GENERIC revision 1.186
1# $NetBSD: GENERIC,v 1.186 2017/09/14 07:58:44 mrg Exp $
2#
3# GENERIC machine description file
4# 
5# This machine description file is used to generate the default NetBSD
6# kernel.  The generic kernel does not include all options, subsystems
7# and device drivers, but should be useful for most applications.
8#
9# The machine description file can be customised for your specific
10# machine to reduce the kernel size and improve its performance.
11#
12# For further information on compiling NetBSD kernels, see the config(8)
13# man page.
14#
15# For further information on hardware support for this architecture, see
16# the intro(4) man page.  For further information about kernel options
17# for this architecture, see the options(4) man page.  For an explanation
18# of each device driver in this file see the section 4 man page for the
19# device.
20
21include 	"arch/x68k/conf/std.x68k"
22
23options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
24
25#ident 		"GENERIC-$Revision: 1.186 $"
26
27makeoptions	COPTS="-O2 -fno-reorder-blocks"	# see share/mk/sys.mk
28
29maxusers	8
30
31## System kernel configuration.  See options(4) for more detail.
32
33
34## Options for variants of the m68k MPU
35## you must have at least the correct one; REQUIRED
36options 	M68030
37options 	M68040
38options 	M68060
39## If you want an optimized kernel for a specific processor, use either:
40#makeoptions	CMACHFLAGS="-m68030"
41#makeoptions	CMACHFLAGS="-m68040 -Wa,-m68030 -Wa,-m68851"
42#makeoptions	CMACHFLAGS="-m68060 -Wa,-m68030 -Wa,-m68851"
43
44
45#### System options specific to the x68k port
46
47options 	EXTENDED_MEMORY		# support for >16MB memory
48options 	FPU_EMULATE		# software fpu emulation for MC68030
49options 	FPSP			# floating point emulation for MC68040
50options 	M060SP			# int/fp emulation for MC68060
51#options 	JUPITER			# support for "Jupiter-X" accelerator
52#options 	MAPPEDCOPY		# use page mapping for large copyin/copyout
53#options 	ZSCONSOLE,ZSCN_SPEED="9600"	# use serial console
54
55
56#### System options that are the same for all ports
57
58## Root device configuration: change the ?'s if you are going to use a
59## nonstandard root partition (other than where the kernel is booted from)
60## and/or nonstandard root type (not ffs or nfs).  Normally this can be
61## automagically determined at boot time.
62
63config		netbsd	root on ? type ?
64#config		netbsd	root on sd0 type ffs
65
66## RTC is offset from GMT; -540 means JST-9
67options 	RTC_OFFSET=-540	# hardware clock is this many mins. west of GMT
68
69## System call tracing (see ktrace(1)).
70options 	KTRACE
71
72## System V compatible IPC subsystem.  (msgctl(2), semctl(2), and shmctl(2))
73options 	SYSVMSG		# System V message queues
74options 	SYSVSEM		# System V semaphores
75options 	SYSVSHM		# System V shared memory
76
77## Loadable kernel module support
78options 	MODULAR		# new style module(7) framework
79options 	MODULAR_DEFAULT_AUTOLOAD
80
81options 	USERCONF	# userconf(4) support
82#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
83options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
84
85# Enable experimental buffer queue strategy for better responsiveness under 
86# high disk I/O load. Use it with caution - it's not proven to be stable yet.
87#options 	BUFQ_READPRIO
88#options 	BUFQ_PRIOCSCAN
89
90## NFS boot options; not supported currently: needs nfsboot program
91#options 	NFS_BOOT_BOOTPARAM
92#options 	NFS_BOOT_BOOTP
93options 	NFS_BOOT_DHCP
94
95#### Debugging options
96
97## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at
98## serial console break or keyboard reset, where the PROM would normally
99## intercept.  DDB_HISTORY_SIZE adds up/down arrow command history.
100options 	DDB			# kernel dynamic debugger
101#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
102#options 	DDB_ONPANIC=1		# see also sysctl(7): `ddb.onpanic'
103#options 	PANICBUTTON		# interrupt switch invokes DDB
104
105## You may also use gdb, on another computer connected to this machine over
106## a serial port.  Both KGDB_DEV and KGDB_DEVRATE should be specified;
107## KGDB_DEV is a dev_t encoded device number of the serial port to use.
