MRCOFFEE revision 1.15
1# $NetBSD: MRCOFFEE,v 1.15 2006/02/04 03:40:41 rpaulo Exp $ 2# From: NetBSD: GENERIC,v 1.160 2004/07/10 12:05:35 uwe Exp 3# 4# Mr.Coffee (JavaStation 1) machine description file 5# 6# This configuration is for machines using Open Boot Prom only! 7# The OpenFirmware-variants of JavaStation 1 should use the MRCOFFEE_OFW 8# kernel. 9# 10 11include "arch/sparc/conf/std.sparc" 12 13options INCLUDE_CONFIG_FILE # embed config file in kernel binary 14 15#ident "MRCOFFEE-$Revision: 1.15 $" 16 17maxusers 32 18 19## System kernel configuration. See options(4) for more detail. 20 21 22# Options for variants of the Sun SPARC architecure. 23# We currently support three architecture types; at least one is required. 24options SUN4M # sun4m - SS10, SS20, Classic, etc. 25 26 27## System options specific to the sparc machine type 28 29# Blink the power LED on some machines to indicate the system load. 30#options BLINK 31 32# XXX: uwe: TCX driver doesn't support RASTERCONSOLE, so don't bother 33## Use a faster console than the PROM's slow drawing routines. Not needed 34## for headless (no framebuffer) machines. 35#options RASTERCONSOLE # fast rasterop console 36#options FONT_GALLANT12x22 # the console font 37#options FONT_BOLD8x16 # a somewhat smaller font 38## default console colors: black-on-white; this can be changed 39## using the following two options. 40#options RASTERCONSOLE_FGCOL=WSCOL_BLACK 41#options RASTERCONSOLE_BGCOL=WSCOL_WHITE 42 43#### System options that are the same for all ports 44 45## Root device configuration: change the ?'s if you are going to use a 46## nonstandard root partition (other than where the kernel is booted from) 47## and/or nonstandard root type (not ffs or nfs). Normally this can be 48## automagically determined at boot time. 49 50config netbsd root on ? type ? 51 52## System call tracing (see ktrace(1)). 53options KTRACE 54options SYSTRACE # system call vetting via systrace(1) 55 56## Collect statistics on kernel malloc's and free's. This does have a 57## significant performance hit on slower machines, so it is intended for 58## diagnostic use only. 59#options KMEMSTATS 60 61## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 62options SYSVMSG # System V message queues 63options SYSVSEM # System V semaphores 64#options SEMMNI=10 # number of semaphore identifiers 65#options SEMMNS=60 # number of semaphores in system 66#options SEMUME=10 # max number of undo entries per process 67#options SEMMNU=30 # number of undo structures in system 68options SYSVSHM # System V shared memory 69#options SHMMAXPGS=1024 # 1024 pages is the default 70options P1003_1B_SEMAPHORE # p1003.1b semaphore support 71 72## Loadable kernel module support; still under development. 73options LKM 74 75options USERCONF # userconf(4) support 76#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 77options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 78 79# Enable experimental buffer queue strategy for better responsiveness under 80# high disk I/O load. Use it with caution - it's not proven to be stable yet. 81#options BUFQ_READPRIO 82#options BUFQ_PRIOCSCAN 83 84## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 85options NFS_BOOT_BOOTPARAM 86#options NFS_BOOT_BOOTP 87options NFS_BOOT_DHCP 88 89#### Debugging options 90 91## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 92## serial console break or keyboard reset, where the PROM would normally 93## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 94#options DDB # kernel dynamic debugger 95#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 96#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 97 98## You may also use gdb, on another computer connected to this machine over 99## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 100## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 101## the minor device number encodes the PROM enumeration of the serial ports, 102## i.e.: 103## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 104## (Note: ttyc and ttyd are available only on some sun4 models) 105#options KGDB # support for kernel gdb 106#options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 107#options KGDB_DEVRATE=38400 # baud rate 108 109 110## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 111## such that gdb(1) can be used on a kernel coredump. 