MRCOFFEE revision 1.55
1# $NetBSD: MRCOFFEE,v 1.55 2018/02/05 15:18:11 maxv Exp $
2# From: NetBSD: GENERIC,v 1.197 2006/12/04 23:43:35 elad Exp
3#
4# Mr.Coffee (JavaStation 1) machine description file
5#
6# This configuration is for machines using Open Boot Prom only!
7# The OpenFirmware-variants of JavaStation 1 should use the MRCOFFEE_OFW
8# kernel.
9#
10
11include 	"arch/sparc/conf/std.sparc"
12
13options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
14
15#ident 		"MRCOFFEE-$Revision: 1.55 $"
16
17maxusers	32
18
19## System kernel configuration.  See options(4) for more detail.
20
21
22# Options for variants of the Sun SPARC architecure.
23# We currently support three architecture types; at least one is required.
24options 	SUN4M		# sun4m - SS10, SS20, Classic, etc.
25
26
27## System options specific to the sparc machine type
28
29# Blink the power LED on some machines to indicate the system load.
30#options 	BLINK
31
32# builtin terminal emulations
33#options 	WSEMUL_SUN		# sun terminal emulation
34options 	WSEMUL_VT100		# VT100 / VT220 emulation
35options 	WSEMUL_DEFAULT="\"vt100\""
36
37# customization of console and kernel output - see dev/wscons/wsdisplayvar.h
38options 	WSDISPLAY_COMPAT_USL		# wsconscfg VT handling
39options 	WSDISPLAY_COMPAT_RAWKBD
40options 	WSDISPLAY_CUSTOM_OUTPUT
41options 	WS_DEFAULT_FG=WSCOL_BLACK
42options 	WS_DEFAULT_BG=WSCOL_LIGHT_WHITE
43options 	WS_KERNEL_FG=WSCOL_GREEN
44options 	WS_KERNEL_BG=WSCOL_LIGHT_WHITE
45options 	WSDISPLAY_SCROLLSUPPORT
46options 	FONT_GALLANT12x22	# the console font
47
48
49#### System options that are the same for all ports
50
51## Root device configuration: change the ?'s if you are going to use a
52## nonstandard root partition (other than where the kernel is booted from)
53## and/or nonstandard root type (not ffs or nfs).  Normally this can be
54## automagically determined at boot time.
55
56config		netbsd	root on ? type ?
57
58## System call tracing (see ktrace(1)).
59options 	KTRACE
60
61## System V compatible IPC subsystem.  (msgctl(2), semctl(2), and shmctl(2))
62options 	SYSVMSG		# System V message queues
63options 	SYSVSEM		# System V semaphores
64#options 	SEMMNI=10	# number of semaphore identifiers
65#options 	SEMMNS=60	# number of semaphores in system
66#options 	SEMUME=10	# max number of undo entries per process
67#options 	SEMMNU=30	# number of undo structures in system
68options 	SYSVSHM		# System V shared memory
69
70options 	USERCONF	# userconf(4) support
71#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
72options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
73
74# Alternate buffer queue strategies for better responsiveness under high
75# disk I/O load.
76#options 	BUFQ_READPRIO
77#options 	BUFQ_PRIOCSCAN
78
79## NFS boot options; tries DHCP/BOOTP then BOOTPARAM
80options 	NFS_BOOT_BOOTPARAM
81#options 	NFS_BOOT_BOOTP
82options 	NFS_BOOT_DHCP
83
84#### Debugging options
85
86## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at
87## serial console break or keyboard reset, where the PROM would normally
88## intercept.  DDB_HISTORY_SIZE adds up/down arrow command history.
89options 	DDB			# kernel dynamic debugger
90options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
91#options 	DDB_ONPANIC=1		# see also sysctl(7): `ddb.onpanic'
92
93## You may also use gdb, on another computer connected to this machine over
94## a serial port.  Both KGDB_DEV and KGDB_DEVRATE should be specified;
95## KGDB_DEV is a dev_t encoded device number of the serial port to use, where
96## the minor device number encodes the PROM enumeration of the serial ports,
97## i.e.:
98## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd.
99## (Note: ttyc and ttyd are available only on some sun4 models)
100#options 	KGDB			# support for kernel gdb
101#options 	KGDB_DEV=0xc01		# kgdb device number (this is `ttyb')
102#options 	KGDB_DEVRATE=38400	# baud rate
103
104
105## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file),
106## such that gdb(1) can be used on a kernel coredump.
