MRCOFFEE revision 1.24
1# $NetBSD: MRCOFFEE,v 1.24 2008/11/12 12:36:06 ad Exp $ 2# From: NetBSD: GENERIC,v 1.197 2006/12/04 23:43:35 elad Exp 3# 4# Mr.Coffee (JavaStation 1) machine description file 5# 6# This configuration is for machines using Open Boot Prom only! 7# The OpenFirmware-variants of JavaStation 1 should use the MRCOFFEE_OFW 8# kernel. 9# 10 11include "arch/sparc/conf/std.sparc" 12 13options INCLUDE_CONFIG_FILE # embed config file in kernel binary 14 15#ident "MRCOFFEE-$Revision: 1.24 $" 16 17maxusers 32 18 19## System kernel configuration. See options(4) for more detail. 20 21 22# Options for variants of the Sun SPARC architecure. 23# We currently support three architecture types; at least one is required. 24options SUN4M # sun4m - SS10, SS20, Classic, etc. 25 26 27## System options specific to the sparc machine type 28 29# Blink the power LED on some machines to indicate the system load. 30#options BLINK 31 32# XXX: uwe: TCX driver doesn't support RASTERCONSOLE, so don't bother 33## Use a faster console than the PROM's slow drawing routines. Not needed 34## for headless (no framebuffer) machines. 35#options RASTERCONSOLE # fast rasterop console 36#options FONT_GALLANT12x22 # the console font 37#options FONT_BOLD8x16 # a somewhat smaller font 38## default console colors: black-on-white; this can be changed 39## using the following two options. 40#options RASTERCONSOLE_FGCOL=WSCOL_BLACK 41#options RASTERCONSOLE_BGCOL=WSCOL_WHITE 42 43#### System options that are the same for all ports 44 45## Root device configuration: change the ?'s if you are going to use a 46## nonstandard root partition (other than where the kernel is booted from) 47## and/or nonstandard root type (not ffs or nfs). Normally this can be 48## automagically determined at boot time. 49 50config netbsd root on ? type ? 51 52## System call tracing (see ktrace(1)). 53options KTRACE 54 55## Collect statistics on kernel malloc's and free's. This does have a 56## significant performance hit on slower machines, so it is intended for 57## diagnostic use only. 58#options KMEMSTATS 59 60## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 61options SYSVMSG # System V message queues 62options SYSVSEM # System V semaphores 63#options SEMMNI=10 # number of semaphore identifiers 64#options SEMMNS=60 # number of semaphores in system 65#options SEMUME=10 # max number of undo entries per process 66#options SEMMNU=30 # number of undo structures in system 67options SYSVSHM # System V shared memory 68#options SHMMAXPGS=1024 # 1024 pages is the default 69options P1003_1B_SEMAPHORE # p1003.1b semaphore support 70 71## Loadable kernel module support; still under development. 72 73options USERCONF # userconf(4) support 74#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 75options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 76 77# Enable experimental buffer queue strategy for better responsiveness under 78# high disk I/O load. Use it with caution - it's not proven to be stable yet. 79#options BUFQ_READPRIO 80#options BUFQ_PRIOCSCAN 81 82## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 83options NFS_BOOT_BOOTPARAM 84#options NFS_BOOT_BOOTP 85options NFS_BOOT_DHCP 86 87#### Debugging options 88 89## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 90## serial console break or keyboard reset, where the PROM would normally 91## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 92#options DDB # kernel dynamic debugger 93#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 94#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 95 96## You may also use gdb, on another computer connected to this machine over 97## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 98## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 99## the minor device number encodes the PROM enumeration of the serial ports, 100## i.e.: 101## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 102## (Note: ttyc and ttyd are available only on some sun4 models) 103#options KGDB # support for kernel gdb 104#options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 105#options KGDB_DEVRATE=38400 # baud rate 106 107 108## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 109## such that gdb(1) can be used on a kernel coredump. 