msgout_buf[index + 1]; 4124 if (ahd->msgout_buf[index+2] == msgval 4125 && type == AHDMSG_EXT) { 4126 4127 if (full) { 4128 if (ahd->msgout_index > end_index) 4129 found = TRUE; 4130 } else if (ahd->msgout_index > index) 4131 found = TRUE; 4132 } 4133 index = end_index; 4134 } else if (ahd->msgout_buf[index] >= MSG_SIMPLE_TASK 4135 && ahd->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) { 4136 4137 /* Skip tag type and tag id or residue param*/ 4138 index += 2; 4139 } else { 4140 /* Single byte message */ 4141 if (type == AHDMSG_1B 4142 && ahd->msgout_index > index 4143 && (ahd->msgout_buf[index] == msgval 4144 || ((ahd->msgout_buf[index] & MSG_IDENTIFYFLAG) != 0 4145 && msgval == MSG_IDENTIFYFLAG))) 4146 found = TRUE; 4147 index++; 4148 } 4149 4150 if (found) 4151 break; 4152 } 4153 return (found); 4154} 4155 4156/* 4157 * Wait for a complete incoming message, parse it, and respond accordingly. 4158 */ 4159static int 4160ahd_parse_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4161{ 4162 struct ahd_initiator_tinfo *tinfo; 4163 struct ahd_tmode_tstate *tstate; 4164 int reject; 4165 int done; 4166 int response; 4167 4168 done = MSGLOOP_IN_PROG; 4169 response = FALSE; 4170 reject = FALSE; 4171 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 4172 devinfo->target, &tstate); 4173 4174 /* 4175 * Parse as much of the message as is available, 4176 * rejecting it if we don't support it. When 4177 * the entire message is available and has been 4178 * handled, return MSGLOOP_MSGCOMPLETE, indicating 4179 * that we have parsed an entire message. 4180 * 4181 * In the case of extended messages, we accept the length 4182 * byte outright and perform more checking once we know the 4183 * extended message type. 4184 */ 4185 switch (ahd->msgin_buf[0]) { 4186 case MSG_DISCONNECT: 4187 case MSG_SAVEDATAPOINTER: 4188 case MSG_CMDCOMPLETE: 4189 case MSG_RESTOREPOINTERS: 4190 case MSG_IGN_WIDE_RESIDUE: 4191 /* 4192 * End our message loop as these are messages 4193 * the sequencer handles on its own. 4194 */ 4195 done = MSGLOOP_TERMINATED; 4196 break; 4197 case MSG_MESSAGE_REJECT: 4198 response = ahd_handle_msg_reject(ahd, devinfo); 4199 /* FALLTHROUGH */ 4200 case MSG_NOOP: 4201 done = MSGLOOP_MSGCOMPLETE; 4202 break; 4203 case MSG_EXTENDED: 4204 { 4205 /* Wait for enough of the message to begin validation */ 4206 if (ahd->msgin_index < 2) 4207 break; 4208 switch (ahd->msgin_buf[2]) { 4209 case MSG_EXT_SDTR: 4210 { 4211 u_int period; 4212 u_int ppr_options; 4213 u_int offset; 4214 u_int saved_offset; 4215 4216 if (ahd->msgin_buf[1] != MSG_EXT_SDTR_LEN) { 4217 reject = TRUE; 4218 break; 4219 } 4220 4221 /* 4222 * Wait until we have both args before validating 4223 * and acting on this message. 4224 * 4225 * Add one to MSG_EXT_SDTR_LEN to account for 4226 * the extended message preamble. 4227 */ 4228 if (ahd->msgin_index < (MSG_EXT_SDTR_LEN + 1)) 4229 break; 4230 4231 period = ahd->msgin_buf[3]; 4232 ppr_options = 0; 4233 saved_offset = offset = ahd->msgin_buf[4]; 4234 ahd_devlimited_syncrate(ahd, tinfo, &period, 4235 &ppr_options, devinfo->role); 4236 ahd_validate_offset(ahd, tinfo, period, &offset, 4237 tinfo->curr.width, devinfo->role); 4238 if (bootverbose) { 4239 printf("(%s:%c:%d:%d): Received " 4240 "SDTR period %x, offset %x\n\t" 4241 "Filtered to period %x, offset %x\n", 4242 ahd_name(ahd), devinfo->channel, 4243 devinfo->target, devinfo->lun, 4244 ahd->msgin_buf[3], saved_offset, 4245 period, offset); 4246 } 4247 ahd_set_syncrate(ahd, devinfo, period, 4248 offset, ppr_options, 4249 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4250 /*paused*/TRUE); 4251 4252 /* 4253 * See if we initiated Sync Negotiation 4254 * and didn't have to fall down to async 4255 * transfers. 4256 */ 4257 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, TRUE)) { 4258 /* We started it */ 4259 if (saved_offset != offset) { 4260 /* Went too low - force async */ 4261 reject = TRUE; 4262 } 4263 } else { 4264 /* 4265 * Send our own SDTR in reply 4266 */ 4267 if (bootverbose 4268 && devinfo->role == ROLE_INITIATOR) { 4269 printf("(%s:%c:%d:%d): Target " 4270 "Initiated SDTR\n", 4271 ahd_name(ahd), devinfo->channel, 4272 devinfo->target, devinfo->lun); 4273 } 4274 ahd->msgout_index = 0; 4275 ahd->msgout_len = 0; 4276 ahd_construct_sdtr(ahd, devinfo, 4277 period, offset); 4278 ahd->msgout_index = 0; 4279 response = TRUE; 4280 } 4281 done = MSGLOOP_MSGCOMPLETE; 4282 break; 4283 } 4284 case MSG_EXT_WDTR: 4285 { 4286 u_int bus_width; 4287 u_int saved_width; 4288 u_int sending_reply; 4289 4290 sending_reply = FALSE; 4291 if (ahd->msgin_buf[1] != MSG_EXT_WDTR_LEN) { 4292 reject = TRUE; 4293 break; 4294 } 4295 4296 /* 4297 * Wait until we have our arg before validating 4298 * and acting on this message. 4299 * 4300 * Add one to MSG_EXT_WDTR_LEN to account for 4301 * the extended message preamble. 4302 */ 4303 if (ahd->msgin_index < (MSG_EXT_WDTR_LEN + 1)) 4304 break; 4305 4306 bus_width = ahd->msgin_buf[3]; 4307 saved_width = bus_width; 4308 ahd_validate_width(ahd, tinfo, &bus_width, 4309 devinfo->role); 4310 if (bootverbose) { 4311 printf("(%s:%c:%d:%d): Received WDTR " 4312 "%x filtered to %x\n", 4313 ahd_name(ahd), devinfo->channel, 4314 devinfo->target, devinfo->lun, 4315 saved_width, bus_width); 4316 } 4317 4318 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, TRUE)) { 4319 /* 4320 * Don't send a WDTR back to the 4321 * target, since we asked first. 4322 * If the width went higher than our 4323 * request, reject it. 4324 */ 4325 if (saved_width > bus_width) { 4326 reject = TRUE; 4327 printf("(%s:%c:%d:%d): requested %dBit " 4328 "transfers. Rejecting...\n", 4329 ahd_name(ahd), devinfo->channel, 4330 devinfo->target, devinfo->lun, 4331 8 * (0x01 << bus_width)); 4332 bus_width = 0; 4333 } 4334 } else { 4335 /* 4336 * Send our own WDTR in reply 4337 */ 4338 if (bootverbose 4339 && devinfo->role == ROLE_INITIATOR) { 4340 printf("(%s:%c:%d:%d): Target " 4341 "Initiated WDTR\n", 4342 ahd_name(ahd), devinfo->channel, 4343 devinfo->target, devinfo->lun); 4344 } 4345 ahd->msgout_index = 0; 4346 ahd->msgout_len = 0; 4347 ahd_construct_wdtr(ahd, devinfo, bus_width); 4348 ahd->msgout_index = 0; 4349 response = TRUE; 4350 sending_reply = TRUE; 4351 } 4352 /* 4353 * After a wide message, we are async, but 4354 * some devices don't seem to honor this portion 4355 * of the spec. Force a renegotiation of the 4356 * sync component of our transfer agreement even 4357 * if our goal is async. By updating our width 4358 * after forcing the negotiation, we avoid 4359 * renegotiating for width. 4360 */ 4361 ahd_update_neg_request(ahd, devinfo, tstate, 4362 tinfo, AHD_NEG_ALWAYS); 4363 ahd_set_width(ahd, devinfo, bus_width, 4364 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4365 /*paused*/TRUE); 4366 if (sending_reply == FALSE && reject == FALSE) { 4367 4368 /* 4369 * We will always have an SDTR to send. 4370 */ 4371 ahd->msgout_index = 0; 4372 ahd->msgout_len = 0; 4373 ahd_build_transfer_msg(ahd, devinfo); 4374 ahd->msgout_index = 0; 4375 response = TRUE; 4376 } 4377 done = MSGLOOP_MSGCOMPLETE; 4378 break; 4379 } 4380 case MSG_EXT_PPR: 4381 { 4382 u_int period; 4383 u_int offset; 4384 u_int bus_width; 4385 u_int ppr_options; 4386 u_int saved_width; 4387 u_int saved_offset; 4388 u_int saved_ppr_options; 4389 4390 if (ahd->msgin_buf[1] != MSG_EXT_PPR_LEN) { 4391 reject = TRUE; 4392 break; 4393 } 4394 4395 /* 4396 * Wait until we have all args before validating 4397 * and acting on this message. 4398 * 4399 * Add one to MSG_EXT_PPR_LEN to account for 4400 * the extended message preamble. 4401 */ 4402 if (ahd->msgin_index < (MSG_EXT_PPR_LEN + 1)) 4403 break; 4404 4405 period = ahd->msgin_buf[3]; 4406 offset = ahd->msgin_buf[5]; 4407 bus_width = ahd->msgin_buf[6]; 4408 saved_width = bus_width; 4409 ppr_options = ahd->msgin_buf[7]; 4410 /* 4411 * According to the spec, a DT only 4412 * period factor with no DT option 4413 * set implies async. 4414 */ 4415 if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0 4416 && period <= 9) 4417 offset = 0; 4418 saved_ppr_options = ppr_options; 4419 saved_offset = offset; 4420 4421 /* 4422 * Transfer options are only available if we 4423 * are negotiating wide. 4424 */ 4425 if (bus_width == 0) 4426 ppr_options &= MSG_EXT_PPR_QAS_REQ; 4427 4428 ahd_validate_width(ahd, tinfo, &bus_width, 4429 devinfo->role); 4430 ahd_devlimited_syncrate(ahd, tinfo, &period, 4431 &ppr_options, devinfo->role); 4432 ahd_validate_offset(ahd, tinfo, period, &offset, 4433 bus_width, devinfo->role); 4434 4435 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, TRUE)) { 4436 /* 4437 * If we are unable to do any of the 4438 * requested options (we went too low), 4439 * then we'll have to reject the message. 4440 */ 4441 if (saved_width > bus_width 4442 || saved_offset != offset 4443 || saved_ppr_options != ppr_options) { 4444 reject = TRUE; 4445 period = 0; 4446 offset = 0; 4447 bus_width = 0; 4448 ppr_options = 0; 4449 } 4450 } else { 4451 if (devinfo->role != ROLE_TARGET) 4452 printf("(%s:%c:%d:%d): Target " 4453 "Initiated PPR\n", 4454 ahd_name(ahd), devinfo->channel, 4455 devinfo->target, devinfo->lun); 4456 else 4457 printf("(%s:%c:%d:%d): Initiator " 4458 "Initiated PPR\n", 4459 ahd_name(ahd), devinfo->channel, 4460 devinfo->target, devinfo->lun); 4461 ahd->msgout_index = 0; 4462 ahd->msgout_len = 0; 4463 ahd_construct_ppr(ahd, devinfo, period, offset, 4464 bus_width, ppr_options); 4465 ahd->msgout_index = 0; 4466 response = TRUE; 4467 } 4468 if (bootverbose) { 4469 printf("(%s:%c:%d:%d): Received PPR width %x, " 4470 "period %x, offset %x,options %x\n" 4471 "\tFiltered to width %x, period %x, " 4472 "offset %x, options %x\n", 4473 ahd_name(ahd), devinfo->channel, 4474 devinfo->target, devinfo->lun, 4475 saved_width, ahd->msgin_buf[3], 4476 saved_offset, saved_ppr_options, 4477 bus_width, period, offset, ppr_options); 4478 } 4479 ahd_set_width(ahd, devinfo, bus_width, 4480 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4481 /*paused*/TRUE); 4482 ahd_set_syncrate(ahd, devinfo, period, 4483 offset, ppr_options, 4484 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4485 /*paused*/TRUE); 4486 4487 done = MSGLOOP_MSGCOMPLETE; 4488 break; 4489 } 4490 default: 4491 /* Unknown extended message. Reject it. */ 4492 reject = TRUE; 4493 break; 4494 } 4495 break; 4496 } 4497#ifdef AHD_TARGET_MODE 4498 case MSG_BUS_DEV_RESET: 4499 ahd_handle_devreset(ahd, devinfo, CAM_LUN_WILDCARD, 4500 CAM_BDR_SENT, 4501 "Bus Device Reset Received", 4502 /*verbose_level*/0); 4503 ahd_restart(ahd); 4504 done = MSGLOOP_TERMINATED; 4505 break; 4506 case MSG_ABORT_TAG: 4507 case MSG_ABORT: 4508 case MSG_CLEAR_QUEUE: 4509 { 4510 int tag; 4511 4512 /* Target mode messages */ 4513 if (devinfo->role != ROLE_TARGET) { 4514 reject = TRUE; 4515 break; 4516 } 4517 tag = SCB_LIST_NULL; 4518 if (ahd->msgin_buf[0] == MSG_ABORT_TAG) 4519 tag = ahd_inb(ahd, INITIATOR_TAG); 4520 ahd_abort_scbs(ahd, devinfo->target, devinfo->channel, 4521 devinfo->lun, tag, ROLE_TARGET, 4522 CAM_REQ_ABORTED); 4523 4524 tstate = ahd->enabled_targets[devinfo->our_scsiid]; 4525 if (tstate != NULL) { 4526 struct ahd_tmode_lstate* lstate; 4527 4528 lstate = tstate->enabled_luns[devinfo->lun]; 4529 if (lstate != NULL) { 4530 ahd_queue_lstate_event(ahd, lstate, 4531 devinfo->our_scsiid, 4532 ahd->msgin_buf[0], 4533 /*arg*/tag); 4534 ahd_send_lstate_events(ahd, lstate); 4535 } 4536 } 4537 ahd_restart(ahd); 4538 done = MSGLOOP_TERMINATED; 4539 break; 4540 } 4541#endif 4542 case MSG_QAS_REQUEST: 4543#ifdef AHD_DEBUG 4544 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 4545 printf("%s: QAS request. SCSISIGI == 0x%x\n", 4546 ahd_name(ahd), ahd_inb(ahd, SCSISIGI)); 4547#endif 4548 ahd->msg_flags |= MSG_FLAG_EXPECT_QASREJ_BUSFREE; 4549 /* FALLTHROUGH */ 4550 case MSG_TERM_IO_PROC: 4551 default: 4552 reject = TRUE; 4553 break; 4554 } 4555 4556 if (reject) { 4557 /* 4558 * Setup to reject the message. 4559 */ 4560 ahd->msgout_index = 0; 4561 ahd->msgout_len = 1; 4562 ahd->msgout_buf[0] = MSG_MESSAGE_REJECT; 4563 done = MSGLOOP_MSGCOMPLETE; 4564 response = TRUE; 4565 } 4566 4567 if (done != MSGLOOP_IN_PROG && !response) 4568 /* Clear the outgoing message buffer */ 4569 ahd->msgout_len = 0; 4570 4571 return (done); 4572} 4573 4574/* 4575 * Process a message reject message. 4576 */ 4577static int 4578ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4579{ 4580 /* 4581 * What we care about here is if we had an 4582 * outstanding SDTR or WDTR message for this 4583 * target. If we did, this is a signal that 4584 * the target is refusing negotiation. 4585 */ 4586 struct scb *scb; 4587 struct ahd_initiator_tinfo *tinfo; 4588 struct ahd_tmode_tstate *tstate; 4589 u_int scb_index; 4590 u_int last_msg; 4591 int response = 0; 4592 4593 scb_index = ahd_get_scbptr(ahd); 4594 scb = ahd_lookup_scb(ahd, scb_index); 4595 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, 4596 devinfo->our_scsiid, 4597 devinfo->target, &tstate); 4598 /* Might be necessary */ 4599 last_msg = ahd_inb(ahd, LAST_MSG); 4600 4601 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/FALSE)) { 4602 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/TRUE) 4603 && tinfo->goal.period <= AHD_SYNCRATE_PACED) { 4604 /* 4605 * Target may not like our SPI-4 PPR Options. 4606 * Attempt to negotiate 80MHz which will turn 4607 * off these options. 4608 */ 4609 if (bootverbose) { 4610 printf("(%s:%c:%d:%d): PPR Rejected. " 4611 "Trying simple U160 PPR\n", 4612 ahd_name(ahd), devinfo->channel, 4613 devinfo->target, devinfo->lun); 4614 } 4615 tinfo->goal.period = AHD_SYNCRATE_DT; 4616 tinfo->goal.ppr_options &= MSG_EXT_PPR_IU_REQ 4617 | MSG_EXT_PPR_QAS_REQ 4618 | MSG_EXT_PPR_DT_REQ; 4619 } else { 4620 /* 4621 * Target does not support the PPR message. 4622 * Attempt to negotiate SPI-2 style. 4623 */ 4624 if (bootverbose) { 4625 printf("(%s:%c:%d:%d): PPR Rejected. " 4626 "Trying WDTR/SDTR\n", 4627 ahd_name(ahd), devinfo->channel, 4628 devinfo->target, devinfo->lun); 4629 } 4630 tinfo->goal.ppr_options = 0; 4631 tinfo->curr.transport_version = 2; 4632 tinfo->goal.transport_version = 2; 4633 } 4634 ahd->msgout_index = 0; 4635 ahd->msgout_len = 0; 4636 ahd_build_transfer_msg(ahd, devinfo); 4637 ahd->msgout_index = 0; 4638 response = 1; 4639 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, /*full*/FALSE)) { 4640 4641 /* note 8bit xfers */ 4642 printf("(%s:%c:%d:%d): refuses WIDE negotiation. Using " 4643 "8bit transfers\n", ahd_name(ahd), 4644 devinfo->channel, devinfo->target, devinfo->lun); 4645 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 4646 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4647 /*paused*/TRUE); 4648 /* 4649 * No need to clear the sync rate. If the target 4650 * did not accept the command, our syncrate is 4651 * unaffected. If the target started the negotiation, 4652 * but rejected our response, we already cleared the 4653 * sync rate before sending our WDTR. 4654 */ 4655 if (tinfo->goal.offset != tinfo->curr.offset) { 4656 4657 /* Start the sync negotiation */ 4658 ahd->msgout_index = 0; 4659 ahd->msgout_len = 0; 4660 ahd_build_transfer_msg(ahd, devinfo); 4661 ahd->msgout_index = 0; 4662 response = 1; 4663 } 4664 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, /*full*/FALSE)) { 4665 /* note asynch xfers and clear flag */ 4666 ahd_set_syncrate(ahd, devinfo, /*period*/0, 4667 /*offset*/0, /*ppr_options*/0, 4668 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4669 /*paused*/TRUE); 4670 printf("(%s:%c:%d:%d): refuses synchronous negotiation. " 4671 "Using asynchronous transfers\n", 4672 ahd_name(ahd), devinfo->channel, 4673 devinfo->target, devinfo->lun); 4674 } else if ((scb->hscb->control & MSG_SIMPLE_TASK) != 0) { 4675 int tag_type; 4676 int mask; 4677 4678 tag_type = (scb->hscb->control & MSG_SIMPLE_TASK); 4679 4680 if (tag_type == MSG_SIMPLE_TASK) { 4681 printf("(%s:%c:%d:%d): refuses tagged commands. " 4682 "Performing non-tagged I/O\n", ahd_name(ahd), 4683 devinfo->channel, devinfo->target, devinfo->lun); 4684 ahd_set_tags(ahd, devinfo, AHD_QUEUE_NONE); 4685 mask = ~0x23; 4686 } else { 4687 printf("(%s:%c:%d:%d): refuses %s tagged commands. " 4688 "Performing simple queue tagged I/O only\n", 4689 ahd_name(ahd), devinfo->channel, devinfo->target, 4690 devinfo->lun, tag_type == MSG_ORDERED_Q_TAG 4691 ? "ordered" : "head of queue"); 4692 ahd_set_tags(ahd, devinfo, AHD_QUEUE_BASIC); 4693 mask = ~0x03; 4694 } 4695 4696 /* 4697 * Resend the identify for this CCB as the target 4698 * may believe that the selection is invalid otherwise. 4699 */ 4700 ahd_outb(ahd, SCB_CONTROL, 4701 ahd_inb_scbram(ahd, SCB_CONTROL) & mask); 4702 scb->hscb->control &= mask; 4703 ahd_set_transaction_tag(scb, /*enabled*/FALSE, 4704 /*type*/MSG_SIMPLE_TASK); 4705 ahd_outb(ahd, MSG_OUT, MSG_IDENTIFYFLAG); 4706 ahd_assert_atn(ahd); 4707 ahd_busy_tcl(ahd, BUILD_TCL(scb->hscb->scsiid, devinfo->lun), 4708 SCB_GET_TAG(scb)); 4709 4710 /* 4711 * Requeue all tagged commands for this target 4712 * currently in our possession so they can be 4713 * converted to untagged commands. 4714 */ 4715 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 4716 SCB_GET_CHANNEL(ahd, scb), 4717 SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL, 4718 ROLE_INITIATOR, CAM_REQUEUE_REQ, 4719 SEARCH_COMPLETE); 4720 } else if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_IDENTIFYFLAG, TRUE)) { 4721 /* 4722 * Most likely the device believes that we had 4723 * previously negotiated packetized. 4724 */ 4725 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE 4726 | MSG_FLAG_IU_REQ_CHANGED; 4727 4728 ahd_force_renegotiation(ahd, devinfo); 4729 ahd->msgout_index = 0; 4730 ahd->msgout_len = 0; 4731 ahd_build_transfer_msg(ahd, devinfo); 4732 ahd->msgout_index = 0; 4733 response = 1; 4734 } else { 4735 /* 4736 * Otherwise, we ignore it. 4737 */ 4738 printf("%s:%c:%d: Message reject for %x -- ignored\n", 4739 ahd_name(ahd), devinfo->channel, devinfo->target, 4740 last_msg); 4741 } 4742 return (response); 4743} 4744 4745/* 4746 * Process an ignore wide residue message. 4747 */ 4748static void 4749ahd_handle_ign_wide_residue(struct ahd_softc *ahd, 4750 struct ahd_devinfo *devinfo) 4751{ 4752 u_int scb_index; 4753 struct scb *scb; 4754 4755 printf("%s: ahd_handle_ign_wide_residue\n", ahd_name(ahd)); 4756 4757 scb_index = ahd_get_scbptr(ahd); 4758 scb = ahd_lookup_scb(ahd, scb_index); 4759 /* 4760 * XXX Actually check data direction in the sequencer? 4761 * Perhaps add datadir to some spare bits in the hscb? 4762 */ 4763 if ((ahd_inb(ahd, SEQ_FLAGS) & DPHASE) == 0 4764 || ahd_get_transfer_dir(scb) != CAM_DIR_IN) { 4765 /* 4766 * Ignore the message if we haven't 4767 * seen an appropriate data phase yet. 4768 */ 4769 } else { 4770 /* 4771 * If the residual occurred on the last 4772 * transfer and the transfer request was 4773 * expected to end on an odd count, do 4774 * nothing. Otherwise, subtract a byte 4775 * and update the residual count accordingly. 4776 */ 4777 uint32_t sgptr; 4778 4779 sgptr = ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR); 4780 if ((sgptr & SG_LIST_NULL) != 0 4781 && (ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE) 4782 & SCB_XFERLEN_ODD) != 0) { 4783 /* 4784 * If the residual occurred on the last 4785 * transfer and the transfer request was 4786 * expected to end on an odd count, do 4787 * nothing. 4788 */ 4789 } else { 4790 uint32_t data_cnt; 4791 uint64_t data_addr; 4792 uint32_t sglen; 4793 4794 /* Pull in the rest of the sgptr */ 4795 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 4796 data_cnt = ahd_inl_scbram(ahd, SCB_RESIDUAL_DATACNT); 4797 if ((sgptr & SG_LIST_NULL) != 0) { 4798 /* 4799 * The residual data count is not updated 4800 * for the command run to completion case. 4801 * Explicitly zero the count. 4802 */ 4803 data_cnt &= ~AHD_SG_LEN_MASK; 4804 } 4805 data_addr = ahd_inq(ahd, SHADDR); 4806 data_cnt += 1; 4807 data_addr -= 1; 4808 sgptr &= SG_PTR_MASK; 4809 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 4810 struct ahd_dma64_seg *sg; 4811 4812 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 4813 4814 /* 4815 * The residual sg ptr points to the next S/G 4816 * to load so we must go back one. 4817 */ 4818 sg--; 4819 sglen = ahd_le32toh(sg->len) & AHD_SG_LEN_MASK; 4820 if (sg != scb->sg_list 4821 && sglen < (data_cnt & AHD_SG_LEN_MASK)) { 4822 4823 sg--; 4824 sglen = ahd_le32toh(sg->len); 4825 /* 4826 * Preserve High Address and SG_LIST 4827 * bits while setting the count to 1. 4828 */ 4829 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK)); 4830 data_addr = ahd_le64toh(sg->addr) 4831 + (sglen & AHD_SG_LEN_MASK) 4832 - 1; 4833 4834 /* 4835 * Increment sg so it points to the 4836 * "next" sg. 4837 */ 4838 sg++; 4839 sgptr = ahd_sg_virt_to_bus(ahd, scb, 4840 sg); 4841 } 4842 } else { 4843 struct ahd_dma_seg *sg; 4844 4845 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 4846 4847 /* 4848 * The residual sg ptr points to the next S/G 4849 * to load so we must go back one. 4850 */ 4851 sg--; 4852 sglen = ahd_le32toh(sg->len) & AHD_SG_LEN_MASK; 4853 if (sg != scb->sg_list 4854 && sglen < (data_cnt & AHD_SG_LEN_MASK)) { 4855 4856 sg--; 4857 sglen = ahd_le32toh(sg->len); 4858 /* 4859 * Preserve High Address and SG_LIST 4860 * bits while setting the count to 1. 