112 113#makeoptions DEBUG="-g" 114makeoptions COPTS="-pipe -mcpu=supersparc -O2" 115 116 117 118## Adds code to the kernel that does internal consistency checks, and will 119## cause the kernel to panic if corruption of internal data structures 120## is detected. 121#options DIAGNOSTIC # extra kernel sanity checking 122 123## Enable (possibly expensive) debugging code that may also display messages 124## on the system console 125#options DEBUG 126 127## Make SCSI error messages more verbose when explaining their meanings. 128options SCSIVERBOSE 129 130options MIIVERBOSE # verbose PHY autoconfig messages 131 132## `INSECURE' turns off the kernel security level (securelevel = 0 always). 133## This allows writing to /dev/mem, loading kernel modules while multi-user, 134## and other insecurities good only for development work. Do not use this 135## option on a production machine. 136#options INSECURE 137 138## `FDSCRIPTS' allows non-readable but executable scripts by providing a 139## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 140## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 141## opaque file mechanism. Perl calls this "secure setuid scripts." 142 143#options FDSCRIPTS 144#options SETUIDSCRIPTS 145 146## Options for compatibility with previous releases foreign system binaries. 147## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 148## additional user-level utilities or system configuration files. See 149## compat_sunos(8) and compat_svr4(8). 150 151options COMPAT_43 # 4.3BSD system interfaces 152options COMPAT_10 # NetBSD 1.0 binary compatibility 153options COMPAT_11 # NetBSD 1.1 binary compatibility 154options COMPAT_12 # NetBSD 1.2 binary compatibility 155options COMPAT_13 # NetBSD 1.3 binary compatibility 156options COMPAT_14 # NetBSD 1.4 binary compatibility 157options COMPAT_16 # NetBSD 1.6 binary compatibility 158options COMPAT_20 # NetBSD 2.0 binary compatibility 159options COMPAT_30 # NetBSD 3.0 compatibility. 160options COMPAT_SUNOS # SunOS 4.x binary compatibility 161options COMPAT_SVR4 # SunOS 5.x binary compatibility 162options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 163 164## File systems. You probably need at least one of FFS or NFS. 165file-system FFS # Berkeley Fast Filesystem 166file-system NFS # Sun NFS-compatible filesystem client 167file-system KERNFS # kernel data-structure filesystem 168file-system NULLFS # NULL layered filesystem 169file-system OVERLAY # overlay file system 170file-system MFS # memory-based filesystem 171file-system FDESC # user file descriptor filesystem 172file-system UMAPFS # uid/gid remapping filesystem 173#file-system LFS # Log-based filesystem (still experimental) 174file-system PORTAL # portal filesystem (still experimental) 175file-system PROCFS # /proc 176#file-system CD9660 # ISO 9660 + Rock Ridge file system 177#file-system UNION # union file system 178#file-system MSDOSFS # MS-DOS FAT filesystem(s). 179#file-system CODA # Coda File System; also needs vcoda (below) 180file-system PTYFS # /dev/pts/N support 181 182## File system options. 183#options NFSSERVER # Sun NFS-compatible filesystem server 184#options QUOTA # FFS quotas 185#options FFS_EI # FFS Endian Independent support 186#options SOFTDEP # FFS soft updates support. 187options FFS_NO_SNAPSHOT # No FFS snapshot support 188 189## Network protocol support. In most environments, INET is required. 