MRCOFFEE revision 1.5
1# $NetBSD: MRCOFFEE,v 1.5 2004/11/10 17:54:07 christos Exp $ 2# From: NetBSD: GENERIC,v 1.160 2004/07/10 12:05:35 uwe Exp 3# 4# Mr.Coffee (JavaStation 1) machine description file 5# 6# This configuration is for machines using Open Boot Prom only! 7# The OpenFirmware-variants of JavaStation 1 should use the MRCOFFEE_OFW 8# kernel. 9# 10 11include "arch/sparc/conf/std.sparc" 12 13options INCLUDE_CONFIG_FILE # embed config file in kernel binary 14 15#ident "MRCOFFEE-$Revision: 1.5 $" 16 17maxusers 32 18 19## System kernel configuration. See options(4) for more detail. 20 21 22# Options for variants of the Sun SPARC architecure. 23# We currently support three architecture types; at least one is required. 24options SUN4M # sun4m - SS10, SS20, Classic, etc. 25 26 27## System options specific to the sparc machine type 28 29# Blink the power LED on some machines to indicate the system load. 30#options BLINK 31 32# XXX: uwe: TCX driver doesn't support RASTERCONSOLE, so don't bother 33## Use a faster console than the PROM's slow drawing routines. Not needed 34## for headless (no framebuffer) machines. 35#options RASTERCONSOLE # fast rasterop console 36#options FONT_GALLANT12x22 # the console font 37#options FONT_BOLD8x16 # a somewhat smaller font 38## default console colors: black-on-white; this can be changed 39## using the following two options. 40#options RASTERCONSOLE_FGCOL=WSCOL_BLACK 41#options RASTERCONSOLE_BGCOL=WSCOL_WHITE 42 43#### System options that are the same for all ports 44 45## Root device configuration: change the ?'s if you are going to use a 46## nonstandard root partition (other than where the kernel is booted from) 47## and/or nonstandard root type (not ffs or nfs). Normally this can be 48## automagically determined at boot time. 49 50config netbsd root on ? type ? 51 52## System call tracing (see ktrace(1)). 53options KTRACE 54options SYSTRACE # system call vetting via systrace(1) 55 56## Collect statistics on kernel malloc's and free's. This does have a 57## significant performance hit on slower machines, so it is intended for 58## diagnostic use only. 59#options KMEMSTATS 60 61## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 62options SYSVMSG # System V message queues 63options SYSVSEM # System V semaphores 64#options SEMMNI=10 # number of semaphore identifiers 65#options SEMMNS=60 # number of semaphores in system 66#options SEMUME=10 # max number of undo entries per process 67#options SEMMNU=30 # number of undo structures in system 68options SYSVSHM # System V shared memory 69#options SHMMAXPGS=1024 # 1024 pages is the default 70options P1003_1B_SEMAPHORE # p1003.1b semaphore support 71 72## Loadable kernel module support; still under development. 73options LKM 74 75options USERCONF # userconf(4) support 76#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 77options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 78 79# Enable experimental buffer queue strategy for better responsiveness under 80# high disk I/O load. Use it with caution - it's not proven to be stable yet. 81#options NEW_BUFQ_STRATEGY 82 83## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 84options NFS_BOOT_BOOTPARAM 85#options NFS_BOOT_BOOTP 86options NFS_BOOT_DHCP 87 88#### Debugging options 89 90## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 91## serial console break or keyboard reset, where the PROM would normally 92## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 93#options DDB # kernel dynamic debugger 94#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 95#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 96 97## You may also use gdb, on another computer connected to this machine over 98## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 99## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 100## the minor device number encodes the PROM enumeration of the serial ports, 101## i.e.: 102## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 103## (Note: ttyc and ttyd are available only on some sun4 models) 104#options KGDB # support for kernel gdb 105#options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 106#options KGDB_DEVRATE=38400 # baud rate 107 108 109## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 110## such that gdb(1) can be used on a kernel coredump. 