4861 */ 4862 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK)); 4863 data_addr = ahd_le32toh(sg->addr) 4864 + (sglen & AHD_SG_LEN_MASK) 4865 - 1; 4866 4867 /* 4868 * Increment sg so it points to the 4869 * "next" sg. 4870 */ 4871 sg++; 4872 sgptr = ahd_sg_virt_to_bus(ahd, scb, 4873 sg); 4874 } 4875 } 4876 /* 4877 * Toggle the "oddness" of the transfer length 4878 * to handle this mid-transfer ignore wide 4879 * residue. This ensures that the oddness is 4880 * correct for subsequent data transfers. 4881 */ 4882 ahd_outb(ahd, SCB_TASK_ATTRIBUTE, 4883 ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE) 4884 ^ SCB_XFERLEN_ODD); 4885 4886 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 4887 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, data_cnt); 4888 /* 4889 * The FIFO's pointers will be updated if/when the 4890 * sequencer re-enters a data phase. 4891 */ 4892 } 4893 } 4894} 4895 4896 4897/* 4898 * Reinitialize the data pointers for the active transfer 4899 * based on its current residual. 4900 */ 4901static void 4902ahd_reinitialize_dataptrs(struct ahd_softc *ahd) 4903{ 4904 struct scb *scb; 4905 ahd_mode_state saved_modes; 4906 u_int scb_index; 4907 u_int wait; 4908 uint32_t sgptr; 4909 uint32_t resid; 4910 uint64_t dataptr; 4911 4912 AHD_ASSERT_MODES(ahd, AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK, 4913 AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK); 4914 4915 scb_index = ahd_get_scbptr(ahd); 4916 scb = ahd_lookup_scb(ahd, scb_index); 4917 4918 /* 4919 * Release and reacquire the FIFO so we 4920 * have a clean slate. 4921 */ 4922 ahd_outb(ahd, DFFSXFRCTL, CLRCHN); 4923 wait = 1000; 4924 while (--wait && !(ahd_inb(ahd, MDFFSTAT) & FIFOFREE)) 4925 ahd_delay(100); 4926 if (wait == 0) { 4927 ahd_print_path(ahd, scb); 4928 printf("ahd_reinitialize_dataptrs: Forcing FIFO free.\n"); 4929 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT); 4930 } 4931 saved_modes = ahd_save_modes(ahd); 4932 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 4933 ahd_outb(ahd, DFFSTAT, 4934 ahd_inb(ahd, DFFSTAT) 4935 | (saved_modes == 0x11 ? CURRFIFO_1 : CURRFIFO_0)); 4936 4937 /* 4938 * Determine initial values for data_addr and data_cnt 4939 * for resuming the data phase. 4940 */ 4941 sgptr = (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR + 3) << 24) 4942 | (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR + 2) << 16) 4943 | (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR + 1) << 8) 4944 | ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR); 4945 sgptr &= SG_PTR_MASK; 4946 4947 resid = (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 2) << 16) 4948 | (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 1) << 8) 4949 | ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT); 4950 4951 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 4952 struct ahd_dma64_seg *sg; 4953 4954 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 4955 4956 /* The residual sg_ptr always points to the next sg */ 4957 sg--; 4958 4959 dataptr = ahd_le64toh(sg->addr) 4960 + (ahd_le32toh(sg->len) & AHD_SG_LEN_MASK) 4961 - resid; 4962 ahd_outb(ahd, HADDR + 7, dataptr >> 56); 4963 ahd_outb(ahd, HADDR + 6, dataptr >> 48); 4964 ahd_outb(ahd, HADDR + 5, dataptr >> 40); 4965 ahd_outb(ahd, HADDR + 4, dataptr >> 32); 4966 } else { 4967 struct ahd_dma_seg *sg; 4968 4969 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 4970 4971 /* The residual sg_ptr always points to the next sg */ 4972 sg--; 4973 4974 dataptr = ahd_le32toh(sg->addr) 4975 + (ahd_le32toh(sg->len) & AHD_SG_LEN_MASK) 4976 - resid; 4977 ahd_outb(ahd, HADDR + 4, 4978 (ahd_le32toh(sg->len) & ~AHD_SG_LEN_MASK) >> 24); 4979 } 4980 ahd_outb(ahd, HADDR + 3, dataptr >> 24); 4981 ahd_outb(ahd, HADDR + 2, dataptr >> 16); 4982 ahd_outb(ahd, HADDR + 1, dataptr >> 8); 4983 ahd_outb(ahd, HADDR, dataptr); 4984 ahd_outb(ahd, HCNT + 2, resid >> 16); 4985 ahd_outb(ahd, HCNT + 1, resid >> 8); 4986 ahd_outb(ahd, HCNT, resid); 4987} 4988 4989/* 4990 * Handle the effects of issuing a bus device reset message. 4991 */ 4992static void 4993ahd_handle_devreset(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 4994 u_int lun, cam_status status, const char *message, 4995 int verbose_level) 4996{ 4997#ifdef AHD_TARGET_MODE 4998 struct ahd_tmode_tstate* tstate; 4999#endif 5000 int found; 5001 5002 found = ahd_abort_scbs(ahd, devinfo->target, devinfo->channel, 5003 lun, SCB_LIST_NULL, devinfo->role, 5004 status); 5005 5006#ifdef AHD_TARGET_MODE 5007 /* 5008 * Send an immediate notify ccb to all target mord peripheral 5009 * drivers affected by this action. 5010 */ 5011 tstate = ahd->enabled_targets[devinfo->our_scsiid]; 5012 if (tstate != NULL) { 5013 u_int cur_lun; 5014 u_int max_lun; 5015 5016 if (lun != CAM_LUN_WILDCARD) { 5017 cur_lun = 0; 5018 max_lun = AHD_NUM_LUNS - 1; 5019 } else { 5020 cur_lun = lun; 5021 max_lun = lun; 5022 } 5023 for (cur_lun <= max_lun; cur_lun++) { 5024 struct ahd_tmode_lstate* lstate; 5025 5026 lstate = tstate->enabled_luns[cur_lun]; 5027 if (lstate == NULL) 5028 continue; 5029 5030 ahd_queue_lstate_event(ahd, lstate, devinfo->our_scsiid, 5031 MSG_BUS_DEV_RESET, /*arg*/0); 5032 ahd_send_lstate_events(ahd, lstate); 5033 } 5034 } 5035#endif 5036 5037 /* 5038 * Go back to async/narrow transfers and renegotiate. 5039 */ 5040 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 5041 AHD_TRANS_CUR, /*paused*/TRUE); 5042 ahd_set_syncrate(ahd, devinfo, /*period*/0, /*offset*/0, 5043 /*ppr_options*/0, AHD_TRANS_CUR, /*paused*/TRUE); 5044 5045 ahd_send_async(ahd, devinfo->channel, devinfo->target, 5046 lun, AC_SENT_BDR, NULL); 5047 5048 if (message != NULL 5049 && (verbose_level <= bootverbose)) 5050 printf("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd), 5051 message, devinfo->channel, devinfo->target, found); 5052} 5053 5054#ifdef AHD_TARGET_MODE 5055static void 5056ahd_setup_target_msgin(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 5057 struct scb *scb) 5058{ 5059 5060 /* 5061 * To facilitate adding multiple messages together, 5062 * each routine should increment the index and len 5063 * variables instead of setting them explicitly. 5064 */ 5065 ahd->msgout_index = 0; 5066 ahd->msgout_len = 0; 5067 5068 if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0) 5069 ahd_build_transfer_msg(ahd, devinfo); 5070 else 5071 panic("ahd_intr: AWAITING target message with no message"); 5072 5073 ahd->msgout_index = 0; 5074 ahd->msg_type = MSG_TYPE_TARGET_MSGIN; 5075} 5076#endif 5077/**************************** Initialization **********************************/ 5078static u_int 5079ahd_sglist_size(struct ahd_softc *ahd) 5080{ 5081 bus_size_t list_size; 5082 5083 list_size = sizeof(struct ahd_dma_seg) * AHD_NSEG; 5084 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 5085 list_size = sizeof(struct ahd_dma64_seg) * AHD_NSEG; 5086 return (list_size); 5087} 5088 5089/* 5090 * Calculate the optimum S/G List allocation size. S/G elements used 5091 * for a given transaction must be physically contiguous. Assume the 5092 * OS will allocate full pages to us, so it doesn't make sense to request 5093 * less than a page. 5094 */ 5095static u_int 5096ahd_sglist_allocsize(struct ahd_softc *ahd) 5097{ 5098 bus_size_t sg_list_increment; 5099 bus_size_t sg_list_size; 5100 bus_size_t max_list_size; 5101 bus_size_t best_list_size; 5102 5103 /* Start out with the minimum required for AHD_NSEG. */ 5104 sg_list_increment = ahd_sglist_size(ahd); 5105 sg_list_size = sg_list_increment; 5106 5107 /* Get us as close as possible to a page in size. */ 5108 while ((sg_list_size + sg_list_increment) <= PAGE_SIZE) 5109 sg_list_size += sg_list_increment; 5110 5111 /* 5112 * Try to reduce the amount of wastage by allocating 5113 * multiple pages. 5114 */ 5115 best_list_size = sg_list_size; 5116 max_list_size = roundup(sg_list_increment, PAGE_SIZE); 5117 if (max_list_size < 4 * PAGE_SIZE) 5118 max_list_size = 4 * PAGE_SIZE; 5119 if (max_list_size > (AHD_SCB_MAX_ALLOC * sg_list_increment)) 5120 max_list_size = (AHD_SCB_MAX_ALLOC * sg_list_increment); 5121 while ((sg_list_size + sg_list_increment) <= max_list_size 5122 && (sg_list_size % PAGE_SIZE) != 0) { 5123 bus_size_t new_mod; 5124 bus_size_t best_mod; 5125 5126 sg_list_size += sg_list_increment; 5127 new_mod = sg_list_size % PAGE_SIZE; 5128 best_mod = best_list_size % PAGE_SIZE; 5129 if (new_mod > best_mod || new_mod == 0) { 5130 best_list_size = sg_list_size; 5131 } 5132 } 5133 return (best_list_size); 5134} 5135 5136int 5137ahd_softc_init(struct ahd_softc *ahd) 5138{ 5139 5140 ahd->unpause = 0; 5141 ahd->pause = PAUSE; 5142 return (0); 5143} 5144 5145void 5146ahd_set_unit(struct ahd_softc *ahd, int unit) 5147{ 5148 ahd->unit = unit; 5149} 5150 5151void 5152ahd_set_name(struct ahd_softc *ahd, const char *name) 5153{ 5154 ahd->name = name; 5155} 5156 5157void 5158ahd_free(struct ahd_softc *ahd) 5159{ 5160 int i; 5161 5162 switch (ahd->init_level) { 5163 default: 5164 case 2: 5165 ahd_shutdown(ahd); 5166 TAILQ_REMOVE(&ahd_tailq, ahd, links); 5167 /* FALLTHROUGH */ 5168 case 1: 5169 bus_dmamap_unload(ahd->parent_dmat, 5170 ahd->shared_data_map.dmamap); 5171 bus_dmamap_destroy(ahd->parent_dmat, 5172 ahd->shared_data_map.dmamap); 5173 bus_dmamem_unmap(ahd->parent_dmat, (void *)ahd->qoutfifo, 5174 ahd->shared_data_size); 5175 bus_dmamem_free(ahd->parent_dmat, 5176 &ahd->shared_data_map.dmasegs, ahd->shared_data_map.nseg); 5177 break; 5178 case 0: 5179 break; 5180 } 5181 5182 ahd_platform_free(ahd); 5183 ahd_fini_scbdata(ahd); 5184 for (i = 0; i < AHD_NUM_TARGETS; i++) { 5185 struct ahd_tmode_tstate *tstate; 5186 5187 tstate = ahd->enabled_targets[i]; 5188 if (tstate != NULL) { 5189#if AHD_TARGET_MODE 5190 int j; 5191 5192 for (j = 0; j < AHD_NUM_LUNS; j++) { 5193 struct ahd_tmode_lstate *lstate; 5194 5195 lstate = tstate->enabled_luns[j]; 5196 if (lstate != NULL) { 5197 xpt_free_path(lstate->path); 5198 free(lstate, M_DEVBUF); 5199 } 5200 } 5201#endif 5202 free(tstate, M_DEVBUF); 5203 } 5204 } 5205#if AHD_TARGET_MODE 5206 if (ahd->black_hole != NULL) { 5207 xpt_free_path(ahd->black_hole->path); 5208 free(ahd->black_hole, M_DEVBUF); 5209 } 5210#endif 5211 if (ahd->seep_config != NULL) 5212 free(ahd->seep_config, M_DEVBUF); 5213 if (ahd->saved_stack != NULL) 5214 free(ahd->saved_stack, M_DEVBUF); 5215#ifndef __FreeBSD__ 5216 free(ahd, M_DEVBUF); 5217#endif 5218 return; 5219} 5220 5221void 5222ahd_shutdown(void *arg) 5223{ 5224 struct ahd_softc *ahd; 5225 5226 ahd = arg; 5227 5228#ifdef AHD_DEBUG 5229 printf("%s: ahd_shutdown\n", ahd_name(ahd)); 5230#endif 5231 /* 5232 * Stop periodic timer callbacks. 5233 */ 5234 ahd_timer_stop(&ahd->reset_timer); 5235 ahd_timer_stop(&ahd->stat_timer); 5236 5237 /* This will reset most registers to 0, but not all */ 5238 ahd_reset(ahd, /*reinit*/FALSE); 5239} 5240 5241/* 5242 * Reset the controller and record some information about it 5243 * that is only available just after a reset. If "reinit" is 5244 * non-zero, this reset occurred after initial configuration 5245 * and the caller requests that the chip be fully reinitialized 5246 * to a runnable state. Chip interrupts are *not* enabled after 5247 * a reinitialization. The caller must enable interrupts via 5248 * ahd_intr_enable(). 5249 */ 5250int 5251ahd_reset(struct ahd_softc *ahd, int reinit) 5252{ 5253 u_int sxfrctl1; 5254 int wait; 5255 uint32_t cmd; 5256 struct ahd_pci_busdata *bd = ahd->bus_data; 5257 5258 /* 5259 * Preserve the value of the SXFRCTL1 register for all channels. 5260 * It contains settings that affect termination and we don't want 5261 * to disturb the integrity of the bus. 5262 */ 5263 ahd_pause(ahd); 5264 ahd_update_modes(ahd); 5265 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5266 sxfrctl1 = ahd_inb(ahd, SXFRCTL1); 5267 5268 cmd = pci_conf_read(bd->pc, bd->tag, PCI_COMMAND_STATUS_REG); 5269 5270 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) { 5271 uint32_t mod_cmd; 5272 5273 /* 5274 * A4 Razor #632 5275 * During the assertion of CHIPRST, the chip 5276 * does not disable its parity logic prior to 5277 * the start of the reset. This may cause a 5278 * parity error to be detected and thus a 5279 * spurious SERR or PERR assertion. Disable 5280 * PERR and SERR responses during the CHIPRST. 5281 */ 5282 mod_cmd = cmd & 5283 ~(PCI_COMMAND_PARITY_ENABLE|PCI_COMMAND_SERR_ENABLE); 5284 pci_conf_write(bd->pc, bd->tag, 5285 PCI_COMMAND_STATUS_REG, mod_cmd); 5286 } 5287 ahd_outb(ahd, HCNTRL, CHIPRST | ahd->pause); 5288 5289 /* 5290 * Ensure that the reset has finished. We delay 1000us 5291 * prior to reading the register to make sure the chip 5292 * has sufficiently completed its reset to handle register 5293 * accesses. 5294 */ 5295 wait = 1000; 5296 do { 5297 ahd_delay(1000); 5298 } while (--wait && !(ahd_inb(ahd, HCNTRL) & CHIPRSTACK)); 5299 5300 if (wait == 0) { 5301 printf("%s: WARNING - Failed chip reset! " 5302 "Trying to initialize anyway.\n", ahd_name(ahd)); 5303 } 5304 ahd_outb(ahd, HCNTRL, ahd->pause); 5305 5306 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) { 5307 /* 5308 * Clear any latched PCI error status and restore 5309 * previous SERR and PERR response enables. 5310 */ 5311 pci_conf_write(bd->pc, bd->tag, PCI_COMMAND_STATUS_REG, cmd | 5312 (PCI_STATUS_PARITY_ERROR | PCI_STATUS_TARGET_TARGET_ABORT | 5313 PCI_STATUS_MASTER_TARGET_ABORT | PCI_STATUS_MASTER_ABORT | 5314 PCI_STATUS_SPECIAL_ERROR)); 5315 } 5316 5317 /* 5318 * Mode should be SCSI after a chip reset, but lets 5319 * set it just to be safe. We touch the MODE_PTR 5320 * register directly so as to bypass the lazy update 5321 * ode in ahd_set_modes(). 5322 */ 5323 ahd_known_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5324 ahd_outb(ahd, MODE_PTR, 5325 ahd_build_mode_state(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI)); 5326 5327 /* 5328 * Restore SXFRCTL1. 5329 * 5330 * We must always initialize STPWEN to 1 before we 5331 * restore the saved values. STPWEN is initialized 5332 * to a tri-state condition which can only be cleared 5333 * by turning it on. 5334 */ 5335 ahd_outb(ahd, SXFRCTL1, sxfrctl1|STPWEN); 5336 ahd_outb(ahd, SXFRCTL1, sxfrctl1); 5337 5338 /* Determine chip configuration */ 5339 ahd->features &= ~AHD_WIDE; 5340 if ((ahd_inb(ahd, SBLKCTL) & SELWIDE) != 0) 5341 ahd->features |= AHD_WIDE; 5342 5343 /* 5344 * If a recovery action has forced a chip reset, 5345 * re-initialize the chip to our liking. 5346 */ 5347 if (reinit != 0) 5348 ahd_chip_init(ahd); 5349 5350 return (0); 5351} 5352 5353/* 5354 * Determine the number of SCBs available on the controller 5355 */ 5356int 5357ahd_probe_scbs(struct ahd_softc *ahd) { 5358 int i; 5359 5360 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 5361 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 5362 for (i = 0; i < AHD_SCB_MAX; i++) { 5363 int j; 5364 int ret; 5365 5366 ahd_set_scbptr(ahd, i); 5367 ahd_outw(ahd, SCB_BASE, i); 5368 for (j = 2; j < 64; j++) 5369 ahd_outb(ahd, SCB_BASE+j, 0); 5370 /* Start out life as unallocated (needing an abort) */ 5371 ahd_outb(ahd, SCB_CONTROL, MK_MESSAGE); 5372 ret = ahd_inw_scbram(ahd, SCB_BASE); 5373 if (ret != i) { 5374 printf("%s: ahd_probe_scbs (!=%d): returned 0x%x\n", 5375 ahd_name(ahd), i, ret); 5376 break; 5377 } 5378 ahd_set_scbptr(ahd, 0); 5379 ret = ahd_inw_scbram(ahd, SCB_BASE); 5380 if (ret != 0) { 5381 printf("ahd_probe_scbs (non zero): returned 0x%x\n", 5382 ret); 5383 break; 5384 } 5385 } 5386 return (i); 5387} 5388 5389static void 5390ahd_initialize_hscbs(struct ahd_softc *ahd) 5391{ 5392 int i; 5393 5394 for (i = 0; i < ahd->scb_data.maxhscbs; i++) { 5395 ahd_set_scbptr(ahd, i); 5396 5397 /* Clear the control byte. */ 5398 ahd_outb(ahd, SCB_CONTROL, 0); 5399 5400 /* Set the next pointer */ 5401 ahd_outw(ahd, SCB_NEXT, SCB_LIST_NULL); 5402 } 5403} 5404 5405static int 5406ahd_init_scbdata(struct ahd_softc *ahd) 5407{ 5408 struct scb_data *scb_data; 5409 int i; 5410 5411 scb_data = &ahd->scb_data; 5412 TAILQ_INIT(&scb_data->free_scbs); 5413 for (i = 0; i < AHD_NUM_TARGETS * AHD_NUM_LUNS_NONPKT; i++) 5414 LIST_INIT(&scb_data->free_scb_lists[i]); 5415 LIST_INIT(&scb_data->any_dev_free_scb_list); 5416 SLIST_INIT(&scb_data->hscb_maps); 5417 SLIST_INIT(&scb_data->sg_maps); 5418 SLIST_INIT(&scb_data->sense_maps); 5419 5420 /* Determine the number of hardware SCBs and initialize them */ 5421 scb_data->maxhscbs = ahd_probe_scbs(ahd); 5422 if (scb_data->maxhscbs == 0) { 5423 printf("%s: No SCB space found\n", ahd_name(ahd)); 5424 return (ENXIO); 5425 } 5426 ahd_initialize_hscbs(ahd); 5427 5428 /* 5429 * Create our DMA tags. These tags define the kinds of device 5430 * accessible memory allocations and memory mappings we will 5431 * need to perform during normal operation. 5432 * 5433 * Unless we need to further restrict the allocation, we rely 5434 * on the restrictions of the parent dmat, hence the common 5435 * use of MAXADDR and MAXSIZE. 5436 */ 5437 5438 /* Perform initial CCB allocation */ 5439 ahd_alloc_scbs(ahd); 5440 5441 if (scb_data->numscbs == 0) { 5442 printf("%s: ahd_init_scbdata - " 5443 "Unable to allocate initial scbs\n", 5444 ahd_name(ahd)); 5445 goto error_exit; 5446 } 5447 5448 /* 5449 * Note that we were successful 5450 */ 5451 return (0); 5452 5453error_exit: 5454 5455 return (ENOMEM); 5456} 5457 5458static struct scb * 5459ahd_find_scb_by_tag(struct ahd_softc *ahd, u_int tag) 5460{ 5461 struct scb *scb; 5462 5463 /* 5464 * Look on the pending list. 5465 */ 5466 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 5467 if (SCB_GET_TAG(scb) == tag) 5468 return (scb); 5469 } 5470 5471 /* 5472 * Then on all of the collision free lists. 5473 */ 5474 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 5475 struct scb *list_scb; 5476 5477 list_scb = scb; 5478 do { 5479 if (SCB_GET_TAG(list_scb) == tag) 5480 return (list_scb); 5481 list_scb = LIST_NEXT(list_scb, collision_links); 5482 } while (list_scb); 5483 } 5484 5485 /* 5486 * And finally on the generic free list. 5487 */ 5488 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) { 5489 if (SCB_GET_TAG(scb) == tag) 5490 return (scb); 5491 } 5492 5493 return (NULL); 5494} 5495 5496static void 5497ahd_fini_scbdata(struct ahd_softc *ahd) 5498{ 5499 struct scb_data *scb_data; 5500 5501 scb_data = &ahd->scb_data; 5502 if (scb_data == NULL) 5503 return; 5504 5505 switch (scb_data->init_level) { 5506 default: 5507 case 3: 5508 { 5509 struct map_node *sns_map; 5510 5511 while ((sns_map = SLIST_FIRST(&scb_data->sense_maps)) != NULL) { 5512 SLIST_REMOVE_HEAD(&scb_data->sense_maps, links); 5513 ahd_freedmamem(ahd->parent_dmat, PAGE_SIZE, 5514 sns_map->dmamap, (void *)sns_map->vaddr, 5515 &sns_map->dmasegs, sns_map->nseg); 5516 free(sns_map, M_DEVBUF); 5517 } 5518 } 5519 /* FALLTHROUGH */ 5520 case 2: 5521 { 5522 struct map_node *sg_map; 5523 5524 while ((sg_map = SLIST_FIRST(&scb_data->sg_maps)) != NULL) { 5525 SLIST_REMOVE_HEAD(&scb_data->sg_maps, links); 5526 ahd_freedmamem(ahd->parent_dmat, 5527 ahd_sglist_allocsize(ahd), 5528 sg_map->dmamap, (void *)sg_map->vaddr, 5529 &sg_map->dmasegs, sg_map->nseg); 5530 free(sg_map, M_DEVBUF); 5531 } 5532 } 5533 /* FALLTHROUGH */ 5534 case 1: 5535 { 5536 struct map_node *hscb_map; 5537 5538 while ((hscb_map = SLIST_FIRST(&scb_data->hscb_maps)) != NULL) { 5539 SLIST_REMOVE_HEAD(&scb_data->hscb_maps, links); 5540 ahd_freedmamem(ahd->parent_dmat, PAGE_SIZE, 5541 hscb_map->dmamap, 5542 (void *)hscb_map->vaddr, 5543 &hscb_map->dmasegs, hscb_map->nseg); 5544 free(hscb_map, M_DEVBUF); 5545 } 5546 } 5547 /* FALLTHROUGH */ 5548 case 0: 5549 break; 5550 } 5551} 5552 5553/* 5554 * DSP filter Bypass must be enabled until the first selection 5555 * after a change in bus mode (Razor #491 and #493). 