KRUPS revision 1.48
1# $NetBSD: KRUPS,v 1.48 2009/02/08 13:05:51 jdc Exp $ 2# From: NetBSD: GENERIC,v 1.197 2006/12/04 23:43:35 elad Exp 3# 4# Krups (JavaStation-NC) machine description file 5# 6 7include "arch/sparc/conf/std.sparc" 8 9options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11#ident "KRUPS-$Revision: 1.48 $" 12 13maxusers 32 14 15## System kernel configuration. See options(4) for more detail. 16 17 18# Options for variants of the Sun SPARC architecure. 19# We currently support three architecture types; at least one is required. 20options SUN4M # sun4m - SS10, SS20, Classic, etc. 21 22# microSPARC-IIep is PCI based sun4m (JavaStation-NC, CP1200, etc) 23# This option selects if SUN4M means "normal" 4m or IIep. Kernels 24# with this option turned on will refuse to work on normal 4m. 25options MSIIEP # microSPARC-IIep 26 27# XXX: uwe: PROM location conflicts with kernel VA space !!! 28options PROM_AT_F0 29makeoptions TEXTADDR=E8004000 30 31 32## System options specific to the sparc machine type 33 34# Blink the power LED on some machines to indicate the system load. 35options BLINK 36 37 38#### System options that are the same for all ports 39 40## Root device configuration: change the ?'s if you are going to use a 41## nonstandard root partition (other than where the kernel is booted from) 42## and/or nonstandard root type (not ffs or nfs). Normally this can be 43## automagically determined at boot time. 44 45config netbsd root on ? type ? 46 47## System call tracing (see ktrace(1)). 48options KTRACE 49 50## Collect statistics on kernel malloc's and free's. This does have a 51## significant performance hit on slower machines, so it is intended for 52## diagnostic use only. 53#options KMEMSTATS 54 55## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 56options SYSVMSG # System V message queues 57options SYSVSEM # System V semaphores 58#options SEMMNI=10 # number of semaphore identifiers 59#options SEMMNS=60 # number of semaphores in system 60#options SEMUME=10 # max number of undo entries per process 61#options SEMMNU=30 # number of undo structures in system 62options SYSVSHM # System V shared memory 63#options SHMMAXPGS=1024 # 1024 pages is the default 64options P1003_1B_SEMAPHORE # p1003.1b semaphore support 65 66## Loadable kernel module support; still under development. 67 68#options USERCONF # userconf(4) support 69#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 70options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 71 72## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 73options NFS_BOOT_BOOTPARAM 74#options NFS_BOOT_BOOTP 75options NFS_BOOT_DHCP 76 77 78#### wscons options 79 80# builtin terminal emulations 81options WSEMUL_SUN # sun terminal emulation 82options WSEMUL_VT100 # VT100 / VT220 emulation 83options WSEMUL_DEFAULT="\"vt100\"" 84 85# customization of console and kernel output - see dev/wscons/wsdisplayvar.h 86options WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8) 87#options WS_DEFAULT_FG=WSCOL_WHITE 88#options WS_DEFAULT_BG=WSCOL_BLACK 89#options WS_DEFAULT_COLATTR="(0)" 90options WS_KERNEL_FG=WSCOL_GREEN 91#options WS_KERNEL_BG=WSCOL_BLACK 92options WS_KERNEL_COLATTR=WSATTR_HILIT 93 94# customization of console border color 95options WSDISPLAY_CUSTOM_BORDER # custom border colors via wsconsctl(8) 96#options WSDISPLAY_BORDER_COLOR=WSCOL_BLUE # default color 97 98# compatibility to other console drivers 99options WSDISPLAY_COMPAT_PCVT # emulate some ioctls 100options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 101options WSDISPLAY_COMPAT_USL # VT handling 102options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 103 104options FONT_GALLANT12x22 # PROM font look-alike 105 106#options WSKBD_EVENT_AUTOREPEAT # auto repeat in event mode 107#options WSKBD_USONLY # strip off non-US keymaps 108 109# see dev/pckbport/wskbdmap_mfii.c for implemented layouts 110#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 111 112# allocate a number of virtual screens at autoconfiguration time 113#options WSDISPLAY_DEFAULTSCREENS=4 114 115 116#### Debugging options 117 118## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 119## serial console break or keyboard reset, where the PROM would normally 120## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 121#options DDB # kernel dynamic debugger 122#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 123#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 124 125## You may also use gdb, on another computer connected to this machine over 126## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 127## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 128## the minor device number encodes the PROM enumeration of the serial ports, 129## i.e.: 130## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 131## (Note: ttyc and ttyd are available only on some sun4 models) 132#options KGDB # support for kernel gdb 133#options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 134#options KGDB_DEVRATE=38400 # baud rate 135 136 137## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 138## such that gdb(1) can be used on a kernel coredump. 