GENERIC revision 1.159
1# $NetBSD: GENERIC,v 1.159 2012/03/10 21:51:57 joerg Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21# Supports Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E) 22# Supports root on: ie0, le0, sd*, ... 23 24include "arch/sun3/conf/std.sun3" 25 26options INCLUDE_CONFIG_FILE # embed config file in kernel binary 27 28#ident "GENERIC-$Revision: 1.159 $" 29 30makeoptions COPTS="-Os" # bootloader has size limit (~2MB) 31 32# Machines to be supported by this kernel 33options FPU_EMULATE 34options HAVECACHE # Sun3/260 VAC 35 36# Needs to be set per system. i.e change these as you see fit 37maxusers 4 38 39# Standard system options 40options KTRACE # system call tracing 41options SYSVMSG # System V message queues 42options SYSVSEM # System V semaphores 43options SYSVSHM # System V shared memory 44 45#options MODULAR # new style module(7) framework 46 47#options INSECURE # disable kernel security level 48#options USERCONF # userconf(4) support 49#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 50options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 51 52# Enable experimental buffer queue strategy for better responsiveness under 53# high disk I/O load. Use it with caution - it's not proven to be stable yet. 54#options BUFQ_READPRIO 55#options BUFQ_PRIOCSCAN 56 57# Which kernel debugger? Uncomment either this: 58options DDB 59# ... or these for KGDB (gdb remote target) 60#makeoptions DEBUG="-g" # debugging symbols for gdb 61#options KGDB 62#options KGDB_DEV=0x0C01 # ttya=0C00 ttyb=0C01 63 64# Other debugging options 65options DDB_HISTORY_SIZE=512 # enable history editing in DDB 66#options DEBUG # kernel debugging code 67#options DIAGNOSTIC # extra kernel sanity checking 68#options KMEMSTATS # kernel memory statistics (vmstat -m) 69#options PMAP_DEBUG 70#options SCSIDEBUG 71#options SCSIVERBOSE # Verbose SCSI errors 72 73# Compatibility options 74options COMPAT_SUNOS # can run SunOS 4.1.1 executables 75#options COMPAT_SVR4 # can run SVR4 executables 76options COMPAT_43 # and 4.3BSD and ... 77options COMPAT_10 # NetBSD 1.0 78options COMPAT_11 # NetBSD 1.1 79options COMPAT_12 # NetBSD 1.2 80options COMPAT_13 # NetBSD 1.3 81options COMPAT_14 # NetBSD 1.4 82options COMPAT_15 # NetBSD 1.5 83options COMPAT_16 # NetBSD 1.6 84options COMPAT_20 # NetBSD 2.0 85options COMPAT_30 # NetBSD 3.0 86options COMPAT_40 # NetBSD 4.0 87options COMPAT_50 # NetBSD 5.0 compatibility. 88options COMPAT_AOUT_M68K # support for NetBSD a.out executables 89#options COMPAT_LINUX # can run Linux/m68k executables 90options EXEC_AOUT # support for a.out executables 91#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 92options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 93 94# Filesystem options 95file-system FFS # Berkeley Fast Filesystem 96file-system NFS # Sun NFS client support 97file-system CD9660 # ISO 9660 + Rock Ridge file system 98file-system FDESC # /dev/fd/* 99file-system KERNFS # /kern 100file-system NULLFS # loopback file system 101#file-system OVERLAY # overlay file system 102file-system PROCFS # /proc 103#file-system UNION # union file system 104file-system MFS # memory-based filesystem 105file-system PTYFS # /dev/pts/N support 106file-system TMPFS # Efficient memory file-system 107#file-system UDF # experimental - OSTA UDF CD/DVD file-system 108 109options NFSSERVER # nfs server support 110#options QUOTA # legacy UFS quotas 111#options QUOTA2 # new, in-filesystem UFS quotas 112#options FFS_EI # FFS Endian Independent support 113options WAPBL # File system