GENERIC revision 1.102
1# $NetBSD: GENERIC,v 1.102 2004/06/16 15:07:42 christos Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21# Supports Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E) 22# Supports root on: ie0, le0, sd*, ... 23 24include "arch/sun3/conf/std.sun3" 25 26options INCLUDE_CONFIG_FILE # embed config file in kernel binary 27 28#ident "GENERIC-$Revision: 1.102 $" 29 30# Machines to be supported by this kernel 31options FPU_EMULATE 32options HAVECACHE # Sun3/260 VAC 33 34# Needs to be set per system. i.e change these as you see fit 35maxusers 4 36 37# Standard system options 38options KTRACE # system call tracing 39options SYSTRACE # system call vetting via systrace(1) 40options SYSVMSG # System V message queues 41options SYSVSEM # System V semaphores 42#options SEMMNI=10 # number of semaphore identifiers 43#options SEMMNS=60 # number of semaphores in system 44#options SEMUME=10 # max number of undo entries per process 45#options SEMMNU=30 # number of undo structures in system 46options SYSVSHM # System V shared memory 47#options SHMMAXPGS=1024 # 1024 pages is the default 48options LKM # loadable kernel modules 49#options INSECURE # disable kernel security level 50options USERCONF # userconf(4) support 51#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 52 53# Enable experimental buffer queue strategy for better responsiveness under 54# high disk I/O load. Use it with caution - it's not proven to be stable yet. 55#options NEW_BUFQ_STRATEGY 56 57# Which kernel debugger? Uncomment either this: 58options DDB 59# ... or these for KGDB (gdb remote target) 60#makeoptions DEBUG="-g" # debugging symbols for gdb 61#options KGDB 62#options KGDB_DEV=0x0C01 # ttya=0C00 ttyb=0C01 63 64# Other debugging options 65#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 66#options DEBUG # kernel debugging code 67#options DIAGNOSTIC # extra kernel sanity checking 68#options KMEMSTATS # kernel memory statistics (vmstat -m) 69#options PMAP_DEBUG 70#options SCSIDEBUG 71#options SCSIVERBOSE # Verbose SCSI errors 72 73# Compatibility options 74options COMPAT_SUNOS # can run SunOS 4.1.1 executables 75#options COMPAT_SVR4 # can run SVR4 executables 76options COMPAT_43 # and 4.3BSD and ... 77options COMPAT_10 # NetBSD 1.0 78options COMPAT_11 # NetBSD 1.1 79options COMPAT_12 # NetBSD 1.2 80options COMPAT_13 # NetBSD 1.3 81options COMPAT_14 # NetBSD 1.4 82options COMPAT_15 # NetBSD 1.5 83options COMPAT_16 # NetBSD 1.6 84options COMPAT_AOUT_M68K # support for NetBSD a.out executables 85#options COMPAT_LINUX # can run Linux/m68k executables 86options EXEC_AOUT # support for a.out executables 87#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 88 89# Filesystem options 90file-system FFS # Berkeley Fast Filesystem 91file-system NFS # Sun NFS client support 92file-system CD9660 # ISO 9660 + Rock Ridge file system 93file-system FDESC # /dev/fd/* 94file-system KERNFS # /kern 95file-system NULLFS # loopback file system 96file-system OVERLAY # overlay file system 97file-system PROCFS # /proc 98file-system UNION # union file system 99file-system MFS # memory-based filesystem 100 101options NFSSERVER # nfs server support 102options QUOTA # FFS quotas 103#options FFS_EI # FFS Endian Independant support 104options SOFTDEP # FFS soft updates support. 105 106# Networking options 107options INET # IP prototol stack support 108options INET6 # IPV6 109#options IPSEC # IP security 110#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 111#options IPSEC_DEBUG # debug for IP security 112#options GATEWAY # IP packet forwarding 113#options ISO,TPIP # OSI networking 114#options EON # OSI tunneling over IP 115#options CCITT,LLC,HDLC # X.25 116options PFIL_HOOKS # pfil(9) packet filter hooks. 117#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 118 119# Work-around for root on slow servers (insurance...) 120options NFS_BOOT_RWSIZE=1024 121options NFS_BOOT_BOOTPARAM 122 123config netbsd root on ? type ? 124 125# On-board I/O space (required) 126include "arch/sun3/conf/obio.sun3" 127 128# On-board memory (optional) 129# See frame-buffers 130obmem0 at mainbus? 