5556 */ 5557static void 5558ahd_setup_iocell_workaround(struct ahd_softc *ahd) 5559{ 5560 ahd_mode_state saved_modes; 5561 5562 saved_modes = ahd_save_modes(ahd); 5563 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 5564 ahd_outb(ahd, DSPDATACTL, ahd_inb(ahd, DSPDATACTL) 5565 | BYPASSENAB | RCVROFFSTDIS | XMITOFFSTDIS); 5566 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) | (ENSELDO|ENSELDI)); 5567#ifdef AHD_DEBUG 5568 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5569 printf("%s: Setting up iocell workaround\n", ahd_name(ahd)); 5570#endif 5571 ahd_restore_modes(ahd, saved_modes); 5572 ahd->flags &= ~AHD_HAD_FIRST_SEL; 5573} 5574 5575static void 5576ahd_iocell_first_selection(struct ahd_softc *ahd) 5577{ 5578 ahd_mode_state saved_modes; 5579 u_int sblkctl; 5580 5581 if ((ahd->flags & AHD_HAD_FIRST_SEL) != 0) 5582 return; 5583 saved_modes = ahd_save_modes(ahd); 5584 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5585 sblkctl = ahd_inb(ahd, SBLKCTL); 5586 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 5587#ifdef AHD_DEBUG 5588 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5589 printf("%s: iocell first selection\n", ahd_name(ahd)); 5590#endif 5591 if ((sblkctl & ENAB40) != 0) { 5592 ahd_outb(ahd, DSPDATACTL, 5593 ahd_inb(ahd, DSPDATACTL) & ~BYPASSENAB); 5594#ifdef AHD_DEBUG 5595 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5596 printf("%s: BYPASS now disabled\n", ahd_name(ahd)); 5597#endif 5598 } 5599 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) & ~(ENSELDO|ENSELDI)); 5600 ahd_outb(ahd, CLRINT, CLRSCSIINT); 5601 ahd_restore_modes(ahd, saved_modes); 5602 ahd->flags |= AHD_HAD_FIRST_SEL; 5603} 5604 5605/*************************** SCB Management ***********************************/ 5606static void 5607ahd_add_col_list(struct ahd_softc *ahd, struct scb *scb, u_int col_idx) 5608{ 5609 struct scb_list *free_list; 5610 struct scb_tailq *free_tailq; 5611 struct scb *first_scb; 5612 5613 scb->flags |= SCB_ON_COL_LIST; 5614 AHD_SET_SCB_COL_IDX(scb, col_idx); 5615 free_list = &ahd->scb_data.free_scb_lists[col_idx]; 5616 free_tailq = &ahd->scb_data.free_scbs; 5617 first_scb = LIST_FIRST(free_list); 5618 if (first_scb != NULL) { 5619 LIST_INSERT_AFTER(first_scb, scb, collision_links); 5620 } else { 5621 LIST_INSERT_HEAD(free_list, scb, collision_links); 5622 TAILQ_INSERT_TAIL(free_tailq, scb, links.tqe); 5623 } 5624} 5625 5626static void 5627ahd_rem_col_list(struct ahd_softc *ahd, struct scb *scb) 5628{ 5629 struct scb_list *free_list; 5630 struct scb_tailq *free_tailq; 5631 struct scb *first_scb; 5632 u_int col_idx; 5633 5634 scb->flags &= ~SCB_ON_COL_LIST; 5635 col_idx = AHD_GET_SCB_COL_IDX(ahd, scb); 5636 free_list = &ahd->scb_data.free_scb_lists[col_idx]; 5637 free_tailq = &ahd->scb_data.free_scbs; 5638 first_scb = LIST_FIRST(free_list); 5639 if (first_scb == scb) { 5640 struct scb *next_scb; 5641 5642 /* 5643 * Maintain order in the collision free 5644 * lists for fairness if this device has 5645 * other colliding tags active. 5646 */ 5647 next_scb = LIST_NEXT(scb, collision_links); 5648 if (next_scb != NULL) { 5649 TAILQ_INSERT_AFTER(free_tailq, scb, 5650 next_scb, links.tqe); 5651 } 5652 TAILQ_REMOVE(free_tailq, scb, links.tqe); 5653 } 5654 LIST_REMOVE(scb, collision_links); 5655} 5656 5657/* 5658 * Get a free scb. If there are none, see if we can allocate a new SCB. 5659 */ 5660struct scb * 5661ahd_get_scb(struct ahd_softc *ahd, u_int col_idx) 5662{ 5663 struct scb *scb; 5664 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 5665 if (AHD_GET_SCB_COL_IDX(ahd, scb) != col_idx) { 5666 ahd_rem_col_list(ahd, scb); 5667 goto found; 5668 } 5669 } 5670 if ((scb = LIST_FIRST(&ahd->scb_data.any_dev_free_scb_list)) == NULL) 5671 return (NULL); 5672 LIST_REMOVE(scb, links.le); 5673 if (col_idx != AHD_NEVER_COL_IDX 5674 && (scb->col_scb != NULL) 5675 && (scb->col_scb->flags & SCB_ACTIVE) == 0) { 5676 LIST_REMOVE(scb->col_scb, links.le); 5677 ahd_add_col_list(ahd, scb->col_scb, col_idx); 5678 } 5679found: 5680 scb->flags |= SCB_ACTIVE; 5681 return (scb); 5682} 5683 5684/* 5685 * Return an SCB resource to the free list. 5686 */ 5687void 5688ahd_free_scb(struct ahd_softc *ahd, struct scb *scb) 5689{ 5690 5691 /* Clean up for the next user */ 5692 scb->flags = SCB_FLAG_NONE; 5693 scb->hscb->control = 0; 5694 ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = NULL; 5695 5696 if (scb->col_scb == NULL) { 5697 5698 /* 5699 * No collision possible. Just free normally. 5700 */ 5701 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 5702 scb, links.le); 5703 } else if ((scb->col_scb->flags & SCB_ON_COL_LIST) != 0) { 5704 5705 /* 5706 * The SCB we might have collided with is on 5707 * a free collision list. Put both SCBs on 5708 * the generic list. 5709 */ 5710 ahd_rem_col_list(ahd, scb->col_scb); 5711 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 5712 scb, links.le); 5713 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 5714 scb->col_scb, links.le); 5715 } else if ((scb->col_scb->flags 5716 & (SCB_PACKETIZED|SCB_ACTIVE)) == SCB_ACTIVE 5717 && (scb->col_scb->hscb->control & TAG_ENB) != 0) { 5718 5719 /* 5720 * The SCB we might collide with on the next allocation 5721 * is still active in a non-packetized, tagged, context. 5722 * Put us on the SCB collision list. 5723 */ 5724 ahd_add_col_list(ahd, scb, 5725 AHD_GET_SCB_COL_IDX(ahd, scb->col_scb)); 5726 } else { 5727 /* 5728 * The SCB we might collide with on the next allocation 5729 * is either active in a packetized context, or free. 5730 * Since we can't collide, put this SCB on the generic 5731 * free list. 5732 */ 5733 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 5734 scb, links.le); 5735 } 5736 5737 ahd_platform_scb_free(ahd, scb); 5738} 5739 5740int 5741ahd_alloc_scbs(struct ahd_softc *ahd) 5742{ 5743 struct scb_data *scb_data; 5744 struct scb *next_scb; 5745 struct hardware_scb *hscb; 5746 struct map_node *hscb_map; 5747 struct map_node *sg_map; 5748 struct map_node *sense_map; 5749 uint8_t *segs; 5750 uint8_t *sense_data; 5751 bus_addr_t hscb_busaddr; 5752 bus_addr_t sg_busaddr; 5753 bus_addr_t sense_busaddr; 5754 int newcount; 5755 int i; 5756 5757 scb_data = &ahd->scb_data; 5758 if (scb_data->numscbs >= AHD_SCB_MAX_ALLOC) 5759 /* Can't allocate any more */ 5760 return (0); 5761 5762 KASSERT(scb_data->scbs_left >= 0); 5763 if (scb_data->scbs_left != 0) { 5764 int offset; 5765 5766 offset = (PAGE_SIZE / sizeof(*hscb)) - scb_data->scbs_left; 5767 hscb_map = SLIST_FIRST(&scb_data->hscb_maps); 5768 hscb = &((struct hardware_scb *)hscb_map->vaddr)[offset]; 5769 hscb_busaddr = hscb_map->physaddr + (offset * sizeof(*hscb)); 5770 } else { 5771 hscb_map = malloc(sizeof(*hscb_map), M_DEVBUF, M_WAITOK); 5772 5773 if (hscb_map == NULL) 5774 return (0); 5775 5776 memset(hscb_map, 0, sizeof(*hscb_map)); 5777 5778 /* Allocate the next batch of hardware SCBs */ 5779 if (ahd_createdmamem(ahd->parent_dmat, PAGE_SIZE, 5780 ahd->sc_dmaflags, 5781 &hscb_map->dmamap, 5782 (void **)&hscb_map->vaddr, 5783 &hscb_map->physaddr, &hscb_map->dmasegs, 5784 &hscb_map->nseg, ahd_name(ahd), 5785 "hardware SCB structures") < 0) { 5786 free(hscb_map, M_DEVBUF); 5787 return (0); 5788 } 5789 5790 SLIST_INSERT_HEAD(&scb_data->hscb_maps, hscb_map, links); 5791 5792 hscb = (struct hardware_scb *)hscb_map->vaddr; 5793 hscb_busaddr = hscb_map->physaddr; 5794 scb_data->scbs_left = PAGE_SIZE / sizeof(*hscb); 5795 } 5796 5797 scb_data->init_level++; 5798 5799 if (scb_data->sgs_left != 0) { 5800 int offset; 5801 5802 offset = ((ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd)) 5803 - scb_data->sgs_left) * ahd_sglist_size(ahd); 5804 sg_map = SLIST_FIRST(&scb_data->sg_maps); 5805 segs = sg_map->vaddr + offset; 5806 sg_busaddr = sg_map->physaddr + offset; 5807 } else { 5808 sg_map = malloc(sizeof(*sg_map), M_DEVBUF, M_WAITOK); 5809 5810 if (sg_map == NULL) 5811 return (0); 5812 5813 memset(sg_map, 0, sizeof(*sg_map)); 5814 5815 /* Allocate the next batch of S/G lists */ 5816 if (ahd_createdmamem(ahd->parent_dmat, 5817 ahd_sglist_allocsize(ahd), 5818 ahd->sc_dmaflags, 5819 &sg_map->dmamap, (void **)&sg_map->vaddr, 5820 &sg_map->physaddr, &sg_map->dmasegs, 5821 &sg_map->nseg, ahd_name(ahd), 5822 "SG data structures") < 0) { 5823 free(sg_map, M_DEVBUF); 5824 return (0); 5825 } 5826 5827 SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links); 5828 5829 segs = sg_map->vaddr; 5830 sg_busaddr = sg_map->physaddr; 5831 scb_data->sgs_left = 5832 ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd); 5833#ifdef AHD_DEBUG 5834 if (ahd_debug & AHD_SHOW_MEMORY) 5835 printf("%s: ahd_alloc_scbs - Mapped SG data\n", 5836 ahd_name(ahd)); 5837#endif 5838 } 5839 5840 scb_data->init_level++; 5841 5842 5843 if (scb_data->sense_left != 0) { 5844 int offset; 5845 5846 offset = PAGE_SIZE - (AHD_SENSE_BUFSIZE * scb_data->sense_left); 5847 sense_map = SLIST_FIRST(&scb_data->sense_maps); 5848 sense_data = sense_map->vaddr + offset; 5849 sense_busaddr = sense_map->physaddr + offset; 5850 } else { 5851 sense_map = malloc(sizeof(*sense_map), M_DEVBUF, M_WAITOK); 5852 5853 if (sense_map == NULL) 5854 return (0); 5855 5856 memset(sense_map, 0, sizeof(*sense_map)); 5857 5858 /* Allocate the next batch of sense buffers */ 5859 if (ahd_createdmamem(ahd->parent_dmat, PAGE_SIZE, 5860 ahd->sc_dmaflags, 5861 &sense_map->dmamap, 5862 (void **)&sense_map->vaddr, 5863 &sense_map->physaddr, &sense_map->dmasegs, 5864 &sense_map->nseg, ahd_name(ahd), 5865 "Sense Data structures") < 0) { 5866 free(sense_map, M_DEVBUF); 5867 return (0); 5868 } 5869 5870 SLIST_INSERT_HEAD(&scb_data->sense_maps, sense_map, links); 5871 5872 sense_data = sense_map->vaddr; 5873 sense_busaddr = sense_map->physaddr; 5874 scb_data->sense_left = PAGE_SIZE / AHD_SENSE_BUFSIZE; 5875#ifdef AHD_DEBUG 5876 if (ahd_debug & AHD_SHOW_MEMORY) 5877 printf("%s: ahd_alloc_scbs - Mapped sense data\n", 5878 ahd_name(ahd)); 5879#endif 5880 } 5881 5882 scb_data->init_level++; 5883 5884 newcount = MIN(scb_data->sense_left, scb_data->scbs_left); 5885 newcount = MIN(newcount, scb_data->sgs_left); 5886 newcount = MIN(newcount, (AHD_SCB_MAX_ALLOC - scb_data->numscbs)); 5887 scb_data->sense_left -= newcount; 5888 scb_data->scbs_left -= newcount; 5889 scb_data->sgs_left -= newcount; 5890 5891 for (i = 0; i < newcount; i++) { 5892 u_int col_tag; 5893 5894 struct scb_platform_data *pdata; 5895#ifndef __linux__ 5896 int error; 5897#endif 5898 next_scb = malloc(sizeof(*next_scb), M_DEVBUF, M_WAITOK); 5899 if (next_scb == NULL) 5900 break; 5901 5902 pdata = malloc(sizeof(*pdata), M_DEVBUF, M_WAITOK); 5903 if (pdata == NULL) { 5904 free(next_scb, M_DEVBUF); 5905 break; 5906 } 5907 next_scb->platform_data = pdata; 5908 next_scb->hscb_map = hscb_map; 5909 next_scb->sg_map = sg_map; 5910 next_scb->sense_map = sense_map; 5911 next_scb->sg_list = segs; 5912 next_scb->sense_data = sense_data; 5913 next_scb->sense_busaddr = sense_busaddr; 5914 memset(hscb, 0, sizeof(*hscb)); 5915 next_scb->hscb = hscb; 5916 hscb->hscb_busaddr = ahd_htole32(hscb_busaddr); 5917 KASSERT((vaddr_t)hscb >= (vaddr_t)hscb_map->vaddr && 5918 (vaddr_t)hscb < (vaddr_t)hscb_map->vaddr + PAGE_SIZE); 5919 5920 /* 5921 * The sequencer always starts with the second entry. 5922 * The first entry is embedded in the scb. 5923 */ 5924 next_scb->sg_list_busaddr = sg_busaddr; 5925 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 5926 next_scb->sg_list_busaddr 5927 += sizeof(struct ahd_dma64_seg); 5928 else 5929 next_scb->sg_list_busaddr += sizeof(struct ahd_dma_seg); 5930 next_scb->ahd_softc = ahd; 5931 next_scb->flags = SCB_FLAG_NONE; 5932 5933 error = bus_dmamap_create(ahd->parent_dmat, 5934 AHD_MAXTRANSFER_SIZE, AHD_NSEG, 5935 MAXBSIZE, 0, 5936 BUS_DMA_WAITOK|BUS_DMA_ALLOCNOW| 5937 ahd->sc_dmaflags, 5938 &next_scb->dmamap); 5939 if (error != 0) { 5940 free(next_scb, M_DEVBUF); 5941 free(pdata, M_DEVBUF); 5942 break; 5943 } 5944 next_scb->hscb->tag = ahd_htole16(scb_data->numscbs); 5945 col_tag = scb_data->numscbs ^ 0x100; 5946 next_scb->col_scb = ahd_find_scb_by_tag(ahd, col_tag); 5947 if (next_scb->col_scb != NULL) 5948 next_scb->col_scb->col_scb = next_scb; 5949 ahd_free_scb(ahd, next_scb); 5950 hscb++; 5951 hscb_busaddr += sizeof(*hscb); 5952 segs += ahd_sglist_size(ahd); 5953 sg_busaddr += ahd_sglist_size(ahd); 5954 sense_data += AHD_SENSE_BUFSIZE; 5955 sense_busaddr += AHD_SENSE_BUFSIZE; 5956 scb_data->numscbs++; 5957 } 5958 return (i); 5959} 5960 5961void 5962ahd_controller_info(struct ahd_softc *ahd, char *tbuf, size_t l) 5963{ 5964 const char *speed; 5965 const char *type; 5966 size_t len; 5967 5968 len = snprintf(tbuf, l, "%s: ", 5969 ahd_chip_names[ahd->chip & AHD_CHIPID_MASK]); 5970 if (len > l) 5971 return; 5972 speed = "Ultra320 "; 5973 if ((ahd->features & AHD_WIDE) != 0) { 5974 type = "Wide "; 5975 } else { 5976 type = "Single "; 5977 } 5978 len += snprintf(tbuf + len, l - len, "%s%sChannel %c, SCSI Id=%d, ", 5979 speed, type, ahd->channel, ahd->our_id); 5980 if (len > l) 5981 return; 5982 snprintf(tbuf + len, l - len, "%s, %d SCBs", ahd->bus_description, 5983 ahd->scb_data.maxhscbs); 5984} 5985 5986static const char * const channel_strings[] = { 5987 "Primary Low", 5988 "Primary High", 5989 "Secondary Low", 5990 "Secondary High" 5991}; 5992 5993static const char * const termstat_strings[] = { 5994 "Terminated Correctly", 5995 "Over Terminated", 5996 "Under Terminated", 5997 "Not Configured" 5998}; 5999 6000/* 6001 * Start the board, ready for normal operation 6002 */ 6003int 6004ahd_init(struct ahd_softc *ahd) 6005{ 6006 uint8_t *next_vaddr; 6007 bus_addr_t next_baddr; 6008 size_t driver_data_size; 6009 int i; 6010 int error; 6011 u_int warn_user; 6012 uint8_t current_sensing; 6013 uint8_t fstat; 6014 6015 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 6016 6017 ahd->stack_size = ahd_probe_stack_size(ahd); 6018 ahd->saved_stack = malloc(ahd->stack_size * sizeof(uint16_t), 6019 M_DEVBUF, M_WAITOK | M_ZERO); 6020 6021 /* 6022 * Verify that the compiler hasn't over-aggressively 6023 * padded important structures. 6024 */ 6025 if (sizeof(struct hardware_scb) != 64) 6026 panic("Hardware SCB size is incorrect"); 6027 6028#ifdef AHD_DEBUG 6029 if ((ahd_debug & AHD_DEBUG_SEQUENCER) != 0) 6030 ahd->flags |= AHD_SEQUENCER_DEBUG; 6031#endif 6032 6033 /* 6034 * Default to allowing initiator operations. 6035 */ 6036 ahd->flags |= AHD_INITIATORROLE; 6037 6038 /* 6039 * Only allow target mode features if this unit has them enabled. 6040 */ 6041 if ((AHD_TMODE_ENABLE & (0x1 << ahd->unit)) == 0) 6042 ahd->features &= ~AHD_TARGETMODE; 6043 6044 /* 6045 * DMA tag for our command fifos and other data in system memory 6046 * the card's sequencer must be able to access. For initiator 6047 * roles, we need to allocate space for the qoutfifo. When providing 6048 * for the target mode role, we must additionally provide space for 6049 * the incoming target command fifo. 6050 */ 6051 driver_data_size = AHD_SCB_MAX * sizeof(uint16_t) 6052 + sizeof(struct hardware_scb); 6053 if ((ahd->features & AHD_TARGETMODE) != 0) 6054 driver_data_size += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6055 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) 6056 driver_data_size += PKT_OVERRUN_BUFSIZE; 6057 ahd->shared_data_size = driver_data_size; 6058 6059 memset(&ahd->shared_data_map, 0, sizeof(ahd->shared_data_map)); 6060 ahd->sc_dmaflags = BUS_DMA_NOWAIT; 6061 6062 if (ahd_createdmamem(ahd->parent_dmat, ahd->shared_data_size, 6063 ahd->sc_dmaflags, 6064 &ahd->shared_data_map.dmamap, 6065 (void **)&ahd->shared_data_map.vaddr, 6066 &ahd->shared_data_map.physaddr, 6067 &ahd->shared_data_map.dmasegs, 6068 &ahd->shared_data_map.nseg, ahd_name(ahd), 6069 "shared data") < 0) 6070 return (ENOMEM); 6071 ahd->qoutfifo = (void *) ahd->shared_data_map.vaddr; 6072 6073 ahd->init_level++; 6074 6075 next_vaddr = (uint8_t *)&ahd->qoutfifo[AHD_QOUT_SIZE]; 6076 next_baddr = ahd->shared_data_map.physaddr + 6077 AHD_QOUT_SIZE * sizeof(uint16_t); 6078 if ((ahd->features & AHD_TARGETMODE) != 0) { 6079 ahd->targetcmds = (struct target_cmd *)next_vaddr; 6080 next_vaddr += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6081 next_baddr += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6082 } 6083 6084 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) { 6085 ahd->overrun_buf = next_vaddr; 6086 next_vaddr += PKT_OVERRUN_BUFSIZE; 6087 next_baddr += PKT_OVERRUN_BUFSIZE; 6088 } 6089 6090 /* 6091 * We need one SCB to serve as the "next SCB". Since the 6092 * tag identifier in this SCB will never be used, there is 6093 * no point in using a valid HSCB tag from an SCB pulled from 6094 * the standard free pool. So, we allocate this "sentinel" 6095 * specially from the DMA safe memory chunk used for the QOUTFIFO. 6096 */ 6097 ahd->next_queued_hscb = (struct hardware_scb *)next_vaddr; 6098 ahd->next_queued_hscb_map = &ahd->shared_data_map; 6099 ahd->next_queued_hscb->hscb_busaddr = ahd_htole32(next_baddr); 6100 6101 memset(&ahd->scb_data, 0, sizeof(struct scb_data)); 6102 6103 /* Allocate SCB data now that parent_dmat is initialized */ 6104 if (ahd_init_scbdata(ahd) != 0) 6105 return (ENOMEM); 6106 6107 if ((ahd->flags & AHD_INITIATORROLE) == 0) 6108 ahd->flags &= ~AHD_RESET_BUS_A; 6109 6110 /* 6111 * Before committing these settings to the chip, give 6112 * the OSM one last chance to modify our configuration. 6113 */ 6114 ahd_platform_init(ahd); 6115 6116 /* Bring up the chip. */ 6117 ahd_chip_init(ahd); 6118 6119 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 6120 6121 if ((ahd->flags & AHD_CURRENT_SENSING) == 0) 6122 goto init_done; 6123 6124 /* 6125 * Verify termination based on current draw and 6126 * warn user if the bus is over/under terminated. 6127 */ 6128 error = ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 6129 CURSENSE_ENB); 6130 if (error != 0) { 6131 printf("%s: current sensing timeout 1\n", ahd_name(ahd)); 6132 goto init_done; 6133 } 6134 for (i = 20, fstat = FLX_FSTAT_BUSY; 6135 (fstat & FLX_FSTAT_BUSY) != 0 && i; i--) { 6136 error = ahd_read_flexport(ahd, FLXADDR_FLEXSTAT, &fstat); 6137 if (error != 0) { 6138 printf("%s: current sensing timeout 2\n", 6139 ahd_name(ahd)); 6140 goto init_done; 6141 } 6142 } 6143 if (i == 0) { 6144 printf("%s: Timedout during current-sensing test\n", 6145 ahd_name(ahd)); 6146 goto init_done; 6147 } 6148 6149 /* Latch Current Sensing status. */ 6150 error = ahd_read_flexport(ahd, FLXADDR_CURRENT_STAT, ¤t_sensing); 6151 if (error != 0) { 6152 printf("%s: current sensing timeout 3\n", ahd_name(ahd)); 6153 goto init_done; 6154 } 6155 6156 /* Disable current sensing. */ 6157 ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 0); 6158 6159#ifdef AHD_DEBUG 6160 if ((ahd_debug & AHD_SHOW_TERMCTL) != 0) { 6161 printf("%s: current_sensing == 0x%x\n", 6162 ahd_name(ahd), current_sensing); 6163 } 6164#endif 6165 warn_user = 0; 6166 for (i = 0; i < 4; i++, current_sensing >>= FLX_CSTAT_SHIFT) { 6167 u_int term_stat; 6168 6169 term_stat = (current_sensing & FLX_CSTAT_MASK); 6170 switch (term_stat) { 6171 case FLX_CSTAT_OVER: 6172 case FLX_CSTAT_UNDER: 6173 warn_user++; 6174 /* FALLTHROUGH */ 6175 case FLX_CSTAT_INVALID: 6176 case FLX_CSTAT_OKAY: 6177 if (warn_user == 0 && bootverbose == 0) 6178 break; 6179 printf("%s: %s Channel %s\n", ahd_name(ahd), 6180 channel_strings[i], termstat_strings[term_stat]); 6181 break; 6182 } 6183 } 6184 if (warn_user) { 6185 printf("%s: WARNING. Termination is not configured correctly.\n" 6186 "%s: WARNING. SCSI bus operations may FAIL.\n", 6187 ahd_name(ahd), ahd_name(ahd)); 6188 } 6189init_done: 6190 ahd_reset_current_bus(ahd); 6191 ahd_restart(ahd); 6192 ahd_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_US, 6193 ahd_stat_timer, ahd); 6194 6195 return (0); 6196} 6197 6198/* 6199 * (Re)initialize chip state after a chip reset. 6200 */ 6201static void 6202ahd_chip_init(struct ahd_softc *ahd) 6203{ 6204 uint32_t busaddr; 6205 u_int sxfrctl1; 6206 u_int scsiseq_template; 6207 u_int wait; 6208 u_int i; 6209 u_int target; 6210 6211 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6212 /* 6213 * Take the LED out of diagnostic mode 6214 */ 6215 ahd_outb(ahd, SBLKCTL, ahd_inb(ahd, SBLKCTL) & ~(DIAGLEDEN|DIAGLEDON)); 6216 6217 /* 6218 * Return HS_MAILBOX to its default value. 6219 */ 6220 ahd->hs_mailbox = 0; 6221 ahd_outb(ahd, HS_MAILBOX, 0); 6222 6223 /* Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1. */ 6224 ahd_outb(ahd, IOWNID, ahd->our_id); 6225 ahd_outb(ahd, TOWNID, ahd->our_id); 6226 sxfrctl1 = (ahd->flags & AHD_TERM_ENB_A) != 0 ? STPWEN : 0; 6227 sxfrctl1 |= (ahd->flags & AHD_SPCHK_ENB_A) != 0 ? ENSPCHK : 0; 6228 if ((ahd->bugs & AHD_LONG_SETIMO_BUG) 6229 && (ahd->seltime != STIMESEL_MIN)) { 6230 /* 6231 * The selection timer duration is twice as long 6232 * as it should be. Halve it by adding "1" to 6233 * the user specified setting. 6234 */ 6235 sxfrctl1 |= ahd->seltime + STIMESEL_BUG_ADJ; 6236 } else { 6237 sxfrctl1 |= ahd->seltime; 6238 } 6239 6240 ahd_outb(ahd, SXFRCTL0, DFON); 6241 ahd_outb(ahd, SXFRCTL1, sxfrctl1|ahd->seltime|ENSTIMER|ACTNEGEN); 6242 ahd_outb(ahd, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR); 6243 6244 /* 6245 * Now that termination is set, wait for up 6246 * to 500ms for our transceivers to settle. If 6247 * the adapter does not have a cable attached, 6248 * the transceivers may never settle, so don't 6249 * complain if we fail here. 6250 */ 6251 for (wait = 10000; 6252 (ahd_inb(ahd, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait; 6253 wait--) 6254 ahd_delay(100); 6255 6256 /* Clear any false bus resets due to the transceivers settling */ 6257 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI); 6258 ahd_outb(ahd, CLRINT, CLRSCSIINT); 6259 6260 /* Initialize mode specific S/G state. */ 6261 for (i = 0; i < 2; i++) { 6262 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i); 6263 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 6264 ahd_outb(ahd, SG_STATE, 0); 6265 ahd_outb(ahd, CLRSEQINTSRC, 0xFF); 6266 ahd_outb(ahd, SEQIMODE, 6267 ENSAVEPTRS|ENCFG4DATA|ENCFG4ISTAT 6268 |ENCFG4TSTAT|ENCFG4ICMD|ENCFG4TCMD); 6269 } 6270 6271 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 6272 ahd_outb(ahd, DSCOMMAND0, ahd_inb(ahd, DSCOMMAND0)|MPARCKEN|CACHETHEN); 6273 ahd_outb(ahd, DFF_THRSH, RD_DFTHRSH_75|WR_DFTHRSH_75); 6274 ahd_outb(ahd, SIMODE0, ENIOERR|ENOVERRUN); 6275 ahd_outb(ahd, SIMODE3, ENNTRAMPERR|ENOSRAMPERR); 6276 if ((ahd->bugs & AHD_BUSFREEREV_BUG) != 0) { 6277 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|AUTO_MSGOUT_DE); 6278 } else { 6279 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|BUSFREEREV|AUTO_MSGOUT_DE); 6280 } 6281 ahd_outb(ahd, SCSCHKN, CURRFIFODEF|WIDERESEN|SHVALIDSTDIS); 6282 if ((ahd->chip & AHD_BUS_MASK) == AHD_PCIX) 6283 /* 6284 * Do not issue a target abort when a split completion 6285 * error occurs. Let our PCIX interrupt handler deal 6286 * with it instead. H2A4 Razor #625 6287 */ 6288 ahd_outb(ahd, PCIXCTL, ahd_inb(ahd, PCIXCTL) | SPLTSTADIS); 6289 6290 if ((ahd->bugs & AHD_LQOOVERRUN_BUG) != 0) 6291 ahd_outb(ahd, LQOSCSCTL, LQONOCHKOVER); 6292 6293 /* 6294 * Tweak IOCELL settings. 