GENERIC revision 1.136
1# $NetBSD: GENERIC,v 1.136 2006/09/27 21:42:06 manu Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21# Supports Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E) 22# Supports root on: ie0, le0, sd*, ... 23 24include "arch/sun3/conf/std.sun3" 25 26options INCLUDE_CONFIG_FILE # embed config file in kernel binary 27 28#ident "GENERIC-$Revision: 1.136 $" 29 30# Machines to be supported by this kernel 31options FPU_EMULATE 32options HAVECACHE # Sun3/260 VAC 33 34# Needs to be set per system. i.e change these as you see fit 35maxusers 4 36 37# Standard system options 38options KTRACE # system call tracing 39#options SYSTRACE # system call vetting via systrace(1) 40options SYSVMSG # System V message queues 41options SYSVSEM # System V semaphores 42#options SEMMNI=10 # number of semaphore identifiers 43#options SEMMNS=60 # number of semaphores in system 44#options SEMUME=10 # max number of undo entries per process 45#options SEMMNU=30 # number of undo structures in system 46options SYSVSHM # System V shared memory 47#options SHMMAXPGS=1024 # 1024 pages is the default 48options P1003_1B_SEMAPHORE # p1003.1b semaphore support 49options LKM # loadable kernel modules 50#options INSECURE # disable kernel security level 51options USERCONF # userconf(4) support 52#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 53options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 54 55# Enable experimental buffer queue strategy for better responsiveness under 56# high disk I/O load. Use it with caution - it's not proven to be stable yet. 57#options BUFQ_READPRIO 58#options BUFQ_PRIOCSCAN 59 60# Which kernel debugger? Uncomment either this: 61options DDB 62# ... or these for KGDB (gdb remote target) 63#makeoptions DEBUG="-g" # debugging symbols for gdb 64#options KGDB 65#options KGDB_DEV=0x0C01 # ttya=0C00 ttyb=0C01 66 67# Other debugging options 68#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 69#options DEBUG # kernel debugging code 70#options DIAGNOSTIC # extra kernel sanity checking 71#options KMEMSTATS # kernel memory statistics (vmstat -m) 72#options PMAP_DEBUG 73#options SCSIDEBUG 74#options SCSIVERBOSE # Verbose SCSI errors 75 76# Compatibility options 77options COMPAT_SUNOS # can run SunOS 4.1.1 executables 78#options COMPAT_SVR4 # can run SVR4 executables 79options COMPAT_43 # and 4.3BSD and ... 80options COMPAT_10 # NetBSD 1.0 81options COMPAT_11 # NetBSD 1.1 82options COMPAT_12 # NetBSD 1.2 83options COMPAT_13 # NetBSD 1.3 84options COMPAT_14 # NetBSD 1.4 85options COMPAT_15 # NetBSD 1.5 86options COMPAT_16 # NetBSD 1.6 87options COMPAT_20 # NetBSD 2.0 88options COMPAT_30 # NetBSD 3.0 compatibility. 89options COMPAT_AOUT_M68K # support for NetBSD a.out executables 90#options COMPAT_LINUX # can run Linux/m68k executables 91options EXEC_AOUT # support for a.out executables 92#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 93options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 94 95# Filesystem options 96file-system FFS # Berkeley Fast Filesystem 97file-system NFS # Sun NFS client support 98file-system CD9660 # ISO 9660 + Rock Ridge file system 99file-system FDESC # /dev/fd/* 100file-system KERNFS # /kern 101file-system NULLFS # loopback file system 102file-system OVERLAY # overlay file system 103file-system PROCFS # /proc 104file-system UNION # union file system 105file-system MFS # memory-based filesystem 106file-system PTYFS # /dev/pts/N support 107#file-system TMPFS # experimental - Efficient memory file-system 108#file-system UDF # experimental - OSTA UDF CD/DVD file-system 109 110options NFSSERVER # nfs server support 111options QUOTA # FFS quotas 112#options FFS_EI # FFS Endian Independant support 113options SOFTDEP # FFS soft updates support. 