GENERIC revision 1.120
1# $NetBSD: GENERIC,v 1.120 2005/07/31 04:04:46 yamt Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21# Supports Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E) 22# Supports root on: ie0, le0, sd*, ... 23 24include "arch/sun3/conf/std.sun3" 25 26options INCLUDE_CONFIG_FILE # embed config file in kernel binary 27 28#ident "GENERIC-$Revision: 1.120 $" 29 30# Machines to be supported by this kernel 31options FPU_EMULATE 32options HAVECACHE # Sun3/260 VAC 33 34# Needs to be set per system. i.e change these as you see fit 35maxusers 4 36 37# Standard system options 38options KTRACE # system call tracing 39options SYSTRACE # system call vetting via systrace(1) 40options SYSVMSG # System V message queues 41options SYSVSEM # System V semaphores 42#options SEMMNI=10 # number of semaphore identifiers 43#options SEMMNS=60 # number of semaphores in system 44#options SEMUME=10 # max number of undo entries per process 45#options SEMMNU=30 # number of undo structures in system 46options SYSVSHM # System V shared memory 47#options SHMMAXPGS=1024 # 1024 pages is the default 48options P1003_1B_SEMAPHORE # p1003.1b semaphore support 49options LKM # loadable kernel modules 50#options INSECURE # disable kernel security level 51options USERCONF # userconf(4) support 52#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 53options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 54 55# Enable experimental buffer queue strategy for better responsiveness under 56# high disk I/O load. Use it with caution - it's not proven to be stable yet. 57#options BUFQ_READPRIO 58#options BUFQ_PRIOCSCAN 59 60# Which kernel debugger? Uncomment either this: 61options DDB 62# ... or these for KGDB (gdb remote target) 63#makeoptions DEBUG="-g" # debugging symbols for gdb 64#options KGDB 65#options KGDB_DEV=0x0C01 # ttya=0C00 ttyb=0C01 66 67# Other debugging options 68#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 69#options DEBUG # kernel debugging code 70#options DIAGNOSTIC # extra kernel sanity checking 71#options KMEMSTATS # kernel memory statistics (vmstat -m) 72#options PMAP_DEBUG 73#options SCSIDEBUG 74#options SCSIVERBOSE # Verbose SCSI errors 75 76# Compatibility options 77options COMPAT_SUNOS # can run SunOS 4.1.1 executables 78#options COMPAT_SVR4 # can run SVR4 executables 79options COMPAT_43 # and 4.3BSD and ... 80options COMPAT_10 # NetBSD 1.0 81options COMPAT_11 # NetBSD 1.1 82options COMPAT_12 # NetBSD 1.2 83options COMPAT_13 # NetBSD 1.3 84options COMPAT_14 # NetBSD 1.4 85options COMPAT_16 # NetBSD 1.6 86options COMPAT_20 # NetBSD 2.0 87options COMPAT_AOUT_M68K # support for NetBSD a.out executables 88#options COMPAT_LINUX # can run Linux/m68k executables 89options EXEC_AOUT # support for a.out executables 90#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 91options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 92 93# Filesystem options 94file-system FFS # Berkeley Fast Filesystem 95file-system NFS # Sun NFS client support 96file-system CD9660 # ISO 9660 + Rock Ridge file system 97file-system FDESC # /dev/fd/* 98file-system KERNFS # /kern 99file-system NULLFS # loopback file system 100file-system OVERLAY # overlay file system 101file-system PROCFS # /proc 102file-system UNION # union file system 103file-system MFS # memory-based filesystem 104#file-system PTYFS # experimental - /dev/ptm support 105 106options NFSSERVER # nfs server support 107options QUOTA # FFS quotas 108#options FFS_EI # FFS Endian Independant support 109options SOFTDEP # FFS soft updates support. 110#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 111#options FFS_NO_SNAPSHOT # ffs snapshots 112 113# Networking options 114options INET # IP prototol stack support 115options INET6 # IPV6 116#options IPSEC # IP security 117#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 118#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 119#options IPSEC_DEBUG # debug for IP security 120#options GATEWAY # IP packet forwarding 121#options ISO,TPIP # OSI networking 122#options EON # OSI tunneling over IP 123#options CCITT,LLC,HDLC # X.25 124options PFIL_HOOKS # pfil(9) packet filter hooks. 125#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 126 127#options ALTQ # Manipulate network interfaces' output queues 128#options ALTQ_BLUE # Stochastic Fair Blue 129#options ALTQ_CBQ # Class-Based Queueing 130#options ALTQ_CDNR # Diffserv Traffic Conditioner 131#options ALTQ_FIFOQ # First-In First-Out Queue 132#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 133#options ALTQ_HFSC # Hierarchical Fair Service Curve 134#options ALTQ_LOCALQ # Local queueing discipline 135#options ALTQ_PRIQ # Priority Queueing 136#options ALTQ_RED # Random Early Detection 137#options ALTQ_RIO # RED with IN/OUT 138#options ALTQ_WFQ # Weighted Fair Queueing 139 140# Work-around for root on slow servers (insurance...) 141options NFS_BOOT_RWSIZE=1024 142options NFS_BOOT_BOOTPARAM 143 144config netbsd root on ? type ? 