111 112#makeoptions DEBUG="-g" 113makeoptions COPTS="-pipe -mcpu=supersparc -O2" 114 115 116 117## Adds code to the kernel that does internal consistency checks, and will 118## cause the kernel to panic if corruption of internal data structures 119## is detected. 120#options DIAGNOSTIC # extra kernel sanity checking 121 122## Enable (possibly expensive) debugging code that may also display messages 123## on the system console 124#options DEBUG 125 126## Make SCSI error messages more verbose when explaining their meanings. 127options SCSIVERBOSE 128 129options MIIVERBOSE # verbose PHY autoconfig messages 130 131## `INSECURE' turns off the kernel security level (securelevel = 0 always). 132## This allows writing to /dev/mem, loading kernel modules while multi-user, 133## and other insecurities good only for development work. Do not use this 134## option on a production machine. 135#options INSECURE 136 137## `FDSCRIPTS' allows non-readable but executable scripts by providing a 138## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 139## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 140## opaque file mechanism. Perl calls this "secure setuid scripts." 141 142#options FDSCRIPTS 143#options SETUIDSCRIPTS 144 145## Options for compatibility with previous releases foreign system binaries. 146## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 147## additional user-level utilities or system configuration files. See 148## compat_sunos(8) and compat_svr4(8). 149 150options COMPAT_43 # 4.3BSD system interfaces 151options COMPAT_10 # NetBSD 1.0 binary compatibility 152options COMPAT_11 # NetBSD 1.1 binary compatibility 153options COMPAT_12 # NetBSD 1.2 binary compatibility 154options COMPAT_13 # NetBSD 1.3 binary compatibility 155options COMPAT_14 # NetBSD 1.4 binary compatibility 156options COMPAT_16 # NetBSD 1.6 binary compatibility 157options COMPAT_20 # NetBSD 2.0 binary compatibility 158options COMPAT_SUNOS # SunOS 4.x binary compatibility 159options COMPAT_SVR4 # SunOS 5.x binary compatibility 160options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 161 162## File systems. You probably need at least one of FFS or NFS. 163file-system FFS # Berkeley Fast Filesystem 164file-system NFS # Sun NFS-compatible filesystem client 165file-system KERNFS # kernel data-structure filesystem 166file-system NULLFS # NULL layered filesystem 167file-system OVERLAY # overlay file system 168file-system MFS # memory-based filesystem 169file-system FDESC # user file descriptor filesystem 170file-system UMAPFS # uid/gid remapping filesystem 171#file-system LFS # Log-based filesystem (still experimental) 172file-system PORTAL # portal filesystem (still experimental) 173file-system PROCFS # /proc 174#file-system CD9660 # ISO 9660 + Rock Ridge file system 175#file-system UNION # union file system 176#file-system MSDOSFS # MS-DOS FAT filesystem(s). 177#file-system CODA # Coda File System; also needs vcoda (below) 178 179## File system options. 180#options NFSSERVER # Sun NFS-compatible filesystem server 181#options QUOTA # FFS quotas 182#options FFS_EI # FFS Endian Independent support 183#options SOFTDEP # FFS soft updates support. 184 185## Network protocol support. In most environments, INET is required. 