KRUPS revision 1.6
1# $NetBSD: KRUPS,v 1.6 2002/04/12 08:11:20 gmcgarry Exp $ 2# From: NetBSD: GENERIC,v 1.131 2002/02/10 17:37:02 wiz Exp 3# 4# Krups (JavaStation 10, aka JavaStation NC) machine description file 5# 6# XXX: This config is experimental and will not work without some 7# additional patches not yet committed to the tree. 8 9include "arch/sparc/conf/std.sparc" 10 11#ident "KRUPS-$Revision: 1.6 $" 12 13maxusers 32 14 15## System kernel configuration. See options(4) for more detail. 16 17 18# Options for variants of the Sun SPARC architecure. 19# We currently support three architecture types; at least one is required. 20options SUN4M # sun4m - SS10, SS20, Classic, etc. 21 22# microSPARC-IIep is PCI based sun4m (JavaStation 10, CP1200, etc) 23# This option selects if SUN4M means "normal" 4m or IIep. Kernels 24# with this option turned on will refuse to work on normal 4m. 25options MSIIEP # microSPARC-IIep 26 27# XXX: uwe: PROM location conflicts with kernel VA space !!! 28makeoptions TEXTADDR=E8004000 29 30 31## System options specific to the sparc machine type 32 33# XXX: uwe: to do 34# Blink the power LED on some machines to indicate the system load. 35#options BLINK 36 37 38#### System options that are the same for all ports 39 40## Root device configuration: change the ?'s if you are going to use a 41## nonstandard root partition (other than where the kernel is booted from) 42## and/or nonstandard root type (not ffs or nfs). Normally this can be 43## automagically determined at boot time. 44 45config netbsd root on ? type ? 46 47## System call tracing (see ktrace(1)). 48options KTRACE 49 50## Collect statistics on kernel malloc's and free's. This does have a 51## significant performance hit on slower machines, so it is intended for 52## diagnostic use only. 53#options KMEMSTATS 54 55## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 56#options SYSVMSG # System V message queues 57#options SYSVSEM # System V semaphores 58#options SEMMNI=10 # number of semaphore identifiers 59#options SEMMNS=60 # number of semaphores in system 60#options SEMUME=10 # max number of undo entries per process 61#options SEMMNU=30 # number of undo structures in system 62#options SYSVSHM # System V shared memory 63#options SHMMAXPGS=1024 # 1024 pages is the default 64 65## Loadable kernel module support; still under development. 66#options LKM 67 68#options USERCONF # userconf(4) support 69#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 70 71## NFS boot options; default on sparc is the bootparam protocol 72options NFS_BOOT_BOOTPARAM 73#options NFS_BOOT_BOOTP 74#options NFS_BOOT_DHCP 75 76#### Debugging options 77 78## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 79## serial console break or keyboard reset, where the PROM would normally 80## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 81options DDB # kernel dynamic debugger 82options DDB_HISTORY_SIZE=100 # enable history editing in DDB 83options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 84 85## You may also use gdb, on another computer connected to this machine over 86## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 87## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 88## the minor device number encodes the PROM enumeration of the serial ports, 89## i.e.: 90## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 91## (Note: ttyc and ttyd are available only on some sun4 models) 92#options KGDB # support for kernel gdb 93#options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 94#options KGDB_DEVRATE=38400 # baud rate 95 96 97## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 98## such that gdb(1) can be used on a kernel coredump. 99 100#makeoptions DEBUG="-g" 101makeoptions COPTS="-pipe -mcpu=supersparc -O2" 102 103 104## Adds code to the kernel that does internal consistency checks, and will 105## cause the kernel to panic if corruption of internal data structures 106## is detected. 107options DIAGNOSTIC # extra kernel sanity checking 108 109## Enable (possibly expensive) debugging code that may also display messages 110## on the system console 111#options DEBUG 112 113options MIIVERBOSE # verbose PHY autoconfig messages 114 115## `INSECURE' turns off the kernel security level (securelevel = 0 always). 116## This allows writing to /dev/mem, loading kernel modules while multi-user, 117## and other insecurities good only for development work. Do not use this 118## option on a production machine. 119#options INSECURE 120 121## Allow non-root users to grab /dev/console with programs such as xconsole. 122## `xconsole' therefore does not need setuid root with this option enabled. 123#options UCONSOLE 124 125## `FDSCRIPTS' allows non-readable but executable scripts by providing a 126## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 127## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 128## opaque file mechanism. Perl calls this "secure setuid scripts." 129 130#options FDSCRIPTS 131#options SETUIDSCRIPTS 132 133## Options for compatibility with previous releases foreign system binaries. 134## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 135## additional user-level utilities or system configuration files. See 136## compat_sunos(8) and compat_svr4(8). 