GENERIC revision 1.185
1# $NetBSD: GENERIC,v 1.185 2020/09/10 02:06:25 rin Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21# Supports Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E) 22# Supports root on: ie0, le0, sd*, ... 23 24include "arch/sun3/conf/std.sun3" 25 26#options INCLUDE_CONFIG_FILE # embed config file in kernel binary 27 28#ident "GENERIC-$Revision: 1.185 $" 29 30makeoptions COPTS="-Os -fno-unwind-tables -fno-omit-frame-pointer" 31 # Bootloader has size limit (~2MB). -fno-omit-frame-pointer is 32 # necessary for backtraces in DDB. 33 34# Machines to be supported by this kernel 35options FPU_EMULATE 36options HAVECACHE # Sun3/260 VAC 37 38# Needs to be set per system. i.e change these as you see fit 39maxusers 4 40 41# Standard system options 42options KTRACE # system call tracing 43options SYSVMSG # System V message queues 44options SYSVSEM # System V semaphores 45options SYSVSHM # System V shared memory 46 47#options MODULAR # new style module(7) framework 48#options MODULAR_DEFAULT_AUTOLOAD 49 50#options INSECURE # disable kernel security level 51#options USERCONF # userconf(4) support 52options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 53#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 54 55# Alternate buffer queue strategies for better responsiveness under high 56# disk I/O load. 57#options BUFQ_READPRIO 58#options BUFQ_PRIOCSCAN 59 60# Which kernel debugger? Uncomment either this: 61options DDB 62# ... or these for KGDB (gdb remote target) 63makeoptions DEBUG="-g" # debugging symbols for gdb 64#options KGDB 65#options KGDB_DEV=0x0C01 # ttya=0C00 ttyb=0C01 66 67# Other debugging options 68options DDB_HISTORY_SIZE=512 # enable history editing in DDB 69#options DEBUG # kernel debugging code 70#options DIAGNOSTIC # extra kernel sanity checking 71#options PMAP_DEBUG 72#options SCSIDEBUG 73#options SCSIVERBOSE # Verbose SCSI errors 74 75# Compatibility options 76# Originally in NetBSD 1.0, but limited to 6.0 for size. 77#include "conf/compat_netbsd10.config" 78include "conf/compat_netbsd60.config" 79 80#options COMPAT_SUNOS # can run SunOS 4.1.1 executables 81#options COMPAT_AOUT_M68K # support for NetBSD a.out executables 82#options COMPAT_LINUX # can run Linux/m68k executables 83#options EXEC_AOUT # support for a.out executables 84 85# Filesystem options 86file-system FFS # Berkeley Fast Filesystem 87file-system NFS # Sun NFS client support 88file-system CD9660 # ISO 9660 + Rock Ridge file system 89#file-system FDESC # /dev/fd/* 90#file-system KERNFS # /kern 91file-system NULLFS # loopback file system 92#file-system OVERLAY # overlay file system 93file-system PROCFS # /proc 94#file-system UNION # union file system 95file-system MFS # memory-based filesystem 96file-system PTYFS # /dev/pts/N support 97# Disabled as 20KB larger than MFS. 98#file-system TMPFS # Efficient memory file-system 99#file-system UDF # experimental - OSTA UDF CD/DVD file-system 100 101#options NFSSERVER # nfs server support 102#options QUOTA # legacy UFS quotas 103#options QUOTA2 # new, in-filesystem UFS quotas 104#options FFS_EI # FFS Endian Independent support 105#options WAPBL # File system journaling support 106#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 107options FFS_NO_SNAPSHOT # No FFS snapshot support 108#options UFS_EXTATTR # Extended attribute support for UFS1 109 110# Networking options 111options INET # IP protocol stack support 112#options INET6 # IPV6 113#options IPSEC # IP security 114#options IPSEC_DEBUG # debug for IP security 115#options GATEWAY # IP packet forwarding 116#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 117 118#options ALTQ # Manipulate network interfaces' output queues 119#options ALTQ_BLUE # Stochastic Fair Blue 120#options ALTQ_CBQ # Class-Based Queueing 121#options ALTQ_CDNR # Diffserv Traffic Conditioner 122#options ALTQ_FIFOQ # First-In First-Out Queue 123#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 124#options ALTQ_HFSC # Hierarchical Fair Service Curve 125#options ALTQ_LOCALQ # Local queueing discipline 126#options ALTQ_PRIQ # Priority Queueing 127#options ALTQ_RED # Random Early Detection 128#options ALTQ_RIO # RED with IN/OUT 129#options ALTQ_WFQ # Weighted Fair Queueing 130 131# Work-around for root on slow servers (insurance...) 132options NFS_BOOT_RWSIZE=1024 133options NFS_BOOT_BOOTPARAM 134 135config netbsd root on ? type ? 136 137# On-board I/O space (required) 138include "arch/sun3/conf/obio.sun3" 139 140# On-board memory (optional) 141# See frame-buffers 142obmem0 at mainbus? 