KRUPS revision 1.75
1# $NetBSD: KRUPS,v 1.75 2017/09/14 07:58:43 mrg Exp $ 2# From: NetBSD: GENERIC,v 1.197 2006/12/04 23:43:35 elad Exp 3# 4# Krups (JavaStation-NC) machine description file 5# 6 7include "arch/sparc/conf/std.sparc" 8 9options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11#ident "KRUPS-$Revision: 1.75 $" 12 13maxusers 32 14 15## System kernel configuration. See options(4) for more detail. 16 17 18# Options for variants of the Sun SPARC architecure. 19# We currently support three architecture types; at least one is required. 20options SUN4M # sun4m - SS10, SS20, Classic, etc. 21 22# microSPARC-IIep is PCI based sun4m (JavaStation-NC, CP1200, etc) 23# This option selects if SUN4M means "normal" 4m or IIep. Kernels 24# with this option turned on will refuse to work on normal 4m. 25options MSIIEP # microSPARC-IIep 26 27# XXX: uwe: PROM location conflicts with kernel VA space !!! 28options PROM_AT_F0 29makeoptions TEXTADDR=E8004000 30 31 32## System options specific to the sparc machine type 33 34# Blink the power LED on some machines to indicate the system load. 35options BLINK 36 37 38#### System options that are the same for all ports 39 40## Root device configuration: change the ?'s if you are going to use a 41## nonstandard root partition (other than where the kernel is booted from) 42## and/or nonstandard root type (not ffs or nfs). Normally this can be 43## automagically determined at boot time. 44 45config netbsd root on ? type ? 46 47## System call tracing (see ktrace(1)). 48options KTRACE 49 50## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 51options SYSVMSG # System V message queues 52options SYSVSEM # System V semaphores 53#options SEMMNI=10 # number of semaphore identifiers 54#options SEMMNS=60 # number of semaphores in system 55#options SEMUME=10 # max number of undo entries per process 56#options SEMMNU=30 # number of undo structures in system 57options SYSVSHM # System V shared memory 58 59#options USERCONF # userconf(4) support 60#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 61options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 62 63## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 64options NFS_BOOT_BOOTPARAM 65#options NFS_BOOT_BOOTP 66options NFS_BOOT_DHCP 67 68 69#### wscons options 70 71# builtin terminal emulations 72#options WSEMUL_SUN # sun terminal emulation 73options WSEMUL_VT100 # VT100 / VT220 emulation 74options WSEMUL_DEFAULT="\"vt100\"" 75 76# customization of console and kernel output - see dev/wscons/wsdisplayvar.h 77options WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8) 78#options WS_DEFAULT_FG=WSCOL_WHITE 79#options WS_DEFAULT_BG=WSCOL_BLACK 80#options WS_DEFAULT_COLATTR="(0)" 81options WS_KERNEL_FG=WSCOL_GREEN 82#options WS_KERNEL_BG=WSCOL_BLACK 83options WS_KERNEL_COLATTR=WSATTR_HILIT 84 85# customization of console border color 86options WSDISPLAY_CUSTOM_BORDER # custom border colors via wsconsctl(8) 87#options WSDISPLAY_BORDER_COLOR=WSCOL_BLUE # default color 88 89# compatibility to other console drivers 90options WSDISPLAY_COMPAT_PCVT # emulate some ioctls 91options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 92options WSDISPLAY_COMPAT_USL # wsconscfg VT handling 93options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 94 95options FONT_GALLANT12x22 # PROM font look-alike 96 97#options WSKBD_EVENT_AUTOREPEAT # auto repeat in event mode 98#options WSKBD_USONLY # strip off non-US keymaps 99 100# see dev/pckbport/wskbdmap_mfii.c for implemented layouts 101#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 102 103# allocate a number of virtual screens at autoconfiguration time 104#options WSDISPLAY_DEFAULTSCREENS=4 105 106 107#### Debugging options 108 109## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 110## serial console break or keyboard reset, where the PROM would normally 111## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 112options DDB # kernel dynamic debugger 113options DDB_HISTORY_SIZE=100 # enable history editing in DDB 114#options DDB_ONPANIC=1 # see also sysctl(7): `ddb.onpanic' 115 116## You may also use gdb, on another computer connected to this machine over 117## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 118## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 119## the minor device number encodes the PROM enumeration of the serial ports, 120## i.e.: 121## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 122## (Note: ttyc and ttyd are available only on some sun4 models) 123#options KGDB # support for kernel gdb 124#options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 125#options KGDB_DEVRATE=38400 # baud rate 126 127 128## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 129## such that gdb(1) can be used on a kernel coredump. 