107
108#makeoptions	DEBUG="-g"
109makeoptions	COPTS="-pipe -mcpu=supersparc -O2"
110
111
112
113## Adds code to the kernel that does internal consistency checks, and will
114## cause the kernel to panic if corruption of internal data structures
115## is detected.
116#options 	DIAGNOSTIC	# extra kernel sanity checking
117
118## Enable (possibly expensive) debugging code that may also display messages
119## on the system console
120#options 	DEBUG
121#options 	LOCKDEBUG
122#options 	SYSCALL_DEBUG
123
124## Make SCSI error messages more verbose when explaining their meanings.
125options 	SCSIVERBOSE
126
127options 	MIIVERBOSE	# verbose PHY autoconfig messages
128
129## `INSECURE' turns off the kernel security level (securelevel = 0 always).
130## This allows writing to /dev/mem, loading kernel modules while multi-user,
131## and other insecurities good only for development work.  Do not use this
132## option on a production machine.
133#options 	INSECURE
134
135## `FDSCRIPTS' allows non-readable but executable scripts by providing a
136## pre-opened opaque file to the script interpreter.  `SETUIDSCRIPTS',
137## which implies FDSCRIPTS, allows scripts to be set-user-id using the same
138## opaque file mechanism.  Perl calls this "secure setuid scripts."
139
140#options 	FDSCRIPTS
141#options 	SETUIDSCRIPTS
142
143## Options for compatibility with previous releases foreign system binaries.
144## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up
145## additional user-level utilities or system configuration files. See
146## compat_sunos(8) and compat_svr4(8).
147
148include 	"conf/compat_netbsd10.config"
149options 	COMPAT_SUNOS	# SunOS 4.x binary compatibility
150#options 	COMPAT_SVR4	# SunOS 5.x binary compatibility
151
152## File systems.  You probably need at least one of FFS or NFS.
153file-system	FFS		# Berkeley Fast Filesystem
154file-system	NFS		# Sun NFS-compatible filesystem client
155file-system	KERNFS		# kernel data-structure filesystem
156file-system	NULLFS		# NULL layered filesystem
157file-system 	OVERLAY		# overlay file system
158file-system	MFS		# memory-based filesystem
159file-system	FDESC		# user file descriptor filesystem
160file-system	UMAPFS		# uid/gid remapping filesystem
161#file-system	LFS		# Log-based filesystem (still experimental)
162file-system	PUFFS		# Userspace file systems (e.g. ntfs-3g & sshfs)
163file-system	PROCFS		# /proc
164#file-system	CD9660		# ISO 9660 + Rock Ridge file system
165#file-system	UNION		# union file system
166#file-system	MSDOSFS		# MS-DOS FAT filesystem(s).
167#file-system	CODA		# Coda File System; also needs vcoda (below)
168file-system	PTYFS		# /dev/pts/N support
169#file-system	TMPFS		# Efficient memory file-system
170#file-system	UDF		# experimental - OSTA UDF CD/DVD file-system
171
172## File system options.
173#options 	NFSSERVER	# Sun NFS-compatible filesystem server
174#options 	QUOTA		# legacy UFS quotas
175#options 	QUOTA2		# new, in-filesystem UFS quotas
176#options 	FFS_EI		# FFS Endian Independent support
177#options 	UFS_DIRHASH	# UFS Large Directory Hashing - Experimental
178options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
179
180## Network protocol support.  In most environments, INET is required.
181options 	INET		# IP (Internet Protocol) v4
182options 	INET6		# IPV6
183#options 	IPSEC		# IP security
184#options 	IPSEC_DEBUG	# debug for IP security
185#options 	GATEWAY		# packet forwarding ("router switch")
186#options 	MROUTING	# packet forwarding of multicast packets
187#options 	PIM		# Protocol Independent Multicast
188#options 	NETATALK	# AppleTalk (over Ethernet) protocol
189options 	NTP		# Network Time Protocol in-kernel support
190#options 	PPS_SYNC	# Add serial line synchronization for NTP
191#options 	IPFILTER_LOG	# Add ipmon(8) logging for ipfilter device
192#options 	IPFILTER_LOOKUP	# ippool(8) support
193#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
194#options 	PPP_BSDCOMP	# Add BSD compression to ppp device
195#options 	PPP_DEFLATE	# Add deflate (libz) compression to ppp device
196#options 	PPP_FILTER	# Add active filters for ppp (via bpf)
197
198
199
200#### Main bus and CPU .. all systems.