108## KGDB is not supported for now.
109#options 	KGDB			# support for kernel gdb
110#options 	KGDB_DEV=0xc00		# kgdb device number
111#options 	KGDB_DEVRATE=9600	# baud rate
112
113## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file),
114## such that gdb(1) can be used on a kernel coredump.
115
116#makeoptions	DEBUG="-g"
117
118## Adds code to the kernel that does internal consistency checks, and will
119## cause the kernel to panic if corruption of internal data structures
120## is detected.
121#options 	DIAGNOSTIC	# extra kernel sanity checking
122
123## Enable (possibly expensive) debugging code that may also display messages
124## on the system console
125#options 	DEBUG
126
127## These options enable verbose messages for several subsystems.
128## Warning, these may compile large string tables into the kernel!
129#options 	SCSIVERBOSE	# human readable SCSI error messages
130#options 	USBVERBOSE	# verbose USB device autoconfig messages
131
132## `INSECURE' turns off the kernel security level (securelevel = 0 always).
133## This allows writing to /dev/mem, loading kernel modules while multi-user,
134## and other insecurities good only for development work.  Do not use this
135## option on a production machine.
136#options 	INSECURE
137
138## `FDSCRIPTS' allows non-readable but executable scripts by providing a
139## pre-opened opaque file to the script interpreter.  `SETUIDSCRIPTS',
140## which implies FDSCRIPTS, allows scripts to be set-user-id using the same
141## opaque file mechanism.  Perl calls this "secure setuid scripts."
142
143#options 	FDSCRIPTS
144#options 	SETUIDSCRIPTS
145
146## Options for compatibility with previous releases foreign system binaries.
147
148include 	"conf/compat_netbsd09.config"
149
150options 	COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out
151#options 	COMPAT_M68K4K	# NetBSD/m68k4k binaries
152#options 	COMPAT_SUNOS	# SunOS 4.x binary compatibility; broken
153#options 	COMPAT_SVR4	# SVR4 binary compatibility; broken
154#options 	COMPAT_LINUX	# Linux/m68k binary compatibility
155
156## File systems.
157file-system	FFS		# Berkeley Fast Filesystem
158file-system	NFS		# Sun NFS-compatible filesystem client
159file-system	KERNFS		# kernel data-structure filesystem
160file-system	NULLFS		# NULL layered filesystem
161#file-system 	OVERLAY		# overlay file system
162file-system	MFS		# memory-based filesystem
163#file-system	FDESC		# user file descriptor filesystem
164#file-system	UMAPFS		# uid/gid remapping filesystem
165#file-system	LFS		# Log-structured filesystem (experimental)
166file-system	PROCFS		# /proc
167file-system	CD9660		# ISO 9660 + Rock Ridge file system
168#file-system	UNION		# union file system (a little buggy)
169file-system	MSDOSFS		# MS-DOS FAT filesystem(s).
170#file-system 	ADOSFS		# AmigaDOS filesystem
171file-system	PTYFS		# /dev/pts/N support
172file-system	TMPFS		# Efficient memory file-system
173#file-system	UDF		# experimental - OSTA UDF CD/DVD file-system
174
175## File system options.
176options 	NFSSERVER	# Sun NFS-compatible filesystem server
177#options 	QUOTA		# legacy UFS quotas
178#options 	QUOTA2		# new, in-filesystem UFS quotas
179#options 	FFS_EI		# FFS Endian Independent support
180options 	WAPBL		# File system journaling support
181#options 	UFS_DIRHASH	# UFS Large Directory Hashing - Experimental
182options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
183#options 	UFS_EXTATTR	# Extended attribute support for UFS1
184
185## Network protocol support.  In most environments, INET is required.
