KRUPS revision 1.64
1# $NetBSD: KRUPS,v 1.64 2013/06/05 23:08:03 christos Exp $ 2# From: NetBSD: GENERIC,v 1.197 2006/12/04 23:43:35 elad Exp 3# 4# Krups (JavaStation-NC) machine description file 5# 6 7include "arch/sparc/conf/std.sparc" 8 9options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11#ident "KRUPS-$Revision: 1.64 $" 12 13maxusers 32 14 15## System kernel configuration. See options(4) for more detail. 16 17 18# Options for variants of the Sun SPARC architecure. 19# We currently support three architecture types; at least one is required. 20options SUN4M # sun4m - SS10, SS20, Classic, etc. 21 22# microSPARC-IIep is PCI based sun4m (JavaStation-NC, CP1200, etc) 23# This option selects if SUN4M means "normal" 4m or IIep. Kernels 24# with this option turned on will refuse to work on normal 4m. 25options MSIIEP # microSPARC-IIep 26 27# XXX: uwe: PROM location conflicts with kernel VA space !!! 28options PROM_AT_F0 29makeoptions TEXTADDR=E8004000 30 31 32## System options specific to the sparc machine type 33 34# Blink the power LED on some machines to indicate the system load. 35options BLINK 36 37 38#### System options that are the same for all ports 39 40## Root device configuration: change the ?'s if you are going to use a 41## nonstandard root partition (other than where the kernel is booted from) 42## and/or nonstandard root type (not ffs or nfs). Normally this can be 43## automagically determined at boot time. 44 45config netbsd root on ? type ? 46 47## System call tracing (see ktrace(1)). 48options KTRACE 49 50## Collect statistics on kernel malloc's and free's. This does have a 51## significant performance hit on slower machines, so it is intended for 52## diagnostic use only. 53#options KMEMSTATS 54 55## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 56options SYSVMSG # System V message queues 57options SYSVSEM # System V semaphores 58#options SEMMNI=10 # number of semaphore identifiers 59#options SEMMNS=60 # number of semaphores in system 60#options SEMUME=10 # max number of undo entries per process 61#options SEMMNU=30 # number of undo structures in system 62options SYSVSHM # System V shared memory 63 64#options USERCONF # userconf(4) support 65#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 66options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 67 68## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 69options NFS_BOOT_BOOTPARAM 70#options NFS_BOOT_BOOTP 71options NFS_BOOT_DHCP 72 73 74#### wscons options 75 76# builtin terminal emulations 77#options WSEMUL_SUN # sun terminal emulation 78options WSEMUL_VT100 # VT100 / VT220 emulation 79options WSEMUL_DEFAULT="\"vt100\"" 80 81# customization of console and kernel output - see dev/wscons/wsdisplayvar.h 82options WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8) 83#options WS_DEFAULT_FG=WSCOL_WHITE 84#options WS_DEFAULT_BG=WSCOL_BLACK 85#options WS_DEFAULT_COLATTR="(0)" 86options WS_KERNEL_FG=WSCOL_GREEN 87#options WS_KERNEL_BG=WSCOL_BLACK 88options WS_KERNEL_COLATTR=WSATTR_HILIT 89 90# customization of console border color 91options WSDISPLAY_CUSTOM_BORDER # custom border colors via wsconsctl(8) 92#options WSDISPLAY_BORDER_COLOR=WSCOL_BLUE # default color 93 94# compatibility to other console drivers 95options WSDISPLAY_COMPAT_PCVT # emulate some ioctls 96options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 97options WSDISPLAY_COMPAT_USL # wsconscfg VT handling 98options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 99 100options FONT_GALLANT12x22 # PROM font look-alike 101 102#options WSKBD_EVENT_AUTOREPEAT # auto repeat in event mode 103#options WSKBD_USONLY # strip off non-US keymaps 104 105# see dev/pckbport/wskbdmap_mfii.c for implemented layouts 106#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 107 108# allocate a number of virtual screens at autoconfiguration time 109#options WSDISPLAY_DEFAULTSCREENS=4 110 111 112#### Debugging options 113 114## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 115## serial console break or keyboard reset, where the PROM would normally 116## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 117options DDB # kernel dynamic debugger 118options DDB_HISTORY_SIZE=100 # enable history editing in DDB 119#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 120 121## You may also use gdb, on another computer connected to this machine over 122## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 123## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 124## the minor device number encodes the PROM enumeration of the serial ports, 125## i.e.: 126## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 127## (Note: ttyc and ttyd are available only on some sun4 models) 128#options KGDB # support for kernel gdb 129#options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 130#options KGDB_DEVRATE=38400 # baud rate 131 132 133## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 134## such that gdb(1) can be used on a kernel coredump. 