GENERIC revision 1.65
1# $NetBSD: GENERIC,v 1.65 2000/02/29 06:32:30 simonb Exp $ 2 3# GENERIC Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E) 4# Supports root on: ie0, le0, sd*, ... 5 6include "arch/sun3/conf/std.sun3" 7 8#ident "GENERIC-$Revision: 1.65 $" 9 10# Machines to be supported by this kernel 11options FPU_EMULATE 12options HAVECACHE # Sun3/260 VAC 13 14# Needs to be set per system. i.e change these as you see fit 15maxusers 4 16 17# Standard system options 18options KTRACE # system call tracing 19options SYSVMSG # System V message queues 20options SYSVSEM # System V semaphores 21options SYSVSHM # System V shared memory 22#options SHMMAXPGS=1024 # 1024 pages is the default 23options LKM # loadable kernel modules 24#options INSECURE # disable kernel security level 25#options UCONSOLE # Allow non-root TIOCCONS 26 27# Which kernel debugger? Uncomment either this: 28options DDB 29# ... or these for KGDB (gdb remote target) 30#makeoptions DEBUG="-g" # debugging symbols for gdb 31#options KGDB 32#options KGDBDEV=0x0C01 # ttya=0C00 ttyb=0C01 33 34# Other debugging options 35#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 36#options DEBUG # kernel debugging code 37#options DIAGNOSTIC # extra kernel sanity checking 38#options KMEMSTATS # kernel memory statistics (vmstat -m) 39#options PMAP_DEBUG 40#options SCSIDEBUG 41#options SCSIVERBOSE # Verbose SCSI errors 42 43# Compatability options 44options COMPAT_SUNOS # can run SunOS 4.1.1 executables 45#options COMPAT_SVR4 # can run SVR4 executables 46options COMPAT_43 # and 4.3BSD and ... 47options COMPAT_10 # NetBSD 1.0 48options COMPAT_11 # NetBSD 1.1 49options COMPAT_12 # NetBSD 1.2 50options COMPAT_13 # NetBSD 1.3 51options COMPAT_14 # NetBSD 1.4 52#options COMPAT_LINUX # can run Linux/m68k executables 53#options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 54 55# Filesystem options 56file-system FFS # Berkeley Fast Filesystem 57file-system NFS # Sun NFS client support 58file-system CD9660 # ISO 9660 + Rock Ridge file system 59file-system FDESC # /dev/fd/* 60file-system KERNFS # /kern 61file-system NULLFS # loopback file system 62file-system OVERLAY # overlay file system 63file-system PROCFS # /proc 64file-system UNION # union file system 65file-system MFS # memory-based filesystem 66 67options NFSSERVER # nfs server support 68options QUOTA # FFS quotas 69#options FFS_EI # FFS Endian Independant support 70#options SOFTDEP # FFS soft updates support. 71 72# Pull in config fragments for kernel crypto. This is required for 73# options IPSEC etc. to work. If you want to run with IPSEC, uncomment 74# one of these, based on whether you use crypto-us or crypto-intl, and 75# adjust the prefixes as necessary. 76 77#prefix ../crypto-us/sys 78#cinclude "conf/files.crypto-us" 79#prefix 80 81#prefix ../crypto-intl/sys 82#cinclude "conf/files.crypto-intl" 83#prefix 84 85# Networking options 86options INET # IP prototol stack support 87options INET6 # IPV6 88#options IPSEC # IP security 89#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 90#options IPSEC_DEBUG # debug for IP security 91options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP 92#options GATEWAY # IP packet forwarding 93#options ISO,TPIP # OSI networking 94#options EON # OSI tunneling over IP 95#options CCITT,LLC,HDLC # X.25 96options PFIL_HOOKS # pfil(9) packet filter hooks. 97 98# Work-around for root on slow servers (insurance...) 99options NFS_BOOT_RWSIZE=1024 100options NFS_BOOT_BOOTPARAM 101 102config netbsd root on ? type ? 103 104# On-board I/O space (required) 105include "arch/sun3/conf/obio.sun3" 106 107# On-board memory (optional) 108# See frame-buffers 109obmem0 at mainbus? 