186options 	INET		# IP (Internet Protocol) v4
187options 	INET6		# IPV6
188#options 	IPSEC		# IP security
189#options 	IPSEC_DEBUG	# debug for IP security
190#options 	GATEWAY		# packet forwarding ("router switch")
191#options 	MROUTING	# packet forwarding of multicast packets
192#options 	PIM		# Protocol Independent Multicast
193#options 	DIRECTED_BROADCAST	# allow broadcasts through routers
194#options 	NETATALK	# AppleTalk (over Ethernet) protocol
195#options 	NTP		# Network Time Protocol in-kernel support
196#options 	PPS_SYNC	# Add serial line synchronization for NTP
197#options 	IPFILTER_LOG	# Add ipmon(8) logging for ipfilter device
198#options 	IPFILTER_LOOKUP	# ippool(8) support
199#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
200#options 	PPP_BSDCOMP	# Add BSD compression to ppp device
201#options 	PPP_DEFLATE	# Add deflate (libz) compression to ppp device
202#options 	PPP_FILTER	# Add active filters for ppp (via bpf)
203#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
204
205#options 	ALTQ		# Manipulate network interfaces' output queues
206#options 	ALTQ_BLUE	# Stochastic Fair Blue
207#options 	ALTQ_CBQ	# Class-Based Queueing
208#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
209#options 	ALTQ_FIFOQ	# First-In First-Out Queue
210#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
211#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
212#options 	ALTQ_LOCALQ	# Local queueing discipline
213#options 	ALTQ_PRIQ	# Priority Queueing
214#options 	ALTQ_RED	# Random Early Detection
215#options 	ALTQ_RIO	# RED with IN/OUT
216#options 	ALTQ_WFQ	# Weighted Fair Queueing
217
218
219#### Device configurations
220
221## Fundamental devices; see also std.x68k
222dmac0	at intio0 addr 0xe84000		# DMA controller
223xel0	at intio0
224opm0	at intio0 addr 0xe90000		# OPM: required for fdc
225
226## Display devices and console
227grfbus0	at mainbus0			# bitmapped displays
228grf0	at grfbus0 addr 0		# multiplane graphics
229grf1	at grfbus0 addr 1		# flexible graphics
230
231kbd0	at mfp0				# standard keyboard
232ite0	at grf0 grfaddr 0		# internal terminal emulator
233options 	ITE_KERNEL_ATTR=4	# bold for kernel messages
234					# see /sys/arch/x68k/dev/itevar.h
235
236## floppy disks
237fdc0	at intio0 addr 0xe94000 intr 96 dma 0 dmaintr 100 # floppy controller
238fd*	at fdc0 unit ?			# builtin floppy drives
239
240## SCSI devices
241scsirom0 at intio0 addr 0xfc0000		# Built-in SCSI BIOS
242scsirom1 at intio0 addr 0xea0020		# External SCSI BIOS
243spc0	at scsirom0				# genuin SCSI
244spc1	at scsirom1				# genuin SCSI
245scsibus* at spc?
246mha0	at scsirom1				# Mankai MK-HA1 (Mach-2)
247scsibus* at mha0
248
249sd*	at scsibus? target ? lun ?	# SCSI disks
250cd*	at scsibus? target ? lun ?	# SCSI CD-ROMs
251#st*	at scsibus? target ? lun ?	# SCSI tapes
252#ss*	at scsibus? target ? lun ?	# SCSI scanners
253#ch*	at scsibus? target ? lun ?	# SCSI changer devices
254#uk*	at scsibus? target ? lun ?	# SCSI unknown devices
255
256## Ports
257zsc0	at intio0 addr 0xe98000 intr 112
258zstty0	at zsc0 channel 0		# built-in RS-232C
259ms0	at zsc0 channel 1		# standard mouse
260#zsc1	at intio0 addr 0xeafc00 intr 113
261#zstty2	at zsc1 channel 0
262#zstty3	at zsc1 channel 1
263#zsc2	at intio0 addr 0xeafc10 intr 114
264#zstty4	at zsc2 channel 0
265#zstty5	at zsc2 channel 1
266par0	at intio0 addr 0xe8c000 	# Builtin printer port
267
268sram0	at intio0 addr 0xed0000		# battery-backuped static RAM
269pseudo-device	bell			# OPM bell
270
271powsw0	at mfp0				# Front switch
272#powsw1	at mfp0				# External power switch
273
274com0	at intio0 addr 0xefff00 intr 240	# PSX16550, port1
275com1	at intio0 addr 0xefff10 intr 241	# PSX16550, port2
276
277## Audio device
278vs0 at intio0 addr 0xe92000 dma 3 dmaintr 106
279audio*	at vs?