135 136#makeoptions DEBUG="-g" 137makeoptions CPUFLAGS="-mcpu=supersparc" 138 139 140## Adds code to the kernel that does internal consistency checks, and will 141## cause the kernel to panic if corruption of internal data structures 142## is detected. 143#options DIAGNOSTIC # extra kernel sanity checking 144 145## Enable (possibly expensive) debugging code that may also display messages 146## on the system console 147#options DEBUG 148#options LOCKDEBUG 149#options SYSCALL_DEBUG 150 151options MIIVERBOSE # verbose PHY autoconfig messages 152 153## `INSECURE' turns off the kernel security level (securelevel = 0 always). 154## This allows writing to /dev/mem, loading kernel modules while multi-user, 155## and other insecurities good only for development work. Do not use this 156## option on a production machine. 157#options INSECURE 158 159## `FDSCRIPTS' allows non-readable but executable scripts by providing a 160## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 161## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 162## opaque file mechanism. Perl calls this "secure setuid scripts." 163 164#options FDSCRIPTS 165#options SETUIDSCRIPTS 166 167## Options for compatibility with previous releases foreign system binaries. 168## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 169## additional user-level utilities or system configuration files. See 170## compat_sunos(8) and compat_svr4(8). 171 172options COMPAT_43 # 4.3BSD system interfaces 173options COMPAT_10 # NetBSD 1.0 binary compatibility 174options COMPAT_11 # NetBSD 1.1 binary compatibility 175options COMPAT_12 # NetBSD 1.2 binary compatibility 176options COMPAT_13 # NetBSD 1.3 binary compatibility 177options COMPAT_14 # NetBSD 1.4 binary compatibility 178options COMPAT_15 # NetBSD 1.5 binary compatibility 179options COMPAT_16 # NetBSD 1.6 binary compatibility 180options COMPAT_20 # NetBSD 2.0 binary compatibility 181options COMPAT_30 # NetBSD 3.0 binary compatibility 182options COMPAT_40 # NetBSD 4.0 binary compatibility 183options COMPAT_SUNOS # SunOS 4.x binary compatibility 184options COMPAT_SVR4 # SunOS 5.x binary compatibility 185options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 186 187## File systems. You probably need at least one of FFS or NFS. 188file-system FFS # Berkeley Fast Filesystem 189file-system NFS # Sun NFS-compatible filesystem client 190file-system KERNFS # kernel data-structure filesystem 191file-system NULLFS # NULL layered filesystem 192file-system OVERLAY # overlay file system 193file-system MFS # memory-based filesystem 194file-system FDESC # user file descriptor filesystem 195file-system UMAPFS # uid/gid remapping filesystem 196#file-system LFS # Log-based filesystem (still experimental) 197file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs) 198file-system PROCFS # /proc 199#file-system CD9660 # ISO 9660 + Rock Ridge file system 200file-system UNION # union file system 201#file-system MSDOSFS # MS-DOS FAT filesystem(s). 202#file-system CODA # Coda File System; also needs vcoda (below) 203file-system PTYFS # /dev/pts/N support 204#file-system TMPFS # Efficient memory file-system 205#file-system UDF # experimental - OSTA UDF CD/DVD file-system 206 207## File system options. 208#options NFSSERVER # Sun NFS-compatible filesystem server 209#options QUOTA # legacy UFS quotas 210#options QUOTA2 # new, in-filesystem UFS quotas 211#options FFS_EI # FFS Endian Independent support 212options FFS_NO_SNAPSHOT # No FFS snapshot support 213 214## Network protocol support. In most environments, INET is required. 215options INET # IP (Internet Protocol) v4 216options INET6 # IPV6 217#options IPSEC # IP security 218#options IPSEC_DEBUG # debug for IP security 219#options GATEWAY # packet forwarding ("router switch") 220#options MROUTING # packet forwarding of multicast packets 221#options PIM # Protocol Independent Multicast 222#options DIRECTED_BROADCAST # allow broadcasts through routers 223#options NETATALK # AppleTalk (over Ethernet) protocol 224options NTP # Network Time Protocol in-kernel support 225#options PPS_SYNC # Add serial line synchronization for NTP 226options PFIL_HOOKS # Add pfil(9) packet filter hooks 227options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 228options IPFILTER_LOOKUP # ippool(8) support 229#options IPFILTER_DEFAULT_BLOCK # block all packets by default 230options PPP_BSDCOMP # Add BSD compression to ppp device 231options PPP_DEFLATE # Add deflate (libz) compression to ppp device 232options PPP_FILTER # Add active filters for ppp (via bpf) 233 234 235 236#### Main bus and CPU .. all systems. 