6295 */ 6296 if ((ahd->flags & AHD_HP_BOARD) != 0) { 6297 for (i = 0; i < NUMDSPS; i++) { 6298 ahd_outb(ahd, DSPSELECT, i); 6299 ahd_outb(ahd, WRTBIASCTL, WRTBIASCTL_HP_DEFAULT); 6300 } 6301#ifdef AHD_DEBUG 6302 if ((ahd_debug & AHD_SHOW_MISC) != 0) 6303 printf("%s: WRTBIASCTL now 0x%x\n", ahd_name(ahd), 6304 WRTBIASCTL_HP_DEFAULT); 6305#endif 6306 } 6307 ahd_setup_iocell_workaround(ahd); 6308 6309 /* 6310 * Enable LQI Manager interrupts. 6311 */ 6312 ahd_outb(ahd, LQIMODE1, ENLQIPHASE_LQ|ENLQIPHASE_NLQ|ENLIQABORT 6313 | ENLQICRCI_LQ|ENLQICRCI_NLQ|ENLQIBADLQI 6314 | ENLQIOVERI_LQ|ENLQIOVERI_NLQ); 6315 ahd_outb(ahd, LQOMODE0, ENLQOATNLQ|ENLQOATNPKT|ENLQOTCRC); 6316 /* 6317 * An interrupt from LQOBUSFREE is made redundant by the 6318 * BUSFREE interrupt. We choose to have the sequencer catch 6319 * LQOPHCHGINPKT errors manually for the command phase at the 6320 * start of a packetized selection case. 6321 ahd_outb(ahd, LQOMODE1, ENLQOBUSFREE|ENLQOPHACHGINPKT); 6322 */ 6323 ahd_outb(ahd, LQOMODE1, 0); 6324 6325 /* 6326 * Setup sequencer interrupt handlers. 6327 */ 6328 ahd_outw(ahd, INTVEC1_ADDR, ahd_resolve_seqaddr(ahd, LABEL_seq_isr)); 6329 ahd_outw(ahd, INTVEC2_ADDR, ahd_resolve_seqaddr(ahd, LABEL_timer_isr)); 6330 6331 /* 6332 * Setup SCB Offset registers. 6333 */ 6334 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) { 6335 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, 6336 pkt_long_lun)); 6337 } else { 6338 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, lun)); 6339 } 6340 ahd_outb(ahd, CMDLENPTR, offsetof(struct hardware_scb, cdb_len)); 6341 ahd_outb(ahd, ATTRPTR, offsetof(struct hardware_scb, task_attribute)); 6342 ahd_outb(ahd, FLAGPTR, offsetof(struct hardware_scb, task_management)); 6343 ahd_outb(ahd, CMDPTR, offsetof(struct hardware_scb, 6344 shared_data.idata.cdb)); 6345 ahd_outb(ahd, QNEXTPTR, 6346 offsetof(struct hardware_scb, next_hscb_busaddr)); 6347 ahd_outb(ahd, ABRTBITPTR, MK_MESSAGE_BIT_OFFSET); 6348 ahd_outb(ahd, ABRTBYTEPTR, offsetof(struct hardware_scb, control)); 6349 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) { 6350 ahd_outb(ahd, LUNLEN, 6351 sizeof(ahd->next_queued_hscb->pkt_long_lun) - 1); 6352 } else { 6353 ahd_outb(ahd, LUNLEN, LUNLEN_SINGLE_LEVEL_LUN); 6354 } 6355 ahd_outb(ahd, CDBLIMIT, SCB_CDB_LEN_PTR - 1); 6356 ahd_outb(ahd, MAXCMD, 0xFF); 6357 ahd_outb(ahd, SCBAUTOPTR, 6358 AUSCBPTR_EN | offsetof(struct hardware_scb, tag)); 6359 6360 /* We haven't been enabled for target mode yet. */ 6361 ahd_outb(ahd, MULTARGID, 0); 6362 ahd_outb(ahd, MULTARGID + 1, 0); 6363 6364 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6365 /* Initialize the negotiation table. */ 6366 if ((ahd->features & AHD_NEW_IOCELL_OPTS) == 0) { 6367 /* 6368 * Clear the spare bytes in the neg table to avoid 6369 * spurious parity errors. 6370 */ 6371 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6372 ahd_outb(ahd, NEGOADDR, target); 6373 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PER_DEV0); 6374 for (i = 0; i < AHD_NUM_PER_DEV_ANNEXCOLS; i++) 6375 ahd_outb(ahd, ANNEXDAT, 0); 6376 } 6377 } 6378 6379 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6380 struct ahd_devinfo devinfo; 6381 struct ahd_initiator_tinfo *tinfo; 6382 struct ahd_tmode_tstate *tstate; 6383 6384 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6385 target, &tstate); 6386 ahd_compile_devinfo(&devinfo, ahd->our_id, 6387 target, CAM_LUN_WILDCARD, 6388 'A', ROLE_INITIATOR); 6389 ahd_update_neg_table(ahd, &devinfo, &tinfo->curr); 6390 } 6391 6392 ahd_outb(ahd, CLRSINT3, NTRAMPERR|OSRAMPERR); 6393 ahd_outb(ahd, CLRINT, CLRSCSIINT); 6394 6395#if NEEDS_MORE_TESTING 6396 /* 6397 * Always enable abort on incoming L_Qs if this feature is 6398 * supported. We use this to catch invalid SCB references. 6399 */ 6400 if ((ahd->bugs & AHD_ABORT_LQI_BUG) == 0) 6401 ahd_outb(ahd, LQCTL1, ABORTPENDING); 6402 else 6403#endif 6404 ahd_outb(ahd, LQCTL1, 0); 6405 6406 /* All of our queues are empty */ 6407 ahd->qoutfifonext = 0; 6408 ahd->qoutfifonext_valid_tag = QOUTFIFO_ENTRY_VALID_LE; 6409 ahd_outb(ahd, QOUTFIFO_ENTRY_VALID_TAG, QOUTFIFO_ENTRY_VALID >> 8); 6410 for (i = 0; i < AHD_QOUT_SIZE; i++) 6411 ahd->qoutfifo[i] = 0; 6412 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_PREREAD); 6413 6414 ahd->qinfifonext = 0; 6415 for (i = 0; i < AHD_QIN_SIZE; i++) 6416 ahd->qinfifo[i] = SCB_LIST_NULL; 6417 6418 if ((ahd->features & AHD_TARGETMODE) != 0) { 6419 /* All target command blocks start out invalid. */ 6420 for (i = 0; i < AHD_TMODE_CMDS; i++) 6421 ahd->targetcmds[i].cmd_valid = 0; 6422 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_PREREAD); 6423 ahd->tqinfifonext = 1; 6424 ahd_outb(ahd, KERNEL_TQINPOS, ahd->tqinfifonext - 1); 6425 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext); 6426 } 6427 6428 /* Initialize Scratch Ram. */ 6429 ahd_outb(ahd, SEQ_FLAGS, 0); 6430 ahd_outb(ahd, SEQ_FLAGS2, 0); 6431 6432 /* We don't have any waiting selections */ 6433 ahd_outw(ahd, WAITING_TID_HEAD, SCB_LIST_NULL); 6434 ahd_outw(ahd, WAITING_TID_TAIL, SCB_LIST_NULL); 6435 for (i = 0; i < AHD_NUM_TARGETS; i++) { 6436 ahd_outw(ahd, WAITING_SCB_TAILS + (2 * i), SCB_LIST_NULL); 6437 } 6438 6439 /* 6440 * Nobody is waiting to be DMAed into the QOUTFIFO. 6441 */ 6442 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL); 6443 ahd_outw(ahd, COMPLETE_SCB_DMAINPROG_HEAD, SCB_LIST_NULL); 6444 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL); 6445 6446 /* 6447 * The Freeze Count is 0. 6448 */ 6449 ahd_outw(ahd, QFREEZE_COUNT, 0); 6450 6451 /* 6452 * Tell the sequencer where it can find our arrays in memory. 6453 */ 6454 busaddr = ahd->shared_data_map.physaddr; 6455 ahd_outb(ahd, SHARED_DATA_ADDR, busaddr & 0xFF); 6456 ahd_outb(ahd, SHARED_DATA_ADDR + 1, (busaddr >> 8) & 0xFF); 6457 ahd_outb(ahd, SHARED_DATA_ADDR + 2, (busaddr >> 16) & 0xFF); 6458 ahd_outb(ahd, SHARED_DATA_ADDR + 3, (busaddr >> 24) & 0xFF); 6459 ahd_outb(ahd, QOUTFIFO_NEXT_ADDR, busaddr & 0xFF); 6460 ahd_outb(ahd, QOUTFIFO_NEXT_ADDR + 1, (busaddr >> 8) & 0xFF); 6461 ahd_outb(ahd, QOUTFIFO_NEXT_ADDR + 2, (busaddr >> 16) & 0xFF); 6462 ahd_outb(ahd, QOUTFIFO_NEXT_ADDR + 3, (busaddr >> 24) & 0xFF); 6463 /* 6464 * Setup the allowed SCSI Sequences based on operational mode. 6465 * If we are a target, we'll enable select in operations once 6466 * we've had a lun enabled. 6467 */ 6468 scsiseq_template = ENAUTOATNP; 6469 if ((ahd->flags & AHD_INITIATORROLE) != 0) 6470 scsiseq_template |= ENRSELI; 6471 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq_template); 6472 6473 /* There are no busy SCBs yet. */ 6474 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6475 int lun; 6476 6477 for (lun = 0; lun < AHD_NUM_LUNS_NONPKT; lun++) 6478 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(target, 'A', lun)); 6479 } 6480 6481 /* 6482 * Initialize the group code to command length table. 6483 * Vendor Unique codes are set to 0 so we only capture 6484 * the first byte of the cdb. These can be overridden 6485 * when target mode is enabled. 6486 */ 6487 ahd_outb(ahd, CMDSIZE_TABLE, 5); 6488 ahd_outb(ahd, CMDSIZE_TABLE + 1, 9); 6489 ahd_outb(ahd, CMDSIZE_TABLE + 2, 9); 6490 ahd_outb(ahd, CMDSIZE_TABLE + 3, 0); 6491 ahd_outb(ahd, CMDSIZE_TABLE + 4, 15); 6492 ahd_outb(ahd, CMDSIZE_TABLE + 5, 11); 6493 ahd_outb(ahd, CMDSIZE_TABLE + 6, 0); 6494 ahd_outb(ahd, CMDSIZE_TABLE + 7, 0); 6495 6496 /* Tell the sequencer of our initial queue positions */ 6497 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 6498 ahd_outb(ahd, QOFF_CTLSTA, SCB_QSIZE_512); 6499 ahd->qinfifonext = 0; 6500 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 6501 ahd_set_hescb_qoff(ahd, 0); 6502 ahd_set_snscb_qoff(ahd, 0); 6503 ahd_set_sescb_qoff(ahd, 0); 6504 ahd_set_sdscb_qoff(ahd, 0); 6505 6506 /* 6507 * Tell the sequencer which SCB will be the next one it receives. 6508 */ 6509 busaddr = ahd_le32toh(ahd->next_queued_hscb->hscb_busaddr); 6510 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 0, busaddr & 0xFF); 6511 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 1, (busaddr >> 8) & 0xFF); 6512 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 2, (busaddr >> 16) & 0xFF); 6513 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 3, (busaddr >> 24) & 0xFF); 6514 6515 /* 6516 * Default to coalescing disabled. 6517 */ 6518 ahd_outw(ahd, INT_COALESCING_CMDCOUNT, 0); 6519 ahd_outw(ahd, CMDS_PENDING, 0); 6520 ahd_update_coalescing_values(ahd, ahd->int_coalescing_timer, 6521 ahd->int_coalescing_maxcmds, 6522 ahd->int_coalescing_mincmds); 6523 ahd_enable_coalescing(ahd, FALSE); 6524 6525 ahd_loadseq(ahd); 6526 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6527} 6528 6529/* 6530 * Setup default device and controller settings. 6531 * This should only be called if our probe has 6532 * determined that no configuration data is available. 6533 */ 6534int 6535ahd_default_config(struct ahd_softc *ahd) 6536{ 6537 int targ; 6538 6539 ahd->our_id = 7; 6540 6541 /* 6542 * Allocate a tstate to house information for our 6543 * initiator presence on the bus as well as the user 6544 * data for any target mode initiator. 6545 */ 6546 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) { 6547 printf("%s: unable to allocate ahd_tmode_tstate. " 6548 "Failing attach\n", ahd_name(ahd)); 6549 return (ENOMEM); 6550 } 6551 6552 for (targ = 0; targ < AHD_NUM_TARGETS; targ++) { 6553 struct ahd_devinfo devinfo; 6554 struct ahd_initiator_tinfo *tinfo; 6555 struct ahd_tmode_tstate *tstate; 6556 uint16_t target_mask; 6557 6558 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6559 targ, &tstate); 6560 /* 6561 * We support SPC2 and SPI4. 6562 */ 6563 tinfo->user.protocol_version = 4; 6564 tinfo->user.transport_version = 4; 6565 6566 target_mask = 0x01 << targ; 6567 ahd->user_discenable |= target_mask; 6568 tstate->discenable |= target_mask; 6569 ahd->user_tagenable |= target_mask; 6570#ifdef AHD_FORCE_160 6571 tinfo->user.period = AHD_SYNCRATE_DT; 6572#else 6573 tinfo->user.period = AHD_SYNCRATE_160; 6574#endif 6575 tinfo->user.offset= MAX_OFFSET; 6576 tinfo->user.ppr_options = MSG_EXT_PPR_RDSTRM 6577 | MSG_EXT_PPR_WRFLOW 6578 | MSG_EXT_PPR_HOLDMCS 6579 | MSG_EXT_PPR_IU_REQ 6580 | MSG_EXT_PPR_QAS_REQ 6581 | MSG_EXT_PPR_DT_REQ; 6582 if ((ahd->features & AHD_RTI) != 0) 6583 tinfo->user.ppr_options |= MSG_EXT_PPR_RTI; 6584 6585 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT; 6586 6587 /* 6588 * Start out Async/Narrow/Untagged and with 6589 * conservative protocol support. 6590 */ 6591 tinfo->goal.protocol_version = 2; 6592 tinfo->goal.transport_version = 2; 6593 tinfo->curr.protocol_version = 2; 6594 tinfo->curr.transport_version = 2; 6595 ahd_compile_devinfo(&devinfo, ahd->our_id, 6596 targ, CAM_LUN_WILDCARD, 6597 'A', ROLE_INITIATOR); 6598 tstate->tagenable &= ~target_mask; 6599 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 6600 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); 6601 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0, 6602 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL, 6603 /*paused*/TRUE); 6604 } 6605 return (0); 6606} 6607 6608/* 6609 * Parse device configuration information. 6610 */ 6611int 6612ahd_parse_cfgdata(struct ahd_softc *ahd, struct seeprom_config *sc) 6613{ 6614 int targ; 6615 int max_targ; 6616 6617 max_targ = sc->max_targets & CFMAXTARG; 6618 ahd->our_id = sc->brtime_id & CFSCSIID; 6619 6620 /* 6621 * Allocate a tstate to house information for our 6622 * initiator presence on the bus as well as the user 6623 * data for any target mode initiator. 6624 */ 6625 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) { 6626 printf("%s: unable to allocate ahd_tmode_tstate. " 6627 "Failing attach\n", ahd_name(ahd)); 6628 return (ENOMEM); 6629 } 6630 6631 for (targ = 0; targ < max_targ; targ++) { 6632 struct ahd_devinfo devinfo; 6633 struct ahd_initiator_tinfo *tinfo; 6634 struct ahd_transinfo *user_tinfo; 6635 struct ahd_tmode_tstate *tstate; 6636 uint16_t target_mask; 6637 6638 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6639 targ, &tstate); 6640 user_tinfo = &tinfo->user; 6641 6642 /* 6643 * We support SPC2 and SPI4. 6644 */ 6645 tinfo->user.protocol_version = 4; 6646 tinfo->user.transport_version = 4; 6647 6648 target_mask = 0x01 << targ; 6649 ahd->user_discenable &= ~target_mask; 6650 tstate->discenable &= ~target_mask; 6651 ahd->user_tagenable &= ~target_mask; 6652 if (sc->device_flags[targ] & CFDISC) { 6653 tstate->discenable |= target_mask; 6654 ahd->user_discenable |= target_mask; 6655 ahd->user_tagenable |= target_mask; 6656 } else { 6657 /* 6658 * Cannot be packetized without disconnection. 6659 */ 6660 sc->device_flags[targ] &= ~CFPACKETIZED; 6661 } 6662 6663 user_tinfo->ppr_options = 0; 6664 user_tinfo->period = (sc->device_flags[targ] & CFXFER); 6665 if (user_tinfo->period < CFXFER_ASYNC) { 6666 if (user_tinfo->period <= AHD_PERIOD_10MHz) 6667 user_tinfo->ppr_options |= MSG_EXT_PPR_DT_REQ; 6668 user_tinfo->offset = MAX_OFFSET; 6669 } else { 6670 user_tinfo->offset = 0; 6671 user_tinfo->period = AHD_ASYNC_XFER_PERIOD; 6672 } 6673#ifdef AHD_FORCE_160 6674 if (user_tinfo->period <= AHD_SYNCRATE_160) 6675 user_tinfo->period = AHD_SYNCRATE_DT; 6676#endif 6677 6678 if ((sc->device_flags[targ] & CFPACKETIZED) != 0) { 6679 user_tinfo->ppr_options |= MSG_EXT_PPR_RDSTRM 6680 | MSG_EXT_PPR_WRFLOW 6681 | MSG_EXT_PPR_HOLDMCS 6682 | MSG_EXT_PPR_IU_REQ; 6683 if ((ahd->features & AHD_RTI) != 0) 6684 user_tinfo->ppr_options |= MSG_EXT_PPR_RTI; 6685 } 6686 6687 if ((sc->device_flags[targ] & CFQAS) != 0) 6688 user_tinfo->ppr_options |= MSG_EXT_PPR_QAS_REQ; 6689 6690 if ((sc->device_flags[targ] & CFWIDEB) != 0) 6691 user_tinfo->width = MSG_EXT_WDTR_BUS_16_BIT; 6692 else 6693 user_tinfo->width = MSG_EXT_WDTR_BUS_8_BIT; 6694#ifdef AHD_DEBUG 6695 if ((ahd_debug & AHD_SHOW_MISC) != 0) 6696 printf("(%d): %x:%x:%x:%x\n", targ, user_tinfo->width, 6697 user_tinfo->period, user_tinfo->offset, 6698 user_tinfo->ppr_options); 6699#endif 6700 /* 6701 * Start out Async/Narrow/Untagged and with 6702 * conservative protocol support. 6703 */ 6704 tstate->tagenable &= ~target_mask; 6705 tinfo->goal.protocol_version = 2; 6706 tinfo->goal.transport_version = 2; 6707 tinfo->curr.protocol_version = 2; 6708 tinfo->curr.transport_version = 2; 6709 ahd_compile_devinfo(&devinfo, ahd->our_id, 6710 targ, CAM_LUN_WILDCARD, 6711 'A', ROLE_INITIATOR); 6712 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 6713 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); 6714 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0, 6715 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL, 6716 /*paused*/TRUE); 6717 } 6718 6719 ahd->flags &= ~AHD_SPCHK_ENB_A; 6720 if (sc->bios_control & CFSPARITY) 6721 ahd->flags |= AHD_SPCHK_ENB_A; 6722 6723 ahd->flags &= ~AHD_RESET_BUS_A; 6724 if (sc->bios_control & CFRESETB) 6725 ahd->flags |= AHD_RESET_BUS_A; 6726 6727 ahd->flags &= ~AHD_EXTENDED_TRANS_A; 6728 if (sc->bios_control & CFEXTEND) 6729 ahd->flags |= AHD_EXTENDED_TRANS_A; 6730 6731 ahd->flags &= ~AHD_BIOS_ENABLED; 6732 if ((sc->bios_control & CFBIOSSTATE) == CFBS_ENABLED) 6733 ahd->flags |= AHD_BIOS_ENABLED; 6734 6735 ahd->flags &= ~AHD_STPWLEVEL_A; 6736 if ((sc->adapter_control & CFSTPWLEVEL) != 0) 6737 ahd->flags |= AHD_STPWLEVEL_A; 6738 6739 return (0); 6740} 6741 6742/* 6743 * Parse device configuration information. 6744 */ 6745int 6746ahd_parse_vpddata(struct ahd_softc *ahd, struct vpd_config *vpd) 6747{ 6748 int error; 6749 6750 error = ahd_verify_vpd_cksum(vpd); 6751 if (error == 0) 6752 return (EINVAL); 6753 if ((vpd->bios_flags & VPDBOOTHOST) != 0) 6754 ahd->flags |= AHD_BOOT_CHANNEL; 6755 return (0); 6756} 6757 6758void 6759ahd_intr_enable(struct ahd_softc *ahd, int enable) 6760{ 6761 u_int hcntrl; 6762 6763 hcntrl = ahd_inb(ahd, HCNTRL); 6764 hcntrl &= ~INTEN; 6765 ahd->pause &= ~INTEN; 6766 ahd->unpause &= ~INTEN; 6767 if (enable) { 6768 hcntrl |= INTEN; 6769 ahd->pause |= INTEN; 6770 ahd->unpause |= INTEN; 6771 } 6772 ahd_outb(ahd, HCNTRL, hcntrl); 6773} 6774 6775void 6776ahd_update_coalescing_values(struct ahd_softc *ahd, u_int timer, u_int maxcmds, 6777 u_int mincmds) 6778{ 6779 if (timer > AHD_TIMER_MAX_US) 6780 timer = AHD_TIMER_MAX_US; 6781 ahd->int_coalescing_timer = timer; 6782 6783 if (maxcmds > AHD_INT_COALESCING_MAXCMDS_MAX) 6784 maxcmds = AHD_INT_COALESCING_MAXCMDS_MAX; 6785 if (mincmds > AHD_INT_COALESCING_MINCMDS_MAX) 6786 mincmds = AHD_INT_COALESCING_MINCMDS_MAX; 6787 ahd->int_coalescing_maxcmds = maxcmds; 6788 ahd_outw(ahd, INT_COALESCING_TIMER, timer / AHD_TIMER_US_PER_TICK); 6789 ahd_outb(ahd, INT_COALESCING_MAXCMDS, -maxcmds); 6790 ahd_outb(ahd, INT_COALESCING_MINCMDS, -mincmds); 6791} 6792 6793void 6794ahd_enable_coalescing(struct ahd_softc *ahd, int enable) 6795{ 6796 6797 ahd->hs_mailbox &= ~ENINT_COALESCE; 6798 if (enable) 6799 ahd->hs_mailbox |= ENINT_COALESCE; 6800 ahd_outb(ahd, HS_MAILBOX, ahd->hs_mailbox); 6801 ahd_flush_device_writes(ahd); 6802 ahd_run_qoutfifo(ahd); 6803} 6804 6805/* 6806 * Ensure that the card is paused in a location 6807 * outside of all critical sections and that all 6808 * pending work is completed prior to returning. 6809 * This routine should only be called from outside 6810 * an interrupt context. 6811 */ 6812void 6813ahd_pause_and_flushwork(struct ahd_softc *ahd) 6814{ 6815 u_int intstat; 6816 u_int maxloops; 6817 u_int qfreeze_cnt; 6818 6819 maxloops = 1000; 6820 ahd->flags |= AHD_ALL_INTERRUPTS; 6821 ahd_pause(ahd); 6822 /* 6823 * Increment the QFreeze Count so that the sequencer 6824 * will not start new selections. We do this only 6825 * until we are safely paused without further selections 6826 * pending. 6827 */ 6828 ahd_outw(ahd, QFREEZE_COUNT, ahd_inw(ahd, QFREEZE_COUNT) + 1); 6829 ahd_outb(ahd, SEQ_FLAGS2, ahd_inb(ahd, SEQ_FLAGS2) | SELECTOUT_QFROZEN); 6830 do { 6831 struct scb *waiting_scb; 6832 6833 ahd_unpause(ahd); 6834 ahd_intr(ahd); 6835 ahd_pause(ahd); 6836 ahd_clear_critical_section(ahd); 6837 intstat = ahd_inb(ahd, INTSTAT); 6838 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6839 if ((ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) == 0) 6840 ahd_outb(ahd, SCSISEQ0, 6841 ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 6842 /* 6843 * In the non-packetized case, the sequencer (for Rev A), 6844 * relies on ENSELO remaining set after SELDO. The hardware 6845 * auto-clears ENSELO in the packetized case. 6846 */ 6847 waiting_scb = ahd_lookup_scb(ahd, 6848 ahd_inw(ahd, WAITING_TID_HEAD)); 6849 if (waiting_scb != NULL 6850 && (waiting_scb->flags & SCB_PACKETIZED) == 0 6851 && (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) != 0) 6852 ahd_outb(ahd, SCSISEQ0, 6853 ahd_inb(ahd, SCSISEQ0) | ENSELO); 6854 } while (--maxloops 6855 && (intstat != 0xFF || (ahd->features & AHD_REMOVABLE) == 0) 6856 && ((intstat & INT_PEND) != 0 6857 || (ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0 6858 || (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) != 0)); 6859 if (maxloops == 0) { 6860 printf("Infinite interrupt loop, INTSTAT = %x", 6861 ahd_inb(ahd, INTSTAT)); 6862 } 6863 qfreeze_cnt = ahd_inw(ahd, QFREEZE_COUNT); 6864 if (qfreeze_cnt == 0) { 6865 printf("%s: ahd_pause_and_flushwork with 0 qfreeze count!\n", 6866 ahd_name(ahd)); 6867 } else { 6868 qfreeze_cnt--; 6869 } 6870 ahd_outw(ahd, QFREEZE_COUNT, qfreeze_cnt); 6871 if (qfreeze_cnt == 0) 6872 ahd_outb(ahd, SEQ_FLAGS2, 6873 ahd_inb(ahd, SEQ_FLAGS2) & ~SELECTOUT_QFROZEN); 6874 6875 ahd_flush_qoutfifo(ahd); 6876 6877 ahd_platform_flushwork(ahd); 6878 ahd->flags &= ~AHD_ALL_INTERRUPTS; 6879} 6880 6881int 6882ahd_suspend(struct ahd_softc *ahd) 6883{ 6884 6885 ahd_pause_and_flushwork(ahd); 6886 6887 if (LIST_FIRST(&ahd->pending_scbs) != NULL) { 6888 ahd_unpause(ahd); 6889 return (EBUSY); 6890 } 6891 ahd_shutdown(ahd); 6892 return (0); 6893} 6894 6895int 6896ahd_resume(struct ahd_softc *ahd) 6897{ 6898 6899 ahd_reset(ahd, /*reinit*/TRUE); 6900 ahd_intr_enable(ahd, TRUE); 6901 ahd_restart(ahd); 6902 return (0); 6903} 6904 6905/************************** Busy Target Table *********************************/ 6906/* 6907 * Set SCBPTR to the SCB that contains the busy 6908 * table entry for TCL. Return the offset into 6909 * the SCB that contains the entry for TCL. 6910 * saved_scbid is dereferenced and set to the 6911 * scbid that should be restored once manipulation 6912 * of the TCL entry is complete. 6913 */ 6914static inline u_int 6915ahd_index_busy_tcl(struct ahd_softc *ahd, u_int *saved_scbid, u_int tcl) 6916{ 6917 /* 6918 * Index to the SCB that contains the busy entry. 