280
281spkr*	at audio?				# PC speaker (synthesized)
282
283## Network interfaces
284ne*	at intio0 addr 0xece300 intr 249	# Nereid Ethernet
285ne*	at intio0 addr 0xeceb00 intr 248	# Nereid Ethernet
286neptune0 at intio0 addr 0xece000 intr 249	# Neptune-X
287neptune1 at intio0 addr 0xece400 intr 249	# Neptune-X at alt. addr.
288ne*	at neptune? addr 0x300			# NE2000 or clone
289
290## Bank memory disk
291bmd*	at intio0 addr 0xece3f0		# Nereid
292bmd*	at intio0 addr 0xecebf0		# Nereid
293
294## MII/PHY support for USB ethernet
295#acphy*	at mii? phy ?
296
297## USB Controller and Devices; Experimental
298
299# Nereid USB controllers
300#slhci0	at intio0 addr 0xece380 intr 251
301#slhci1	at intio0 addr 0xeceb80 intr 250
302#options 	SLHCI_DEBUG
303
304# USB bus support
305#usb*	at slhci?
306
307# USB Hubs
308#uhub*	at usb?
309#uhub*	at uhub? port ?
310
311# USB HID device
312#uhidev*	at uhub? port ? configuration ? interface ?
313
314# USB Mice; not supported wscons yet
315#ums*	at uhidev? reportid ?
316#wsmouse* at ums? mux 0
317
318# USB Keyboards; not supported wscons yet
319#ukbd*	at uhidev? reportid ?
320#wskbd*	at ukbd? console ? mux 1
321
322# USB serial adapter
323#ucycom*	at uhidev? reportid ?
324
325# USB Generic HID devices
326#uhid*	at uhidev? reportid ?
327
328# USB Printer
329#ulpt*	at uhub? port ? configuration ? interface ?
330
331# USB Modem
332#umodem*	at uhub? port ? configuration ?
333#ucom*	at umodem?
334
335# Option N.V. Wireless WAN modems
336#uhso*	at uhub? port ? configuration ?
337
338# USB Mass Storage; wd not supported
339#umass*	at uhub? port ? configuration ? interface ?
340#atapibus* at umass?
341#scsibus* at umass?
342#wd* at umass?
343
344# USB audio
345#uaudio*	at uhub? port ? configuration ?
346
347# USB MIDI
348#umidi* at uhub? port ? configuration ?
349
350# USB IrDA
351# USB-IrDA bridge spec
352#uirda* at uhub? port ? configuration ? interface ?
353#irframe* at uirda?
354
355# SigmaTel STIr4200 USB/IrDA Bridge
356#ustir* at uhub? port ?
357#irframe* at ustir?
358
359# USB Ethernet adapters
360#aue*	at uhub? port ?		# ADMtek AN986 Pegasus based adapters
361#axe*	at uhub? port ?		# ASIX AX88172 based adapters
362#cue*	at uhub? port ?		# CATC USB-EL1201A based adapters
363#kue*	at uhub? port ?		# Kawasaki LSI KL5KUSB101B based adapters
364#url*	at uhub? port ?		# Realtek RTL8150L based adapters
365#udav*	at uhub? port ?		# Davicom DM9601 based adapters
366
367# Prolific PL2301/PL2302 host-to-host adapter
368#upl*	at uhub? port ?
369
370# Serial adapters
371#uftdi*	at uhub? port ?		# FTDI FT8U100AX serial adapter
372#ucom*	at uftdi? portno ?
373
374#umct*	at uhub? port ?		# MCT USB-RS232 serial adapter
375#ucom*	at umct? portno ?
376
377#uplcom*	at uhub? port ?		# I/O DATA USB-RSAQ2 serial adapter
378#ucom*	at uplcom? portno ?
379
380#uvscom*	at uhub? port ?		# SUNTAC Slipper U VS-10U serial adapter
381#ucom*	at uvscom? portno ?
382
383# Diamond Multimedia Rio 500
384#urio*	at uhub? port ?
385
386# USB Handspring Visor
387#uvisor*	at uhub? port ?
388#ucom*	at uvisor?
389
390# Kyocera AIR-EDGE PHONE
391#ukyopon* at uhub? port ?
392#ucom*	at ukyopon? portno ?