186options INET # IP (Internet Protocol) v4 187options INET6 # IPV6 188#options IPSEC # IP security 189#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 190#options IPSEC_DEBUG # debug for IP security 191#options GATEWAY # packet forwarding ("router switch") 192#options MROUTING # packet forwarding of multicast packets 193#options PIM # Protocol Independent Multicast 194#options DIRECTED_BROADCAST # allow broadcasts through routers 195options NS # Xerox NS networking 196#options NSIP # Xerox NS tunneling over IP 197options ISO,TPIP # OSI networking 198#options EON # OSI tunneling over IP 199#options CCITT,LLC,HDLC # X.25 packet switched protocol 200#options NETATALK # AppleTalk (over Ethernet) protocol 201options NTP # Network Time Protocol in-kernel support 202#options PPS_SYNC # Add serial line synchronization for NTP 203#options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 204#options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 205#options IPFILTER_DEFAULT_BLOCK # block all packets by default 206#options PPP_BSDCOMP # Add BSD compression to ppp device 207#options PPP_DEFLATE # Add deflate (libz) compression to ppp device 208#options PPP_FILTER # Add active filters for ppp (via bpf) 209 210 211 212#### Main bus and CPU .. all systems. 213mainbus0 at root 214cpu0 at mainbus0 215 216#### Bus types found on SPARC systems. 217 218obio0 at mainbus0 # sun4 and sun4m 219 220iommu0 at mainbus0 # sun4m 221sbus0 at iommu0 # sun4m 222 223 224#### Standard system devices -- all required for a given architecture 225 226## Auxiliary system registers on sun4c and sun4m 227auxreg0 at obio0 # sun4m 228 229## Mostek clock found on 4/300, sun4c, sun4m and sun4d systems. 230clock0 at obio0 # sun4m 231 232## Timer chip found on 4/300, sun4c, and sun4m systems. 233timer0 at obio0 # sun4m 234 235 236#### Serial port configuration 237 238## NS16x50 serial chips and clones. Present on the 239## Sun JavaStation-1 and Tadpole SPARCbook 3 240com0 at obio0 # sun4m 241 242 243#### Keyboard and mouse 244 245pckbc0 at obio0 246kbd0 at pckbc0 247ms0 at pckbc0 248 249 250#### Disk controllers and disks 251 252## A disk-like interface to files. Can be used to create floppy, CD, 253## miniroot images, etc. 254 255#pseudo-device vnd 4 256 257 258#### Network interfaces 259 260## LANCE Ethernet - an AMD 7990 LANCE behind specialized DMA glue 261ledma0 at sbus0 slot ? offset ? # sun4m on-board 262le0 at ledma0 # sun4m on-board 263 264 265## Loopback network interface; required 266pseudo-device loop 267 268## SLIP and CSLIP interfaces, for IP over a serial line. 269#pseudo-device sl 2 270 271## PPP, the successor to SLIP. See pppd(8). 272#pseudo-device ppp 2 273 274## PPP over Ethernet (RFC 2516) 275#pseudo-device pppoe 276 277## Network "tunnel" device, allowing protocol stacks to run in the userland. 278## This is used by the third-party user-mode "ppp" program, and others. 279#pseudo-device tun 4 280 281## Generic L3 over IP tunnel 282#pseudo-device gre 2 # generic L3 over IP tunnel 283 284## Berkeley Packet Filter, required to run RARPD. A generic C-language 285## interface that allows selective examining of incoming packets. 286pseudo-device bpfilter 8 287 288## IP Filter, used in firewall and NAT applications. See ipnat(8) for 289## one example of the use of the IP Filter. 290#pseudo-device ipfilter 291 292## for IPv6 293#pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 294#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 295#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 296 297## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 298#pseudo-device vlan 299 300#### Audio and video devices 301 302## /dev/audio support (`audiocs' plus `audio') 303## 304audiocs0 at sbus0 slot ? offset ? # SUNW,CS4231 305audio0 at audiocs0 306 307## Sun "tcx" accelerated color framebuffer. 308tcx0 at sbus? slot ? offset ? 309 310 311#### Other device configuration 312 313## Pseudo ttys, required for network logins and programs like screen. 314 315pseudo-device pty # pseudo-terminals 316 317## Random device, used to implement /dev/random (a source of random noise), 318## and generate randomness for some kernel formulae. 319 320pseudo-device rnd 321 322# a pseudo device needed for Coda # also needs CODA (above) 323#pseudo-device vcoda 4 # coda minicache <-> venus comm. 324 325pseudo-device clockctl # user control of clock subsystem 326pseudo-device ksyms # /dev/ksyms 327