145 146# On-board I/O space (required) 147include "arch/sun3/conf/obio.sun3" 148 149# On-board memory (optional) 150# See frame-buffers 151obmem0 at mainbus? 152 153# VME bus support (optional) 154# One unit for each address space 155vme0 at mainbus? # A16/D16 156vme1 at mainbus? # A16/D32 157vme2 at mainbus? # A24/D16 158vme3 at mainbus? # A24/D32 159vme4 at mainbus? # A32/D16 160vme5 at mainbus? # A32/D32 161 162# 163# Serial ports 164# 165zstty0 at zsc1 channel 0 # ttya 166zstty1 at zsc1 channel 1 # ttyb 167 168kbd0 at zsc0 channel 0 # keyboard 169ms0 at zsc0 channel 1 # mouse 170 171# 172# Network devices 173# 174 175# Intel Ethernet (onboard, or VME) 176ie0 at obio0 addr 0x0C0000 ipl 3 177ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 178 179# Lance Ethernet (only onboard) 180le0 at obio0 addr 0x120000 ipl 3 181 182# All Sun3 machines with an "le" (3/50, 3/60) should be 183# presumed to have the old, buggy LANCE chip. (Rev. C) 184options LANCE_REVC_BUG 185 186# 187# Disk and tape devices 188# 189 190# Sun3 "si" SCSI controller (NCR 5380) 191# This driver has several flags which may be enabled using 192# the "flags" directive. Valid flags are: 193# 194# 0x000ff Set (1<<target) to disable disconnect/reselect 195# 0x0ff00 Set (1<<(target+8)) to disable parity checking 196# 0x10000 Set this bit to disable DMA interrupts (poll) 197# 0x20000 Set this bit to disable DMA entirely (use PIO) 198# 199# For example: "flags 0x1000f" would disable DMA interrupts, 200# and disable disconnect/reselect for targets 0-3 201si0 at obio0 addr 0x140000 ipl 2 202si0 at vme2 addr 0x200000 ipl 2 vect 0x40 203si1 at vme2 addr 0x204000 ipl 2 vect 0x41 204 205# Xylogics 450/451 controllers (VME A16/D16) 206xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 207xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 208xy* at xyc? drive ? 209 210# Xylogics 7053 controllers (VME A16/D32) 211xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 212xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 213xd* at xdc? drive ? 214 215# Xylogics 472 tape controllers? 216 217# Sun3/E SCSI+Ethernet board (VME A24/D16) 218# Note: the board uses vect and vect+1 219sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75 220sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77 221si* at sebuf? 222ie* at sebuf? 223 224# 225# Frame buffer devices 226# 227 228include "arch/sun3/conf/bw2.sun3" 229include "arch/sun3/conf/cg4.sun3" 230 231# 3/60 P4 accelerated 8-bit color frame buffer 232# cgsix0 at obmem0 addr 0xff000000 233 234# 3/60 P4 24-bit color frame buffer 235# cgeight0 at obmem0 addr 0xff300000 236 237# Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16). 238cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8 239 240# Support for the CG9 24-bit frame buffer (VME A32/D32). 241# cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA 242 243# 244# SCSI infrastructure 245# 246scsibus* at scsi? 247 248sd* at scsibus? target ? lun ? # SCSI disks 249st* at scsibus? target ? lun ? # SCSI tapes 250cd* at scsibus? target ? lun ? # SCSI CD-ROMs 251ch* at scsibus? target ? lun ? # SCSI changer devices 252ss* at scsibus? target ? lun ? # SCSI scanners 253uk* at scsibus? target ? lun ? # unknown SCSI devices 254 255# Memory-disk drivers 256pseudo-device md 2 257 258# Misc. 259pseudo-device loop 1 # network loopback 260pseudo-device bpfilter 8 # packet filter 261pseudo-device sl 2 # CSLIP 262pseudo-device ppp 2 # PPP 263pseudo-device pppoe # PPP over Ethernet (RFC 2516) 264pseudo-device tun 2 # network tunneling over tty 265pseudo-device tap # virtual Ethernet 266#pseudo-device gre 2 # generic L3 over IP tunnel 267#pseudo-device ipfilter # ip filter 268pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 269#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 270#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 271pseudo-device vlan # IEEE 802.1q encapsulation 272pseudo-device bridge # simple inter-network bridging 273#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 274pseudo-device rnd # /dev/random and in-kernel generator 275 276pseudo-device pty # pseudo-terminals 277pseudo-device vnd 4 # paging to files 278#options VND_COMPRESSION # compressed vnd(4) 279#pseudo-device ccd 4 # concatenated disks 280#pseudo-device cgd 4 # cryptographic disk devices 281#pseudo-device raid 4 # RAIDframe disk driver 282#options RAID_AUTOCONFIG # auto-configuration of RAID components 283# Options to enable various other RAIDframe RAID types. 284# options RF_INCLUDE_EVENODD=1 285# options RF_INCLUDE_RAID5_RS=1 286# options RF_INCLUDE_PARITYLOGGING=1 287# options RF_INCLUDE_CHAINDECLUSTER=1 288# options RF_INCLUDE_INTERDECLUSTER=1 289# options RF_INCLUDE_PARITY_DECLUSTERING=1 290# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 291pseudo-device fss 4 # file system snapshot device 292pseudo-device clockctl # user control of clock subsystem 293pseudo-device ksyms # /dev/ksyms 294#pseudo-device pf # PF packet filter 295#pseudo-device pflog # PF log if 296