6919 */ 6920 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 6921 *saved_scbid = ahd_get_scbptr(ahd); 6922 ahd_set_scbptr(ahd, TCL_LUN(tcl) 6923 | ((TCL_TARGET_OFFSET(tcl) & 0xC) << 4)); 6924 6925 /* 6926 * And now calculate the SCB offset to the entry. 6927 * Each entry is 2 bytes wide, hence the 6928 * multiplication by 2. 6929 */ 6930 return (((TCL_TARGET_OFFSET(tcl) & 0x3) << 1) + SCB_DISCONNECTED_LISTS); 6931} 6932 6933/* 6934 * Return the untagged transaction id for a given target/channel lun. 6935 */ 6936u_int 6937ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl) 6938{ 6939 u_int scbid; 6940 u_int scb_offset; 6941 u_int saved_scbptr; 6942 6943 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl); 6944 scbid = ahd_inw_scbram(ahd, scb_offset); 6945 ahd_set_scbptr(ahd, saved_scbptr); 6946 return (scbid); 6947} 6948 6949void 6950ahd_busy_tcl(struct ahd_softc *ahd, u_int tcl, u_int scbid) 6951{ 6952 u_int scb_offset; 6953 u_int saved_scbptr; 6954 6955 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl); 6956 ahd_outw(ahd, scb_offset, scbid); 6957 ahd_set_scbptr(ahd, saved_scbptr); 6958} 6959 6960/************************** SCB and SCB queue management **********************/ 6961int 6962ahd_match_scb(struct ahd_softc *ahd, struct scb *scb, int target, 6963 char channel, int lun, u_int tag, role_t role) 6964{ 6965 int targ = SCB_GET_TARGET(ahd, scb); 6966 char chan = SCB_GET_CHANNEL(ahd, scb); 6967 int slun = SCB_GET_LUN(scb); 6968 int match; 6969 6970 match = ((chan == channel) || (channel == ALL_CHANNELS)); 6971 if (match != 0) 6972 match = ((targ == target) || (target == CAM_TARGET_WILDCARD)); 6973 if (match != 0) 6974 match = ((lun == slun) || (lun == CAM_LUN_WILDCARD)); 6975 if (match != 0) { 6976#if AHD_TARGET_MODE 6977 int group; 6978 6979 group = XPT_FC_GROUP(scb->io_ctx->ccb_h.func_code); 6980 if (role == ROLE_INITIATOR) { 6981 match = (group != XPT_FC_GROUP_TMODE) 6982 && ((tag == SCB_GET_TAG(scb)) 6983 || (tag == SCB_LIST_NULL)); 6984 } else if (role == ROLE_TARGET) { 6985 match = (group == XPT_FC_GROUP_TMODE) 6986 && ((tag == scb->io_ctx->csio.tag_id) 6987 || (tag == SCB_LIST_NULL)); 6988 } 6989#else /* !AHD_TARGET_MODE */ 6990 match = ((tag == SCB_GET_TAG(scb)) || (tag == SCB_LIST_NULL)); 6991#endif /* AHD_TARGET_MODE */ 6992 } 6993 6994 return match; 6995} 6996 6997void 6998ahd_freeze_devq(struct ahd_softc *ahd, struct scb *scb) 6999{ 7000 int target; 7001 char channel; 7002 int lun; 7003 7004 target = SCB_GET_TARGET(ahd, scb); 7005 lun = SCB_GET_LUN(scb); 7006 channel = SCB_GET_CHANNEL(ahd, scb); 7007 7008 ahd_search_qinfifo(ahd, target, channel, lun, 7009 /*tag*/SCB_LIST_NULL, ROLE_UNKNOWN, 7010 CAM_REQUEUE_REQ, SEARCH_COMPLETE); 7011 7012 ahd_platform_freeze_devq(ahd, scb); 7013} 7014 7015void 7016ahd_qinfifo_requeue_tail(struct ahd_softc *ahd, struct scb *scb) 7017{ 7018 struct scb *prev_scb; 7019 ahd_mode_state saved_modes; 7020 7021 saved_modes = ahd_save_modes(ahd); 7022 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7023 prev_scb = NULL; 7024 if (ahd_qinfifo_count(ahd) != 0) { 7025 u_int prev_tag; 7026 u_int prev_pos; 7027 7028 prev_pos = AHD_QIN_WRAP(ahd->qinfifonext - 1); 7029 prev_tag = ahd->qinfifo[prev_pos]; 7030 prev_scb = ahd_lookup_scb(ahd, prev_tag); 7031 } 7032 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7033 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 7034 ahd_restore_modes(ahd, saved_modes); 7035} 7036 7037static void 7038ahd_qinfifo_requeue(struct ahd_softc *ahd, struct scb *prev_scb, 7039 struct scb *scb) 7040{ 7041 if (prev_scb == NULL) { 7042 uint32_t busaddr; 7043 7044 busaddr = ahd_le32toh(scb->hscb->hscb_busaddr); 7045 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 0, busaddr & 0xFF); 7046 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 1, (busaddr >> 8) & 0xFF); 7047 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 2, (busaddr >> 16) & 0xFF); 7048 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 3, (busaddr >> 24) & 0xFF); 7049 } else { 7050 prev_scb->hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr; 7051 ahd_sync_scb(ahd, prev_scb, 7052 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 7053 } 7054 ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb); 7055 ahd->qinfifonext++; 7056 scb->hscb->next_hscb_busaddr = ahd->next_queued_hscb->hscb_busaddr; 7057 ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 7058} 7059 7060static int 7061ahd_qinfifo_count(struct ahd_softc *ahd) 7062{ 7063 u_int qinpos; 7064 u_int wrap_qinpos; 7065 u_int wrap_qinfifonext; 7066 7067 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 7068 qinpos = ahd_get_snscb_qoff(ahd); 7069 wrap_qinpos = AHD_QIN_WRAP(qinpos); 7070 wrap_qinfifonext = AHD_QIN_WRAP(ahd->qinfifonext); 7071 if (wrap_qinfifonext >= wrap_qinpos) 7072 return (wrap_qinfifonext - wrap_qinpos); 7073 else 7074 return (wrap_qinfifonext 7075 + NUM_ELEMENTS(ahd->qinfifo) - wrap_qinpos); 7076} 7077 7078void 7079ahd_reset_cmds_pending(struct ahd_softc *ahd) 7080{ 7081 struct scb *scb; 7082 ahd_mode_state saved_modes; 7083 u_int pending_cmds; 7084 7085 saved_modes = ahd_save_modes(ahd); 7086 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7087 7088 /* 7089 * Don't count any commands as outstanding that the 7090 * sequencer has already marked for completion. 7091 */ 7092 ahd_flush_qoutfifo(ahd); 7093 7094 pending_cmds = 0; 7095 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 7096 pending_cmds++; 7097 } 7098 ahd_outw(ahd, CMDS_PENDING, pending_cmds - ahd_qinfifo_count(ahd)); 7099 ahd_restore_modes(ahd, saved_modes); 7100 ahd->flags &= ~AHD_UPDATE_PEND_CMDS; 7101} 7102 7103int 7104ahd_search_qinfifo(struct ahd_softc *ahd, int target, char channel, 7105 int lun, u_int tag, role_t role, uint32_t status, 7106 ahd_search_action action) 7107{ 7108 struct scb *scb; 7109 struct scb *prev_scb; 7110 ahd_mode_state saved_modes; 7111 u_int qinstart; 7112 u_int qinpos; 7113 u_int qintail; 7114 u_int tid_next; 7115 u_int tid_prev; 7116 u_int scbid; 7117 u_int savedscbptr; 7118 uint32_t busaddr; 7119 int found; 7120 int targets; 7121 int pending_cmds; 7122 7123 /* Must be in CCHAN mode */ 7124 saved_modes = ahd_save_modes(ahd); 7125 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7126 7127 /* 7128 * Halt any pending SCB DMA. The sequencer will reinitiate 7129 * this DMA if the qinfifo is not empty once we unpause. 7130 */ 7131 if ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN|CCSCBDIR)) 7132 == (CCARREN|CCSCBEN|CCSCBDIR)) { 7133 ahd_outb(ahd, CCSCBCTL, 7134 ahd_inb(ahd, CCSCBCTL) & ~(CCARREN|CCSCBEN)); 7135 while ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN)) != 0) 7136 ; 7137 } 7138 /* Determine sequencer's position in the qinfifo. */ 7139 qintail = AHD_QIN_WRAP(ahd->qinfifonext); 7140 qinstart = ahd_get_snscb_qoff(ahd); 7141 qinpos = AHD_QIN_WRAP(qinstart); 7142 found = 0; 7143 prev_scb = NULL; 7144 7145 pending_cmds = 0; 7146 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 7147 pending_cmds++; 7148 } 7149 (void)ahd_qinfifo_count(ahd); 7150 7151 if (action == SEARCH_PRINT) { 7152 printf("qinstart = 0x%x qinfifonext = 0x%x\n", 7153 qinstart, ahd->qinfifonext); 7154 } 7155 7156 /* 7157 * Start with an empty queue. Entries that are not chosen 7158 * for removal will be re-added to the queue as we go. 7159 */ 7160 ahd->qinfifonext = qinstart; 7161 busaddr = ahd_le32toh(ahd->next_queued_hscb->hscb_busaddr); 7162 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 0, busaddr & 0xFF); 7163 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 1, (busaddr >> 8) & 0xFF); 7164 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 2, (busaddr >> 16) & 0xFF); 7165 ahd_outb(ahd, NEXT_QUEUED_SCB_ADDR + 3, (busaddr >> 24) & 0xFF); 7166 7167 while (qinpos != qintail) { 7168 scb = ahd_lookup_scb(ahd, ahd->qinfifo[qinpos]); 7169 if (scb == NULL) { 7170 panic("Loop 1\n"); 7171 } 7172 7173 if (ahd_match_scb(ahd, scb, target, channel, lun, tag, role)) { 7174 /* 7175 * We found an scb that needs to be acted on. 7176 */ 7177 found++; 7178 switch (action) { 7179 case SEARCH_COMPLETE: 7180 { 7181 cam_status ostat; 7182 cam_status cstat; 7183 7184 ostat = ahd_get_scsi_status(scb); 7185 if (ostat == CAM_REQ_INPROG) 7186 ahd_set_scsi_status(scb, status); 7187 cstat = ahd_get_transaction_status(scb); 7188 if (cstat != CAM_REQ_CMP) 7189 ahd_freeze_scb(scb); 7190 if ((scb->flags & SCB_ACTIVE) == 0) 7191 printf("Inactive SCB in qinfifo\n"); 7192 if ((cam_status)scb->xs->error != CAM_REQ_CMP) 7193 printf("SEARCH_COMPLETE(0x%x):" 7194 " ostat 0x%x, cstat 0x%x, " 7195 "xs_error 0x%x\n", 7196 SCB_GET_TAG(scb), ostat, cstat, 7197 scb->xs->error); 7198 ahd_done(ahd, scb); 7199 7200 /* FALLTHROUGH */ 7201 } 7202 case SEARCH_REMOVE: 7203 break; 7204 case SEARCH_PRINT: 7205 printf(" 0x%x", ahd->qinfifo[qinpos]); 7206 /* FALLTHROUGH */ 7207 case SEARCH_COUNT: 7208 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7209 prev_scb = scb; 7210 break; 7211 } 7212 } else { 7213 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7214 prev_scb = scb; 7215 } 7216 qinpos = AHD_QIN_WRAP(qinpos+1); 7217 } 7218 7219 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 7220 7221 if (action == SEARCH_PRINT) 7222 printf("\nWAITING_TID_QUEUES:\n"); 7223 7224 /* 7225 * Search waiting for selection lists. We traverse the 7226 * list of "their ids" waiting for selection and, if 7227 * appropriate, traverse the SCBs of each "their id" 7228 * looking for matches. 7229 */ 7230 savedscbptr = ahd_get_scbptr(ahd); 7231 tid_next = ahd_inw(ahd, WAITING_TID_HEAD); 7232 tid_prev = SCB_LIST_NULL; 7233 targets = 0; 7234 for (scbid = tid_next; !SCBID_IS_NULL(scbid); scbid = tid_next) { 7235 u_int tid_head; 7236 7237 /* 7238 * We limit based on the number of SCBs since 7239 * MK_MESSAGE SCBs are not in the per-tid lists. 7240 */ 7241 targets++; 7242 if (targets > AHD_SCB_MAX) { 7243 panic("TID LIST LOOP"); 7244 } 7245 if (scbid >= ahd->scb_data.numscbs) { 7246 printf("%s: Waiting TID List inconsistency. " 7247 "SCB index == 0x%x, yet numscbs == 0x%x.", 7248 ahd_name(ahd), scbid, ahd->scb_data.numscbs); 7249 ahd_dump_card_state(ahd); 7250 panic("for safety"); 7251 } 7252 scb = ahd_lookup_scb(ahd, scbid); 7253 if (scb == NULL) { 7254 printf("%s: SCB = 0x%x Not Active!\n", 7255 ahd_name(ahd), scbid); 7256 panic("Waiting TID List traversal\n"); 7257 break; 7258 } 7259 ahd_set_scbptr(ahd, scbid); 7260 tid_next = ahd_inw_scbram(ahd, SCB_NEXT2); 7261 if (ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD, 7262 SCB_LIST_NULL, ROLE_UNKNOWN) == 0) { 7263 tid_prev = scbid; 7264 continue; 7265 } 7266 7267 /* 7268 * We found a list of scbs that needs to be searched. 7269 */ 7270 if (action == SEARCH_PRINT) 7271 printf(" %d ( ", SCB_GET_TARGET(ahd, scb)); 7272 tid_head = scbid; 7273 found += ahd_search_scb_list(ahd, target, channel, 7274 lun, tag, role, status, 7275 action, &tid_head, 7276 SCB_GET_TARGET(ahd, scb)); 7277 if (tid_head != scbid) 7278 ahd_stitch_tid_list(ahd, tid_prev, tid_head, tid_next); 7279 if (!SCBID_IS_NULL(tid_head)) 7280 tid_prev = tid_head; 7281 if (action == SEARCH_PRINT) 7282 printf(")\n"); 7283 } 7284 ahd_set_scbptr(ahd, savedscbptr); 7285 ahd_restore_modes(ahd, saved_modes); 7286 return (found); 7287} 7288 7289static int 7290ahd_search_scb_list(struct ahd_softc *ahd, int target, char channel, 7291 int lun, u_int tag, role_t role, uint32_t status, 7292 ahd_search_action action, u_int *list_head, u_int tid) 7293{ 7294 struct scb *scb; 7295 u_int scbid; 7296 u_int next; 7297 u_int prev; 7298 int found; 7299 7300 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 7301 found = 0; 7302 prev = SCB_LIST_NULL; 7303 next = *list_head; 7304 for (scbid = next; !SCBID_IS_NULL(scbid); scbid = next) { 7305 if (scbid >= ahd->scb_data.numscbs) { 7306 printf("%s:SCB List inconsistency. " 7307 "SCB == 0x%x, yet numscbs == 0x%x.", 7308 ahd_name(ahd), scbid, ahd->scb_data.numscbs); 7309 ahd_dump_card_state(ahd); 7310 panic("for safety"); 7311 } 7312 scb = ahd_lookup_scb(ahd, scbid); 7313 if (scb == NULL) { 7314 printf("%s: SCB = %d Not Active!\n", 7315 ahd_name(ahd), scbid); 7316 panic("Waiting List traversal\n"); 7317 } 7318 ahd_set_scbptr(ahd, scbid); 7319 next = ahd_inw_scbram(ahd, SCB_NEXT); 7320 if (ahd_match_scb(ahd, scb, target, channel, 7321 lun, SCB_LIST_NULL, role) == 0) { 7322 prev = scbid; 7323 continue; 7324 } 7325 found++; 7326 switch (action) { 7327 case SEARCH_COMPLETE: 7328 { 7329 cam_status ostat; 7330 cam_status cstat; 7331 7332 ostat = ahd_get_scsi_status(scb); 7333 if (ostat == CAM_REQ_INPROG) 7334 ahd_set_scsi_status(scb, status); 7335 cstat = ahd_get_transaction_status(scb); 7336 if (cstat != CAM_REQ_CMP) 7337 ahd_freeze_scb(scb); 7338 if ((scb->flags & SCB_ACTIVE) == 0) 7339 printf("Inactive SCB in Waiting List\n"); 7340 ahd_done(ahd, scb); 7341 } 7342 /* FALLTHROUGH */ 7343 case SEARCH_REMOVE: 7344 ahd_rem_wscb(ahd, scbid, prev, next, tid); 7345 if (prev == SCB_LIST_NULL) 7346 *list_head = next; 7347 break; 7348 case SEARCH_PRINT: 7349 printf("0x%x ", scbid); 7350 /* FALLTHROUGH */ 7351 case SEARCH_COUNT: 7352 prev = scbid; 7353 break; 7354 } 7355 if (found > AHD_SCB_MAX) 7356 panic("SCB LIST LOOP"); 7357 } 7358 if (action == SEARCH_COMPLETE 7359 || action == SEARCH_REMOVE) 7360 ahd_outw(ahd, CMDS_PENDING, ahd_inw(ahd, CMDS_PENDING) - found); 7361 return (found); 7362} 7363 7364static void 7365ahd_stitch_tid_list(struct ahd_softc *ahd, u_int tid_prev, 7366 u_int tid_cur, u_int tid_next) 7367{ 7368 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 7369 7370 if (SCBID_IS_NULL(tid_cur)) { 7371 7372 /* Bypass current TID list */ 7373 if (SCBID_IS_NULL(tid_prev)) { 7374 ahd_outw(ahd, WAITING_TID_HEAD, tid_next); 7375 } else { 7376 ahd_set_scbptr(ahd, tid_prev); 7377 ahd_outw(ahd, SCB_NEXT2, tid_next); 7378 } 7379 if (SCBID_IS_NULL(tid_next)) 7380 ahd_outw(ahd, WAITING_TID_TAIL, tid_prev); 7381 } else { 7382 7383 /* Stitch through tid_cur */ 7384 if (SCBID_IS_NULL(tid_prev)) { 7385 ahd_outw(ahd, WAITING_TID_HEAD, tid_cur); 7386 } else { 7387 ahd_set_scbptr(ahd, tid_prev); 7388 ahd_outw(ahd, SCB_NEXT2, tid_cur); 7389 } 7390 ahd_set_scbptr(ahd, tid_cur); 7391 ahd_outw(ahd, SCB_NEXT2, tid_next); 7392 7393 if (SCBID_IS_NULL(tid_next)) 7394 ahd_outw(ahd, WAITING_TID_TAIL, tid_cur); 7395 } 7396} 7397 7398/* 7399 * Manipulate the waiting for selection list and return the 7400 * scb that follows the one that we remove. 7401 */ 7402static u_int 7403ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid, 7404 u_int prev, u_int next, u_int tid) 7405{ 7406 u_int tail_offset; 7407 7408 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 7409 if (!SCBID_IS_NULL(prev)) { 7410 ahd_set_scbptr(ahd, prev); 7411 ahd_outw(ahd, SCB_NEXT, next); 7412 } 7413 7414 /* 7415 * SCBs that had MK_MESSAGE set in them will not 7416 * be queued to the per-target lists, so don't 7417 * blindly clear the tail pointer. 7418 */ 7419 tail_offset = WAITING_SCB_TAILS + (2 * tid); 7420 if (SCBID_IS_NULL(next) 7421 && ahd_inw(ahd, tail_offset) == scbid) 7422 ahd_outw(ahd, tail_offset, prev); 7423 ahd_add_scb_to_free_list(ahd, scbid); 7424 return (next); 7425} 7426 7427/* 7428 * Add the SCB as selected by SCBPTR onto the on chip list of 7429 * free hardware SCBs. This list is empty/unused if we are not 7430 * performing SCB paging. 7431 */ 7432static void 7433ahd_add_scb_to_free_list(struct ahd_softc *ahd, u_int scbid) 7434{ 7435#ifdef notdef 7436/* XXX Need some other mechanism to designate "free". */ 7437 /* 7438 * Invalidate the tag so that our abort 7439 * routines don't think it's active. 7440 */ 7441 ahd_outb(ahd, SCB_TAG, SCB_LIST_NULL); 7442#endif 7443} 7444 7445/******************************** Error Handling ******************************/ 7446/* 7447 * Abort all SCBs that match the given description (target/channel/lun/tag), 7448 * setting their status to the passed in status if the status has not already 7449 * been modified from CAM_REQ_INPROG. This routine assumes that the sequencer 7450 * is paused before it is called. 7451 */ 7452int 7453ahd_abort_scbs(struct ahd_softc *ahd, int target, char channel, 7454 int lun, u_int tag, role_t role, uint32_t status) 7455{ 7456 struct scb *scbp; 7457 struct scb *scbp_next; 7458 u_int i, j; 7459 u_int maxtarget; 7460 u_int minlun; 7461 u_int maxlun; 7462 int found; 7463 ahd_mode_state saved_modes; 7464 7465 /* restore this when we're done */ 7466 saved_modes = ahd_save_modes(ahd); 7467 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7468 7469 found = ahd_search_qinfifo(ahd, target, channel, lun, SCB_LIST_NULL, 7470 role, CAM_REQUEUE_REQ, SEARCH_COMPLETE); 7471 7472 /* 7473 * Clean out the busy target table for any untagged commands. 7474 */ 7475 i = 0; 7476 maxtarget = 16; 7477 if (target != CAM_TARGET_WILDCARD) { 7478 i = target; 7479 if (channel == 'B') 7480 i += 8; 7481 maxtarget = i + 1; 7482 } 7483 7484 if (lun == CAM_LUN_WILDCARD) { 7485 minlun = 0; 7486 maxlun = AHD_NUM_LUNS_NONPKT; 7487 } else if (lun >= AHD_NUM_LUNS_NONPKT) { 7488 minlun = maxlun = 0; 7489 } else { 7490 minlun = lun; 7491 maxlun = lun + 1; 7492 } 7493 7494 if (role != ROLE_TARGET) { 7495 for (;i < maxtarget; i++) { 7496 for (j = minlun;j < maxlun; j++) { 7497 u_int scbid; 7498 u_int tcl; 7499 7500 tcl = BUILD_TCL_RAW(i, 'A', j); 7501 scbid = ahd_find_busy_tcl(ahd, tcl); 7502 scbp = ahd_lookup_scb(ahd, scbid); 7503 if (scbp == NULL 7504 || ahd_match_scb(ahd, scbp, target, channel, 7505 lun, tag, role) == 0) 7506 continue; 7507 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(i, 'A', j)); 7508 } 7509 } 7510 } 7511 7512 /* 7513 * Don't abort commands that have already completed, 7514 * but haven't quite made it up to the host yet. 7515 */ 7516 ahd_flush_qoutfifo(ahd); 7517 7518 /* 7519 * Go through the pending CCB list and look for 7520 * commands for this target that are still active. 7521 * These are other tagged commands that were 7522 * disconnected when the reset occurred. 7523 */ 7524 scbp_next = LIST_FIRST(&ahd->pending_scbs); 7525 while (scbp_next != NULL) { 7526 scbp = scbp_next; 7527 scbp_next = LIST_NEXT(scbp, pending_links); 7528 if (ahd_match_scb(ahd, scbp, target, channel, lun, tag, role)) { 7529 cam_status ostat; 7530 7531 ostat = ahd_get_scsi_status(scbp); 7532 if (ostat == CAM_REQ_INPROG) 7533 ahd_set_scsi_status(scbp, status); 7534 if (ahd_get_transaction_status(scbp) != CAM_REQ_CMP) 7535 ahd_freeze_scb(scbp); 7536 if ((scbp->flags & SCB_ACTIVE) == 0) 7537 printf("Inactive SCB on pending list\n"); 7538 ahd_done(ahd, scbp); 7539 found++; 7540 } 7541 } 7542 ahd_restore_modes(ahd, saved_modes); 7543 ahd_platform_abort_scbs(ahd, target, channel, lun, tag, role, status); 7544 ahd->flags |= AHD_UPDATE_PEND_CMDS; 7545 return found; 7546} 7547 7548static void 7549ahd_reset_current_bus(struct ahd_softc *ahd) 7550{ 7551 uint8_t scsiseq; 7552 7553 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7554 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) & ~ENSCSIRST); 7555 scsiseq = ahd_inb(ahd, SCSISEQ0) & ~(ENSELO|ENARBO|SCSIRSTO); 7556 ahd_outb(ahd, SCSISEQ0, scsiseq | SCSIRSTO); 7557 ahd_flush_device_writes(ahd); 7558 ahd_delay(AHD_BUSRESET_DELAY); 7559 /* Turn off the bus reset */ 7560 ahd_outb(ahd, SCSISEQ0, scsiseq); 7561 ahd_flush_device_writes(ahd); 7562 ahd_delay(AHD_BUSRESET_DELAY); 7563 if ((ahd->bugs & AHD_SCSIRST_BUG) != 0) { 7564 /* 7565 * 2A Razor #474 7566 * Certain chip state is not cleared for 7567 * SCSI bus resets that we initiate, so 7568 * we must reset the chip. 7569 */ 7570 ahd_reset(ahd, /*reinit*/TRUE); 7571 ahd_intr_enable(ahd, /*enable*/TRUE); 7572 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7573 } 7574 7575 ahd_clear_intstat(ahd); 7576} 7577 7578int 7579ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset) 7580{ 7581 struct ahd_devinfo devinfo; 7582 u_int initiator; 7583 u_int target; 7584 u_int max_scsiid; 7585 int found; 7586 u_int fifo; 7587 u_int next_fifo; 7588 7589 7590 ahd->pending_device = NULL; 7591 7592 ahd_compile_devinfo(&devinfo, 7593 CAM_TARGET_WILDCARD, 7594 CAM_TARGET_WILDCARD, 7595 CAM_LUN_WILDCARD, 7596 channel, ROLE_UNKNOWN); 7597 ahd_pause(ahd); 7598 7599 /* Make sure the sequencer is in a safe location. */ 7600 ahd_clear_critical_section(ahd); 7601 7602#if AHD_TARGET_MODE 7603 if ((ahd->flags & AHD_TARGETROLE) != 0) { 7604 ahd_run_tqinfifo(ahd, /*paused*/TRUE); 7605 } 7606#endif 7607 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7608 7609 /* 7610 * Disable selections so no automatic hardware 7611 * functions will modify chip state. 7612 */ 7613 ahd_outb(ahd, SCSISEQ0, 0); 7614 ahd_outb(ahd, SCSISEQ1, 0); 7615 7616 /* 7617 * Safely shut down our DMA engines. Always start with 7618 * the FIFO that is not currently active (if any are 7619 * actively connected). 7620 */ 7621 next_fifo = fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO; 7622 if (next_fifo > CURRFIFO_1) 7623 /* If disconnected, arbitrarily start with FIFO1. */ 7624 next_fifo = fifo = 0; 7625 do { 7626 next_fifo ^= CURRFIFO_1; 7627 ahd_set_modes(ahd, next_fifo, next_fifo); 7628 ahd_outb(ahd, DFCNTRL, 7629 ahd_inb(ahd, DFCNTRL) & ~(SCSIEN|HDMAEN)); 7630 while ((ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) 7631 ahd_delay(10); 7632 /* 7633 * Set CURRFIFO to the now inactive channel. 