journaling support 114#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 115options FFS_NO_SNAPSHOT # No FFS snapshot support 116 117# Networking options 118options INET # IP protocol stack support 119options INET6 # IPV6 120#options IPSEC # IP security 121#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 122#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 123#options IPSEC_DEBUG # debug for IP security 124#options GATEWAY # IP packet forwarding 125#options ISO,TPIP # OSI networking 126#options EON # OSI tunneling over IP 127options PFIL_HOOKS # pfil(9) packet filter hooks. 128#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 129 130#options ALTQ # Manipulate network interfaces' output queues 131#options ALTQ_BLUE # Stochastic Fair Blue 132#options ALTQ_CBQ # Class-Based Queueing 133#options ALTQ_CDNR # Diffserv Traffic Conditioner 134#options ALTQ_FIFOQ # First-In First-Out Queue 135#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 136#options ALTQ_HFSC # Hierarchical Fair Service Curve 137#options ALTQ_LOCALQ # Local queueing discipline 138#options ALTQ_PRIQ # Priority Queueing 139#options ALTQ_RED # Random Early Detection 140#options ALTQ_RIO # RED with IN/OUT 141#options ALTQ_WFQ # Weighted Fair Queueing 142 143# Work-around for root on slow servers (insurance...) 144options NFS_BOOT_RWSIZE=1024 145options NFS_BOOT_BOOTPARAM 146 147config netbsd root on ? type ? 148 149# On-board I/O space (required) 150include "arch/sun3/conf/obio.sun3" 151 152# On-board memory (optional) 153# See frame-buffers 154obmem0 at mainbus? 155 156# VME bus support (optional) 157# One unit for each address space 158vme0 at mainbus? # A16/D16 159vme1 at mainbus? # A16/D32 160vme2 at mainbus? # A24/D16 161vme3 at mainbus? # A24/D32 162vme4 at mainbus? # A32/D16 163vme5 at mainbus? # A32/D32 164 165# 166# Serial ports 167# 168zstty0 at zsc1 channel 0 # ttya 169zstty1 at zsc1 channel 1 # ttyb 170 171kbd0 at zsc0 channel 0 # keyboard 172ms0 at zsc0 channel 1 # mouse 173 174# 175# Network devices 176# 177 178# Intel Ethernet (onboard, or VME) 179ie0 at obio0 addr 0x0C0000 ipl 3 180ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 181 182# Lance Ethernet (only onboard) 183le0 at obio0 addr 0x120000 ipl 3 184 185# All Sun3 machines with an "le" (3/50, 3/60) should be 186# presumed to have the old, buggy LANCE chip. (Rev. C) 187options LANCE_REVC_BUG 188 189# 190# Disk and tape devices 191# 192 193# Sun3 "si" SCSI controller (NCR 5380) 194# This driver has several flags which may be enabled using 195# the "flags" directive. Valid flags are: 196# 197# 0x000ff Set (1<<target) to disable disconnect/reselect 198# 0x0ff00 Set (1<<(target+8)) to disable parity checking 199# 0x10000 Set this bit to disable DMA interrupts (poll) 200# 0x20000 Set this bit to disable DMA entirely (use PIO) 201# 202# For example: "flags 0x1000f" would disable DMA interrupts, 203# and disable disconnect/reselect for targets 0-3 204si0 at obio0 addr 0x140000 ipl 2 205si0 at vme2 addr 0x200000 ipl 2 vect 0x40 206si1 at vme2 addr 0x204000 ipl 2 vect 0x41 207 208# Xylogics 450/451 controllers (VME A16/D16) 209xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 210xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 211xy* at xyc? drive ? 212 213# Xylogics 7053 controllers (VME A16/D32) 214xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 215xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 216xd* at xdc? drive ? 217 218# Xylogics 472 tape controllers? 