139 140#makeoptions DEBUG="-g" 141makeoptions CPUFLAGS="-mcpu=supersparc" 142 143 144## Adds code to the kernel that does internal consistency checks, and will 145## cause the kernel to panic if corruption of internal data structures 146## is detected. 147#options DIAGNOSTIC # extra kernel sanity checking 148 149## Enable (possibly expensive) debugging code that may also display messages 150## on the system console 151#options DEBUG 152 153options MIIVERBOSE # verbose PHY autoconfig messages 154 155## `INSECURE' turns off the kernel security level (securelevel = 0 always). 156## This allows writing to /dev/mem, loading kernel modules while multi-user, 157## and other insecurities good only for development work. Do not use this 158## option on a production machine. 159#options INSECURE 160 161## `FDSCRIPTS' allows non-readable but executable scripts by providing a 162## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 163## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 164## opaque file mechanism. Perl calls this "secure setuid scripts." 165 166#options FDSCRIPTS 167#options SETUIDSCRIPTS 168 169## Options for compatibility with previous releases foreign system binaries. 170## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 171## additional user-level utilities or system configuration files. See 172## compat_sunos(8) and compat_svr4(8). 173 174options COMPAT_43 # 4.3BSD system interfaces 175options COMPAT_10 # NetBSD 1.0 binary compatibility 176options COMPAT_11 # NetBSD 1.1 binary compatibility 177options COMPAT_12 # NetBSD 1.2 binary compatibility 178options COMPAT_13 # NetBSD 1.3 binary compatibility 179options COMPAT_14 # NetBSD 1.4 binary compatibility 180options COMPAT_15 # NetBSD 1.5 binary compatibility 181options COMPAT_16 # NetBSD 1.6 binary compatibility 182options COMPAT_20 # NetBSD 2.0 binary compatibility 183options COMPAT_30 # NetBSD 3.0 binary compatibility 184options COMPAT_40 # NetBSD 4.0 binary compatibility 185options COMPAT_SUNOS # SunOS 4.x binary compatibility 186options COMPAT_SVR4 # SunOS 5.x binary compatibility 187options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 188 189## File systems. You probably need at least one of FFS or NFS. 190file-system FFS # Berkeley Fast Filesystem 191file-system NFS # Sun NFS-compatible filesystem client 192file-system KERNFS # kernel data-structure filesystem 193file-system NULLFS # NULL layered filesystem 194file-system OVERLAY # overlay file system 195file-system MFS # memory-based filesystem 196file-system FDESC # user file descriptor filesystem 197file-system UMAPFS # uid/gid remapping filesystem 198#file-system LFS # Log-based filesystem (still experimental) 199file-system PORTAL # portal filesystem (still experimental) 200file-system PROCFS # /proc 201#file-system CD9660 # ISO 9660 + Rock Ridge file system 202file-system UNION # union file system 203#file-system MSDOSFS # MS-DOS FAT filesystem(s). 204#file-system CODA # Coda File System; also needs vcoda (below) 205file-system PTYFS # /dev/pts/N support 206#file-system TMPFS # Efficient memory file-system 207#file-system UDF # experimental - OSTA UDF CD/DVD file-system 208 209## File system options. 210#options NFSSERVER # Sun NFS-compatible filesystem server 211#options QUOTA # FFS quotas 212#options FFS_EI # FFS Endian Independent support 213options FFS_NO_SNAPSHOT # No FFS snapshot support 214 215## Network protocol support. In most environments, INET is required. 216options INET # IP (Internet Protocol) v4 217options INET6 # IPV6 218#options IPSEC # IP security 219#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 220#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 221#options IPSEC_DEBUG # debug for IP security 222#options GATEWAY # packet forwarding ("router switch") 223#options MROUTING # packet forwarding of multicast packets 224#options PIM # Protocol Independent Multicast 225#options DIRECTED_BROADCAST # allow broadcasts through routers 226options ISO,TPIP # OSI networking 227#options EON # OSI tunneling over IP 228#options NETATALK # AppleTalk (over Ethernet) protocol 229options NTP # Network Time Protocol in-kernel support 230#options PPS_SYNC # Add serial line synchronization for NTP 231options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 232options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 233options IPFILTER_LOOKUP # ippool(8) support 234#options IPFILTER_DEFAULT_BLOCK # block all packets by default 235options PPP_BSDCOMP # Add BSD compression to ppp device 236options PPP_DEFLATE # Add deflate (libz) compression to ppp device 237options PPP_FILTER # Add active filters for ppp (via bpf) 238 239 240 241#### Main bus and CPU .. all systems. 