201mainbus0 at root
202cpu0	at mainbus0
203
204#### Bus types found on SPARC systems.
205
206obio0	at mainbus0				# sun4 and sun4m
207
208iommu0	at mainbus0				# sun4m
209sbus0	at iommu0				# sun4m
210
211
212#### Standard system devices -- all required for a given architecture
213
214## Auxiliary system registers on sun4c and sun4m
215auxreg0	at obio0				# sun4m
216
217## Mostek clock found on 4/300, sun4c, sun4m and sun4d systems.
218clock0	at obio0				# sun4m
219
220## Timer chip found on 4/300, sun4c, and sun4m systems.
221timer0	at obio0				# sun4m
222
223
224#### Serial port configuration
225
226## NS16x50 serial chips and clones.  Present on the
227## Sun JavaStation-1 and Tadpole SPARCbook 3
228com0	at obio0                                        # sun4m
229
230
231#### Keyboard and mouse
232
233pckbc0	at obio0
234#kbd0	at pckbc0
235#ms0	at pckbc0
236#wskbd* 		at kbd? console ?
237#wsmouse*	at ms? mux 0
238pckbd*		at pckbc?		# PC keyboard
239pms*		at pckbc?		# PS/2 mouse for wsmouse
240wskbd* 		at pckbd? console ?
241wsmouse*	at pms? mux 0
242
243#### Disk controllers and disks
244
245## A disk-like interface to files.  Can be used to create floppy, CD,
246## miniroot images, etc.
247
248#pseudo-device	vnd	
249#options 	VND_COMPRESSION		# compressed vnd(4)
250
251#### Network interfaces
252
253## LANCE Ethernet - an AMD 7990 LANCE behind specialized DMA glue
254ledma0		at sbus0 slot ? offset ?		# sun4m on-board
255le0		at ledma0				# sun4m on-board
256
257
258## Loopback network interface; required
259pseudo-device	loop
260
261## SLIP and CSLIP interfaces, for IP over a serial line.
262#pseudo-device	sl		
263
264## PPP, the successor to SLIP.  See pppd(8).
265#pseudo-device	ppp		
266
267## PPP over Ethernet (RFC 2516)
268#pseudo-device	pppoe
269
270## Network "tunnel" device, allowing protocol stacks to run in the userland.
271## This is used by the third-party user-mode "ppp" program, and others.
272#pseudo-device	tun		
273#pseudo-device	tap			# virtual Ethernet
274
275## Generic L3 over IP tunnel
276#pseudo-device	gre			# generic L3 over IP tunnel
277
278## Berkeley Packet Filter, required to run RARPD.  A generic C-language
279## interface that allows selective examining of incoming packets.
280pseudo-device	bpfilter
281
282#pseudo-device	carp			# Common Address Redundancy Protocol
283
284## IP Filter, used in firewall and NAT applications.  See ipnat(8) for
285## one example of the use of the IP Filter.
286#pseudo-device	ipfilter
287
288## for IPv6
289#pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
290#pseudo-device	faith			# IPv[46] tcp relay translation i/f
291#pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
292
293## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4).
294#pseudo-device	vlan
295
296#### Audio and video devices
297
298## /dev/audio support (`audiocs' plus `audio')
299##
300audiocs0	at sbus0 slot ? offset ?		# SUNW,CS4231
301audio0		at audiocs0
302
303spkr*		at audio?		# PC speaker (synthesized)
304
305## Sun "tcx" accelerated color framebuffer.
306tcx0		at sbus? slot ? offset ?
307wsdisplay0	at tcx0
308
309#### Other device configuration
310
311## Pseudo ttys, required for network logins and programs like screen.
312
313pseudo-device	pty			# pseudo-terminals
314
315## Random device, used to implement /dev/random (a source of random noise),
316## and generate randomness for some kernel formulae.
317
318
319# a pseudo device needed for Coda	# also needs CODA (above)
320#pseudo-device	vcoda			# coda minicache <-> venus comm.
321
322pseudo-device	clockctl		# user control of clock subsystem
323pseudo-device	ksyms			# /dev/ksyms
324pseudo-device	putter			# for puffs and pud
325
326pseudo-device	wsmux			# mouse and keyboard multiplexor
327pseudo-device	wsfont
328