137 138options COMPAT_43 # 4.3BSD system interfaces 139#options COMPAT_10 # NetBSD 1.0 binary compatibility 140#options COMPAT_11 # NetBSD 1.1 binary compatibility 141#options COMPAT_12 # NetBSD 1.2 binary compatibility 142#options COMPAT_13 # NetBSD 1.3 binary compatibility 143#options COMPAT_14 # NetBSD 1.4 binary compatibility 144#options COMPAT_SUNOS # SunOS 4.x binary compatibility 145#options COMPAT_SVR4 # SunOS 5.x binary compatibility 146 147## File systems. You probably need at least one of FFS or NFS. 148#file-system FFS # Berkeley Fast Filesystem 149file-system NFS # Sun NFS-compatible filesystem client 150file-system KERNFS # kernel data-structure filesystem 151#file-system NULLFS # NULL layered filesystem 152#file-system OVERLAY # overlay file system 153#file-system MFS # memory-based filesystem 154#file-system FDESC # user file descriptor filesystem 155#file-system UMAPFS # uid/gid remapping filesystem 156#file-system LFS # Log-based filesystem (still experimental) 157#file-system PORTAL # portal filesystem (still experimental) 158file-system PROCFS # /proc 159#file-system CD9660 # ISO 9660 + Rock Ridge file system 160#file-system UNION # union file system 161#file-system MSDOSFS # MS-DOS FAT filesystem(s). 162#file-system CODA # Coda File System; also needs vcoda (below) 163 164## File system options. 165#options NFSSERVER # Sun NFS-compatible filesystem server 166#options QUOTA # FFS quotas 167#options FFS_EI # FFS Endian Independent support 168#options SOFTDEP # FFS soft updates support. 169 170## Network protocol support. In most environments, INET is required. 171options INET # IP (Internet Protocol) v4 172#options INET6 # IPV6 173#options IPSEC # IP security 174#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 175#options IPSEC_DEBUG # debug for IP security 176#options GATEWAY # packet forwarding ("router switch") 177#options MROUTING # packet forwarding of multicast packets 178#options DIRECTED_BROADCAST # allow broadcasts through routers 179#options NS # Xerox NS networking 180#options NSIP # Xerox NS tunneling over IP 181#options ISO,TPIP # OSI networking 182#options EON # OSI tunneling over IP 183#options CCITT,LLC,HDLC # X.25 packet switched protocol 184#options NETATALK # AppleTalk (over Ethernet) protocol 185#options NTP # Network Time Protocol in-kernel support 186#options PPS_SYNC # Add serial line synchronization for NTP 187#options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 188#options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 189#options PPP_BSDCOMP # Add BSD compression to ppp device 190#options PPP_DEFLATE # Add deflate (libz) compression to ppp device 191#options PPP_FILTER # Add active filters for ppp (via bpf) 192 193 194 195#### Main bus and CPU .. all systems. 196mainbus0 at root 197cpu0 at mainbus0 198 199#### Bus types found on SPARC systems. 200 201msiiep0 at mainbus0 # microSPARC-IIep PCIC, timer, ... 202 203mspcic0 at msiiep0 # PCI tree 204pci0 at mspcic0 205options PCIVERBOSE 206#options PCI_CONFIG_DUMP # hangs reading IGA1682 config past offset 64 207 208ebus0 at pci0 # ebus devices 209 210 211#### Standard system devices -- all required for a given architecture 212 213# timer is part of ms-IIep PCIC 214timer0 at msiiep0 215 216## ds1287 TOD clock at EBus 217rtc0 at ebus0 218 219#### Serial port configuration 220 221# XXX: uwe: needs a work-around applied to comstart() 222## NS16x50 serial chips and clones. 223com* at ebus0 224 225 226#### Disk controllers and disks 227 228## A disk-like interface to files. Can be used to create floppy, CD, 229## miniroot images, etc. 230 231#pseudo-device vnd 4 232 233## Memory disk device, used on boot floppies with compressed 234## kernel-plus-root-disk images. 235 236#pseudo-device md 1 237 238 239#### Network interfaces 240 241## Happy Meal Ethernet 242hme* at pci? dev ? function ? # network "hme" compatible 243 244# MII/PHY support 245qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 246 247## Loopback network interface; required 248pseudo-device loop 249 250## SLIP and CSLIP interfaces, for IP over a serial line. 251#pseudo-device sl 2 252 253## PPP, the successor to SLIP. See pppd(8). 254#pseudo-device ppp 2 255 256## PPP over Ethernet (RFC 2516) 257#pseudo-device pppoe 258 259## Network "tunnel" device, allowing protocol stacks to run in the userland. 260## This is used by the third-party user-mode "ppp" program, and others. 261#pseudo-device tun 4 262 263## Generic L3 over IP tunnel 264#pseudo-device gre 2 # generic L3 over IP tunnel 265 266## Berkeley Packet Filter, required to run RARPD. A generic C-language 267## interface that allows selective examining of incoming packets. 268pseudo-device bpfilter 8 269 270## IP Filter, used in firewall and NAT applications. See ipnat(8) for 271## one example of the use of the IP Filter. 272#pseudo-device ipfilter 273 274## for IPv6 275#pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 276#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 277#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 278 279## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 280#pseudo-device vlan 281 282#### Audio and video devices 283 284## /dev/audio support 285audiocs0 at ebus? # SUNW,CS4231 286audio* at audiocs0 287 288 289#### Other device configuration 290 291## Pseudo ttys, required for network logins and programs like screen. 292 293pseudo-device pty # pseudo-terminals 294 295## Random device, used to implement /dev/random (a source of random noise), 296## and generate randomness for some kernel formulae. 297 298pseudo-device rnd 299 300# a pseudo device needed for Coda # also needs CODA (above) 301#pseudo-device vcoda 4 # coda minicache <-> venus comm. 302