219 220# Sun3/E SCSI+Ethernet board (VME A24/D16) 221# Note: the board uses vect and vect+1 222sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75 223sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77 224si* at sebuf? 225ie* at sebuf? 226 227# 228# Frame buffer devices 229# 230 231include "arch/sun3/conf/bw2.sun3" 232include "arch/sun3/conf/cg4.sun3" 233 234# 3/60 P4 accelerated 8-bit color frame buffer 235# cgsix0 at obmem0 addr 0xff000000 236 237# 3/60 P4 24-bit color frame buffer 238# cgeight0 at obmem0 addr 0xff300000 239 240# Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16). 241cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8 242 243# Support for the CG9 24-bit frame buffer (VME A32/D32). 244# cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA 245 246# 247# SCSI infrastructure 248# 249scsibus* at scsi? 250 251sd* at scsibus? target ? lun ? # SCSI disks 252st* at scsibus? target ? lun ? # SCSI tapes 253cd* at scsibus? target ? lun ? # SCSI CD-ROMs 254#ch* at scsibus? target ? lun ? # SCSI changer devices 255#ss* at scsibus? target ? lun ? # SCSI scanners 256uk* at scsibus? target ? lun ? # unknown SCSI devices 257 258# 259# accept filters 260pseudo-device accf_data # "dataready" accept filter 261pseudo-device accf_http # "httpready" accept filter 262 263# Memory-disk drivers 264pseudo-device md 265 266# Misc. 267pseudo-device loop 1 # network loopback 268pseudo-device bpfilter # packet filter 269#pseudo-device carp # Common Address Redundancy Protocol 270pseudo-device sl # CSLIP 271pseudo-device ppp # PPP 272#pseudo-device pppoe # PPP over Ethernet (RFC 2516) 273#pseudo-device tun # network tunneling over tty 274#pseudo-device tap # virtual Ethernet 275#pseudo-device gre # generic L3 over IP tunnel 276#pseudo-device ipfilter # ip filter 277#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 278#pseudo-device faith # IPv[46] tcp relay translation i/f 279#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 280pseudo-device vlan # IEEE 802.1q encapsulation 281#pseudo-device bridge # simple inter-network bridging 282#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 283#pseudo-device agr # IEEE 802.3ad link aggregation 284 285pseudo-device pty # pseudo-terminals 286pseudo-device vnd # paging to files 287#options VND_COMPRESSION # compressed vnd(4) 288#pseudo-device ccd 4 # concatenated disks 289#pseudo-device cgd 4 # cryptographic disk devices 290#pseudo-device raid 4 # RAIDframe disk driver 291#options RAID_AUTOCONFIG # auto-configuration of RAID components 292# Options to enable various other RAIDframe RAID types. 293#options RF_INCLUDE_EVENODD=1 294#options RF_INCLUDE_RAID5_RS=1 295#options RF_INCLUDE_PARITYLOGGING=1 296#options RF_INCLUDE_CHAINDECLUSTER=1 297#options RF_INCLUDE_INTERDECLUSTER=1 298#options RF_INCLUDE_PARITY_DECLUSTERING=1 299#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 300#pseudo-device fss # file system snapshot device 301pseudo-device clockctl # user control of clock subsystem 302pseudo-device ksyms # /dev/ksyms 303#pseudo-device pf # PF packet filter 304#pseudo-device pflog # PF log if 305 306# Veriexec 307# 308# a pseudo device needed for veriexec 309#pseudo-device veriexec 1 310# 311# Uncomment the fingerprint methods below that are desired. Note that 312# removing fingerprint methods will have almost no impact on the kernel 313# code size. 314# 315#options VERIFIED_EXEC_FP_RMD160 316#options VERIFIED_EXEC_FP_SHA256 317#options VERIFIED_EXEC_FP_SHA384 318#options VERIFIED_EXEC_FP_SHA512 319#options VERIFIED_EXEC_FP_SHA1 320#options VERIFIED_EXEC_FP_MD5 321