7634 */ 7635 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7636 ahd_outb(ahd, DFFSTAT, next_fifo); 7637 } while (next_fifo != fifo); 7638 7639 /* 7640 * Reset the bus if we are initiating this reset 7641 */ 7642 ahd_clear_msg_state(ahd); 7643 ahd_outb(ahd, SIMODE1, 7644 ahd_inb(ahd, SIMODE1) & ~(ENBUSFREE|ENSCSIRST|ENBUSFREE)); 7645 7646 if (initiate_reset) 7647 ahd_reset_current_bus(ahd); 7648 7649 ahd_clear_intstat(ahd); 7650 7651 /* 7652 * Clean up all the state information for the 7653 * pending transactions on this bus. 7654 */ 7655 found = ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, channel, 7656 CAM_LUN_WILDCARD, SCB_LIST_NULL, 7657 ROLE_UNKNOWN, CAM_SCSI_BUS_RESET); 7658 7659 /* 7660 * Cleanup anything left in the FIFOs. 7661 */ 7662 ahd_clear_fifo(ahd, 0); 7663 ahd_clear_fifo(ahd, 1); 7664 7665 /* 7666 * Revert to async/narrow transfers until we renegotiate. 7667 */ 7668 max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7; 7669 for (target = 0; target <= max_scsiid; target++) { 7670 7671 if (ahd->enabled_targets[target] == NULL) 7672 continue; 7673 for (initiator = 0; initiator <= max_scsiid; initiator++) { 7674 struct ahd_devinfo dinfo; 7675 7676 ahd_compile_devinfo(&dinfo, target, initiator, 7677 CAM_LUN_WILDCARD, 7678 'A', ROLE_UNKNOWN); 7679 ahd_set_width(ahd, &dinfo, MSG_EXT_WDTR_BUS_8_BIT, 7680 AHD_TRANS_CUR, /*paused*/TRUE); 7681 ahd_set_syncrate(ahd, &dinfo, /*period*/0, 7682 /*offset*/0, /*ppr_options*/0, 7683 AHD_TRANS_CUR, /*paused*/TRUE); 7684 } 7685 } 7686 7687#ifdef AHD_TARGET_MODE 7688 max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7; 7689 7690 /* 7691 * Send an immediate notify ccb to all target more peripheral 7692 * drivers affected by this action. 7693 */ 7694 for (target = 0; target <= max_scsiid; target++) { 7695 struct ahd_tmode_tstate* tstate; 7696 u_int lun; 7697 7698 tstate = ahd->enabled_targets[target]; 7699 if (tstate == NULL) 7700 continue; 7701 for (lun = 0; lun < AHD_NUM_LUNS; lun++) { 7702 struct ahd_tmode_lstate* lstate; 7703 7704 lstate = tstate->enabled_luns[lun]; 7705 if (lstate == NULL) 7706 continue; 7707 7708 ahd_queue_lstate_event(ahd, lstate, CAM_TARGET_WILDCARD, 7709 EVENT_TYPE_BUS_RESET, /*arg*/0); 7710 ahd_send_lstate_events(ahd, lstate); 7711 } 7712 } 7713#endif 7714 7715 /* Notify the XPT that a bus reset occurred */ 7716 ahd_send_async(ahd, devinfo.channel, CAM_TARGET_WILDCARD, 7717 CAM_LUN_WILDCARD, AC_BUS_RESET, NULL); 7718 ahd_restart(ahd); 7719 7720 /* 7721 * Freeze the SIMQ until our poller can determine that 7722 * the bus reset has really gone away. We set the initial 7723 * timer to 0 to have the check performed as soon as possible 7724 * from the timer context. 7725 */ 7726 if ((ahd->flags & AHD_RESET_POLL_ACTIVE) == 0) { 7727 ahd->flags |= AHD_RESET_POLL_ACTIVE; 7728 ahd_freeze_simq(ahd); 7729 ahd_timer_reset(&ahd->reset_timer, 0, ahd_reset_poll, ahd); 7730 } 7731 return (found); 7732} 7733 7734 7735#define AHD_RESET_POLL_US 1000 7736static void 7737ahd_reset_poll(void *arg) 7738{ 7739 struct ahd_softc *ahd; 7740 u_int scsiseq1; 7741 u_long l; 7742 int s; 7743 7744 ahd_list_lock(&l); 7745 ahd = arg; 7746 if (ahd == NULL) { 7747 printf("ahd_reset_poll: Instance %p no longer exists\n", arg); 7748 ahd_list_unlock(&l); 7749 return; 7750 } 7751 ahd_lock(ahd, &s); 7752 ahd_pause(ahd); 7753 ahd_update_modes(ahd); 7754 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7755 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI); 7756 if ((ahd_inb(ahd, SSTAT1) & SCSIRSTI) != 0) { 7757 ahd_timer_reset(&ahd->reset_timer, AHD_RESET_POLL_US, 7758 ahd_reset_poll, ahd); 7759 ahd_unpause(ahd); 7760 ahd_unlock(ahd, &s); 7761 ahd_list_unlock(&l); 7762 return; 7763 } 7764 7765 /* Reset is now low. Complete chip reinitialization. */ 7766 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) | ENSCSIRST); 7767 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 7768 ahd_outb(ahd, SCSISEQ1, scsiseq1 & (ENSELI|ENRSELI|ENAUTOATNP)); 7769 ahd_unpause(ahd); 7770 ahd->flags &= ~AHD_RESET_POLL_ACTIVE; 7771 ahd_unlock(ahd, &s); 7772 ahd_release_simq(ahd); 7773 ahd_list_unlock(&l); 7774} 7775 7776/**************************** Statistics Processing ***************************/ 7777static void 7778ahd_stat_timer(void *arg) 7779{ 7780 struct ahd_softc *ahd; 7781 u_long l; 7782 int s; 7783 int enint_coal; 7784 7785 ahd_list_lock(&l); 7786 ahd = arg; 7787 if (ahd == NULL) { 7788 printf("ahd_stat_timer: Instance %p no longer exists\n", arg); 7789 ahd_list_unlock(&l); 7790 return; 7791 } 7792 ahd_lock(ahd, &s); 7793 7794 enint_coal = ahd->hs_mailbox & ENINT_COALESCE; 7795 if (ahd->cmdcmplt_total > ahd->int_coalescing_threshold) 7796 enint_coal |= ENINT_COALESCE; 7797 else if (ahd->cmdcmplt_total < ahd->int_coalescing_stop_threshold) 7798 enint_coal &= ~ENINT_COALESCE; 7799 7800 if (enint_coal != (ahd->hs_mailbox & ENINT_COALESCE)) { 7801 ahd_enable_coalescing(ahd, enint_coal); 7802#ifdef AHD_DEBUG 7803 if ((ahd_debug & AHD_SHOW_INT_COALESCING) != 0) 7804 printf("%s: Interrupt coalescing " 7805 "now %sabled. Cmds %d\n", 7806 ahd_name(ahd), 7807 (enint_coal & ENINT_COALESCE) ? "en" : "dis", 7808 ahd->cmdcmplt_total); 7809#endif 7810 } 7811 7812 ahd->cmdcmplt_bucket = (ahd->cmdcmplt_bucket+1) & (AHD_STAT_BUCKETS-1); 7813 ahd->cmdcmplt_total -= ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket]; 7814 ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket] = 0; 7815 ahd_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_US, 7816 ahd_stat_timer, ahd); 7817 ahd_unlock(ahd, &s); 7818 ahd_list_unlock(&l); 7819} 7820 7821/****************************** Status Processing *****************************/ 7822void 7823ahd_handle_scb_status(struct ahd_softc *ahd, struct scb *scb) 7824{ 7825 if (scb->hscb->shared_data.istatus.scsi_status != 0) { 7826 ahd_handle_scsi_status(ahd, scb); 7827 } else { 7828 ahd_calc_residual(ahd, scb); 7829 ahd_done(ahd, scb); 7830 } 7831} 7832 7833void 7834ahd_handle_scsi_status(struct ahd_softc *ahd, struct scb *scb) 7835{ 7836 struct hardware_scb *hscb; 7837 u_int qfreeze_cnt; 7838 7839 /* 7840 * The sequencer freezes its select-out queue 7841 * anytime a SCSI status error occurs. We must 7842 * handle the error and decrement the QFREEZE count 7843 * to allow the sequencer to continue. 7844 */ 7845 hscb = scb->hscb; 7846 7847 /* Freeze the queue until the client sees the error. */ 7848 ahd_freeze_devq(ahd, scb); 7849 ahd_freeze_scb(scb); 7850 qfreeze_cnt = ahd_inw(ahd, QFREEZE_COUNT); 7851 if (qfreeze_cnt == 0) { 7852 printf("%s: Bad status with 0 qfreeze count!\n", ahd_name(ahd)); 7853 } else { 7854 qfreeze_cnt--; 7855 ahd_outw(ahd, QFREEZE_COUNT, qfreeze_cnt); 7856 } 7857 if (qfreeze_cnt == 0) 7858 ahd_outb(ahd, SEQ_FLAGS2, 7859 ahd_inb(ahd, SEQ_FLAGS2) & ~SELECTOUT_QFROZEN); 7860 7861 /* Don't want to clobber the original sense code */ 7862 if ((scb->flags & SCB_SENSE) != 0) { 7863 /* 7864 * Clear the SCB_SENSE Flag and perform 7865 * a normal command completion. 7866 */ 7867 scb->flags &= ~SCB_SENSE; 7868 ahd_set_transaction_status(scb, CAM_AUTOSENSE_FAIL); 7869 ahd_done(ahd, scb); 7870 return; 7871 } 7872 ahd_set_scsi_status(scb, hscb->shared_data.istatus.scsi_status); 7873 ahd_set_xfer_status(scb, hscb->shared_data.istatus.scsi_status); 7874 switch (hscb->shared_data.istatus.scsi_status) { 7875 case STATUS_PKT_SENSE: 7876 { 7877 struct scsi_status_iu_header *siu; 7878 7879 ahd_sync_sense(ahd, scb, BUS_DMASYNC_POSTREAD); 7880 siu = (struct scsi_status_iu_header *)scb->sense_data; 7881 ahd_set_scsi_status(scb, siu->status); 7882#ifdef AHD_DEBUG 7883 if ((ahd_debug & AHD_SHOW_SENSE) != 0) { 7884 ahd_print_path(ahd, scb); 7885 printf("SCB 0x%x Received PKT Status of 0x%x\n", 7886 SCB_GET_TAG(scb), siu->status); 7887 } 7888#endif 7889 if ((siu->flags & SIU_RSPVALID) != 0) { 7890 scsipi_printaddr(scb->xs->xs_periph); 7891 if (scsi_4btoul(siu->pkt_failures_length) < 4) { 7892 printf("Unable to parse pkt_failures\n"); 7893 } else { 7894 7895 switch (SIU_PKTFAIL_CODE(siu)) { 7896 case SIU_PFC_NONE: 7897 printf("No packet failure found\n"); 7898 break; 7899 case SIU_PFC_CIU_FIELDS_INVALID: 7900 printf("Invalid Command IU Field\n"); 7901 break; 7902 case SIU_PFC_TMF_NOT_SUPPORTED: 7903 printf("TMF not supported\n"); 7904 break; 7905 case SIU_PFC_TMF_FAILED: 7906 printf("TMF failed\n"); 7907 break; 7908 case SIU_PFC_INVALID_TYPE_CODE: 7909 printf("Invalid L_Q Type code\n"); 7910 break; 7911 case SIU_PFC_ILLEGAL_REQUEST: 7912 printf("Illegal request\n"); 7913 default: 7914 break; 7915 } 7916 } 7917 if (siu->status == SCSI_STATUS_OK) 7918 ahd_set_transaction_status(scb, 7919 CAM_REQ_CMP_ERR); 7920 } 7921 if ((siu->flags & SIU_SNSVALID) != 0) { 7922 scb->flags |= SCB_PKT_SENSE; 7923#ifdef AHD_DEBUG 7924 if ((ahd_debug & AHD_SHOW_SENSE) != 0) { 7925 printf("Sense data available (%d)\n", 7926 siu->sense_length[0]); 7927 printf("SK 0x%x ASC 0x%x ASCQ 0x%x\n", 7928 ((uint8_t)scb->sense_data[ 7929 SIU_SENSE_OFFSET(siu)+2]) & 0x0F, 7930 ((uint8_t)scb->sense_data[ 7931 SIU_SENSE_OFFSET(siu)+12]), 7932 ((uint8_t)scb->sense_data[ 7933 SIU_SENSE_OFFSET(siu)+13])); 7934 } 7935#endif 7936 } 7937 ahd_done(ahd, scb); 7938 break; 7939 } 7940 case SCSI_STATUS_CMD_TERMINATED: 7941 case SCSI_STATUS_CHECK_COND: 7942 { 7943 struct ahd_devinfo devinfo; 7944 struct ahd_dma_seg *sg; 7945 struct scsi_request_sense *sc; 7946 struct ahd_initiator_tinfo *targ_info; 7947 struct ahd_tmode_tstate *tstate; 7948#ifdef AHD_DEBUG 7949 if (ahd_debug & AHD_SHOW_SENSE) { 7950 ahd_print_path(ahd, scb); 7951 printf("SCB %d: requests Check Status\n", 7952 SCB_GET_TAG(scb)); 7953 } 7954#endif 7955 7956 if (ahd_perform_autosense(scb) == 0) 7957 break; 7958 7959 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb), 7960 SCB_GET_TARGET(ahd, scb), 7961 SCB_GET_LUN(scb), 7962 SCB_GET_CHANNEL(ahd, scb), 7963 ROLE_INITIATOR); 7964 targ_info = ahd_fetch_transinfo(ahd, 7965 devinfo.channel, 7966 devinfo.our_scsiid, 7967 devinfo.target, 7968 &tstate); 7969 sg = scb->sg_list; 7970 sc = (struct scsi_request_sense *)hscb->shared_data.idata.cdb; 7971 /* 7972 * Save off the residual if there is one. 7973 */ 7974 ahd_update_residual(ahd, scb); 7975#ifdef AHD_DEBUG 7976 if (ahd_debug & AHD_SHOW_SENSE) { 7977 ahd_print_path(ahd, scb); 7978 printf("Sending Sense\n"); 7979 } 7980#endif 7981 scb->sg_count = 0; 7982 sg = ahd_sg_setup(ahd, scb, sg, ahd_get_sense_bufaddr(ahd, scb), 7983 ahd_get_sense_bufsize(ahd, scb), 7984 /*last*/TRUE); 7985 memset(sc, 0, sizeof(*sc)); 7986 sc->opcode = SCSI_REQUEST_SENSE; 7987 sc->length = ahd_get_sense_bufsize(ahd, scb); 7988 7989 /* 7990 * We can't allow the target to disconnect. 7991 * This will be an untagged transaction and 7992 * having the target disconnect will make this 7993 * transaction indistinguishable from outstanding 7994 * tagged transactions. 7995 */ 7996 hscb->control = 0; 7997 7998 /* 7999 * This request sense could be because the 8000 * the device lost power or in some other 8001 * way has lost our transfer negotiations. 8002 * Renegotiate if appropriate. Unit attention 8003 * errors will be reported before any data 8004 * phases occur. 8005 */ 8006 if (ahd_get_residual(scb) == ahd_get_transfer_length(scb)) { 8007 ahd_update_neg_request(ahd, &devinfo, 8008 tstate, targ_info, 8009 AHD_NEG_IF_NON_ASYNC); 8010 } 8011 if (tstate->auto_negotiate & devinfo.target_mask) { 8012 hscb->control |= MK_MESSAGE; 8013 scb->flags &= 8014 ~(SCB_NEGOTIATE|SCB_ABORT|SCB_DEVICE_RESET); 8015 scb->flags |= SCB_AUTO_NEGOTIATE; 8016 } 8017 hscb->cdb_len = sizeof(*sc); 8018 ahd_setup_data_scb(ahd, scb); 8019 scb->flags |= SCB_SENSE; 8020 ahd_queue_scb(ahd, scb); 8021 /* 8022 * Ensure we have enough time to actually 8023 * retrieve the sense. 8024 */ 8025 ahd_scb_timer_reset(scb, 5 * 1000000); 8026 break; 8027 } 8028 case SCSI_STATUS_OK: 8029 printf("%s: Interrupted for status of 0? (SCB 0x%x)\n", 8030 ahd_name(ahd), SCB_GET_TAG(scb)); 8031 /* FALLTHROUGH */ 8032 default: 8033 ahd_done(ahd, scb); 8034 break; 8035 } 8036} 8037 8038/* 8039 * Calculate the residual for a just completed SCB. 8040 */ 8041void 8042ahd_calc_residual(struct ahd_softc *ahd, struct scb *scb) 8043{ 8044 struct hardware_scb *hscb; 8045 struct initiator_status *spkt; 8046 uint32_t sgptr; 8047 uint32_t resid_sgptr; 8048 uint32_t resid; 8049 8050 /* 8051 * 5 cases. 8052 * 1) No residual. 8053 * SG_STATUS_VALID clear in sgptr. 8054 * 2) Transferless command 8055 * 3) Never performed any transfers. 8056 * sgptr has SG_FULL_RESID set. 8057 * 4) No residual but target did not 8058 * save data pointers after the 8059 * last transfer, so sgptr was 8060 * never updated. 8061 * 5) We have a partial residual. 8062 * Use residual_sgptr to determine 8063 * where we are. 8064 */ 8065 8066 hscb = scb->hscb; 8067 sgptr = ahd_le32toh(hscb->sgptr); 8068 if ((sgptr & SG_STATUS_VALID) == 0) 8069 /* Case 1 */ 8070 return; 8071 sgptr &= ~SG_STATUS_VALID; 8072 8073 if ((sgptr & SG_LIST_NULL) != 0) 8074 /* Case 2 */ 8075 return; 8076 8077 /* 8078 * Residual fields are the same in both 8079 * target and initiator status packets, 8080 * so we can always use the initiator fields 8081 * regardless of the role for this SCB. 8082 */ 8083 spkt = &hscb->shared_data.istatus; 8084 resid_sgptr = ahd_le32toh(spkt->residual_sgptr); 8085 if ((sgptr & SG_FULL_RESID) != 0) { 8086 /* Case 3 */ 8087 resid = ahd_get_transfer_length(scb); 8088 } else if ((resid_sgptr & SG_LIST_NULL) != 0) { 8089 /* Case 4 */ 8090 return; 8091 } else if ((resid_sgptr & SG_OVERRUN_RESID) != 0) { 8092 ahd_print_path(ahd, scb); 8093 printf("data overrun detected Tag == 0x%x.\n", 8094 SCB_GET_TAG(scb)); 8095 ahd_freeze_devq(ahd, scb); 8096 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR); 8097 ahd_freeze_scb(scb); 8098 return; 8099 } else if ((resid_sgptr & ~SG_PTR_MASK) != 0) { 8100 panic("Bogus resid sgptr value 0x%x\n", resid_sgptr); 8101 /* NOTREACHED */ 8102 } else { 8103 struct ahd_dma_seg *sg; 8104 8105 /* 8106 * Remainder of the SG where the transfer 8107 * stopped. 8108 */ 8109 resid = ahd_le32toh(spkt->residual_datacnt) & AHD_SG_LEN_MASK; 8110 sg = ahd_sg_bus_to_virt(ahd, scb, resid_sgptr & SG_PTR_MASK); 8111 8112 /* The residual sg_ptr always points to the next sg */ 8113 sg--; 8114 8115 /* 8116 * Add up the contents of all residual 8117 * SG segments that are after the SG where 8118 * the transfer stopped. 8119 */ 8120 while ((ahd_le32toh(sg->len) & AHD_DMA_LAST_SEG) == 0) { 8121 sg++; 8122 resid += ahd_le32toh(sg->len) & AHD_SG_LEN_MASK; 8123 } 8124 } 8125 8126 if ((scb->flags & SCB_SENSE) == 0) 8127 ahd_set_residual(scb, resid); 8128 /*else 8129 ahd_set_sense_residual(scb, resid);*/ 8130 8131#ifdef AHD_DEBUG 8132 if ((ahd_debug & AHD_SHOW_MISC) != 0) { 8133 ahd_print_path(ahd, scb); 8134 printf("Handled %sResidual of %d bytes\n", 8135 (scb->flags & SCB_SENSE) ? "Sense " : "", resid); 8136 } 8137#endif 8138} 8139 8140/******************************* Target Mode **********************************/ 8141#ifdef AHD_TARGET_MODE 8142/* 8143 * Add a target mode event to this lun's queue 8144 */ 8145static void 8146ahd_queue_lstate_event(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate, 8147 u_int initiator_id, u_int event_type, u_int event_arg) 8148{ 8149 struct ahd_tmode_event *event; 8150 int pending; 8151 8152 xpt_freeze_devq(lstate->path, /*count*/1); 8153 if (lstate->event_w_idx >= lstate->event_r_idx) 8154 pending = lstate->event_w_idx - lstate->event_r_idx; 8155 else 8156 pending = AHD_TMODE_EVENT_BUFFER_SIZE + 1 8157 - (lstate->event_r_idx - lstate->event_w_idx); 8158 8159 if (event_type == EVENT_TYPE_BUS_RESET 8160 || event_type == MSG_BUS_DEV_RESET) { 8161 /* 8162 * Any earlier events are irrelevant, so reset our buffer. 8163 * This has the effect of allowing us to deal with reset 8164 * floods (an external device holding down the reset line) 8165 * without losing the event that is really interesting. 8166 */ 8167 lstate->event_r_idx = 0; 8168 lstate->event_w_idx = 0; 8169 xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE); 8170 } 8171 8172 if (pending == AHD_TMODE_EVENT_BUFFER_SIZE) { 8173 xpt_print_path(lstate->path); 8174 printf("immediate event %x:%x lost\n", 8175 lstate->event_buffer[lstate->event_r_idx].event_type, 8176 lstate->event_buffer[lstate->event_r_idx].event_arg); 8177 lstate->event_r_idx++; 8178 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8179 lstate->event_r_idx = 0; 8180 xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE); 8181 } 8182 8183 event = &lstate->event_buffer[lstate->event_w_idx]; 8184 event->initiator_id = initiator_id; 8185 event->event_type = event_type; 8186 event->event_arg = event_arg; 8187 lstate->event_w_idx++; 8188 if (lstate->event_w_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8189 lstate->event_w_idx = 0; 8190} 8191 8192/* 8193 * Send any target mode events queued up waiting 8194 * for immediate notify resources. 8195 */ 8196void 8197ahd_send_lstate_events(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate) 8198{ 8199 struct ccb_hdr *ccbh; 8200 struct ccb_immed_notify *inot; 8201 8202 while (lstate->event_r_idx != lstate->event_w_idx 8203 && (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) { 8204 struct ahd_tmode_event *event; 8205 8206 event = &lstate->event_buffer[lstate->event_r_idx]; 8207 SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle); 8208 inot = (struct ccb_immed_notify *)ccbh; 8209 switch (event->event_type) { 8210 case EVENT_TYPE_BUS_RESET: 8211 ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN; 8212 break; 8213 default: 8214 ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN; 8215 inot->message_args[0] = event->event_type; 8216 inot->message_args[1] = event->event_arg; 8217 break; 8218 } 8219 inot->initiator_id = event->initiator_id; 8220 inot->sense_len = 0; 8221 xpt_done((union ccb *)inot); 8222 lstate->event_r_idx++; 8223 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8224 lstate->event_r_idx = 0; 8225 } 8226} 8227#endif 8228 8229/******************** Sequencer Program Patching/Download *********************/ 8230 8231#ifdef AHD_DUMP_SEQ 8232void 8233ahd_dumpseq(struct ahd_softc* ahd) 8234{ 8235 int i; 8236 int max_prog; 8237 8238 max_prog = 2048; 8239 8240 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 8241 ahd_outb(ahd, PRGMCNT, 0); 8242 ahd_outb(ahd, PRGMCNT+1, 0); 8243 for (i = 0; i < max_prog; i++) { 8244 uint8_t ins_bytes[4]; 8245 8246 ahd_insb(ahd, SEQRAM, ins_bytes, 4); 8247 printf("0x%08x\n", ins_bytes[0] << 24 8248 | ins_bytes[1] << 16 8249 | ins_bytes[2] << 8 8250 | ins_bytes[3]); 8251 } 8252} 8253#endif 8254 8255static void __noinline 8256ahd_loadseq(struct ahd_softc *ahd) 8257{ 8258 struct cs cs_table[NUM_CRITICAL_SECTIONS]; 8259 u_int begin_set[NUM_CRITICAL_SECTIONS]; 8260 u_int end_set[NUM_CRITICAL_SECTIONS]; 8261 const struct patch *cur_patch; 8262 u_int cs_count; 8263 u_int cur_cs; 8264 u_int i; 8265 int downloaded; 8266 u_int skip_addr; 8267 u_int sg_prefetch_cnt; 8268 u_int sg_prefetch_cnt_limit; 8269 u_int sg_prefetch_align; 8270 u_int sg_size; 8271 uint8_t download_consts[DOWNLOAD_CONST_COUNT]; 8272 8273 if (bootverbose) 8274 printf("%s: Downloading Sequencer Program...", 8275 ahd_name(ahd)); 8276 8277#if DOWNLOAD_CONST_COUNT != 7 8278#error "Download Const Mismatch" 8279#endif 8280 /* 8281 * Start out with 0 critical sections 8282 * that apply to this firmware load. 8283 */ 8284 cs_count = 0; 8285 cur_cs = 0; 8286 memset(begin_set, 0, sizeof(begin_set)); 8287 memset(end_set, 0, sizeof(end_set)); 8288 8289 /* 8290 * Setup downloadable constant table. 8291 * 8292 * The computation for the S/G prefetch variables is 8293 * a bit complicated. We would like to always fetch 8294 * in terms of cachelined sized increments. However, 8295 * if the cacheline is not an even multiple of the 8296 * SG element size or is larger than our SG RAM, using 8297 * just the cache size might leave us with only a portion 8298 * of an SG element at the tail of a prefetch. If the 8299 * cacheline is larger than our S/G prefetch buffer less 8300 * the size of an SG element, we may round down to a cacheline 8301 * that doesn't contain any or all of the S/G of interest 8302 * within the bounds of our S/G ram. Provide variables to 8303 * the sequencer that will allow it to handle these edge 8304 * cases. 8305 */ 8306 /* Start by aligning to the nearest cacheline. */ 8307 sg_prefetch_align = ahd->pci_cachesize; 8308 if (sg_prefetch_align == 0) 8309 sg_prefetch_align = 8; 8310 /* Round down to the nearest power of 2. */ 8311 while (powerof2(sg_prefetch_align) == 0) 8312 sg_prefetch_align--; 8313 /* 8314 * If the cacheline boundary is greater than half our prefetch RAM 8315 * we risk not being able to fetch even a single complete S/G 8316 * segment if we align to that boundary. 