110 111#makeoptions DEBUG="-g" 112makeoptions COPTS="-pipe -mcpu=supersparc -O2" 113 114 115 116## Adds code to the kernel that does internal consistency checks, and will 117## cause the kernel to panic if corruption of internal data structures 118## is detected. 119#options DIAGNOSTIC # extra kernel sanity checking 120 121## Enable (possibly expensive) debugging code that may also display messages 122## on the system console 123#options DEBUG 124 125## Make SCSI error messages more verbose when explaining their meanings. 126options SCSIVERBOSE 127 128options MIIVERBOSE # verbose PHY autoconfig messages 129 130## `INSECURE' turns off the kernel security level (securelevel = 0 always). 131## This allows writing to /dev/mem, loading kernel modules while multi-user, 132## and other insecurities good only for development work. Do not use this 133## option on a production machine. 134#options INSECURE 135 136## `FDSCRIPTS' allows non-readable but executable scripts by providing a 137## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 138## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 139## opaque file mechanism. Perl calls this "secure setuid scripts." 140 141#options FDSCRIPTS 142#options SETUIDSCRIPTS 143 144## Options for compatibility with previous releases foreign system binaries. 145## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 146## additional user-level utilities or system configuration files. See 147## compat_sunos(8) and compat_svr4(8). 148 149options COMPAT_43 # 4.3BSD system interfaces 150options COMPAT_10 # NetBSD 1.0 binary compatibility 151options COMPAT_11 # NetBSD 1.1 binary compatibility 152options COMPAT_12 # NetBSD 1.2 binary compatibility 153options COMPAT_13 # NetBSD 1.3 binary compatibility 154options COMPAT_14 # NetBSD 1.4 binary compatibility 155options COMPAT_15 # NetBSD 1.5 binary compatibility 156options COMPAT_16 # NetBSD 1.6 binary compatibility 157options COMPAT_20 # NetBSD 2.0 binary compatibility 158options COMPAT_30 # NetBSD 3.0 binary compatibility 159options COMPAT_40 # NetBSD 4.0 binary compatibility 160options COMPAT_SUNOS # SunOS 4.x binary compatibility 161options COMPAT_SVR4 # SunOS 5.x binary compatibility 162options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 163 164## File systems. You probably need at least one of FFS or NFS. 165file-system FFS # Berkeley Fast Filesystem 166file-system NFS # Sun NFS-compatible filesystem client 167file-system KERNFS # kernel data-structure filesystem 168file-system NULLFS # NULL layered filesystem 169file-system OVERLAY # overlay file system 170file-system MFS # memory-based filesystem 171file-system FDESC # user file descriptor filesystem 172file-system UMAPFS # uid/gid remapping filesystem 173#file-system LFS # Log-based filesystem (still experimental) 174file-system PORTAL # portal filesystem (still experimental) 175file-system PROCFS # /proc 176#file-system CD9660 # ISO 9660 + Rock Ridge file system 177#file-system UNION # union file system 178#file-system MSDOSFS # MS-DOS FAT filesystem(s). 179#file-system CODA # Coda File System; also needs vcoda (below) 180file-system PTYFS # /dev/pts/N support 181#file-system TMPFS # Efficient memory file-system 182#file-system UDF # experimental - OSTA UDF CD/DVD file-system 183 184## File system options. 185#options NFSSERVER # Sun NFS-compatible filesystem server 186#options QUOTA # FFS quotas 187#options FFS_EI # FFS Endian Independent support 188#options SOFTDEP # FFS soft updates support. 189#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 190options FFS_NO_SNAPSHOT # No FFS snapshot support 191 192## Network protocol support. In most environments, INET is required. 