GENERIC revision 1.157
1# $NetBSD: GENERIC,v 1.157 2011/11/22 21:25:39 tls Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21# Supports Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E) 22# Supports root on: ie0, le0, sd*, ... 23 24include "arch/sun3/conf/std.sun3" 25 26options INCLUDE_CONFIG_FILE # embed config file in kernel binary 27 28#ident "GENERIC-$Revision: 1.157 $" 29 30makeoptions COPTS="-Os" # bootloader has size limit (~2MB) 31 32# Machines to be supported by this kernel 33options FPU_EMULATE 34options HAVECACHE # Sun3/260 VAC 35 36# Needs to be set per system. i.e change these as you see fit 37maxusers 4 38 39# Standard system options 40options KTRACE # system call tracing 41options SYSVMSG # System V message queues 42options SYSVSEM # System V semaphores 43options SYSVSHM # System V shared memory 44options P1003_1B_SEMAPHORE # p1003.1b semaphore support 45 46#options MODULAR # new style module(7) framework 47 48#options INSECURE # disable kernel security level 49#options USERCONF # userconf(4) support 50#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 51options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 52 53# Enable experimental buffer queue strategy for better responsiveness under 54# high disk I/O load. Use it with caution - it's not proven to be stable yet. 55#options BUFQ_READPRIO 56#options BUFQ_PRIOCSCAN 57 58# Which kernel debugger? Uncomment either this: 59options DDB 60# ... or these for KGDB (gdb remote target) 61#makeoptions DEBUG="-g" # debugging symbols for gdb 62#options KGDB 63#options KGDB_DEV=0x0C01 # ttya=0C00 ttyb=0C01 64 65# Other debugging options 66options DDB_HISTORY_SIZE=512 # enable history editing in DDB 67#options DEBUG # kernel debugging code 68#options DIAGNOSTIC # extra kernel sanity checking 69#options KMEMSTATS # kernel memory statistics (vmstat -m) 70#options PMAP_DEBUG 71#options SCSIDEBUG 72#options SCSIVERBOSE # Verbose SCSI errors 73 74# Compatibility options 75options COMPAT_SUNOS # can run SunOS 4.1.1 executables 76#options COMPAT_SVR4 # can run SVR4 executables 77options COMPAT_43 # and 4.3BSD and ... 78options COMPAT_10 # NetBSD 1.0 79options COMPAT_11 # NetBSD 1.1 80options COMPAT_12 # NetBSD 1.2 81options COMPAT_13 # NetBSD 1.3 82options COMPAT_14 # NetBSD 1.4 83options COMPAT_15 # NetBSD 1.5 84options COMPAT_16 # NetBSD 1.6 85options COMPAT_20 # NetBSD 2.0 86options COMPAT_30 # NetBSD 3.0 87options COMPAT_40 # NetBSD 4.0 88options COMPAT_50 # NetBSD 5.0 compatibility. 89options COMPAT_AOUT_M68K # support for NetBSD a.out executables 90#options COMPAT_LINUX # can run Linux/m68k executables 91options EXEC_AOUT # support for a.out executables 92#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 93options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 94 95# Filesystem options 96file-system FFS # Berkeley Fast Filesystem 97file-system NFS # Sun NFS client support 98file-system CD9660 # ISO 9660 + Rock Ridge file system 99file-system FDESC # /dev/fd/* 100file-system KERNFS # /kern 101file-system NULLFS # loopback file system 102#file-system OVERLAY # overlay file system 103file-system PROCFS # /proc 104#file-system UNION # union file system 105file-system MFS # memory-based filesystem 106file-system PTYFS # /dev/pts/N support 107file-system TMPFS # Efficient memory file-system 108#file-system UDF # experimental - OSTA UDF CD/DVD file-system 109 110options NFSSERVER # nfs server support 111#options QUOTA # legacy UFS quotas 112#options QUOTA2 # new, in-filesystem UFS quotas 113#options FFS_EI # FFS Endian Independent