ym_acpi.c revision 1.13
1/* $NetBSD: ym_acpi.c,v 1.13 2011/06/02 13:02:40 nonaka Exp $ */ 2 3/* 4 * Copyright (c) 2006 Jasper Wallace <jasper@pointless.net> 5 * All rights reserved. 6 * 7 * Copyright (c) 2002 Jared D. McNeill <jmcneill@invisible.ca> 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. The name of the author may not be used to endorse or promote products 16 * derived from this software without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 19 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 20 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 23 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 24 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 25 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 */ 30 31#include <sys/cdefs.h> 32__KERNEL_RCSID(0, "$NetBSD: ym_acpi.c,v 1.13 2011/06/02 13:02:40 nonaka Exp $"); 33 34#include <sys/param.h> 35#include <sys/systm.h> 36 37#include <dev/acpi/acpivar.h> 38 39#include <dev/audio_if.h> 40 41#include <dev/ic/ad1848reg.h> 42#include <dev/ic/opl3sa3reg.h> 43 44#include <dev/isa/ad1848var.h> 45#include <dev/isa/wssreg.h> 46#include <dev/isa/ymvar.h> 47 48 49static int ym_acpi_match(device_t, cfdata_t, void *); 50static void ym_acpi_attach(device_t, device_t, void *); 51 52CFATTACH_DECL(ym_acpi, sizeof(struct ym_softc), ym_acpi_match, 53 ym_acpi_attach, NULL, NULL); 54 55/* 56 * ym_acpi_match: autoconf(9) match routine 57 */ 58static int 59ym_acpi_match(device_t parent, cfdata_t match, void *aux) 60{ 61 struct acpi_attach_args *aa = aux; 62 63 if (aa->aa_node->ad_type != ACPI_TYPE_DEVICE) 64 return 0; 65 if (!(aa->aa_node->ad_devinfo->Valid & ACPI_VALID_HID)) 66 return 0; 67 if (!aa->aa_node->ad_devinfo->HardwareId.String) 68 return 0; 69 /* Yamaha OPL3-SA2 or OPL3-SA3 */ 70 if (strcmp("YMH0021", aa->aa_node->ad_devinfo->HardwareId.String)) 71 return 0; 72 73 return 1; 74} 75 76/* 77 * ym_acpi_attach: autoconf(9) attach routine 78 */ 79static void 80ym_acpi_attach(device_t parent, device_t self, void *aux) 81{ 82 struct ym_softc *sc = (struct ym_softc *)self; 83 struct acpi_attach_args *aa = aux; 84 struct acpi_resources res; 85 struct acpi_io *sb_io, *codec_io, *opl_io, *control_io; 86#if NMPU_YM > 0 87 struct acpi_io *mpu_io; 88#endif 89 struct acpi_irq *irq; 90 struct acpi_drq *playdrq, *recdrq; 91 struct ad1848_softc *ac = &sc->sc_ad1848.sc_ad1848; 92 ACPI_STATUS rv; 93 94 /* Parse our resources */ 95 rv = acpi_resource_parse(sc->sc_ad1848.sc_ad1848.sc_dev, 96 aa->aa_node->ad_handle, "_CRS", &res, 97 &acpi_resource_parse_ops_default); 98 if (ACPI_FAILURE(rv)) 99 return; 100 101 /* 102 * sc_sb_ioh @ 0 103 * sc_ioh @ 1 104 * sc_opl_ioh @ 2 105 * sc_mpu_ioh @ 3 106 * sc_controlioh @ 4 107 */ 108 109 /* Find and map our i/o registers */ 110 sc->sc_iot = aa->aa_iot; 111 sb_io = acpi_res_io(&res, 0); 112 codec_io = acpi_res_io(&res, 1); 113 opl_io = acpi_res_io(&res, 2); 114#if NMPU_YM > 0 115 mpu_io = acpi_res_io(&res, 3); 116#endif 117 control_io = acpi_res_io(&res, 4); 118 119 if (sb_io == NULL || codec_io == NULL || opl_io == NULL || 120#if NMPU_YM > 0 121 mpu_io == NULL || 122#endif 123 control_io == NULL) { 124 aprint_error_dev(self, "unable to find i/o registers resource\n"); 125 goto out; 126 } 127 if (bus_space_map(sc->sc_iot, sb_io->ar_base, sb_io->ar_length, 128 0, &sc->sc_sb_ioh) != 0) { 129 aprint_error_dev(self, "unable to map i/o registers (sb)\n"); 130 goto out; 131 } 132 if (bus_space_map(sc->sc_iot, codec_io->ar_base, codec_io->ar_length, 133 0, &sc->sc_ioh) != 0) { 134 aprint_error_dev(self, "unable to map i/o registers (codec)\n"); 135 goto out; 136 } 137 if (bus_space_map(sc->sc_iot, opl_io->ar_base, opl_io->ar_length, 138 0, &sc->sc_opl_ioh) != 0) { 139 aprint_error_dev(self, "unable to map i/o registers (opl)\n"); 140 goto out; 141 } 142#if NMPU_YM > 0 143 if (bus_space_map(sc->sc_iot, mpu_io->ar_base, mpu_io->ar_length, 144 0, &sc->sc_mpu_ioh) != 0) { 145 aprint_error_dev(self, "unable to map i/o registers (mpu)\n"); 146 goto out; 147 } 148#endif 149 if (bus_space_map(sc->sc_iot, control_io->ar_base, 150 control_io->ar_length, 0, &sc->sc_controlioh) != 0) { 151 aprint_error_dev(self, "unable to map i/o registers (control)\n"); 152 goto out; 153 } 154 155 sc->sc_ic = aa->aa_ic; 156 157 /* Find our IRQ */ 158 irq = acpi_res_irq(&res, 0); 159 if (irq == NULL) { 160 aprint_error_dev(self, "unable to find irq resource\n"); 161 /* XXX bus_space_unmap */ 162 goto out; 163 } 164 sc->ym_irq = irq->ar_irq; 165 166 /* Find our playback and record DRQs */ 167 playdrq = acpi_res_drq(&res, 0); 168 recdrq = acpi_res_drq(&res, 1); 169 if (playdrq == NULL) { 170 aprint_error_dev(self, "unable to find drq resources\n"); 171 /* XXX bus_space_unmap */ 172 goto out; 173 } 174 if (recdrq == NULL) { 175 /* half-duplex mode */ 176 sc->ym_recdrq = sc->ym_playdrq = playdrq->ar_drq; 177 } else { 178 sc->ym_playdrq = playdrq->ar_drq; 179 sc->ym_recdrq = recdrq->ar_drq; 180 } 181 182 ac->sc_iot = sc->sc_iot; 183 if (bus_space_subregion(sc->sc_iot, sc->sc_ioh, WSS_CODEC, 184 AD1848_NPORT, &ac->sc_ioh)) { 185 aprint_error_dev(self, "bus_space_subregion failed\n"); 186 /* XXX cleanup */ 187 goto out; 188 } 189 190 aprint_normal_dev(self, ""); 191 192 ac->mode = 2; 193 ac->MCE_bit = MODE_CHANGE_ENABLE; 194 195 sc->sc_ad1848.sc_ic = sc->sc_ic; 196 197 /* Attach our ym device */ 198 ym_attach(sc); 199 200 out: 201 acpi_resource_cleanup(&res); 202} 203