393
394# USB scanners
395#uscanner* at uhub? port ?
396
397# USB scanners that use SCSI emulation, e.g., HP5300
398#usscanner* at uhub? port ?
399#scsibus* at usscanner? channel ?
400
401# Y@P firmware loader
402#uyap* at uhub? port ?
403
404# D-Link DSB-R100 USB radio
405#udsbr*	at uhub? port ?
406#radio*	at udsbr?
407
408# USB Generic driver
409#ugen*	at uhub? port ?
410
411
412#### Pseudo devices
413
414#
415# accept filters
416#pseudo-device   accf_data		# "dataready" accept filter
417#pseudo-device   accf_http		# "httpready" accept filter
418
419## A disk-like interface to files.  Can be used to create floppy, CD,
420## miniroot images, etc.
421
422pseudo-device	vnd	
423#options 	VND_COMPRESSION		# compressed vnd(4)
424
425## Concatenated and striped disks; with this, you can create a software-based
426## disk array similar to a "RAID 0" setup.  See ccd(4).
427
428#pseudo-device	ccd
429
430## Cryptographic disk devices.  See cgd(4).
431
432#pseudo-device	cgd
433
434## RAIDframe disk driver: software RAID driver.  See raid(4).
435
436pseudo-device	raid	
437options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
438# Options to enable various other RAIDframe RAID types.
439# options 	RF_INCLUDE_EVENODD=1
440# options 	RF_INCLUDE_RAID5_RS=1
441# options 	RF_INCLUDE_PARITYLOGGING=1
442# options 	RF_INCLUDE_CHAINDECLUSTER=1
443# options 	RF_INCLUDE_INTERDECLUSTER=1
444# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
445# options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
446
447
448## Memory disk device, used on boot floppies with compressed
449## kernel-plus-root-disk images.
450
451#pseudo-device	md	
452
453## Loopback network interface; required
454pseudo-device	loop
455
456## SLIP and CSLIP interfaces, for IP over a serial line.
457pseudo-device	sl		
458
459## PPP, the successor to SLIP.  See pppd(8).
460pseudo-device	ppp		
461
462## PPP over Ethernet (RFC 2516)
463pseudo-device	pppoe
464
465## Network "tunnel" device, allowing protocol stacks to run in the userland.
466## This is used by the third-party user-mode "ppp" program, and others.
467#pseudo-device	tun		
468#pseudo-device	tap			# virtual Ethernet
469
470## Generic L3 over IP tunnel
471#pseudo-device	gre			# generic L3 over IP tunnel
472
473## Berkeley Packet Filter, required to run RARPD.  A generic C-language
474## interface that allows selective examining of incoming packets.
475pseudo-device	bpfilter
476
477#pseudo-device	carp			# Common Address Redundancy Protocol
478
479## IP Filter, used in firewall and NAT applications.  See ipnat(8) for
480## one example of the use of the IP Filter.
481#pseudo-device	ipfilter
482
483## for IPv6
484pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
485#pseudo-device	faith			# IPv[46] tcp relay translation i/f
486pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
487
488## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4).
489pseudo-device	vlan
490
491## Simple inter-network traffic bridging
492pseudo-device	bridge
493#options 	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
494pseudo-device	agr			# IEEE 802.3ad link aggregation
495
496#### Other device configuration
497
498## Pseudo ttys, required for network logins and programs like screen.
499
500pseudo-device	pty			# pseudo-terminals
501
502## Random device, used to implement /dev/random (a source of random noise),
503## and generate randomness for some kernel formulae.
504
505
506pseudo-device	clockctl		# user control of clock subsystem
507pseudo-device	ksyms			# /dev/ksyms
508#pseudo-device	pf			# PF packet filter
509#pseudo-device	pflog			# PF log if
510#pseudo-device	fss			# file system snapshot device
511
512# Veriexec
513#
514# a pseudo device needed for veriexec
515#pseudo-device	veriexec
516#
517# Uncomment the fingerprint methods below that are desired. Note that
518# removing fingerprint methods will have almost no impact on the kernel
519# code size.
520#
521#options VERIFIED_EXEC_FP_SHA256
522#options VERIFIED_EXEC_FP_SHA384
523#options VERIFIED_EXEC_FP_SHA512
524