130 131#makeoptions DEBUG="-g" 132makeoptions CPUFLAGS="-mcpu=supersparc" 133 134 135## Adds code to the kernel that does internal consistency checks, and will 136## cause the kernel to panic if corruption of internal data structures 137## is detected. 138#options DIAGNOSTIC # extra kernel sanity checking 139 140## Enable (possibly expensive) debugging code that may also display messages 141## on the system console 142#options DEBUG 143#options LOCKDEBUG 144#options SYSCALL_DEBUG 145 146options MIIVERBOSE # verbose PHY autoconfig messages 147 148## `INSECURE' turns off the kernel security level (securelevel = 0 always). 149## This allows writing to /dev/mem, loading kernel modules while multi-user, 150## and other insecurities good only for development work. Do not use this 151## option on a production machine. 152#options INSECURE 153 154## `FDSCRIPTS' allows non-readable but executable scripts by providing a 155## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 156## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 157## opaque file mechanism. Perl calls this "secure setuid scripts." 158 159#options FDSCRIPTS 160#options SETUIDSCRIPTS 161 162## Options for compatibility with previous releases foreign system binaries. 163## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 164## additional user-level utilities or system configuration files. See 165## compat_sunos(8) and compat_svr4(8). 166 167include "conf/compat_netbsd10.config" 168options COMPAT_SUNOS # SunOS 4.x binary compatibility 169#options COMPAT_SVR4 # SunOS 5.x binary compatibility 170 171## File systems. You probably need at least one of FFS or NFS. 172file-system FFS # Berkeley Fast Filesystem 173file-system NFS # Sun NFS-compatible filesystem client 174file-system KERNFS # kernel data-structure filesystem 175file-system NULLFS # NULL layered filesystem 176file-system OVERLAY # overlay file system 177file-system MFS # memory-based filesystem 178file-system FDESC # user file descriptor filesystem 179file-system UMAPFS # uid/gid remapping filesystem 180#file-system LFS # Log-based filesystem (still experimental) 181file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs) 182file-system PROCFS # /proc 183#file-system CD9660 # ISO 9660 + Rock Ridge file system 184file-system UNION # union file system 185#file-system MSDOSFS # MS-DOS FAT filesystem(s). 186#file-system CODA # Coda File System; also needs vcoda (below) 187file-system PTYFS # /dev/pts/N support 188#file-system TMPFS # Efficient memory file-system 189#file-system UDF # experimental - OSTA UDF CD/DVD file-system 190 191## File system options. 192#options NFSSERVER # Sun NFS-compatible filesystem server 193#options QUOTA # legacy UFS quotas 194#options QUOTA2 # new, in-filesystem UFS quotas 195#options FFS_EI # FFS Endian Independent support 196options FFS_NO_SNAPSHOT # No FFS snapshot support 197 198## Network protocol support. In most environments, INET is required. 199options INET # IP (Internet Protocol) v4 200options INET6 # IPV6 201#options IPSEC # IP security 202#options IPSEC_DEBUG # debug for IP security 203#options GATEWAY # packet forwarding ("router switch") 204#options MROUTING # packet forwarding of multicast packets 205#options PIM # Protocol Independent Multicast 206#options DIRECTED_BROADCAST # allow broadcasts through routers 207#options NETATALK # AppleTalk (over Ethernet) protocol 208options NTP # Network Time Protocol in-kernel support 209#options PPS_SYNC # Add serial line synchronization for NTP 210options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 211options IPFILTER_LOOKUP # ippool(8) support 212#options IPFILTER_DEFAULT_BLOCK # block all packets by default 213options PPP_BSDCOMP # Add BSD compression to ppp device 214options PPP_DEFLATE # Add deflate (libz) compression to ppp device 215options PPP_FILTER # Add active filters for ppp (via bpf) 216 217 218 219#### Main bus and CPU .. all systems. 