237mainbus0 at root 238cpu0 at mainbus0 239 240#### Bus types found on SPARC systems. 241 242msiiep0 at mainbus0 # microSPARC-IIep PCIC, timer, ... 243 244mspcic0 at msiiep0 # PCI tree 245pci0 at mspcic0 246options PCIVERBOSE 247#options PCI_CONFIG_DUMP # hangs reading IGA1682 config past offset 64 248 249ebus* at pci? dev ? function ? # ebus devices 250 251 252#### Standard system devices -- all required for a given architecture 253 254# timer is part of ms-IIep PCIC 255timer0 at msiiep0 256 257## ds1287 TOD clock at EBus 258rtc* at ebus? 259 260#### Serial port configuration 261 262## NS16x50 serial chips and clones. 263com* at ebus? 264 265 266#### Disk controllers and disks 267 268## A disk-like interface to files. Can be used to create floppy, CD, 269## miniroot images, etc. 270 271#pseudo-device vnd 272#options VND_COMPRESSION # compressed vnd(4) 273 274## Memory disk device, used on boot floppies with compressed 275## kernel-plus-root-disk images. 276 277#pseudo-device md 278 279 280#### Network interfaces 281 282## Happy Meal Ethernet 283hme* at pci? dev ? function ? # network "hme" compatible 284 285# MII/PHY support 286qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 287 288## Loopback network interface; required 289pseudo-device loop 290 291## SLIP and CSLIP interfaces, for IP over a serial line. 292#pseudo-device sl 293 294## PPP, the successor to SLIP. See pppd(8). 295#pseudo-device ppp 296 297## PPP over Ethernet (RFC 2516) 298#pseudo-device pppoe 299 300## Network "tunnel" device, allowing protocol stacks to run in the userland. 301## This is used by the third-party user-mode "ppp" program, and others. 302#pseudo-device tun 303#pseudo-device tap # virtual Ethernet 304 305## Generic L3 over IP tunnel 306#pseudo-device gre # generic L3 over IP tunnel 307 308## Berkeley Packet Filter, required to run RARPD. A generic C-language 309## interface that allows selective examining of incoming packets. 310pseudo-device bpfilter 311 312#pseudo-device carp # Common Address Redundancy Protocol 313 314## IP Filter, used in firewall and NAT applications. See ipnat(8) for 315## one example of the use of the IP Filter. 316#pseudo-device ipfilter 317 318## for IPv6 319#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 320#pseudo-device faith # IPv[46] tcp relay translation i/f 321#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 322 323## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 324#pseudo-device vlan 325 326#### Audio and video devices 327 328## /dev/audio support 329audiocs* at ebus? # SUNW,CS4231 330audio* at audiocs? 331 332# wscons 333pckbc* at ebus? # PC keyboard controller 334pckbd* at pckbc? # PC keyboard 335pms* at pckbc? # PS/2 mouse for wsmouse 336igsfb* at pci? dev ? function ? 337wsdisplay* at igsfb? console ? 338wskbd* at pckbd? console ? 339wsmouse* at pms? mux 0 340 341 342#### Other device configuration 343 344## Pseudo ttys, required for network logins and programs like screen. 345 346pseudo-device pty # pseudo-terminals 347 348## Random device, used to implement /dev/random (a source of random noise), 349## and generate randomness for some kernel formulae. 350 351 352# a pseudo device needed for Coda # also needs CODA (above) 353#pseudo-device vcoda # coda minicache <-> venus comm. 354 355# wscons pseudo-devices 356pseudo-device wsmux # mouse & keyboard multiplexor 357pseudo-device wsfont 358 359pseudo-device clockctl # user control of clock subsystem 360pseudo-device ksyms # /dev/ksyms 361pseudo-device putter # for puffs and pud 362 363#pseudo-device pf # PF packet filter 364#pseudo-device pflog # PF log if 365#pseudo-device fss # file system snapshot device 366 367#options FILEASSOC # fileassoc(9) 368 369# Veriexec 370# 371# a pseudo device needed for veriexec 372#pseudo-device veriexec 373# 374# Uncomment the fingerprint methods below that are desired. Note that 375# removing fingerprint methods will have almost no impact on the kernel 376# code size. 377# 378#options VERIFIED_EXEC_FP_RMD160 379#options VERIFIED_EXEC_FP_SHA256 380#options VERIFIED_EXEC_FP_SHA384 381#options VERIFIED_EXEC_FP_SHA512 382#options VERIFIED_EXEC_FP_SHA1 383#options VERIFIED_EXEC_FP_MD5 384 385#options PAX_MPROTECT=0 # PaX mprotect(2) restrictions 386 # (for static binaries only for now) 387