143 144# VME bus support (optional) 145# One unit for each address space 146vme0 at mainbus? # A16/D16 147vme1 at mainbus? # A16/D32 148vme2 at mainbus? # A24/D16 149vme3 at mainbus? # A24/D32 150vme4 at mainbus? # A32/D16 151vme5 at mainbus? # A32/D32 152 153# 154# Serial ports 155# 156zstty0 at zsc1 channel 0 # ttya 157zstty1 at zsc1 channel 1 # ttyb 158 159kbd0 at zsc0 channel 0 # keyboard 160ms0 at zsc0 channel 1 # mouse 161 162# 163# Network devices 164# 165 166# Intel Ethernet (onboard, or VME) 167ie0 at obio0 addr 0x0C0000 ipl 3 168ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 169 170# Lance Ethernet (only onboard) 171le0 at obio0 addr 0x120000 ipl 3 172 173# All Sun3 machines with an "le" (3/50, 3/60) should be 174# presumed to have the old, buggy LANCE chip. (Rev. C) 175options LANCE_REVC_BUG 176 177# 178# Disk and tape devices 179# 180 181# Sun3 "si" SCSI controller (NCR 5380) 182# This driver has several flags which may be enabled using 183# the "flags" directive. Valid flags are: 184# 185# 0x000ff Set (1<<target) to disable disconnect/reselect 186# 0x0ff00 Set (1<<(target+8)) to disable parity checking 187# 0x10000 Set this bit to disable DMA interrupts (poll) 188# 0x20000 Set this bit to disable DMA entirely (use PIO) 189# 190# For example: "flags 0x1000f" would disable DMA interrupts, 191# and disable disconnect/reselect for targets 0-3 192si0 at obio0 addr 0x140000 ipl 2 193si0 at vme2 addr 0x200000 ipl 2 vect 0x40 194si1 at vme2 addr 0x204000 ipl 2 vect 0x41 195 196# Xylogics 450/451 controllers (VME A16/D16) 197xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 198xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 199xy* at xyc? drive ? 200 201# Xylogics 7053 controllers (VME A16/D32) 202xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 203xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 204xd* at xdc? drive ? 205 206# Xylogics 472 tape controllers? 207 208# Sun3/E SCSI+Ethernet board (VME A24/D16) 209# Note: the board uses vect and vect+1 210sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75 211sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77 212si* at sebuf? 213ie* at sebuf? 214 215# 216# Frame buffer devices 217# 218 219include "arch/sun3/conf/bw2.sun3" 220include "arch/sun3/conf/cg4.sun3" 221 222# 3/60 P4 accelerated 8-bit color frame buffer 223# cgsix0 at obmem0 addr 0xff000000 224 225# 3/60 P4 24-bit color frame buffer 226# cgeight0 at obmem0 addr 0xff300000 227 228# Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16). 229cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8 230 231# Support for the CG9 24-bit frame buffer (VME A32/D32). 232# cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA 233 234# 235# SCSI infrastructure 236# 237scsibus* at scsi? 238 239sd* at scsibus? target ? lun ? # SCSI disks 240st* at scsibus? target ? lun ? # SCSI tapes 241cd* at scsibus? target ? lun ? # SCSI CD-ROMs 242#ch* at scsibus? target ? lun ? # SCSI changer devices 243#ss* at scsibus? target ? lun ? # SCSI scanners 244uk* at scsibus? target ? lun ? # unknown SCSI devices 245 246# 247# accept filters 248#pseudo-device accf_data # "dataready" accept filter 249#pseudo-device accf_http # "httpready" accept filter 250 251# Memory-disk drivers 252pseudo-device md 253 254# Misc. 255pseudo-device loop # network loopback 256pseudo-device bpfilter # packet filter 257#pseudo-device carp # Common Address Redundancy Protocol 258pseudo-device sl # CSLIP 259pseudo-device ppp # PPP 260#pseudo-device pppoe # PPP over Ethernet (RFC 2516) 261#pseudo-device tun # network tunneling over tty 262#pseudo-device tap # virtual Ethernet 263#pseudo-device gre # generic L3 over IP tunnel 264#pseudo-device npf # NPF packet filter 265#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 266#pseudo-device faith # IPv[46] tcp relay translation i/f 267#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 268pseudo-device vlan # IEEE 802.1q encapsulation 269#pseudo-device bridge # simple inter-network bridging 270#pseudo-device agr # IEEE 802.3ad link aggregation 271 272pseudo-device pty # pseudo-terminals 273pseudo-device vnd # paging to files 274#options VND_COMPRESSION # compressed vnd(4) 275#pseudo-device ccd # concatenated disks 276#pseudo-device cgd # cryptographic disk devices 277#pseudo-device raid # RAIDframe disk driver 278#options RAID_AUTOCONFIG # auto-configuration of RAID components 279# Options to enable various other RAIDframe RAID types. 280#options RF_INCLUDE_EVENODD=1 281#options RF_INCLUDE_RAID5_RS=1 282#options RF_INCLUDE_PARITYLOGGING=1 283#options RF_INCLUDE_CHAINDECLUSTER=1 284#options RF_INCLUDE_INTERDECLUSTER=1 285#options RF_INCLUDE_PARITY_DECLUSTERING=1 286#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 287#pseudo-device fss # file system snapshot device 288pseudo-device clockctl # user control of clock subsystem 289pseudo-device ksyms # /dev/ksyms 290 291# Veriexec 292# include "dev/veriexec.config" 293