support 114options WAPBL # File system journaling support - Experimental 115#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 116options FFS_NO_SNAPSHOT # No FFS snapshot support 117 118# Networking options 119options INET # IP protocol stack support 120options INET6 # IPV6 121#options IPSEC # IP security 122#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 123#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 124#options IPSEC_DEBUG # debug for IP security 125#options GATEWAY # IP packet forwarding 126#options ISO,TPIP # OSI networking 127#options EON # OSI tunneling over IP 128options PFIL_HOOKS # pfil(9) packet filter hooks. 129#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 130 131#options ALTQ # Manipulate network interfaces' output queues 132#options ALTQ_BLUE # Stochastic Fair Blue 133#options ALTQ_CBQ # Class-Based Queueing 134#options ALTQ_CDNR # Diffserv Traffic Conditioner 135#options ALTQ_FIFOQ # First-In First-Out Queue 136#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 137#options ALTQ_HFSC # Hierarchical Fair Service Curve 138#options ALTQ_LOCALQ # Local queueing discipline 139#options ALTQ_PRIQ # Priority Queueing 140#options ALTQ_RED # Random Early Detection 141#options ALTQ_RIO # RED with IN/OUT 142#options ALTQ_WFQ # Weighted Fair Queueing 143 144# Work-around for root on slow servers (insurance...) 145options NFS_BOOT_RWSIZE=1024 146options NFS_BOOT_BOOTPARAM 147 148config netbsd root on ? type ? 149 150# On-board I/O space (required) 151include "arch/sun3/conf/obio.sun3" 152 153# On-board memory (optional) 154# See frame-buffers 155obmem0 at mainbus? 156 157# VME bus support (optional) 158# One unit for each address space 159vme0 at mainbus? # A16/D16 160vme1 at mainbus? # A16/D32 161vme2 at mainbus? # A24/D16 162vme3 at mainbus? # A24/D32 163vme4 at mainbus? # A32/D16 164vme5 at mainbus? # A32/D32 165 166# 167# Serial ports 168# 169zstty0 at zsc1 channel 0 # ttya 170zstty1 at zsc1 channel 1 # ttyb 171 172kbd0 at zsc0 channel 0 # keyboard 173ms0 at zsc0 channel 1 # mouse 174 175# 176# Network devices 177# 178 179# Intel Ethernet (onboard, or VME) 180ie0 at obio0 addr 0x0C0000 ipl 3 181ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 182 183# Lance Ethernet (only onboard) 184le0 at obio0 addr 0x120000 ipl 3 185 186# All Sun3 machines with an "le" (3/50, 3/60) should be 187# presumed to have the old, buggy LANCE chip. (Rev. C) 188options LANCE_REVC_BUG 189 190# 191# Disk and tape devices 192# 193 194# Sun3 "si" SCSI controller (NCR 5380) 195# This driver has several flags which may be enabled using 196# the "flags" directive. Valid flags are: 197# 198# 0x000ff Set (1<<target) to disable disconnect/reselect 199# 0x0ff00 Set (1<<(target+8)) to disable parity checking 200# 0x10000 Set this bit to disable DMA interrupts (poll) 201# 0x20000 Set this bit to disable DMA entirely (use PIO) 202# 203# For example: "flags 0x1000f" would disable DMA interrupts, 204# and disable disconnect/reselect for targets 0-3 205si0 at obio0 addr 0x140000 ipl 2 206si0 at vme2 addr 0x200000 ipl 2 vect 0x40 207si1 at vme2 addr 0x204000 ipl 2 vect 0x41 208 209# Xylogics 450/451 controllers (VME A16/D16) 210xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 211xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 212xy* at xyc? drive ? 213 214# Xylogics 7053 controllers (VME A16/D32) 215xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 216xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 217xd* at xdc? drive ? 218 219# Xylogics 472 tape controllers? 