114#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 115#options FFS_NO_SNAPSHOT # No FFS snapshot support 116 117# Networking options 118options INET # IP protocol stack support 119options INET6 # IPV6 120#options IPSEC # IP security 121#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 122#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 123#options IPSEC_DEBUG # debug for IP security 124#options GATEWAY # IP packet forwarding 125#options ISO,TPIP # OSI networking 126#options EON # OSI tunneling over IP 127options PFIL_HOOKS # pfil(9) packet filter hooks. 128#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 129 130#options ALTQ # Manipulate network interfaces' output queues 131#options ALTQ_BLUE # Stochastic Fair Blue 132#options ALTQ_CBQ # Class-Based Queueing 133#options ALTQ_CDNR # Diffserv Traffic Conditioner 134#options ALTQ_FIFOQ # First-In First-Out Queue 135#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 136#options ALTQ_HFSC # Hierarchical Fair Service Curve 137#options ALTQ_LOCALQ # Local queueing discipline 138#options ALTQ_PRIQ # Priority Queueing 139#options ALTQ_RED # Random Early Detection 140#options ALTQ_RIO # RED with IN/OUT 141#options ALTQ_WFQ # Weighted Fair Queueing 142 143# Work-around for root on slow servers (insurance...) 144options NFS_BOOT_RWSIZE=1024 145options NFS_BOOT_BOOTPARAM 146 147config netbsd root on ? type ? 148 149# On-board I/O space (required) 150include "arch/sun3/conf/obio.sun3" 151 152# On-board memory (optional) 153# See frame-buffers 154obmem0 at mainbus? 155 156# VME bus support (optional) 157# One unit for each address space 158vme0 at mainbus? # A16/D16 159vme1 at mainbus? # A16/D32 160vme2 at mainbus? # A24/D16 161vme3 at mainbus? # A24/D32 162vme4 at mainbus? # A32/D16 163vme5 at mainbus? # A32/D32 164 165# 166# Serial ports 167# 168zstty0 at zsc1 channel 0 # ttya 169zstty1 at zsc1 channel 1 # ttyb 170 171kbd0 at zsc0 channel 0 # keyboard 172ms0 at zsc0 channel 1 # mouse 173 174# 175# Network devices 176# 177 178# Intel Ethernet (onboard, or VME) 179ie0 at obio0 addr 0x0C0000 ipl 3 180ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 181 182# Lance Ethernet (only onboard) 183le0 at obio0 addr 0x120000 ipl 3 184 185# All Sun3 machines with an "le" (3/50, 3/60) should be 186# presumed to have the old, buggy LANCE chip. (Rev. C) 187options LANCE_REVC_BUG 188 189# 190# Disk and tape devices 191# 192 193# Sun3 "si" SCSI controller (NCR 5380) 194# This driver has several flags which may be enabled using 195# the "flags" directive. Valid flags are: 196# 197# 0x000ff Set (1<<target) to disable disconnect/reselect 198# 0x0ff00 Set (1<<(target+8)) to disable parity checking 199# 0x10000 Set this bit to disable DMA interrupts (poll) 200# 0x20000 Set this bit to disable DMA entirely (use PIO) 201# 202# For example: "flags 0x1000f" would disable DMA interrupts, 203# and disable disconnect/reselect for targets 0-3 204si0 at obio0 addr 0x140000 ipl 2 205si0 at vme2 addr 0x200000 ipl 2 vect 0x40 206si1 at vme2 addr 0x204000 ipl 2 vect 0x41 207 208# Xylogics 450/451 controllers (VME A16/D16) 209xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 210xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 211xy* at xyc? drive ? 212 213# Xylogics 7053 controllers (VME A16/D32) 214xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 215xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 216xd* at xdc? drive ? 