MRCOFFEE revision 1.1
1# $NetBSD: MRCOFFEE,v 1.1 2003/12/15 19:33:01 martin Exp $ 2# From: NetBSD: GENERIC,v 1.148 2003/10/07 09:43:58 tron Exp 3# 4# Mr.Coffee (JavaStation 1) machine description file 5# 6# This configuration is for machines using Open Boot Prom only! 7# The OpenFirmware-variants of JavaStation 1 should use the MRCOFFEE_OFW 8# kernel. 9# 10 11include "arch/sparc/conf/std.sparc" 12 13options INCLUDE_CONFIG_FILE # embed config file in kernel binary 14 15#ident "MRCOFFEE-$Revision: 1.1 $" 16 17maxusers 32 18 19## System kernel configuration. See options(4) for more detail. 20 21 22# Options for variants of the Sun SPARC architecure. 23# We currently support three architecture types; at least one is required. 24options SUN4M # sun4m - SS10, SS20, Classic, etc. 25 26 27## System options specific to the sparc machine type 28 29# Blink the power LED on some machines to indicate the system load. 30#options BLINK 31 32# XXX: uwe: TCX driver doesn't support RASTERCONSOLE, so don't bother 33## Use a faster console than the PROM's slow drawing routines. Not needed 34## for headless (no framebuffer) machines. 35#options RASTERCONSOLE # fast rasterop console 36#options FONT_GALLANT12x22 # the console font 37#options FONT_BOLD8x16 # a somewhat smaller font 38## default console colors: black-on-white; this can be changed 39## using the following two options. 40#options RASTERCONSOLE_FGCOL=WSCOL_BLACK 41#options RASTERCONSOLE_BGCOL=WSCOL_WHITE 42 43#### System options that are the same for all ports 44 45## Root device configuration: change the ?'s if you are going to use a 46## nonstandard root partition (other than where the kernel is booted from) 47## and/or nonstandard root type (not ffs or nfs). Normally this can be 48## automagically determined at boot time. 49 50config netbsd root on ? type ? 51 52## System call tracing (see ktrace(1)). 53options KTRACE 54options SYSTRACE # system call vetting via systrace(1) 55 56## Collect statistics on kernel malloc's and free's. This does have a 57## significant performance hit on slower machines, so it is intended for 58## diagnostic use only. 59#options KMEMSTATS 60 61## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 62options SYSVMSG # System V message queues 63options SYSVSEM # System V semaphores 64#options SEMMNI=10 # number of semaphore identifiers 65#options SEMMNS=60 # number of semaphores in system 66#options SEMUME=10 # max number of undo entries per process 67#options SEMMNU=30 # number of undo structures in system 68options SYSVSHM # System V shared memory 69#options SHMMAXPGS=1024 # 1024 pages is the default 70 71## Loadable kernel module support; still under development. 72options LKM 73 74options USERCONF # userconf(4) support 75#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 76 77# Enable experimental buffer queue strategy for better responsiveness under 78# high disk I/O load. Use it with caution - it's not proven to be stable yet. 79#options NEW_BUFQ_STRATEGY 80 81## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 82options NFS_BOOT_BOOTPARAM 83#options NFS_BOOT_BOOTP 84options NFS_BOOT_DHCP 85 86#### Debugging options 87 88## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 89## serial console break or keyboard reset, where the PROM would normally 90## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 91#options DDB # kernel dynamic debugger 92#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 93#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 94 95## You may also use gdb, on another computer connected to this machine over 96## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 97## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 98## the minor device number encodes the PROM enumeration of the serial ports, 99## i.e.: 100## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 101## (Note: ttyc and ttyd are available only on some sun4 models) 102#options KGDB # support for kernel gdb 103#options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 104#options KGDB_DEVRATE=38400 # baud rate 105 106 107## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 108## such that gdb(1) can be used on a kernel coredump. 109 110#makeoptions DEBUG="-g" 111makeoptions COPTS="-pipe -mcpu=supersparc -O2" 112 113 114 115## Adds code to the kernel that does internal consistency checks, and will 116## cause the kernel to panic if corruption of internal data structures 117## is detected. 118#options DIAGNOSTIC # extra kernel sanity checking 119 120## Enable (possibly expensive) debugging code that may also display messages 121## on the system console 122#options DEBUG 123 124## Make SCSI error messages more verbose when explaining their meanings. 125options SCSIVERBOSE 126 127options MIIVERBOSE # verbose PHY autoconfig messages 128 129## `INSECURE' turns off the kernel security level (securelevel = 0 always). 130## This allows writing to /dev/mem, loading kernel modules while multi-user, 131## and other insecurities good only for development work. Do not use this 132## option on a production machine. 133#options INSECURE 134 135## `FDSCRIPTS' allows non-readable but executable scripts by providing a 136## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 137## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 138## opaque file mechanism. Perl calls this "secure setuid scripts." 139 140#options FDSCRIPTS 141#options SETUIDSCRIPTS 142 143## Options for compatibility with previous releases foreign system binaries. 144## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 145## additional user-level utilities or system configuration files. See 146## compat_sunos(8) and compat_svr4(8). 