190options INET # IP (Internet Protocol) v4 191options INET6 # IPV6 192#options IPSEC # IP security 193#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 194#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 195#options IPSEC_DEBUG # debug for IP security 196#options GATEWAY # packet forwarding ("router switch") 197#options MROUTING # packet forwarding of multicast packets 198#options PIM # Protocol Independent Multicast 199#options DIRECTED_BROADCAST # allow broadcasts through routers 200options NS # Xerox NS networking 201#options NSIP # Xerox NS tunneling over IP 202options ISO,TPIP # OSI networking 203#options EON # OSI tunneling over IP 204#options CCITT,LLC,HDLC # X.25 packet switched protocol 205#options NETATALK # AppleTalk (over Ethernet) protocol 206options NTP # Network Time Protocol in-kernel support 207#options PPS_SYNC # Add serial line synchronization for NTP 208#options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 209#options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 210#options IPFILTER_DEFAULT_BLOCK # block all packets by default 211#options PPP_BSDCOMP # Add BSD compression to ppp device 212#options PPP_DEFLATE # Add deflate (libz) compression to ppp device 213#options PPP_FILTER # Add active filters for ppp (via bpf) 214 215 216 217#### Main bus and CPU .. all systems. 218mainbus0 at root 219cpu0 at mainbus0 220 221#### Bus types found on SPARC systems. 222 223obio0 at mainbus0 # sun4 and sun4m 224 225iommu0 at mainbus0 # sun4m 226sbus0 at iommu0 # sun4m 227 228 229#### Standard system devices -- all required for a given architecture 230 231## Auxiliary system registers on sun4c and sun4m 232auxreg0 at obio0 # sun4m 233 234## Mostek clock found on 4/300, sun4c, sun4m and sun4d systems. 235clock0 at obio0 # sun4m 236 237## Timer chip found on 4/300, sun4c, and sun4m systems. 238timer0 at obio0 # sun4m 239 240 241#### Serial port configuration 242 243## NS16x50 serial chips and clones. Present on the 244## Sun JavaStation-1 and Tadpole SPARCbook 3 245com0 at obio0 # sun4m 246 247 248#### Keyboard and mouse 249 250pckbc0 at obio0 251kbd0 at pckbc0 252ms0 at pckbc0 253 254 255#### Disk controllers and disks 256 257## A disk-like interface to files. Can be used to create floppy, CD, 258## miniroot images, etc. 259 260#pseudo-device vnd 4 261 262 263#### Network interfaces 264 265## LANCE Ethernet - an AMD 7990 LANCE behind specialized DMA glue 266ledma0 at sbus0 slot ? offset ? # sun4m on-board 267le0 at ledma0 # sun4m on-board 268 269 270## Loopback network interface; required 271pseudo-device loop 272 273## SLIP and CSLIP interfaces, for IP over a serial line. 274#pseudo-device sl 2 275 276## PPP, the successor to SLIP. See pppd(8). 277#pseudo-device ppp 2 278 279## PPP over Ethernet (RFC 2516) 280#pseudo-device pppoe 281 282## Network "tunnel" device, allowing protocol stacks to run in the userland. 283## This is used by the third-party user-mode "ppp" program, and others. 284#pseudo-device tun 4 285 286## Generic L3 over IP tunnel 287#pseudo-device gre 2 # generic L3 over IP tunnel 288 289## Berkeley Packet Filter, required to run RARPD. A generic C-language 290## interface that allows selective examining of incoming packets. 291pseudo-device bpfilter 292 293## IP Filter, used in firewall and NAT applications. See ipnat(8) for 294## one example of the use of the IP Filter. 295#pseudo-device ipfilter 296 297## for IPv6 298#pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 299#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 300#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 301 302## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 303#pseudo-device vlan 304 305#### Audio and video devices 306 307## /dev/audio support (`audiocs' plus `audio') 308## 309audiocs0 at sbus0 slot ? offset ? # SUNW,CS4231 310audio0 at audiocs0 311 312## Sun "tcx" accelerated color framebuffer. 313tcx0 at sbus? slot ? offset ? 314 315 316#### Other device configuration 317 318## Pseudo ttys, required for network logins and programs like screen. 319 320pseudo-device pty # pseudo-terminals 321 322## Random device, used to implement /dev/random (a source of random noise), 323## and generate randomness for some kernel formulae. 324 325pseudo-device rnd 326 327# a pseudo device needed for Coda # also needs CODA (above) 328#pseudo-device vcoda 4 # coda minicache <-> venus comm. 329 330pseudo-device clockctl # user control of clock subsystem 331pseudo-device ksyms # /dev/ksyms 332