131 132# VME bus support (optional) 133# One unit for each address space 134vme0 at mainbus? # A16/D16 135vme1 at mainbus? # A16/D32 136vme2 at mainbus? # A24/D16 137vme3 at mainbus? # A24/D32 138vme4 at mainbus? # A32/D16 139vme5 at mainbus? # A32/D32 140 141# 142# Serial ports 143# 144zstty0 at zsc1 channel 0 # ttya 145zstty1 at zsc1 channel 1 # ttyb 146 147kbd0 at zsc0 channel 0 # keyboard 148ms0 at zsc0 channel 1 # mouse 149 150# 151# Network devices 152# 153 154# Intel Ethernet (onboard, or VME) 155ie0 at obio0 addr 0x0C0000 ipl 3 156ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 157 158# Lance Ethernet (only onboard) 159le0 at obio0 addr 0x120000 ipl 3 160 161# All Sun3 machines with an "le" (3/50, 3/60) should be 162# presumed to have the old, buggy LANCE chip. (Rev. C) 163options LANCE_REVC_BUG 164 165# 166# Disk and tape devices 167# 168 169# Sun3 "si" SCSI controller (NCR 5380) 170# This driver has several flags which may be enabled using 171# the "flags" directive. Valid flags are: 172# 173# 0x000ff Set (1<<target) to disable disconnect/reselect 174# 0x0ff00 Set (1<<(target+8)) to disable parity checking 175# 0x10000 Set this bit to disable DMA interrupts (poll) 176# 0x20000 Set this bit to disable DMA entirely (use PIO) 177# 178# For example: "flags 0x1000f" would disable DMA interrupts, 179# and disable disconnect/reselect for targets 0-3 180si0 at obio0 addr 0x140000 ipl 2 181si0 at vme2 addr 0x200000 ipl 2 vect 0x40 182si1 at vme2 addr 0x204000 ipl 2 vect 0x41 183 184# Xylogics 450/451 controllers (VME A16/D16) 185xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 186xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 187xy* at xyc? drive ? 188 189# Xylogics 7053 controllers (VME A16/D32) 190xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 191xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 192xd* at xdc? drive ? 193 194# Xylogics 472 tape controllers? 195 196# Sun3/E SCSI+Ethernet board (VME A24/D16) 197# Note: the board uses vect and vect+1 198sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75 199sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77 200si* at sebuf? 201ie* at sebuf? 202 203# 204# Frame buffer devices 205# 206 207include "arch/sun3/conf/bw2.sun3" 208include "arch/sun3/conf/cg4.sun3" 209 210# 3/60 P4 accelerated 8-bit color frame buffer 211# cgsix0 at obmem0 addr 0xff000000 212 213# 3/60 P4 24-bit color frame buffer 214# cgeight0 at obmem0 addr 0xff300000 215 216# Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16). 217cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8 218 219# Support for the CG9 24-bit frame buffer (VME A32/D32). 220# cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA 221 222# 223# SCSI infrastructure 224# 225scsibus* at scsi? 226 227sd* at scsibus? target ? lun ? # SCSI disks 228st* at scsibus? target ? lun ? # SCSI tapes 229cd* at scsibus? target ? lun ? # SCSI CD-ROMs 230ch* at scsibus? target ? lun ? # SCSI changer devices 231ss* at scsibus? target ? lun ? # SCSI scanners 232uk* at scsibus? target ? lun ? # unknown SCSI devices 233 234# Memory-disk drivers 235pseudo-device md 2 236 237# Misc. 238pseudo-device loop 1 # network loopback 239pseudo-device bpfilter 8 # packet filter 240pseudo-device sl 2 # CSLIP 241pseudo-device ppp 2 # PPP 242pseudo-device pppoe # PPP over Ethernet (RFC 2516) 243pseudo-device tun 2 # network tunneling over tty 244#pseudo-device gre 2 # generic L3 over IP tunnel 245#pseudo-device ipfilter # ip filter 246pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 247#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 248#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 249pseudo-device vlan # IEEE 802.1q encapsulation 250pseudo-device bridge # simple inter-network bridging 251#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 252pseudo-device rnd # /dev/random and in-kernel generator 253 254pseudo-device pty # pseudo-terminals 255pseudo-device ptm # pseudo-terminal multiplexor 256pseudo-device vnd 4 # paging to files 257#pseudo-device ccd 4 # concatenated disks 258#pseudo-device cgd 4 # cryptographic disk devices 259#pseudo-device raid 4 # RAIDframe disk driver 260#options RAID_AUTOCONFIG # auto-configuration of RAID components 261# Options to enable various other RAIDframe RAID types. 262# options RF_INCLUDE_EVENODD=1 263# options RF_INCLUDE_RAID5_RS=1 264# options RF_INCLUDE_PARITYLOGGING=1 265# options RF_INCLUDE_CHAINDECLUSTER=1 266# options RF_INCLUDE_INTERDECLUSTER=1 267# options RF_INCLUDE_PARITY_DECLUSTERING=1 268# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 269pseudo-device clockctl # user control of clock subsystem 270pseudo-device ksyms # /dev/ksyms 271