8317 */ 8318 if (sg_prefetch_align > CCSGADDR_MAX/2) 8319 sg_prefetch_align = CCSGADDR_MAX/2; 8320 /* Start by fetching a single cacheline. */ 8321 sg_prefetch_cnt = sg_prefetch_align; 8322 /* 8323 * Increment the prefetch count by cachelines until 8324 * at least one S/G element will fit. 8325 */ 8326 sg_size = sizeof(struct ahd_dma_seg); 8327 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 8328 sg_size = sizeof(struct ahd_dma64_seg); 8329 while (sg_prefetch_cnt < sg_size) 8330 sg_prefetch_cnt += sg_prefetch_align; 8331 /* 8332 * If the cacheline is not an even multiple of 8333 * the S/G size, we may only get a partial S/G when 8334 * we align. Add a cacheline if this is the case. 8335 */ 8336 if ((sg_prefetch_align % sg_size) != 0 8337 && (sg_prefetch_cnt < CCSGADDR_MAX)) 8338 sg_prefetch_cnt += sg_prefetch_align; 8339 /* 8340 * Lastly, compute a value that the sequencer can use 8341 * to determine if the remainder of the CCSGRAM buffer 8342 * has a full S/G element in it. 8343 */ 8344 sg_prefetch_cnt_limit = -(sg_prefetch_cnt - sg_size + 1); 8345 download_consts[SG_PREFETCH_CNT] = sg_prefetch_cnt; 8346 download_consts[SG_PREFETCH_CNT_LIMIT] = sg_prefetch_cnt_limit; 8347 download_consts[SG_PREFETCH_ALIGN_MASK] = ~(sg_prefetch_align - 1); 8348 download_consts[SG_PREFETCH_ADDR_MASK] = (sg_prefetch_align - 1); 8349 download_consts[SG_SIZEOF] = sg_size; 8350 download_consts[PKT_OVERRUN_BUFOFFSET] = 8351 (ahd->overrun_buf - (uint8_t *)ahd->qoutfifo) / 256; 8352 download_consts[SCB_TRANSFER_SIZE] = SCB_TRANSFER_SIZE_1BYTE_LUN; 8353 cur_patch = patches; 8354 downloaded = 0; 8355 skip_addr = 0; 8356 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 8357 ahd_outb(ahd, PRGMCNT, 0); 8358 ahd_outb(ahd, PRGMCNT+1, 0); 8359 8360 for (i = 0; i < sizeof(seqprog)/4; i++) { 8361 if (ahd_check_patch(ahd, &cur_patch, i, &skip_addr) == 0) { 8362 /* 8363 * Don't download this instruction as it 8364 * is in a patch that was removed. 8365 */ 8366 continue; 8367 } 8368 /* 8369 * Move through the CS table until we find a CS 8370 * that might apply to this instruction. 8371 */ 8372 for (; cur_cs < num_critical_sections; cur_cs++) { 8373 if (critical_sections[cur_cs].end <= i) { 8374 if (begin_set[cs_count] == TRUE 8375 && end_set[cs_count] == FALSE) { 8376 cs_table[cs_count].end = downloaded; 8377 end_set[cs_count] = TRUE; 8378 cs_count++; 8379 } 8380 continue; 8381 } 8382 if (critical_sections[cur_cs].begin <= i 8383 && begin_set[cs_count] == FALSE) { 8384 cs_table[cs_count].begin = downloaded; 8385 begin_set[cs_count] = TRUE; 8386 } 8387 break; 8388 } 8389 ahd_download_instr(ahd, i, download_consts); 8390 downloaded++; 8391 } 8392 8393 ahd->num_critical_sections = cs_count; 8394 if (cs_count != 0) { 8395 8396 cs_count *= sizeof(struct cs); 8397 ahd->critical_sections = malloc(cs_count, M_DEVBUF, M_NOWAIT); 8398 if (ahd->critical_sections == NULL) 8399 panic("ahd_loadseq: Could not malloc"); 8400 memcpy(ahd->critical_sections, cs_table, cs_count); 8401 } 8402 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE); 8403 8404 if (bootverbose) { 8405 printf(" %d instructions downloaded\n", downloaded); 8406 printf("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n", 8407 ahd_name(ahd), ahd->features, ahd->bugs, ahd->flags); 8408 } 8409} 8410 8411static int 8412ahd_check_patch(struct ahd_softc *ahd, const struct patch **start_patch, 8413 u_int start_instr, u_int *skip_addr) 8414{ 8415 const struct patch *cur_patch; 8416 const struct patch *last_patch; 8417 u_int num_patches; 8418 8419 num_patches = sizeof(patches)/sizeof(struct patch); 8420 last_patch = &patches[num_patches]; 8421 cur_patch = *start_patch; 8422 8423 while (cur_patch < last_patch && start_instr == cur_patch->begin) { 8424 8425 if (cur_patch->patch_func(ahd) == 0) { 8426 8427 /* Start rejecting code */ 8428 *skip_addr = start_instr + cur_patch->skip_instr; 8429 cur_patch += cur_patch->skip_patch; 8430 } else { 8431 /* Accepted this patch. Advance to the next 8432 * one and wait for our instruction pointer to 8433 * hit this point. 8434 */ 8435 cur_patch++; 8436 } 8437 } 8438 8439 *start_patch = cur_patch; 8440 if (start_instr < *skip_addr) 8441 /* Still skipping */ 8442 return (0); 8443 8444 return (1); 8445} 8446 8447static u_int 8448ahd_resolve_seqaddr(struct ahd_softc *ahd, u_int address) 8449{ 8450 const struct patch *cur_patch; 8451 int address_offset; 8452 u_int skip_addr; 8453 u_int i; 8454 8455 address_offset = 0; 8456 cur_patch = patches; 8457 skip_addr = 0; 8458 8459 for (i = 0; i < address;) { 8460 8461 ahd_check_patch(ahd, &cur_patch, i, &skip_addr); 8462 8463 if (skip_addr > i) { 8464 int end_addr; 8465 8466 end_addr = MIN(address, skip_addr); 8467 address_offset += end_addr - i; 8468 i = skip_addr; 8469 } else { 8470 i++; 8471 } 8472 } 8473 return (address - address_offset); 8474} 8475 8476static void 8477ahd_download_instr(struct ahd_softc *ahd, u_int instrptr, uint8_t *dconsts) 8478{ 8479 union ins_formats instr; 8480 struct ins_format1 *fmt1_ins; 8481 struct ins_format3 *fmt3_ins; 8482 u_int opcode; 8483 8484 /* 8485 * The firmware is always compiled into a little endian format. 8486 */ 8487 instr.integer = ahd_le32toh(*(const uint32_t*)&seqprog[instrptr * 4]); 8488 8489 fmt1_ins = &instr.format1; 8490 fmt3_ins = NULL; 8491 8492 /* Pull the opcode */ 8493 opcode = instr.format1.opcode; 8494 switch (opcode) { 8495 case AIC_OP_JMP: 8496 case AIC_OP_JC: 8497 case AIC_OP_JNC: 8498 case AIC_OP_CALL: 8499 case AIC_OP_JNE: 8500 case AIC_OP_JNZ: 8501 case AIC_OP_JE: 8502 case AIC_OP_JZ: 8503 { 8504 fmt3_ins = &instr.format3; 8505 fmt3_ins->address = ahd_resolve_seqaddr(ahd, fmt3_ins->address); 8506 } 8507 /* FALLTHROUGH */ 8508 case AIC_OP_OR: 8509 case AIC_OP_AND: 8510 case AIC_OP_XOR: 8511 case AIC_OP_ADD: 8512 case AIC_OP_ADC: 8513 case AIC_OP_BMOV: 8514 if (fmt1_ins->parity != 0) { 8515 fmt1_ins->immediate = dconsts[fmt1_ins->immediate]; 8516 } 8517 fmt1_ins->parity = 0; 8518 /* FALLTHROUGH */ 8519 case AIC_OP_ROL: 8520 { 8521 int i, count; 8522 8523 /* Calculate odd parity for the instruction */ 8524 for (i = 0, count = 0; i < 31; i++) { 8525 uint32_t mask; 8526 8527 mask = 0x01 << i; 8528 if ((instr.integer & mask) != 0) 8529 count++; 8530 } 8531 if ((count & 0x01) == 0) 8532 instr.format1.parity = 1; 8533 8534 /* The sequencer is a little endian CPU */ 8535 instr.integer = ahd_htole32(instr.integer); 8536 ahd_outsb(ahd, SEQRAM, instr.bytes, 4); 8537 break; 8538 } 8539 default: 8540 panic("Unknown opcode encountered in seq program"); 8541 break; 8542 } 8543} 8544 8545static int 8546ahd_probe_stack_size(struct ahd_softc *ahd) 8547{ 8548 int last_probe; 8549 8550 last_probe = 0; 8551 while (1) { 8552 int i; 8553 8554 /* 8555 * We avoid using 0 as a pattern to avoid 8556 * confusion if the stack implementation 8557 * "back-fills" with zeros when "poping' 8558 * entries. 8559 */ 8560 for (i = 1; i <= last_probe+1; i++) { 8561 ahd_outb(ahd, STACK, i & 0xFF); 8562 ahd_outb(ahd, STACK, (i >> 8) & 0xFF); 8563 } 8564 8565 /* Verify */ 8566 for (i = last_probe+1; i > 0; i--) { 8567 u_int stack_entry; 8568 8569 stack_entry = ahd_inb(ahd, STACK) 8570 |(ahd_inb(ahd, STACK) << 8); 8571 if (stack_entry != i) 8572 goto sized; 8573 } 8574 last_probe++; 8575 } 8576sized: 8577 return (last_probe); 8578} 8579 8580void 8581ahd_dump_all_cards_state(void) 8582{ 8583 struct ahd_softc *list_ahd; 8584 8585 TAILQ_FOREACH(list_ahd, &ahd_tailq, links) { 8586 ahd_dump_card_state(list_ahd); 8587 } 8588} 8589 8590int 8591ahd_print_register(ahd_reg_parse_entry_t *table, u_int num_entries, 8592 const char *name, u_int address, u_int value, 8593 u_int *cur_column, u_int wrap_point) 8594{ 8595 size_t printed; 8596 u_int printed_mask; 8597 char line[1024]; 8598 8599 line[0] = 0; 8600 8601 if (cur_column != NULL && *cur_column >= wrap_point) { 8602 printf("\n"); 8603 *cur_column = 0; 8604 } 8605 printed = snprintf(line, sizeof(line), "%s[0x%x]", name, value); 8606 printed = sizeof(line); 8607 if (table == NULL) { 8608 if (printed < sizeof(line)) 8609 printed += snprintf(&line[printed], 8610 (sizeof line) - printed, " "); 8611 printf("%s", line); 8612 if (cur_column != NULL) 8613 *cur_column += printed; 8614 return (printed); 8615 } 8616 printed_mask = 0; 8617 while (printed_mask != 0xFF) { 8618 int entry; 8619 8620 for (entry = 0; entry < num_entries; entry++) { 8621 if (((value & table[entry].mask) 8622 != table[entry].value) 8623 || ((printed_mask & table[entry].mask) 8624 == table[entry].mask)) 8625 continue; 8626 if (printed < sizeof(line)) 8627 printed += snprintf(&line[printed], 8628 (sizeof line) - printed, "%s%s", 8629 printed_mask == 0 ? ":(" : "|", 8630 table[entry].name); 8631 printed_mask |= table[entry].mask; 8632 8633 break; 8634 } 8635 if (entry >= num_entries) 8636 break; 8637 } 8638 if (printed < sizeof(line)) { 8639 if (printed_mask != 0) 8640 printed += snprintf(&line[printed], 8641 (sizeof line) - printed, ") "); 8642 else 8643 printed += snprintf(&line[printed], 8644 (sizeof line) - printed, " "); 8645 } 8646 if (cur_column != NULL) 8647 *cur_column += printed; 8648 printf("%s", line); 8649 8650 return (printed); 8651} 8652 8653void 8654ahd_dump_card_state(struct ahd_softc *ahd) 8655{ 8656 struct scb *scb; 8657 ahd_mode_state saved_modes; 8658 u_int dffstat; 8659 int paused; 8660 u_int scb_index; 8661 u_int saved_scb_index; 8662 u_int cur_col; 8663 int i; 8664 8665 if (ahd_is_paused(ahd)) { 8666 paused = 1; 8667 } else { 8668 paused = 0; 8669 ahd_pause(ahd); 8670 } 8671 saved_modes = ahd_save_modes(ahd); 8672 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 8673 printf(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n" 8674 "%s: Dumping Card State at program address 0x%x Mode 0x%x\n", 8675 ahd_name(ahd), 8676 ahd_inb(ahd, CURADDR) | (ahd_inb(ahd, CURADDR+1) << 8), 8677 ahd_build_mode_state(ahd, ahd->saved_src_mode, 8678 ahd->saved_dst_mode)); 8679 if (paused) 8680 printf("Card was paused\n"); 8681 8682 if (ahd_check_cmdcmpltqueues(ahd)) 8683 printf("Completions are pending\n"); 8684 /* 8685 * Mode independent registers. 8686 */ 8687 cur_col = 0; 8688 ahd_hs_mailbox_print(ahd_inb(ahd, LOCAL_HS_MAILBOX), &cur_col, 50); 8689 ahd_intctl_print(ahd_inb(ahd, INTCTL), &cur_col, 50); 8690 ahd_seqintstat_print(ahd_inb(ahd, SEQINTSTAT), &cur_col, 50); 8691 ahd_saved_mode_print(ahd_inb(ahd, SAVED_MODE), &cur_col, 50); 8692 ahd_dffstat_print(ahd_inb(ahd, DFFSTAT), &cur_col, 50); 8693 ahd_scsisigi_print(ahd_inb(ahd, SCSISIGI), &cur_col, 50); 8694 ahd_scsiphase_print(ahd_inb(ahd, SCSIPHASE), &cur_col, 50); 8695 ahd_scsibus_print(ahd_inb(ahd, SCSIBUS), &cur_col, 50); 8696 ahd_lastphase_print(ahd_inb(ahd, LASTPHASE), &cur_col, 50); 8697 ahd_scsiseq0_print(ahd_inb(ahd, SCSISEQ0), &cur_col, 50); 8698 ahd_scsiseq1_print(ahd_inb(ahd, SCSISEQ1), &cur_col, 50); 8699 ahd_seqctl0_print(ahd_inb(ahd, SEQCTL0), &cur_col, 50); 8700 ahd_seqintctl_print(ahd_inb(ahd, SEQINTCTL), &cur_col, 50); 8701 ahd_seq_flags_print(ahd_inb(ahd, SEQ_FLAGS), &cur_col, 50); 8702 ahd_seq_flags2_print(ahd_inb(ahd, SEQ_FLAGS2), &cur_col, 50); 8703 ahd_sstat0_print(ahd_inb(ahd, SSTAT0), &cur_col, 50); 8704 ahd_sstat1_print(ahd_inb(ahd, SSTAT1), &cur_col, 50); 8705 ahd_sstat2_print(ahd_inb(ahd, SSTAT2), &cur_col, 50); 8706 ahd_sstat3_print(ahd_inb(ahd, SSTAT3), &cur_col, 50); 8707 ahd_perrdiag_print(ahd_inb(ahd, PERRDIAG), &cur_col, 50); 8708 ahd_simode1_print(ahd_inb(ahd, SIMODE1), &cur_col, 50); 8709 ahd_lqistat0_print(ahd_inb(ahd, LQISTAT0), &cur_col, 50); 8710 ahd_lqistat1_print(ahd_inb(ahd, LQISTAT1), &cur_col, 50); 8711 ahd_lqistat2_print(ahd_inb(ahd, LQISTAT2), &cur_col, 50); 8712 ahd_lqostat0_print(ahd_inb(ahd, LQOSTAT0), &cur_col, 50); 8713 ahd_lqostat1_print(ahd_inb(ahd, LQOSTAT1), &cur_col, 50); 8714 ahd_lqostat2_print(ahd_inb(ahd, LQOSTAT2), &cur_col, 50); 8715 printf("\n"); 8716 printf("\nSCB Count = %d CMDS_PENDING = %d LASTSCB 0x%x " 8717 "CURRSCB 0x%x NEXTSCB 0x%x\n", 8718 ahd->scb_data.numscbs, ahd_inw(ahd, CMDS_PENDING), 8719 ahd_inw(ahd, LASTSCB), ahd_inw(ahd, CURRSCB), 8720 ahd_inw(ahd, NEXTSCB)); 8721 cur_col = 0; 8722 /* QINFIFO */ 8723 ahd_search_qinfifo(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS, 8724 CAM_LUN_WILDCARD, SCB_LIST_NULL, 8725 ROLE_UNKNOWN, /*status*/0, SEARCH_PRINT); 8726 saved_scb_index = ahd_get_scbptr(ahd); 8727 printf("Pending list:"); 8728 i = 0; 8729 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 8730 if (i++ > AHD_SCB_MAX) 8731 break; 8732 /*cur_col =*/ printf("\n%3d FIFO_USE[0x%x] ", SCB_GET_TAG(scb), 8733 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT)); 8734 ahd_set_scbptr(ahd, SCB_GET_TAG(scb)); 8735 ahd_scb_control_print(ahd_inb_scbram(ahd, SCB_CONTROL), 8736 &cur_col, 60); 8737 ahd_scb_scsiid_print(ahd_inb_scbram(ahd, SCB_SCSIID), 8738 &cur_col, 60); 8739 } 8740 printf("\nTotal %d\n", i); 8741 8742 printf("Kernel Free SCB list: "); 8743 i = 0; 8744 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 8745 struct scb *list_scb; 8746 8747 list_scb = scb; 8748 do { 8749 printf("%d ", SCB_GET_TAG(list_scb)); 8750 list_scb = LIST_NEXT(list_scb, collision_links); 8751 } while (list_scb && i++ < AHD_SCB_MAX); 8752 } 8753 8754 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) { 8755 if (i++ > AHD_SCB_MAX) 8756 break; 8757 printf("%d ", SCB_GET_TAG(scb)); 8758 } 8759 printf("\n"); 8760 8761 printf("Sequencer Complete DMA-inprog list: "); 8762 scb_index = ahd_inw(ahd, COMPLETE_SCB_DMAINPROG_HEAD); 8763 i = 0; 8764 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 8765 ahd_set_scbptr(ahd, scb_index); 8766 printf("%d ", scb_index); 8767 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 8768 } 8769 printf("\n"); 8770 8771 printf("Sequencer Complete list: "); 8772 scb_index = ahd_inw(ahd, COMPLETE_SCB_HEAD); 8773 i = 0; 8774 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 8775 ahd_set_scbptr(ahd, scb_index); 8776 printf("%d ", scb_index); 8777 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 8778 } 8779 printf("\n"); 8780 8781 8782 printf("Sequencer DMA-Up and Complete list: "); 8783 scb_index = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 8784 i = 0; 8785 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 8786 ahd_set_scbptr(ahd, scb_index); 8787 printf("%d ", scb_index); 8788 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 8789 } 8790 printf("\n"); 8791 ahd_set_scbptr(ahd, saved_scb_index); 8792 dffstat = ahd_inb(ahd, DFFSTAT); 8793 for (i = 0; i < 2; i++) { 8794#ifdef AHD_DEBUG 8795 struct scb *fifo_scb; 8796#endif 8797 u_int fifo_scbptr; 8798 8799 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i); 8800 fifo_scbptr = ahd_get_scbptr(ahd); 8801 printf("\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n", 8802 ahd_name(ahd), i, 8803 (dffstat & (FIFO0FREE << i)) ? "Free" : "Active", 8804 ahd_inw(ahd, LONGJMP_ADDR), fifo_scbptr); 8805 cur_col = 0; 8806 ahd_seqimode_print(ahd_inb(ahd, SEQIMODE), &cur_col, 50); 8807 ahd_seqintsrc_print(ahd_inb(ahd, SEQINTSRC), &cur_col, 50); 8808 ahd_dfcntrl_print(ahd_inb(ahd, DFCNTRL), &cur_col, 50); 8809 ahd_dfstatus_print(ahd_inb(ahd, DFSTATUS), &cur_col, 50); 8810 ahd_sg_cache_shadow_print(ahd_inb(ahd, SG_CACHE_SHADOW), 8811 &cur_col, 50); 8812 ahd_sg_state_print(ahd_inb(ahd, SG_STATE), &cur_col, 50); 8813 ahd_dffsxfrctl_print(ahd_inb(ahd, DFFSXFRCTL), &cur_col, 50); 8814 ahd_soffcnt_print(ahd_inb(ahd, SOFFCNT), &cur_col, 50); 8815 ahd_mdffstat_print(ahd_inb(ahd, MDFFSTAT), &cur_col, 50); 8816 if (cur_col > 50) { 8817 printf("\n"); 8818 cur_col = 0; 8819 } 8820 printf("\nSHADDR = 0x%x%x, SHCNT = 0x%x ", 8821 ahd_inl(ahd, SHADDR+4), 8822 ahd_inl(ahd, SHADDR), 8823 (ahd_inb(ahd, SHCNT) 8824 | (ahd_inb(ahd, SHCNT + 1) << 8) 8825 | (ahd_inb(ahd, SHCNT + 2) << 16))); 8826 printf("HADDR = 0x%x%x, HCNT = 0x%x \n", 8827 ahd_inl(ahd, HADDR+4), 8828 ahd_inl(ahd, HADDR), 8829 (ahd_inb(ahd, HCNT) 8830 | (ahd_inb(ahd, HCNT + 1) << 8) 8831 | (ahd_inb(ahd, HCNT + 2) << 16))); 8832 ahd_ccsgctl_print(ahd_inb(ahd, CCSGCTL), &cur_col, 50); 8833#ifdef AHD_DEBUG 8834 if ((ahd_debug & AHD_SHOW_SG) != 0) { 8835 fifo_scb = ahd_lookup_scb(ahd, fifo_scbptr); 8836 if (fifo_scb != NULL) 8837 ahd_dump_sglist(fifo_scb); 8838 } 8839#endif 8840 } 8841 printf("\nLQIN: "); 8842 for (i = 0; i < 20; i++) 8843 printf("0x%x ", ahd_inb(ahd, LQIN + i)); 8844 printf("\n"); 8845 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 8846 printf("%s: LQISTATE = 0x%x, LQOSTATE = 0x%x, OPTIONMODE = 0x%x\n", 8847 ahd_name(ahd), ahd_inb(ahd, LQISTATE), ahd_inb(ahd, LQOSTATE), 8848 ahd_inb(ahd, OPTIONMODE)); 8849 printf("%s: OS_SPACE_CNT = 0x%x MAXCMDCNT = 0x%x\n", 8850 ahd_name(ahd), ahd_inb(ahd, OS_SPACE_CNT), 8851 ahd_inb(ahd, MAXCMDCNT)); 8852 ahd_simode0_print(ahd_inb(ahd, SIMODE0), &cur_col, 50); 8853 printf("\n"); 8854 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 8855 cur_col = 0; 8856 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode); 8857 printf("%s: REG0 == 0x%x, SINDEX = 0x%x, DINDEX = 0x%x\n", 8858 ahd_name(ahd), ahd_inw(ahd, REG0), ahd_inw(ahd, SINDEX), 8859 ahd_inw(ahd, DINDEX)); 8860 printf("%s: SCBPTR == 0x%x, SCB_NEXT == 0x%x, SCB_NEXT2 == 0x%x\n", 8861 ahd_name(ahd), ahd_get_scbptr(ahd), 8862 ahd_inw_scbram(ahd, SCB_NEXT), 8863 ahd_inw_scbram(ahd, SCB_NEXT2)); 8864 printf("CDB %x %x %x %x %x %x\n", 8865 ahd_inb_scbram(ahd, SCB_CDB_STORE), 8866 ahd_inb_scbram(ahd, SCB_CDB_STORE+1), 8867 ahd_inb_scbram(ahd, SCB_CDB_STORE+2), 8868 ahd_inb_scbram(ahd, SCB_CDB_STORE+3), 8869 ahd_inb_scbram(ahd, SCB_CDB_STORE+4), 8870 ahd_inb_scbram(ahd, SCB_CDB_STORE+5)); 8871 printf("STACK:"); 8872 for (i = 0; i < ahd->stack_size; i++) { 8873 ahd->saved_stack[i] = 8874 ahd_inb(ahd, STACK)|(ahd_inb(ahd, STACK) << 8); 8875 printf(" 0x%x", ahd->saved_stack[i]); 8876 } 8877 for (i = ahd->stack_size-1; i >= 0; i--) { 8878 ahd_outb(ahd, STACK, ahd->saved_stack[i] & 0xFF); 8879 ahd_outb(ahd, STACK, (ahd->saved_stack[i] >> 8) & 0xFF); 8880 } 8881 printf("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n"); 8882 ahd_platform_dump_card_state(ahd); 8883 ahd_restore_modes(ahd, saved_modes); 8884 if (paused == 0) 8885 ahd_unpause(ahd); 8886} 8887 8888void 8889ahd_dump_scbs(struct ahd_softc *ahd) 8890{ 8891 ahd_mode_state saved_modes; 8892 u_int saved_scb_index; 8893 int i; 8894 8895 saved_modes = ahd_save_modes(ahd); 8896 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 8897 saved_scb_index = ahd_get_scbptr(ahd); 8898 for (i = 0; i < AHD_SCB_MAX; i++) { 8899 ahd_set_scbptr(ahd, i); 8900 printf("%3d", i); 8901 printf("(CTRL 0x%x ID 0x%x N 0x%x N2 0x%x SG 0x%x, RSG 0x%x)\n", 8902 ahd_inb_scbram(ahd, SCB_CONTROL), 8903 ahd_inb_scbram(ahd, SCB_SCSIID), 8904 ahd_inw_scbram(ahd, SCB_NEXT), 8905 ahd_inw_scbram(ahd, SCB_NEXT2), 8906 ahd_inl_scbram(ahd, SCB_SGPTR), 8907 ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR)); 8908 } 8909 printf("\n"); 8910 ahd_set_scbptr(ahd, saved_scb_index); 8911 ahd_restore_modes(ahd, saved_modes); 8912} 8913 8914/**************************** Flexport Logic **********************************/ 8915/* 8916 * Read count 16bit words from 16bit word address start_addr from the 8917 * SEEPROM attached to the controller, into tbuf, using the controller's 8918 * SEEPROM reading state machine. Optionally treat the data as a byte 8919 * stream in terms of byte order. 8920 */ 8921int 8922ahd_read_seeprom(struct ahd_softc *ahd, uint16_t *tbuf, 8923 u_int start_addr, u_int count, int bytestream) 8924{ 8925 u_int cur_addr; 8926 u_int end_addr; 8927 int error; 8928 8929 /* 8930 * If we never make it through the loop even once, 8931 * we were passed invalid arguments. 8932 */ 8933 error = EINVAL; 8934 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 8935 end_addr = start_addr + count; 8936 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) { 8937 8938 ahd_outb(ahd, SEEADR, cur_addr); 8939 ahd_outb(ahd, SEECTL, SEEOP_READ | SEESTART); 8940 8941 error = ahd_wait_seeprom(ahd); 8942 if (error) { 8943 printf("%s: ahd_wait_seeprom timed out\n", 8944 ahd_name(ahd)); 8945 break; 8946 } 8947 if (bytestream != 0) { 8948 uint8_t *bytestream_ptr; 8949 8950 bytestream_ptr = (uint8_t *)tbuf; 8951 *bytestream_ptr++ = ahd_inb(ahd, SEEDAT); 8952 *bytestream_ptr = ahd_inb(ahd, SEEDAT+1); 8953 } else { 8954 /* 8955 * ahd_inw() already handles machine byte order. 8956 */ 8957 *tbuf = ahd_inw(ahd, SEEDAT); 8958 } 8959 tbuf++; 8960 } 8961 return (error); 8962} 8963 8964/* 8965 * Write count 16bit words from tbuf, into SEEPROM attached to the 8966 * controller starting at 16bit word address start_addr, using the 8967 * controller's SEEPROM writing state machine. 8968 */ 8969int 8970ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *tbuf, 8971 u_int start_addr, u_int count) 8972{ 8973 u_int cur_addr; 8974 u_int end_addr; 8975 int error; 8976 int retval; 8977 8978 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 8979 error = ENOENT; 8980 8981 /* Place the chip into write-enable mode */ 8982 ahd_outb(ahd, SEEADR, SEEOP_EWEN_ADDR); 8983 ahd_outb(ahd, SEECTL, SEEOP_EWEN | SEESTART); 8984 error = ahd_wait_seeprom(ahd); 8985 if (error) 8986 return (error); 8987 8988 /* 8989 * Write the data. If we don't get through the loop at 8990 * least once, the arguments were invalid. 8991 */ 8992 retval = EINVAL; 8993 end_addr = start_addr + count; 8994 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) { 8995 ahd_outw(ahd, SEEDAT, *tbuf++); 8996 ahd_outb(ahd, SEEADR, cur_addr); 8997 ahd_outb(ahd, SEECTL, SEEOP_WRITE | SEESTART); 8998 8999 retval = ahd_wait_seeprom(ahd); 9000 if (retval) 9001 break; 9002 } 9003 9004 /* 9005 * Disable writes. 