220 221# Sun3/E SCSI+Ethernet board (VME A24/D16) 222# Note: the board uses vect and vect+1 223sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75 224sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77 225si* at sebuf? 226ie* at sebuf? 227 228# 229# Frame buffer devices 230# 231 232include "arch/sun3/conf/bw2.sun3" 233include "arch/sun3/conf/cg4.sun3" 234 235# 3/60 P4 accelerated 8-bit color frame buffer 236# cgsix0 at obmem0 addr 0xff000000 237 238# 3/60 P4 24-bit color frame buffer 239# cgeight0 at obmem0 addr 0xff300000 240 241# Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16). 242cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8 243 244# Support for the CG9 24-bit frame buffer (VME A32/D32). 245# cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA 246 247# 248# SCSI infrastructure 249# 250scsibus* at scsi? 251 252sd* at scsibus? target ? lun ? # SCSI disks 253st* at scsibus? target ? lun ? # SCSI tapes 254cd* at scsibus? target ? lun ? # SCSI CD-ROMs 255#ch* at scsibus? target ? lun ? # SCSI changer devices 256#ss* at scsibus? target ? lun ? # SCSI scanners 257uk* at scsibus? target ? lun ? # unknown SCSI devices 258 259# 260# accept filters 261pseudo-device accf_data # "dataready" accept filter 262pseudo-device accf_http # "httpready" accept filter 263 264# Memory-disk drivers 265pseudo-device md 266 267# Misc. 268pseudo-device loop 1 # network loopback 269pseudo-device bpfilter # packet filter 270#pseudo-device carp # Common Address Redundancy Protocol 271pseudo-device sl # CSLIP 272pseudo-device ppp # PPP 273#pseudo-device pppoe # PPP over Ethernet (RFC 2516) 274#pseudo-device tun # network tunneling over tty 275#pseudo-device tap # virtual Ethernet 276#pseudo-device gre # generic L3 over IP tunnel 277#pseudo-device ipfilter # ip filter 278#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 279#pseudo-device faith # IPv[46] tcp relay translation i/f 280#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 281pseudo-device vlan # IEEE 802.1q encapsulation 282#pseudo-device bridge # simple inter-network bridging 283#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 284#pseudo-device agr # IEEE 802.3ad link aggregation 285 286pseudo-device pty # pseudo-terminals 287pseudo-device vnd # paging to files 288#options VND_COMPRESSION # compressed vnd(4) 289#pseudo-device ccd 4 # concatenated disks 290#pseudo-device cgd 4 # cryptographic disk devices 291#pseudo-device raid 4 # RAIDframe disk driver 292#options RAID_AUTOCONFIG # auto-configuration of RAID components 293# Options to enable various other RAIDframe RAID types. 294#options RF_INCLUDE_EVENODD=1 295#options RF_INCLUDE_RAID5_RS=1 296#options RF_INCLUDE_PARITYLOGGING=1 297#options RF_INCLUDE_CHAINDECLUSTER=1 298#options RF_INCLUDE_INTERDECLUSTER=1 299#options RF_INCLUDE_PARITY_DECLUSTERING=1 300#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 301#pseudo-device fss # file system snapshot device 302pseudo-device clockctl # user control of clock subsystem 303pseudo-device ksyms # /dev/ksyms 304#pseudo-device pf # PF packet filter 305#pseudo-device pflog # PF log if 306 307# Veriexec 308# 309# a pseudo device needed for veriexec 310#pseudo-device veriexec 1 311# 312# Uncomment the fingerprint methods below that are desired. Note that 313# removing fingerprint methods will have almost no impact on the kernel 314# code size. 315# 316#options VERIFIED_EXEC_FP_RMD160 317#options VERIFIED_EXEC_FP_SHA256 318#options VERIFIED_EXEC_FP_SHA384 319#options VERIFIED_EXEC_FP_SHA512 320#options VERIFIED_EXEC_FP_SHA1 321#options VERIFIED_EXEC_FP_MD5 322