147 148options COMPAT_43 # 4.3BSD system interfaces 149options COMPAT_10 # NetBSD 1.0 binary compatibility 150options COMPAT_11 # NetBSD 1.1 binary compatibility 151options COMPAT_12 # NetBSD 1.2 binary compatibility 152options COMPAT_13 # NetBSD 1.3 binary compatibility 153options COMPAT_14 # NetBSD 1.4 binary compatibility 154options COMPAT_16 # NetBSD 1.6 binary compatibility 155options COMPAT_SUNOS # SunOS 4.x binary compatibility 156options COMPAT_SVR4 # SunOS 5.x binary compatibility 157 158## File systems. You probably need at least one of FFS or NFS. 159#file-system FFS # Berkeley Fast Filesystem 160file-system NFS # Sun NFS-compatible filesystem client 161file-system KERNFS # kernel data-structure filesystem 162file-system NULLFS # NULL layered filesystem 163file-system OVERLAY # overlay file system 164file-system MFS # memory-based filesystem 165file-system FDESC # user file descriptor filesystem 166file-system UMAPFS # uid/gid remapping filesystem 167#file-system LFS # Log-based filesystem (still experimental) 168file-system PORTAL # portal filesystem (still experimental) 169file-system PROCFS # /proc 170#file-system CD9660 # ISO 9660 + Rock Ridge file system 171#file-system UNION # union file system 172#file-system MSDOSFS # MS-DOS FAT filesystem(s). 173#file-system CODA # Coda File System; also needs vcoda (below) 174 175## File system options. 176#options NFSSERVER # Sun NFS-compatible filesystem server 177#options QUOTA # FFS quotas 178#options FFS_EI # FFS Endian Independent support 179#options SOFTDEP # FFS soft updates support. 180 181## Network protocol support. In most environments, INET is required. 182options INET # IP (Internet Protocol) v4 183options INET6 # IPV6 184#options IPSEC # IP security 185#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 186#options IPSEC_DEBUG # debug for IP security 187#options GATEWAY # packet forwarding ("router switch") 188#options MROUTING # packet forwarding of multicast packets 189#options DIRECTED_BROADCAST # allow broadcasts through routers 190options NS # Xerox NS networking 191#options NSIP # Xerox NS tunneling over IP 192options ISO,TPIP # OSI networking 193#options EON # OSI tunneling over IP 194#options CCITT,LLC,HDLC # X.25 packet switched protocol 195#options NETATALK # AppleTalk (over Ethernet) protocol 196options NTP # Network Time Protocol in-kernel support 197#options PPS_SYNC # Add serial line synchronization for NTP 198#options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 199#options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 200#options IPFILTER_DEFAULT_BLOCK # block all packets by default 201#options PPP_BSDCOMP # Add BSD compression to ppp device 202#options PPP_DEFLATE # Add deflate (libz) compression to ppp device 203#options PPP_FILTER # Add active filters for ppp (via bpf) 204 205 206 207#### Main bus and CPU .. all systems. 208mainbus0 at root 209cpu0 at mainbus0 210 211#### Bus types found on SPARC systems. 212 213obio0 at mainbus0 # sun4 and sun4m 214 215iommu0 at mainbus0 # sun4m 216sbus0 at iommu0 # sun4m 217 218 219#### Standard system devices -- all required for a given architecture 220 221## Auxiliary system registers on sun4c and sun4m 222auxreg0 at obio0 # sun4m 223 224## Mostek clock found on 4/300, sun4c, and sun4m systems. 225clock0 at obio0 # sun4m 226 227## Timer chip found on 4/300, sun4c, and sun4m systems. 228timer0 at obio0 # sun4m 229 230 231#### Serial port configuration 232 233## NS16x50 serial chips and clones. Present on the 234## Sun JavaStation-1 and Tadpole SPARCbook 3 235com0 at obio0 # sun4m 236 237 238#### Keyboard and mouse 239 240pckbc0 at obio0 241kbd0 at pckbc0 242ms0 at pckbc0 243 244 245#### Disk controllers and disks 246 247## A disk-like interface to files. Can be used to create floppy, CD, 248## miniroot images, etc. 249 250#pseudo-device vnd 4 251 252 253#### Network interfaces 254 255## LANCE Ethernet - an AMD 7990 LANCE behind specialized DMA glue 256ledma0 at sbus0 slot ? offset ? # sun4m on-board 257le0 at ledma0 # sun4m on-board 258 259 260## Loopback network interface; required 261pseudo-device loop 262 263## SLIP and CSLIP interfaces, for IP over a serial line. 264#pseudo-device sl 2 265 266## PPP, the successor to SLIP. See pppd(8). 267#pseudo-device ppp 2 268 269## PPP over Ethernet (RFC 2516) 270#pseudo-device pppoe 271 272## Network "tunnel" device, allowing protocol stacks to run in the userland. 273## This is used by the third-party user-mode "ppp" program, and others. 274#pseudo-device tun 4 275 276## Generic L3 over IP tunnel 277#pseudo-device gre 2 # generic L3 over IP tunnel 278 279## Berkeley Packet Filter, required to run RARPD. A generic C-language 280## interface that allows selective examining of incoming packets. 281pseudo-device bpfilter 8 282 283## IP Filter, used in firewall and NAT applications. See ipnat(8) for 284## one example of the use of the IP Filter. 285#pseudo-device ipfilter 286 287## for IPv6 288#pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 289#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 290#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 291 292## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 293#pseudo-device vlan 294 295#### Audio and video devices 296 297## /dev/audio support (`audiocs' plus `audio') 298## 299audiocs0 at sbus0 slot ? offset ? # SUNW,CS4231 300audio0 at audiocs0 301 302## Sun "tcx" accelerated color framebuffer. 303tcx0 at sbus? slot ? offset ? 304 305 306#### Other device configuration 307 308## Pseudo ttys, required for network logins and programs like screen. 309 310pseudo-device pty # pseudo-terminals 311 312## Random device, used to implement /dev/random (a source of random noise), 313## and generate randomness for some kernel formulae. 314 315pseudo-device rnd 316 317# a pseudo device needed for Coda # also needs CODA (above) 318#pseudo-device vcoda 4 # coda minicache <-> venus comm. 319 320pseudo-device clockctl # user control of clock subsystem 321pseudo-device ksyms # /dev/ksyms 322