110 111# VME bus support (optional) 112# One unit for each address space 113vme0 at mainbus? # A16/D16 114vme1 at mainbus? # A16/D32 115vme2 at mainbus? # A24/D16 116vme3 at mainbus? # A24/D32 117vme4 at mainbus? # A32/D16 118vme5 at mainbus? # A32/D32 119 120# 121# Serial ports 122# 123zstty0 at zsc1 channel 0 # ttya 124zstty1 at zsc1 channel 1 # ttyb 125 126kbd0 at zsc0 channel 0 # keyboard 127ms0 at zsc0 channel 1 # mouse 128 129# 130# Network devices 131# 132 133# Intel Ethernet (onboard, or VME) 134ie0 at obio0 addr 0x0C0000 ipl 3 135ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 136 137# Lance Ethernet (only onboard) 138le0 at obio0 addr 0x120000 ipl 3 139 140# All Sun3 machines with an "le" (3/50, 3/60) should be 141# presumed to have the old, buggy LANCE chip. (Rev. C) 142options LANCE_REVC_BUG 143 144# 145# Disk and tape devices 146# 147 148# Sun3 "si" SCSI controller (NCR 5380) 149# This driver has several flags which may be enabled using 150# the "flags" directive. Valid flags are: 151# 152# 0x000ff Set (1<<target) to disable disconnect/reselect 153# 0x0ff00 Set (1<<(target+8)) to disable parity checking 154# 0x10000 Set this bit to disable DMA interrupts (poll) 155# 0x20000 Set this bit to disable DMA entirely (use PIO) 156# 157# For example: "flags 0x1000f" would disable DMA interrupts, 158# and disable disconnect/reselect for targets 0-3 159si0 at obio0 addr 0x140000 ipl 2 160si0 at vme2 addr 0x200000 ipl 2 vect 0x40 161si1 at vme2 addr 0x204000 ipl 2 vect 0x41 162 163# Xylogics 450/451 controllers (VME A16/D16) 164xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 165xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 166xy* at xyc? drive ? 167 168# Xylogics 7053 controllers (VME A16/D32) 169xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 170xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 171xd* at xdc? drive ? 172 173# Xylogics 472 tape controllers? 174 175# Sun3/E SCSI+Ethernet board (VME A24/D16) 176# Note: the board uses vect and vect+1 177sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75 178sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77 179si* at sebuf? 180ie* at sebuf? 181 182# 183# Frame buffer devices 184# 185 186include "arch/sun3/conf/bw2.sun3" 187include "arch/sun3/conf/cg4.sun3" 188 189# 3/60 P4 accelerated 8-bit color frame buffer 190# cgsix0 at obmem0 addr 0xff000000 191 192# 3/60 P4 24-bit color frame buffer 193# cgeight0 at obmem0 addr 0xff300000 194 195# Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16). 196cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8 197 198# Support for the CG9 24-bit frame buffer (VME A32/D32). 199# cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA 200 201# 202# SCSI infrastructure 203# 204scsibus* at scsi? 205 206sd* at scsibus? target ? lun ? # SCSI disks 207st* at scsibus? target ? lun ? # SCSI tapes 208cd* at scsibus? target ? lun ? # SCSI CD-ROMs 209ch* at scsibus? target ? lun ? # SCSI changer devices 210ss* at scsibus? target ? lun ? # SCSI scanners 211uk* at scsibus? target ? lun ? # unknown SCSI devices 212 213# Memory-disk drivers 214pseudo-device md 2 215 216# Misc. 217pseudo-device loop 1 # network loopback 218pseudo-device bpfilter 8 # packet filter 219pseudo-device sl 2 # CSLIP 220pseudo-device ppp 2 # PPP 221pseudo-device tun 2 # network tunneling over tty 222#pseudo-device gre 2 # generic L3 over IP tunnel 223#pseudo-device ipfilter # ip filter 224pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 225#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 226# rnd is EXPERIMENTAL 227#pseudo-device rnd # /dev/random and in-kernel generator 228 229pseudo-device pty 32 # pseudo-terminals 230#pseudo-device vnd 4 # paging to files 231#pseudo-device ccd 4 # concatenated disks 232#pseudo-device raid 4 # RAIDframe disk driver 233#options RAID_AUTOCONFIG # auto-configuration of RAID components 234