193options INET # IP (Internet Protocol) v4 194options INET6 # IPV6 195#options IPSEC # IP security 196#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 197#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 198#options IPSEC_DEBUG # debug for IP security 199#options GATEWAY # packet forwarding ("router switch") 200#options MROUTING # packet forwarding of multicast packets 201#options PIM # Protocol Independent Multicast 202#options DIRECTED_BROADCAST # allow broadcasts through routers 203options ISO,TPIP # OSI networking 204#options EON # OSI tunneling over IP 205#options NETATALK # AppleTalk (over Ethernet) protocol 206options NTP # Network Time Protocol in-kernel support 207#options PPS_SYNC # Add serial line synchronization for NTP 208#options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 209#options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 210#options IPFILTER_LOOKUP # ippool(8) support 211#options IPFILTER_DEFAULT_BLOCK # block all packets by default 212#options PPP_BSDCOMP # Add BSD compression to ppp device 213#options PPP_DEFLATE # Add deflate (libz) compression to ppp device 214#options PPP_FILTER # Add active filters for ppp (via bpf) 215 216 217 218#### Main bus and CPU .. all systems. 219mainbus0 at root 220cpu0 at mainbus0 221 222#### Bus types found on SPARC systems. 223 224obio0 at mainbus0 # sun4 and sun4m 225 226iommu0 at mainbus0 # sun4m 227sbus0 at iommu0 # sun4m 228 229 230#### Standard system devices -- all required for a given architecture 231 232## Auxiliary system registers on sun4c and sun4m 233auxreg0 at obio0 # sun4m 234 235## Mostek clock found on 4/300, sun4c, sun4m and sun4d systems. 236clock0 at obio0 # sun4m 237 238## Timer chip found on 4/300, sun4c, and sun4m systems. 239timer0 at obio0 # sun4m 240 241 242#### Serial port configuration 243 244## NS16x50 serial chips and clones. Present on the 245## Sun JavaStation-1 and Tadpole SPARCbook 3 246com0 at obio0 # sun4m 247 248 249#### Keyboard and mouse 250 251pckbc0 at obio0 252kbd0 at pckbc0 253ms0 at pckbc0 254 255 256#### Disk controllers and disks 257 258## A disk-like interface to files. Can be used to create floppy, CD, 259## miniroot images, etc. 260 261#pseudo-device vnd 262#options VND_COMPRESSION # compressed vnd(4) 263 264#### Network interfaces 265 266## LANCE Ethernet - an AMD 7990 LANCE behind specialized DMA glue 267ledma0 at sbus0 slot ? offset ? # sun4m on-board 268le0 at ledma0 # sun4m on-board 269 270 271## Loopback network interface; required 272pseudo-device loop 273 274## SLIP and CSLIP interfaces, for IP over a serial line. 275#pseudo-device sl 276 277## PPP, the successor to SLIP. See pppd(8). 278#pseudo-device ppp 279 280## PPP over Ethernet (RFC 2516) 281#pseudo-device pppoe 282 283## Network "tunnel" device, allowing protocol stacks to run in the userland. 284## This is used by the third-party user-mode "ppp" program, and others. 285#pseudo-device tun 286#pseudo-device tap # virtual Ethernet 287 288## Generic L3 over IP tunnel 289#pseudo-device gre # generic L3 over IP tunnel 290 291## Berkeley Packet Filter, required to run RARPD. A generic C-language 292## interface that allows selective examining of incoming packets. 293pseudo-device bpfilter 294 295#pseudo-device carp # Common Address Redundancy Protocol 296 297## IP Filter, used in firewall and NAT applications. See ipnat(8) for 298## one example of the use of the IP Filter. 299#pseudo-device ipfilter 300 301## for IPv6 302#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 303#pseudo-device faith # IPv[46] tcp relay translation i/f 304#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 305 306## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 307#pseudo-device vlan 308 309#### Audio and video devices 310 311## /dev/audio support (`audiocs' plus `audio') 312## 313audiocs0 at sbus0 slot ? offset ? # SUNW,CS4231 314audio0 at audiocs0 315 316## Sun "tcx" accelerated color framebuffer. 317tcx0 at sbus? slot ? offset ? 318 319 320#### Other device configuration 321 322## Pseudo ttys, required for network logins and programs like screen. 323 324pseudo-device pty # pseudo-terminals 325 326## Random device, used to implement /dev/random (a source of random noise), 327## and generate randomness for some kernel formulae. 328 329pseudo-device rnd 330 331# a pseudo device needed for Coda # also needs CODA (above) 332#pseudo-device vcoda 4 # coda minicache <-> venus comm. 333 334pseudo-device clockctl # user control of clock subsystem 335pseudo-device ksyms # /dev/ksyms 336