9006 */ 9007 ahd_outb(ahd, SEEADR, SEEOP_EWDS_ADDR); 9008 ahd_outb(ahd, SEECTL, SEEOP_EWDS | SEESTART); 9009 error = ahd_wait_seeprom(ahd); 9010 if (error) 9011 return (error); 9012 return (retval); 9013} 9014 9015/* 9016 * Wait ~100us for the serial eeprom to satisfy our request. 9017 */ 9018int 9019ahd_wait_seeprom(struct ahd_softc *ahd) 9020{ 9021 int cnt; 9022 9023 cnt = 2000; 9024 while ((ahd_inb(ahd, SEESTAT) & (SEEARBACK|SEEBUSY)) != 0 && --cnt) 9025 ahd_delay(5); 9026 9027 if (cnt == 0) 9028 return (ETIMEDOUT); 9029 return (0); 9030} 9031 9032/* 9033 * Validate the two checksums in the per_channel 9034 * vital product data struct. 9035 */ 9036int 9037ahd_verify_vpd_cksum(struct vpd_config *vpd) 9038{ 9039 int i; 9040 int maxaddr; 9041 uint32_t checksum; 9042 uint8_t *vpdarray; 9043 9044 vpdarray = (uint8_t *)vpd; 9045 maxaddr = offsetof(struct vpd_config, vpd_checksum); 9046 checksum = 0; 9047 for (i = offsetof(struct vpd_config, resource_type); i < maxaddr; i++) 9048 checksum = checksum + vpdarray[i]; 9049 if (checksum == 0 9050 || (-checksum & 0xFF) != vpd->vpd_checksum) 9051 return (0); 9052 9053 checksum = 0; 9054 maxaddr = offsetof(struct vpd_config, checksum); 9055 for (i = offsetof(struct vpd_config, default_target_flags); 9056 i < maxaddr; i++) 9057 checksum = checksum + vpdarray[i]; 9058 if (checksum == 0 9059 || (-checksum & 0xFF) != vpd->checksum) 9060 return (0); 9061 return (1); 9062} 9063 9064int 9065ahd_verify_cksum(struct seeprom_config *sc) 9066{ 9067 int i; 9068 int maxaddr; 9069 uint32_t checksum; 9070 uint16_t *scarray; 9071 9072 maxaddr = (sizeof(*sc)/2) - 1; 9073 checksum = 0; 9074 scarray = (uint16_t *)sc; 9075 9076 for (i = 0; i < maxaddr; i++) 9077 checksum = checksum + scarray[i]; 9078 if (checksum == 0 9079 || (checksum & 0xFFFF) != sc->checksum) { 9080 return (0); 9081 } else { 9082 return (1); 9083 } 9084} 9085 9086int 9087ahd_acquire_seeprom(struct ahd_softc *ahd) 9088{ 9089 /* 9090 * We should be able to determine the SEEPROM type 9091 * from the flexport logic, but unfortunately not 9092 * all implementations have this logic and there is 9093 * no programmatic method for determining if the logic 9094 * is present. 9095 */ 9096 9097 return (1); 9098#if 0 9099 uint8_t seetype; 9100 int error; 9101 9102 error = ahd_read_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, &seetype); 9103 if (error != 0 9104 || ((seetype & FLX_ROMSTAT_SEECFG) == FLX_ROMSTAT_SEE_NONE)) 9105 return (0); 9106 return (1); 9107#endif 9108} 9109 9110void 9111ahd_release_seeprom(struct ahd_softc *ahd) 9112{ 9113 /* Currently a no-op */ 9114} 9115 9116int 9117ahd_write_flexport(struct ahd_softc *ahd, u_int addr, u_int value) 9118{ 9119 int error; 9120 9121 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9122 if (addr > 7) 9123 panic("ahd_write_flexport: address out of range"); 9124 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3)); 9125 error = ahd_wait_flexport(ahd); 9126 if (error != 0) 9127 return (error); 9128 ahd_outb(ahd, BRDDAT, value); 9129 ahd_flush_device_writes(ahd); 9130 ahd_outb(ahd, BRDCTL, BRDSTB|BRDEN|(addr << 3)); 9131 ahd_flush_device_writes(ahd); 9132 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3)); 9133 ahd_flush_device_writes(ahd); 9134 ahd_outb(ahd, BRDCTL, 0); 9135 ahd_flush_device_writes(ahd); 9136 return (0); 9137} 9138 9139int 9140ahd_read_flexport(struct ahd_softc *ahd, u_int addr, uint8_t *value) 9141{ 9142 int error; 9143 9144 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9145 if (addr > 7) 9146 panic("ahd_read_flexport: address out of range"); 9147 ahd_outb(ahd, BRDCTL, BRDRW|BRDEN|(addr << 3)); 9148 error = ahd_wait_flexport(ahd); 9149 if (error != 0) 9150 return (error); 9151 *value = ahd_inb(ahd, BRDDAT); 9152 ahd_outb(ahd, BRDCTL, 0); 9153 ahd_flush_device_writes(ahd); 9154 return (0); 9155} 9156 9157/* 9158 * Wait at most 2 seconds for flexport arbitration to succeed. 9159 */ 9160int 9161ahd_wait_flexport(struct ahd_softc *ahd) 9162{ 9163 int cnt; 9164 9165 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9166 cnt = 1000000 * 2 / 5; 9167 while ((ahd_inb(ahd, BRDCTL) & FLXARBACK) == 0 && --cnt) 9168 ahd_delay(5); 9169 9170 if (cnt == 0) 9171 return (ETIMEDOUT); 9172 return (0); 9173} 9174 9175/************************* Target Mode ****************************************/ 9176#ifdef AHD_TARGET_MODE 9177cam_status 9178ahd_find_tmode_devs(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb, 9179 struct ahd_tmode_tstate **tstate, 9180 struct ahd_tmode_lstate **lstate, 9181 int notfound_failure) 9182{ 9183 9184 if ((ahd->features & AHD_TARGETMODE) == 0) 9185 return (CAM_REQ_INVALID); 9186 9187 /* 9188 * Handle the 'black hole' device that sucks up 9189 * requests to unattached luns on enabled targets. 9190 */ 9191 if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD 9192 && ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) { 9193 *tstate = NULL; 9194 *lstate = ahd->black_hole; 9195 } else { 9196 u_int max_id; 9197 9198 max_id = (ahd->features & AHD_WIDE) ? 15 : 7; 9199 if (ccb->ccb_h.target_id > max_id) 9200 return (CAM_TID_INVALID); 9201 9202 if (ccb->ccb_h.target_lun >= AHD_NUM_LUNS) 9203 return (CAM_LUN_INVALID); 9204 9205 *tstate = ahd->enabled_targets[ccb->ccb_h.target_id]; 9206 *lstate = NULL; 9207 if (*tstate != NULL) 9208 *lstate = 9209 (*tstate)->enabled_luns[ccb->ccb_h.target_lun]; 9210 } 9211 9212 if (notfound_failure != 0 && *lstate == NULL) 9213 return (CAM_PATH_INVALID); 9214 9215 return (CAM_REQ_CMP); 9216} 9217 9218void 9219ahd_handle_en_lun(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb) 9220{ 9221#if NOT_YET 9222 struct ahd_tmode_tstate *tstate; 9223 struct ahd_tmode_lstate *lstate; 9224 struct ccb_en_lun *cel; 9225 cam_status status; 9226 u_int target; 9227 u_int lun; 9228 u_int target_mask; 9229 u_long s; 9230 char channel; 9231 9232 status = ahd_find_tmode_devs(ahd, sim, ccb, &tstate, &lstate, 9233 /*notfound_failure*/FALSE); 9234 9235 if (status != CAM_REQ_CMP) { 9236 ccb->ccb_h.status = status; 9237 return; 9238 } 9239 9240 if ((ahd->features & AHD_MULTIROLE) != 0) { 9241 u_int our_id; 9242 9243 our_id = ahd->our_id; 9244 if (ccb->ccb_h.target_id != our_id) { 9245 if ((ahd->features & AHD_MULTI_TID) != 0 9246 && (ahd->flags & AHD_INITIATORROLE) != 0) { 9247 /* 9248 * Only allow additional targets if 9249 * the initiator role is disabled. 9250 * The hardware cannot handle a re-select-in 9251 * on the initiator id during a re-select-out 9252 * on a different target id. 9253 */ 9254 status = CAM_TID_INVALID; 9255 } else if ((ahd->flags & AHD_INITIATORROLE) != 0 9256 || ahd->enabled_luns > 0) { 9257 /* 9258 * Only allow our target id to change 9259 * if the initiator role is not configured 9260 * and there are no enabled luns which 9261 * are attached to the currently registered 9262 * scsi id. 9263 */ 9264 status = CAM_TID_INVALID; 9265 } 9266 } 9267 } 9268 9269 if (status != CAM_REQ_CMP) { 9270 ccb->ccb_h.status = status; 9271 return; 9272 } 9273 9274 /* 9275 * We now have an id that is valid. 9276 * If we aren't in target mode, switch modes. 9277 */ 9278 if ((ahd->flags & AHD_TARGETROLE) == 0 9279 && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) { 9280 u_long s; 9281 9282 printf("Configuring Target Mode\n"); 9283 ahd_lock(ahd, &s); 9284 if (LIST_FIRST(&ahd->pending_scbs) != NULL) { 9285 ccb->ccb_h.status = CAM_BUSY; 9286 ahd_unlock(ahd, &s); 9287 return; 9288 } 9289 ahd->flags |= AHD_TARGETROLE; 9290 if ((ahd->features & AHD_MULTIROLE) == 0) 9291 ahd->flags &= ~AHD_INITIATORROLE; 9292 ahd_pause(ahd); 9293 ahd_loadseq(ahd); 9294 ahd_restart(ahd); 9295 ahd_unlock(ahd, &s); 9296 } 9297 cel = &ccb->cel; 9298 target = ccb->ccb_h.target_id; 9299 lun = ccb->ccb_h.target_lun; 9300 channel = SIM_CHANNEL(ahd, sim); 9301 target_mask = 0x01 << target; 9302 if (channel == 'B') 9303 target_mask <<= 8; 9304 9305 if (cel->enable != 0) { 9306 u_int scsiseq1; 9307 9308 /* Are we already enabled?? */ 9309 if (lstate != NULL) { 9310 xpt_print_path(ccb->ccb_h.path); 9311 printf("Lun already enabled\n"); 9312 ccb->ccb_h.status = CAM_LUN_ALRDY_ENA; 9313 return; 9314 } 9315 9316 if (cel->grp6_len != 0 9317 || cel->grp7_len != 0) { 9318 /* 9319 * Don't (yet?) support vendor 9320 * specific commands. 9321 */ 9322 ccb->ccb_h.status = CAM_REQ_INVALID; 9323 printf("Non-zero Group Codes\n"); 9324 return; 9325 } 9326 9327 /* 9328 * Seems to be okay. 9329 * Setup our data structures. 9330 */ 9331 if (target != CAM_TARGET_WILDCARD && tstate == NULL) { 9332 tstate = ahd_alloc_tstate(ahd, target, channel); 9333 if (tstate == NULL) { 9334 xpt_print_path(ccb->ccb_h.path); 9335 printf("Couldn't allocate tstate\n"); 9336 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 9337 return; 9338 } 9339 } 9340 lstate = malloc(sizeof(*lstate), M_DEVBUF, M_NOWAIT); 9341 if (lstate == NULL) { 9342 xpt_print_path(ccb->ccb_h.path); 9343 printf("Couldn't allocate lstate\n"); 9344 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 9345 return; 9346 } 9347 memset(lstate, 0, sizeof(*lstate)); 9348 status = xpt_create_path(&lstate->path, /*periph*/NULL, 9349 xpt_path_path_id(ccb->ccb_h.path), 9350 xpt_path_target_id(ccb->ccb_h.path), 9351 xpt_path_lun_id(ccb->ccb_h.path)); 9352 if (status != CAM_REQ_CMP) { 9353 free(lstate, M_DEVBUF); 9354 xpt_print_path(ccb->ccb_h.path); 9355 printf("Couldn't allocate path\n"); 9356 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 9357 return; 9358 } 9359 SLIST_INIT(&lstate->accept_tios); 9360 SLIST_INIT(&lstate->immed_notifies); 9361 ahd_lock(ahd, &s); 9362 ahd_pause(ahd); 9363 if (target != CAM_TARGET_WILDCARD) { 9364 tstate->enabled_luns[lun] = lstate; 9365 ahd->enabled_luns++; 9366 9367 if ((ahd->features & AHD_MULTI_TID) != 0) { 9368 u_int targid_mask; 9369 9370 targid_mask = ahd_inb(ahd, TARGID) 9371 | (ahd_inb(ahd, TARGID + 1) << 8); 9372 9373 targid_mask |= target_mask; 9374 ahd_outb(ahd, TARGID, targid_mask); 9375 ahd_outb(ahd, TARGID+1, (targid_mask >> 8)); 9376 9377 ahd_update_scsiid(ahd, targid_mask); 9378 } else { 9379 u_int our_id; 9380 char channel; 9381 9382 channel = SIM_CHANNEL(ahd, sim); 9383 our_id = SIM_SCSI_ID(ahd, sim); 9384 9385 /* 9386 * This can only happen if selections 9387 * are not enabled 9388 */ 9389 if (target != our_id) { 9390 u_int sblkctl; 9391 char cur_channel; 9392 int swap; 9393 9394 sblkctl = ahd_inb(ahd, SBLKCTL); 9395 cur_channel = (sblkctl & SELBUSB) 9396 ? 'B' : 'A'; 9397 if ((ahd->features & AHD_TWIN) == 0) 9398 cur_channel = 'A'; 9399 swap = cur_channel != channel; 9400 ahd->our_id = target; 9401 9402 if (swap) 9403 ahd_outb(ahd, SBLKCTL, 9404 sblkctl ^ SELBUSB); 9405 9406 ahd_outb(ahd, SCSIID, target); 9407 9408 if (swap) 9409 ahd_outb(ahd, SBLKCTL, sblkctl); 9410 } 9411 } 9412 } else 9413 ahd->black_hole = lstate; 9414 /* Allow select-in operations */ 9415 if (ahd->black_hole != NULL && ahd->enabled_luns > 0) { 9416 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 9417 scsiseq1 |= ENSELI; 9418 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1); 9419 scsiseq1 = ahd_inb(ahd, SCSISEQ1); 9420 scsiseq1 |= ENSELI; 9421 ahd_outb(ahd, SCSISEQ1, scsiseq1); 9422 } 9423 ahd_unpause(ahd); 9424 ahd_unlock(ahd, &s); 9425 ccb->ccb_h.status = CAM_REQ_CMP; 9426 xpt_print_path(ccb->ccb_h.path); 9427 printf("Lun now enabled for target mode\n"); 9428 } else { 9429 struct scb *scb; 9430 int i, empty; 9431 9432 if (lstate == NULL) { 9433 ccb->ccb_h.status = CAM_LUN_INVALID; 9434 return; 9435 } 9436 9437 ahd_lock(ahd, &s); 9438 9439 ccb->ccb_h.status = CAM_REQ_CMP; 9440 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 9441 struct ccb_hdr *ccbh; 9442 9443 ccbh = &scb->io_ctx->ccb_h; 9444 if (ccbh->func_code == XPT_CONT_TARGET_IO 9445 && !xpt_path_comp(ccbh->path, ccb->ccb_h.path)){ 9446 printf("CTIO pending\n"); 9447 ccb->ccb_h.status = CAM_REQ_INVALID; 9448 ahd_unlock(ahd, &s); 9449 return; 9450 } 9451 } 9452 9453 if (SLIST_FIRST(&lstate->accept_tios) != NULL) { 9454 printf("ATIOs pending\n"); 9455 ccb->ccb_h.status = CAM_REQ_INVALID; 9456 } 9457 9458 if (SLIST_FIRST(&lstate->immed_notifies) != NULL) { 9459 printf("INOTs pending\n"); 9460 ccb->ccb_h.status = CAM_REQ_INVALID; 9461 } 9462 9463 if (ccb->ccb_h.status != CAM_REQ_CMP) { 9464 ahd_unlock(ahd, &s); 9465 return; 9466 } 9467 9468 xpt_print_path(ccb->ccb_h.path); 9469 printf("Target mode disabled\n"); 9470 xpt_free_path(lstate->path); 9471 free(lstate, M_DEVBUF); 9472 9473 ahd_pause(ahd); 9474 /* Can we clean up the target too? */ 9475 if (target != CAM_TARGET_WILDCARD) { 9476 tstate->enabled_luns[lun] = NULL; 9477 ahd->enabled_luns--; 9478 for (empty = 1, i = 0; i < 8; i++) 9479 if (tstate->enabled_luns[i] != NULL) { 9480 empty = 0; 9481 break; 9482 } 9483 9484 if (empty) { 9485 ahd_free_tstate(ahd, target, channel, 9486 /*force*/FALSE); 9487 if (ahd->features & AHD_MULTI_TID) { 9488 u_int targid_mask; 9489 9490 targid_mask = ahd_inb(ahd, TARGID) 9491 | (ahd_inb(ahd, TARGID + 1) 9492 << 8); 9493 9494 targid_mask &= ~target_mask; 9495 ahd_outb(ahd, TARGID, targid_mask); 9496 ahd_outb(ahd, TARGID+1, 9497 (targid_mask >> 8)); 9498 ahd_update_scsiid(ahd, targid_mask); 9499 } 9500 } 9501 } else { 9502 9503 ahd->black_hole = NULL; 9504 9505 /* 9506 * We can't allow selections without 9507 * our black hole device. 9508 */ 9509 empty = TRUE; 9510 } 9511 if (ahd->enabled_luns == 0) { 9512 /* Disallow select-in */ 9513 u_int scsiseq1; 9514 9515 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 9516 scsiseq1 &= ~ENSELI; 9517 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1); 9518 scsiseq1 = ahd_inb(ahd, SCSISEQ1); 9519 scsiseq1 &= ~ENSELI; 9520 ahd_outb(ahd, SCSISEQ1, scsiseq1); 9521 9522 if ((ahd->features & AHD_MULTIROLE) == 0) { 9523 printf("Configuring Initiator Mode\n"); 9524 ahd->flags &= ~AHD_TARGETROLE; 9525 ahd->flags |= AHD_INITIATORROLE; 9526 ahd_pause(ahd); 9527 ahd_loadseq(ahd); 9528 ahd_restart(ahd); 9529 /* 9530 * Unpaused. The extra unpause 9531 * that follows is harmless. 9532 */ 9533 } 9534 } 9535 ahd_unpause(ahd); 9536 ahd_unlock(ahd, &s); 9537 } 9538#endif 9539} 9540 9541static void 9542ahd_update_scsiid(struct ahd_softc *ahd, u_int targid_mask) 9543{ 9544#if NOT_YET 9545 u_int scsiid_mask; 9546 u_int scsiid; 9547 9548 if ((ahd->features & AHD_MULTI_TID) == 0) 9549 panic("ahd_update_scsiid called on non-multitid unit\n"); 9550 9551 /* 9552 * Since we will rely on the TARGID mask 9553 * for selection enables, ensure that OID 9554 * in SCSIID is not set to some other ID 9555 * that we don't want to allow selections on. 9556 */ 9557 if ((ahd->features & AHD_ULTRA2) != 0) 9558 scsiid = ahd_inb(ahd, SCSIID_ULTRA2); 9559 else 9560 scsiid = ahd_inb(ahd, SCSIID); 9561 scsiid_mask = 0x1 << (scsiid & OID); 9562 if ((targid_mask & scsiid_mask) == 0) { 9563 u_int our_id; 9564 9565 /* ffs counts from 1 */ 9566 our_id = ffs(targid_mask); 9567 if (our_id == 0) 9568 our_id = ahd->our_id; 9569 else 9570 our_id--; 9571 scsiid &= TID; 9572 scsiid |= our_id; 9573 } 9574 if ((ahd->features & AHD_ULTRA2) != 0) 9575 ahd_outb(ahd, SCSIID_ULTRA2, scsiid); 9576 else 9577 ahd_outb(ahd, SCSIID, scsiid); 9578#endif 9579} 9580 9581#ifdef AHD_TARGET_MODE 9582void 9583ahd_run_tqinfifo(struct ahd_softc *ahd, int paused) 9584{ 9585 struct target_cmd *cmd; 9586 9587 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_POSTREAD); 9588 while ((cmd = &ahd->targetcmds[ahd->tqinfifonext])->cmd_valid != 0) { 9589 9590 /* 9591 * Only advance through the queue if we 9592 * have the resources to process the command. 9593 */ 9594 if (ahd_handle_target_cmd(ahd, cmd) != 0) 9595 break; 9596 9597 cmd->cmd_valid = 0; 9598 ahd_dmamap_sync(ahd, ahd->parent_dmat /*shared_data_dmat*/, 9599 ahd->shared_data_map.dmamap, 9600 ahd_targetcmd_offset(ahd, ahd->tqinfifonext), 9601 sizeof(struct target_cmd), 9602 BUS_DMASYNC_PREREAD); 9603 ahd->tqinfifonext++; 9604 9605 /* 9606 * Lazily update our position in the target mode incoming 9607 * command queue as seen by the sequencer. 9608 */ 9609 if ((ahd->tqinfifonext & (HOST_TQINPOS - 1)) == 1) { 9610 u_int hs_mailbox; 9611 9612 hs_mailbox = ahd_inb(ahd, HS_MAILBOX); 9613 hs_mailbox &= ~HOST_TQINPOS; 9614 hs_mailbox |= ahd->tqinfifonext & HOST_TQINPOS; 9615 ahd_outb(ahd, HS_MAILBOX, hs_mailbox); 9616 } 9617 } 9618} 9619#endif 9620 9621static int 9622ahd_handle_target_cmd(struct ahd_softc *ahd, struct target_cmd *cmd) 9623{ 9624 struct ahd_tmode_tstate *tstate; 9625 struct ahd_tmode_lstate *lstate; 9626 struct ccb_accept_tio *atio; 9627 uint8_t *byte; 9628 int initiator; 9629 int target; 9630 int lun; 9631 9632 initiator = SCSIID_TARGET(ahd, cmd->scsiid); 9633 target = SCSIID_OUR_ID(cmd->scsiid); 9634 lun = (cmd->identify & MSG_IDENTIFY_LUNMASK); 9635 9636 byte = cmd->bytes; 9637 tstate = ahd->enabled_targets[target]; 9638 lstate = NULL; 9639 if (tstate != NULL) 9640 lstate = tstate->enabled_luns[lun]; 9641 9642 /* 9643 * Commands for disabled luns go to the black hole driver. 9644 */ 9645 if (lstate == NULL) 9646 lstate = ahd->black_hole; 9647 9648 atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios); 9649 if (atio == NULL) { 9650 ahd->flags |= AHD_TQINFIFO_BLOCKED; 9651 /* 9652 * Wait for more ATIOs from the peripheral driver for this lun. 9653 */ 9654 return (1); 9655 } else 9656 ahd->flags &= ~AHD_TQINFIFO_BLOCKED; 9657#ifdef AHD_DEBUG 9658 if ((ahd_debug & AHD_SHOW_TQIN) != 0) 9659 printf("%s: incoming command from %d for %d:%d%s\n", 9660 ahd_name(ahd), 9661 initiator, target, lun, 9662 lstate == ahd->black_hole ? "(Black Holed)" : ""); 9663#endif 9664 SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle); 9665 9666 if (lstate == ahd->black_hole) { 9667 /* Fill in the wildcards */ 9668 atio->ccb_h.target_id = target; 9669 atio->ccb_h.target_lun = lun; 9670 } 9671 9672 /* 9673 * Package it up and send it off to 9674 * whomever has this lun enabled. 9675 */ 9676 atio->sense_len = 0; 9677 atio->init_id = initiator; 9678 if (byte[0] != 0xFF) { 9679 /* Tag was included */ 9680 atio->tag_action = *byte++; 9681 atio->tag_id = *byte++; 9682 atio->ccb_h.flags = CAM_TAG_ACTION_VALID; 9683 } else { 9684 atio->ccb_h.flags = 0; 9685 } 9686 byte++; 9687 9688 /* Okay. Now determine the cdb size based on the command code */ 9689 switch (*byte >> CMD_GROUP_CODE_SHIFT) { 9690 case 0: 9691 atio->cdb_len = 6; 9692 break; 9693 case 1: 9694 case 2: 9695 atio->cdb_len = 10; 9696 break; 9697 case 4: 9698 atio->cdb_len = 16; 9699 break; 9700 case 5: 9701 atio->cdb_len = 12; 9702 break; 9703 case 3: 9704 default: 9705 /* Only copy the opcode. */ 9706 atio->cdb_len = 1; 9707 printf("Reserved or VU command code type encountered\n"); 9708 break; 9709 } 9710 9711 memcpy(atio->cdb_io.cdb_bytes, byte, atio->cdb_len); 9712 9713 atio->ccb_h.status |= CAM_CDB_RECVD; 9714 9715 if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) { 9716 /* 9717 * We weren't allowed to disconnect. 9718 * We're hanging on the bus until a 9719 * continue target I/O comes in response 9720 * to this accept tio. 9721 */ 9722#ifdef AHD_DEBUG 9723 if ((ahd_debug & AHD_SHOW_TQIN) != 0) 9724 printf("Received Immediate Command %d:%d:%d - %p\n", 9725 initiator, target, lun, ahd->pending_device); 9726#endif 9727 ahd->pending_device = lstate; 9728 ahd_freeze_ccb((union ccb *)atio); 9729 atio->ccb_h.flags |= CAM_DIS_DISCONNECT; 9730 } 9731 xpt_done((union ccb*)atio); 9732 return (0); 9733} 9734 9735#endif 9736 9737static int 9738ahd_createdmamem(bus_dma_tag_t tag, int size, int flags, bus_dmamap_t *mapp, 9739 void **vaddr, bus_addr_t *baddr, bus_dma_segment_t *seg, int *nseg, 9740 const char *myname, const char *what) 9741{ 9742 int error, level = 0; 9743 9744 if ((error = bus_dmamem_alloc(tag, size, PAGE_SIZE, 0, 9745 seg, 1, nseg, BUS_DMA_WAITOK)) != 0) { 9746 printf("%s: failed to allocate DMA mem for %s, error = %d\n", 9747 myname, what, error); 9748 goto out; 9749 } 9750 level++; 9751 9752 if ((error = bus_dmamem_map(tag, seg, *nseg, size, vaddr, 9753 BUS_DMA_WAITOK|BUS_DMA_COHERENT)) != 0) { 9754 printf("%s: failed to map DMA mem for %s, error = %d\n", 9755 myname, what, error); 9756 goto out; 9757 } 9758 level++; 9759 9760 if ((error = bus_dmamap_create(tag, size, 1, size, 0, 9761 BUS_DMA_WAITOK | flags, mapp)) != 0) { 9762 printf("%s: failed to create DMA map for %s, error = %d\n", 9763 myname, what, error); 9764 goto out; 9765 } 9766 level++; 9767 9768 9769 if ((error = bus_dmamap_load(tag, *mapp, *vaddr, size, NULL, 9770 BUS_DMA_WAITOK)) != 0) { 9771 printf("%s: failed to load DMA map for %s, error = %d\n", 9772 myname, what, error); 9773 goto out; 9774 } 9775 9776 *baddr = (*mapp)->dm_segs[0].ds_addr; 9777 9778 return 0; 9779out: 9780 printf("ahd_createdmamem error (%d)\n", level); 9781 switch (level) { 9782 case 3: 9783 bus_dmamap_destroy(tag, *mapp); 9784 /* FALLTHROUGH */ 9785 case 2: 9786 bus_dmamem_unmap(tag, *vaddr, size); 9787 /* FALLTHROUGH */ 9788 case 1: 9789 bus_dmamem_free(tag, seg, *nseg); 9790 break; 9791 default: 9792 break; 9793 } 9794 9795 return error; 9796} 9797 9798static void 9799ahd_freedmamem(bus_dma_tag_t tag, int size, bus_dmamap_t map, void *vaddr, 9800 bus_dma_segment_t *seg, int nseg) 9801{ 9802 9803 bus_dmamap_unload(tag, map); 9804 bus_dmamap_destroy(tag, map); 9805 bus_dmamem_unmap(tag, vaddr, size); 9806 bus_dmamem_free(tag, seg, nseg); 9807} 9808