217 218# Xylogics 472 tape controllers? 219 220# Sun3/E SCSI+Ethernet board (VME A24/D16) 221# Note: the board uses vect and vect+1 222sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75 223sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77 224si* at sebuf? 225ie* at sebuf? 226 227# 228# Frame buffer devices 229# 230 231include "arch/sun3/conf/bw2.sun3" 232include "arch/sun3/conf/cg4.sun3" 233 234# 3/60 P4 accelerated 8-bit color frame buffer 235# cgsix0 at obmem0 addr 0xff000000 236 237# 3/60 P4 24-bit color frame buffer 238# cgeight0 at obmem0 addr 0xff300000 239 240# Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16). 241cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8 242 243# Support for the CG9 24-bit frame buffer (VME A32/D32). 244# cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA 245 246# 247# SCSI infrastructure 248# 249scsibus* at scsi? 250 251sd* at scsibus? target ? lun ? # SCSI disks 252st* at scsibus? target ? lun ? # SCSI tapes 253cd* at scsibus? target ? lun ? # SCSI CD-ROMs 254ch* at scsibus? target ? lun ? # SCSI changer devices 255ss* at scsibus? target ? lun ? # SCSI scanners 256uk* at scsibus? target ? lun ? # unknown SCSI devices 257 258# Memory-disk drivers 259pseudo-device md 2 260 261# Misc. 262pseudo-device loop 1 # network loopback 263pseudo-device bpfilter # packet filter 264#pseudo-device carp # Common Address Redundancy Protocol 265pseudo-device sl # CSLIP 266pseudo-device ppp # PPP 267pseudo-device pppoe # PPP over Ethernet (RFC 2516) 268pseudo-device tun # network tunneling over tty 269pseudo-device tap # virtual Ethernet 270#pseudo-device gre # generic L3 over IP tunnel 271#pseudo-device ipfilter # ip filter 272pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 273#pseudo-device faith # IPv[46] tcp relay translation i/f 274pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 275pseudo-device vlan # IEEE 802.1q encapsulation 276pseudo-device bridge # simple inter-network bridging 277#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 278pseudo-device rnd # /dev/random and in-kernel generator 279 280pseudo-device pty # pseudo-terminals 281pseudo-device vnd # paging to files 282#options VND_COMPRESSION # compressed vnd(4) 283#pseudo-device ccd 4 # concatenated disks 284#pseudo-device cgd 4 # cryptographic disk devices 285#pseudo-device raid 4 # RAIDframe disk driver 286#options RAID_AUTOCONFIG # auto-configuration of RAID components 287# Options to enable various other RAIDframe RAID types. 288# options RF_INCLUDE_EVENODD=1 289# options RF_INCLUDE_RAID5_RS=1 290# options RF_INCLUDE_PARITYLOGGING=1 291# options RF_INCLUDE_CHAINDECLUSTER=1 292# options RF_INCLUDE_INTERDECLUSTER=1 293# options RF_INCLUDE_PARITY_DECLUSTERING=1 294# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 295pseudo-device fss 4 # file system snapshot device 296pseudo-device clockctl # user control of clock subsystem 297pseudo-device ksyms # /dev/ksyms 298#pseudo-device pf # PF packet filter 299#pseudo-device pflog # PF log if 300 301# Veriexec 302# 303# a pseudo device needed for veriexec 304#pseudo-device veriexec 1 305# 306# Uncomment the fingerprint methods below that are desired. Note that 307# removing fingerprint methods will have almost no impact on the kernel 308# code size. 309# 310#options VERIFIED_EXEC_FP_RMD160 311#options VERIFIED_EXEC_FP_SHA256 312#options VERIFIED_EXEC_FP_SHA384 313#options VERIFIED_EXEC_FP_SHA512 314#options VERIFIED_EXEC_FP_SHA1 315#options VERIFIED_EXEC_FP_MD5 316