242mainbus0 at root 243cpu0 at mainbus0 244 245#### Bus types found on SPARC systems. 246 247msiiep0 at mainbus0 # microSPARC-IIep PCIC, timer, ... 248 249mspcic0 at msiiep0 # PCI tree 250pci0 at mspcic0 251options PCIVERBOSE 252#options PCI_CONFIG_DUMP # hangs reading IGA1682 config past offset 64 253 254ebus* at pci? dev ? function ? # ebus devices 255 256 257#### Standard system devices -- all required for a given architecture 258 259# timer is part of ms-IIep PCIC 260timer0 at msiiep0 261 262## ds1287 TOD clock at EBus 263rtc* at ebus? 264 265#### Serial port configuration 266 267## NS16x50 serial chips and clones. 268com* at ebus? 269 270 271#### Disk controllers and disks 272 273## A disk-like interface to files. Can be used to create floppy, CD, 274## miniroot images, etc. 275 276#pseudo-device vnd 277#options VND_COMPRESSION # compressed vnd(4) 278 279## Memory disk device, used on boot floppies with compressed 280## kernel-plus-root-disk images. 281 282#pseudo-device md 1 283 284 285#### Network interfaces 286 287## Happy Meal Ethernet 288hme* at pci? dev ? function ? # network "hme" compatible 289 290# MII/PHY support 291qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 292 293## Loopback network interface; required 294pseudo-device loop 295 296## SLIP and CSLIP interfaces, for IP over a serial line. 297#pseudo-device sl 298 299## PPP, the successor to SLIP. See pppd(8). 300#pseudo-device ppp 301 302## PPP over Ethernet (RFC 2516) 303#pseudo-device pppoe 304 305## Network "tunnel" device, allowing protocol stacks to run in the userland. 306## This is used by the third-party user-mode "ppp" program, and others. 307#pseudo-device tun 308#pseudo-device tap # virtual Ethernet 309 310## Generic L3 over IP tunnel 311#pseudo-device gre # generic L3 over IP tunnel 312 313## Berkeley Packet Filter, required to run RARPD. A generic C-language 314## interface that allows selective examining of incoming packets. 315pseudo-device bpfilter 316 317#pseudo-device carp # Common Address Redundancy Protocol 318 319## IP Filter, used in firewall and NAT applications. See ipnat(8) for 320## one example of the use of the IP Filter. 321#pseudo-device ipfilter 322 323## for IPv6 324#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 325#pseudo-device faith # IPv[46] tcp relay translation i/f 326#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 327 328## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 329#pseudo-device vlan 330 331#### Audio and video devices 332 333## /dev/audio support 334audiocs* at ebus? # SUNW,CS4231 335audio* at audiocs? 336 337# wscons 338pckbc* at ebus? # PC keyboard controller 339pckbd* at pckbc? # PC keyboard 340pms* at pckbc? # PS/2 mouse for wsmouse 341igsfb* at pci? dev ? function ? 342wsdisplay* at igsfb? console ? 343wskbd* at pckbd? console ? 344wsmouse* at pms? mux 0 345 346 347#### Other device configuration 348 349## Pseudo ttys, required for network logins and programs like screen. 350 351pseudo-device pty # pseudo-terminals 352 353## Random device, used to implement /dev/random (a source of random noise), 354## and generate randomness for some kernel formulae. 355 356pseudo-device rnd 357 358# a pseudo device needed for Coda # also needs CODA (above) 359#pseudo-device vcoda 4 # coda minicache <-> venus comm. 360 361# wscons pseudo-devices 362pseudo-device wsmux # mouse & keyboard multiplexor 363pseudo-device wsfont 364 365pseudo-device clockctl # user control of clock subsystem 366pseudo-device ksyms # /dev/ksyms 367 368#pseudo-device pf # PF packet filter 369#pseudo-device pflog # PF log if 370#pseudo-device fss 4 # file system snapshot device 371 372#options FILEASSOC # fileassoc(9) 373 374# Veriexec 375# 376# a pseudo device needed for veriexec 377#pseudo-device veriexec 1 378# 379# Uncomment the fingerprint methods below that are desired. Note that 380# removing fingerprint methods will have almost no impact on the kernel 381# code size. 382# 383#options VERIFIED_EXEC_FP_RMD160 384#options VERIFIED_EXEC_FP_SHA256 385#options VERIFIED_EXEC_FP_SHA384 386#options VERIFIED_EXEC_FP_SHA512 387#options VERIFIED_EXEC_FP_SHA1 388#options VERIFIED_EXEC_FP_MD5 389 390#options PAX_MPROTECT=0 # PaX mprotect(2) restrictions 391 # (for static binaries only for now) 392