220mainbus0 at root 221cpu0 at mainbus0 222 223#### Bus types found on SPARC systems. 224 225msiiep0 at mainbus0 # microSPARC-IIep PCIC, timer, ... 226 227mspcic0 at msiiep0 # PCI tree 228pci0 at mspcic0 229options PCIVERBOSE 230#options PCI_CONFIG_DUMP # hangs reading IGA1682 config past offset 64 231 232ebus* at pci? dev ? function ? # ebus devices 233 234 235#### Standard system devices -- all required for a given architecture 236 237# timer is part of ms-IIep PCIC 238timer0 at msiiep0 239 240## ds1287 TOD clock at EBus 241rtc* at ebus? 242 243#### Serial port configuration 244 245## NS16x50 serial chips and clones. 246com* at ebus? 247 248 249#### Disk controllers and disks 250 251## A disk-like interface to files. Can be used to create floppy, CD, 252## miniroot images, etc. 253 254#pseudo-device vnd 255#options VND_COMPRESSION # compressed vnd(4) 256 257## Memory disk device, used on boot floppies with compressed 258## kernel-plus-root-disk images. 259 260#pseudo-device md 261 262 263#### Network interfaces 264 265## Happy Meal Ethernet 266hme* at pci? dev ? function ? # network "hme" compatible 267 268# MII/PHY support 269qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 270 271## Loopback network interface; required 272pseudo-device loop 273 274## SLIP and CSLIP interfaces, for IP over a serial line. 275#pseudo-device sl 276 277## PPP, the successor to SLIP. See pppd(8). 278#pseudo-device ppp 279 280## PPP over Ethernet (RFC 2516) 281#pseudo-device pppoe 282 283## Network "tunnel" device, allowing protocol stacks to run in the userland. 284## This is used by the third-party user-mode "ppp" program, and others. 285#pseudo-device tun 286#pseudo-device tap # virtual Ethernet 287 288## Generic L3 over IP tunnel 289#pseudo-device gre # generic L3 over IP tunnel 290 291## Berkeley Packet Filter, required to run RARPD. A generic C-language 292## interface that allows selective examining of incoming packets. 293pseudo-device bpfilter 294 295#pseudo-device carp # Common Address Redundancy Protocol 296 297## IP Filter, used in firewall and NAT applications. See ipnat(8) for 298## one example of the use of the IP Filter. 299#pseudo-device ipfilter 300 301## for IPv6 302#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 303#pseudo-device faith # IPv[46] tcp relay translation i/f 304#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 305 306## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 307#pseudo-device vlan 308 309#### Audio and video devices 310 311## /dev/audio support 312audiocs* at ebus? # SUNW,CS4231 313audio* at audiocs? 314 315spkr* at audio? # PC speaker (synthesized) 316 317# wscons 318pckbc* at ebus? # PC keyboard controller 319pckbd* at pckbc? # PC keyboard 320pms* at pckbc? # PS/2 mouse for wsmouse 321igsfb* at pci? dev ? function ? 322wsdisplay* at igsfb? console ? 323wskbd* at pckbd? console ? 324wsmouse* at pms? mux 0 325 326 327#### Other device configuration 328 329## Pseudo ttys, required for network logins and programs like screen. 330 331pseudo-device pty # pseudo-terminals 332 333## Random device, used to implement /dev/random (a source of random noise), 334## and generate randomness for some kernel formulae. 335 336 337# a pseudo device needed for Coda # also needs CODA (above) 338#pseudo-device vcoda # coda minicache <-> venus comm. 339 340# wscons pseudo-devices 341pseudo-device wsmux # mouse & keyboard multiplexor 342pseudo-device wsfont 343 344pseudo-device clockctl # user control of clock subsystem 345pseudo-device ksyms # /dev/ksyms 346pseudo-device putter # for puffs and pud 347 348#pseudo-device pf # PF packet filter 349#pseudo-device pflog # PF log if 350#pseudo-device fss # file system snapshot device 351 352#options FILEASSOC # fileassoc(9) 353 # and PAX_SEGVGUARD 354 355# Veriexec 356# 357# a pseudo device needed for veriexec 358#pseudo-device veriexec 359# 360# Uncomment the fingerprint methods below that are desired. Note that 361# removing fingerprint methods will have almost no impact on the kernel 362# code size. 363# 364#options VERIFIED_EXEC_FP_SHA256 365#options VERIFIED_EXEC_FP_SHA384 366#options VERIFIED_EXEC_FP_SHA512 367 368#options PAX_MPROTECT=0 # PaX mprotect(2) restrictions 369 # (for static binaries only for now) 370